ARM: OMAP3: Add minimal omap3430 support
Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.
Also do following changes that make 34xx support usable:
- Remove unused sram.c functions for 34xx
- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
in entry-macro.S
- Update mach-omap2/io.c to support 2420, 2430, and 34xx
- Also merge in 34xx GPMC changes to add fields wr_access and
wr_data_mux_bus from Adrian Hunter
- Remove memory initialization call omap2_init_memory() until
until more generic memory initialization patches are posted.
It's OK to rely on bootloader initialization until then.
Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 703a44f..552ea6d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -118,6 +118,7 @@
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
+ machine-$(CONFIG_ARCH_OMAP3) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 7069c9d..e2481e4 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,8 +15,17 @@
bool "OMAP2430 support"
depends on ARCH_OMAP24XX
+config ARCH_OMAP34XX
+ bool "OMAP34xx Based System"
+ depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+ bool "OMAP3430 support"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select ARCH_OMAP_OTG
+
comment "OMAP Board Type"
- depends on ARCH_OMAP2
+ depends on ARCH_OMAP2 || ARCH_OMAP3
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 800639e..0dc40db 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,6 +12,7 @@
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
+obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# Power Management
ifeq ($(CONFIG_PM),y)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 149bfba..375ad27 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -220,6 +220,11 @@
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+ if (cpu_is_omap34xx()) {
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+ }
+
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
*/
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 03c6ab1..71a9de3 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -43,7 +43,9 @@
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
-static struct map_desc omap2_io_desc[] __initdata = {
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
@@ -51,25 +53,15 @@
.type = MT_DEVICE
},
{
- .virtual = L4_24XX_VIRT,
- .pfn = __phys_to_pfn(L4_24XX_PHYS),
- .length = L4_24XX_SIZE,
- .type = MT_DEVICE
- },
-#ifdef CONFIG_ARCH_OMAP2430
- {
- .virtual = L4_WK_243X_VIRT,
- .pfn = __phys_to_pfn(L4_WK_243X_PHYS),
- .length = L4_WK_243X_SIZE,
+ .virtual = L4_24XX_VIRT,
+ .pfn = __phys_to_pfn(L4_24XX_PHYS),
+ .length = L4_24XX_SIZE,
.type = MT_DEVICE
},
- {
- .virtual = OMAP243X_GPMC_VIRT,
- .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
- .length = OMAP243X_GPMC_SIZE,
- .type = MT_DEVICE
- },
-#endif
+};
+
+#ifdef CONFIG_ARCH_OMAP2420
+static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
@@ -87,12 +79,109 @@
.pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
.length = DSP_MMU_24XX_SIZE,
.type = MT_DEVICE
- }
+ },
};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static struct map_desc omap243x_io_desc[] __initdata = {
+ {
+ .virtual = L4_WK_243X_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_243X_PHYS),
+ .length = L4_WK_243X_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP243X_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
+ .length = OMAP243X_GPMC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP243X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
+ .length = OMAP243X_SDRC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP243X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
+ .length = OMAP243X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+};
+#endif
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_34XX_VIRT,
+ .pfn = __phys_to_pfn(L3_34XX_PHYS),
+ .length = L3_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_34XX_PHYS),
+ .length = L4_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_WK_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
+ .length = L4_WK_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP34XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+ .length = OMAP34XX_GPMC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
+ .length = OMAP343X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
+ .length = OMAP343X_SDRC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_PER_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
+ .length = L4_PER_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_EMU_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
+ .length = L4_EMU_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+};
+#endif
+
void __init omap2_map_common_io(void)
{
- iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+#if defined(CONFIG_ARCH_OMAP2420)
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+ iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
@@ -112,11 +201,6 @@
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
omap2_init_memory();
-#endif
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index c39e26d..d354e0f 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -128,6 +128,8 @@
if (cpu_is_omap24xx())
bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+ else if (cpu_is_omap34xx())
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
omap_irq_bank_init_one(bank);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 6b49cc9..48b01f4 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -102,6 +102,17 @@
return prev;
}
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type)
+{
+}
+#endif
+
void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
@@ -166,6 +177,9 @@
{
u32 l;
+ if (!cpu_is_omap2420())
+ return;
+
l = sms_read_reg(SMS_SYSCONFIG);
l &= ~(0x3 << 3);
l |= (0x2 << 3);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 6188e2f..5558803 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -298,13 +298,13 @@
/* TLL - HSUSB: 12-pin TLL Port 1*/
MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
@@ -324,13 +324,13 @@
/* TLL - HSUSB: 12-pin TLL Port 2*/
MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
@@ -350,13 +350,13 @@
/* TLL - HSUSB: 12-pin TLL Port 3*/
MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
@@ -373,6 +373,49 @@
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
new file mode 100644
index 0000000..2c71461
--- /dev/null
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+ .text
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap3_sram_configure_core_dpll)
+ stmfd sp!, {r1-r12, lr} @ store regs to stack
+ cmp r3, #0x2
+ blne configure_sdrc
+ cmp r3, #0x2
+ blne lock_dll
+ cmp r3, #0x1
+ blne unlock_dll
+ bl sdram_in_selfrefresh @ put the SDRAM in self refresh
+ bl configure_core_dpll
+ bl enable_sdrc
+ cmp r3, #0x1
+ blne wait_dll_unlock
+ cmp r3, #0x2
+ blne wait_dll_lock
+ cmp r3, #0x1
+ blne configure_sdrc
+ mov r0, #0 @ return value
+ ldmfd sp!, {r1-r12, pc} @ restore regs and return
+unlock_dll:
+ ldr r4, omap3_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ orr r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+lock_dll:
+ ldr r4, omap3_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ bic r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+sdram_in_selfrefresh:
+ mov r5, #0x0 @ Move 0 to R5
+ mcr p15, 0, r5, c7, c10, 5 @ memory barrier
+ ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+ ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r5, [r4]
+ bic r5, r5, #0x2 @ disable iclk bit for SRDC
+ str r5, [r4]
+wait_sdrc_idle:
+ ldr r4, omap3_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2 @ check for SDRC idle
+ cmp r5, #2
+ bne wait_sdrc_idle
+ bx lr
+configure_core_dpll:
+ ldr r4, omap3_cm_clksel1_pll
+ ldr r5, [r4]
+ ldr r6, core_m2_mask_val @ modify m2 for core dpll
+ and r5, r5, r6
+ orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
+ str r5, [r4]
+ mov r5, #0x800 @ wait for the clock to stabilise
+ cmp r3, #2
+ bne wait_clk_stable
+ bx lr
+wait_clk_stable:
+ subs r5, r5, #1
+ bne wait_clk_stable
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bx lr
+enable_sdrc:
+ ldr r4, omap3_cm_iclken1_core
+ ldr r5, [r4]
+ orr r5, r5, #0x2 @ enable iclk bit for SDRC
+ str r5, [r4]
+wait_sdrc_idle1:
+ ldr r4, omap3_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2
+ cmp r5, #0
+ bne wait_sdrc_idle1
+ ldr r4, omap3_sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+wait_dll_lock:
+ ldr r4, omap3_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ bx lr
+wait_dll_unlock:
+ ldr r4, omap3_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x0
+ bne wait_dll_unlock
+ bx lr
+configure_sdrc:
+ ldr r4, omap3_sdrc_rfr_ctrl
+ str r0, [r4]
+ ldr r4, omap3_sdrc_actim_ctrla
+ str r1, [r4]
+ ldr r4, omap3_sdrc_actim_ctrlb
+ str r2, [r4]
+ bx lr
+
+omap3_sdrc_power:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap3_cm_clksel1_pll:
+ .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap3_cm_idlest1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap3_cm_iclken1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap3_sdrc_rfr_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap3_sdrc_actim_ctrla:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
+omap3_sdrc_actim_ctrlb:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_dlla_status:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap3_sdrc_dlla_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+ .word 0x07FFFFFF
+
+ENTRY(omap3_sram_configure_core_dpll_sz)
+ .word . - omap3_sram_configure_core_dpll
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ef62bf2..a94f0c4 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,9 @@
config ARCH_OMAP2
bool "TI OMAP2"
+config ARCH_OMAP3
+ bool "TI OMAP3"
+
endchoice
comment "OMAP Feature Selections"
@@ -112,13 +115,13 @@
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX and 24XX.
+ currently only available for OMAP16XX, 24XX and 34XX.
endchoice
@@ -133,7 +136,7 @@
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to use OMAP Dual-Mode timers.
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 1c1d831..2625ce3 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -94,6 +94,10 @@
static void omap_init_kp(void)
{
+ /* 2430 and 34xx keypad is on TWL4030 */
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
+ return;
+
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
@@ -395,8 +399,17 @@
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP_WDT_BASE 0x48314000
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#ifdef CONFIG_ARCH_OMAP2430
+/* WDT2 */
+#define OMAP_WDT_BASE 0x49016000
+#else
#define OMAP_WDT_BASE 0x48022000
+#endif
+
#else
#define OMAP_WDT_BASE 0xfffeb000
#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b0039b..1b11f5c 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -35,6 +35,18 @@
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00004000 @ UART 3
#endif
+
+#elif CONFIG_ARCH_OMAP3
+ moveq \rx, #0x48000000 @ physical base address
+ movne \rx, #0xd8000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ add \rx, \rx, #0x00fb0000 @ UART 3
+ add \rx, \rx, #0x00006000
+#endif
#endif
.endm
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index d4e9043..030118e 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -55,9 +55,17 @@
1510:
.endm
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */
.macro disable_fiq
.endm
@@ -79,7 +87,7 @@
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
2222:
- ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
+ ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 3c7b425..45b6784 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -84,6 +84,10 @@
u16 access; /* Start-cycle to first data valid delay */
u16 rd_cycle; /* Total read cycle time */
u16 wr_cycle; /* Total write cycle time */
+
+ /* The following are only on OMAP3430 */
+ u16 wr_access; /* WRACCESSTIME */
+ u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index dd0cf06..adc83b7 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -73,7 +73,6 @@
#define L4_24XX_VIRT 0xd8000000
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-#ifdef CONFIG_ARCH_OMAP2430
#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
#define L4_WK_243X_VIRT 0xd9000000
#define L4_WK_243X_SIZE SZ_1M
@@ -87,8 +86,6 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
-#endif
-
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index e9fd630..9ee0496 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -286,6 +286,41 @@
#define INT_24XX_USB_IRQ_OTG 80
#define INT_24XX_MMC_IRQ 83
+#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_34XX_ST_MCBSP2_IRQ 4
+#define INT_34XX_ST_MCBSP3_IRQ 5
+#define INT_34XX_SSM_ABORT_IRQ 6
+#define INT_34XX_SYS_NIRQ 7
+#define INT_34XX_D2D_FW_IRQ 8
+#define INT_34XX_PRCM_MPU_IRQ 11
+#define INT_34XX_MCBSP1_IRQ 16
+#define INT_34XX_MCBSP2_IRQ 17
+#define INT_34XX_MCBSP3_IRQ 22
+#define INT_34XX_MCBSP4_IRQ 23
+#define INT_34XX_CAM_IRQ 24
+#define INT_34XX_MCBSP5_IRQ 27
+#define INT_34XX_GPIO_BANK1 29
+#define INT_34XX_GPIO_BANK2 30
+#define INT_34XX_GPIO_BANK3 31
+#define INT_34XX_GPIO_BANK4 32
+#define INT_34XX_GPIO_BANK5 33
+#define INT_34XX_GPIO_BANK6 34
+#define INT_34XX_USIM_IRQ 35
+#define INT_34XX_WDT3_IRQ 36
+#define INT_34XX_SPI4_IRQ 48
+#define INT_34XX_SHA1MD52_IRQ 49
+#define INT_34XX_FPKA_READY_IRQ 50
+#define INT_34XX_SHA1MD51_IRQ 51
+#define INT_34XX_RNG_IRQ 52
+#define INT_34XX_I2C3_IRQ 61
+#define INT_34XX_FPKA_ERROR_IRQ 64
+#define INT_34XX_PBIAS_IRQ 75
+#define INT_34XX_OHCI_IRQ 76
+#define INT_34XX_EHCI_IRQ 77
+#define INT_34XX_TLL_IRQ 78
+#define INT_34XX_PARTHASH_IRQ 79
+#define INT_34XX_MMC3_IRQ 94
+#define INT_34XX_GPT12_IRQ 95
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index a3074f2..c8d0aa1 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -91,7 +91,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index a325caf..d40cac6 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,7 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 5670d56..6bbf178 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -723,7 +723,31 @@
AB12_3430_USB3HS_TLL_DATA4,
AB13_3430_USB3HS_TLL_DATA5,
AA13_3430_USB3HS_TLL_DATA6,
- AA12_3430_USB3HS_TLL_DATA7
+ AA12_3430_USB3HS_TLL_DATA7,
+
+ /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+ AF10_3430_USB1FS_PHY_MM1_RXDP,
+ AG9_3430_USB1FS_PHY_MM1_RXDM,
+ W13_3430_USB1FS_PHY_MM1_RXRCV,
+ W12_3430_USB1FS_PHY_MM1_TXSE0,
+ W11_3430_USB1FS_PHY_MM1_TXDAT,
+ Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+ AF7_3430_USB2FS_PHY_MM2_RXDP,
+ AH7_3430_USB2FS_PHY_MM2_RXDM,
+ AB10_3430_USB2FS_PHY_MM2_RXRCV,
+ AB9_3430_USB2FS_PHY_MM2_TXSE0,
+ W3_3430_USB2FS_PHY_MM2_TXDAT,
+ T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+ AH3_3430_USB3FS_PHY_MM3_RXDP,
+ AE3_3430_USB3FS_PHY_MM3_RXDM,
+ AD1_3430_USB3FS_PHY_MM3_RXRCV,
+ AE1_3430_USB3FS_PHY_MM3_TXSE0,
+ AD2_3430_USB3FS_PHY_MM3_TXDAT,
+ AC1_3430_USB3FS_PHY_MM3_TXEN_N,
};
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 556f0eb..24335d4 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -39,7 +39,6 @@
/* interrupt controller */
#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
#define OMAP24XX_IVA_INTC_BASE 0x40000000
-#define IRQ_SIR_IRQ 0x0040
#define OMAP2420_CTRL_BASE L4_24XX_BASE
#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 25ee381..a98c6c3 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,8 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
-#define SDRC_ACTIM_CTRL_A 0x09c
-#define SDRC_ACTIM_CTRL_B 0x0a0
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index e093234..ab35d62 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,6 +21,10 @@
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2);
+
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
@@ -53,4 +57,10 @@
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06a28c7..06923f2 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -40,7 +40,7 @@
static inline void arch_reset(char mode)
{
- if (!cpu_is_omap24xx())
+ if (!cpu_class_is_omap2())
omap1_arch_reset(mode);
else
omap_prcm_arch_reset(mode);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 0253c45..af326ef 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -47,11 +47,13 @@
}
#endif
#ifdef CONFIG_ARCH_OMAP2
- if (cpu_class_is_omap2()) {
+ if (cpu_is_omap24xx()) {
if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
+ }
+ if (cpu_is_omap2420()) {
if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
@@ -59,14 +61,36 @@
if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
}
-#ifdef CONFIG_ARCH_OMAP2430
if (cpu_is_omap2430()) {
if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
- return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT);
+ return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
- return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+ return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+ if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
+ return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
+ if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
+ return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
}
#endif
+#ifdef CONFIG_ARCH_OMAP3
+ if (cpu_is_omap34xx()) {
+ if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
+ return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
+ if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+ return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+ if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
+ return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
+ if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
+ return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
+ if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
+ return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
+ if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
+ return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
+ if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
+ return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
+ if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
+ return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
+ }
#endif
return __arm_ioremap(p, size, type);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index ac67eeb..4d22452 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -271,7 +271,7 @@
#define omap1_sram_init() do {} while (0)
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
@@ -352,23 +352,19 @@
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
-u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb,
+ u32 m2);
+u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2)
{
- if (!_omap2_sram_reprogram_gpmc)
+ if (!_omap3_sram_configure_core_dpll)
omap_sram_error();
- return _omap2_sram_reprogram_gpmc(perf_level);
-}
-
-static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
- u32 freqsel, u32 m2);
-u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
-{
- if (!_omap2_sram_configure_core_dpll)
- omap_sram_error();
-
- return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+ return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
+ sdrc_actim_ctrla,
+ sdrc_actim_ctrlb, m2);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -376,31 +372,16 @@
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
- _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
- omap34xx_sram_reprogram_gpmc_sz);
-
- _omap2_sram_configure_core_dpll =
- omap_sram_push(omap34xx_sram_configure_core_dpll,
- omap34xx_sram_configure_core_dpll_sz);
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
}
int __init omap34xx_sram_init(void)
{
- _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
- omap34xx_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
- omap34xx_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
- omap34xx_sram_set_prcm_sz);
-
- _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
- omap34xx_sram_reprogram_gpmc_sz);
-
- _omap2_sram_configure_core_dpll =
- omap_sram_push(omap34xx_sram_configure_core_dpll,
- omap34xx_sram_configure_core_dpll_sz);
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
return 0;
}