pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (char)
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG. Only some rare extra debug checks
in cm4000_cs.c cm4040_cs.c are now hidden behind a "#ifdef CM4000_DEBUG"
or "#ifdef CM4040_DEBUG".
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: Harald Welte <laforge@gnumonks.org>
CC: Jiri Kosina <jkosina@suse.cz>
CC: David Sterba <dsterba@suse.cz>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index c250a31..1611c4f 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -23,8 +23,6 @@
* All rights reserved. Licensed under dual BSD/GPL license.
*/
-/* #define PCMCIA_DEBUG 6 */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -47,18 +45,17 @@
/* #define ATR_CSUM */
-#ifdef PCMCIA_DEBUG
#define reader_to_dev(x) (&handle_to_dev(x->p_dev))
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0600);
-#define DEBUGP(n, rdr, x, args...) do { \
- if (pc_debug >= (n)) \
- dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, \
- __func__ , ## args); \
+
+/* n (debug level) is ignored */
+/* additional debug output may be enabled by re-compiling with
+ * CM4000_DEBUG set */
+/* #define CM4000_DEBUG */
+#define DEBUGP(n, rdr, x, args...) do { \
+ dev_dbg(reader_to_dev(rdr), "%s:" x, \
+ __func__ , ## args); \
} while (0)
-#else
-#define DEBUGP(n, rdr, x, args...)
-#endif
+
static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
#define T_1SEC (HZ)
@@ -174,14 +171,13 @@
/* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9}
};
-#ifndef PCMCIA_DEBUG
+#ifndef CM4000_DEBUG
#define xoutb outb
#define xinb inb
#else
static inline void xoutb(unsigned char val, unsigned short port)
{
- if (pc_debug >= 7)
- printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port);
+ pr_debug("outb(val=%.2x,port=%.4x)\n", val, port);
outb(val, port);
}
static inline unsigned char xinb(unsigned short port)
@@ -189,8 +185,7 @@
unsigned char val;
val = inb(port);
- if (pc_debug >= 7)
- printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port);
+ pr_debug("%.2x=inb(%.4x)\n", val, port);
return val;
}
@@ -514,12 +509,10 @@
for (i = 0; i < 4; i++) {
xoutb(i, REG_BUF_ADDR(iobase));
xoutb(dev->pts[i], REG_BUF_DATA(iobase)); /* buf data */
-#ifdef PCMCIA_DEBUG
- if (pc_debug >= 5)
- printk("0x%.2x ", dev->pts[i]);
+#ifdef CM4000_DEBUG
+ pr_debug("0x%.2x ", dev->pts[i]);
}
- if (pc_debug >= 5)
- printk("\n");
+ pr_debug("\n");
#else
}
#endif
@@ -579,14 +572,13 @@
pts_reply[i] = inb(REG_BUF_DATA(iobase));
}
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
DEBUGP(2, dev, "PTSreply: ");
for (i = 0; i < num_bytes_read; i++) {
- if (pc_debug >= 5)
- printk("0x%.2x ", pts_reply[i]);
+ pr_debug("0x%.2x ", pts_reply[i]);
}
- printk("\n");
-#endif /* PCMCIA_DEBUG */
+ pr_debug("\n");
+#endif /* CM4000_DEBUG */
DEBUGP(5, dev, "Clear Tactive in Flags1\n");
xoutb(0x20, REG_FLAGS1(iobase));
@@ -655,7 +647,7 @@
DEBUGP(5, dev, "Delete timer\n");
del_timer_sync(&dev->timer);
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
dev->monitor_running = 0;
#endif
@@ -898,7 +890,7 @@
DEBUGP(4, dev, "ATR checksum (0x%.2x, should "
"be zero) failed\n", dev->atr_csum);
}
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
else if (test_bit(IS_BAD_LENGTH, &dev->flags)) {
DEBUGP(4, dev, "ATR length error\n");
} else {
@@ -1415,7 +1407,7 @@
int size;
int rc;
void __user *argp = (void __user *)arg;
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
char *ioctl_names[CM_IOC_MAXNR + 1] = {
[_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS",
[_IOC_NR(CM_IOCGATR)] "CM_IOCGATR",
@@ -1423,9 +1415,9 @@
[_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS",
[_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL",
};
-#endif
DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode),
iminor(inode), ioctl_names[_IOC_NR(cmd)]);
+#endif
lock_kernel();
rc = -ENODEV;
@@ -1523,7 +1515,7 @@
}
case CM_IOCARDOFF:
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
DEBUGP(4, dev, "... in CM_IOCARDOFF\n");
if (dev->flags0 & 0x01) {
DEBUGP(4, dev, " Card inserted\n");
@@ -1625,18 +1617,9 @@
}
break;
-#ifdef PCMCIA_DEBUG
- case CM_IOSDBGLVL: /* set debug log level */
- {
- int old_pc_debug = 0;
-
- old_pc_debug = pc_debug;
- if (copy_from_user(&pc_debug, argp, sizeof(int)))
- rc = -EFAULT;
- else if (old_pc_debug != pc_debug)
- DEBUGP(0, dev, "Changed debug log level "
- "to %i\n", pc_debug);
- }
+#ifdef CM4000_DEBUG
+ case CM_IOSDBGLVL:
+ rc = -ENOTTY;
break;
#endif
default: