| /* |
| * arch/arm/mach-ixp23xx/roadrunner.c |
| * |
| * RoadRunner board-specific routines |
| * |
| * Author: Deepak Saxena <dsaxena@plexity.net> |
| * |
| * Copyright 2005 (c) MontaVista Software, Inc. |
| * |
| * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/serial.h> |
| #include <linux/tty.h> |
| #include <linux/bitops.h> |
| #include <linux/ioport.h> |
| #include <linux/serial_8250.h> |
| #include <linux/serial_core.h> |
| #include <linux/device.h> |
| #include <linux/mm.h> |
| #include <linux/pci.h> |
| #include <linux/mtd/physmap.h> |
| |
| #include <asm/types.h> |
| #include <asm/setup.h> |
| #include <asm/memory.h> |
| #include <mach/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/tlbflush.h> |
| #include <asm/pgtable.h> |
| |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/pci.h> |
| |
| /* |
| * Interrupt mapping |
| */ |
| #define INTA IRQ_ROADRUNNER_PCI_INTA |
| #define INTB IRQ_ROADRUNNER_PCI_INTB |
| #define INTC IRQ_ROADRUNNER_PCI_INTC |
| #define INTD IRQ_ROADRUNNER_PCI_INTD |
| |
| #define INTC_PIN IXP23XX_GPIO_PIN_11 |
| #define INTD_PIN IXP23XX_GPIO_PIN_12 |
| |
| static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel, |
| u8 pin) |
| { |
| static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; |
| static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; |
| static int usb_irq[] = {INTB, INTC, INTD, -1}; |
| static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; |
| static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; |
| |
| switch(dev->bus->number) { |
| case 0: |
| switch(dev->devfn) { |
| case 0x0: // PCI-PCI bridge |
| break; |
| case 0x8: // PCI Card Slot |
| return pci_card_slot_irq[pin - 1]; |
| case 0x10: // PMC Slot |
| return pmc_card_slot_irq[pin - 1]; |
| case 0x18: // PMC Slot Secondary Agent |
| break; |
| case 0x20: // IXP Processor |
| break; |
| default: |
| return NO_IRQ; |
| } |
| break; |
| |
| case 1: |
| switch(dev->devfn) { |
| case 0x0: // IDE Controller |
| return (pin == 1) ? INTC : -1; |
| case 0x8: // USB fun 0 |
| case 0x9: // USB fun 1 |
| case 0xa: // USB fun 2 |
| return usb_irq[pin - 1]; |
| case 0x10: // Mini PCI 1 |
| return mini_pci_1_irq[pin-1]; |
| case 0x18: // Mini PCI 2 |
| return mini_pci_2_irq[pin-1]; |
| case 0x20: // MEM slot |
| return (pin == 1) ? INTA : -1; |
| default: |
| return NO_IRQ; |
| } |
| break; |
| |
| default: |
| return NO_IRQ; |
| } |
| |
| return NO_IRQ; |
| } |
| |
| static void __init roadrunner_pci_preinit(void) |
| { |
| irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); |
| irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); |
| |
| ixp23xx_pci_preinit(); |
| } |
| |
| static struct hw_pci roadrunner_pci __initdata = { |
| .nr_controllers = 1, |
| .preinit = roadrunner_pci_preinit, |
| .setup = ixp23xx_pci_setup, |
| .scan = ixp23xx_pci_scan_bus, |
| .map_irq = roadrunner_map_irq, |
| }; |
| |
| static int __init roadrunner_pci_init(void) |
| { |
| if (machine_is_roadrunner()) |
| pci_common_init(&roadrunner_pci); |
| |
| return 0; |
| }; |
| |
| subsys_initcall(roadrunner_pci_init); |
| |
| static struct physmap_flash_data roadrunner_flash_data = { |
| .width = 2, |
| }; |
| |
| static struct resource roadrunner_flash_resource = { |
| .start = 0x90000000, |
| .end = 0x93ffffff, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device roadrunner_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { |
| .platform_data = &roadrunner_flash_data, |
| }, |
| .num_resources = 1, |
| .resource = &roadrunner_flash_resource, |
| }; |
| |
| static void __init roadrunner_init(void) |
| { |
| platform_device_register(&roadrunner_flash); |
| |
| /* |
| * Mark flash as writeable |
| */ |
| IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; |
| IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; |
| IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; |
| IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; |
| |
| ixp23xx_sys_init(); |
| } |
| |
| MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") |
| /* Maintainer: Deepak Saxena */ |
| .map_io = ixp23xx_map_io, |
| .init_irq = ixp23xx_init_irq, |
| .timer = &ixp23xx_timer, |
| .boot_params = 0x00000100, |
| .init_machine = roadrunner_init, |
| MACHINE_END |