arch/arm/boot/dts/spear600.dtsi

/*
 * Copyright 2012 Stefan Roese <sr@denx.de>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	compatible = "st,spear600";

	cpus {
		cpu@0 {
			compatible = "arm,arm926ejs";
		};
	};

	memory {
		device_type = "memory";
		reg = <0 0x40000000>;
	};

	ahb {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges = <0xd0000000 0xd0000000 0x30000000>;

		vic0: interrupt-controller@f1100000 {
			compatible = "arm,pl190-vic";
			interrupt-controller;
			reg = <0xf1100000 0x1000>;
			#interrupt-cells = <1>;
		};

		vic1: interrupt-controller@f1000000 {
			compatible = "arm,pl190-vic";
			interrupt-controller;
			reg = <0xf1000000 0x1000>;
			#interrupt-cells = <1>;
		};

		gmac: ethernet@e0800000 {
			compatible = "st,spear600-gmac";
			reg = <0xe0800000 0x8000>;
			interrupt-parent = <&vic1>;
			interrupts = <24 23>;
			interrupt-names = "macirq", "eth_wake_irq";
			status = "disabled";
		};

		fsmc: flash@d1800000 {
			compatible = "st,spear600-fsmc-nand";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0xd1800000 0x1000	/* FSMC Register */
			       0xd2000000 0x4000>;	/* NAND Base */
			reg-names = "fsmc_regs", "nand_data";
			st,ale-off = <0x20000>;
			st,cle-off = <0x10000>;
			status = "disabled";
		};

		smi: flash@fc000000 {
			compatible = "st,spear600-smi";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0xfc000000 0x1000>;
			interrupt-parent = <&vic1>;
			interrupts = <12>;
			status = "disabled";
		};

		ehci@e1800000 {
			compatible = "st,spear600-ehci", "usb-ehci";
			reg = <0xe1800000 0x1000>;
			interrupt-parent = <&vic1>;
			interrupts = <27>;
			status = "disabled";
		};

		ehci@e2000000 {
			compatible = "st,spear600-ehci", "usb-ehci";
			reg = <0xe2000000 0x1000>;
			interrupt-parent = <&vic1>;
			interrupts = <29>;
			status = "disabled";
		};

		ohci@e1900000 {
			compatible = "st,spear600-ohci", "usb-ohci";
			reg = <0xe1900000 0x1000>;
			interrupt-parent = <&vic1>;
			interrupts = <26>;
			status = "disabled";
		};

		ohci@e2100000 {
			compatible = "st,spear600-ohci", "usb-ohci";
			reg = <0xe2100000 0x1000>;
			interrupt-parent = <&vic1>;
			interrupts = <28>;
			status = "disabled";
		};

		apb {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "simple-bus";
			ranges = <0xd0000000 0xd0000000 0x30000000>;

			serial@d0000000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0xd0000000 0x1000>;
				interrupt-parent = <&vic0>;
				interrupts = <24>;
				status = "disabled";
			};

			serial@d0080000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0xd0080000 0x1000>;
				interrupt-parent = <&vic0>;
				interrupts = <25>;
				status = "disabled";
			};

			/* local/cpu GPIO */
			gpio0: gpio@f0100000 {
				#gpio-cells = <2>;
				compatible = "arm,pl061", "arm,primecell";
				gpio-controller;
				reg = <0xf0100000 0x1000>;
				interrupt-parent = <&vic0>;
				interrupts = <18>;
			};

			/* basic GPIO */
			gpio1: gpio@fc980000 {
				#gpio-cells = <2>;
				compatible = "arm,pl061", "arm,primecell";
				gpio-controller;
				reg = <0xfc980000 0x1000>;
				interrupt-parent = <&vic1>;
				interrupts = <19>;
			};

			/* appl GPIO */
			gpio2: gpio@d8100000 {
				#gpio-cells = <2>;
				compatible = "arm,pl061", "arm,primecell";
				gpio-controller;
				reg = <0xd8100000 0x1000>;
				interrupt-parent = <&vic1>;
				interrupts = <4>;
			};

			i2c@d0200000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0xd0200000 0x1000>;
				interrupt-parent = <&vic0>;
				interrupts = <28>;
				status = "disabled";
			};
		};
	};
};