| config IMX_HAVE_DMA_V1 |
| bool |
| |
| config HAVE_IMX_GPC |
| bool |
| |
| config HAVE_IMX_MMDC |
| bool |
| |
| config HAVE_IMX_SRC |
| bool |
| |
| config ARCH_MX1 |
| bool |
| |
| config MACH_MX21 |
| bool |
| |
| config ARCH_MX25 |
| bool |
| |
| config MACH_MX27 |
| bool |
| |
| config SOC_IMX1 |
| bool |
| select ARCH_MX1 |
| select CPU_ARM920T |
| select IMX_HAVE_DMA_V1 |
| select IMX_HAVE_IOMUX_V1 |
| select MXC_AVIC |
| |
| config SOC_IMX21 |
| bool |
| select MACH_MX21 |
| select CPU_ARM926T |
| select ARCH_MXC_AUDMUX_V1 |
| select IMX_HAVE_DMA_V1 |
| select IMX_HAVE_IOMUX_V1 |
| select MXC_AVIC |
| |
| config SOC_IMX25 |
| bool |
| select ARCH_MX25 |
| select CPU_ARM926T |
| select ARCH_MXC_AUDMUX_V2 |
| select ARCH_MXC_IOMUX_V3 |
| select MXC_AVIC |
| |
| config SOC_IMX27 |
| bool |
| select MACH_MX27 |
| select CPU_ARM926T |
| select ARCH_MXC_AUDMUX_V1 |
| select IMX_HAVE_DMA_V1 |
| select IMX_HAVE_IOMUX_V1 |
| select MXC_AVIC |
| |
| config SOC_IMX31 |
| bool |
| select CPU_V6 |
| select IMX_HAVE_PLATFORM_MXC_RNGA |
| select ARCH_MXC_AUDMUX_V2 |
| select MXC_AVIC |
| select SMP_ON_UP if SMP |
| |
| config SOC_IMX35 |
| bool |
| select CPU_V6 |
| select ARCH_MXC_IOMUX_V3 |
| select ARCH_MXC_AUDMUX_V2 |
| select HAVE_EPIT |
| select MXC_AVIC |
| select SMP_ON_UP if SMP |
| |
| |
| if ARCH_IMX_V4_V5 |
| |
| comment "MX1 platforms:" |
| config MACH_MXLADS |
| bool |
| |
| config ARCH_MX1ADS |
| bool "MX1ADS platform" |
| select MACH_MXLADS |
| select SOC_IMX1 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Say Y here if you are using Motorola MX1ADS/MXLADS boards |
| |
| config MACH_SCB9328 |
| bool "Synertronixx scb9328" |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Say Y here if you are using a Synertronixx scb9328 board |
| |
| config MACH_APF9328 |
| bool "APF9328" |
| select SOC_IMX1 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Say Yes here if you are using the Armadeus APF9328 development board |
| |
| comment "MX21 platforms:" |
| |
| config MACH_MX21ADS |
| bool "MX21ADS platform" |
| select SOC_IMX21 |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| help |
| Include support for MX21ADS platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| comment "MX25 platforms:" |
| |
| config MACH_MX25_3DS |
| bool "Support MX25PDK (3DS) Platform" |
| select SOC_IMX25 |
| select IMX_HAVE_PLATFORM_FLEXCAN |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMXDI_RTC |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| |
| config MACH_EUKREA_CPUIMX25 |
| bool "Support Eukrea CPUIMX25 Platform" |
| select SOC_IMX25 |
| select IMX_HAVE_PLATFORM_FLEXCAN |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMXDI_RTC |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| select MXC_ULPI if USB_ULPI |
| |
| choice |
| prompt "Baseboard" |
| depends on MACH_EUKREA_CPUIMX25 |
| default MACH_EUKREA_MBIMXSD25_BASEBOARD |
| |
| config MACH_EUKREA_MBIMXSD25_BASEBOARD |
| bool "Eukrea MBIMXSD development board" |
| select IMX_HAVE_PLATFORM_GPIO_KEYS |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select LEDS_GPIO_REGISTER |
| help |
| This adds board specific devices that can be found on Eukrea's |
| MBIMXSD evaluation board. |
| |
| endchoice |
| |
| comment "MX27 platforms:" |
| |
| config MACH_MX27ADS |
| bool "MX27ADS platform" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_MXC_W1 |
| help |
| Include support for MX27ADS platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_PCM038 |
| bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_MXC_W1 |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for phyCORE-i.MX27 (aka pcm038) platform. This |
| includes specific configurations for the module and its peripherals. |
| |
| choice |
| prompt "Baseboard" |
| depends on MACH_PCM038 |
| default MACH_PCM970_BASEBOARD |
| |
| config MACH_PCM970_BASEBOARD |
| bool "PHYTEC PCM970 development board" |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| help |
| This adds board specific devices that can be found on Phytec's |
| PCM970 evaluation board. |
| |
| endchoice |
| |
| config MACH_CPUIMX27 |
| bool "Eukrea CPUIMX27 module" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_MXC_W1 |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Eukrea CPUIMX27 platform. This includes |
| specific configurations for the module and its peripherals. |
| |
| config MACH_EUKREA_CPUIMX27_USESDHC2 |
| bool "CPUIMX27 integrates SDHC2 module" |
| depends on MACH_CPUIMX27 |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| help |
| This adds support for the internal SDHC2 used on CPUIMX27 |
| for wifi or eMMC. |
| |
| config MACH_EUKREA_CPUIMX27_USEUART4 |
| bool "CPUIMX27 integrates UART4 module" |
| depends on MACH_CPUIMX27 |
| help |
| This adds support for the internal UART4 used on CPUIMX27 |
| for bluetooth. |
| |
| choice |
| prompt "Baseboard" |
| depends on MACH_CPUIMX27 |
| default MACH_EUKREA_MBIMX27_BASEBOARD |
| |
| config MACH_EUKREA_MBIMX27_BASEBOARD |
| bool "Eukrea MBIMX27 development board" |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select LEDS_GPIO_REGISTER |
| help |
| This adds board specific devices that can be found on Eukrea's |
| MBIMX27 evaluation board. |
| |
| endchoice |
| |
| config MACH_MX27_3DS |
| bool "MX27PDK platform" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_DEBUG_BOARD |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for MX27PDK platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_IMX27_VISSTRIM_M10 |
| bool "Vista Silicon i.MX27 Visstrim_m10" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_GPIO_KEYS |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| help |
| Include support for Visstrim_m10 platform and its different variants. |
| This includes specific configurations for the board and its |
| peripherals. |
| |
| config MACH_IMX27LITE |
| bool "LogicPD MX27 LITEKIT platform" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| help |
| Include support for MX27 LITEKIT platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_PCA100 |
| bool "Phytec phyCARD-s (pca100)" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_MXC_W1 |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for phyCARD-s (aka pca100) platform. This |
| includes specific configurations for the module and its peripherals. |
| |
| config MACH_MXT_TD60 |
| bool "Maxtrack i-MXT TD60" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_IMX_FB |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| help |
| Include support for i-MXT (aka td60) platform. This |
| includes specific configurations for the module and its peripherals. |
| |
| config MACH_IMX27IPCAM |
| bool "IMX27 IPCAM platform" |
| select SOC_IMX27 |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Include support for IMX27 IPCAM platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| endif |
| |
| if ARCH_IMX_V6_V7 |
| |
| comment "MX31 platforms:" |
| |
| config MACH_MX31ADS |
| bool "Support MX31ADS platforms" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select IMX_HAVE_PLATFORM_IMX_UART |
| default y |
| help |
| Include support for MX31ADS platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_MX31ADS_WM1133_EV1 |
| bool "Support Wolfson Microelectronics 1133-EV1 module" |
| depends on MACH_MX31ADS |
| depends on MFD_WM8350_I2C |
| depends on REGULATOR_WM8350 |
| select MFD_WM8350_CONFIG_MODE_0 |
| select MFD_WM8352_CONFIG_MODE_0 |
| help |
| Include support for the Wolfson Microelectronics 1133-EV1 PMU |
| and audio module for the MX31ADS platform. |
| |
| config MACH_MX31LILLY |
| bool "Support MX31 LILLY-1131 platforms (INCO startec)" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for mx31 based LILLY1131 modules. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_MX31LITE |
| bool "Support MX31 LITEKIT (LogicPD)" |
| select SOC_IMX31 |
| select MXC_ULPI if USB_ULPI |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_MXC_RTC |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select LEDS_GPIO_REGISTER |
| help |
| Include support for MX31 LITEKIT platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_PCM037 |
| bool "Support Phytec pcm037 (i.MX31) platforms" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_MXC_W1 |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Phytec pcm037 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_PCM037_EET |
| bool "Support pcm037 EET board extensions" |
| depends on MACH_PCM037 |
| select IMX_HAVE_PLATFORM_GPIO_KEYS |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| help |
| Add support for PCM037 EET baseboard extensions. If you are using the |
| OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel |
| command-line parameter. |
| |
| config MACH_MX31_3DS |
| bool "Support MX31PDK (3DS)" |
| select SOC_IMX31 |
| select MXC_DEBUG_BOARD |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for MX31PDK (3DS) platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_MX31_3DS_MXC_NAND_USE_BBT |
| bool "Make the MXC NAND driver use the in flash Bad Block Table" |
| depends on MACH_MX31_3DS |
| depends on MTD_NAND_MXC |
| help |
| Enable this if you want that the MXC NAND driver uses the in flash |
| Bad Block Table to know what blocks are bad instead of scanning the |
| entire flash looking for bad block markers. |
| |
| config MACH_MX31MOBOARD |
| bool "Support mx31moboard platforms (EPFL Mobots group)" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_SPI_IMX |
| select LEDS_GPIO_REGISTER |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for mx31moboard platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_QONG |
| bool "Support Dave/DENX QongEVB-LITE platform" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| help |
| Include support for Dave/DENX QongEVB-LITE platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_ARMADILLO5X0 |
| bool "Support Atmark Armadillo-500 Development Base Board" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_GPIO_KEYS |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_MMC |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Atmark Armadillo-500 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_KZM_ARM11_01 |
| bool "Support KZM-ARM11-01(Kyoto Microcomputer)" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| help |
| Include support for KZM-ARM11-01. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_BUG |
| bool "Support Buglabs BUGBase platform" |
| select SOC_IMX31 |
| select IMX_HAVE_PLATFORM_IMX_UART |
| default y |
| help |
| Include support for BUGBase 1.3 platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| comment "MX35 platforms:" |
| |
| config MACH_PCM043 |
| bool "Support Phytec pcm043 (i.MX35) platforms" |
| select SOC_IMX35 |
| select IMX_HAVE_PLATFORM_FLEXCAN |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Phytec pcm043 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| config MACH_MX35_3DS |
| bool "Support MX35PDK platform" |
| select SOC_IMX35 |
| select MXC_DEBUG_BOARD |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| help |
| Include support for MX35PDK platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| config MACH_EUKREA_CPUIMX35 |
| bool "Support Eukrea CPUIMX35 Platform" |
| select SOC_IMX35 |
| select IMX_HAVE_PLATFORM_FLEXCAN |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| select MXC_ULPI if USB_ULPI |
| help |
| Include support for Eukrea CPUIMX35 platform. This includes |
| specific configurations for the board and its peripherals. |
| |
| choice |
| prompt "Baseboard" |
| depends on MACH_EUKREA_CPUIMX35 |
| default MACH_EUKREA_MBIMXSD35_BASEBOARD |
| |
| config MACH_EUKREA_MBIMXSD35_BASEBOARD |
| bool "Eukrea MBIMXSD development board" |
| select IMX_HAVE_PLATFORM_GPIO_KEYS |
| select IMX_HAVE_PLATFORM_IMX_SSI |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select LEDS_GPIO_REGISTER |
| help |
| This adds board specific devices that can be found on Eukrea's |
| MBIMXSD evaluation board. |
| |
| endchoice |
| |
| config MACH_VPR200 |
| bool "Support VPR200 platform" |
| select SOC_IMX35 |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC |
| select IMX_HAVE_PLATFORM_GPIO_KEYS |
| select IMX_HAVE_PLATFORM_IMX2_WDT |
| select IMX_HAVE_PLATFORM_IMX_UART |
| select IMX_HAVE_PLATFORM_IMX_I2C |
| select IMX_HAVE_PLATFORM_IPU_CORE |
| select IMX_HAVE_PLATFORM_MXC_EHCI |
| select IMX_HAVE_PLATFORM_MXC_NAND |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX |
| help |
| Include support for VPR200 platform. This includes specific |
| configurations for the board and its peripherals. |
| |
| comment "i.MX6 family:" |
| |
| config SOC_IMX6Q |
| bool "i.MX6 Quad support" |
| select ARM_GIC |
| select CACHE_L2X0 |
| select CPU_V7 |
| select HAVE_ARM_SCU |
| select HAVE_IMX_GPC |
| select HAVE_IMX_MMDC |
| select HAVE_IMX_SRC |
| select USE_OF |
| |
| help |
| This enables support for Freescale i.MX6 Quad processor. |
| |
| endif |