| # Copyright 2007 Simtec Electronics |
| # |
| # Licensed under GPLv2 |
| |
| config CPU_S3C2440 |
| bool |
| depends on ARCH_S3C2410 |
| select CPU_ARM920T |
| select S3C2410_CLOCK |
| select S3C2410_PM if PM |
| select S3C2410_GPIO |
| select S3C2440_DMA if S3C2410_DMA |
| select CPU_S3C244X |
| select CPU_LLSERIAL_S3C2440 |
| help |
| Support for S3C2440 Samsung Mobile CPU based systems. |
| |
| config CPU_S3C2442 |
| bool |
| depends on ARCH_S3C2410 |
| select CPU_ARM920T |
| select S3C2410_CLOCK |
| select S3C2410_GPIO |
| select S3C2410_PM if PM |
| select CPU_S3C244X |
| select CPU_LLSERIAL_S3C2440 |
| help |
| Support for S3C2442 Samsung Mobile CPU based systems. |
| |
| config CPU_S3C244X |
| bool |
| depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) |
| help |
| Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. |
| |
| |
| |
| config S3C2440_CPUFREQ |
| bool "S3C2440/S3C2442 CPU Frequency scaling support" |
| depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) |
| select S3C2410_CPUFREQ_UTILS |
| default y |
| help |
| CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. |
| |
| config S3C2440_XTAL_12000000 |
| bool |
| help |
| Indicate that the build needs to support 12MHz system |
| crystal. |
| |
| config S3C2440_XTAL_16934400 |
| bool |
| help |
| Indicate that the build needs to support 16.9344MHz system |
| crystal. |
| |
| config S3C2440_PLL_12000000 |
| bool |
| depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 |
| default y if CPU_FREQ_S3C24XX_PLL |
| help |
| PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. |
| |
| config S3C2440_PLL_16934400 |
| bool |
| depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 |
| default y if CPU_FREQ_S3C24XX_PLL |
| help |
| PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. |
| |
| config S3C2440_DMA |
| bool |
| depends on ARCH_S3C2410 && CPU_S3C24405B |
| help |
| Support for S3C2440 specific DMA code5A |
| |
| menu "S3C2440 and S3C2442 Machines" |
| |
| config MACH_ANUBIS |
| bool "Simtec Electronics ANUBIS" |
| select CPU_S3C2440 |
| select S3C24XX_DCLK |
| select PM_SIMTEC if PM |
| select HAVE_PATA_PLATFORM |
| select S3C24XX_GPIO_EXTRA64 |
| select S3C2440_XTAL_12000000 |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Simtec Electronics ANUBIS |
| development system |
| |
| config MACH_NEO1973_GTA02 |
| bool "Openmoko GTA02 / Freerunner phone" |
| select CPU_S3C2442 |
| select MFD_PCF50633 |
| select PCF50633_GPIO |
| select I2C |
| select POWER_SUPPLY |
| select MACH_NEO1973 |
| select S3C2410_PWM |
| help |
| Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone |
| |
| config MACH_OSIRIS |
| bool "Simtec IM2440D20 (OSIRIS) module" |
| select CPU_S3C2440 |
| select S3C24XX_DCLK |
| select PM_SIMTEC if PM |
| select S3C24XX_GPIO_EXTRA128 |
| select S3C2440_XTAL_12000000 |
| select S3C2410_IOTIMING if S3C2440_CPUFREQ |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the Simtec IM2440D20 module, also |
| known as the Osiris. |
| |
| config MACH_OSIRIS_DVS |
| tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" |
| depends on MACH_OSIRIS |
| select TPS65010 |
| help |
| Say Y/M here if you want to have dynamic voltage scaling support |
| on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. |
| |
| The DVS driver alters the voltage supplied to the ARM core |
| depending on the frequency it is running at. The driver itself |
| does not do any of the frequency alteration, which is left up |
| to the cpufreq driver. |
| |
| config MACH_RX3715 |
| bool "HP iPAQ rx3715" |
| select CPU_S3C2440 |
| select S3C2440_XTAL_16934400 |
| select PM_H1940 if PM |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the HP iPAQ rx3715. |
| |
| config ARCH_S3C2440 |
| bool "SMDK2440" |
| select CPU_S3C2440 |
| select S3C2440_XTAL_16934400 |
| select MACH_SMDK |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the SMDK2440. |
| |
| config MACH_NEXCODER_2440 |
| bool "NexVision NEXCODER 2440 Light Board" |
| select CPU_S3C2440 |
| select S3C2440_XTAL_12000000 |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board |
| |
| config SMDK2440_CPU2440 |
| bool "SMDK2440 with S3C2440 CPU module" |
| default y if ARCH_S3C2440 |
| select S3C2440_XTAL_16934400 |
| select CPU_S3C2440 |
| |
| config SMDK2440_CPU2442 |
| bool "SMDM2440 with S3C2442 CPU module" |
| select CPU_S3C2442 |
| |
| config MACH_AT2440EVB |
| bool "Avantech AT2440EVB development board" |
| select CPU_S3C2440 |
| select S3C_DEV_USB_HOST |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the AT2440EVB development board |
| |
| config MACH_MINI2440 |
| bool "MINI2440 development board" |
| select CPU_S3C2440 |
| select EEPROM_AT24 |
| select LEDS_TRIGGER_BACKLIGHT |
| select SND_S3C24XX_SOC_S3C24XX_UDA134X |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here to select support for the MINI2440. Is a 10cm x 10cm board |
| available via various sources. It can come with a 3.5" or 7" touch LCD. |
| |
| config MACH_RX1950 |
| bool "HP iPAQ rx1950" |
| select CPU_S3C2442 |
| select S3C24XX_DCLK |
| select PM_H1940 if PM |
| select I2C |
| select S3C2410_PWM |
| select S3C_DEV_NAND |
| select S3C2410_IOTIMING if S3C2440_CPUFREQ |
| select S3C2440_XTAL_16934400 |
| help |
| Say Y here if you're using HP iPAQ rx1950 |
| |
| endmenu |