| /* |
| * linux/arch/arm/common/amba.c |
| * |
| * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/amba/bus.h> |
| |
| #include <asm/irq.h> |
| #include <asm/sizes.h> |
| |
| #define to_amba_device(d) container_of(d, struct amba_device, dev) |
| #define to_amba_driver(d) container_of(d, struct amba_driver, drv) |
| |
| static struct amba_id * |
| amba_lookup(struct amba_id *table, struct amba_device *dev) |
| { |
| int ret = 0; |
| |
| while (table->mask) { |
| ret = (dev->periphid & table->mask) == table->id; |
| if (ret) |
| break; |
| table++; |
| } |
| |
| return ret ? table : NULL; |
| } |
| |
| static int amba_match(struct device *dev, struct device_driver *drv) |
| { |
| struct amba_device *pcdev = to_amba_device(dev); |
| struct amba_driver *pcdrv = to_amba_driver(drv); |
| |
| return amba_lookup(pcdrv->id_table, pcdev) != NULL; |
| } |
| |
| #ifdef CONFIG_HOTPLUG |
| static int amba_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| struct amba_device *pcdev = to_amba_device(dev); |
| int retval = 0; |
| |
| retval = add_uevent_var(env, "AMBA_ID=%08x", pcdev->periphid); |
| return retval; |
| } |
| #else |
| #define amba_uevent NULL |
| #endif |
| |
| static int amba_suspend(struct device *dev, pm_message_t state) |
| { |
| struct amba_driver *drv = to_amba_driver(dev->driver); |
| int ret = 0; |
| |
| if (dev->driver && drv->suspend) |
| ret = drv->suspend(to_amba_device(dev), state); |
| return ret; |
| } |
| |
| static int amba_resume(struct device *dev) |
| { |
| struct amba_driver *drv = to_amba_driver(dev->driver); |
| int ret = 0; |
| |
| if (dev->driver && drv->resume) |
| ret = drv->resume(to_amba_device(dev)); |
| return ret; |
| } |
| |
| #define amba_attr_func(name,fmt,arg...) \ |
| static ssize_t name##_show(struct device *_dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct amba_device *dev = to_amba_device(_dev); \ |
| return sprintf(buf, fmt, arg); \ |
| } |
| |
| #define amba_attr(name,fmt,arg...) \ |
| amba_attr_func(name,fmt,arg) \ |
| static DEVICE_ATTR(name, S_IRUGO, name##_show, NULL) |
| |
| amba_attr_func(id, "%08x\n", dev->periphid); |
| amba_attr(irq0, "%u\n", dev->irq[0]); |
| amba_attr(irq1, "%u\n", dev->irq[1]); |
| amba_attr_func(resource, "\t%016llx\t%016llx\t%016lx\n", |
| (unsigned long long)dev->res.start, (unsigned long long)dev->res.end, |
| dev->res.flags); |
| |
| static struct device_attribute amba_dev_attrs[] = { |
| __ATTR_RO(id), |
| __ATTR_RO(resource), |
| __ATTR_NULL, |
| }; |
| |
| /* |
| * Primecells are part of the Advanced Microcontroller Bus Architecture, |
| * so we call the bus "amba". |
| */ |
| static struct bus_type amba_bustype = { |
| .name = "amba", |
| .dev_attrs = amba_dev_attrs, |
| .match = amba_match, |
| .uevent = amba_uevent, |
| .suspend = amba_suspend, |
| .resume = amba_resume, |
| }; |
| |
| static int __init amba_init(void) |
| { |
| return bus_register(&amba_bustype); |
| } |
| |
| postcore_initcall(amba_init); |
| |
| /* |
| * These are the device model conversion veneers; they convert the |
| * device model structures to our more specific structures. |
| */ |
| static int amba_probe(struct device *dev) |
| { |
| struct amba_device *pcdev = to_amba_device(dev); |
| struct amba_driver *pcdrv = to_amba_driver(dev->driver); |
| struct amba_id *id; |
| |
| id = amba_lookup(pcdrv->id_table, pcdev); |
| |
| return pcdrv->probe(pcdev, id); |
| } |
| |
| static int amba_remove(struct device *dev) |
| { |
| struct amba_driver *drv = to_amba_driver(dev->driver); |
| return drv->remove(to_amba_device(dev)); |
| } |
| |
| static void amba_shutdown(struct device *dev) |
| { |
| struct amba_driver *drv = to_amba_driver(dev->driver); |
| drv->shutdown(to_amba_device(dev)); |
| } |
| |
| /** |
| * amba_driver_register - register an AMBA device driver |
| * @drv: amba device driver structure |
| * |
| * Register an AMBA device driver with the Linux device model |
| * core. If devices pre-exist, the drivers probe function will |
| * be called. |
| */ |
| int amba_driver_register(struct amba_driver *drv) |
| { |
| drv->drv.bus = &amba_bustype; |
| |
| #define SETFN(fn) if (drv->fn) drv->drv.fn = amba_##fn |
| SETFN(probe); |
| SETFN(remove); |
| SETFN(shutdown); |
| |
| return driver_register(&drv->drv); |
| } |
| |
| /** |
| * amba_driver_unregister - remove an AMBA device driver |
| * @drv: AMBA device driver structure to remove |
| * |
| * Unregister an AMBA device driver from the Linux device |
| * model. The device model will call the drivers remove function |
| * for each device the device driver is currently handling. |
| */ |
| void amba_driver_unregister(struct amba_driver *drv) |
| { |
| driver_unregister(&drv->drv); |
| } |
| |
| |
| static void amba_device_release(struct device *dev) |
| { |
| struct amba_device *d = to_amba_device(dev); |
| |
| if (d->res.parent) |
| release_resource(&d->res); |
| kfree(d); |
| } |
| |
| /** |
| * amba_device_register - register an AMBA device |
| * @dev: AMBA device to register |
| * @parent: parent memory resource |
| * |
| * Setup the AMBA device, reading the cell ID if present. |
| * Claim the resource, and register the AMBA device with |
| * the Linux device manager. |
| */ |
| int amba_device_register(struct amba_device *dev, struct resource *parent) |
| { |
| u32 pid, cid; |
| u32 size; |
| void __iomem *tmp; |
| int i, ret; |
| |
| device_initialize(&dev->dev); |
| |
| /* |
| * Copy from device_add |
| */ |
| if (dev->dev.init_name) { |
| dev_set_name(&dev->dev, "%s", dev->dev.init_name); |
| dev->dev.init_name = NULL; |
| } |
| |
| dev->dev.release = amba_device_release; |
| dev->dev.bus = &amba_bustype; |
| dev->dev.dma_mask = &dev->dma_mask; |
| dev->res.name = dev_name(&dev->dev); |
| |
| if (!dev->dev.coherent_dma_mask && dev->dma_mask) |
| dev_warn(&dev->dev, "coherent dma mask is unset\n"); |
| |
| ret = request_resource(parent, &dev->res); |
| if (ret) |
| goto err_out; |
| |
| /* |
| * Dynamically calculate the size of the resource |
| * and use this for iomap |
| */ |
| size = resource_size(&dev->res); |
| tmp = ioremap(dev->res.start, size); |
| if (!tmp) { |
| ret = -ENOMEM; |
| goto err_release; |
| } |
| |
| /* |
| * Read pid and cid based on size of resource |
| * they are located at end of region |
| */ |
| for (pid = 0, i = 0; i < 4; i++) |
| pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8); |
| for (cid = 0, i = 0; i < 4; i++) |
| cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8); |
| |
| iounmap(tmp); |
| |
| if (cid == 0xb105f00d) |
| dev->periphid = pid; |
| |
| if (!dev->periphid) { |
| ret = -ENODEV; |
| goto err_release; |
| } |
| |
| ret = device_add(&dev->dev); |
| if (ret) |
| goto err_release; |
| |
| if (dev->irq[0] != NO_IRQ) |
| ret = device_create_file(&dev->dev, &dev_attr_irq0); |
| if (ret == 0 && dev->irq[1] != NO_IRQ) |
| ret = device_create_file(&dev->dev, &dev_attr_irq1); |
| if (ret == 0) |
| return ret; |
| |
| device_unregister(&dev->dev); |
| |
| err_release: |
| release_resource(&dev->res); |
| err_out: |
| return ret; |
| } |
| |
| /** |
| * amba_device_unregister - unregister an AMBA device |
| * @dev: AMBA device to remove |
| * |
| * Remove the specified AMBA device from the Linux device |
| * manager. All files associated with this object will be |
| * destroyed, and device drivers notified that the device has |
| * been removed. The AMBA device's resources including |
| * the amba_device structure will be freed once all |
| * references to it have been dropped. |
| */ |
| void amba_device_unregister(struct amba_device *dev) |
| { |
| device_unregister(&dev->dev); |
| } |
| |
| |
| struct find_data { |
| struct amba_device *dev; |
| struct device *parent; |
| const char *busid; |
| unsigned int id; |
| unsigned int mask; |
| }; |
| |
| static int amba_find_match(struct device *dev, void *data) |
| { |
| struct find_data *d = data; |
| struct amba_device *pcdev = to_amba_device(dev); |
| int r; |
| |
| r = (pcdev->periphid & d->mask) == d->id; |
| if (d->parent) |
| r &= d->parent == dev->parent; |
| if (d->busid) |
| r &= strcmp(dev_name(dev), d->busid) == 0; |
| |
| if (r) { |
| get_device(dev); |
| d->dev = pcdev; |
| } |
| |
| return r; |
| } |
| |
| /** |
| * amba_find_device - locate an AMBA device given a bus id |
| * @busid: bus id for device (or NULL) |
| * @parent: parent device (or NULL) |
| * @id: peripheral ID (or 0) |
| * @mask: peripheral ID mask (or 0) |
| * |
| * Return the AMBA device corresponding to the supplied parameters. |
| * If no device matches, returns NULL. |
| * |
| * NOTE: When a valid device is found, its refcount is |
| * incremented, and must be decremented before the returned |
| * reference. |
| */ |
| struct amba_device * |
| amba_find_device(const char *busid, struct device *parent, unsigned int id, |
| unsigned int mask) |
| { |
| struct find_data data; |
| |
| data.dev = NULL; |
| data.parent = parent; |
| data.busid = busid; |
| data.id = id; |
| data.mask = mask; |
| |
| bus_for_each_dev(&amba_bustype, NULL, &data, amba_find_match); |
| |
| return data.dev; |
| } |
| |
| /** |
| * amba_request_regions - request all mem regions associated with device |
| * @dev: amba_device structure for device |
| * @name: name, or NULL to use driver name |
| */ |
| int amba_request_regions(struct amba_device *dev, const char *name) |
| { |
| int ret = 0; |
| u32 size; |
| |
| if (!name) |
| name = dev->dev.driver->name; |
| |
| size = resource_size(&dev->res); |
| |
| if (!request_mem_region(dev->res.start, size, name)) |
| ret = -EBUSY; |
| |
| return ret; |
| } |
| |
| /** |
| * amba_release_regions - release mem regions assoicated with device |
| * @dev: amba_device structure for device |
| * |
| * Release regions claimed by a successful call to amba_request_regions. |
| */ |
| void amba_release_regions(struct amba_device *dev) |
| { |
| u32 size; |
| |
| size = resource_size(&dev->res); |
| release_mem_region(dev->res.start, size); |
| } |
| |
| EXPORT_SYMBOL(amba_driver_register); |
| EXPORT_SYMBOL(amba_driver_unregister); |
| EXPORT_SYMBOL(amba_device_register); |
| EXPORT_SYMBOL(amba_device_unregister); |
| EXPORT_SYMBOL(amba_find_device); |
| EXPORT_SYMBOL(amba_request_regions); |
| EXPORT_SYMBOL(amba_release_regions); |