| /* |
| * cxgb3i_offload.c: Chelsio S3xx iscsi offloaded tcp connection management |
| * |
| * Copyright (C) 2003-2008 Chelsio Communications. All rights reserved. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this |
| * release for licensing terms and conditions. |
| * |
| * Written by: Dimitris Michailidis (dm@chelsio.com) |
| * Karen Xie (kxie@chelsio.com) |
| */ |
| |
| #include <linux/if_vlan.h> |
| #include <linux/version.h> |
| |
| #include "cxgb3_defs.h" |
| #include "cxgb3_ctl_defs.h" |
| #include "firmware_exports.h" |
| #include "cxgb3i_offload.h" |
| #include "cxgb3i_pdu.h" |
| #include "cxgb3i_ddp.h" |
| |
| #ifdef __DEBUG_C3CN_CONN__ |
| #define c3cn_conn_debug cxgb3i_log_debug |
| #else |
| #define c3cn_conn_debug(fmt...) |
| #endif |
| |
| #ifdef __DEBUG_C3CN_TX__ |
| #define c3cn_tx_debug cxgb3i_log_debug |
| #else |
| #define c3cn_tx_debug(fmt...) |
| #endif |
| |
| #ifdef __DEBUG_C3CN_RX__ |
| #define c3cn_rx_debug cxgb3i_log_debug |
| #else |
| #define c3cn_rx_debug(fmt...) |
| #endif |
| |
| /* |
| * module parameters releated to offloaded iscsi connection |
| */ |
| static int cxgb3_rcv_win = 256 * 1024; |
| module_param(cxgb3_rcv_win, int, 0644); |
| MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)"); |
| |
| static int cxgb3_snd_win = 128 * 1024; |
| module_param(cxgb3_snd_win, int, 0644); |
| MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=128KB)"); |
| |
| static int cxgb3_rx_credit_thres = 10 * 1024; |
| module_param(cxgb3_rx_credit_thres, int, 0644); |
| MODULE_PARM_DESC(rx_credit_thres, |
| "RX credits return threshold in bytes (default=10KB)"); |
| |
| static unsigned int cxgb3_max_connect = 8 * 1024; |
| module_param(cxgb3_max_connect, uint, 0644); |
| MODULE_PARM_DESC(cxgb3_max_connect, "Max. # of connections (default=8092)"); |
| |
| static unsigned int cxgb3_sport_base = 20000; |
| module_param(cxgb3_sport_base, uint, 0644); |
| MODULE_PARM_DESC(cxgb3_sport_base, "starting port number (default=20000)"); |
| |
| /* |
| * cxgb3i tcp connection data(per adapter) list |
| */ |
| static LIST_HEAD(cdata_list); |
| static DEFINE_RWLOCK(cdata_rwlock); |
| |
| static int c3cn_push_tx_frames(struct s3_conn *c3cn, int req_completion); |
| static void c3cn_release_offload_resources(struct s3_conn *c3cn); |
| |
| /* |
| * iscsi source port management |
| * |
| * Find a free source port in the port allocation map. We use a very simple |
| * rotor scheme to look for the next free port. |
| * |
| * If a source port has been specified make sure that it doesn't collide with |
| * our normal source port allocation map. If it's outside the range of our |
| * allocation/deallocation scheme just let them use it. |
| * |
| * If the source port is outside our allocation range, the caller is |
| * responsible for keeping track of their port usage. |
| */ |
| static int c3cn_get_port(struct s3_conn *c3cn, struct cxgb3i_sdev_data *cdata) |
| { |
| unsigned int start; |
| int idx; |
| |
| if (!cdata) |
| goto error_out; |
| |
| if (c3cn->saddr.sin_port) { |
| cxgb3i_log_error("connect, sin_port NON-ZERO %u.\n", |
| c3cn->saddr.sin_port); |
| return -EADDRINUSE; |
| } |
| |
| spin_lock_bh(&cdata->lock); |
| start = idx = cdata->sport_next; |
| do { |
| if (++idx >= cxgb3_max_connect) |
| idx = 0; |
| if (!cdata->sport_conn[idx]) { |
| c3cn->saddr.sin_port = htons(cxgb3_sport_base + idx); |
| cdata->sport_next = idx; |
| cdata->sport_conn[idx] = c3cn; |
| spin_unlock_bh(&cdata->lock); |
| |
| c3cn_conn_debug("%s reserve port %u.\n", |
| cdata->cdev->name, |
| cxgb3_sport_base + idx); |
| return 0; |
| } |
| } while (idx != start); |
| spin_unlock_bh(&cdata->lock); |
| |
| error_out: |
| return -EADDRNOTAVAIL; |
| } |
| |
| static void c3cn_put_port(struct s3_conn *c3cn) |
| { |
| if (!c3cn->cdev) |
| return; |
| |
| if (c3cn->saddr.sin_port) { |
| struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(c3cn->cdev); |
| int idx = ntohs(c3cn->saddr.sin_port) - cxgb3_sport_base; |
| |
| c3cn->saddr.sin_port = 0; |
| if (idx < 0 || idx >= cxgb3_max_connect) |
| return; |
| spin_lock_bh(&cdata->lock); |
| cdata->sport_conn[idx] = NULL; |
| spin_unlock_bh(&cdata->lock); |
| c3cn_conn_debug("%s, release port %u.\n", |
| cdata->cdev->name, cxgb3_sport_base + idx); |
| } |
| } |
| |
| static inline void c3cn_set_flag(struct s3_conn *c3cn, enum c3cn_flags flag) |
| { |
| __set_bit(flag, &c3cn->flags); |
| c3cn_conn_debug("c3cn 0x%p, set %d, s %u, f 0x%lx.\n", |
| c3cn, flag, c3cn->state, c3cn->flags); |
| } |
| |
| static inline void c3cn_clear_flag(struct s3_conn *c3cn, enum c3cn_flags flag) |
| { |
| __clear_bit(flag, &c3cn->flags); |
| c3cn_conn_debug("c3cn 0x%p, clear %d, s %u, f 0x%lx.\n", |
| c3cn, flag, c3cn->state, c3cn->flags); |
| } |
| |
| static inline int c3cn_flag(struct s3_conn *c3cn, enum c3cn_flags flag) |
| { |
| if (c3cn == NULL) |
| return 0; |
| return test_bit(flag, &c3cn->flags); |
| } |
| |
| static void c3cn_set_state(struct s3_conn *c3cn, int state) |
| { |
| c3cn_conn_debug("c3cn 0x%p state -> %u.\n", c3cn, state); |
| c3cn->state = state; |
| } |
| |
| static inline void c3cn_hold(struct s3_conn *c3cn) |
| { |
| atomic_inc(&c3cn->refcnt); |
| } |
| |
| static inline void c3cn_put(struct s3_conn *c3cn) |
| { |
| if (atomic_dec_and_test(&c3cn->refcnt)) { |
| c3cn_conn_debug("free c3cn 0x%p, s %u, f 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| kfree(c3cn); |
| } |
| } |
| |
| static void c3cn_closed(struct s3_conn *c3cn) |
| { |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| c3cn_put_port(c3cn); |
| c3cn_release_offload_resources(c3cn); |
| c3cn_set_state(c3cn, C3CN_STATE_CLOSED); |
| cxgb3i_conn_closing(c3cn); |
| } |
| |
| /* |
| * CPL (Chelsio Protocol Language) defines a message passing interface between |
| * the host driver and T3 asic. |
| * The section below implments CPLs that related to iscsi tcp connection |
| * open/close/abort and data send/receive. |
| */ |
| |
| /* |
| * CPL connection active open request: host -> |
| */ |
| static unsigned int find_best_mtu(const struct t3c_data *d, unsigned short mtu) |
| { |
| int i = 0; |
| |
| while (i < d->nmtus - 1 && d->mtus[i + 1] <= mtu) |
| ++i; |
| return i; |
| } |
| |
| static unsigned int select_mss(struct s3_conn *c3cn, unsigned int pmtu) |
| { |
| unsigned int idx; |
| struct dst_entry *dst = c3cn->dst_cache; |
| struct t3cdev *cdev = c3cn->cdev; |
| const struct t3c_data *td = T3C_DATA(cdev); |
| u16 advmss = dst_metric(dst, RTAX_ADVMSS); |
| |
| if (advmss > pmtu - 40) |
| advmss = pmtu - 40; |
| if (advmss < td->mtus[0] - 40) |
| advmss = td->mtus[0] - 40; |
| idx = find_best_mtu(td, advmss + 40); |
| return idx; |
| } |
| |
| static inline int compute_wscale(int win) |
| { |
| int wscale = 0; |
| while (wscale < 14 && (65535<<wscale) < win) |
| wscale++; |
| return wscale; |
| } |
| |
| static inline unsigned int calc_opt0h(struct s3_conn *c3cn) |
| { |
| int wscale = compute_wscale(cxgb3_rcv_win); |
| return V_KEEP_ALIVE(1) | |
| F_TCAM_BYPASS | |
| V_WND_SCALE(wscale) | |
| V_MSS_IDX(c3cn->mss_idx); |
| } |
| |
| static inline unsigned int calc_opt0l(struct s3_conn *c3cn) |
| { |
| return V_ULP_MODE(ULP_MODE_ISCSI) | |
| V_RCV_BUFSIZ(cxgb3_rcv_win>>10); |
| } |
| |
| static void make_act_open_req(struct s3_conn *c3cn, struct sk_buff *skb, |
| unsigned int atid, const struct l2t_entry *e) |
| { |
| struct cpl_act_open_req *req; |
| |
| c3cn_conn_debug("c3cn 0x%p, atid 0x%x.\n", c3cn, atid); |
| |
| skb->priority = CPL_PRIORITY_SETUP; |
| req = (struct cpl_act_open_req *)__skb_put(skb, sizeof(*req)); |
| req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, atid)); |
| req->local_port = c3cn->saddr.sin_port; |
| req->peer_port = c3cn->daddr.sin_port; |
| req->local_ip = c3cn->saddr.sin_addr.s_addr; |
| req->peer_ip = c3cn->daddr.sin_addr.s_addr; |
| req->opt0h = htonl(calc_opt0h(c3cn) | V_L2T_IDX(e->idx) | |
| V_TX_CHANNEL(e->smt_idx)); |
| req->opt0l = htonl(calc_opt0l(c3cn)); |
| req->params = 0; |
| } |
| |
| static void fail_act_open(struct s3_conn *c3cn, int errno) |
| { |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| c3cn->err = errno; |
| c3cn_closed(c3cn); |
| } |
| |
| static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) |
| { |
| struct s3_conn *c3cn = (struct s3_conn *)skb->sk; |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); |
| |
| c3cn_hold(c3cn); |
| spin_lock_bh(&c3cn->lock); |
| if (c3cn->state == C3CN_STATE_CONNECTING) |
| fail_act_open(c3cn, EHOSTUNREACH); |
| spin_unlock_bh(&c3cn->lock); |
| c3cn_put(c3cn); |
| __kfree_skb(skb); |
| } |
| |
| /* |
| * CPL connection close request: host -> |
| * |
| * Close a connection by sending a CPL_CLOSE_CON_REQ message and queue it to |
| * the write queue (i.e., after any unsent txt data). |
| */ |
| static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb, |
| int flags) |
| { |
| skb_tcp_seq(skb) = c3cn->write_seq; |
| skb_flags(skb) = flags; |
| __skb_queue_tail(&c3cn->write_queue, skb); |
| } |
| |
| static void send_close_req(struct s3_conn *c3cn) |
| { |
| struct sk_buff *skb = c3cn->cpl_close; |
| struct cpl_close_con_req *req = (struct cpl_close_con_req *)skb->head; |
| unsigned int tid = c3cn->tid; |
| |
| c3cn_conn_debug("c3cn 0x%p, state 0x%x, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| c3cn->cpl_close = NULL; |
| |
| req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); |
| req->wr.wr_lo = htonl(V_WR_TID(tid)); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, tid)); |
| req->rsvd = htonl(c3cn->write_seq); |
| |
| skb_entail(c3cn, skb, C3CB_FLAG_NO_APPEND); |
| if (c3cn->state != C3CN_STATE_CONNECTING) |
| c3cn_push_tx_frames(c3cn, 1); |
| } |
| |
| /* |
| * CPL connection abort request: host -> |
| * |
| * Send an ABORT_REQ message. Makes sure we do not send multiple ABORT_REQs |
| * for the same connection and also that we do not try to send a message |
| * after the connection has closed. |
| */ |
| static void abort_arp_failure(struct t3cdev *cdev, struct sk_buff *skb) |
| { |
| struct cpl_abort_req *req = cplhdr(skb); |
| |
| c3cn_conn_debug("tdev 0x%p.\n", cdev); |
| |
| req->cmd = CPL_ABORT_NO_RST; |
| cxgb3_ofld_send(cdev, skb); |
| } |
| |
| static inline void c3cn_purge_write_queue(struct s3_conn *c3cn) |
| { |
| struct sk_buff *skb; |
| |
| while ((skb = __skb_dequeue(&c3cn->write_queue))) |
| __kfree_skb(skb); |
| } |
| |
| static void send_abort_req(struct s3_conn *c3cn) |
| { |
| struct sk_buff *skb = c3cn->cpl_abort_req; |
| struct cpl_abort_req *req; |
| unsigned int tid = c3cn->tid; |
| |
| if (unlikely(c3cn->state == C3CN_STATE_ABORTING) || !skb || |
| !c3cn->cdev) |
| return; |
| |
| c3cn_set_state(c3cn, C3CN_STATE_ABORTING); |
| |
| c3cn_conn_debug("c3cn 0x%p, flag ABORT_RPL + ABORT_SHUT.\n", c3cn); |
| |
| c3cn_set_flag(c3cn, C3CN_ABORT_RPL_PENDING); |
| |
| /* Purge the send queue so we don't send anything after an abort. */ |
| c3cn_purge_write_queue(c3cn); |
| |
| c3cn->cpl_abort_req = NULL; |
| req = (struct cpl_abort_req *)skb->head; |
| |
| skb->priority = CPL_PRIORITY_DATA; |
| set_arp_failure_handler(skb, abort_arp_failure); |
| |
| req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ)); |
| req->wr.wr_lo = htonl(V_WR_TID(tid)); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, tid)); |
| req->rsvd0 = htonl(c3cn->snd_nxt); |
| req->rsvd1 = !c3cn_flag(c3cn, C3CN_TX_DATA_SENT); |
| req->cmd = CPL_ABORT_SEND_RST; |
| |
| l2t_send(c3cn->cdev, skb, c3cn->l2t); |
| } |
| |
| /* |
| * CPL connection abort reply: host -> |
| * |
| * Send an ABORT_RPL message in response of the ABORT_REQ received. |
| */ |
| static void send_abort_rpl(struct s3_conn *c3cn, int rst_status) |
| { |
| struct sk_buff *skb = c3cn->cpl_abort_rpl; |
| struct cpl_abort_rpl *rpl = (struct cpl_abort_rpl *)skb->head; |
| |
| c3cn->cpl_abort_rpl = NULL; |
| |
| skb->priority = CPL_PRIORITY_DATA; |
| rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); |
| rpl->wr.wr_lo = htonl(V_WR_TID(c3cn->tid)); |
| OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, c3cn->tid)); |
| rpl->cmd = rst_status; |
| |
| cxgb3_ofld_send(c3cn->cdev, skb); |
| } |
| |
| /* |
| * CPL connection rx data ack: host -> |
| * Send RX credits through an RX_DATA_ACK CPL message. Returns the number of |
| * credits sent. |
| */ |
| static u32 send_rx_credits(struct s3_conn *c3cn, u32 credits, u32 dack) |
| { |
| struct sk_buff *skb; |
| struct cpl_rx_data_ack *req; |
| |
| skb = alloc_skb(sizeof(*req), GFP_ATOMIC); |
| if (!skb) |
| return 0; |
| |
| req = (struct cpl_rx_data_ack *)__skb_put(skb, sizeof(*req)); |
| req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); |
| OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, c3cn->tid)); |
| req->credit_dack = htonl(dack | V_RX_CREDITS(credits)); |
| skb->priority = CPL_PRIORITY_ACK; |
| cxgb3_ofld_send(c3cn->cdev, skb); |
| return credits; |
| } |
| |
| /* |
| * CPL connection tx data: host -> |
| * |
| * Send iscsi PDU via TX_DATA CPL message. Returns the number of |
| * credits sent. |
| * Each TX_DATA consumes work request credit (wrs), so we need to keep track of |
| * how many we've used so far and how many are pending (i.e., yet ack'ed by T3). |
| */ |
| |
| /* |
| * For ULP connections HW may inserts digest bytes into the pdu. Those digest |
| * bytes are not sent by the host but are part of the TCP payload and therefore |
| * consume TCP sequence space. |
| */ |
| static const unsigned int cxgb3_ulp_extra_len[] = { 0, 4, 4, 8 }; |
| static inline unsigned int ulp_extra_len(const struct sk_buff *skb) |
| { |
| return cxgb3_ulp_extra_len[skb_ulp_mode(skb) & 3]; |
| } |
| |
| static unsigned int wrlen __read_mostly; |
| |
| /* |
| * The number of WRs needed for an skb depends on the number of fragments |
| * in the skb and whether it has any payload in its main body. This maps the |
| * length of the gather list represented by an skb into the # of necessary WRs. |
| * The extra two fragments are for iscsi bhs and payload padding. |
| */ |
| #define SKB_WR_LIST_SIZE (MAX_SKB_FRAGS + 2) |
| static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly; |
| |
| static void s3_init_wr_tab(unsigned int wr_len) |
| { |
| int i; |
| |
| if (skb_wrs[1]) /* already initialized */ |
| return; |
| |
| for (i = 1; i < SKB_WR_LIST_SIZE; i++) { |
| int sgl_len = (3 * i) / 2 + (i & 1); |
| |
| sgl_len += 3; |
| skb_wrs[i] = (sgl_len <= wr_len |
| ? 1 : 1 + (sgl_len - 2) / (wr_len - 1)); |
| } |
| |
| wrlen = wr_len * 8; |
| } |
| |
| static inline void reset_wr_list(struct s3_conn *c3cn) |
| { |
| c3cn->wr_pending_head = c3cn->wr_pending_tail = NULL; |
| } |
| |
| /* |
| * Add a WR to a connections's list of pending WRs. This is a singly-linked |
| * list of sk_buffs operating as a FIFO. The head is kept in wr_pending_head |
| * and the tail in wr_pending_tail. |
| */ |
| static inline void enqueue_wr(struct s3_conn *c3cn, |
| struct sk_buff *skb) |
| { |
| skb_tx_wr_next(skb) = NULL; |
| |
| /* |
| * We want to take an extra reference since both us and the driver |
| * need to free the packet before it's really freed. We know there's |
| * just one user currently so we use atomic_set rather than skb_get |
| * to avoid the atomic op. |
| */ |
| atomic_set(&skb->users, 2); |
| |
| if (!c3cn->wr_pending_head) |
| c3cn->wr_pending_head = skb; |
| else |
| skb_tx_wr_next(c3cn->wr_pending_tail) = skb; |
| c3cn->wr_pending_tail = skb; |
| } |
| |
| static int count_pending_wrs(struct s3_conn *c3cn) |
| { |
| int n = 0; |
| const struct sk_buff *skb = c3cn->wr_pending_head; |
| |
| while (skb) { |
| n += skb->csum; |
| skb = skb_tx_wr_next(skb); |
| } |
| return n; |
| } |
| |
| static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn) |
| { |
| return c3cn->wr_pending_head; |
| } |
| |
| static inline void free_wr_skb(struct sk_buff *skb) |
| { |
| kfree_skb(skb); |
| } |
| |
| static inline struct sk_buff *dequeue_wr(struct s3_conn *c3cn) |
| { |
| struct sk_buff *skb = c3cn->wr_pending_head; |
| |
| if (likely(skb)) { |
| /* Don't bother clearing the tail */ |
| c3cn->wr_pending_head = skb_tx_wr_next(skb); |
| skb_tx_wr_next(skb) = NULL; |
| } |
| return skb; |
| } |
| |
| static void purge_wr_queue(struct s3_conn *c3cn) |
| { |
| struct sk_buff *skb; |
| while ((skb = dequeue_wr(c3cn)) != NULL) |
| free_wr_skb(skb); |
| } |
| |
| static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb, |
| int len, int req_completion) |
| { |
| struct tx_data_wr *req; |
| |
| skb_reset_transport_header(skb); |
| req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req)); |
| req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) | |
| (req_completion ? F_WR_COMPL : 0)); |
| req->wr_lo = htonl(V_WR_TID(c3cn->tid)); |
| req->sndseq = htonl(c3cn->snd_nxt); |
| /* len includes the length of any HW ULP additions */ |
| req->len = htonl(len); |
| req->param = htonl(V_TX_PORT(c3cn->l2t->smt_idx)); |
| /* V_TX_ULP_SUBMODE sets both the mode and submode */ |
| req->flags = htonl(V_TX_ULP_SUBMODE(skb_ulp_mode(skb)) | |
| V_TX_SHOVE((skb_peek(&c3cn->write_queue) ? 0 : 1))); |
| |
| if (!c3cn_flag(c3cn, C3CN_TX_DATA_SENT)) { |
| req->flags |= htonl(V_TX_ACK_PAGES(2) | F_TX_INIT | |
| V_TX_CPU_IDX(c3cn->qset)); |
| /* Sendbuffer is in units of 32KB. */ |
| req->param |= htonl(V_TX_SNDBUF(cxgb3_snd_win >> 15)); |
| c3cn_set_flag(c3cn, C3CN_TX_DATA_SENT); |
| } |
| } |
| |
| /** |
| * c3cn_push_tx_frames -- start transmit |
| * @c3cn: the offloaded connection |
| * @req_completion: request wr_ack or not |
| * |
| * Prepends TX_DATA_WR or CPL_CLOSE_CON_REQ headers to buffers waiting in a |
| * connection's send queue and sends them on to T3. Must be called with the |
| * connection's lock held. Returns the amount of send buffer space that was |
| * freed as a result of sending queued data to T3. |
| */ |
| static void arp_failure_discard(struct t3cdev *cdev, struct sk_buff *skb) |
| { |
| kfree_skb(skb); |
| } |
| |
| static int c3cn_push_tx_frames(struct s3_conn *c3cn, int req_completion) |
| { |
| int total_size = 0; |
| struct sk_buff *skb; |
| struct t3cdev *cdev; |
| struct cxgb3i_sdev_data *cdata; |
| |
| if (unlikely(c3cn->state == C3CN_STATE_CONNECTING || |
| c3cn->state == C3CN_STATE_CLOSE_WAIT_1 || |
| c3cn->state >= C3CN_STATE_ABORTING)) { |
| c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n", |
| c3cn, c3cn->state); |
| return 0; |
| } |
| |
| cdev = c3cn->cdev; |
| cdata = CXGB3_SDEV_DATA(cdev); |
| |
| while (c3cn->wr_avail |
| && (skb = skb_peek(&c3cn->write_queue)) != NULL) { |
| int len = skb->len; /* length before skb_push */ |
| int frags = skb_shinfo(skb)->nr_frags + (len != skb->data_len); |
| int wrs_needed = skb_wrs[frags]; |
| |
| if (wrs_needed > 1 && len + sizeof(struct tx_data_wr) <= wrlen) |
| wrs_needed = 1; |
| |
| WARN_ON(frags >= SKB_WR_LIST_SIZE || wrs_needed < 1); |
| |
| if (c3cn->wr_avail < wrs_needed) { |
| c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, " |
| "wr %d < %u.\n", |
| c3cn, skb->len, skb->data_len, frags, |
| wrs_needed, c3cn->wr_avail); |
| break; |
| } |
| |
| __skb_unlink(skb, &c3cn->write_queue); |
| skb->priority = CPL_PRIORITY_DATA; |
| skb->csum = wrs_needed; /* remember this until the WR_ACK */ |
| c3cn->wr_avail -= wrs_needed; |
| c3cn->wr_unacked += wrs_needed; |
| enqueue_wr(c3cn, skb); |
| |
| c3cn_tx_debug("c3cn 0x%p, enqueue, skb len %u/%u, frag %u, " |
| "wr %d, left %u, unack %u.\n", |
| c3cn, skb->len, skb->data_len, frags, |
| wrs_needed, c3cn->wr_avail, c3cn->wr_unacked); |
| |
| |
| if (likely(skb_flags(skb) & C3CB_FLAG_NEED_HDR)) { |
| if ((req_completion && |
| c3cn->wr_unacked == wrs_needed) || |
| (skb_flags(skb) & C3CB_FLAG_COMPL) || |
| c3cn->wr_unacked >= c3cn->wr_max / 2) { |
| req_completion = 1; |
| c3cn->wr_unacked = 0; |
| } |
| len += ulp_extra_len(skb); |
| make_tx_data_wr(c3cn, skb, len, req_completion); |
| c3cn->snd_nxt += len; |
| skb_flags(skb) &= ~C3CB_FLAG_NEED_HDR; |
| } |
| |
| total_size += skb->truesize; |
| set_arp_failure_handler(skb, arp_failure_discard); |
| l2t_send(cdev, skb, c3cn->l2t); |
| } |
| return total_size; |
| } |
| |
| /* |
| * process_cpl_msg: -> host |
| * Top-level CPL message processing used by most CPL messages that |
| * pertain to connections. |
| */ |
| static inline void process_cpl_msg(void (*fn)(struct s3_conn *, |
| struct sk_buff *), |
| struct s3_conn *c3cn, |
| struct sk_buff *skb) |
| { |
| spin_lock_bh(&c3cn->lock); |
| fn(c3cn, skb); |
| spin_unlock_bh(&c3cn->lock); |
| } |
| |
| /* |
| * process_cpl_msg_ref: -> host |
| * Similar to process_cpl_msg() but takes an extra connection reference around |
| * the call to the handler. Should be used if the handler may drop a |
| * connection reference. |
| */ |
| static inline void process_cpl_msg_ref(void (*fn) (struct s3_conn *, |
| struct sk_buff *), |
| struct s3_conn *c3cn, |
| struct sk_buff *skb) |
| { |
| c3cn_hold(c3cn); |
| process_cpl_msg(fn, c3cn, skb); |
| c3cn_put(c3cn); |
| } |
| |
| /* |
| * Process a CPL_ACT_ESTABLISH message: -> host |
| * Updates connection state from an active establish CPL message. Runs with |
| * the connection lock held. |
| */ |
| |
| static inline void s3_free_atid(struct t3cdev *cdev, unsigned int tid) |
| { |
| struct s3_conn *c3cn = cxgb3_free_atid(cdev, tid); |
| if (c3cn) |
| c3cn_put(c3cn); |
| } |
| |
| static void c3cn_established(struct s3_conn *c3cn, u32 snd_isn, |
| unsigned int opt) |
| { |
| c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); |
| |
| c3cn->write_seq = c3cn->snd_nxt = c3cn->snd_una = snd_isn; |
| |
| /* |
| * Causes the first RX_DATA_ACK to supply any Rx credits we couldn't |
| * pass through opt0. |
| */ |
| if (cxgb3_rcv_win > (M_RCV_BUFSIZ << 10)) |
| c3cn->rcv_wup -= cxgb3_rcv_win - (M_RCV_BUFSIZ << 10); |
| |
| dst_confirm(c3cn->dst_cache); |
| |
| smp_mb(); |
| |
| c3cn_set_state(c3cn, C3CN_STATE_ESTABLISHED); |
| } |
| |
| static void process_act_establish(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| struct cpl_act_establish *req = cplhdr(skb); |
| u32 rcv_isn = ntohl(req->rcv_isn); /* real RCV_ISN + 1 */ |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| if (unlikely(c3cn->state != C3CN_STATE_CONNECTING)) |
| cxgb3i_log_error("TID %u expected SYN_SENT, got EST., s %u\n", |
| c3cn->tid, c3cn->state); |
| |
| c3cn->copied_seq = c3cn->rcv_wup = c3cn->rcv_nxt = rcv_isn; |
| c3cn_established(c3cn, ntohl(req->snd_isn), ntohs(req->tcp_opt)); |
| |
| __kfree_skb(skb); |
| |
| if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED))) |
| /* upper layer has requested closing */ |
| send_abort_req(c3cn); |
| else { |
| if (skb_queue_len(&c3cn->write_queue)) |
| c3cn_push_tx_frames(c3cn, 1); |
| cxgb3i_conn_tx_open(c3cn); |
| } |
| } |
| |
| static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb, |
| void *ctx) |
| { |
| struct cpl_act_establish *req = cplhdr(skb); |
| unsigned int tid = GET_TID(req); |
| unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); |
| struct s3_conn *c3cn = ctx; |
| struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(cdev); |
| |
| c3cn_conn_debug("rcv, tid 0x%x, c3cn 0x%p, s %u, f 0x%lx.\n", |
| tid, c3cn, c3cn->state, c3cn->flags); |
| |
| c3cn->tid = tid; |
| c3cn_hold(c3cn); |
| cxgb3_insert_tid(cdata->cdev, cdata->client, c3cn, tid); |
| s3_free_atid(cdev, atid); |
| |
| c3cn->qset = G_QNUM(ntohl(skb->csum)); |
| |
| process_cpl_msg(process_act_establish, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * Process a CPL_ACT_OPEN_RPL message: -> host |
| * Handle active open failures. |
| */ |
| static int act_open_rpl_status_to_errno(int status) |
| { |
| switch (status) { |
| case CPL_ERR_CONN_RESET: |
| return ECONNREFUSED; |
| case CPL_ERR_ARP_MISS: |
| return EHOSTUNREACH; |
| case CPL_ERR_CONN_TIMEDOUT: |
| return ETIMEDOUT; |
| case CPL_ERR_TCAM_FULL: |
| return ENOMEM; |
| case CPL_ERR_CONN_EXIST: |
| cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n"); |
| return EADDRINUSE; |
| default: |
| return EIO; |
| } |
| } |
| |
| static void act_open_retry_timer(unsigned long data) |
| { |
| struct sk_buff *skb; |
| struct s3_conn *c3cn = (struct s3_conn *)data; |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); |
| |
| spin_lock_bh(&c3cn->lock); |
| skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC); |
| if (!skb) |
| fail_act_open(c3cn, ENOMEM); |
| else { |
| skb->sk = (struct sock *)c3cn; |
| set_arp_failure_handler(skb, act_open_req_arp_failure); |
| make_act_open_req(c3cn, skb, c3cn->tid, c3cn->l2t); |
| l2t_send(c3cn->cdev, skb, c3cn->l2t); |
| } |
| spin_unlock_bh(&c3cn->lock); |
| c3cn_put(c3cn); |
| } |
| |
| static void process_act_open_rpl(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| struct cpl_act_open_rpl *rpl = cplhdr(skb); |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| if (rpl->status == CPL_ERR_CONN_EXIST && |
| c3cn->retry_timer.function != act_open_retry_timer) { |
| c3cn->retry_timer.function = act_open_retry_timer; |
| if (!mod_timer(&c3cn->retry_timer, jiffies + HZ / 2)) |
| c3cn_hold(c3cn); |
| } else |
| fail_act_open(c3cn, act_open_rpl_status_to_errno(rpl->status)); |
| __kfree_skb(skb); |
| } |
| |
| static int do_act_open_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) |
| { |
| struct s3_conn *c3cn = ctx; |
| struct cpl_act_open_rpl *rpl = cplhdr(skb); |
| |
| c3cn_conn_debug("rcv, status 0x%x, c3cn 0x%p, s %u, f 0x%lx.\n", |
| rpl->status, c3cn, c3cn->state, c3cn->flags); |
| |
| if (rpl->status != CPL_ERR_TCAM_FULL && |
| rpl->status != CPL_ERR_CONN_EXIST && |
| rpl->status != CPL_ERR_ARP_MISS) |
| cxgb3_queue_tid_release(cdev, GET_TID(rpl)); |
| |
| process_cpl_msg_ref(process_act_open_rpl, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * Process PEER_CLOSE CPL messages: -> host |
| * Handle peer FIN. |
| */ |
| static void process_peer_close(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) |
| goto out; |
| |
| switch (c3cn->state) { |
| case C3CN_STATE_ESTABLISHED: |
| c3cn_set_state(c3cn, C3CN_STATE_PASSIVE_CLOSE); |
| break; |
| case C3CN_STATE_ACTIVE_CLOSE: |
| c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_2); |
| break; |
| case C3CN_STATE_CLOSE_WAIT_1: |
| c3cn_closed(c3cn); |
| break; |
| case C3CN_STATE_ABORTING: |
| break; |
| default: |
| cxgb3i_log_error("%s: peer close, TID %u in bad state %u\n", |
| c3cn->cdev->name, c3cn->tid, c3cn->state); |
| } |
| |
| cxgb3i_conn_closing(c3cn); |
| out: |
| __kfree_skb(skb); |
| } |
| |
| static int do_peer_close(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) |
| { |
| struct s3_conn *c3cn = ctx; |
| |
| c3cn_conn_debug("rcv, c3cn 0x%p, s %u, f 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| process_cpl_msg_ref(process_peer_close, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * Process CLOSE_CONN_RPL CPL message: -> host |
| * Process a peer ACK to our FIN. |
| */ |
| static void process_close_con_rpl(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| struct cpl_close_con_rpl *rpl = cplhdr(skb); |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| c3cn->snd_una = ntohl(rpl->snd_nxt) - 1; /* exclude FIN */ |
| |
| if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) |
| goto out; |
| |
| switch (c3cn->state) { |
| case C3CN_STATE_ACTIVE_CLOSE: |
| c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_1); |
| break; |
| case C3CN_STATE_CLOSE_WAIT_1: |
| case C3CN_STATE_CLOSE_WAIT_2: |
| c3cn_closed(c3cn); |
| break; |
| case C3CN_STATE_ABORTING: |
| break; |
| default: |
| cxgb3i_log_error("%s: close_rpl, TID %u in bad state %u\n", |
| c3cn->cdev->name, c3cn->tid, c3cn->state); |
| } |
| |
| out: |
| kfree_skb(skb); |
| } |
| |
| static int do_close_con_rpl(struct t3cdev *cdev, struct sk_buff *skb, |
| void *ctx) |
| { |
| struct s3_conn *c3cn = ctx; |
| |
| c3cn_conn_debug("rcv, c3cn 0x%p, s %u, f 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| process_cpl_msg_ref(process_close_con_rpl, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * Process ABORT_REQ_RSS CPL message: -> host |
| * Process abort requests. If we are waiting for an ABORT_RPL we ignore this |
| * request except that we need to reply to it. |
| */ |
| |
| static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason, |
| int *need_rst) |
| { |
| switch (abort_reason) { |
| case CPL_ERR_BAD_SYN: /* fall through */ |
| case CPL_ERR_CONN_RESET: |
| return c3cn->state > C3CN_STATE_ESTABLISHED ? |
| EPIPE : ECONNRESET; |
| case CPL_ERR_XMIT_TIMEDOUT: |
| case CPL_ERR_PERSIST_TIMEDOUT: |
| case CPL_ERR_FINWAIT2_TIMEDOUT: |
| case CPL_ERR_KEEPALIVE_TIMEDOUT: |
| return ETIMEDOUT; |
| default: |
| return EIO; |
| } |
| } |
| |
| static void process_abort_req(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| int rst_status = CPL_ABORT_NO_RST; |
| const struct cpl_abort_req_rss *req = cplhdr(skb); |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| if (!c3cn_flag(c3cn, C3CN_ABORT_REQ_RCVD)) { |
| c3cn_set_flag(c3cn, C3CN_ABORT_REQ_RCVD); |
| c3cn_set_state(c3cn, C3CN_STATE_ABORTING); |
| __kfree_skb(skb); |
| return; |
| } |
| |
| c3cn_clear_flag(c3cn, C3CN_ABORT_REQ_RCVD); |
| send_abort_rpl(c3cn, rst_status); |
| |
| if (!c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) { |
| c3cn->err = |
| abort_status_to_errno(c3cn, req->status, &rst_status); |
| c3cn_closed(c3cn); |
| } |
| } |
| |
| static int do_abort_req(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) |
| { |
| const struct cpl_abort_req_rss *req = cplhdr(skb); |
| struct s3_conn *c3cn = ctx; |
| |
| c3cn_conn_debug("rcv, c3cn 0x%p, s 0x%x, f 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| if (req->status == CPL_ERR_RTX_NEG_ADVICE || |
| req->status == CPL_ERR_PERSIST_NEG_ADVICE) { |
| __kfree_skb(skb); |
| return 0; |
| } |
| |
| process_cpl_msg_ref(process_abort_req, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * Process ABORT_RPL_RSS CPL message: -> host |
| * Process abort replies. We only process these messages if we anticipate |
| * them as the coordination between SW and HW in this area is somewhat lacking |
| * and sometimes we get ABORT_RPLs after we are done with the connection that |
| * originated the ABORT_REQ. |
| */ |
| static void process_abort_rpl(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) { |
| if (!c3cn_flag(c3cn, C3CN_ABORT_RPL_RCVD)) |
| c3cn_set_flag(c3cn, C3CN_ABORT_RPL_RCVD); |
| else { |
| c3cn_clear_flag(c3cn, C3CN_ABORT_RPL_RCVD); |
| c3cn_clear_flag(c3cn, C3CN_ABORT_RPL_PENDING); |
| if (c3cn_flag(c3cn, C3CN_ABORT_REQ_RCVD)) |
| cxgb3i_log_error("%s tid %u, ABORT_RPL_RSS\n", |
| c3cn->cdev->name, c3cn->tid); |
| c3cn_closed(c3cn); |
| } |
| } |
| __kfree_skb(skb); |
| } |
| |
| static int do_abort_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) |
| { |
| struct cpl_abort_rpl_rss *rpl = cplhdr(skb); |
| struct s3_conn *c3cn = ctx; |
| |
| c3cn_conn_debug("rcv, status 0x%x, c3cn 0x%p, s %u, 0x%lx.\n", |
| rpl->status, c3cn, c3cn ? c3cn->state : 0, |
| c3cn ? c3cn->flags : 0UL); |
| |
| /* |
| * Ignore replies to post-close aborts indicating that the abort was |
| * requested too late. These connections are terminated when we get |
| * PEER_CLOSE or CLOSE_CON_RPL and by the time the abort_rpl_rss |
| * arrives the TID is either no longer used or it has been recycled. |
| */ |
| if (rpl->status == CPL_ERR_ABORT_FAILED) |
| goto discard; |
| |
| /* |
| * Sometimes we've already closed the connection, e.g., a post-close |
| * abort races with ABORT_REQ_RSS, the latter frees the connection |
| * expecting the ABORT_REQ will fail with CPL_ERR_ABORT_FAILED, |
| * but FW turns the ABORT_REQ into a regular one and so we get |
| * ABORT_RPL_RSS with status 0 and no connection. |
| */ |
| if (!c3cn) |
| goto discard; |
| |
| process_cpl_msg_ref(process_abort_rpl, c3cn, skb); |
| return 0; |
| |
| discard: |
| __kfree_skb(skb); |
| return 0; |
| } |
| |
| /* |
| * Process RX_ISCSI_HDR CPL message: -> host |
| * Handle received PDUs, the payload could be DDP'ed. If not, the payload |
| * follow after the bhs. |
| */ |
| static void process_rx_iscsi_hdr(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| struct cpl_iscsi_hdr *hdr_cpl = cplhdr(skb); |
| struct cpl_iscsi_hdr_norss data_cpl; |
| struct cpl_rx_data_ddp_norss ddp_cpl; |
| unsigned int hdr_len, data_len, status; |
| unsigned int len; |
| int err; |
| |
| if (unlikely(c3cn->state >= C3CN_STATE_PASSIVE_CLOSE)) { |
| if (c3cn->state != C3CN_STATE_ABORTING) |
| send_abort_req(c3cn); |
| __kfree_skb(skb); |
| return; |
| } |
| |
| skb_tcp_seq(skb) = ntohl(hdr_cpl->seq); |
| skb_flags(skb) = 0; |
| |
| skb_reset_transport_header(skb); |
| __skb_pull(skb, sizeof(struct cpl_iscsi_hdr)); |
| |
| len = hdr_len = ntohs(hdr_cpl->len); |
| /* msg coalesce is off or not enough data received */ |
| if (skb->len <= hdr_len) { |
| cxgb3i_log_error("%s: TID %u, ISCSI_HDR, skb len %u < %u.\n", |
| c3cn->cdev->name, c3cn->tid, |
| skb->len, hdr_len); |
| goto abort_conn; |
| } |
| |
| err = skb_copy_bits(skb, skb->len - sizeof(ddp_cpl), &ddp_cpl, |
| sizeof(ddp_cpl)); |
| if (err < 0) |
| goto abort_conn; |
| |
| skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY; |
| skb_rx_pdulen(skb) = ntohs(ddp_cpl.len); |
| skb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc); |
| status = ntohl(ddp_cpl.ddp_status); |
| |
| c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n", |
| skb, skb->len, skb_rx_pdulen(skb), status); |
| |
| if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT)) |
| skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR; |
| if (status & (1 << RX_DDP_STATUS_DCRC_SHIFT)) |
| skb_ulp_mode(skb) |= ULP2_FLAG_DCRC_ERROR; |
| if (status & (1 << RX_DDP_STATUS_PAD_SHIFT)) |
| skb_ulp_mode(skb) |= ULP2_FLAG_PAD_ERROR; |
| |
| if (skb->len > (hdr_len + sizeof(ddp_cpl))) { |
| err = skb_copy_bits(skb, hdr_len, &data_cpl, sizeof(data_cpl)); |
| if (err < 0) |
| goto abort_conn; |
| data_len = ntohs(data_cpl.len); |
| len += sizeof(data_cpl) + data_len; |
| } else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT)) |
| skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED; |
| |
| c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_rx_pdulen(skb); |
| __pskb_trim(skb, len); |
| __skb_queue_tail(&c3cn->receive_queue, skb); |
| cxgb3i_conn_pdu_ready(c3cn); |
| |
| return; |
| |
| abort_conn: |
| send_abort_req(c3cn); |
| __kfree_skb(skb); |
| } |
| |
| static int do_iscsi_hdr(struct t3cdev *t3dev, struct sk_buff *skb, void *ctx) |
| { |
| struct s3_conn *c3cn = ctx; |
| |
| process_cpl_msg(process_rx_iscsi_hdr, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * Process TX_DATA_ACK CPL messages: -> host |
| * Process an acknowledgment of WR completion. Advance snd_una and send the |
| * next batch of work requests from the write queue. |
| */ |
| static void check_wr_invariants(struct s3_conn *c3cn) |
| { |
| int pending = count_pending_wrs(c3cn); |
| |
| if (unlikely(c3cn->wr_avail + pending != c3cn->wr_max)) |
| cxgb3i_log_error("TID %u: credit imbalance: avail %u, " |
| "pending %u, total should be %u\n", |
| c3cn->tid, c3cn->wr_avail, pending, |
| c3cn->wr_max); |
| } |
| |
| static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| struct cpl_wr_ack *hdr = cplhdr(skb); |
| unsigned int credits = ntohs(hdr->credits); |
| u32 snd_una = ntohl(hdr->snd_una); |
| |
| c3cn_tx_debug("%u WR credits, avail %u, unack %u, TID %u, state %u.\n", |
| credits, c3cn->wr_avail, c3cn->wr_unacked, |
| c3cn->tid, c3cn->state); |
| |
| c3cn->wr_avail += credits; |
| if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail) |
| c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail; |
| |
| while (credits) { |
| struct sk_buff *p = peek_wr(c3cn); |
| |
| if (unlikely(!p)) { |
| cxgb3i_log_error("%u WR_ACK credits for TID %u with " |
| "nothing pending, state %u\n", |
| credits, c3cn->tid, c3cn->state); |
| break; |
| } |
| if (unlikely(credits < p->csum)) { |
| struct tx_data_wr *w = cplhdr(p); |
| cxgb3i_log_error("TID %u got %u WR credits need %u, " |
| "len %u, main body %u, frags %u, " |
| "seq # %u, ACK una %u, ACK nxt %u, " |
| "WR_AVAIL %u, WRs pending %u\n", |
| c3cn->tid, credits, p->csum, p->len, |
| p->len - p->data_len, |
| skb_shinfo(p)->nr_frags, |
| ntohl(w->sndseq), snd_una, |
| ntohl(hdr->snd_nxt), c3cn->wr_avail, |
| count_pending_wrs(c3cn) - credits); |
| p->csum -= credits; |
| break; |
| } else { |
| dequeue_wr(c3cn); |
| credits -= p->csum; |
| free_wr_skb(p); |
| } |
| } |
| |
| check_wr_invariants(c3cn); |
| |
| if (unlikely(before(snd_una, c3cn->snd_una))) { |
| cxgb3i_log_error("TID %u, unexpected sequence # %u in WR_ACK " |
| "snd_una %u\n", |
| c3cn->tid, snd_una, c3cn->snd_una); |
| goto out_free; |
| } |
| |
| if (c3cn->snd_una != snd_una) { |
| c3cn->snd_una = snd_una; |
| dst_confirm(c3cn->dst_cache); |
| } |
| |
| if (skb_queue_len(&c3cn->write_queue)) { |
| if (c3cn_push_tx_frames(c3cn, 0)) |
| cxgb3i_conn_tx_open(c3cn); |
| } else |
| cxgb3i_conn_tx_open(c3cn); |
| out_free: |
| __kfree_skb(skb); |
| } |
| |
| static int do_wr_ack(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) |
| { |
| struct s3_conn *c3cn = ctx; |
| |
| process_cpl_msg(process_wr_ack, c3cn, skb); |
| return 0; |
| } |
| |
| /* |
| * for each connection, pre-allocate skbs needed for close/abort requests. So |
| * that we can service the request right away. |
| */ |
| static void c3cn_free_cpl_skbs(struct s3_conn *c3cn) |
| { |
| if (c3cn->cpl_close) |
| kfree_skb(c3cn->cpl_close); |
| if (c3cn->cpl_abort_req) |
| kfree_skb(c3cn->cpl_abort_req); |
| if (c3cn->cpl_abort_rpl) |
| kfree_skb(c3cn->cpl_abort_rpl); |
| } |
| |
| static int c3cn_alloc_cpl_skbs(struct s3_conn *c3cn) |
| { |
| c3cn->cpl_close = alloc_skb(sizeof(struct cpl_close_con_req), |
| GFP_KERNEL); |
| if (!c3cn->cpl_close) |
| return -ENOMEM; |
| skb_put(c3cn->cpl_close, sizeof(struct cpl_close_con_req)); |
| |
| c3cn->cpl_abort_req = alloc_skb(sizeof(struct cpl_abort_req), |
| GFP_KERNEL); |
| if (!c3cn->cpl_abort_req) |
| goto free_cpl_skbs; |
| skb_put(c3cn->cpl_abort_req, sizeof(struct cpl_abort_req)); |
| |
| c3cn->cpl_abort_rpl = alloc_skb(sizeof(struct cpl_abort_rpl), |
| GFP_KERNEL); |
| if (!c3cn->cpl_abort_rpl) |
| goto free_cpl_skbs; |
| skb_put(c3cn->cpl_abort_rpl, sizeof(struct cpl_abort_rpl)); |
| |
| return 0; |
| |
| free_cpl_skbs: |
| c3cn_free_cpl_skbs(c3cn); |
| return -ENOMEM; |
| } |
| |
| /** |
| * c3cn_release_offload_resources - release offload resource |
| * @c3cn: the offloaded iscsi tcp connection. |
| * Release resources held by an offload connection (TID, L2T entry, etc.) |
| */ |
| static void c3cn_release_offload_resources(struct s3_conn *c3cn) |
| { |
| struct t3cdev *cdev = c3cn->cdev; |
| unsigned int tid = c3cn->tid; |
| |
| c3cn->qset = 0; |
| c3cn_free_cpl_skbs(c3cn); |
| |
| if (c3cn->wr_avail != c3cn->wr_max) { |
| purge_wr_queue(c3cn); |
| reset_wr_list(c3cn); |
| } |
| |
| if (cdev) { |
| if (c3cn->l2t) { |
| l2t_release(L2DATA(cdev), c3cn->l2t); |
| c3cn->l2t = NULL; |
| } |
| if (c3cn->state == C3CN_STATE_CONNECTING) |
| /* we have ATID */ |
| s3_free_atid(cdev, tid); |
| else { |
| /* we have TID */ |
| cxgb3_remove_tid(cdev, (void *)c3cn, tid); |
| c3cn_put(c3cn); |
| } |
| } |
| |
| c3cn->dst_cache = NULL; |
| c3cn->cdev = NULL; |
| } |
| |
| /** |
| * cxgb3i_c3cn_create - allocate and initialize an s3_conn structure |
| * returns the s3_conn structure allocated. |
| */ |
| struct s3_conn *cxgb3i_c3cn_create(void) |
| { |
| struct s3_conn *c3cn; |
| |
| c3cn = kzalloc(sizeof(*c3cn), GFP_KERNEL); |
| if (!c3cn) |
| return NULL; |
| |
| /* pre-allocate close/abort cpl, so we don't need to wait for memory |
| when close/abort is requested. */ |
| if (c3cn_alloc_cpl_skbs(c3cn) < 0) |
| goto free_c3cn; |
| |
| c3cn_conn_debug("alloc c3cn 0x%p.\n", c3cn); |
| |
| c3cn->flags = 0; |
| spin_lock_init(&c3cn->lock); |
| atomic_set(&c3cn->refcnt, 1); |
| skb_queue_head_init(&c3cn->receive_queue); |
| skb_queue_head_init(&c3cn->write_queue); |
| setup_timer(&c3cn->retry_timer, NULL, (unsigned long)c3cn); |
| rwlock_init(&c3cn->callback_lock); |
| |
| return c3cn; |
| |
| free_c3cn: |
| kfree(c3cn); |
| return NULL; |
| } |
| |
| static void c3cn_active_close(struct s3_conn *c3cn) |
| { |
| int data_lost; |
| int close_req = 0; |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| |
| dst_confirm(c3cn->dst_cache); |
| |
| c3cn_hold(c3cn); |
| spin_lock_bh(&c3cn->lock); |
| |
| data_lost = skb_queue_len(&c3cn->receive_queue); |
| __skb_queue_purge(&c3cn->receive_queue); |
| |
| switch (c3cn->state) { |
| case C3CN_STATE_CLOSED: |
| case C3CN_STATE_ACTIVE_CLOSE: |
| case C3CN_STATE_CLOSE_WAIT_1: |
| case C3CN_STATE_CLOSE_WAIT_2: |
| case C3CN_STATE_ABORTING: |
| /* nothing need to be done */ |
| break; |
| case C3CN_STATE_CONNECTING: |
| /* defer until cpl_act_open_rpl or cpl_act_establish */ |
| c3cn_set_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED); |
| break; |
| case C3CN_STATE_ESTABLISHED: |
| close_req = 1; |
| c3cn_set_state(c3cn, C3CN_STATE_ACTIVE_CLOSE); |
| break; |
| case C3CN_STATE_PASSIVE_CLOSE: |
| close_req = 1; |
| c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_2); |
| break; |
| } |
| |
| if (close_req) { |
| if (data_lost) |
| /* Unread data was tossed, zap the connection. */ |
| send_abort_req(c3cn); |
| else |
| send_close_req(c3cn); |
| } |
| |
| spin_unlock_bh(&c3cn->lock); |
| c3cn_put(c3cn); |
| } |
| |
| /** |
| * cxgb3i_c3cn_release - close and release an iscsi tcp connection and any |
| * resource held |
| * @c3cn: the iscsi tcp connection |
| */ |
| void cxgb3i_c3cn_release(struct s3_conn *c3cn) |
| { |
| c3cn_conn_debug("c3cn 0x%p, s %u, f 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| if (unlikely(c3cn->state == C3CN_STATE_CONNECTING)) |
| c3cn_set_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED); |
| else if (likely(c3cn->state != C3CN_STATE_CLOSED)) |
| c3cn_active_close(c3cn); |
| c3cn_put(c3cn); |
| } |
| |
| static int is_cxgb3_dev(struct net_device *dev) |
| { |
| struct cxgb3i_sdev_data *cdata; |
| |
| write_lock(&cdata_rwlock); |
| list_for_each_entry(cdata, &cdata_list, list) { |
| struct adap_ports *ports = &cdata->ports; |
| int i; |
| |
| for (i = 0; i < ports->nports; i++) |
| if (dev == ports->lldevs[i]) { |
| write_unlock(&cdata_rwlock); |
| return 1; |
| } |
| } |
| write_unlock(&cdata_rwlock); |
| return 0; |
| } |
| |
| /** |
| * cxgb3_egress_dev - return the cxgb3 egress device |
| * @root_dev: the root device anchoring the search |
| * @c3cn: the connection used to determine egress port in bonding mode |
| * @context: in bonding mode, indicates a connection set up or failover |
| * |
| * Return egress device or NULL if the egress device isn't one of our ports. |
| */ |
| static struct net_device *cxgb3_egress_dev(struct net_device *root_dev, |
| struct s3_conn *c3cn, |
| int context) |
| { |
| while (root_dev) { |
| if (root_dev->priv_flags & IFF_802_1Q_VLAN) |
| root_dev = vlan_dev_real_dev(root_dev); |
| else if (is_cxgb3_dev(root_dev)) |
| return root_dev; |
| else |
| return NULL; |
| } |
| return NULL; |
| } |
| |
| static struct rtable *find_route(__be32 saddr, __be32 daddr, |
| __be16 sport, __be16 dport) |
| { |
| struct rtable *rt; |
| struct flowi fl = { |
| .oif = 0, |
| .nl_u = { |
| .ip4_u = { |
| .daddr = daddr, |
| .saddr = saddr, |
| .tos = 0 } }, |
| .proto = IPPROTO_TCP, |
| .uli_u = { |
| .ports = { |
| .sport = sport, |
| .dport = dport } } }; |
| |
| if (ip_route_output_flow(&init_net, &rt, &fl, NULL, 0)) |
| return NULL; |
| return rt; |
| } |
| |
| /* |
| * Assign offload parameters to some connection fields. |
| */ |
| static void init_offload_conn(struct s3_conn *c3cn, |
| struct t3cdev *cdev, |
| struct dst_entry *dst) |
| { |
| BUG_ON(c3cn->cdev != cdev); |
| c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs - 1; |
| c3cn->wr_unacked = 0; |
| c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst)); |
| |
| reset_wr_list(c3cn); |
| } |
| |
| static int initiate_act_open(struct s3_conn *c3cn, struct net_device *dev) |
| { |
| struct cxgb3i_sdev_data *cdata = NDEV2CDATA(dev); |
| struct t3cdev *cdev = cdata->cdev; |
| struct dst_entry *dst = c3cn->dst_cache; |
| struct sk_buff *skb; |
| |
| c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", |
| c3cn, c3cn->state, c3cn->flags); |
| /* |
| * Initialize connection data. Note that the flags and ULP mode are |
| * initialized higher up ... |
| */ |
| c3cn->dev = dev; |
| c3cn->cdev = cdev; |
| c3cn->tid = cxgb3_alloc_atid(cdev, cdata->client, c3cn); |
| if (c3cn->tid < 0) |
| goto out_err; |
| |
| c3cn->qset = 0; |
| c3cn->l2t = t3_l2t_get(cdev, dst->neighbour, dev); |
| if (!c3cn->l2t) |
| goto free_tid; |
| |
| skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_KERNEL); |
| if (!skb) |
| goto free_l2t; |
| |
| skb->sk = (struct sock *)c3cn; |
| set_arp_failure_handler(skb, act_open_req_arp_failure); |
| |
| c3cn_hold(c3cn); |
| |
| init_offload_conn(c3cn, cdev, dst); |
| c3cn->err = 0; |
| |
| make_act_open_req(c3cn, skb, c3cn->tid, c3cn->l2t); |
| l2t_send(cdev, skb, c3cn->l2t); |
| return 0; |
| |
| free_l2t: |
| l2t_release(L2DATA(cdev), c3cn->l2t); |
| free_tid: |
| s3_free_atid(cdev, c3cn->tid); |
| c3cn->tid = 0; |
| out_err: |
| return -1; |
| } |
| |
| |
| /** |
| * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address |
| * @c3cn: the iscsi tcp connection |
| * @usin: destination address |
| * |
| * return 0 if active open request is sent, < 0 otherwise. |
| */ |
| int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin) |
| { |
| struct rtable *rt; |
| struct net_device *dev; |
| struct cxgb3i_sdev_data *cdata; |
| struct t3cdev *cdev; |
| __be32 sipv4; |
| int err; |
| |
| if (usin->sin_family != AF_INET) |
| return -EAFNOSUPPORT; |
| |
| c3cn->daddr.sin_port = usin->sin_port; |
| c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr; |
| |
| rt = find_route(c3cn->saddr.sin_addr.s_addr, |
| c3cn->daddr.sin_addr.s_addr, |
| c3cn->saddr.sin_port, |
| c3cn->daddr.sin_port); |
| if (rt == NULL) { |
| c3cn_conn_debug("NO route to 0x%x, port %u.\n", |
| c3cn->daddr.sin_addr.s_addr, |
| ntohs(c3cn->daddr.sin_port)); |
| return -ENETUNREACH; |
| } |
| |
| if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) { |
| c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n", |
| c3cn->daddr.sin_addr.s_addr, |
| ntohs(c3cn->daddr.sin_port)); |
| ip_rt_put(rt); |
| return -ENETUNREACH; |
| } |
| |
| if (!c3cn->saddr.sin_addr.s_addr) |
| c3cn->saddr.sin_addr.s_addr = rt->rt_src; |
| |
| /* now commit destination to connection */ |
| c3cn->dst_cache = &rt->u.dst; |
| |
| /* try to establish an offloaded connection */ |
| dev = cxgb3_egress_dev(c3cn->dst_cache->dev, c3cn, 0); |
| if (dev == NULL) { |
| c3cn_conn_debug("c3cn 0x%p, egress dev NULL.\n", c3cn); |
| return -ENETUNREACH; |
| } |
| cdata = NDEV2CDATA(dev); |
| cdev = cdata->cdev; |
| |
| /* get a source port if one hasn't been provided */ |
| err = c3cn_get_port(c3cn, cdata); |
| if (err) |
| return err; |
| |
| c3cn_conn_debug("c3cn 0x%p get port %u.\n", |
| c3cn, ntohs(c3cn->saddr.sin_port)); |
| |
| sipv4 = cxgb3i_get_private_ipv4addr(dev); |
| if (!sipv4) { |
| c3cn_conn_debug("c3cn 0x%p, iscsi ip not configured.\n", c3cn); |
| sipv4 = c3cn->saddr.sin_addr.s_addr; |
| cxgb3i_set_private_ipv4addr(dev, sipv4); |
| } else |
| c3cn->saddr.sin_addr.s_addr = sipv4; |
| |
| c3cn_conn_debug("c3cn 0x%p, %u.%u.%u.%u,%u-%u.%u.%u.%u,%u SYN_SENT.\n", |
| c3cn, NIPQUAD(c3cn->saddr.sin_addr.s_addr), |
| ntohs(c3cn->saddr.sin_port), |
| NIPQUAD(c3cn->daddr.sin_addr.s_addr), |
| ntohs(c3cn->daddr.sin_port)); |
| |
| c3cn_set_state(c3cn, C3CN_STATE_CONNECTING); |
| if (!initiate_act_open(c3cn, dev)) |
| return 0; |
| |
| /* |
| * If we get here, we don't have an offload connection so simply |
| * return a failure. |
| */ |
| err = -ENOTSUPP; |
| |
| /* |
| * This trashes the connection and releases the local port, |
| * if necessary. |
| */ |
| c3cn_conn_debug("c3cn 0x%p -> CLOSED.\n", c3cn); |
| c3cn_set_state(c3cn, C3CN_STATE_CLOSED); |
| ip_rt_put(rt); |
| c3cn_put_port(c3cn); |
| return err; |
| } |
| |
| /** |
| * cxgb3i_c3cn_rx_credits - ack received tcp data. |
| * @c3cn: iscsi tcp connection |
| * @copied: # of bytes processed |
| * |
| * Called after some received data has been read. It returns RX credits |
| * to the HW for the amount of data processed. |
| */ |
| void cxgb3i_c3cn_rx_credits(struct s3_conn *c3cn, int copied) |
| { |
| struct t3cdev *cdev; |
| int must_send; |
| u32 credits, dack = 0; |
| |
| if (c3cn->state != C3CN_STATE_ESTABLISHED) |
| return; |
| |
| credits = c3cn->copied_seq - c3cn->rcv_wup; |
| if (unlikely(!credits)) |
| return; |
| |
| cdev = c3cn->cdev; |
| |
| if (unlikely(cxgb3_rx_credit_thres == 0)) |
| return; |
| |
| dack = F_RX_DACK_CHANGE | V_RX_DACK_MODE(1); |
| |
| /* |
| * For coalescing to work effectively ensure the receive window has |
| * at least 16KB left. |
| */ |
| must_send = credits + 16384 >= cxgb3_rcv_win; |
| |
| if (must_send || credits >= cxgb3_rx_credit_thres) |
| c3cn->rcv_wup += send_rx_credits(c3cn, credits, dack); |
| } |
| |
| /** |
| * cxgb3i_c3cn_send_pdus - send the skbs containing iscsi pdus |
| * @c3cn: iscsi tcp connection |
| * @skb: skb contains the iscsi pdu |
| * |
| * Add a list of skbs to a connection send queue. The skbs must comply with |
| * the max size limit of the device and have a headroom of at least |
| * TX_HEADER_LEN bytes. |
| * Return # of bytes queued. |
| */ |
| int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb) |
| { |
| struct sk_buff *next; |
| int err, copied = 0; |
| |
| spin_lock_bh(&c3cn->lock); |
| |
| if (c3cn->state != C3CN_STATE_ESTABLISHED) { |
| c3cn_tx_debug("c3cn 0x%p, not in est. state %u.\n", |
| c3cn, c3cn->state); |
| err = -EAGAIN; |
| goto out_err; |
| } |
| |
| if (c3cn->err) { |
| c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err); |
| err = -EPIPE; |
| goto out_err; |
| } |
| |
| if (c3cn->write_seq - c3cn->snd_una >= cxgb3_snd_win) { |
| c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n", |
| c3cn, c3cn->write_seq, c3cn->snd_una, |
| cxgb3_snd_win); |
| err = -ENOBUFS; |
| goto out_err; |
| } |
| |
| while (skb) { |
| int frags = skb_shinfo(skb)->nr_frags + |
| (skb->len != skb->data_len); |
| |
| if (unlikely(skb_headroom(skb) < TX_HEADER_LEN)) { |
| c3cn_tx_debug("c3cn 0x%p, skb head.\n", c3cn); |
| err = -EINVAL; |
| goto out_err; |
| } |
| |
| if (frags >= SKB_WR_LIST_SIZE) { |
| cxgb3i_log_error("c3cn 0x%p, tx frags %d, len %u,%u.\n", |
| c3cn, skb_shinfo(skb)->nr_frags, |
| skb->len, skb->data_len); |
| err = -EINVAL; |
| goto out_err; |
| } |
| |
| next = skb->next; |
| skb->next = NULL; |
| skb_entail(c3cn, skb, C3CB_FLAG_NO_APPEND | C3CB_FLAG_NEED_HDR); |
| copied += skb->len; |
| c3cn->write_seq += skb->len + ulp_extra_len(skb); |
| skb = next; |
| } |
| done: |
| if (likely(skb_queue_len(&c3cn->write_queue))) |
| c3cn_push_tx_frames(c3cn, 1); |
| spin_unlock_bh(&c3cn->lock); |
| return copied; |
| |
| out_err: |
| if (copied == 0 && err == -EPIPE) |
| copied = c3cn->err ? c3cn->err : -EPIPE; |
| else |
| copied = err; |
| goto done; |
| } |
| |
| static void sdev_data_cleanup(struct cxgb3i_sdev_data *cdata) |
| { |
| struct adap_ports *ports = &cdata->ports; |
| struct s3_conn *c3cn; |
| int i; |
| |
| for (i = 0; i < cxgb3_max_connect; i++) { |
| if (cdata->sport_conn[i]) { |
| c3cn = cdata->sport_conn[i]; |
| cdata->sport_conn[i] = NULL; |
| |
| spin_lock_bh(&c3cn->lock); |
| c3cn->cdev = NULL; |
| c3cn_set_flag(c3cn, C3CN_OFFLOAD_DOWN); |
| c3cn_closed(c3cn); |
| spin_unlock_bh(&c3cn->lock); |
| } |
| } |
| |
| for (i = 0; i < ports->nports; i++) |
| NDEV2CDATA(ports->lldevs[i]) = NULL; |
| |
| cxgb3i_free_big_mem(cdata); |
| } |
| |
| void cxgb3i_sdev_cleanup(void) |
| { |
| struct cxgb3i_sdev_data *cdata; |
| |
| write_lock(&cdata_rwlock); |
| list_for_each_entry(cdata, &cdata_list, list) { |
| list_del(&cdata->list); |
| sdev_data_cleanup(cdata); |
| } |
| write_unlock(&cdata_rwlock); |
| } |
| |
| int cxgb3i_sdev_init(cxgb3_cpl_handler_func *cpl_handlers) |
| { |
| cpl_handlers[CPL_ACT_ESTABLISH] = do_act_establish; |
| cpl_handlers[CPL_ACT_OPEN_RPL] = do_act_open_rpl; |
| cpl_handlers[CPL_PEER_CLOSE] = do_peer_close; |
| cpl_handlers[CPL_ABORT_REQ_RSS] = do_abort_req; |
| cpl_handlers[CPL_ABORT_RPL_RSS] = do_abort_rpl; |
| cpl_handlers[CPL_CLOSE_CON_RPL] = do_close_con_rpl; |
| cpl_handlers[CPL_TX_DMA_ACK] = do_wr_ack; |
| cpl_handlers[CPL_ISCSI_HDR] = do_iscsi_hdr; |
| |
| if (cxgb3_max_connect > CXGB3I_MAX_CONN) |
| cxgb3_max_connect = CXGB3I_MAX_CONN; |
| return 0; |
| } |
| |
| /** |
| * cxgb3i_sdev_add - allocate and initialize resources for each adapter found |
| * @cdev: t3cdev adapter |
| * @client: cxgb3 driver client |
| */ |
| void cxgb3i_sdev_add(struct t3cdev *cdev, struct cxgb3_client *client) |
| { |
| struct cxgb3i_sdev_data *cdata; |
| struct ofld_page_info rx_page_info; |
| unsigned int wr_len; |
| int mapsize = cxgb3_max_connect * sizeof(struct s3_conn *); |
| int i; |
| |
| cdata = cxgb3i_alloc_big_mem(sizeof(*cdata) + mapsize, GFP_KERNEL); |
| if (!cdata) { |
| cxgb3i_log_warn("t3dev 0x%p, offload up, OOM %d.\n", |
| cdev, mapsize); |
| return; |
| } |
| |
| if (cdev->ctl(cdev, GET_WR_LEN, &wr_len) < 0 || |
| cdev->ctl(cdev, GET_PORTS, &cdata->ports) < 0 || |
| cdev->ctl(cdev, GET_RX_PAGE_INFO, &rx_page_info) < 0) { |
| cxgb3i_log_warn("t3dev 0x%p, offload up, ioctl failed.\n", |
| cdev); |
| goto free_cdata; |
| } |
| |
| s3_init_wr_tab(wr_len); |
| |
| spin_lock_init(&cdata->lock); |
| INIT_LIST_HEAD(&cdata->list); |
| cdata->cdev = cdev; |
| cdata->client = client; |
| |
| for (i = 0; i < cdata->ports.nports; i++) |
| NDEV2CDATA(cdata->ports.lldevs[i]) = cdata; |
| |
| write_lock(&cdata_rwlock); |
| list_add_tail(&cdata->list, &cdata_list); |
| write_unlock(&cdata_rwlock); |
| |
| cxgb3i_log_info("t3dev 0x%p, offload up, added.\n", cdev); |
| return; |
| |
| free_cdata: |
| cxgb3i_free_big_mem(cdata); |
| } |
| |
| /** |
| * cxgb3i_sdev_remove - free the allocated resources for the adapter |
| * @cdev: t3cdev adapter |
| */ |
| void cxgb3i_sdev_remove(struct t3cdev *cdev) |
| { |
| struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(cdev); |
| |
| cxgb3i_log_info("t3dev 0x%p, offload down, remove.\n", cdev); |
| |
| write_lock(&cdata_rwlock); |
| list_del(&cdata->list); |
| write_unlock(&cdata_rwlock); |
| |
| sdev_data_cleanup(cdata); |
| } |