[ALSA] emu10k1: Update registers defines for the Audigy 2/emu10k2.5
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
index 32ce4bd..adca71b 100644
--- a/include/sound/emu10k1.h
+++ b/include/sound/emu10k1.h
@@ -460,6 +460,7 @@
#define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */
#define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */
+#define A_HR 0x0b /* High Resolution. 24bit playback from host to DSP. */
#define MAPA 0x0c /* Cache map A */
#define MAPB 0x0d /* Cache map B */
@@ -467,6 +468,8 @@
#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
+/* 0x0e, 0x0f: Not used */
+
#define ENVVOL 0x10 /* Volume envelope register */
#define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */
/* 0x8000-n == 666*n usec delay */
@@ -555,7 +558,7 @@
/* NOTE: All channels contain internal variables; do */
/* not write to these locations. */
-/* 1f something */
+/* 0x1f: not used */
#define CD0 0x20 /* Cache data 0 register */
#define CD1 0x21 /* Cache data 1 register */
@@ -625,6 +628,8 @@
#define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */
#define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */
+#define A_TBLSZ ` 0x43 /* Effects Tank Internal Table Size. Only low byte or register used */
+
#define TCBS 0x44 /* Tank cache buffer size register */
#define TCBS_MASK 0x00000007 /* Tank cache buffer size field */
#define TCBS_BUFFSIZE_16K 0x00000000
@@ -645,7 +650,7 @@
#define FXBA 0x47 /* FX Buffer Address */
#define FXBA_MASK 0xfffff000 /* 20 bit base address */
-/* 0x48 something - word access, defaults to 3f */
+#define A_HWM 0x48 /* High PCI Water Mark - word access, defaults to 3f */
#define MICBS 0x49 /* Microphone buffer size register */
@@ -689,6 +694,18 @@
#define ADCBS_BUFSIZE_57344 0x0000001e
#define ADCBS_BUFSIZE_65536 0x0000001f
+/* Current Send B, A Amounts */
+#define A_CSBA 0x4c
+
+/* Current Send D, C Amounts */
+#define A_CSDC 0x4d
+
+/* Current Send F, E Amounts */
+#define A_CSFE 0x4e
+
+/* Current Send H, G Amounts */
+#define A_CSHG 0x4f
+
#define CDCS 0x50 /* CD-ROM digital channel status register */
@@ -696,6 +713,9 @@
#define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+/* S/PDIF Input C Channel Status */
+#define A_SPSC 0x52
+
#define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
#define A_DBG 0x53
@@ -736,6 +756,8 @@
#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */
#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */
+/* 0x57: Not used */
+
/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */
#define CLIEL 0x58 /* Channel loop interrupt enable low register */
@@ -761,6 +783,9 @@
#define AC97SLOT_CNTR 0x10 /* Center enable */
#define AC97SLOT_LFE 0x20 /* LFE enable */
+/* PCB Revision */
+#define A_PCB 0x5f
+
// NOTE: 0x60,61,62: 64-bit
#define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */
@@ -808,9 +833,18 @@
#define HLIPH 0x69 /* Channel half loop interrupt pending high register */
-// 0x6a,6b,6c used for some recording
-// 0x6d unused
-// 0x6e,6f - tanktable base / offset
+/* S/PDIF Host Record Index (bypasses SRC) */
+#define A_SPRI 0x6a
+/* S/PDIF Host Record Address */
+#define A_SPRA 0x6b
+/* S/PDIF Host Record Control */
+#define A_SPRC 0x6c
+/* Delayed Interrupt Counter & Enable */
+#define A_DICE 0x6d
+/* Tank Table Base */
+#define A_TTB 0x6e
+/* Tank Delay Offset */
+#define A_TDOF 0x6f
/* This is the MPU port on the card (via the game port) */
#define A_MUDATA1 0x70
@@ -828,6 +862,7 @@
#define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */
#define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */
+/* Extended Hardware Control */
#define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */
#define A_SAMPLE_RATE 0x76 /* Various sample rate settings. */
#define A_SAMPLE_RATE_NOT_USED 0x0ffc111e /* Bits that are not used and cannot be set. */
@@ -850,8 +885,20 @@
#define A_PCM_96000 0x00004000
#define A_PCM_44100 0x00008000
-/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */
-/* 0x7a, 0x7b - lookup tables */
+/* I2S0 Sample Rate Tracker Status */
+#define A_SRT3 0x77
+
+/* I2S1 Sample Rate Tracker Status */
+#define A_SRT4 0x78
+
+/* I2S2 Sample Rate Tracker Status */
+#define A_SRT5 0x79
+/* - default to 0x01080000 on my audigy 2 ZS --rlrevell */
+
+/* Tank Table DMA Address */
+#define A_TTDA 0x7a
+/* Tank Table DMA Data */
+#define A_TTDD 0x7b
#define A_FXRT2 0x7c
#define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */
@@ -873,7 +920,7 @@
#define A_FXRT_CHANNELC 0x003f0000
#define A_FXRT_CHANNELD 0x3f000000
-
+/* 0x7f: Not used */
/* Each FX general purpose register is 32 bits in length, all bits are used */
#define FXGPREGBASE 0x100 /* FX general purpose registers base */
#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */