drivers/scsi/sim710.c

/*
 * sim710.c - Copyright (C) 1999 Richard Hirst <richard@sleepie.demon.co.uk>
 *
 *----------------------------------------------------------------------------
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *----------------------------------------------------------------------------
 *
 * MCA card detection code by Trent McNair.
 * Fixes to not explicitly nul bss data from Xavier Bestel.
 * Some multiboard fixes from Rolf Eike Beer.
 * Auto probing of EISA config space from Trevor Hemsley.
 *
 * Rewritten to use 53c700.c by James.Bottomley@SteelEye.com
 *
 */

#include <linux/config.h>
#include <linux/module.h>

#include <linux/blkdev.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/mca.h>
#include <linux/eisa.h>
#include <linux/interrupt.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>

#include "53c700.h"


/* Must be enough for both EISA and MCA */
#define MAX_SLOTS 8
static __u8 __initdata id_array[MAX_SLOTS] = { [0 ... MAX_SLOTS-1] = 7 };

static char *sim710;		/* command line passed by insmod */

MODULE_AUTHOR("Richard Hirst");
MODULE_DESCRIPTION("Simple NCR53C710 driver");
MODULE_LICENSE("GPL");

module_param(sim710, charp, 0);

#ifdef MODULE
#define ARG_SEP ' '
#else
#define ARG_SEP ','
#endif

static __init int
param_setup(char *str)
{
	char *pos = str, *next;
	int slot = -1;

	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
		int val = (int)simple_strtoul(++next, NULL, 0);

		if(!strncmp(pos, "slot:", 5))
			slot = val;
		else if(!strncmp(pos, "id:", 3)) {
			if(slot == -1) {
				printk(KERN_WARNING "sim710: Must specify slot for id parameter\n");
			} else if(slot >= MAX_SLOTS) {
				printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val);
			} else {
				id_array[slot] = val;
			}
		}
		if((pos = strchr(pos, ARG_SEP)) != NULL)
			pos++;
	}
	return 1;
}
__setup("sim710=", param_setup);

static struct scsi_host_template sim710_driver_template = {
	.name			= "LSI (Symbios) 710 MCA/EISA",
	.proc_name		= "sim710",
	.this_id		= 7,
	.module			= THIS_MODULE,
};

static __devinit int
sim710_probe_common(struct device *dev, unsigned long base_addr,
		    int irq, int clock, int differential, int scsi_id)
{
	struct Scsi_Host * host = NULL;
	struct NCR_700_Host_Parameters *hostdata =
		kmalloc(sizeof(struct NCR_700_Host_Parameters),	GFP_KERNEL);

	printk(KERN_NOTICE "sim710: %s\n", dev->bus_id);
	printk(KERN_NOTICE "sim710: irq = %d, clock = %d, base = 0x%lx, scsi_id = %d\n",
	       irq, clock, base_addr, scsi_id);

	if(hostdata == NULL) {
		printk(KERN_ERR "sim710: Failed to allocate host data\n");
		goto out;
	}
	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));

	if(request_region(base_addr, 64, "sim710") == NULL) {
		printk(KERN_ERR "sim710: Failed to reserve IO region 0x%lx\n",
		       base_addr);
		goto out_free;
	}

	/* Fill in the three required pieces of hostdata */
	hostdata->base = ioport_map(base_addr, 64);
	hostdata->differential = differential;
	hostdata->clock = clock;
	hostdata->chip710 = 1;

	/* and register the chip */
	if((host = NCR_700_detect(&sim710_driver_template, hostdata, dev))
	   == NULL) {
		printk(KERN_ERR "sim710: No host detected; card configuration problem?\n");
		goto out_release;
	}
	host->this_id = scsi_id;
	host->base = base_addr;
	host->irq = irq;
	if (request_irq(irq, NCR_700_intr, SA_SHIRQ, "sim710", host)) {
		printk(KERN_ERR "sim710: request_irq failed\n");
		goto out_put_host;
	}

	scsi_scan_host(host);

	return 0;

 out_put_host:
	scsi_host_put(host);
 out_release:
	release_region(base_addr, 64);
 out_free:
	kfree(hostdata);
 out:
	return -ENODEV;
}

static __devexit int
sim710_device_remove(struct device *dev)
{
	struct Scsi_Host *host = dev_to_shost(dev);
	struct NCR_700_Host_Parameters *hostdata =
		(struct NCR_700_Host_Parameters *)host->hostdata[0];

	scsi_remove_host(host);
	NCR_700_release(host);
	kfree(hostdata);
	free_irq(host->irq, host);
	release_region(host->base, 64);
	return 0;
}

#ifdef CONFIG_MCA

/* CARD ID 01BB and 01BA use the same pos values */
#define MCA_01BB_IO_PORTS { 0x0000, 0x0000, 0x0800, 0x0C00, 0x1000, 0x1400, \
			    0x1800, 0x1C00, 0x2000, 0x2400, 0x2800, \
			    0x2C00, 0x3000, 0x3400, 0x3800, 0x3C00, \
			    0x4000, 0x4400, 0x4800, 0x4C00, 0x5000  }

#define MCA_01BB_IRQS { 3, 5, 11, 14 }

/* CARD ID 004f */
#define MCA_004F_IO_PORTS { 0x0000, 0x0200, 0x0300, 0x0400, 0x0500,  0x0600 }
#define MCA_004F_IRQS { 5, 9, 14 }

static short sim710_mca_id_table[] = { 0x01bb, 0x01ba, 0x004f, 0};

static __init int
sim710_mca_probe(struct device *dev)
{
	struct mca_device *mca_dev = to_mca_device(dev);
	int slot = mca_dev->slot;
	int pos[3];
	unsigned int base;
	int irq_vector;
	short id = sim710_mca_id_table[mca_dev->index];
	static int io_004f_by_pos[] = MCA_004F_IO_PORTS;
	static int irq_004f_by_pos[] = MCA_004F_IRQS;
	static int io_01bb_by_pos[] = MCA_01BB_IO_PORTS;
	static int irq_01bb_by_pos[] = MCA_01BB_IRQS;
	char *name;
	int clock;

	pos[0] = mca_device_read_stored_pos(mca_dev, 2);
	pos[1] = mca_device_read_stored_pos(mca_dev, 3);
	pos[2] = mca_device_read_stored_pos(mca_dev, 4);

	/*
	 * 01BB & 01BA port base by bits 7,6,5,4,3,2 in pos[2]
	 *
	 *    000000  <disabled>   001010  0x2800
	 *    000001  <invalid>    001011  0x2C00
	 *    000010  0x0800       001100  0x3000
	 *    000011  0x0C00       001101  0x3400
	 *    000100  0x1000       001110  0x3800
	 *    000101  0x1400       001111  0x3C00
	 *    000110  0x1800       010000  0x4000
	 *    000111  0x1C00       010001  0x4400
	 *    001000  0x2000       010010  0x4800
	 *    001001  0x2400       010011  0x4C00
	 *                         010100  0x5000
	 *
	 * 00F4 port base by bits 3,2,1 in pos[0]
	 *
	 *    000  <disabled>      001    0x200
	 *    010  0x300           011    0x400
	 *    100  0x500           101    0x600
	 *
	 * 01BB & 01BA IRQ is specified in pos[0] bits 7 and 6:
	 *
	 *    00   3               10   11
	 *    01   5               11   14
	 *
	 * 00F4 IRQ specified by bits 6,5,4 in pos[0]
	 *
	 *    100   5              101    9
	 *    110   14
	 */

	if (id == 0x01bb || id == 0x01ba) {
		base = io_01bb_by_pos[(pos[2] & 0xFC) >> 2];
		irq_vector =
			irq_01bb_by_pos[((pos[0] & 0xC0) >> 6)];

		clock = 50;
		if (id == 0x01bb)
			name = "NCR 3360/3430 SCSI SubSystem";
		else
			name = "NCR Dual SIOP SCSI Host Adapter Board";
	} else if ( id == 0x004f ) {
		base = io_004f_by_pos[((pos[0] & 0x0E) >> 1)];
		irq_vector =
			irq_004f_by_pos[((pos[0] & 0x70) >> 4) - 4];
		clock = 50;
		name = "NCR 53c710 SCSI Host Adapter Board";
	} else {
		return -ENODEV;
	}
	mca_device_set_name(mca_dev, name);
	mca_device_set_claim(mca_dev, 1);
	base = mca_device_transform_ioport(mca_dev, base);
	irq_vector = mca_device_transform_irq(mca_dev, irq_vector);

	return sim710_probe_common(dev, base, irq_vector, clock,
				   0, id_array[slot]);
}

static struct mca_driver sim710_mca_driver = {
	.id_table		= sim710_mca_id_table,
	.driver = {
		.name		= "sim710",
		.bus		= &mca_bus_type,
		.probe		= sim710_mca_probe,
		.remove		= __devexit_p(sim710_device_remove),
	},
};

#endif /* CONFIG_MCA */

#ifdef CONFIG_EISA
static struct eisa_device_id sim710_eisa_ids[] = {
	{ "CPQ4410" },
	{ "CPQ4411" },
	{ "HWP0C80" },
	{ "" }
};

static __init int
sim710_eisa_probe(struct device *dev)
{
	struct eisa_device *edev = to_eisa_device(dev);
	unsigned long io_addr = edev->base_addr;
	char eisa_cpq_irqs[] = { 11, 14, 15, 10, 9, 0 };
	char eisa_hwp_irqs[] = { 3, 4, 5, 7, 12, 10, 11, 0};
	char *eisa_irqs;
	unsigned char irq_index;
	unsigned char irq, differential = 0, scsi_id = 7;

	if(strcmp(edev->id.sig, "HWP0C80") == 0) {
		__u8 val;
		eisa_irqs =  eisa_hwp_irqs;
		irq_index = (inb(io_addr + 0xc85) & 0x7) - 1;

		val = inb(io_addr + 0x4);
		scsi_id = ffs(val) - 1;

		if(scsi_id > 7 || (val & ~(1<<scsi_id)) != 0) {
			printk(KERN_ERR "sim710.c, EISA card %s has incorrect scsi_id, setting to 7\n", dev->bus_id);
			scsi_id = 7;
		}
	} else {
		eisa_irqs = eisa_cpq_irqs;
		irq_index = inb(io_addr + 0xc88) & 0x07;
	}

	if(irq_index >= strlen(eisa_irqs)) {
		printk("sim710.c: irq nasty\n");
		return -ENODEV;
	}

	irq = eisa_irqs[irq_index];
		
	return sim710_probe_common(dev, io_addr, irq, 50,
				   differential, scsi_id);
}

static struct eisa_driver sim710_eisa_driver = {
	.id_table		= sim710_eisa_ids,
	.driver = {
		.name		= "sim710",
		.probe		= sim710_eisa_probe,
		.remove		= __devexit_p(sim710_device_remove),
	},
};
#endif /* CONFIG_EISA */

static int __init sim710_init(void)
{
	int err = -ENODEV;

#ifdef MODULE
	if (sim710)
		param_setup(sim710);
#endif

#ifdef CONFIG_MCA
	err = mca_register_driver(&sim710_mca_driver);
#endif

#ifdef CONFIG_EISA
	err = eisa_driver_register(&sim710_eisa_driver);
#endif
	/* FIXME: what we'd really like to return here is -ENODEV if
	 * no devices have actually been found.  Instead, the err
	 * above actually only reports problems with kobject_register,
	 * so for the moment return success */

	return 0;
}

static void __exit sim710_exit(void)
{
#ifdef CONFIG_MCA
	if (MCA_bus)
		mca_unregister_driver(&sim710_mca_driver);
#endif

#ifdef CONFIG_EISA
	eisa_driver_unregister(&sim710_eisa_driver);
#endif
}

module_init(sim710_init);
module_exit(sim710_exit);