| /* |
| * vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1 |
| * |
| * Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/types.h> |
| #include <asm/uaccess.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-i2c-drv.h> |
| |
| MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); |
| MODULE_AUTHOR("Laurent Pinchart"); |
| MODULE_LICENSE("GPL"); |
| |
| static int debug; |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
| |
| |
| #define VPX_TIMEOUT_COUNT 10 |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| struct vpx3220 { |
| struct v4l2_subdev sd; |
| unsigned char reg[255]; |
| |
| v4l2_std_id norm; |
| int ident; |
| int input; |
| int enable; |
| int bright; |
| int contrast; |
| int hue; |
| int sat; |
| }; |
| |
| static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct vpx3220, sd); |
| } |
| |
| static char *inputs[] = { "internal", "composite", "svideo" }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static inline int vpx3220_write(struct v4l2_subdev *sd, u8 reg, u8 value) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct vpx3220 *decoder = i2c_get_clientdata(client); |
| |
| decoder->reg[reg] = value; |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static inline int vpx3220_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int vpx3220_fp_status(struct v4l2_subdev *sd) |
| { |
| unsigned char status; |
| unsigned int i; |
| |
| for (i = 0; i < VPX_TIMEOUT_COUNT; i++) { |
| status = vpx3220_read(sd, 0x29); |
| |
| if (!(status & 4)) |
| return 0; |
| |
| udelay(10); |
| |
| if (need_resched()) |
| cond_resched(); |
| } |
| |
| return -1; |
| } |
| |
| static int vpx3220_fp_write(struct v4l2_subdev *sd, u8 fpaddr, u16 data) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| /* Write the 16-bit address to the FPWR register */ |
| if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) { |
| v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); |
| return -1; |
| } |
| |
| if (vpx3220_fp_status(sd) < 0) |
| return -1; |
| |
| /* Write the 16-bit data to the FPDAT register */ |
| if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) { |
| v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static u16 vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| s16 data; |
| |
| /* Write the 16-bit address to the FPRD register */ |
| if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) { |
| v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); |
| return -1; |
| } |
| |
| if (vpx3220_fp_status(sd) < 0) |
| return -1; |
| |
| /* Read the 16-bit data from the FPDAT register */ |
| data = i2c_smbus_read_word_data(client, 0x28); |
| if (data == -1) { |
| v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); |
| return -1; |
| } |
| |
| return swab16(data); |
| } |
| |
| static int vpx3220_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len) |
| { |
| u8 reg; |
| int ret = -1; |
| |
| while (len >= 2) { |
| reg = *data++; |
| ret = vpx3220_write(sd, reg, *data++); |
| if (ret < 0) |
| break; |
| len -= 2; |
| } |
| |
| return ret; |
| } |
| |
| static int vpx3220_write_fp_block(struct v4l2_subdev *sd, |
| const u16 *data, unsigned int len) |
| { |
| u8 reg; |
| int ret = 0; |
| |
| while (len > 1) { |
| reg = *data++; |
| ret |= vpx3220_fp_write(sd, reg, *data++); |
| len -= 2; |
| } |
| |
| return ret; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static const unsigned short init_ntsc[] = { |
| 0x1c, 0x00, /* NTSC tint angle */ |
| 0x88, 17, /* Window 1 vertical */ |
| 0x89, 240, /* Vertical lines in */ |
| 0x8a, 240, /* Vertical lines out */ |
| 0x8b, 000, /* Horizontal begin */ |
| 0x8c, 640, /* Horizontal length */ |
| 0x8d, 640, /* Number of pixels */ |
| 0x8f, 0xc00, /* Disable window 2 */ |
| 0xf0, 0x73, /* 13.5 MHz transport, Forced |
| * mode, latch windows */ |
| 0xf2, 0x13, /* NTSC M, composite input */ |
| 0xe7, 0x1e1, /* Enable vertical standard |
| * locking @ 240 lines */ |
| }; |
| |
| static const unsigned short init_pal[] = { |
| 0x88, 23, /* Window 1 vertical begin */ |
| 0x89, 288, /* Vertical lines in (16 lines |
| * skipped by the VFE) */ |
| 0x8a, 288, /* Vertical lines out (16 lines |
| * skipped by the VFE) */ |
| 0x8b, 16, /* Horizontal begin */ |
| 0x8c, 768, /* Horizontal length */ |
| 0x8d, 784, /* Number of pixels |
| * Must be >= Horizontal begin + Horizontal length */ |
| 0x8f, 0xc00, /* Disable window 2 */ |
| 0xf0, 0x77, /* 13.5 MHz transport, Forced |
| * mode, latch windows */ |
| 0xf2, 0x3d1, /* PAL B,G,H,I, composite input */ |
| 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ |
| }; |
| |
| static const unsigned short init_secam[] = { |
| 0x88, 23, /* Window 1 vertical begin */ |
| 0x89, 288, /* Vertical lines in (16 lines |
| * skipped by the VFE) */ |
| 0x8a, 288, /* Vertical lines out (16 lines |
| * skipped by the VFE) */ |
| 0x8b, 16, /* Horizontal begin */ |
| 0x8c, 768, /* Horizontal length */ |
| 0x8d, 784, /* Number of pixels |
| * Must be >= Horizontal begin + Horizontal length */ |
| 0x8f, 0xc00, /* Disable window 2 */ |
| 0xf0, 0x77, /* 13.5 MHz transport, Forced |
| * mode, latch windows */ |
| 0xf2, 0x3d5, /* SECAM, composite input */ |
| 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ |
| }; |
| |
| static const unsigned char init_common[] = { |
| 0xf2, 0x00, /* Disable all outputs */ |
| 0x33, 0x0d, /* Luma : VIN2, Chroma : CIN |
| * (clamp off) */ |
| 0xd8, 0xa8, /* HREF/VREF active high, VREF |
| * pulse = 2, Odd/Even flag */ |
| 0x20, 0x03, /* IF compensation 0dB/oct */ |
| 0xe0, 0xff, /* Open up all comparators */ |
| 0xe1, 0x00, |
| 0xe2, 0x7f, |
| 0xe3, 0x80, |
| 0xe4, 0x7f, |
| 0xe5, 0x80, |
| 0xe6, 0x00, /* Brightness set to 0 */ |
| 0xe7, 0xe0, /* Contrast to 1.0, noise shaping |
| * 10 to 8 2-bit error diffusion */ |
| 0xe8, 0xf8, /* YUV422, CbCr binary offset, |
| * ... (p.32) */ |
| 0xea, 0x18, /* LLC2 connected, output FIFO |
| * reset with VACTintern */ |
| 0xf0, 0x8a, /* Half full level to 10, bus |
| * shuffler [7:0, 23:16, 15:8] */ |
| 0xf1, 0x18, /* Single clock, sync mode, no |
| * FE delay, no HLEN counter */ |
| 0xf8, 0x12, /* Port A, PIXCLK, HF# & FE# |
| * strength to 2 */ |
| 0xf9, 0x24, /* Port B, HREF, VREF, PREF & |
| * ALPHA strength to 4 */ |
| }; |
| |
| static const unsigned short init_fp[] = { |
| 0x59, 0, |
| 0xa0, 2070, /* ACC reference */ |
| 0xa3, 0, |
| 0xa4, 0, |
| 0xa8, 30, |
| 0xb2, 768, |
| 0xbe, 27, |
| 0x58, 0, |
| 0x26, 0, |
| 0x4b, 0x298, /* PLL gain */ |
| }; |
| |
| |
| static int vpx3220_init(struct v4l2_subdev *sd, u32 val) |
| { |
| struct vpx3220 *decoder = to_vpx3220(sd); |
| |
| vpx3220_write_block(sd, init_common, sizeof(init_common)); |
| vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1); |
| if (decoder->norm & V4L2_STD_NTSC) |
| vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1); |
| else if (decoder->norm & V4L2_STD_PAL) |
| vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); |
| else if (decoder->norm & V4L2_STD_SECAM) |
| vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1); |
| else |
| vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); |
| return 0; |
| } |
| |
| static int vpx3220_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) |
| { |
| int res = V4L2_IN_ST_NO_SIGNAL, status; |
| v4l2_std_id std = 0; |
| |
| v4l2_dbg(1, debug, sd, "VIDIOC_QUERYSTD/VIDIOC_INT_G_INPUT_STATUS\n"); |
| |
| status = vpx3220_fp_read(sd, 0x0f3); |
| |
| v4l2_dbg(1, debug, sd, "status: 0x%04x\n", status); |
| |
| if (status < 0) |
| return status; |
| |
| if ((status & 0x20) == 0) { |
| res = 0; |
| |
| switch (status & 0x18) { |
| case 0x00: |
| case 0x10: |
| case 0x14: |
| case 0x18: |
| std = V4L2_STD_PAL; |
| break; |
| |
| case 0x08: |
| std = V4L2_STD_SECAM; |
| break; |
| |
| case 0x04: |
| case 0x0c: |
| case 0x1c: |
| std = V4L2_STD_NTSC; |
| break; |
| } |
| } |
| if (pstd) |
| *pstd = std; |
| if (pstatus) |
| *pstatus = status; |
| return 0; |
| } |
| |
| static int vpx3220_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) |
| { |
| return vpx3220_status(sd, NULL, std); |
| } |
| |
| static int vpx3220_g_input_status(struct v4l2_subdev *sd, u32 *status) |
| { |
| return vpx3220_status(sd, status, NULL); |
| } |
| |
| static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std) |
| { |
| struct vpx3220 *decoder = to_vpx3220(sd); |
| int temp_input; |
| |
| /* Here we back up the input selection because it gets |
| overwritten when we fill the registers with the |
| choosen video norm */ |
| temp_input = vpx3220_fp_read(sd, 0xf2); |
| |
| v4l2_dbg(1, debug, sd, "VIDIOC_S_STD %llx\n", (unsigned long long)std); |
| if (std & V4L2_STD_NTSC) { |
| vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1); |
| v4l2_dbg(1, debug, sd, "norm switched to NTSC\n"); |
| } else if (std & V4L2_STD_PAL) { |
| vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); |
| v4l2_dbg(1, debug, sd, "norm switched to PAL\n"); |
| } else if (std & V4L2_STD_SECAM) { |
| vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1); |
| v4l2_dbg(1, debug, sd, "norm switched to SECAM\n"); |
| } else { |
| return -EINVAL; |
| } |
| |
| decoder->norm = std; |
| |
| /* And here we set the backed up video input again */ |
| vpx3220_fp_write(sd, 0xf2, temp_input | 0x0010); |
| udelay(10); |
| return 0; |
| } |
| |
| static int vpx3220_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route) |
| { |
| int data; |
| |
| /* RJ: route->input = 0: ST8 (PCTV) input |
| route->input = 1: COMPOSITE input |
| route->input = 2: SVHS input */ |
| |
| const int input[3][2] = { |
| {0x0c, 0}, |
| {0x0d, 0}, |
| {0x0e, 1} |
| }; |
| |
| if (route->input < 0 || route->input > 2) |
| return -EINVAL; |
| |
| v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[route->input]); |
| |
| vpx3220_write(sd, 0x33, input[route->input][0]); |
| |
| data = vpx3220_fp_read(sd, 0xf2) & ~(0x0020); |
| if (data < 0) |
| return data; |
| /* 0x0010 is required to latch the setting */ |
| vpx3220_fp_write(sd, 0xf2, |
| data | (input[route->input][1] << 5) | 0x0010); |
| |
| udelay(10); |
| return 0; |
| } |
| |
| static int vpx3220_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| v4l2_dbg(1, debug, sd, "VIDIOC_STREAM%s\n", enable ? "ON" : "OFF"); |
| |
| vpx3220_write(sd, 0xf2, (enable ? 0x1b : 0x00)); |
| return 0; |
| } |
| |
| static int vpx3220_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) |
| { |
| switch (qc->id) { |
| case V4L2_CID_BRIGHTNESS: |
| v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); |
| break; |
| |
| case V4L2_CID_CONTRAST: |
| v4l2_ctrl_query_fill(qc, 0, 63, 1, 32); |
| break; |
| |
| case V4L2_CID_SATURATION: |
| v4l2_ctrl_query_fill(qc, 0, 4095, 1, 2048); |
| break; |
| |
| case V4L2_CID_HUE: |
| v4l2_ctrl_query_fill(qc, -512, 511, 1, 0); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vpx3220_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct vpx3220 *decoder = to_vpx3220(sd); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| ctrl->value = decoder->bright; |
| break; |
| case V4L2_CID_CONTRAST: |
| ctrl->value = decoder->contrast; |
| break; |
| case V4L2_CID_SATURATION: |
| ctrl->value = decoder->sat; |
| break; |
| case V4L2_CID_HUE: |
| ctrl->value = decoder->hue; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vpx3220_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct vpx3220 *decoder = to_vpx3220(sd); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| if (decoder->bright != ctrl->value) { |
| decoder->bright = ctrl->value; |
| vpx3220_write(sd, 0xe6, decoder->bright); |
| } |
| break; |
| case V4L2_CID_CONTRAST: |
| if (decoder->contrast != ctrl->value) { |
| /* Bit 7 and 8 is for noise shaping */ |
| decoder->contrast = ctrl->value; |
| vpx3220_write(sd, 0xe7, decoder->contrast + 192); |
| } |
| break; |
| case V4L2_CID_SATURATION: |
| if (decoder->sat != ctrl->value) { |
| decoder->sat = ctrl->value; |
| vpx3220_fp_write(sd, 0xa0, decoder->sat); |
| } |
| break; |
| case V4L2_CID_HUE: |
| if (decoder->hue != ctrl->value) { |
| decoder->hue = ctrl->value; |
| vpx3220_fp_write(sd, 0x1c, decoder->hue); |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) |
| { |
| struct vpx3220 *decoder = to_vpx3220(sd); |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct v4l2_subdev_core_ops vpx3220_core_ops = { |
| .g_chip_ident = vpx3220_g_chip_ident, |
| .init = vpx3220_init, |
| .g_ctrl = vpx3220_g_ctrl, |
| .s_ctrl = vpx3220_s_ctrl, |
| .queryctrl = vpx3220_queryctrl, |
| }; |
| |
| static const struct v4l2_subdev_tuner_ops vpx3220_tuner_ops = { |
| .s_std = vpx3220_s_std, |
| }; |
| |
| static const struct v4l2_subdev_video_ops vpx3220_video_ops = { |
| .s_routing = vpx3220_s_routing, |
| .s_stream = vpx3220_s_stream, |
| .querystd = vpx3220_querystd, |
| .g_input_status = vpx3220_g_input_status, |
| }; |
| |
| static const struct v4l2_subdev_ops vpx3220_ops = { |
| .core = &vpx3220_core_ops, |
| .tuner = &vpx3220_tuner_ops, |
| .video = &vpx3220_video_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------- |
| * Client management code |
| */ |
| |
| static int vpx3220_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct vpx3220 *decoder; |
| struct v4l2_subdev *sd; |
| const char *name = NULL; |
| u8 ver; |
| u16 pn; |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) |
| return -ENODEV; |
| |
| decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL); |
| if (decoder == NULL) |
| return -ENOMEM; |
| sd = &decoder->sd; |
| v4l2_i2c_subdev_init(sd, client, &vpx3220_ops); |
| decoder->norm = V4L2_STD_PAL; |
| decoder->input = 0; |
| decoder->enable = 1; |
| decoder->bright = 32768; |
| decoder->contrast = 32768; |
| decoder->hue = 32768; |
| decoder->sat = 32768; |
| |
| ver = i2c_smbus_read_byte_data(client, 0x00); |
| pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) + |
| i2c_smbus_read_byte_data(client, 0x01); |
| decoder->ident = V4L2_IDENT_VPX3220A; |
| if (ver == 0xec) { |
| switch (pn) { |
| case 0x4680: |
| name = "vpx3220a"; |
| break; |
| case 0x4260: |
| name = "vpx3216b"; |
| decoder->ident = V4L2_IDENT_VPX3216B; |
| break; |
| case 0x4280: |
| name = "vpx3214c"; |
| decoder->ident = V4L2_IDENT_VPX3214C; |
| break; |
| } |
| } |
| if (name) |
| v4l2_info(sd, "%s found @ 0x%x (%s)\n", name, |
| client->addr << 1, client->adapter->name); |
| else |
| v4l2_info(sd, "chip (%02x:%04x) found @ 0x%x (%s)\n", |
| ver, pn, client->addr << 1, client->adapter->name); |
| |
| vpx3220_write_block(sd, init_common, sizeof(init_common)); |
| vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1); |
| /* Default to PAL */ |
| vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); |
| return 0; |
| } |
| |
| static int vpx3220_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_device_unregister_subdev(sd); |
| kfree(to_vpx3220(sd)); |
| return 0; |
| } |
| |
| static const struct i2c_device_id vpx3220_id[] = { |
| { "vpx3220a", 0 }, |
| { "vpx3216b", 0 }, |
| { "vpx3214c", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, vpx3220_id); |
| |
| static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
| .name = "vpx3220", |
| .probe = vpx3220_probe, |
| .remove = vpx3220_remove, |
| .id_table = vpx3220_id, |
| }; |