atheros: add common debug printing
ath9k uses this for now, ath9k_htc is expected to re-use this
as well. We lave ath5k as is, but it certainly can also be
converted later.
The ath9k module parameter and debugfs entry is kept.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index fb635a0..6caef1b 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -309,16 +309,16 @@
sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
min(common->cachelsz, (u16)64));
- DPRINTF(sc->sc_ah, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
- common->cachelsz, sc->rx.bufsize);
+ ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+ common->cachelsz, sc->rx.bufsize);
/* Initialize rx descriptors */
error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
"rx", nbufs, 1);
if (error != 0) {
- DPRINTF(sc->sc_ah, ATH_DBG_FATAL,
- "failed to allocate rx descriptors: %d\n", error);
+ ath_print(common, ATH_DBG_FATAL,
+ "failed to allocate rx descriptors: %d\n", error);
goto err;
}
@@ -337,8 +337,8 @@
bf->bf_buf_addr))) {
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
- DPRINTF(sc->sc_ah, ATH_DBG_FATAL,
- "dma_mapping_error() on RX init\n");
+ ath_print(common, ATH_DBG_FATAL,
+ "dma_mapping_error() on RX init\n");
error = -ENOMEM;
goto err;
}
@@ -543,8 +543,9 @@
if (sc->sc_flags & SC_OP_BEACON_SYNC) {
sc->sc_flags &= ~SC_OP_BEACON_SYNC;
- DPRINTF(sc->sc_ah, ATH_DBG_PS, "Reconfigure Beacon timers based on "
- "timestamp from the AP\n");
+ ath_print(common, ATH_DBG_PS,
+ "Reconfigure Beacon timers based on "
+ "timestamp from the AP\n");
ath_beacon_config(sc, NULL);
}
@@ -556,8 +557,8 @@
* a backup trigger for returning into NETWORK SLEEP state,
* so we are waiting for it as well.
*/
- DPRINTF(sc->sc_ah, ATH_DBG_PS, "Received DTIM beacon indicating "
- "buffered broadcast/multicast frame(s)\n");
+ ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
+ "buffered broadcast/multicast frame(s)\n");
sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
return;
}
@@ -569,13 +570,15 @@
* been delivered.
*/
sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
- DPRINTF(sc->sc_ah, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
+ ath_print(common, ATH_DBG_PS,
+ "PS wait for CAB frames timed out\n");
}
}
static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
hdr = (struct ieee80211_hdr *)skb->data;
@@ -593,14 +596,15 @@
* point.
*/
sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
- DPRINTF(sc->sc_ah, ATH_DBG_PS, "All PS CAB frames received, back to "
- "sleep\n");
+ ath_print(common, ATH_DBG_PS,
+ "All PS CAB frames received, back to sleep\n");
} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
- DPRINTF(sc->sc_ah, ATH_DBG_PS, "Going back to sleep after having "
- "received PS-Poll data (0x%x)\n",
+ ath_print(common, ATH_DBG_PS,
+ "Going back to sleep after having received "
+ "PS-Poll data (0x%x)\n",
sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA |
@@ -816,8 +820,8 @@
bf->bf_buf_addr))) {
dev_kfree_skb_any(requeue_skb);
bf->bf_mpdu = NULL;
- DPRINTF(sc->sc_ah, ATH_DBG_FATAL,
- "dma_mapping_error() on RX\n");
+ ath_print(common, ATH_DBG_FATAL,
+ "dma_mapping_error() on RX\n");
ath_rx_send_to_mac80211(sc, skb, &rx_status);
break;
}