libata-sff: clean up BMDMA initialization
When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used. This leads to the following problems.
p1. For BMDMA drivers which don't use traditional BMDMA register,
ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those
drivers either have to inherit from ata_sff_port_ops or clear
->mode_filter explicitly.
p2. non-BMDMA drivers call into BMDMA PRD table allocation. It
doesn't actually allocate PRD table if bmdma_addr is not
initialized but is still confusing.
p3. For BMDMA drivers which don't use traditional BMDMA register, some
methods might not be invoked as expected (e.g. bmdma_stop from
ata_sff_post_internal_cmd()).
p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
worrying libata core might call into one of them.
These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.
This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start. Later patches will fix the
remaining issues.
This patch improves BMDMA initialization such that
* When BMDMA register initialization fails, falls back to PIO instead
of failing. ata_pci_bmdma_init() never fails now.
* When ata_pci_bmdma_init() falls back to PIO, it clears
ap->mwdma_mask and udma_mask instead of depending on
ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter()
unnecessary thus resolving p1.
* ata_port_start() which actually is BMDMA specific is moved to
ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start()
are killed.
* ata_sff_port_start32() is moved and renamed to
ata_bmdma_port_start32().
Drivers which no longer call into PRD table allocation are...
pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
drivers which inherit from ata_sff_port_ops.
pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.
Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3d8b62f..cc49a0d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5506,30 +5506,6 @@
#endif
/**
- * ata_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_port_start(struct ata_port *ap)
-{
- struct device *dev = ap->dev;
-
- ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
- GFP_KERNEL);
- if (!ap->prd)
- return -ENOMEM;
-
- return 0;
-}
-
-/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
*
@@ -6757,7 +6733,6 @@
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_do_set_mode);
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 6400e87..f1c99a3 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -66,8 +66,6 @@
.sff_irq_clear = ata_sff_irq_clear,
.lost_interrupt = ata_sff_lost_interrupt,
-
- .port_start = ata_sff_port_start,
};
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
@@ -2444,50 +2442,6 @@
EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
/**
- * ata_sff_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start(struct ata_port *ap)
-{
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-
-/**
- * ata_sff_port_start32 - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations for
- * devices that are capable of 32bit PIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start32(struct ata_port *ap)
-{
- ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start32);
-
-/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
@@ -2646,21 +2600,12 @@
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_bmdma_init(host);
- if (rc)
- goto err_bmdma;
+ ata_pci_bmdma_init(host);
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
-err_bmdma:
- /* This is necessary because PCI and iomap resources are
- * merged and releasing the top group won't release the
- * acquired resources if some of those have been acquired
- * before entering this function.
- */
- pcim_iounmap_regions(pdev, 0xf);
err_out:
devres_release_group(&pdev->dev, NULL);
return rc;
@@ -2843,12 +2788,12 @@
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
- .mode_filter = ata_bmdma_mode_filter,
-
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
+
+ .port_start = ata_bmdma_port_start,
};
EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
@@ -2856,22 +2801,10 @@
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
- .port_start = ata_sff_port_start32,
+ .port_start = ata_bmdma_port_start32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
-unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
- unsigned long xfer_mask)
-{
- /* Filter out DMA modes if the device has been configured by
- the BIOS as PIO only */
-
- if (adev->link->ap->ioaddr.bmdma_addr == NULL)
- xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return xfer_mask;
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-
/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
@@ -2976,6 +2909,53 @@
}
EXPORT_SYMBOL_GPL(ata_bmdma_status);
+
+/**
+ * ata_bmdma_port_start - Set port up for bmdma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start(struct ata_port *ap)
+{
+ if (ap->mwdma_mask || ap->udma_mask) {
+ ap->prd = dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ,
+ &ap->prd_dma, GFP_KERNEL);
+ if (!ap->prd)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start);
+
+/**
+ * ata_bmdma_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Enables 32bit PIO and allocates space for PRD
+ * table.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ return ata_bmdma_port_start(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
+
#ifdef CONFIG_PCI
/**
@@ -3004,6 +2984,19 @@
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
+{
+ int i;
+
+ dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
+ reason);
+
+ for (i = 0; i < 2; i++) {
+ host->ports[i]->mwdma_mask = 0;
+ host->ports[i]->udma_mask = 0;
+ }
+}
+
/**
* ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
* @host: target ATA host
@@ -3012,33 +3005,40 @@
*
* LOCKING:
* Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
*/
-int ata_pci_bmdma_init(struct ata_host *host)
+void ata_pci_bmdma_init(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
int i, rc;
/* No BAR4 allocation: No DMA */
- if (pci_resource_start(pdev, 4) == 0)
- return 0;
+ if (pci_resource_start(pdev, 4) == 0) {
+ ata_bmdma_nodma(host, "BAR4 is zero");
+ return;
+ }
- /* TODO: If we get no DMA mask we should fall back to PIO */
+ /*
+ * Some controllers require BMDMA region to be initialized
+ * even if DMA is not in use to clear IRQ status via
+ * ->sff_irq_clear method. Try to initialize bmdma_addr
+ * regardless of dma masks.
+ */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
- return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
+ ata_bmdma_nodma(host, "failed to set dma mask");
+ if (!rc) {
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host,
+ "failed to set consistent dma mask");
+ }
/* request and iomap DMA region */
rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
if (rc) {
- dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
- return -ENOMEM;
+ ata_bmdma_nodma(host, "failed to request/iomap BAR4");
+ return;
}
host->iomap = pcim_iomap_table(pdev);
@@ -3057,8 +3057,6 @@
ata_port_desc(ap, "bmdma 0x%llx",
(unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
}
-
- return 0;
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 1ea2be0..1a5a309 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -101,7 +101,7 @@
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
- return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
+ return mask & acpi->mask[adev->devno];
}
/**
@@ -205,7 +205,7 @@
return -ENOMEM;
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
- ret = ata_sff_port_start(ap);
+ ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index dc61b72..f306e10 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -124,7 +124,7 @@
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index c6a946a..0da0dcc 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -202,7 +202,6 @@
.sff_data_xfer = pata_at91_data_xfer_noirq,
.set_piomode = pata_at91_set_piomode,
.cable_detect = ata_cable_40wire,
- .port_start = ATA_OP_NULL,
};
static int __devinit pata_at91_probe(struct platform_device *pdev)
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 3d94c80..6422cfd 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1450,8 +1450,6 @@
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
-
- .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static struct ata_port_info bfin_port_info[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 60ab2d2..e5f289f 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -153,16 +153,12 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct cmd640_reg *timing;
- int ret = ata_sff_port_start(ap);
- if (ret < 0)
- return ret;
-
timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
if (timing == NULL)
return -ENOMEM;
timing->last = -1; /* Force a load */
ap->private_data = timing;
- return ret;
+ return 0;
}
static struct scsi_host_template cmd640_sht = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index af49bfb..8580eb3 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -182,7 +182,7 @@
} else if (adev->class == ATA_DEV_ATAPI)
mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
static int hpt36x_cable_detect(struct ata_port *ap)
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 8839307..98b498b 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -282,7 +282,7 @@
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
@@ -298,7 +298,7 @@
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 832c8cc..ee85a9c 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -335,7 +335,7 @@
.postreset = pata_icside_postreset,
.post_internal_cmd = pata_icside_bmdma_stop,
- .mode_filter = ATA_OP_NULL, /* will be removed soon */
+ .port_start = ATA_OP_NULL, /* don't need PRD table */
};
static void __devinit
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 5cb286f..8d73438 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -739,7 +739,7 @@
struct it821x_dev *itdev;
u8 conf;
- int ret = ata_sff_port_start(ap);
+ int ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 17e4e5d..25df50f 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -720,6 +720,8 @@
if (priv->dma_table_cpu == NULL) {
dev_err(priv->dev, "Unable to allocate DMA command list\n");
ap->ioaddr.bmdma_addr = NULL;
+ ap->mwdma_mask = 0;
+ ap->udma_mask = 0;
}
return 0;
}
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index ca5cad0..09f1f22 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -265,7 +265,7 @@
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
@@ -274,7 +274,7 @@
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 9ac0897..fa1e2f3 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -249,7 +249,7 @@
u8 burst = ioread8(bmdma + 0x1f);
iowrite8(burst | 0x01, bmdma + 0x1f);
}
- return ata_sff_port_start(ap);
+ return ata_bmdma_port_start(ap);
}
/**
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 3f6ebc6..50400fa 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -53,7 +53,6 @@
.sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_unknown,
.set_mode = pata_platform_set_mode,
- .port_start = ATA_OP_NULL,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index d398899..70d549e 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -265,7 +265,7 @@
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
@@ -892,7 +892,7 @@
* scc_port_start - Set port up for dma.
* @ap: Port to initialize
*
- * Allocate space for PRD table using ata_port_start().
+ * Allocate space for PRD table using ata_bmdma_port_start().
* Set PRD table address for PTERADD. (PRD Transfer End Read)
*/
@@ -901,7 +901,7 @@
void __iomem *mmio = ap->ioaddr.bmdma_addr;
int rc;
- rc = ata_port_start(ap);
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 9524d54..43ea389 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -198,7 +198,7 @@
{
if (adev->class == ATA_DEV_ATA)
mask &= ~ATA_MASK_UDMA;
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
@@ -218,7 +218,7 @@
/* Disk, UDMA */
if (adev->class != ATA_DEV_ATA)
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
/* Actually do need to check */
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -227,7 +227,7 @@
if (!strcmp(p, model_num))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 87fb89e..7e3e0a5 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -355,7 +355,7 @@
mask &= ~ ATA_MASK_UDMA;
}
}
- return ata_bmdma_mode_filter(dev, mask);
+ return mask;
}
/**
@@ -424,7 +424,7 @@
struct via_port *vp;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int ret = ata_sff_port_start(ap);
+ int ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index ed18d8b..bb4f838 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -556,11 +556,7 @@
{
struct device *dev = ap->host->dev;
struct adma_port_priv *pp;
- int rc;
- rc = ata_port_start(ap);
- if (rc)
- return rc;
adma_enter_reg_mode(ap);
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index d3e1bab..a36149e 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -682,7 +682,6 @@
{
struct device *dev = ap->host->dev;
struct inic_port_priv *pp;
- int rc;
/* alloc and initialize private data */
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
@@ -691,10 +690,6 @@
ap->private_data = pp;
/* Alloc resources */
- rc = ata_port_start(ap);
- if (rc)
- return rc;
-
pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
&pp->pkt_dma, GFP_KERNEL);
if (!pp->pkt)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a033710..8349186 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -717,8 +717,6 @@
.port_start = mv_port_start,
.port_stop = mv_port_stop,
-
- .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static struct ata_port_operations mv_iie_ops = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 20cc510..a007b20 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1156,7 +1156,8 @@
if (rc)
return rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
@@ -1985,7 +1986,8 @@
struct nv_swncq_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 2c029ea..e80628a 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -333,7 +333,8 @@
struct pdc_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we use the same prd table as bmdma, allocate it */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index febc6e7..da84ea9 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -504,11 +504,7 @@
void __iomem *mmio_base = qs_mmio_base(ap->host);
void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
u64 addr;
- int rc;
- rc = ata_port_start(ap);
- if (rc)
- return rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 7e3a25e..a4e552a 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -302,11 +302,6 @@
{
struct device *dev = ap->host->dev;
struct pdc_port_priv *pp;
- int rc;
-
- rc = ata_port_start(ap);
- if (rc)
- return rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 011e098..d8dac17 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -181,9 +181,7 @@
if (rc)
return rc;
- rc = ata_pci_bmdma_init(host);
- if (rc)
- return rc;
+ ata_pci_bmdma_init(host);
iomap = host->iomap;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d735728..45a547e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1000,7 +1000,6 @@
extern int ata_xfer_mode2shift(unsigned long xfer_mode);
extern const char *ata_mode_string(unsigned long xfer_mask);
extern unsigned long ata_id_xfermask(const u16 *id);
-extern int ata_port_start(struct ata_port *ap);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
@@ -1616,8 +1615,6 @@
extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
-extern int ata_sff_port_start(struct ata_port *ap);
-extern int ata_sff_port_start32(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
extern int ata_pci_sff_init_host(struct ata_host *host);
@@ -1632,16 +1629,16 @@
struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
-extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
- unsigned long xfer_mask);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
+extern int ata_bmdma_port_start(struct ata_port *ap);
+extern int ata_bmdma_port_start32(struct ata_port *ap);
#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
-extern int ata_pci_bmdma_init(struct ata_host *host);
+extern void ata_pci_bmdma_init(struct ata_host *host);
#endif /* CONFIG_PCI */
/**