| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| model = "Qualcomm MPQ8092"; |
| compatible = "qcom,mpq8092"; |
| interrupt-parent = <&intc>; |
| |
| soc: soc { }; |
| }; |
| |
| /include/ "mpq8092-iommu.dtsi" |
| /include/ "msm-gdsc.dtsi" |
| /include/ "mpq8092-ion.dtsi" |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| intc: interrupt-controller@f9000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xf9000000 0x1000>, |
| <0xf9002000 0x1000>; |
| }; |
| |
| msmgpio: gpio@fd510000 { |
| compatible = "qcom,msm-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0xfd510000 0x4000>; |
| ngpio = <146>; |
| interrupts = <0 208 0>; |
| qcom,direct-connect-irqs = <8>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <1 2 0>, <1 3 0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| timer@f9020000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xf9020000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@f9021000 { |
| frame-number = <0>; |
| interrupts = <0 8 0x4>, |
| <0 7 0x4>; |
| reg = <0xf9021000 0x1000>, |
| <0xf9022000 0x1000>; |
| }; |
| |
| frame@f9023000 { |
| frame-number = <1>; |
| interrupts = <0 9 0x4>; |
| reg = <0xf9023000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9024000 { |
| frame-number = <2>; |
| interrupts = <0 10 0x4>; |
| reg = <0xf9024000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9025000 { |
| frame-number = <3>; |
| interrupts = <0 11 0x4>; |
| reg = <0xf9025000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9026000 { |
| frame-number = <4>; |
| interrupts = <0 12 0x4>; |
| reg = <0xf9026000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9027000 { |
| frame-number = <5>; |
| interrupts = <0 13 0x4>; |
| reg = <0xf9027000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9028000 { |
| frame-number = <6>; |
| interrupts = <0 14 0x4>; |
| reg = <0xf9028000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| serial@f991f000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf991f000 0x1000>; |
| interrupts = <0 109 0>; |
| status = "disabled"; |
| }; |
| |
| serial@f9922000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf9922000 0x1000>; |
| interrupts = <0 112 0>; |
| status = "disabled"; |
| }; |
| |
| serial@f995e000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf995e000 0x1000>; |
| interrupts = <0 114 0>; |
| status = "disabled"; |
| }; |
| |
| qcom,msm-imem@fe805000 { |
| compatible = "qcom,msm-imem"; |
| reg = <0xfe805000 0x1000>; /* Address and size of IMEM */ |
| }; |
| |
| usb@f9a55000 { |
| compatible = "qcom,hsusb-otg"; |
| reg = <0xf9a55000 0x400>; |
| interrupts = <0 134 0>, <0 140 0>; |
| interrupt-names = "core_irq", "async_irq"; |
| |
| HSUSB_VDDCX-supply = <&pma8084_s8>; |
| HSUSB_1p8-supply = <&pma8084_l22>; |
| HSUSB_3p3-supply = <&pma8084_l24>; |
| qcom,vdd-voltage-level = <1050000 1050000>; |
| |
| qcom,hsusb-otg-phy-type = <2>; |
| qcom,hsusb-otg-mode = <1>; |
| qcom,hsusb-otg-otg-control = <1>; |
| qcom,hsusb-otg-disable-reset; |
| |
| qcom,msm_bus,name = "usb_otg"; |
| qcom,msm_bus,num_cases = <3>; |
| qcom,msm_bus,active_only = <0>; |
| qcom,msm_bus,num_paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <87 512 0 0>, |
| <87 512 60000 960000>, |
| <87 512 6000 6000>; |
| }; |
| |
| android_usb@fe8050c8 { |
| compatible = "qcom,android-usb"; |
| reg = <0xfe8050c8 0xc8>; |
| qcom,android-usb-swfi-latency = <1>; |
| }; |
| |
| spmi_bus: qcom,spmi@fc4c0000 { |
| cell-index = <0>; |
| compatible = "qcom,spmi-pmic-arb"; |
| reg-names = "core", "intr", "cnfg"; |
| reg = <0xfc4cf000 0x1000>, |
| <0Xfc4cb000 0x1000>, |
| <0Xfc4ca000 0x1000>; |
| /* 190,ee0_krait_hlos_spmi_periph_irq */ |
| /* 187,channel_0_krait_hlos_trans_done_irq */ |
| interrupts = <0 190 0 0 187 0>; |
| qcom,not-wakeup; |
| qcom,pmic-arb-ee = <0>; |
| qcom,pmic-arb-channel = <0>; |
| }; |
| |
| sdcc1: qcom,sdcc@f9824000 { |
| cell-index = <1>; /* SDC1 eMMC slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf9824000 0x800>; |
| reg-names = "core_mem"; |
| interrupts = <0 123 0>; |
| interrupt-names = "core_irq"; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */ |
| qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sup-voltages = <2950 2950>; |
| qcom,bus-width = <8>; |
| qcom,nonremovable; |
| qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; |
| }; |
| |
| sdcc2: qcom,sdcc@f98a4000 { |
| cell-index = <2>; /* SDC2 SD card slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf98a4000 0x800>; |
| reg-names = "core_mem"; |
| interrupts = <0 125 0>; |
| interrupt-names = "core_irq"; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */ |
| qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sup-voltages = <2950 2950>; |
| qcom,bus-width = <4>; |
| qcom,xpc; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| qcom,current-limit = <800>; |
| }; |
| |
| qcom,sps@f9980000 { |
| compatible = "qcom,msm_sps"; |
| reg = <0xf9984000 0x15000>, |
| <0xf9999000 0xb000>; |
| reg-names = "bam_mem", "core_mem"; |
| interrupts = <0 94 0>; |
| qcom,pipe-attr-ee; |
| }; |
| |
| sata: sata@fc580000 { |
| compatible = "qcom,msm-ahci"; |
| reg = <0xfc580000 0x17c>; |
| interrupts = <0 243 0>; |
| }; |
| |
| qcom,wdt@f9017000 { |
| compatible = "qcom,msm-watchdog"; |
| reg = <0xf9017000 0x1000>; |
| interrupts = <0 3 0>, <0 4 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping; |
| }; |
| |
| qcom,ocmem@fdd00000 { |
| compatible = "qcom,msm-ocmem"; |
| reg = <0xfdd00000 0x2000>, |
| <0xfdd02000 0x2000>, |
| <0xfe070000 0x400>, |
| <0xfec00000 0x180000>; |
| reg-names = "ocmem_ctrl_physical", "dm_ctrl_physical", "br_ctrl_physical", "ocmem_physical"; |
| interrupts = <0 76 0>, <0 77 0>; |
| interrupt-names = "ocmem_irq", "dm_irq"; |
| qcom,ocmem-num-regions = <0x3>; |
| qcom,ocmem-num-macros = <0x18>; |
| qcom,resource-type = <0x706d636f>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xfec00000 0x180000>; |
| |
| partition@0 { |
| reg = <0x0 0x100000>; |
| qcom,ocmem-part-name = "graphics"; |
| qcom,ocmem-part-min = <0x80000>; |
| }; |
| |
| partition@80000 { |
| reg = <0x100000 0x80000>; |
| qcom,ocmem-part-name = "lp_audio"; |
| qcom,ocmem-part-min = <0x80000>; |
| }; |
| |
| partition@100000 { |
| reg = <0x100000 0x80000>; |
| qcom,ocmem-part-name = "video"; |
| qcom,ocmem-part-min = <0x55000>; |
| }; |
| }; |
| }; |
| |
| &gdsc_venus { |
| status = "ok"; |
| }; |
| |
| &gdsc_mdss { |
| status = "ok"; |
| }; |
| |
| &gdsc_jpeg { |
| status = "ok"; |
| }; |
| |
| &gdsc_vpu { |
| status = "ok"; |
| }; |
| |
| &gdsc_oxili_gx { |
| status = "ok"; |
| }; |
| |
| &gdsc_oxili_cx { |
| status = "ok"; |
| }; |
| |
| &gdsc_usb_hsic { |
| status = "ok"; |
| }; |
| |
| /include/ "msm-pma8084.dtsi" |
| /include/ "mpq8092-regulator.dtsi" |