ath6kl: move diag commands to hif driver
This is preparation for USB support which will have different diag
commands.
Based on code by Kevin Fang.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 46a9bd6..b633c80 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -845,6 +845,104 @@
return 0;
}
+/* set the window address register (using 4-byte register access ). */
+static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
+{
+ int status;
+ u8 addr_val[4];
+ s32 i;
+
+ /*
+ * Write bytes 1,2,3 of the register to set the upper address bytes,
+ * the LSB is written last to initiate the access cycle
+ */
+
+ for (i = 1; i <= 3; i++) {
+ /*
+ * Fill the buffer with the address byte value we want to
+ * hit 4 times.
+ */
+ memset(addr_val, ((u8 *)&addr)[i], 4);
+
+ /*
+ * Hit each byte of the register address with a 4-byte
+ * write operation to the same address, this is a harmless
+ * operation.
+ */
+ status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val,
+ 4, HIF_WR_SYNC_BYTE_FIX);
+ if (status)
+ break;
+ }
+
+ if (status) {
+ ath6kl_err("%s: failed to write initial bytes of 0x%x "
+ "to window reg: 0x%X\n", __func__,
+ addr, reg_addr);
+ return status;
+ }
+
+ /*
+ * Write the address register again, this time write the whole
+ * 4-byte value. The effect here is that the LSB write causes the
+ * cycle to start, the extra 3 byte write to bytes 1,2,3 has no
+ * effect since we are writing the same values again
+ */
+ status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr),
+ 4, HIF_WR_SYNC_BYTE_INC);
+
+ if (status) {
+ ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n",
+ __func__, addr, reg_addr);
+ return status;
+ }
+
+ return 0;
+}
+
+static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
+{
+ int status;
+
+ /* set window register to start read cycle */
+ status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS,
+ address);
+
+ if (status)
+ return status;
+
+ /* read the data */
+ status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
+ (u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC);
+ if (status) {
+ ath6kl_err("%s: failed to read from window data addr\n",
+ __func__);
+ return status;
+ }
+
+ return status;
+}
+
+static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address,
+ __le32 data)
+{
+ int status;
+ u32 val = (__force u32) data;
+
+ /* set write data */
+ status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
+ (u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC);
+ if (status) {
+ ath6kl_err("%s: failed to write 0x%x to window data addr\n",
+ __func__, data);
+ return status;
+ }
+
+ /* set window register, which starts the write cycle */
+ return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
+ address);
+}
+
static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
{
u32 addr;
@@ -1049,6 +1147,8 @@
.cleanup_scatter = ath6kl_sdio_cleanup_scatter,
.suspend = ath6kl_sdio_suspend,
.resume = ath6kl_sdio_resume,
+ .diag_read32 = ath6kl_sdio_diag_read32,
+ .diag_write32 = ath6kl_sdio_diag_write32,
.bmi_read = ath6kl_sdio_bmi_read,
.bmi_write = ath6kl_sdio_bmi_write,
.power_on = ath6kl_sdio_power_on,