qlge: New Qlogic 10Gb Ethernet Driver.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
new file mode 100644
index 0000000..24fe344
--- /dev/null
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -0,0 +1,150 @@
+#include "qlge.h"
+
+static int ql_read_mbox_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
+{
+ int status;
+ /* wait for reg to come ready */
+ status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
+ if (status)
+ goto exit;
+ /* set up for reg read */
+ ql_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R);
+ /* wait for reg to come ready */
+ status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
+ if (status)
+ goto exit;
+ /* get the data */
+ *data = ql_read32(qdev, PROC_DATA);
+exit:
+ return status;
+}
+
+int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
+{
+ int i, status;
+
+ status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK);
+ if (status)
+ return -EBUSY;
+ for (i = 0; i < mbcp->out_count; i++) {
+ status =
+ ql_read_mbox_reg(qdev, qdev->mailbox_out + i,
+ &mbcp->mbox_out[i]);
+ if (status) {
+ QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n");
+ break;
+ }
+ }
+ ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */
+ return status;
+}
+
+static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
+{
+ mbcp->out_count = 2;
+
+ if (ql_get_mb_sts(qdev, mbcp))
+ goto exit;
+
+ qdev->link_status = mbcp->mbox_out[1];
+ QPRINTK(qdev, DRV, ERR, "Link Up.\n");
+ QPRINTK(qdev, DRV, INFO, "Link Status = 0x%.08x.\n", mbcp->mbox_out[1]);
+ if (!netif_carrier_ok(qdev->ndev)) {
+ QPRINTK(qdev, LINK, INFO, "Link is Up.\n");
+ netif_carrier_on(qdev->ndev);
+ netif_wake_queue(qdev->ndev);
+ }
+exit:
+ /* Clear the MPI firmware status. */
+ ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+}
+
+static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
+{
+ mbcp->out_count = 3;
+
+ if (ql_get_mb_sts(qdev, mbcp)) {
+ QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n");
+ goto exit;
+ }
+
+ if (netif_carrier_ok(qdev->ndev)) {
+ QPRINTK(qdev, LINK, INFO, "Link is Down.\n");
+ netif_carrier_off(qdev->ndev);
+ netif_stop_queue(qdev->ndev);
+ }
+ QPRINTK(qdev, DRV, ERR, "Link Down.\n");
+ QPRINTK(qdev, DRV, ERR, "Link Status = 0x%.08x.\n", mbcp->mbox_out[1]);
+exit:
+ /* Clear the MPI firmware status. */
+ ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+}
+
+static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
+{
+ mbcp->out_count = 2;
+
+ if (ql_get_mb_sts(qdev, mbcp)) {
+ QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n");
+ goto exit;
+ }
+ QPRINTK(qdev, DRV, ERR, "Firmware initialized!\n");
+ QPRINTK(qdev, DRV, ERR, "Firmware status = 0x%.08x.\n",
+ mbcp->mbox_out[0]);
+ QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n",
+ mbcp->mbox_out[1]);
+exit:
+ /* Clear the MPI firmware status. */
+ ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+}
+
+void ql_mpi_work(struct work_struct *work)
+{
+ struct ql_adapter *qdev =
+ container_of(work, struct ql_adapter, mpi_work.work);
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ mbcp->out_count = 1;
+
+ while (ql_read32(qdev, STS) & STS_PI) {
+ if (ql_get_mb_sts(qdev, mbcp)) {
+ QPRINTK(qdev, DRV, ERR,
+ "Could not read MPI, resetting ASIC!\n");
+ ql_queue_asic_error(qdev);
+ }
+
+ switch (mbcp->mbox_out[0]) {
+ case AEN_LINK_UP:
+ ql_link_up(qdev, mbcp);
+ break;
+ case AEN_LINK_DOWN:
+ ql_link_down(qdev, mbcp);
+ break;
+ case AEN_FW_INIT_DONE:
+ ql_init_fw_done(qdev, mbcp);
+ break;
+ case MB_CMD_STS_GOOD:
+ break;
+ case AEN_FW_INIT_FAIL:
+ case AEN_SYS_ERR:
+ case MB_CMD_STS_ERR:
+ ql_queue_fw_error(qdev);
+ default:
+ /* Clear the MPI firmware status. */
+ ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+ break;
+ }
+ }
+ ql_enable_completion_interrupt(qdev, 0);
+}
+
+void ql_mpi_reset_work(struct work_struct *work)
+{
+ struct ql_adapter *qdev =
+ container_of(work, struct ql_adapter, mpi_reset_work.work);
+ QPRINTK(qdev, DRV, ERR,
+ "Enter, qdev = %p..\n", qdev);
+ ql_write32(qdev, CSR, CSR_CMD_SET_RST);
+ msleep(50);
+ ql_write32(qdev, CSR, CSR_CMD_CLR_RST);
+}