drivers/net/wireless: Use wiphy_<level>
Standardize the logging macros used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index e51650e..d687cb7 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -149,16 +149,15 @@
continue;
if (list->channels[i].data != CHAN_HAS_ALL) {
- printk(KERN_ERR "%s:%s%s%s is/are missing for "
- "channel:%d [%d MHz].\n",
- wiphy_name(dev->wiphy),
- (list->channels[i].data & CHAN_HAS_CAL ? "" :
- " [iqauto calibration data]"),
- (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
- " [output power limits]"),
- (list->channels[i].data & CHAN_HAS_CURVE ? "" :
- " [curve data]"),
- list->channels[i].index, list->channels[i].freq);
+ wiphy_err(dev->wiphy,
+ "%s%s%s is/are missing for channel:%d [%d MHz].\n",
+ (list->channels[i].data & CHAN_HAS_CAL ? "" :
+ " [iqauto calibration data]"),
+ (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
+ " [output power limits]"),
+ (list->channels[i].data & CHAN_HAS_CURVE ? "" :
+ " [curve data]"),
+ list->channels[i].index, list->channels[i].freq);
continue;
}
@@ -168,9 +167,8 @@
}
if (j == 0) {
- printk(KERN_ERR "%s: Disabling totally damaged %s band.\n",
- wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ?
- "2 GHz" : "5 GHz");
+ wiphy_err(dev->wiphy, "disabling totally damaged %d GHz band\n",
+ (band == IEEE80211_BAND_2GHZ) ? 2 : 5);
ret = -ENODATA;
goto err_out;
@@ -244,9 +242,9 @@
if ((priv->iq_autocal_len != priv->curve_data->entries) ||
(priv->iq_autocal_len != priv->output_limit->entries))
- printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. "
- "You may not be able to use all channels.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "Unsupported or damaged EEPROM detected. "
+ "You may not be able to use all channels.\n");
max_channel_num = max_t(unsigned int, priv->output_limit->entries,
priv->iq_autocal_len);
@@ -419,15 +417,14 @@
int i;
if (len != (entry_size * num_entries)) {
- printk(KERN_ERR "%s: unknown rssi calibration data packing "
- " type:(%x) len:%d.\n",
- wiphy_name(dev->wiphy), type, len);
+ wiphy_err(dev->wiphy,
+ "unknown rssi calibration data packing type:(%x) len:%d.\n",
+ type, len);
print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
@@ -445,15 +442,14 @@
struct pda_country *country;
if (len != sizeof(*country)) {
- printk(KERN_ERR "%s: found possible invalid default country "
- "eeprom entry. (entry size: %d)\n",
- wiphy_name(dev->wiphy), len);
+ wiphy_err(dev->wiphy,
+ "found possible invalid default country eeprom entry. (entry size: %d)\n",
+ len);
print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
@@ -478,8 +474,8 @@
return -EINVAL;
if (data[0] != 0) {
- printk(KERN_ERR "%s: unknown output power db revision:%x\n",
- wiphy_name(dev->wiphy), data[0]);
+ wiphy_err(dev->wiphy, "unknown output power db revision:%x\n",
+ data[0]);
return -EINVAL;
}
@@ -587,10 +583,9 @@
err = p54_convert_rev1(dev, curve_data);
break;
default:
- printk(KERN_ERR "%s: unknown curve data "
- "revision %d\n",
- wiphy_name(dev->wiphy),
- curve_data->cal_method_rev);
+ wiphy_err(dev->wiphy,
+ "unknown curve data revision %d\n",
+ curve_data->cal_method_rev);
err = -ENODEV;
break;
}
@@ -672,8 +667,8 @@
if (!synth || !priv->iq_autocal || !priv->output_limit ||
!priv->curve_data) {
- printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "not all required entries found in eeprom!\n");
err = -EINVAL;
goto err;
}
@@ -699,15 +694,15 @@
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
- printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
- wiphy_name(dev->wiphy));
+ wiphy_warn(dev->wiphy,
+ "invalid hwaddr! using randomly generated mac addr\n");
random_ether_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
- printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version,
- p54_rf_chips[priv->rxhw]);
+ wiphy_info(dev->wiphy, "hwaddr %pm, mac:isl38%02x rf:%s\n",
+ dev->wiphy->perm_addr, priv->version,
+ p54_rf_chips[priv->rxhw]);
return 0;
@@ -719,8 +714,7 @@
priv->output_limit = NULL;
priv->curve_data = NULL;
- printk(KERN_ERR "%s: eeprom parse failed!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "eeprom parse failed!\n");
return err;
}
EXPORT_SYMBOL_GPL(p54_parse_eeprom);