| /* |
| * Register interface file for Samsung Camera Interface (FIMC) driver |
| * |
| * Copyright (c) 2010 Samsung Electronics |
| * |
| * Sylwester Nawrocki, s.nawrocki@samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <mach/map.h> |
| #include <media/s5p_fimc.h> |
| |
| #include "fimc-core.h" |
| |
| |
| void fimc_hw_reset(struct fimc_dev *dev) |
| { |
| u32 cfg; |
| |
| cfg = readl(dev->regs + S5P_CISRCFMT); |
| cfg |= S5P_CISRCFMT_ITU601_8BIT; |
| writel(cfg, dev->regs + S5P_CISRCFMT); |
| |
| /* Software reset. */ |
| cfg = readl(dev->regs + S5P_CIGCTRL); |
| cfg |= (S5P_CIGCTRL_SWRST | S5P_CIGCTRL_IRQ_LEVEL); |
| writel(cfg, dev->regs + S5P_CIGCTRL); |
| udelay(1000); |
| |
| cfg = readl(dev->regs + S5P_CIGCTRL); |
| cfg &= ~S5P_CIGCTRL_SWRST; |
| writel(cfg, dev->regs + S5P_CIGCTRL); |
| } |
| |
| static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx) |
| { |
| u32 flip = S5P_MSCTRL_FLIP_NORMAL; |
| |
| switch (ctx->flip) { |
| case FLIP_X_AXIS: |
| flip = S5P_MSCTRL_FLIP_X_MIRROR; |
| break; |
| case FLIP_Y_AXIS: |
| flip = S5P_MSCTRL_FLIP_Y_MIRROR; |
| break; |
| case FLIP_XY_AXIS: |
| flip = S5P_MSCTRL_FLIP_180; |
| break; |
| default: |
| break; |
| } |
| if (ctx->rotation <= 90) |
| return flip; |
| |
| return (flip ^ S5P_MSCTRL_FLIP_180) & S5P_MSCTRL_FLIP_180; |
| } |
| |
| static u32 fimc_hw_get_target_flip(struct fimc_ctx *ctx) |
| { |
| u32 flip = S5P_CITRGFMT_FLIP_NORMAL; |
| |
| switch (ctx->flip) { |
| case FLIP_X_AXIS: |
| flip = S5P_CITRGFMT_FLIP_X_MIRROR; |
| break; |
| case FLIP_Y_AXIS: |
| flip = S5P_CITRGFMT_FLIP_Y_MIRROR; |
| break; |
| case FLIP_XY_AXIS: |
| flip = S5P_CITRGFMT_FLIP_180; |
| break; |
| default: |
| break; |
| } |
| if (ctx->rotation <= 90) |
| return flip; |
| |
| return (flip ^ S5P_CITRGFMT_FLIP_180) & S5P_CITRGFMT_FLIP_180; |
| } |
| |
| void fimc_hw_set_rotation(struct fimc_ctx *ctx) |
| { |
| u32 cfg, flip; |
| struct fimc_dev *dev = ctx->fimc_dev; |
| |
| cfg = readl(dev->regs + S5P_CITRGFMT); |
| cfg &= ~(S5P_CITRGFMT_INROT90 | S5P_CITRGFMT_OUTROT90 | |
| S5P_CITRGFMT_FLIP_180); |
| |
| /* |
| * The input and output rotator cannot work simultaneously. |
| * Use the output rotator in output DMA mode or the input rotator |
| * in direct fifo output mode. |
| */ |
| if (ctx->rotation == 90 || ctx->rotation == 270) { |
| if (ctx->out_path == FIMC_LCDFIFO) |
| cfg |= S5P_CITRGFMT_INROT90; |
| else |
| cfg |= S5P_CITRGFMT_OUTROT90; |
| } |
| |
| if (ctx->out_path == FIMC_DMA) { |
| cfg |= fimc_hw_get_target_flip(ctx); |
| writel(cfg, dev->regs + S5P_CITRGFMT); |
| } else { |
| /* LCD FIFO path */ |
| flip = readl(dev->regs + S5P_MSCTRL); |
| flip &= ~S5P_MSCTRL_FLIP_MASK; |
| flip |= fimc_hw_get_in_flip(ctx); |
| writel(flip, dev->regs + S5P_MSCTRL); |
| } |
| } |
| |
| void fimc_hw_set_target_format(struct fimc_ctx *ctx) |
| { |
| u32 cfg; |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_frame *frame = &ctx->d_frame; |
| |
| dbg("w= %d, h= %d color: %d", frame->width, |
| frame->height, frame->fmt->color); |
| |
| cfg = readl(dev->regs + S5P_CITRGFMT); |
| cfg &= ~(S5P_CITRGFMT_FMT_MASK | S5P_CITRGFMT_HSIZE_MASK | |
| S5P_CITRGFMT_VSIZE_MASK); |
| |
| switch (frame->fmt->color) { |
| case S5P_FIMC_RGB565...S5P_FIMC_RGB888: |
| cfg |= S5P_CITRGFMT_RGB; |
| break; |
| case S5P_FIMC_YCBCR420: |
| cfg |= S5P_CITRGFMT_YCBCR420; |
| break; |
| case S5P_FIMC_YCBYCR422...S5P_FIMC_CRYCBY422: |
| if (frame->fmt->colplanes == 1) |
| cfg |= S5P_CITRGFMT_YCBCR422_1P; |
| else |
| cfg |= S5P_CITRGFMT_YCBCR422; |
| break; |
| default: |
| break; |
| } |
| |
| if (ctx->rotation == 90 || ctx->rotation == 270) { |
| cfg |= S5P_CITRGFMT_HSIZE(frame->height); |
| cfg |= S5P_CITRGFMT_VSIZE(frame->width); |
| } else { |
| |
| cfg |= S5P_CITRGFMT_HSIZE(frame->width); |
| cfg |= S5P_CITRGFMT_VSIZE(frame->height); |
| } |
| |
| writel(cfg, dev->regs + S5P_CITRGFMT); |
| |
| cfg = readl(dev->regs + S5P_CITAREA) & ~S5P_CITAREA_MASK; |
| cfg |= (frame->width * frame->height); |
| writel(cfg, dev->regs + S5P_CITAREA); |
| } |
| |
| static void fimc_hw_set_out_dma_size(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_frame *frame = &ctx->d_frame; |
| u32 cfg; |
| |
| cfg = S5P_ORIG_SIZE_HOR(frame->f_width); |
| cfg |= S5P_ORIG_SIZE_VER(frame->f_height); |
| writel(cfg, dev->regs + S5P_ORGOSIZE); |
| |
| /* Select color space conversion equation (HD/SD size).*/ |
| cfg = readl(dev->regs + S5P_CIGCTRL); |
| if (frame->f_width >= 1280) /* HD */ |
| cfg |= S5P_CIGCTRL_CSC_ITU601_709; |
| else /* SD */ |
| cfg &= ~S5P_CIGCTRL_CSC_ITU601_709; |
| writel(cfg, dev->regs + S5P_CIGCTRL); |
| |
| } |
| |
| void fimc_hw_set_out_dma(struct fimc_ctx *ctx) |
| { |
| u32 cfg; |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_frame *frame = &ctx->d_frame; |
| struct fimc_dma_offset *offset = &frame->dma_offset; |
| |
| /* Set the input dma offsets. */ |
| cfg = 0; |
| cfg |= S5P_CIO_OFFS_HOR(offset->y_h); |
| cfg |= S5P_CIO_OFFS_VER(offset->y_v); |
| writel(cfg, dev->regs + S5P_CIOYOFF); |
| |
| cfg = 0; |
| cfg |= S5P_CIO_OFFS_HOR(offset->cb_h); |
| cfg |= S5P_CIO_OFFS_VER(offset->cb_v); |
| writel(cfg, dev->regs + S5P_CIOCBOFF); |
| |
| cfg = 0; |
| cfg |= S5P_CIO_OFFS_HOR(offset->cr_h); |
| cfg |= S5P_CIO_OFFS_VER(offset->cr_v); |
| writel(cfg, dev->regs + S5P_CIOCROFF); |
| |
| fimc_hw_set_out_dma_size(ctx); |
| |
| /* Configure chroma components order. */ |
| cfg = readl(dev->regs + S5P_CIOCTRL); |
| |
| cfg &= ~(S5P_CIOCTRL_ORDER2P_MASK | S5P_CIOCTRL_ORDER422_MASK | |
| S5P_CIOCTRL_YCBCR_PLANE_MASK); |
| |
| if (frame->fmt->colplanes == 1) |
| cfg |= ctx->out_order_1p; |
| else if (frame->fmt->colplanes == 2) |
| cfg |= ctx->out_order_2p | S5P_CIOCTRL_YCBCR_2PLANE; |
| else if (frame->fmt->colplanes == 3) |
| cfg |= S5P_CIOCTRL_YCBCR_3PLANE; |
| |
| writel(cfg, dev->regs + S5P_CIOCTRL); |
| } |
| |
| static void fimc_hw_en_autoload(struct fimc_dev *dev, int enable) |
| { |
| u32 cfg = readl(dev->regs + S5P_ORGISIZE); |
| if (enable) |
| cfg |= S5P_CIREAL_ISIZE_AUTOLOAD_EN; |
| else |
| cfg &= ~S5P_CIREAL_ISIZE_AUTOLOAD_EN; |
| writel(cfg, dev->regs + S5P_ORGISIZE); |
| } |
| |
| void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable) |
| { |
| u32 cfg = readl(dev->regs + S5P_CIOCTRL); |
| if (enable) |
| cfg |= S5P_CIOCTRL_LASTIRQ_ENABLE; |
| else |
| cfg &= ~S5P_CIOCTRL_LASTIRQ_ENABLE; |
| writel(cfg, dev->regs + S5P_CIOCTRL); |
| } |
| |
| void fimc_hw_set_prescaler(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_scaler *sc = &ctx->scaler; |
| u32 cfg, shfactor; |
| |
| shfactor = 10 - (sc->hfactor + sc->vfactor); |
| |
| cfg = S5P_CISCPRERATIO_SHFACTOR(shfactor); |
| cfg |= S5P_CISCPRERATIO_HOR(sc->pre_hratio); |
| cfg |= S5P_CISCPRERATIO_VER(sc->pre_vratio); |
| writel(cfg, dev->regs + S5P_CISCPRERATIO); |
| |
| cfg = S5P_CISCPREDST_WIDTH(sc->pre_dst_width); |
| cfg |= S5P_CISCPREDST_HEIGHT(sc->pre_dst_height); |
| writel(cfg, dev->regs + S5P_CISCPREDST); |
| } |
| |
| static void fimc_hw_set_scaler(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_scaler *sc = &ctx->scaler; |
| struct fimc_frame *src_frame = &ctx->s_frame; |
| struct fimc_frame *dst_frame = &ctx->d_frame; |
| u32 cfg = 0; |
| |
| if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW)) |
| cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE); |
| |
| if (!sc->enabled) |
| cfg |= S5P_CISCCTRL_SCALERBYPASS; |
| |
| if (sc->scaleup_h) |
| cfg |= S5P_CISCCTRL_SCALEUP_H; |
| |
| if (sc->scaleup_v) |
| cfg |= S5P_CISCCTRL_SCALEUP_V; |
| |
| if (sc->copy_mode) |
| cfg |= S5P_CISCCTRL_ONE2ONE; |
| |
| |
| if (ctx->in_path == FIMC_DMA) { |
| if (src_frame->fmt->color == S5P_FIMC_RGB565) |
| cfg |= S5P_CISCCTRL_INRGB_FMT_RGB565; |
| else if (src_frame->fmt->color == S5P_FIMC_RGB666) |
| cfg |= S5P_CISCCTRL_INRGB_FMT_RGB666; |
| else if (src_frame->fmt->color == S5P_FIMC_RGB888) |
| cfg |= S5P_CISCCTRL_INRGB_FMT_RGB888; |
| } |
| |
| if (ctx->out_path == FIMC_DMA) { |
| if (dst_frame->fmt->color == S5P_FIMC_RGB565) |
| cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB565; |
| else if (dst_frame->fmt->color == S5P_FIMC_RGB666) |
| cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB666; |
| else if (dst_frame->fmt->color == S5P_FIMC_RGB888) |
| cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888; |
| } else { |
| cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888; |
| |
| if (ctx->flags & FIMC_SCAN_MODE_INTERLACED) |
| cfg |= S5P_CISCCTRL_INTERLACE; |
| } |
| |
| writel(cfg, dev->regs + S5P_CISCCTRL); |
| } |
| |
| void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct samsung_fimc_variant *variant = dev->variant; |
| struct fimc_scaler *sc = &ctx->scaler; |
| u32 cfg; |
| |
| dbg("main_hratio= 0x%X main_vratio= 0x%X", |
| sc->main_hratio, sc->main_vratio); |
| |
| fimc_hw_set_scaler(ctx); |
| |
| cfg = readl(dev->regs + S5P_CISCCTRL); |
| |
| if (variant->has_mainscaler_ext) { |
| cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); |
| cfg |= S5P_CISCCTRL_MHRATIO_EXT(sc->main_hratio); |
| cfg |= S5P_CISCCTRL_MVRATIO_EXT(sc->main_vratio); |
| writel(cfg, dev->regs + S5P_CISCCTRL); |
| |
| cfg = readl(dev->regs + S5P_CIEXTEN); |
| |
| cfg &= ~(S5P_CIEXTEN_MVRATIO_EXT_MASK | |
| S5P_CIEXTEN_MHRATIO_EXT_MASK); |
| cfg |= S5P_CIEXTEN_MHRATIO_EXT(sc->main_hratio); |
| cfg |= S5P_CIEXTEN_MVRATIO_EXT(sc->main_vratio); |
| writel(cfg, dev->regs + S5P_CIEXTEN); |
| } else { |
| cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); |
| cfg |= S5P_CISCCTRL_MHRATIO(sc->main_hratio); |
| cfg |= S5P_CISCCTRL_MVRATIO(sc->main_vratio); |
| writel(cfg, dev->regs + S5P_CISCCTRL); |
| } |
| } |
| |
| void fimc_hw_en_capture(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| |
| u32 cfg = readl(dev->regs + S5P_CIIMGCPT); |
| |
| if (ctx->out_path == FIMC_DMA) { |
| /* one shot mode */ |
| cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE | S5P_CIIMGCPT_IMGCPTEN; |
| } else { |
| /* Continous frame capture mode (freerun). */ |
| cfg &= ~(S5P_CIIMGCPT_CPT_FREN_ENABLE | |
| S5P_CIIMGCPT_CPT_FRMOD_CNT); |
| cfg |= S5P_CIIMGCPT_IMGCPTEN; |
| } |
| |
| if (ctx->scaler.enabled) |
| cfg |= S5P_CIIMGCPT_IMGCPTEN_SC; |
| |
| writel(cfg | S5P_CIIMGCPT_IMGCPTEN, dev->regs + S5P_CIIMGCPT); |
| } |
| |
| void fimc_hw_set_effect(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_effect *effect = &ctx->effect; |
| u32 cfg = (S5P_CIIMGEFF_IE_ENABLE | S5P_CIIMGEFF_IE_SC_AFTER); |
| |
| cfg |= effect->type; |
| |
| if (effect->type == S5P_FIMC_EFFECT_ARBITRARY) { |
| cfg |= S5P_CIIMGEFF_PAT_CB(effect->pat_cb); |
| cfg |= S5P_CIIMGEFF_PAT_CR(effect->pat_cr); |
| } |
| |
| writel(cfg, dev->regs + S5P_CIIMGEFF); |
| } |
| |
| static void fimc_hw_set_in_dma_size(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_frame *frame = &ctx->s_frame; |
| u32 cfg_o = 0; |
| u32 cfg_r = 0; |
| |
| if (FIMC_LCDFIFO == ctx->out_path) |
| cfg_r |= S5P_CIREAL_ISIZE_AUTOLOAD_EN; |
| |
| cfg_o |= S5P_ORIG_SIZE_HOR(frame->f_width); |
| cfg_o |= S5P_ORIG_SIZE_VER(frame->f_height); |
| cfg_r |= S5P_CIREAL_ISIZE_WIDTH(frame->width); |
| cfg_r |= S5P_CIREAL_ISIZE_HEIGHT(frame->height); |
| |
| writel(cfg_o, dev->regs + S5P_ORGISIZE); |
| writel(cfg_r, dev->regs + S5P_CIREAL_ISIZE); |
| } |
| |
| void fimc_hw_set_in_dma(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| struct fimc_frame *frame = &ctx->s_frame; |
| struct fimc_dma_offset *offset = &frame->dma_offset; |
| u32 cfg; |
| |
| /* Set the pixel offsets. */ |
| cfg = S5P_CIO_OFFS_HOR(offset->y_h); |
| cfg |= S5P_CIO_OFFS_VER(offset->y_v); |
| writel(cfg, dev->regs + S5P_CIIYOFF); |
| |
| cfg = S5P_CIO_OFFS_HOR(offset->cb_h); |
| cfg |= S5P_CIO_OFFS_VER(offset->cb_v); |
| writel(cfg, dev->regs + S5P_CIICBOFF); |
| |
| cfg = S5P_CIO_OFFS_HOR(offset->cr_h); |
| cfg |= S5P_CIO_OFFS_VER(offset->cr_v); |
| writel(cfg, dev->regs + S5P_CIICROFF); |
| |
| /* Input original and real size. */ |
| fimc_hw_set_in_dma_size(ctx); |
| |
| /* Use DMA autoload only in FIFO mode. */ |
| fimc_hw_en_autoload(dev, ctx->out_path == FIMC_LCDFIFO); |
| |
| /* Set the input DMA to process single frame only. */ |
| cfg = readl(dev->regs + S5P_MSCTRL); |
| cfg &= ~(S5P_MSCTRL_INFORMAT_MASK |
| | S5P_MSCTRL_IN_BURST_COUNT_MASK |
| | S5P_MSCTRL_INPUT_MASK |
| | S5P_MSCTRL_C_INT_IN_MASK |
| | S5P_MSCTRL_2P_IN_ORDER_MASK); |
| |
| cfg |= (S5P_MSCTRL_IN_BURST_COUNT(4) |
| | S5P_MSCTRL_INPUT_MEMORY |
| | S5P_MSCTRL_FIFO_CTRL_FULL); |
| |
| switch (frame->fmt->color) { |
| case S5P_FIMC_RGB565...S5P_FIMC_RGB888: |
| cfg |= S5P_MSCTRL_INFORMAT_RGB; |
| break; |
| case S5P_FIMC_YCBCR420: |
| cfg |= S5P_MSCTRL_INFORMAT_YCBCR420; |
| |
| if (frame->fmt->colplanes == 2) |
| cfg |= ctx->in_order_2p | S5P_MSCTRL_C_INT_IN_2PLANE; |
| else |
| cfg |= S5P_MSCTRL_C_INT_IN_3PLANE; |
| |
| break; |
| case S5P_FIMC_YCBYCR422...S5P_FIMC_CRYCBY422: |
| if (frame->fmt->colplanes == 1) { |
| cfg |= ctx->in_order_1p |
| | S5P_MSCTRL_INFORMAT_YCBCR422_1P; |
| } else { |
| cfg |= S5P_MSCTRL_INFORMAT_YCBCR422; |
| |
| if (frame->fmt->colplanes == 2) |
| cfg |= ctx->in_order_2p |
| | S5P_MSCTRL_C_INT_IN_2PLANE; |
| else |
| cfg |= S5P_MSCTRL_C_INT_IN_3PLANE; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| writel(cfg, dev->regs + S5P_MSCTRL); |
| |
| /* Input/output DMA linear/tiled mode. */ |
| cfg = readl(dev->regs + S5P_CIDMAPARAM); |
| cfg &= ~S5P_CIDMAPARAM_TILE_MASK; |
| |
| if (tiled_fmt(ctx->s_frame.fmt)) |
| cfg |= S5P_CIDMAPARAM_R_64X32; |
| |
| if (tiled_fmt(ctx->d_frame.fmt)) |
| cfg |= S5P_CIDMAPARAM_W_64X32; |
| |
| writel(cfg, dev->regs + S5P_CIDMAPARAM); |
| } |
| |
| |
| void fimc_hw_set_input_path(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| |
| u32 cfg = readl(dev->regs + S5P_MSCTRL); |
| cfg &= ~S5P_MSCTRL_INPUT_MASK; |
| |
| if (ctx->in_path == FIMC_DMA) |
| cfg |= S5P_MSCTRL_INPUT_MEMORY; |
| else |
| cfg |= S5P_MSCTRL_INPUT_EXTCAM; |
| |
| writel(cfg, dev->regs + S5P_MSCTRL); |
| } |
| |
| void fimc_hw_set_output_path(struct fimc_ctx *ctx) |
| { |
| struct fimc_dev *dev = ctx->fimc_dev; |
| |
| u32 cfg = readl(dev->regs + S5P_CISCCTRL); |
| cfg &= ~S5P_CISCCTRL_LCDPATHEN_FIFO; |
| if (ctx->out_path == FIMC_LCDFIFO) |
| cfg |= S5P_CISCCTRL_LCDPATHEN_FIFO; |
| writel(cfg, dev->regs + S5P_CISCCTRL); |
| } |
| |
| void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr) |
| { |
| u32 cfg = readl(dev->regs + S5P_CIREAL_ISIZE); |
| cfg |= S5P_CIREAL_ISIZE_ADDR_CH_DIS; |
| writel(cfg, dev->regs + S5P_CIREAL_ISIZE); |
| |
| writel(paddr->y, dev->regs + S5P_CIIYSA(0)); |
| writel(paddr->cb, dev->regs + S5P_CIICBSA(0)); |
| writel(paddr->cr, dev->regs + S5P_CIICRSA(0)); |
| |
| cfg &= ~S5P_CIREAL_ISIZE_ADDR_CH_DIS; |
| writel(cfg, dev->regs + S5P_CIREAL_ISIZE); |
| } |
| |
| void fimc_hw_set_output_addr(struct fimc_dev *dev, |
| struct fimc_addr *paddr, int index) |
| { |
| int i = (index == -1) ? 0 : index; |
| do { |
| writel(paddr->y, dev->regs + S5P_CIOYSA(i)); |
| writel(paddr->cb, dev->regs + S5P_CIOCBSA(i)); |
| writel(paddr->cr, dev->regs + S5P_CIOCRSA(i)); |
| dbg("dst_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X", |
| i, paddr->y, paddr->cb, paddr->cr); |
| } while (index == -1 && ++i < FIMC_MAX_OUT_BUFS); |
| } |
| |
| int fimc_hw_set_camera_polarity(struct fimc_dev *fimc, |
| struct s5p_fimc_isp_info *cam) |
| { |
| u32 cfg = readl(fimc->regs + S5P_CIGCTRL); |
| |
| cfg &= ~(S5P_CIGCTRL_INVPOLPCLK | S5P_CIGCTRL_INVPOLVSYNC | |
| S5P_CIGCTRL_INVPOLHREF | S5P_CIGCTRL_INVPOLHSYNC); |
| |
| if (cam->flags & FIMC_CLK_INV_PCLK) |
| cfg |= S5P_CIGCTRL_INVPOLPCLK; |
| |
| if (cam->flags & FIMC_CLK_INV_VSYNC) |
| cfg |= S5P_CIGCTRL_INVPOLVSYNC; |
| |
| if (cam->flags & FIMC_CLK_INV_HREF) |
| cfg |= S5P_CIGCTRL_INVPOLHREF; |
| |
| if (cam->flags & FIMC_CLK_INV_HSYNC) |
| cfg |= S5P_CIGCTRL_INVPOLHSYNC; |
| |
| writel(cfg, fimc->regs + S5P_CIGCTRL); |
| |
| return 0; |
| } |
| |
| int fimc_hw_set_camera_source(struct fimc_dev *fimc, |
| struct s5p_fimc_isp_info *cam) |
| { |
| struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame; |
| u32 cfg = 0; |
| u32 bus_width; |
| int i; |
| |
| static const struct { |
| u32 pixelcode; |
| u32 cisrcfmt; |
| u16 bus_width; |
| } pix_desc[] = { |
| { V4L2_MBUS_FMT_YUYV8_2X8, S5P_CISRCFMT_ORDER422_YCBYCR, 8 }, |
| { V4L2_MBUS_FMT_YVYU8_2X8, S5P_CISRCFMT_ORDER422_YCRYCB, 8 }, |
| { V4L2_MBUS_FMT_VYUY8_2X8, S5P_CISRCFMT_ORDER422_CRYCBY, 8 }, |
| { V4L2_MBUS_FMT_UYVY8_2X8, S5P_CISRCFMT_ORDER422_CBYCRY, 8 }, |
| /* TODO: Add pixel codes for 16-bit bus width */ |
| }; |
| |
| if (cam->bus_type == FIMC_ITU_601 || cam->bus_type == FIMC_ITU_656) { |
| for (i = 0; i < ARRAY_SIZE(pix_desc); i++) { |
| if (fimc->vid_cap.fmt.code == pix_desc[i].pixelcode) { |
| cfg = pix_desc[i].cisrcfmt; |
| bus_width = pix_desc[i].bus_width; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(pix_desc)) { |
| v4l2_err(&fimc->vid_cap.v4l2_dev, |
| "Camera color format not supported: %d\n", |
| fimc->vid_cap.fmt.code); |
| return -EINVAL; |
| } |
| |
| if (cam->bus_type == FIMC_ITU_601) { |
| if (bus_width == 8) |
| cfg |= S5P_CISRCFMT_ITU601_8BIT; |
| else if (bus_width == 16) |
| cfg |= S5P_CISRCFMT_ITU601_16BIT; |
| } /* else defaults to ITU-R BT.656 8-bit */ |
| } |
| |
| cfg |= S5P_CISRCFMT_HSIZE(f->o_width) | S5P_CISRCFMT_VSIZE(f->o_height); |
| writel(cfg, fimc->regs + S5P_CISRCFMT); |
| return 0; |
| } |
| |
| |
| int fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f) |
| { |
| u32 hoff2, voff2; |
| |
| u32 cfg = readl(fimc->regs + S5P_CIWDOFST); |
| |
| cfg &= ~(S5P_CIWDOFST_HOROFF_MASK | S5P_CIWDOFST_VEROFF_MASK); |
| cfg |= S5P_CIWDOFST_OFF_EN | |
| S5P_CIWDOFST_HOROFF(f->offs_h) | |
| S5P_CIWDOFST_VEROFF(f->offs_v); |
| |
| writel(cfg, fimc->regs + S5P_CIWDOFST); |
| |
| /* See CIWDOFSTn register description in the datasheet for details. */ |
| hoff2 = f->o_width - f->width - f->offs_h; |
| voff2 = f->o_height - f->height - f->offs_v; |
| cfg = S5P_CIWDOFST2_HOROFF(hoff2) | S5P_CIWDOFST2_VEROFF(voff2); |
| |
| writel(cfg, fimc->regs + S5P_CIWDOFST2); |
| return 0; |
| } |
| |
| int fimc_hw_set_camera_type(struct fimc_dev *fimc, |
| struct s5p_fimc_isp_info *cam) |
| { |
| u32 cfg, tmp; |
| struct fimc_vid_cap *vid_cap = &fimc->vid_cap; |
| |
| cfg = readl(fimc->regs + S5P_CIGCTRL); |
| |
| /* Select ITU B interface, disable Writeback path and test pattern. */ |
| cfg &= ~(S5P_CIGCTRL_TESTPAT_MASK | S5P_CIGCTRL_SELCAM_ITU_A | |
| S5P_CIGCTRL_SELCAM_MIPI | S5P_CIGCTRL_CAMIF_SELWB | |
| S5P_CIGCTRL_SELCAM_MIPI_A); |
| |
| if (cam->bus_type == FIMC_MIPI_CSI2) { |
| cfg |= S5P_CIGCTRL_SELCAM_MIPI; |
| |
| if (cam->mux_id == 0) |
| cfg |= S5P_CIGCTRL_SELCAM_MIPI_A; |
| |
| /* TODO: add remaining supported formats. */ |
| if (vid_cap->fmt.code == V4L2_MBUS_FMT_VYUY8_2X8) { |
| tmp = S5P_CSIIMGFMT_YCBCR422_8BIT; |
| } else { |
| err("camera image format not supported: %d", |
| vid_cap->fmt.code); |
| return -EINVAL; |
| } |
| tmp |= (cam->csi_data_align == 32) << 8; |
| |
| writel(tmp, fimc->regs + S5P_CSIIMGFMT); |
| |
| } else if (cam->bus_type == FIMC_ITU_601 || |
| cam->bus_type == FIMC_ITU_656) { |
| if (cam->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */ |
| cfg |= S5P_CIGCTRL_SELCAM_ITU_A; |
| } else if (cam->bus_type == FIMC_LCD_WB) { |
| cfg |= S5P_CIGCTRL_CAMIF_SELWB; |
| } else { |
| err("invalid camera bus type selected\n"); |
| return -EINVAL; |
| } |
| writel(cfg, fimc->regs + S5P_CIGCTRL); |
| |
| return 0; |
| } |