powerpc: tracing: Add hypervisor call tracepoints
Add hcall_entry and hcall_exit tracepoints. This replaces the inline
assembly HCALL_STATS code and converts it to use the new tracepoints.
To keep the disabled case as quick as possible, we embed a status word
in the TOC so we can get at it with a single load. By doing so we
keep the overhead at a minimum. Time taken for a null hcall:
No tracepoint code: 135.79 cycles
Disabled tracepoints: 137.95 cycles
For reference, before this patch enabling HCALL_STATS resulted in a null
hcall of 201.44 cycles!
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 3b10051..bf3382f 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -46,7 +46,7 @@
config HCALL_STATS
bool "Hypervisor call instrumentation"
- depends on PPC_PSERIES && DEBUG_FS
+ depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
help
Adds code to keep track of the number of hypervisor calls made and
the amount of time spent in hypervisor calls. Wall time spent in
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 6251a4b..c27caac 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -274,6 +274,8 @@
unsigned long num_calls; /* number of calls (on this CPU) */
unsigned long tb_total; /* total wall time (mftb) of calls. */
unsigned long purr_total; /* total cpu time (PURR) of calls. */
+ unsigned long tb_start;
+ unsigned long purr_start;
};
#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1)
diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h
index b558c31..9b01c0e 100644
--- a/arch/powerpc/include/asm/trace.h
+++ b/arch/powerpc/include/asm/trace.h
@@ -76,6 +76,51 @@
TP_printk("pt_regs=%p", __entry->regs)
);
+#ifdef CONFIG_PPC_PSERIES
+extern void hcall_tracepoint_regfunc(void);
+extern void hcall_tracepoint_unregfunc(void);
+
+TRACE_EVENT_FN(hcall_entry,
+
+ TP_PROTO(unsigned long opcode),
+
+ TP_ARGS(opcode),
+
+ TP_STRUCT__entry(
+ __field(unsigned long, opcode)
+ ),
+
+ TP_fast_assign(
+ __entry->opcode = opcode;
+ ),
+
+ TP_printk("opcode=%lu", __entry->opcode),
+
+ hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+
+TRACE_EVENT_FN(hcall_exit,
+
+ TP_PROTO(unsigned long opcode, unsigned long retval),
+
+ TP_ARGS(opcode, retval),
+
+ TP_STRUCT__entry(
+ __field(unsigned long, opcode)
+ __field(unsigned long, retval)
+ ),
+
+ TP_fast_assign(
+ __entry->opcode = opcode;
+ __entry->retval = retval;
+ ),
+
+ TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval),
+
+ hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+#endif
+
#endif /* _TRACE_POWERPC_H */
#undef TRACE_INCLUDE_PATH
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index c1427b3..01e95ab 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -14,20 +14,54 @@
#define STK_PARM(i) (48 + ((i)-3)*8)
-#ifdef CONFIG_HCALL_STATS
+#ifdef CONFIG_TRACEPOINTS
+
+ .section ".toc","aw"
+
+ .globl hcall_tracepoint_refcount
+hcall_tracepoint_refcount:
+ .llong 0
+
+ .section ".text"
+
/*
* precall must preserve all registers. use unused STK_PARM()
- * areas to save snapshots and opcode.
+ * areas to save snapshots and opcode. We branch around this
+ * in early init (eg when populating the MMU hashtable) by using an
+ * unconditional cpu feature.
*/
#define HCALL_INST_PRECALL \
- std r3,STK_PARM(r3)(r1); /* save opcode */ \
- mftb r0; /* get timebase and */ \
- std r0,STK_PARM(r5)(r1); /* save for later */ \
BEGIN_FTR_SECTION; \
- mfspr r0,SPRN_PURR; /* get PURR and */ \
- std r0,STK_PARM(r6)(r1); /* save for later */ \
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);
-
+ b 1f; \
+END_FTR_SECTION(0, 1); \
+ ld r12,hcall_tracepoint_refcount@toc(r2); \
+ cmpdi r12,0; \
+ beq+ 1f; \
+ mflr r0; \
+ std r3,STK_PARM(r3)(r1); \
+ std r4,STK_PARM(r4)(r1); \
+ std r5,STK_PARM(r5)(r1); \
+ std r6,STK_PARM(r6)(r1); \
+ std r7,STK_PARM(r7)(r1); \
+ std r8,STK_PARM(r8)(r1); \
+ std r9,STK_PARM(r9)(r1); \
+ std r10,STK_PARM(r10)(r1); \
+ std r0,16(r1); \
+ stdu r1,-STACK_FRAME_OVERHEAD(r1); \
+ bl .__trace_hcall_entry; \
+ addi r1,r1,STACK_FRAME_OVERHEAD; \
+ ld r0,16(r1); \
+ ld r3,STK_PARM(r3)(r1); \
+ ld r4,STK_PARM(r4)(r1); \
+ ld r5,STK_PARM(r5)(r1); \
+ ld r6,STK_PARM(r6)(r1); \
+ ld r7,STK_PARM(r7)(r1); \
+ ld r8,STK_PARM(r8)(r1); \
+ ld r9,STK_PARM(r9)(r1); \
+ ld r10,STK_PARM(r10)(r1); \
+ mtlr r0; \
+1:
+
/*
* postcall is performed immediately before function return which
* allows liberal use of volatile registers. We branch around this
@@ -38,40 +72,21 @@
BEGIN_FTR_SECTION; \
b 1f; \
END_FTR_SECTION(0, 1); \
- ld r4,STK_PARM(r3)(r1); /* validate opcode */ \
- cmpldi cr7,r4,MAX_HCALL_OPCODE; \
- bgt- cr7,1f; \
- \
- /* get time and PURR snapshots after hcall */ \
- mftb r7; /* timebase after */ \
-BEGIN_FTR_SECTION; \
- mfspr r8,SPRN_PURR; /* PURR after */ \
- ld r6,STK_PARM(r6)(r1); /* PURR before */ \
- subf r6,r6,r8; /* delta */ \
-END_FTR_SECTION_IFSET(CPU_FTR_PURR); \
- ld r5,STK_PARM(r5)(r1); /* timebase before */ \
- subf r5,r5,r7; /* time delta */ \
- \
- /* calculate address of stat structure r4 = opcode */ \
- srdi r4,r4,2; /* index into array */ \
- mulli r4,r4,HCALL_STAT_SIZE; \
- LOAD_REG_ADDR(r7, per_cpu__hcall_stats); \
- add r4,r4,r7; \
- ld r7,PACA_DATA_OFFSET(r13); /* per cpu offset */ \
- add r4,r4,r7; \
- \
- /* update stats */ \
- ld r7,HCALL_STAT_CALLS(r4); /* count */ \
- addi r7,r7,1; \
- std r7,HCALL_STAT_CALLS(r4); \
- ld r7,HCALL_STAT_TB(r4); /* timebase */ \
- add r7,r7,r5; \
- std r7,HCALL_STAT_TB(r4); \
-BEGIN_FTR_SECTION; \
- ld r7,HCALL_STAT_PURR(r4); /* PURR */ \
- add r7,r7,r6; \
- std r7,HCALL_STAT_PURR(r4); \
-END_FTR_SECTION_IFSET(CPU_FTR_PURR); \
+ ld r12,hcall_tracepoint_refcount@toc(r2); \
+ cmpdi r12,0; \
+ beq+ 1f; \
+ mflr r0; \
+ ld r6,STK_PARM(r3)(r1); \
+ std r3,STK_PARM(r3)(r1); \
+ mr r4,r3; \
+ mr r3,r6; \
+ std r0,16(r1); \
+ stdu r1,-STACK_FRAME_OVERHEAD(r1); \
+ bl .__trace_hcall_exit; \
+ addi r1,r1,STACK_FRAME_OVERHEAD; \
+ ld r0,16(r1); \
+ ld r3,STK_PARM(r3)(r1); \
+ mtlr r0; \
1:
#else
#define HCALL_INST_PRECALL
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index 3631a4f..e44e103 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -26,6 +26,7 @@
#include <asm/hvcall.h>
#include <asm/firmware.h>
#include <asm/cputable.h>
+#include <asm/trace.h>
DEFINE_PER_CPU(struct hcall_stats[HCALL_STAT_ARRAY_SIZE], hcall_stats);
@@ -100,6 +101,34 @@
#define HCALL_ROOT_DIR "hcall_inst"
#define CPU_NAME_BUF_SIZE 32
+
+static void probe_hcall_entry(unsigned long opcode)
+{
+ struct hcall_stats *h;
+
+ if (opcode > MAX_HCALL_OPCODE)
+ return;
+
+ h = &get_cpu_var(hcall_stats)[opcode / 4];
+ h->tb_start = mftb();
+ h->purr_start = mfspr(SPRN_PURR);
+}
+
+static void probe_hcall_exit(unsigned long opcode, unsigned long retval)
+{
+ struct hcall_stats *h;
+
+ if (opcode > MAX_HCALL_OPCODE)
+ return;
+
+ h = &__get_cpu_var(hcall_stats)[opcode / 4];
+ h->num_calls++;
+ h->tb_total = mftb() - h->tb_start;
+ h->purr_total = mfspr(SPRN_PURR) - h->purr_start;
+
+ put_cpu_var(hcall_stats);
+}
+
static int __init hcall_inst_init(void)
{
struct dentry *hcall_root;
@@ -110,6 +139,14 @@
if (!firmware_has_feature(FW_FEATURE_LPAR))
return 0;
+ if (register_trace_hcall_entry(probe_hcall_entry))
+ return -EINVAL;
+
+ if (register_trace_hcall_exit(probe_hcall_exit)) {
+ unregister_trace_hcall_entry(probe_hcall_entry);
+ return -EINVAL;
+ }
+
hcall_root = debugfs_create_dir(HCALL_ROOT_DIR, NULL);
if (!hcall_root)
return -ENOMEM;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 903eb9e..4b7b6e8 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -39,6 +39,7 @@
#include <asm/cputable.h>
#include <asm/udbg.h>
#include <asm/smp.h>
+#include <asm/trace.h>
#include "plpar_wrappers.h"
#include "pseries.h"
@@ -661,3 +662,34 @@
EXPORT_SYMBOL(arch_free_page);
#endif
+
+#ifdef CONFIG_TRACEPOINTS
+/*
+ * We optimise our hcall path by placing hcall_tracepoint_refcount
+ * directly in the TOC so we can check if the hcall tracepoints are
+ * enabled via a single load.
+ */
+
+/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
+extern long hcall_tracepoint_refcount;
+
+void hcall_tracepoint_regfunc(void)
+{
+ hcall_tracepoint_refcount++;
+}
+
+void hcall_tracepoint_unregfunc(void)
+{
+ hcall_tracepoint_refcount--;
+}
+
+void __trace_hcall_entry(unsigned long opcode)
+{
+ trace_hcall_entry(opcode);
+}
+
+void __trace_hcall_exit(long opcode, unsigned long retval)
+{
+ trace_hcall_exit(opcode, retval);
+}
+#endif