| /* |
| * Infinity Unlimited USB Phoenix driver |
| * |
| * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com) |
| * |
| * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * And tested with help of WB Electronics |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/tty_driver.h> |
| #include <linux/tty_flip.h> |
| #include <linux/serial.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/spinlock.h> |
| #include <linux/uaccess.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| #include "iuu_phoenix.h" |
| #include <linux/random.h> |
| |
| |
| #ifdef CONFIG_USB_SERIAL_DEBUG |
| static int debug = 1; |
| #else |
| static int debug; |
| #endif |
| |
| /* |
| * Version Information |
| */ |
| #define DRIVER_VERSION "v0.5" |
| #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" |
| |
| static struct usb_device_id id_table[] = { |
| {USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)}, |
| {} /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| static struct usb_driver iuu_driver = { |
| .name = "iuu_phoenix", |
| .probe = usb_serial_probe, |
| .disconnect = usb_serial_disconnect, |
| .id_table = id_table, |
| .no_dynamic_id = 1, |
| }; |
| |
| /* turbo parameter */ |
| static int boost = 100; |
| static int clockmode = 1; |
| static int cdmode = 1; |
| static int iuu_cardin; |
| static int iuu_cardout; |
| static int xmas; |
| |
| static void read_rxcmd_callback(struct urb *urb); |
| |
| struct iuu_private { |
| spinlock_t lock; /* store irq state */ |
| wait_queue_head_t delta_msr_wait; |
| u8 line_control; |
| u8 line_status; |
| u8 termios_initialized; |
| int tiostatus; /* store IUART SIGNAL for tiocmget call */ |
| u8 reset; /* if 1 reset is needed */ |
| int poll; /* number of poll */ |
| u8 *writebuf; /* buffer for writing to device */ |
| int writelen; /* num of byte to write to device */ |
| u8 *buf; /* used for initialize speed */ |
| u8 *dbgbuf; /* debug buffer */ |
| u8 len; |
| }; |
| |
| |
| static void iuu_free_buf(struct iuu_private *priv) |
| { |
| kfree(priv->buf); |
| kfree(priv->dbgbuf); |
| kfree(priv->writebuf); |
| } |
| |
| static int iuu_alloc_buf(struct iuu_private *priv) |
| { |
| priv->buf = kzalloc(256, GFP_KERNEL); |
| priv->dbgbuf = kzalloc(256, GFP_KERNEL); |
| priv->writebuf = kzalloc(256, GFP_KERNEL); |
| if (!priv->buf || !priv->dbgbuf || !priv->writebuf) { |
| iuu_free_buf(priv); |
| dbg("%s problem allocation buffer", __func__); |
| return -ENOMEM; |
| } |
| dbg("%s - Privates buffers allocation success", __func__); |
| return 0; |
| } |
| |
| static int iuu_startup(struct usb_serial *serial) |
| { |
| struct iuu_private *priv; |
| priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); |
| dbg("%s- priv allocation success", __func__); |
| if (!priv) |
| return -ENOMEM; |
| if (iuu_alloc_buf(priv)) { |
| kfree(priv); |
| return -ENOMEM; |
| } |
| spin_lock_init(&priv->lock); |
| init_waitqueue_head(&priv->delta_msr_wait); |
| usb_set_serial_port_data(serial->port[0], priv); |
| return 0; |
| } |
| |
| /* Shutdown function */ |
| static void iuu_shutdown(struct usb_serial *serial) |
| { |
| struct usb_serial_port *port = serial->port[0]; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| if (!port) |
| return; |
| |
| dbg("%s", __func__); |
| |
| if (priv) { |
| iuu_free_buf(priv); |
| dbg("%s - I will free all", __func__); |
| usb_set_serial_port_data(port, NULL); |
| |
| dbg("%s - priv is not anymore in port structure", __func__); |
| kfree(priv); |
| |
| dbg("%s priv is now kfree", __func__); |
| } |
| } |
| |
| static int iuu_tiocmset(struct tty_struct *tty, struct file *file, |
| unsigned int set, unsigned int clear) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| |
| /* FIXME: locking on tiomstatus */ |
| dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__, |
| port->number, set, clear); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| if (set & TIOCM_RTS) |
| priv->tiostatus = TIOCM_RTS; |
| |
| if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) { |
| dbg("%s TIOCMSET RESET called !!!", __func__); |
| priv->reset = 1; |
| } |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return 0; |
| } |
| |
| /* This is used to provide a carrier detect mechanism |
| * When a card is present, the response is 0x00 |
| * When no card , the reader respond with TIOCM_CD |
| * This is known as CD autodetect mechanism |
| */ |
| static int iuu_tiocmget(struct tty_struct *tty, struct file *file) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| int rc; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| rc = priv->tiostatus; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return rc; |
| } |
| |
| static void iuu_rxcmd(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| int result; |
| dbg("%s - enter", __func__); |
| |
| if (urb->status) { |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| /* error stop all */ |
| return; |
| } |
| |
| |
| memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, 1, |
| read_rxcmd_callback, port); |
| result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| } |
| |
| static int iuu_reset(struct usb_serial_port *port, u8 wt) |
| { |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| int result; |
| char *buf_ptr = port->write_urb->transfer_buffer; |
| dbg("%s - enter", __func__); |
| |
| /* Prepare the reset sequence */ |
| |
| *buf_ptr++ = IUU_RST_SET; |
| *buf_ptr++ = IUU_DELAY_MS; |
| *buf_ptr++ = wt; |
| *buf_ptr = IUU_RST_CLEAR; |
| |
| /* send the sequence */ |
| |
| usb_fill_bulk_urb(port->write_urb, |
| port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, 4, iuu_rxcmd, port); |
| result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| priv->reset = 0; |
| return result; |
| } |
| |
| /* Status Function |
| * Return value is |
| * 0x00 = no card |
| * 0x01 = smartcard |
| * 0x02 = sim card |
| */ |
| static void iuu_update_status_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| u8 *st; |
| dbg("%s - enter", __func__); |
| |
| if (urb->status) { |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| /* error stop all */ |
| return; |
| } |
| |
| st = urb->transfer_buffer; |
| dbg("%s - enter", __func__); |
| if (urb->actual_length == 1) { |
| switch (st[0]) { |
| case 0x1: |
| priv->tiostatus = iuu_cardout; |
| break; |
| case 0x0: |
| priv->tiostatus = iuu_cardin; |
| break; |
| default: |
| priv->tiostatus = iuu_cardin; |
| } |
| } |
| iuu_rxcmd(urb); |
| } |
| |
| static void iuu_status_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| int result; |
| dbg("%s - enter", __func__); |
| |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| usb_fill_bulk_urb(port->read_urb, port->serial->dev, |
| usb_rcvbulkpipe(port->serial->dev, |
| port->bulk_in_endpointAddress), |
| port->read_urb->transfer_buffer, 256, |
| iuu_update_status_callback, port); |
| result = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| } |
| |
| static int iuu_status(struct usb_serial_port *port) |
| { |
| int result; |
| |
| dbg("%s - enter", __func__); |
| |
| memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1); |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, 1, |
| iuu_status_callback, port); |
| result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| return result; |
| |
| } |
| |
| static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) |
| { |
| int status; |
| struct usb_serial *serial = port->serial; |
| int actual = 0; |
| |
| dbg("%s - enter", __func__); |
| |
| /* send the data out the bulk port */ |
| |
| status = |
| usb_bulk_msg(serial->dev, |
| usb_sndbulkpipe(serial->dev, |
| port->bulk_out_endpointAddress), buf, |
| count, &actual, HZ * 1); |
| |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - error = %2x", __func__, status); |
| else |
| dbg("%s - write OK !", __func__); |
| return status; |
| } |
| |
| static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) |
| { |
| int status; |
| struct usb_serial *serial = port->serial; |
| int actual = 0; |
| |
| dbg("%s - enter", __func__); |
| |
| /* send the data out the bulk port */ |
| |
| status = |
| usb_bulk_msg(serial->dev, |
| usb_rcvbulkpipe(serial->dev, |
| port->bulk_in_endpointAddress), buf, |
| count, &actual, HZ * 1); |
| |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - error = %2x", __func__, status); |
| else |
| dbg("%s - read OK !", __func__); |
| return status; |
| } |
| |
| static int iuu_led(struct usb_serial_port *port, unsigned int R, |
| unsigned int G, unsigned int B, u8 f) |
| { |
| int status; |
| u8 *buf; |
| buf = kmalloc(8, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| dbg("%s - enter", __func__); |
| |
| buf[0] = IUU_SET_LED; |
| buf[1] = R & 0xFF; |
| buf[2] = (R >> 8) & 0xFF; |
| buf[3] = G & 0xFF; |
| buf[4] = (G >> 8) & 0xFF; |
| buf[5] = B & 0xFF; |
| buf[6] = (B >> 8) & 0xFF; |
| buf[7] = f; |
| status = bulk_immediate(port, buf, 8); |
| kfree(buf); |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - led error status = %2x", __func__, status); |
| else |
| dbg("%s - led OK !", __func__); |
| return IUU_OPERATION_OK; |
| } |
| |
| static void iuu_rgbf_fill_buffer(u8 *buf, u8 r1, u8 r2, u8 g1, u8 g2, u8 b1, |
| u8 b2, u8 freq) |
| { |
| *buf++ = IUU_SET_LED; |
| *buf++ = r1; |
| *buf++ = r2; |
| *buf++ = g1; |
| *buf++ = g2; |
| *buf++ = b1; |
| *buf++ = b2; |
| *buf = freq; |
| } |
| |
| static void iuu_led_activity_on(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| int result; |
| char *buf_ptr = port->write_urb->transfer_buffer; |
| *buf_ptr++ = IUU_SET_LED; |
| if (xmas == 1) { |
| get_random_bytes(buf_ptr, 6); |
| *(buf_ptr+7) = 1; |
| } else { |
| iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255); |
| } |
| |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, 8 , |
| iuu_rxcmd, port); |
| result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| } |
| |
| static void iuu_led_activity_off(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| int result; |
| char *buf_ptr = port->write_urb->transfer_buffer; |
| if (xmas == 1) { |
| iuu_rxcmd(urb); |
| return; |
| } else { |
| *buf_ptr++ = IUU_SET_LED; |
| iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255); |
| } |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, 8 , |
| iuu_rxcmd, port); |
| result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| } |
| |
| |
| |
| static int iuu_clk(struct usb_serial_port *port, int dwFrq) |
| { |
| int status; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| int Count = 0; |
| u8 FrqGenAdr = 0x69; |
| u8 DIV = 0; /* 8bit */ |
| u8 XDRV = 0; /* 8bit */ |
| u8 PUMP = 0; /* 3bit */ |
| u8 PBmsb = 0; /* 2bit */ |
| u8 PBlsb = 0; /* 8bit */ |
| u8 PO = 0; /* 1bit */ |
| u8 Q = 0; /* 7bit */ |
| /* 24bit = 3bytes */ |
| unsigned int P = 0; |
| unsigned int P2 = 0; |
| int frq = (int)dwFrq; |
| |
| dbg("%s - enter", __func__); |
| |
| if (frq == 0) { |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x09; |
| priv->buf[Count++] = 0x00; |
| |
| status = bulk_immediate(port, (u8 *) priv->buf, Count); |
| if (status != 0) { |
| dbg("%s - write error ", __func__); |
| return status; |
| } |
| } else if (frq == 3579000) { |
| DIV = 100; |
| P = 1193; |
| Q = 40; |
| XDRV = 0; |
| } else if (frq == 3680000) { |
| DIV = 105; |
| P = 161; |
| Q = 5; |
| XDRV = 0; |
| } else if (frq == 6000000) { |
| DIV = 66; |
| P = 66; |
| Q = 2; |
| XDRV = 0x28; |
| } else { |
| unsigned int result = 0; |
| unsigned int tmp = 0; |
| unsigned int check; |
| unsigned int check2; |
| char found = 0x00; |
| unsigned int lQ = 2; |
| unsigned int lP = 2055; |
| unsigned int lDiv = 4; |
| |
| for (lQ = 2; lQ <= 47 && !found; lQ++) |
| for (lP = 2055; lP >= 8 && !found; lP--) |
| for (lDiv = 4; lDiv <= 127 && !found; lDiv++) { |
| tmp = (12000000 / lDiv) * (lP / lQ); |
| if (abs((int)(tmp - frq)) < |
| abs((int)(frq - result))) { |
| check2 = (12000000 / lQ); |
| if (check2 < 250000) |
| continue; |
| check = (12000000 / lQ) * lP; |
| if (check > 400000000) |
| continue; |
| if (check < 100000000) |
| continue; |
| if (lDiv < 4 || lDiv > 127) |
| continue; |
| result = tmp; |
| P = lP; |
| DIV = lDiv; |
| Q = lQ; |
| if (result == frq) |
| found = 0x01; |
| } |
| } |
| } |
| P2 = ((P - PO) / 2) - 4; |
| DIV = DIV; |
| PUMP = 0x04; |
| PBmsb = (P2 >> 8 & 0x03); |
| PBlsb = P2 & 0xFF; |
| PO = (P >> 10) & 0x01; |
| Q = Q - 2; |
| |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x09; |
| priv->buf[Count++] = 0x20; /* Adr = 0x09 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x0C; |
| priv->buf[Count++] = DIV; /* Adr = 0x0C */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x12; |
| priv->buf[Count++] = XDRV; /* Adr = 0x12 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x13; |
| priv->buf[Count++] = 0x6B; /* Adr = 0x13 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x40; |
| priv->buf[Count++] = (0xC0 | ((PUMP & 0x07) << 2)) | |
| (PBmsb & 0x03); /* Adr = 0x40 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x41; |
| priv->buf[Count++] = PBlsb; /* Adr = 0x41 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x42; |
| priv->buf[Count++] = Q | (((PO & 0x01) << 7)); /* Adr = 0x42 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x44; |
| priv->buf[Count++] = (char)0xFF; /* Adr = 0x44 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x45; |
| priv->buf[Count++] = (char)0xFE; /* Adr = 0x45 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x46; |
| priv->buf[Count++] = 0x7F; /* Adr = 0x46 */ |
| priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ |
| priv->buf[Count++] = FrqGenAdr << 1; |
| priv->buf[Count++] = 0x47; |
| priv->buf[Count++] = (char)0x84; /* Adr = 0x47 */ |
| |
| status = bulk_immediate(port, (u8 *) priv->buf, Count); |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - write error ", __func__); |
| return status; |
| } |
| |
| static int iuu_uart_flush(struct usb_serial_port *port) |
| { |
| int i; |
| int status; |
| u8 rxcmd = IUU_UART_RX; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| |
| dbg("%s - enter", __func__); |
| |
| if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0) |
| return -EIO; |
| |
| for (i = 0; i < 2; i++) { |
| status = bulk_immediate(port, &rxcmd, 1); |
| if (status != IUU_OPERATION_OK) { |
| dbg("%s - uart_flush_write error", __func__); |
| return status; |
| } |
| |
| status = read_immediate(port, &priv->len, 1); |
| if (status != IUU_OPERATION_OK) { |
| dbg("%s - uart_flush_read error", __func__); |
| return status; |
| } |
| |
| if (priv->len > 0) { |
| dbg("%s - uart_flush datalen is : %i ", __func__, |
| priv->len); |
| status = read_immediate(port, priv->buf, priv->len); |
| if (status != IUU_OPERATION_OK) { |
| dbg("%s - uart_flush_read error", __func__); |
| return status; |
| } |
| } |
| } |
| dbg("%s - uart_flush_read OK!", __func__); |
| iuu_led(port, 0, 0xF000, 0, 0xFF); |
| return status; |
| } |
| |
| static void read_buf_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| unsigned char *data = urb->transfer_buffer; |
| struct tty_struct *tty; |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| |
| if (urb->status) { |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| if (urb->status == -EPROTO) { |
| /* reschedule needed */ |
| } |
| return; |
| } |
| |
| dbg("%s - %i chars to write", __func__, urb->actual_length); |
| tty = tty_port_tty_get(&port->port); |
| if (data == NULL) |
| dbg("%s - data is NULL !!!", __func__); |
| if (tty && urb->actual_length && data) { |
| tty_insert_flip_string(tty, data, urb->actual_length); |
| tty_flip_buffer_push(tty); |
| } |
| tty_kref_put(tty); |
| iuu_led_activity_on(urb); |
| } |
| |
| static int iuu_bulk_write(struct usb_serial_port *port) |
| { |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| int result; |
| int i; |
| char *buf_ptr = port->write_urb->transfer_buffer; |
| dbg("%s - enter", __func__); |
| |
| *buf_ptr++ = IUU_UART_ESC; |
| *buf_ptr++ = IUU_UART_TX; |
| *buf_ptr++ = priv->writelen; |
| |
| memcpy(buf_ptr, priv->writebuf, |
| priv->writelen); |
| if (debug == 1) { |
| for (i = 0; i < priv->writelen; i++) |
| sprintf(priv->dbgbuf + i*2 , |
| "%02X", priv->writebuf[i]); |
| priv->dbgbuf[priv->writelen+i*2] = 0; |
| dbg("%s - writing %i chars : %s", __func__, |
| priv->writelen, priv->dbgbuf); |
| } |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, priv->writelen + 3, |
| iuu_rxcmd, port); |
| result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->writelen = 0; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| usb_serial_port_softint(port); |
| return result; |
| } |
| |
| static int iuu_read_buf(struct usb_serial_port *port, int len) |
| { |
| int result; |
| dbg("%s - enter", __func__); |
| |
| usb_fill_bulk_urb(port->read_urb, port->serial->dev, |
| usb_rcvbulkpipe(port->serial->dev, |
| port->bulk_in_endpointAddress), |
| port->read_urb->transfer_buffer, len, |
| read_buf_callback, port); |
| result = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| return result; |
| } |
| |
| static void iuu_uart_read_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| int status; |
| int error = 0; |
| int len = 0; |
| unsigned char *data = urb->transfer_buffer; |
| priv->poll++; |
| |
| dbg("%s - enter", __func__); |
| |
| if (urb->status) { |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| /* error stop all */ |
| return; |
| } |
| if (data == NULL) |
| dbg("%s - data is NULL !!!", __func__); |
| |
| if (urb->actual_length == 1 && data != NULL) |
| len = (int) data[0]; |
| |
| if (urb->actual_length > 1) { |
| dbg("%s - urb->actual_length = %i", __func__, |
| urb->actual_length); |
| error = 1; |
| return; |
| } |
| /* if len > 0 call readbuf */ |
| |
| if (len > 0 && error == 0) { |
| dbg("%s - call read buf - len to read is %i ", |
| __func__, len); |
| status = iuu_read_buf(port, len); |
| return; |
| } |
| /* need to update status ? */ |
| if (priv->poll > 99) { |
| status = iuu_status(port); |
| priv->poll = 0; |
| return; |
| } |
| |
| /* reset waiting ? */ |
| |
| if (priv->reset == 1) { |
| status = iuu_reset(port, 0xC); |
| return; |
| } |
| /* Writebuf is waiting */ |
| spin_lock_irqsave(&priv->lock, flags); |
| if (priv->writelen > 0) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| status = iuu_bulk_write(port); |
| return; |
| } |
| spin_unlock_irqrestore(&priv->lock, flags); |
| /* if nothing to write call again rxcmd */ |
| dbg("%s - rxcmd recall", __func__); |
| iuu_led_activity_off(urb); |
| } |
| |
| static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, |
| const u8 *buf, int count) |
| { |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| dbg("%s - enter", __func__); |
| |
| if (count > 256) |
| return -ENOMEM; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| if (priv->writelen > 0) { |
| /* buffer already filled but not commited */ |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return 0; |
| } |
| /* fill the buffer */ |
| memcpy(priv->writebuf, buf, count); |
| priv->writelen = count; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return count; |
| } |
| |
| static void read_rxcmd_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| int result; |
| dbg("%s - enter", __func__); |
| |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| |
| if (urb->status) { |
| dbg("%s - urb->status = %d", __func__, urb->status); |
| /* error stop all */ |
| return; |
| } |
| |
| usb_fill_bulk_urb(port->read_urb, port->serial->dev, |
| usb_rcvbulkpipe(port->serial->dev, |
| port->bulk_in_endpointAddress), |
| port->read_urb->transfer_buffer, 256, |
| iuu_uart_read_callback, port); |
| result = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| dbg("%s - submit result = %d", __func__, result); |
| return; |
| } |
| |
| static int iuu_uart_on(struct usb_serial_port *port) |
| { |
| int status; |
| u8 *buf; |
| |
| buf = kmalloc(sizeof(u8) * 4, GFP_KERNEL); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| buf[0] = IUU_UART_ENABLE; |
| buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); |
| buf[2] = (u8) (0x00FF & IUU_BAUD_9600); |
| buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN); |
| |
| status = bulk_immediate(port, buf, 4); |
| if (status != IUU_OPERATION_OK) { |
| dbg("%s - uart_on error", __func__); |
| goto uart_enable_failed; |
| } |
| /* iuu_reset() the card after iuu_uart_on() */ |
| status = iuu_uart_flush(port); |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - uart_flush error", __func__); |
| uart_enable_failed: |
| kfree(buf); |
| return status; |
| } |
| |
| /* Diables the IUU UART (a.k.a. the Phoenix voiderface) */ |
| static int iuu_uart_off(struct usb_serial_port *port) |
| { |
| int status; |
| u8 *buf; |
| buf = kmalloc(1, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| buf[0] = IUU_UART_DISABLE; |
| |
| status = bulk_immediate(port, buf, 1); |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - uart_off error", __func__); |
| |
| kfree(buf); |
| return status; |
| } |
| |
| static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, |
| u32 *actual, u8 parity) |
| { |
| int status; |
| u8 *dataout; |
| u8 DataCount = 0; |
| u8 T1Frekvens = 0; |
| u8 T1reload = 0; |
| unsigned int T1FrekvensHZ = 0; |
| |
| dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL); |
| |
| if (!dataout) |
| return -ENOMEM; |
| |
| if (baud < 1200 || baud > 230400) { |
| kfree(dataout); |
| return IUU_INVALID_PARAMETER; |
| } |
| if (baud > 977) { |
| T1Frekvens = 3; |
| T1FrekvensHZ = 500000; |
| } |
| |
| if (baud > 3906) { |
| T1Frekvens = 2; |
| T1FrekvensHZ = 2000000; |
| } |
| |
| if (baud > 11718) { |
| T1Frekvens = 1; |
| T1FrekvensHZ = 6000000; |
| } |
| |
| if (baud > 46875) { |
| T1Frekvens = 0; |
| T1FrekvensHZ = 24000000; |
| } |
| |
| T1reload = 256 - (u8) (T1FrekvensHZ / (baud * 2)); |
| |
| /* magic number here: ENTER_FIRMWARE_UPDATE; */ |
| dataout[DataCount++] = IUU_UART_ESC; |
| /* magic number here: CHANGE_BAUD; */ |
| dataout[DataCount++] = IUU_UART_CHANGE; |
| dataout[DataCount++] = T1Frekvens; |
| dataout[DataCount++] = T1reload; |
| |
| *actual = (T1FrekvensHZ / (256 - T1reload)) / 2; |
| |
| switch (parity & 0x0F) { |
| case IUU_PARITY_NONE: |
| dataout[DataCount++] = 0x00; |
| break; |
| case IUU_PARITY_EVEN: |
| dataout[DataCount++] = 0x01; |
| break; |
| case IUU_PARITY_ODD: |
| dataout[DataCount++] = 0x02; |
| break; |
| case IUU_PARITY_MARK: |
| dataout[DataCount++] = 0x03; |
| break; |
| case IUU_PARITY_SPACE: |
| dataout[DataCount++] = 0x04; |
| break; |
| default: |
| kfree(dataout); |
| return IUU_INVALID_PARAMETER; |
| break; |
| } |
| |
| switch (parity & 0xF0) { |
| case IUU_ONE_STOP_BIT: |
| dataout[DataCount - 1] |= IUU_ONE_STOP_BIT; |
| break; |
| |
| case IUU_TWO_STOP_BITS: |
| dataout[DataCount - 1] |= IUU_TWO_STOP_BITS; |
| break; |
| default: |
| kfree(dataout); |
| return IUU_INVALID_PARAMETER; |
| break; |
| } |
| |
| status = bulk_immediate(port, dataout, DataCount); |
| if (status != IUU_OPERATION_OK) |
| dbg("%s - uart_off error", __func__); |
| kfree(dataout); |
| return status; |
| } |
| |
| static int set_control_lines(struct usb_device *dev, u8 value) |
| { |
| return 0; |
| } |
| |
| static void iuu_close(struct tty_struct *tty, |
| struct usb_serial_port *port, struct file *filp) |
| { |
| /* iuu_led (port,255,0,0,0); */ |
| struct usb_serial *serial; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| unsigned int c_cflag; |
| |
| serial = port->serial; |
| if (!serial) |
| return; |
| |
| dbg("%s - port %d", __func__, port->number); |
| |
| iuu_uart_off(port); |
| if (serial->dev) { |
| if (tty) { |
| c_cflag = tty->termios->c_cflag; |
| if (c_cflag & HUPCL) { |
| /* drop DTR and RTS */ |
| priv = usb_get_serial_port_data(port); |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_control = 0; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| set_control_lines(port->serial->dev, 0); |
| } |
| } |
| /* free writebuf */ |
| /* shutdown our urbs */ |
| dbg("%s - shutting down urbs", __func__); |
| usb_kill_urb(port->write_urb); |
| usb_kill_urb(port->read_urb); |
| usb_kill_urb(port->interrupt_in_urb); |
| msleep(1000); |
| /* wait one second to free all buffers */ |
| iuu_led(port, 0, 0, 0xF000, 0xFF); |
| msleep(1000); |
| usb_reset_device(port->serial->dev); |
| } |
| } |
| |
| static int iuu_open(struct tty_struct *tty, |
| struct usb_serial_port *port, struct file *filp) |
| { |
| struct usb_serial *serial = port->serial; |
| u8 *buf; |
| int result; |
| u32 actual; |
| unsigned long flags; |
| struct iuu_private *priv = usb_get_serial_port_data(port); |
| |
| dbg("%s - port %d", __func__, port->number); |
| usb_clear_halt(serial->dev, port->write_urb->pipe); |
| usb_clear_halt(serial->dev, port->read_urb->pipe); |
| |
| buf = kmalloc(10, GFP_KERNEL); |
| if (buf == NULL) |
| return -ENOMEM; |
| |
| /* fixup the endpoint buffer size */ |
| kfree(port->bulk_out_buffer); |
| port->bulk_out_buffer = kmalloc(512, GFP_KERNEL); |
| port->bulk_out_size = 512; |
| kfree(port->bulk_in_buffer); |
| port->bulk_in_buffer = kmalloc(512, GFP_KERNEL); |
| port->bulk_in_size = 512; |
| |
| if (!port->bulk_out_buffer || !port->bulk_in_buffer) { |
| kfree(port->bulk_out_buffer); |
| kfree(port->bulk_in_buffer); |
| kfree(buf); |
| return -ENOMEM; |
| } |
| |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->bulk_out_buffer, 512, |
| NULL, NULL); |
| |
| |
| usb_fill_bulk_urb(port->read_urb, port->serial->dev, |
| usb_rcvbulkpipe(port->serial->dev, |
| port->bulk_in_endpointAddress), |
| port->bulk_in_buffer, 512, |
| NULL, NULL); |
| |
| /* set the termios structure */ |
| spin_lock_irqsave(&priv->lock, flags); |
| if (tty && !priv->termios_initialized) { |
| *(tty->termios) = tty_std_termios; |
| tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 |
| | TIOCM_CTS | CSTOPB | PARENB; |
| tty->termios->c_ispeed = 9600; |
| tty->termios->c_ospeed = 9600; |
| tty->termios->c_lflag = 0; |
| tty->termios->c_oflag = 0; |
| tty->termios->c_iflag = 0; |
| priv->termios_initialized = 1; |
| tty->low_latency = 1; |
| priv->poll = 0; |
| } |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* initialize writebuf */ |
| #define FISH(a, b, c, d) do { \ |
| result = usb_control_msg(port->serial->dev, \ |
| usb_rcvctrlpipe(port->serial->dev, 0), \ |
| b, a, c, d, buf, 1, 1000); \ |
| dbg("0x%x:0x%x:0x%x:0x%x %d - %x", a, b, c, d, result, \ |
| buf[0]); } while (0); |
| |
| #define SOUP(a, b, c, d) do { \ |
| result = usb_control_msg(port->serial->dev, \ |
| usb_sndctrlpipe(port->serial->dev, 0), \ |
| b, a, c, d, NULL, 0, 1000); \ |
| dbg("0x%x:0x%x:0x%x:0x%x %d", a, b, c, d, result); } while (0) |
| |
| /* This is not UART related but IUU USB driver related or something */ |
| /* like that. Basically no IUU will accept any commands from the USB */ |
| /* host unless it has received the following message */ |
| /* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */ |
| |
| SOUP(0x03, 0x02, 0x02, 0x0); |
| kfree(buf); |
| iuu_led(port, 0xF000, 0xF000, 0, 0xFF); |
| iuu_uart_on(port); |
| if (boost < 100) |
| boost = 100; |
| switch (clockmode) { |
| case 2: /* 3.680 Mhz */ |
| iuu_clk(port, IUU_CLK_3680000 * boost / 100); |
| result = |
| iuu_uart_baud(port, 9600 * boost / 100, &actual, |
| IUU_PARITY_EVEN); |
| break; |
| case 3: /* 6.00 Mhz */ |
| iuu_clk(port, IUU_CLK_6000000 * boost / 100); |
| result = |
| iuu_uart_baud(port, 16457 * boost / 100, &actual, |
| IUU_PARITY_EVEN); |
| break; |
| default: /* 3.579 Mhz */ |
| iuu_clk(port, IUU_CLK_3579000 * boost / 100); |
| result = |
| iuu_uart_baud(port, 9600 * boost / 100, &actual, |
| IUU_PARITY_EVEN); |
| } |
| |
| /* set the cardin cardout signals */ |
| switch (cdmode) { |
| case 0: |
| iuu_cardin = 0; |
| iuu_cardout = 0; |
| break; |
| case 1: |
| iuu_cardin = TIOCM_CD; |
| iuu_cardout = 0; |
| break; |
| case 2: |
| iuu_cardin = 0; |
| iuu_cardout = TIOCM_CD; |
| break; |
| case 3: |
| iuu_cardin = TIOCM_DSR; |
| iuu_cardout = 0; |
| break; |
| case 4: |
| iuu_cardin = 0; |
| iuu_cardout = TIOCM_DSR; |
| break; |
| case 5: |
| iuu_cardin = TIOCM_CTS; |
| iuu_cardout = 0; |
| break; |
| case 6: |
| iuu_cardin = 0; |
| iuu_cardout = TIOCM_CTS; |
| break; |
| case 7: |
| iuu_cardin = TIOCM_RNG; |
| iuu_cardout = 0; |
| break; |
| case 8: |
| iuu_cardin = 0; |
| iuu_cardout = TIOCM_RNG; |
| } |
| |
| iuu_uart_flush(port); |
| |
| dbg("%s - initialization done", __func__); |
| |
| memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); |
| usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| usb_sndbulkpipe(port->serial->dev, |
| port->bulk_out_endpointAddress), |
| port->write_urb->transfer_buffer, 1, |
| read_rxcmd_callback, port); |
| result = usb_submit_urb(port->write_urb, GFP_KERNEL); |
| |
| if (result) { |
| dev_err(&port->dev, "%s - failed submitting read urb," |
| " error %d\n", __func__, result); |
| iuu_close(tty, port, NULL); |
| return -EPROTO; |
| } else { |
| dbg("%s - rxcmd OK", __func__); |
| } |
| return result; |
| } |
| |
| static struct usb_serial_driver iuu_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "iuu_phoenix", |
| }, |
| .id_table = id_table, |
| .num_ports = 1, |
| .open = iuu_open, |
| .close = iuu_close, |
| .write = iuu_uart_write, |
| .read_bulk_callback = iuu_uart_read_callback, |
| .tiocmget = iuu_tiocmget, |
| .tiocmset = iuu_tiocmset, |
| .attach = iuu_startup, |
| .shutdown = iuu_shutdown, |
| }; |
| |
| static int __init iuu_init(void) |
| { |
| int retval; |
| retval = usb_serial_register(&iuu_device); |
| if (retval) |
| goto failed_usb_serial_register; |
| retval = usb_register(&iuu_driver); |
| if (retval) |
| goto failed_usb_register; |
| printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" |
| DRIVER_DESC "\n"); |
| return 0; |
| failed_usb_register: |
| usb_serial_deregister(&iuu_device); |
| failed_usb_serial_register: |
| return retval; |
| } |
| |
| static void __exit iuu_exit(void) |
| { |
| usb_deregister(&iuu_driver); |
| usb_serial_deregister(&iuu_device); |
| } |
| |
| module_init(iuu_init); |
| module_exit(iuu_exit); |
| |
| MODULE_AUTHOR("Alain Degreffe eczema@ecze.com"); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_VERSION(DRIVER_VERSION); |
| module_param(debug, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Debug enabled or not"); |
| |
| module_param(xmas, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(xmas, "xmas color enabled or not"); |
| |
| module_param(boost, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(boost, "overclock boost percent 100 to 500"); |
| |
| module_param(clockmode, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(clockmode, "1=3Mhz579,2=3Mhz680,3=6Mhz"); |
| |
| module_param(cdmode, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(cdmode, "Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, " |
| "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING"); |