drivers/media/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 7d04a6f..168a8d3 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -388,7 +388,7 @@
}
dev->revision &= 0xf;
- /* remap the memory from virtual to physical adress */
+ /* remap the memory from virtual to physical address */
err = pci_request_region(pci, 0, "saa7146");
if (err < 0)
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index a33eb59..ed3f826 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -681,7 +681,7 @@
drop = 1;
/* else: destination address matches the MAC address of our receiver device */
}
- /* else: promiscious mode; pass everything up the stack */
+ /* else: promiscuous mode; pass everything up the stack */
if (drop) {
#ifdef ULE_DEBUG
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 63a47cd..7374c02 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4344,7 +4344,7 @@
gpio_bits(0x200,0x000);
mdelay(1);
- /* create a new conection */
+ /* create a new connection */
gpio_bits(0x480,0x080);
gpio_bits(0x480,0x480);
mdelay(1);
diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c
index 5c2c402..84b9e4f 100644
--- a/drivers/media/video/indycam.c
+++ b/drivers/media/video/indycam.c
@@ -326,7 +326,7 @@
// initialize
err = indycam_write_block(client, 0, sizeof(initseq), (u8 *)&initseq);
if (err) {
- printk(KERN_ERR "IndyCam initalization failed\n");
+ printk(KERN_ERR "IndyCam initialization failed\n");
err = -EIO;
goto out_detach_client;
}
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index b630c26..58bab65 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -369,7 +369,7 @@
.get_frequency = microtune_get_frequency,
};
-// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
+// Initialization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
static int mt2032_init(struct dvb_frontend *fe)
{
struct microtune_priv *priv = fe->tuner_priv;
diff --git a/drivers/media/video/pvrusb2/pvrusb2.h b/drivers/media/video/pvrusb2/pvrusb2.h
index 074533e..1a9a4ba 100644
--- a/drivers/media/video/pvrusb2/pvrusb2.h
+++ b/drivers/media/video/pvrusb2/pvrusb2.h
@@ -27,7 +27,7 @@
might want to increase this - however the driver operation will not
be impaired if it is too small. Instead additional units just
won't have an ID assigned and it might not be possible to specify
- module paramters for those extra units. */
+ module parameters for those extra units. */
#define PVR_NUM 20
#endif /* __PVRUSB2_H */
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index e0ff811..ca05cd6 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -57,7 +57,7 @@
dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g);
- /* check if the paramters are valid */
+ /* check if the parameters are valid */
if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
return -1;
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index d847273..5e7b795 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -258,7 +258,7 @@
unsigned int p;
/*
- the registers controling gain are 8 bit of which
+ the registers controlling gain are 8 bit of which
we affect only the last 4 bits with our gain.
we know that if saturation is 0, (unsaturated) then
we're grayscale (center axis of the colour cone) so
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index b52b826..df52f8a 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -131,7 +131,7 @@
/* Function prototypes */
static void usbvision_release(struct usb_usbvision *usbvision);
-/* Default initalization of device driver parameters */
+/* Default initialization of device driver parameters */
/* Set the default format for ISOC endpoint */
static int isocMode = ISOC_MODE_COMPRESS;
/* Set the default Debug Mode of the device driver */
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 8ef31ed..a913385 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -566,7 +566,7 @@
}
/* -----------------------------------------------------------------------
- * Client managment code
+ * Client management code
*/
/*
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 6e0ac4c..690281b 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -1270,7 +1270,7 @@
}
/*
- * Scan for a Buz card (actually for the PCI contoler ZR36057),
+ * Scan for a Buz card (actually for the PCI controller ZR36057),
* request the irq and map the io memory
*/
static int __devinit
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index 9f622e0..faae4ec 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -161,7 +161,7 @@
udelay(1);
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
- "%s: timout at wait_end (last status: 0x%02x)\n",
+ "%s: timeout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
break;
}
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index 1ef14fe..7849b65 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -163,7 +163,7 @@
udelay(1);
if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
- "%s: timout at wait_end (last status: 0x%02x)\n",
+ "%s: timeout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
break;
}