Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
diff --git a/Documentation/input/appletouch.txt b/Documentation/input/appletouch.txt
new file mode 100644
index 0000000..b48d11d
--- /dev/null
+++ b/Documentation/input/appletouch.txt
@@ -0,0 +1,84 @@
+Apple Touchpad Driver (appletouch)
+----------------------------------
+ Copyright (C) 2005 Stelian Pop <stelian@popies.net>
+
+appletouch is a Linux kernel driver for the USB touchpad found on post
+February 2005 Apple Alu Powerbooks.
+
+This driver is derived from Johannes Berg's appletrackpad driver[1], but it has
+been improved in some areas:
+ * appletouch is a full kernel driver, no userspace program is necessary
+ * appletouch can be interfaced with the synaptics X11 driver, in order
+ to have touchpad acceleration, scrolling, etc.
+
+Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
+Frank Arnold for further improvements, and Alex Harper for some additional
+information about the inner workings of the touchpad sensors.
+
+Usage:
+------
+
+In order to use the touchpad in the basic mode, compile the driver and load
+the module. A new input device will be detected and you will be able to read
+the mouse data from /dev/input/mice (using gpm, or X11).
+
+In X11, you can configure the touchpad to use the synaptics X11 driver, which
+will give additional functionalities, like acceleration, scrolling, 2 finger
+tap for middle button mouse emulation, 3 finger tap for right button mouse
+emulation, etc. In order to do this, make sure you're using a recent version of
+the synaptics driver (tested with 0.14.2, available from [2]), and configure a
+new input device in your X11 configuration file (take a look below for an
+example). For additional configuration, see the synaptics driver documentation.
+
+ Section "InputDevice"
+ Identifier "Synaptics Touchpad"
+ Driver "synaptics"
+ Option "SendCoreEvents" "true"
+ Option "Device" "/dev/input/mice"
+ Option "Protocol" "auto-dev"
+ Option "LeftEdge" "0"
+ Option "RightEdge" "850"
+ Option "TopEdge" "0"
+ Option "BottomEdge" "645"
+ Option "MinSpeed" "0.4"
+ Option "MaxSpeed" "1"
+ Option "AccelFactor" "0.02"
+ Option "FingerLow" "0"
+ Option "FingerHigh" "30"
+ Option "MaxTapMove" "20"
+ Option "MaxTapTime" "100"
+ Option "HorizScrollDelta" "0"
+ Option "VertScrollDelta" "30"
+ Option "SHMConfig" "on"
+ EndSection
+
+ Section "ServerLayout"
+ ...
+ InputDevice "Mouse"
+ InputDevice "Synaptics Touchpad"
+ ...
+ EndSection
+
+Fuzz problems:
+--------------
+
+The touchpad sensors are very sensitive to heat, and will generate a lot of
+noise when the temperature changes. This is especially true when you power-on
+the laptop for the first time.
+
+The appletouch driver tries to handle this noise and auto adapt itself, but it
+is not perfect. If finger movements are not recognized anymore, try reloading
+the driver.
+
+You can activate debugging using the 'debug' module parameter. A value of 0
+deactivates any debugging, 1 activates tracing of invalid samples, 2 activates
+full tracing (each sample is being traced):
+ modprobe appletouch debug=1
+ or
+ echo "1" > /sys/module/appletouch/parameters/debug
+
+Links:
+------
+
+[1]: http://johannes.sipsolutions.net/PowerBook/touchpad/
+[2]: http://web.telia.com/~u89404340/touchpad/index.html
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 729c72d..f86550f 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -20,7 +20,7 @@
to /etc/fstab. This will mount usbfs at each reboot.
You can then issue `cat /proc/bus/usb/devices` to extract
- USB device information, and user mode drivers can use usbfs
+ USB device information, and user mode drivers can use usbfs
to interact with USB devices.
There are a number of mount options supported by usbfs.
@@ -32,7 +32,7 @@
still see references to the older "usbdevfs" name.
For more information on mounting the usbfs file system, see the
-"USB Device Filesystem" section of the USB Guide. The latest copy
+"USB Device Filesystem" section of the USB Guide. The latest copy
of the USB Guide can be found at http://www.linux-usb.org/
@@ -133,7 +133,7 @@
are the only transfers that reserve bandwidth. Control and bulk
transfers use all other bandwidth, including reserved bandwidth that
is not used for transfers (such as for short packets).
-
+
The percentage is how much of the "reserved" bandwidth is scheduled by
those transfers. For a low or full speed bus (loosely, "USB 1.1"),
90% of the bus bandwidth is reserved. For a high speed bus (loosely,
@@ -197,7 +197,7 @@
| | |__NumberOfInterfaces
| |__ "*" indicates the active configuration (others are " ")
|__Config info tag
-
+
USB devices may have multiple configurations, each of which act
rather differently. For example, a bus-powered configuration
might be much less capable than one that is self-powered. Only
@@ -228,7 +228,7 @@
For example, default settings may not use more than a small
amount of periodic bandwidth. To use significant fractions
of bus bandwidth, drivers must select a non-default altsetting.
-
+
Only one setting for an interface may be active at a time, and
only one driver may bind to an interface at a time. Most devices
have only one alternate setting per interface.
@@ -297,18 +297,21 @@
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
+
T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=1446 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
+
T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b4 ProdID=0001 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
+
T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0565 ProdID=0001 Rev= 1.08
diff --git a/drivers/usb/class/audio.c b/drivers/usb/class/audio.c
index f8f2156..5085827 100644
--- a/drivers/usb/class/audio.c
+++ b/drivers/usb/class/audio.c
@@ -631,8 +631,10 @@
i = u->flags;
spin_unlock_irqrestore(&as->lock, flags);
while (i & (FLG_URB0RUNNING|FLG_URB1RUNNING|FLG_SYNC0RUNNING|FLG_SYNC1RUNNING)) {
- set_current_state(notkilled ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ if (notkilled)
+ schedule_timeout_interruptible(1);
+ else
+ schedule_timeout_uninterruptible(1);
spin_lock_irqsave(&as->lock, flags);
i = u->flags;
spin_unlock_irqrestore(&as->lock, flags);
@@ -1102,8 +1104,10 @@
i = u->flags;
spin_unlock_irqrestore(&as->lock, flags);
while (i & (FLG_URB0RUNNING|FLG_URB1RUNNING|FLG_SYNC0RUNNING|FLG_SYNC1RUNNING)) {
- set_current_state(notkilled ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ if (notkilled)
+ schedule_timeout_interruptible(1);
+ else
+ schedule_timeout_uninterruptible(1);
spin_lock_irqsave(&as->lock, flags);
i = u->flags;
spin_unlock_irqrestore(&as->lock, flags);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 12ecdb0..1017a97 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1606,7 +1606,7 @@
return IRQ_NONE;
hcd->saw_irq = 1;
- if (hcd->state != start && hcd->state == HC_STATE_HALT)
+ if (hcd->state == HC_STATE_HALT)
usb_hc_died (hcd);
return IRQ_HANDLED;
}
@@ -1630,7 +1630,6 @@
spin_lock_irqsave (&hcd_root_hub_lock, flags);
if (hcd->rh_registered) {
hcd->poll_rh = 0;
- del_timer(&hcd->rh_timer);
/* make khubd clean up old urbs and devices */
usb_set_device_state (hcd->self.root_hub,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 758c7f0..a12cab5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -435,6 +435,7 @@
static void hub_power_on(struct usb_hub *hub)
{
int port1;
+ unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
/* if hub supports power switching, enable power on each port */
if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
@@ -444,8 +445,8 @@
USB_PORT_FEAT_POWER);
}
- /* Wait for power to be enabled */
- msleep(hub->descriptor->bPwrOn2PwrGood * 2);
+ /* Wait at least 100 msec for power to become stable */
+ msleep(max(pgood_delay, (unsigned) 100));
}
static void hub_quiesce(struct usb_hub *hub)
@@ -1460,7 +1461,7 @@
port1, status);
else {
status = hub_port_wait_reset(hub, port1, udev, delay);
- if (status)
+ if (status && status != -ENOTCONN)
dev_dbg(hub->intfdev,
"port_wait_reset: err = %d\n",
status);
@@ -1469,8 +1470,8 @@
/* return on disconnect or reset */
switch (status) {
case 0:
- /* TRSTRCY = 10 ms */
- msleep(10);
+ /* TRSTRCY = 10 ms; plus some extra */
+ msleep(10 + 40);
/* FALL THROUGH */
case -ENOTCONN:
case -ENODEV:
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 0208153..5c40980 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -483,6 +483,7 @@
data->state = STATE_EP_DISABLED;
data->desc.bDescriptorType = 0;
data->hs_desc.bDescriptorType = 0;
+ usb_ep_disable(data->ep);
}
put_ep (data);
return 0;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2507e89..b948ffd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -400,6 +400,23 @@
return -EIO;
}
break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NVidia reports that certain chips don't handle
+ * QH, ITD, or SITD addresses above 2GB. (But TD,
+ * data buffer, and periodic schedule are normal.)
+ */
+ switch (pdev->device) {
+ case 0x003c: /* MCP04 */
+ case 0x005b: /* CK804 */
+ case 0x00d8: /* CK8 */
+ case 0x00e8: /* CK8S */
+ if (pci_set_consistent_dma_mask(pdev,
+ DMA_31BIT_MASK) < 0)
+ ehci_warn (ehci, "can't enable NVidia "
+ "workaround for >2GB RAM\n");
+ break;
+ }
+ break;
}
/* optional debug port, normally in the first BAR */
@@ -759,12 +776,16 @@
if (time_before (jiffies, ehci->next_statechange))
msleep (100);
- /* If any port is suspended, we know we can/must resume the HC. */
+ /* If any port is suspended (or owned by the companion),
+ * we know we can/must resume the HC (and mustn't reset it).
+ */
for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
u32 status;
port--;
status = readl (&ehci->regs->port_status [port]);
- if (status & PORT_SUSPEND) {
+ if (!(status & PORT_POWER))
+ continue;
+ if (status & (PORT_SUSPEND | PORT_OWNER)) {
down (&hcd->self.root_hub->serialize);
retval = ehci_hub_resume (hcd);
up (&hcd->self.root_hub->serialize);
@@ -1126,8 +1147,7 @@
case QH_STATE_UNLINK: /* wait for hw to finish? */
idle_timeout:
spin_unlock_irqrestore (&ehci->lock, flags);
- set_current_state (TASK_UNINTERRUPTIBLE);
- schedule_timeout (1);
+ schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
if (list_empty (&qh->qtd_list)) {
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 36cc1f2..18d3f22 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -54,7 +54,7 @@
/* suspend any active/unsuspended ports, maybe allow wakeup */
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
- u32 t1 = readl (reg);
+ u32 t1 = readl (reg) & ~PORT_RWC_BITS;
u32 t2 = t1;
if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
@@ -115,7 +115,8 @@
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = readl (&ehci->regs->port_status [i]);
- temp &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
+ temp &= ~(PORT_RWC_BITS
+ | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
if (temp & PORT_SUSPEND) {
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
temp |= PORT_RESUME;
@@ -128,7 +129,7 @@
temp = readl (&ehci->regs->port_status [i]);
if ((temp & PORT_SUSPEND) == 0)
continue;
- temp &= ~PORT_RESUME;
+ temp &= ~(PORT_RWC_BITS | PORT_RESUME);
writel (temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
}
@@ -191,6 +192,7 @@
// what happens if HCS_N_CC(params) == 0 ?
port_status |= PORT_OWNER;
+ port_status &= ~PORT_RWC_BITS;
writel (port_status, &ehci->regs->port_status [index]);
} else
@@ -233,7 +235,8 @@
if (temp & PORT_OWNER) {
/* don't report this in GetPortStatus */
if (temp & PORT_CSC) {
- temp &= ~PORT_CSC;
+ temp &= ~PORT_RWC_BITS;
+ temp |= PORT_CSC;
writel (temp, &ehci->regs->port_status [i]);
}
continue;
@@ -343,7 +346,7 @@
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_ENABLE:
- writel (temp | PORT_PEC,
+ writel((temp & ~PORT_RWC_BITS) | PORT_PEC,
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_SUSPEND:
@@ -353,7 +356,8 @@
if ((temp & PORT_PE) == 0)
goto error;
/* resume signaling for 20 msec */
- writel ((temp & ~PORT_WAKE_BITS) | PORT_RESUME,
+ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+ writel (temp | PORT_RESUME,
&ehci->regs->port_status [wIndex]);
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (20);
@@ -364,15 +368,15 @@
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
- writel (temp & ~PORT_POWER,
+ writel (temp & ~(PORT_RWC_BITS | PORT_POWER),
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_CONNECTION:
- writel (temp | PORT_CSC,
+ writel((temp & ~PORT_RWC_BITS) | PORT_CSC,
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
- writel (temp | PORT_OCC,
+ writel((temp & ~PORT_RWC_BITS) | PORT_OCC,
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_RESET:
@@ -416,7 +420,7 @@
/* stop resume signaling */
temp = readl (&ehci->regs->port_status [wIndex]);
- writel (temp & ~PORT_RESUME,
+ writel (temp & ~(PORT_RWC_BITS | PORT_RESUME),
&ehci->regs->port_status [wIndex]);
retval = handshake (
&ehci->regs->port_status [wIndex],
@@ -437,7 +441,7 @@
ehci->reset_done [wIndex] = 0;
/* force reset to complete */
- writel (temp & ~PORT_RESET,
+ writel (temp & ~(PORT_RWC_BITS | PORT_RESET),
&ehci->regs->port_status [wIndex]);
/* REVISIT: some hardware needs 550+ usec to clear
* this bit; seems too long to spin routinely...
@@ -500,6 +504,7 @@
if (temp & PORT_OWNER)
break;
+ temp &= ~PORT_RWC_BITS;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
if ((temp & PORT_PE) == 0
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 20c9b55..f34a051 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -263,6 +263,7 @@
#define PORT_PE (1<<2) /* port enable */
#define PORT_CSC (1<<1) /* connect status change */
#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
} __attribute__ ((packed));
/* Appendix C, Debug port ... intended for use with special "debug devices"
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 447f488..7924c74 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -228,23 +228,22 @@
char **next,
unsigned *size)
{
- u32 temp, ndp, i;
+ u32 temp, i;
temp = roothub_a (controller);
if (temp == ~(u32)0)
return;
- ndp = (temp & RH_A_NDP);
if (verbose) {
ohci_dbg_sw (controller, next, size,
- "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d\n", temp,
+ "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\n", temp,
((temp & RH_A_POTPGT) >> 24) & 0xff,
(temp & RH_A_NOCP) ? " NOCP" : "",
(temp & RH_A_OCPM) ? " OCPM" : "",
(temp & RH_A_DT) ? " DT" : "",
(temp & RH_A_NPS) ? " NPS" : "",
(temp & RH_A_PSM) ? " PSM" : "",
- ndp
+ (temp & RH_A_NDP), controller->num_ports
);
temp = roothub_b (controller);
ohci_dbg_sw (controller, next, size,
@@ -266,7 +265,7 @@
);
}
- for (i = 0; i < ndp; i++) {
+ for (i = 0; i < controller->num_ports; i++) {
temp = roothub_portstatus (controller, i);
dbg_port_sw (controller, i, temp, next, size);
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 56b43f2..67c1aa5 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -382,8 +382,7 @@
goto sanitize;
}
spin_unlock_irqrestore (&ohci->lock, flags);
- set_current_state (TASK_UNINTERRUPTIBLE);
- schedule_timeout (1);
+ schedule_timeout_uninterruptible(1);
goto rescan;
case ED_IDLE: /* fully unlinked */
if (list_empty (&ed->td_list)) {
@@ -485,6 +484,10 @@
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
+ /* Read the number of ports unless overridden */
+ if (ohci->num_ports == 0)
+ ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
+
if (ohci->hcca)
return 0;
@@ -561,10 +564,8 @@
msleep(temp);
temp = roothub_a (ohci);
if (!(temp & RH_A_NPS)) {
- unsigned ports = temp & RH_A_NDP;
-
/* power down each port */
- for (temp = 0; temp < ports; temp++)
+ for (temp = 0; temp < ohci->num_ports; temp++)
ohci_writel (ohci, RH_PS_LSDA,
&ohci->regs->roothub.portstatus [temp]);
}
@@ -720,6 +721,7 @@
if (ints & OHCI_INTR_RD) {
ohci_vdbg (ohci, "resume detect\n");
+ ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus);
if (hcd->state != HC_STATE_QUIESCING)
schedule_work(&ohci->rh_resume);
}
@@ -861,7 +863,7 @@
* and that if we try to turn them back on the root hub
* will respond to CSC processing.
*/
- i = roothub_a (ohci) & RH_A_NDP;
+ i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [temp]);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 83ca454..ce7b28d 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -184,7 +184,7 @@
if (status != -EINPROGRESS)
return status;
- temp = roothub_a (ohci) & RH_A_NDP;
+ temp = ohci->num_ports;
enables = 0;
while (temp--) {
u32 stat = ohci_readl (ohci,
@@ -304,7 +304,7 @@
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports, i, changed = 0, length = 1;
+ int i, changed = 0, length = 1;
int can_suspend = hcd->can_wakeup;
unsigned long flags;
@@ -319,9 +319,10 @@
goto done;
}
- ports = roothub_a (ohci) & RH_A_NDP;
- if (ports > MAX_ROOT_PORTS) {
- ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n", ports,
+ /* undocumented erratum seen on at least rev D */
+ if ((ohci->flags & OHCI_QUIRK_AMD756)
+ && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
+ ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
/* retry later; "should not happen" */
goto done;
@@ -332,13 +333,13 @@
buf [0] = changed = 1;
else
buf [0] = 0;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
buf [1] = 0;
length++;
}
/* look at each port */
- for (i = 0; i < ports; i++) {
+ for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
@@ -395,15 +396,14 @@
struct usb_hub_descriptor *desc
) {
u32 rh = roothub_a (ohci);
- int ports = rh & RH_A_NDP;
u16 temp;
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
desc->bHubContrCurrent = 0;
- desc->bNbrPorts = ports;
- temp = 1 + (ports / 8);
+ desc->bNbrPorts = ohci->num_ports;
+ temp = 1 + (ohci->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
temp = 0;
@@ -421,7 +421,7 @@
rh = roothub_b (ohci);
memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
desc->bitmap [0] = rh & RH_B_DR;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
desc->bitmap [1] = (rh & RH_B_DR) >> 8;
desc->bitmap [2] = 0xff;
} else
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e5bc178..2fdb262 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -75,33 +75,6 @@
return 0;
}
-/*
- If you select PMM_PERPORT_MODE, you should set the port power
- */
-static int pxa27x_ohci_set_port_power( int port )
-{
- if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE)
- && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) {
- UHCRHPS(port) |= 0x100;
- return 0;
- }
- return -1;
-}
-
-/*
- If you select PMM_PERPORT_MODE, you should set the port power
- */
-static int pxa27x_ohci_clear_port_power( int port )
-{
- if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE)
- && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) {
- UHCRHPS(port) |= 0x200;
- return 0;
- }
-
- return -1;
-}
-
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
@@ -130,11 +103,17 @@
Polarity Low to active low. Supply power to USB ports. */
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ pxa27x_ohci_pmm_state = PMM_PERPORT_MODE;
}
UHCHR &= ~UHCHR_SSE;
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+
+ /* Clear any OTG Pin Hold */
+ if (PSSR & PSSR_OTGPH)
+ PSSR |= PSSR_OTGPH;
}
static void pxa27x_stop_hc(struct platform_device *dev)
@@ -198,17 +177,7 @@
pxa27x_start_hc(dev);
/* Select Power Management Mode */
- pxa27x_ohci_select_pmm( PMM_PERPORT_MODE );
-
- /* If choosing PMM_PERPORT_MODE, we should set the port power before we use it. */
- if (pxa27x_ohci_set_port_power(1) < 0)
- printk(KERN_ERR "Setting port 1 power failed.\n");
-
- if (pxa27x_ohci_clear_port_power(2) < 0)
- printk(KERN_ERR "Setting port 2 power failed.\n");
-
- if (pxa27x_ohci_clear_port_power(3) < 0)
- printk(KERN_ERR "Setting port 3 power failed.\n");
+ pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -258,6 +227,9 @@
ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
+ /* The value of NDP in roothub_a is incorrect on this hardware */
+ ohci->num_ports = 3;
+
if ((ret = ohci_init(ohci)) < 0)
return ret;
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 71cdd22..8a9b9d9 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -383,6 +383,7 @@
/*
* driver state
*/
+ int num_ports;
int load [NUM_INTS];
u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 0d5d254..0c02489 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -97,14 +97,9 @@
/* to make sure it doesn't hog all of the bandwidth */
#define DEPTH_INTERVAL 5
-static inline void restart_timer(struct uhci_hcd *uhci)
-{
- mod_timer(&uhci->stall_timer, jiffies + msecs_to_jiffies(100));
-}
-
-#include "uhci-hub.c"
#include "uhci-debug.c"
#include "uhci-q.c"
+#include "uhci-hub.c"
/*
* Make sure the controller is completely inactive, unable to
@@ -160,7 +155,6 @@
{
reset_hc(uhci);
uhci->hc_inaccessible = 1;
- del_timer(&uhci->stall_timer);
}
/*
@@ -287,8 +281,11 @@
/* Enable resume-detect interrupts if they work.
* Then enter Global Suspend mode, still configured.
*/
- int_enable = (resume_detect_interrupts_are_broken(uhci) ?
- 0 : USBINTR_RESUME);
+ uhci->working_RD = 1;
+ int_enable = USBINTR_RESUME;
+ if (resume_detect_interrupts_are_broken(uhci)) {
+ uhci->working_RD = int_enable = 0;
+ }
outw(int_enable, uhci->io_addr + USBINTR);
outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD);
mb();
@@ -315,7 +312,6 @@
uhci->rh_state = new_state;
uhci->is_stopped = UHCI_IS_STOPPED;
- del_timer(&uhci->stall_timer);
uhci_to_hcd(uhci)->poll_rh = !int_enable;
uhci_scan_schedule(uhci, NULL);
@@ -335,7 +331,6 @@
mb();
uhci->rh_state = UHCI_RH_RUNNING;
uhci_to_hcd(uhci)->poll_rh = 1;
- restart_timer(uhci);
}
static void wakeup_rh(struct uhci_hcd *uhci)
@@ -374,20 +369,6 @@
mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
}
-static void stall_callback(unsigned long _uhci)
-{
- struct uhci_hcd *uhci = (struct uhci_hcd *) _uhci;
- unsigned long flags;
-
- spin_lock_irqsave(&uhci->lock, flags);
- uhci_scan_schedule(uhci, NULL);
- check_fsbr(uhci);
-
- if (!uhci->is_stopped)
- restart_timer(uhci);
- spin_unlock_irqrestore(&uhci->lock, flags);
-}
-
static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
@@ -418,8 +399,10 @@
"host controller halted, "
"very bad!\n");
hc_died(uhci);
- spin_unlock_irqrestore(&uhci->lock, flags);
- return IRQ_HANDLED;
+
+ /* Force a callback in case there are
+ * pending unlinks */
+ mod_timer(&hcd->rh_timer, jiffies);
}
spin_unlock_irqrestore(&uhci->lock, flags);
}
@@ -427,10 +410,11 @@
if (status & USBSTS_RD)
usb_hcd_poll_rh_status(hcd);
-
- spin_lock_irqsave(&uhci->lock, flags);
- uhci_scan_schedule(uhci, regs);
- spin_unlock_irqrestore(&uhci->lock, flags);
+ else {
+ spin_lock_irqsave(&uhci->lock, flags);
+ uhci_scan_schedule(uhci, regs);
+ spin_unlock_irqrestore(&uhci->lock, flags);
+ }
return IRQ_HANDLED;
}
@@ -595,10 +579,6 @@
init_waitqueue_head(&uhci->waitqh);
- init_timer(&uhci->stall_timer);
- uhci->stall_timer.function = stall_callback;
- uhci->stall_timer.data = (unsigned long) uhci;
-
uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
&dma_handle, 0);
if (!uhci->fl) {
@@ -745,11 +725,11 @@
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
spin_lock_irq(&uhci->lock);
- reset_hc(uhci);
+ if (!uhci->hc_inaccessible)
+ reset_hc(uhci);
uhci_scan_schedule(uhci, NULL);
spin_unlock_irq(&uhci->lock);
- del_timer_sync(&uhci->stall_timer);
release_uhci(uhci);
}
@@ -811,13 +791,12 @@
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
uhci->hc_inaccessible = 1;
+ hcd->poll_rh = 0;
/* FIXME: Enable non-PME# remote wakeup? */
done:
spin_unlock_irq(&uhci->lock);
- if (rc == 0)
- del_timer_sync(&hcd->rh_timer);
return rc;
}
@@ -850,8 +829,11 @@
spin_unlock_irq(&uhci->lock);
- if (hcd->poll_rh)
+ if (!uhci->working_RD) {
+ /* Suspended root hub needs to be polled */
+ hcd->poll_rh = 1;
usb_hcd_poll_rh_status(hcd);
+ }
return 0;
}
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index bf9c5f9..282f40b 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -345,9 +345,6 @@
/*
* This describes the full uhci information.
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs.
*/
struct uhci_hcd {
@@ -360,8 +357,6 @@
struct dma_pool *qh_pool;
struct dma_pool *td_pool;
- struct usb_bus *bus;
-
struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
@@ -380,6 +375,8 @@
unsigned int scan_in_progress:1; /* Schedule scan is running */
unsigned int need_rescan:1; /* Redo the schedule scan */
unsigned int hc_inaccessible:1; /* HC is suspended or dead */
+ unsigned int working_RD:1; /* Suspended root hub doesn't
+ need to be polled */
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
@@ -405,9 +402,7 @@
/* List of URB's awaiting completion callback */
struct list_head complete_list; /* P: uhci->lock */
- int rh_numports;
-
- struct timer_list stall_timer;
+ int rh_numports; /* Number of root-hub ports */
wait_queue_head_t waitqh; /* endpoint_disable waiters */
};
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 4eace2b..a71e48a 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -145,15 +145,16 @@
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned long flags;
- int status;
+ int status = 0;
spin_lock_irqsave(&uhci->lock, flags);
- if (uhci->hc_inaccessible) {
- status = 0;
- goto done;
- }
+ uhci_scan_schedule(uhci, NULL);
+ if (uhci->hc_inaccessible)
+ goto done;
+ check_fsbr(uhci);
uhci_check_ports(uhci);
+
status = get_hub_status_data(uhci, buf);
switch (uhci->rh_state) {
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index bbb36cd..ea0d168 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -33,7 +33,7 @@
static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
{
if (uhci->is_stopped)
- mod_timer(&uhci->stall_timer, jiffies);
+ mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
}
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 482c4be..1e53934 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -286,3 +286,23 @@
To compile this driver as a module, choose M here: the module will
be called keyspan_remote.
+
+config USB_APPLETOUCH
+ tristate "Apple USB Touchpad support"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use an Apple USB Touchpad.
+
+ These are the touchpads that can be found on post-February 2005
+ Apple Powerbooks (prior models have a Synaptics touchpad connected
+ to the ADB bus).
+
+ This driver provides a basic mouse driver but can be interfaced
+ with the synaptics X11 driver to provide acceleration and
+ scrolling in X11.
+
+ For further information, see
+ <file:Documentation/input/appletouch.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called appletouch.
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 43b2f99..5e03b93 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -41,3 +41,4 @@
obj-$(CONFIG_USB_ACECAD) += acecad.o
obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
+obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c
new file mode 100644
index 0000000..e03c1c5
--- /dev/null
+++ b/drivers/usb/input/appletouch.c
@@ -0,0 +1,469 @@
+/*
+ * Apple USB Touchpad (for post-February 2005 PowerBooks) driver
+ *
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ *
+ * Thanks to Alex Harper <basilisk@foobox.net> for his inputs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/usb_input.h>
+
+/* Apple has powerbooks which have the keyboard with different Product IDs */
+#define APPLE_VENDOR_ID 0x05AC
+
+#define ATP_DEVICE(prod) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS | \
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
+ .idVendor = APPLE_VENDOR_ID, \
+ .idProduct = (prod), \
+ .bInterfaceClass = 0x03, \
+ .bInterfaceProtocol = 0x02
+
+/* table of devices that work with this driver */
+static struct usb_device_id atp_table [] = {
+ { ATP_DEVICE(0x020E) },
+ { ATP_DEVICE(0x020F) },
+ { ATP_DEVICE(0x030A) },
+ { ATP_DEVICE(0x030B) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE (usb, atp_table);
+
+/* size of a USB urb transfer */
+#define ATP_DATASIZE 81
+
+/*
+ * number of sensors. Note that only 16 instead of 26 X (horizontal)
+ * sensors exist on 12" and 15" PowerBooks. All models have 16 Y
+ * (vertical) sensors.
+ */
+#define ATP_XSENSORS 26
+#define ATP_YSENSORS 16
+
+/* amount of fuzz this touchpad generates */
+#define ATP_FUZZ 16
+
+/* maximum pressure this driver will report */
+#define ATP_PRESSURE 300
+/*
+ * multiplication factor for the X and Y coordinates.
+ * We try to keep the touchpad aspect ratio while still doing only simple
+ * arithmetics.
+ * The factors below give coordinates like:
+ * 0 <= x < 960 on 12" and 15" Powerbooks
+ * 0 <= x < 1600 on 17" Powerbooks
+ * 0 <= y < 646
+ */
+#define ATP_XFACT 64
+#define ATP_YFACT 43
+
+/*
+ * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is
+ * ignored.
+ */
+#define ATP_THRESHOLD 5
+
+/* Structure to hold all of our device specific stuff */
+struct atp {
+ struct usb_device * udev; /* usb device */
+ struct urb * urb; /* usb request block */
+ signed char * data; /* transferred data */
+ int open; /* non-zero if opened */
+ struct input_dev input; /* input dev */
+ int valid; /* are the sensors valid ? */
+ int x_old; /* last reported x/y, */
+ int y_old; /* used for smoothing */
+ /* current value of the sensors */
+ signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS];
+ /* last value of the sensors */
+ signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
+ /* accumulated sensors */
+ int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
+};
+
+#define dbg_dump(msg, tab) \
+ if (debug > 1) { \
+ int i; \
+ printk("appletouch: %s %lld", msg, (long long)jiffies); \
+ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \
+ printk(" %02x", tab[i]); \
+ printk("\n"); \
+ }
+
+#define dprintk(format, a...) \
+ do { \
+ if (debug) printk(format, ##a); \
+ } while (0)
+
+MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold");
+MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
+MODULE_LICENSE("GPL");
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
+ int *z, int *fingers)
+{
+ int i;
+ /* values to calculate mean */
+ int pcum = 0, psum = 0;
+
+ *fingers = 0;
+
+ for (i = 0; i < nb_sensors; i++) {
+ if (xy_sensors[i] < ATP_THRESHOLD)
+ continue;
+ if ((i - 1 < 0) || (xy_sensors[i - 1] < ATP_THRESHOLD))
+ (*fingers)++;
+ pcum += xy_sensors[i] * i;
+ psum += xy_sensors[i];
+ }
+
+ if (psum > 0) {
+ *z = psum;
+ return pcum * fact / psum;
+ }
+
+ return 0;
+}
+
+static inline void atp_report_fingers(struct input_dev *input, int fingers)
+{
+ input_report_key(input, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
+}
+
+static void atp_complete(struct urb* urb, struct pt_regs* regs)
+{
+ int x, y, x_z, y_z, x_f, y_f;
+ int retval, i;
+ struct atp *dev = urb->context;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* This urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ /* drop incomplete datasets */
+ if (dev->urb->actual_length != ATP_DATASIZE) {
+ dprintk("appletouch: incomplete data package.\n");
+ goto exit;
+ }
+
+ /* reorder the sensors values */
+ for (i = 0; i < 8; i++) {
+ /* X values */
+ dev->xy_cur[i ] = dev->data[5 * i + 2];
+ dev->xy_cur[i + 8] = dev->data[5 * i + 4];
+ dev->xy_cur[i + 16] = dev->data[5 * i + 42];
+ if (i < 2)
+ dev->xy_cur[i + 24] = dev->data[5 * i + 44];
+
+ /* Y values */
+ dev->xy_cur[i + 26] = dev->data[5 * i + 1];
+ dev->xy_cur[i + 34] = dev->data[5 * i + 3];
+ }
+
+ dbg_dump("sample", dev->xy_cur);
+
+ if (!dev->valid) {
+ /* first sample */
+ dev->valid = 1;
+ dev->x_old = dev->y_old = -1;
+ memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
+
+ /* 17" Powerbooks have 10 extra X sensors */
+ for (i = 16; i < ATP_XSENSORS; i++)
+ if (dev->xy_cur[i]) {
+ printk("appletouch: 17\" model detected.\n");
+ input_set_abs_params(&dev->input, ABS_X, 0,
+ (ATP_XSENSORS - 1) *
+ ATP_XFACT - 1,
+ ATP_FUZZ, 0);
+ break;
+ }
+
+ goto exit;
+ }
+
+ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
+ /* accumulate the change */
+ signed char change = dev->xy_old[i] - dev->xy_cur[i];
+ dev->xy_acc[i] -= change;
+
+ /* prevent down drifting */
+ if (dev->xy_acc[i] < 0)
+ dev->xy_acc[i] = 0;
+ }
+
+ memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
+
+ dbg_dump("accumulator", dev->xy_acc);
+
+ x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
+ ATP_XFACT, &x_z, &x_f);
+ y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
+ ATP_YFACT, &y_z, &y_f);
+
+ if (x && y) {
+ if (dev->x_old != -1) {
+ x = (dev->x_old * 3 + x) >> 2;
+ y = (dev->y_old * 3 + y) >> 2;
+ dev->x_old = x;
+ dev->y_old = y;
+
+ if (debug > 1)
+ printk("appletouch: X: %3d Y: %3d "
+ "Xz: %3d Yz: %3d\n",
+ x, y, x_z, y_z);
+
+ input_report_key(&dev->input, BTN_TOUCH, 1);
+ input_report_abs(&dev->input, ABS_X, x);
+ input_report_abs(&dev->input, ABS_Y, y);
+ input_report_abs(&dev->input, ABS_PRESSURE,
+ min(ATP_PRESSURE, x_z + y_z));
+ atp_report_fingers(&dev->input, max(x_f, y_f));
+ }
+ dev->x_old = x;
+ dev->y_old = y;
+ }
+ else if (!x && !y) {
+
+ dev->x_old = dev->y_old = -1;
+ input_report_key(&dev->input, BTN_TOUCH, 0);
+ input_report_abs(&dev->input, ABS_PRESSURE, 0);
+ atp_report_fingers(&dev->input, 0);
+
+ /* reset the accumulator on release */
+ memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
+ }
+
+ input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]);
+
+ input_sync(&dev->input);
+
+exit:
+ retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+ if (retval) {
+ err("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+ }
+}
+
+static int atp_open(struct input_dev *input)
+{
+ struct atp *dev = input->private;
+
+ if (usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ dev->open = 1;
+ return 0;
+}
+
+static void atp_close(struct input_dev *input)
+{
+ struct atp *dev = input->private;
+
+ usb_kill_urb(dev->urb);
+ dev->open = 0;
+}
+
+static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
+{
+ struct atp *dev = NULL;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ int int_in_endpointAddr = 0;
+ int i, retval = -ENOMEM;
+
+ /* allocate memory for our device state and initialize it */
+ dev = kmalloc(sizeof(struct atp), GFP_KERNEL);
+ if (dev == NULL) {
+ err("Out of memory");
+ goto err_kmalloc;
+ }
+ memset(dev, 0, sizeof(struct atp));
+
+ dev->udev = interface_to_usbdev(iface);
+
+ /* set up the endpoint information */
+ /* use only the first interrupt-in endpoint */
+ iface_desc = iface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (!int_in_endpointAddr &&
+ (endpoint->bEndpointAddress & USB_DIR_IN) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT)) {
+ /* we found an interrupt in endpoint */
+ int_in_endpointAddr = endpoint->bEndpointAddress;
+ break;
+ }
+ }
+ if (!int_in_endpointAddr) {
+ retval = -EIO;
+ err("Could not find int-in endpoint");
+ goto err_endpoint;
+ }
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
+
+ dev->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->urb) {
+ retval = -ENOMEM;
+ goto err_usballoc;
+ }
+ dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL,
+ &dev->urb->transfer_dma);
+ if (!dev->data) {
+ retval = -ENOMEM;
+ goto err_usbbufalloc;
+ }
+ usb_fill_int_urb(dev->urb, dev->udev,
+ usb_rcvintpipe(dev->udev, int_in_endpointAddr),
+ dev->data, ATP_DATASIZE, atp_complete, dev, 1);
+
+ init_input_dev(&dev->input);
+ dev->input.name = "appletouch";
+ dev->input.dev = &iface->dev;
+ dev->input.private = dev;
+ dev->input.open = atp_open;
+ dev->input.close = atp_close;
+
+ usb_to_input_id(dev->udev, &dev->input.id);
+
+ set_bit(EV_ABS, dev->input.evbit);
+
+ /*
+ * 12" and 15" Powerbooks only have 16 x sensors,
+ * 17" models are detected later.
+ */
+ input_set_abs_params(&dev->input, ABS_X, 0,
+ (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
+ input_set_abs_params(&dev->input, ABS_Y, 0,
+ (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+ input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
+
+ set_bit(EV_KEY, dev->input.evbit);
+ set_bit(BTN_TOUCH, dev->input.keybit);
+ set_bit(BTN_TOOL_FINGER, dev->input.keybit);
+ set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit);
+ set_bit(BTN_LEFT, dev->input.keybit);
+
+ input_register_device(&dev->input);
+
+ printk(KERN_INFO "input: appletouch connected\n");
+
+ return 0;
+
+err_usbbufalloc:
+ usb_free_urb(dev->urb);
+err_usballoc:
+ usb_set_intfdata(iface, NULL);
+err_endpoint:
+ kfree(dev);
+err_kmalloc:
+ return retval;
+}
+
+static void atp_disconnect(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+
+ usb_set_intfdata(iface, NULL);
+ if (dev) {
+ usb_kill_urb(dev->urb);
+ input_unregister_device(&dev->input);
+ usb_free_urb(dev->urb);
+ usb_buffer_free(dev->udev, ATP_DATASIZE,
+ dev->data, dev->urb->transfer_dma);
+ kfree(dev);
+ }
+ printk(KERN_INFO "input: appletouch disconnected\n");
+}
+
+static int atp_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+ usb_kill_urb(dev->urb);
+ dev->valid = 0;
+ return 0;
+}
+
+static int atp_resume(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+ if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ return 0;
+}
+
+static struct usb_driver atp_driver = {
+ .owner = THIS_MODULE,
+ .name = "appletouch",
+ .probe = atp_probe,
+ .disconnect = atp_disconnect,
+ .suspend = atp_suspend,
+ .resume = atp_resume,
+ .id_table = atp_table,
+};
+
+static int __init atp_init(void)
+{
+ return usb_register(&atp_driver);
+}
+
+static void __exit atp_exit(void)
+{
+ usb_deregister(&atp_driver);
+}
+
+module_init(atp_init);
+module_exit(atp_exit);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index e108e0a..a99865c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1446,7 +1446,6 @@
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304
-#define USB_DEVICE_ID_APPLE_BLUETOOTH 0x1000
/*
* Alphabetically sorted blacklist by quirk type.
@@ -1465,7 +1464,6 @@
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_BLUETOOTH, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 3957e14..7603cbe 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -4,11 +4,43 @@
depends on USB && USB_EHCI_HCD
---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
- Net2280 and a SiS315 chip.
-
- Note that this device requires a USB 2.0 host controller. It will not
+ Net2280 and a SiS315 chip.
+
+ Note that this device requires a USB 2.0 host controller. It will not
work with USB 1.x controllers.
- To compile this driver as a module, choose M here: the module will be
- called sisusb. If unsure, say N.
+ To compile this driver as a module, choose M here; the module will be
+ called sisusbvga. If unsure, say N.
+
+config USB_SISUSBVGA_CON
+ bool "Text console and mode switching support" if USB_SISUSBVGA
+ depends on VT
+ select FONT_8x16
+ ---help---
+ Say Y here if you want a VGA text console via the USB dongle or
+ want to support userland applications that utilize the driver's
+ display mode switching capabilities.
+
+ Note that this console supports VGA/EGA text mode only.
+
+ By default, the console part of the driver will not kick in when
+ the driver is initialized. If you want the driver to take over
+ one or more of the consoles, you need to specify the number of
+ the first and last consoles (starting at 1) as driver parameters.
+
+ For example, if the driver is compiled as a module:
+
+ modprobe sisusbvga first=1 last=5
+
+ If you use hotplug, add this to your modutils config files with
+ the "options" keyword, such as eg.
+
+ options sisusbvga first=1 last=5
+
+ If the driver is compiled into the kernel image, the parameters
+ must be given in the kernel command like, such as
+
+ sisusbvga.first=1 sisusbvga.last=5
+
+
diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile
index 76f1643..7f934cf 100644
--- a/drivers/usb/misc/sisusbvga/Makefile
+++ b/drivers/usb/misc/sisusbvga/Makefile
@@ -2,5 +2,7 @@
# Makefile for the sisusb driver (if driver is inside kernel tree).
#
-obj-$(CONFIG_USB_SISUSBVGA) += sisusb.o
+obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o
+
+sisusbvga-objs := sisusb.o sisusb_init.o sisusb_con.o
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index d63ce6c..39db315 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -1,6 +1,8 @@
/*
* sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
*
+ * Main part
+ *
* Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
*
* If distributed as part of the Linux kernel, this code is licensed under the
@@ -48,16 +50,60 @@
#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
#include "sisusb.h"
+#ifdef INCL_SISUSB_CON
+#include <linux/font.h>
+#endif
+
#define SISUSB_DONTSYNC
/* Forward declarations / clean-up routines */
+#ifdef INCL_SISUSB_CON
+int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
+int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data);
+int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data);
+int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data);
+int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand, u8 myor);
+int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, u8 index, u8 myor);
+int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand);
+
+int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data);
+int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data);
+int sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data);
+int sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data);
+int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
+ u32 dest, int length, size_t *bytes_written);
+
+int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init);
+
+extern int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
+extern int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
+
+extern void sisusb_init_concode(void);
+extern int sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last);
+extern void sisusb_console_exit(struct sisusb_usb_data *sisusb);
+
+extern void sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location);
+
+extern int sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
+ u8 *arg, int cmapsz, int ch512, int dorecalc,
+ struct vc_data *c, int fh, int uplock);
+
+static int sisusb_first_vc = 0;
+static int sisusb_last_vc = 0;
+module_param_named(first, sisusb_first_vc, int, 0);
+module_param_named(last, sisusb_last_vc, int, 0);
+MODULE_PARM_DESC(first, "Number of first console to take over (1 - MAX_NR_CONSOLES)");
+MODULE_PARM_DESC(last, "Number of last console to take over (1 - MAX_NR_CONSOLES)");
+#endif
+
static struct usb_driver sisusb_driver;
-static DECLARE_MUTEX(disconnect_sem);
+DECLARE_MUTEX(disconnect_sem);
static void
sisusb_free_buffers(struct sisusb_usb_data *sisusb)
@@ -639,7 +685,10 @@
/* The following routines assume being used to transfer byte, word,
* long etc.
- * This means that they assume "data" in machine endianness format.
+ * This means that
+ * - the write routines expect "data" in machine endianness format.
+ * The data will be converted to leXX in sisusb_xxx_packet.
+ * - the read routines can expect read data in machine-endianess.
*/
static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type,
@@ -839,7 +888,7 @@
if (get_user(swap16, (u16 __user *)userbuffer))
return -EFAULT;
} else
- swap16 = (kernbuffer[0] << 8) | kernbuffer[1];
+ swap16 = *((u16 *)kernbuffer);
ret = sisusb_write_memio_word(sisusb,
SISUSB_TYPE_MEM,
@@ -855,14 +904,25 @@
if (userbuffer) {
if (copy_from_user(&buf, userbuffer, 3))
return -EFAULT;
-
+#ifdef __BIG_ENDIAN
swap32 = (buf[0] << 16) |
(buf[1] << 8) |
buf[2];
+#else
+ swap32 = (buf[2] << 16) |
+ (buf[1] << 8) |
+ buf[0];
+#endif
} else
+#ifdef __BIG_ENDIAN
swap32 = (kernbuffer[0] << 16) |
(kernbuffer[1] << 8) |
kernbuffer[2];
+#else
+ swap32 = (kernbuffer[2] << 16) |
+ (kernbuffer[1] << 8) |
+ kernbuffer[0];
+#endif
ret = sisusb_write_memio_24bit(sisusb,
SISUSB_TYPE_MEM,
@@ -879,10 +939,7 @@
if (get_user(swap32, (u32 __user *)userbuffer))
return -EFAULT;
} else
- swap32 = (kernbuffer[0] << 24) |
- (kernbuffer[1] << 16) |
- (kernbuffer[2] << 8) |
- kernbuffer[3];
+ swap32 = *((u32 *)kernbuffer);
ret = sisusb_write_memio_long(sisusb,
SISUSB_TYPE_MEM,
@@ -1005,6 +1062,10 @@
return ret ? -EIO : 0;
}
+/* Remember: Read data in packet is in machine-endianess! So for
+ * byte, word, 24bit, long no endian correction is necessary.
+ */
+
static int sisusb_read_memio_byte(struct sisusb_usb_data *sisusb, int type,
u32 addr, u8 *data)
{
@@ -1191,8 +1252,7 @@
(u16 __user *)userbuffer))
return -EFAULT;
} else {
- kernbuffer[0] = swap16 >> 8;
- kernbuffer[1] = swap16 & 0xff;
+ *((u16 *)kernbuffer) = swap16;
}
}
return ret;
@@ -1202,9 +1262,15 @@
addr, &swap32);
if (!ret) {
(*bytes_read) += 3;
+#ifdef __BIG_ENDIAN
buf[0] = (swap32 >> 16) & 0xff;
buf[1] = (swap32 >> 8) & 0xff;
buf[2] = swap32 & 0xff;
+#else
+ buf[2] = (swap32 >> 16) & 0xff;
+ buf[1] = (swap32 >> 8) & 0xff;
+ buf[0] = swap32 & 0xff;
+#endif
if (userbuffer) {
if (copy_to_user(userbuffer, &buf[0], 3))
return -EFAULT;
@@ -1228,10 +1294,7 @@
userbuffer += 4;
} else {
- kernbuffer[0] = (swap32 >> 24) & 0xff;
- kernbuffer[1] = (swap32 >> 16) & 0xff;
- kernbuffer[2] = (swap32 >> 8) & 0xff;
- kernbuffer[3] = swap32 & 0xff;
+ *((u32 *)kernbuffer) = swap32;
kernbuffer += 4;
}
addr += 4;
@@ -1289,7 +1352,24 @@
/* High level: Gfx (indexed) register access */
-static int
+#ifdef INCL_SISUSB_CON
+int
+sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
+{
+ return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
+}
+
+int
+sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
+{
+ return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
+}
+#endif
+
+#ifndef INCL_SISUSB_CON
+static
+#endif
+int
sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data)
{
int ret;
@@ -1298,7 +1378,10 @@
return ret;
}
-static int
+#ifndef INCL_SISUSB_CON
+static
+#endif
+int
sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data)
{
int ret;
@@ -1307,7 +1390,10 @@
return ret;
}
-static int
+#ifndef INCL_SISUSB_CON
+static
+#endif
+int
sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
u8 myand, u8 myor)
{
@@ -1336,18 +1422,89 @@
return ret;
}
-static int
+#ifndef INCL_SISUSB_CON
+static
+#endif
+int
sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, u8 index, u8 myor)
{
return(sisusb_setidxregandor(sisusb, port, index, 0xff, myor));
}
-static int
+#ifndef INCL_SISUSB_CON
+static
+#endif
+int
sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand)
{
return(sisusb_setidxregandor(sisusb, port, idx, myand, 0x00));
}
+/* Write/read video ram */
+
+#ifdef INCL_SISUSB_CON
+int
+sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data)
+{
+ return(sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
+}
+
+int
+sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
+{
+ return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
+}
+
+int
+sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data)
+{
+ return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
+}
+
+int
+sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data)
+{
+ return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
+}
+
+int
+sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
+ u32 dest, int length, size_t *bytes_written)
+{
+ return(sisusb_write_mem_bulk(sisusb, dest, src, length, NULL, 0, bytes_written));
+}
+
+#ifdef SISUSBENDIANTEST
+int
+sisusb_read_memory(struct sisusb_usb_data *sisusb, char *dest,
+ u32 src, int length, size_t *bytes_written)
+{
+ return(sisusb_read_mem_bulk(sisusb, src, dest, length, NULL, bytes_written));
+}
+#endif
+#endif
+
+#ifdef SISUSBENDIANTEST
+static void
+sisusb_testreadwrite(struct sisusb_usb_data *sisusb)
+{
+ static char srcbuffer[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 };
+ char destbuffer[10];
+ size_t dummy;
+ int i,j;
+
+ sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7, &dummy);
+
+ for(i = 1; i <= 7; i++) {
+ printk(KERN_DEBUG "sisusb: rwtest %d bytes\n", i);
+ sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i, &dummy);
+ for(j = 0; j < i; j++) {
+ printk(KERN_DEBUG "sisusb: rwtest read[%d] = %x\n", j, destbuffer[j]);
+ }
+ }
+}
+#endif
+
/* access pci config registers (reg numbers 0, 4, 8, etc) */
static int
@@ -2270,6 +2427,129 @@
return ret;
}
+
+#ifdef INCL_SISUSB_CON
+
+/* Set up default text mode:
+ - Set text mode (0x03)
+ - Upload default font
+ - Upload user font (if available)
+*/
+
+int
+sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
+{
+ int ret = 0, slot = sisusb->font_slot, i;
+ struct font_desc *myfont;
+ u8 *tempbuf;
+ u16 *tempbufb;
+ size_t written;
+ static char bootstring[] = "SiSUSB VGA text console, (C) 2005 Thomas Winischhofer.";
+ static char bootlogo[] = "(o_ //\\ V_/_";
+
+ /* sisusb->lock is down */
+
+ if (!sisusb->SiS_Pr)
+ return 1;
+
+ sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
+ sisusb->SiS_Pr->sisusb = (void *)sisusb;
+
+ /* Set mode 0x03 */
+ SiSUSBSetMode(sisusb->SiS_Pr, 0x03);
+
+ if (!(myfont = find_font("VGA8x16")))
+ return 1;
+
+ if (!(tempbuf = vmalloc(8192)))
+ return 1;
+
+ for (i = 0; i < 256; i++)
+ memcpy(tempbuf + (i * 32), myfont->data + (i * 16), 16);
+
+ /* Upload default font */
+ ret = sisusbcon_do_font_op(sisusb, 1, 0, tempbuf, 8192, 0, 1, NULL, 16, 0);
+
+ vfree(tempbuf);
+
+ /* Upload user font (and reset current slot) */
+ if (sisusb->font_backup) {
+ ret |= sisusbcon_do_font_op(sisusb, 1, 2, sisusb->font_backup,
+ 8192, sisusb->font_backup_512, 1, NULL,
+ sisusb->font_backup_height, 0);
+ if (slot != 2)
+ sisusbcon_do_font_op(sisusb, 1, 0, NULL, 0, 0, 1,
+ NULL, 16, 0);
+ }
+
+ if (init && !sisusb->scrbuf) {
+
+ if ((tempbuf = vmalloc(8192))) {
+
+ i = 4096;
+ tempbufb = (u16 *)tempbuf;
+ while (i--)
+ *(tempbufb++) = 0x0720;
+
+ i = 0;
+ tempbufb = (u16 *)tempbuf;
+ while (bootlogo[i]) {
+ *(tempbufb++) = 0x0700 | bootlogo[i++];
+ if (!(i % 4))
+ tempbufb += 76;
+ }
+
+ i = 0;
+ tempbufb = (u16 *)tempbuf + 6;
+ while (bootstring[i])
+ *(tempbufb++) = 0x0700 | bootstring[i++];
+
+ ret |= sisusb_copy_memory(sisusb, tempbuf,
+ sisusb->vrambase, 8192, &written);
+
+ vfree(tempbuf);
+
+ }
+
+ } else if (sisusb->scrbuf) {
+
+ ret |= sisusb_copy_memory(sisusb, (char *)sisusb->scrbuf,
+ sisusb->vrambase, sisusb->scrbuf_size, &written);
+
+ }
+
+ if (sisusb->sisusb_cursor_size_from >= 0 &&
+ sisusb->sisusb_cursor_size_to >= 0) {
+ sisusb_setidxreg(sisusb, SISCR, 0x0a,
+ sisusb->sisusb_cursor_size_from);
+ sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0,
+ sisusb->sisusb_cursor_size_to);
+ } else {
+ sisusb_setidxreg(sisusb, SISCR, 0x0a, 0x2d);
+ sisusb_setidxreg(sisusb, SISCR, 0x0b, 0x0e);
+ sisusb->sisusb_cursor_size_to = -1;
+ }
+
+ slot = sisusb->sisusb_cursor_loc;
+ if(slot < 0) slot = 0;
+
+ sisusb->sisusb_cursor_loc = -1;
+ sisusb->bad_cursor_pos = 1;
+
+ sisusb_set_cursor(sisusb, slot);
+
+ sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8));
+ sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff));
+
+ sisusb->textmodedestroyed = 0;
+
+ /* sisusb->lock is down */
+
+ return ret;
+}
+
+#endif
+
/* fops */
static int
@@ -2329,7 +2609,7 @@
}
}
- /* increment usage count for the device */
+ /* Increment usage count for our sisusb */
kref_get(&sisusb->kref);
sisusb->isopen = 1;
@@ -2340,12 +2620,10 @@
up(&disconnect_sem);
- printk(KERN_DEBUG "sisusbvga[%d]: opened", sisusb->minor);
-
return 0;
}
-static void
+void
sisusb_delete(struct kref *kref)
{
struct sisusb_usb_data *sisusb = to_sisusb_dev(kref);
@@ -2359,6 +2637,9 @@
sisusb->sisusb_dev = NULL;
sisusb_free_buffers(sisusb);
sisusb_free_urbs(sisusb);
+#ifdef INCL_SISUSB_CON
+ kfree(sisusb->SiS_Pr);
+#endif
kfree(sisusb);
}
@@ -2395,8 +2676,6 @@
up(&disconnect_sem);
- printk(KERN_DEBUG "sisusbvga[%d]: released", myminor);
-
return 0;
}
@@ -2733,6 +3012,12 @@
int retval, port, length;
u32 address;
+ /* All our commands require the device
+ * to be initialized.
+ */
+ if (!sisusb->devinit)
+ return -ENODEV;
+
port = y->data3 -
SISUSB_PCI_PSEUDO_IOPORTBASE +
SISUSB_PCI_IOPORTBASE;
@@ -2774,6 +3059,10 @@
break;
case SUCMD_CLRSCR:
+ /* Gfx core must be initialized */
+ if (!sisusb->gfxinit)
+ return -ENODEV;
+
length = (y->data0 << 16) | (y->data1 << 8) | y->data2;
address = y->data3 -
SISUSB_PCI_PSEUDO_MEMBASE +
@@ -2781,11 +3070,61 @@
retval = sisusb_clear_vram(sisusb, address, length);
break;
+ case SUCMD_HANDLETEXTMODE:
+ retval = 0;
+#ifdef INCL_SISUSB_CON
+ /* Gfx core must be initialized, SiS_Pr must exist */
+ if (!sisusb->gfxinit || !sisusb->SiS_Pr)
+ return -ENODEV;
+
+ switch (y->data0) {
+ case 0:
+ retval = sisusb_reset_text_mode(sisusb, 0);
+ break;
+ case 1:
+ sisusb->textmodedestroyed = 1;
+ break;
+ }
+#endif
+ break;
+
+#ifdef INCL_SISUSB_CON
+ case SUCMD_SETMODE:
+ /* Gfx core must be initialized, SiS_Pr must exist */
+ if (!sisusb->gfxinit || !sisusb->SiS_Pr)
+ return -ENODEV;
+
+ retval = 0;
+
+ sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
+ sisusb->SiS_Pr->sisusb = (void *)sisusb;
+
+ if (SiSUSBSetMode(sisusb->SiS_Pr, y->data3))
+ retval = -EINVAL;
+
+ break;
+
+ case SUCMD_SETVESAMODE:
+ /* Gfx core must be initialized, SiS_Pr must exist */
+ if (!sisusb->gfxinit || !sisusb->SiS_Pr)
+ return -ENODEV;
+
+ retval = 0;
+
+ sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
+ sisusb->SiS_Pr->sisusb = (void *)sisusb;
+
+ if (SiSUSBSetVESAMode(sisusb->SiS_Pr, y->data3))
+ retval = -EINVAL;
+
+ break;
+#endif
+
default:
retval = -EINVAL;
}
- if(retval > 0)
+ if (retval > 0)
retval = -EIO;
return retval;
@@ -2835,6 +3174,11 @@
x.sisusb_vramsize = sisusb->vramsize;
x.sisusb_minor = sisusb->minor;
x.sisusb_fbdevactive= 0;
+#ifdef INCL_SISUSB_CON
+ x.sisusb_conactive = sisusb->haveconsole ? 1 : 0;
+#else
+ x.sisusb_conactive = 0;
+#endif
if (copy_to_user((void __user *)arg, &x, sizeof(x)))
retval = -EFAULT;
@@ -2895,9 +3239,13 @@
};
static struct usb_class_driver usb_sisusb_class = {
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
.name = "usb/sisusbvga%d",
- .fops = &usb_sisusb_fops,
.mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
+#else
+ .name = "sisusbvga%d",
+#endif
+ .fops = &usb_sisusb_fops,
.minor_base = SISUSB_MINOR
};
@@ -2994,12 +3342,25 @@
printk(KERN_INFO "sisusbvga[%d]: Allocated %d output buffers\n",
sisusb->minor, sisusb->numobufs);
+#ifdef INCL_SISUSB_CON
+ /* Allocate our SiS_Pr */
+ if (!(sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL))) {
+ printk(KERN_ERR
+ "sisusbvga[%d]: Failed to allocate SiS_Pr\n",
+ sisusb->minor);
+ }
+#endif
+
/* Do remaining init stuff */
init_waitqueue_head(&sisusb->wait_q);
usb_set_intfdata(intf, sisusb);
+ usb_get_dev(sisusb->sisusb_dev);
+
+ sisusb->present = 1;
+
#ifdef SISUSB_OLD_CONFIG_COMPAT
{
int ret;
@@ -3014,14 +3375,19 @@
sisusb->minor);
else
sisusb->ioctl32registered = 1;
-
}
#endif
- sisusb->present = 1;
-
if (dev->speed == USB_SPEED_HIGH) {
- if (sisusb_init_gfxdevice(sisusb, 1))
+ int initscreen = 1;
+#ifdef INCL_SISUSB_CON
+ if (sisusb_first_vc > 0 &&
+ sisusb_last_vc > 0 &&
+ sisusb_first_vc <= sisusb_last_vc &&
+ sisusb_last_vc <= MAX_NR_CONSOLES)
+ initscreen = 0;
+#endif
+ if (sisusb_init_gfxdevice(sisusb, initscreen))
printk(KERN_ERR
"sisusbvga[%d]: Failed to early "
"initialize device\n",
@@ -3035,6 +3401,16 @@
sisusb->ready = 1;
+#ifdef SISUSBENDIANTEST
+ printk(KERN_DEBUG "sisusb: *** RWTEST ***\n");
+ sisusb_testreadwrite(sisusb);
+ printk(KERN_DEBUG "sisusb: *** RWTEST END ***\n");
+#endif
+
+#ifdef INCL_SISUSB_CON
+ sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc);
+#endif
+
return 0;
error_4:
@@ -3053,13 +3429,20 @@
struct sisusb_usb_data *sisusb;
int minor;
- down(&disconnect_sem);
-
/* This should *not* happen */
- if (!(sisusb = usb_get_intfdata(intf))) {
- up(&disconnect_sem);
+ if (!(sisusb = usb_get_intfdata(intf)))
return;
- }
+
+#ifdef INCL_SISUSB_CON
+ sisusb_console_exit(sisusb);
+#endif
+
+ /* The above code doesn't need the disconnect
+ * semaphore to be down; its meaning is to
+ * protect all other routines from the disconnect
+ * case, not the other way round.
+ */
+ down(&disconnect_sem);
down(&sisusb->lock);
@@ -3123,11 +3506,17 @@
{
int retval;
+#ifdef INCL_SISUSB_CON
+ sisusb_init_concode();
+#endif
+
if (!(retval = usb_register(&sisusb_driver))) {
+
printk(KERN_INFO "sisusb: Driver version %d.%d.%d\n",
SISUSB_VERSION, SISUSB_REVISION, SISUSB_PATCHLEVEL);
printk(KERN_INFO
"sisusb: Copyright (C) 2005 Thomas Winischhofer\n");
+
}
return retval;
@@ -3142,6 +3531,6 @@
module_exit(usb_sisusb_exit);
MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>");
-MODULE_DESCRIPTION("sisusb - Driver for Net2280/SiS315-based USB2VGA dongles");
+MODULE_DESCRIPTION("sisusbvga - Driver for Net2280/SiS315-based USB2VGA dongles");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 1306d00..401ff21 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -46,15 +46,36 @@
#endif
#endif
+/* For older kernels, support for text consoles is by default
+ * off. To ensable text console support, change the following:
+ */
+#if 0
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
+#define CONFIG_USB_SISUSBVGA_CON
+#endif
+#endif
+
/* Version Information */
#define SISUSB_VERSION 0
#define SISUSB_REVISION 0
-#define SISUSB_PATCHLEVEL 7
+#define SISUSB_PATCHLEVEL 8
+
+/* Include console and mode switching code? */
+
+#ifdef CONFIG_USB_SISUSBVGA_CON
+#define INCL_SISUSB_CON 1
+#endif
+
+#ifdef INCL_SISUSB_CON
+#include <linux/console.h>
+#include <linux/vt_kern.h>
+#include "sisusb_struct.h"
+#endif
/* USB related */
-#define SISUSB_MINOR 133 /* FIXME */
+#define SISUSB_MINOR 133 /* official */
/* Size of the sisusb input/output buffers */
#define SISUSB_IBUF_SIZE 0x01000
@@ -131,6 +152,26 @@
unsigned char gfxinit; /* graphics core initialized? */
unsigned short chipid, chipvendor;
unsigned short chiprevision;
+#ifdef INCL_SISUSB_CON
+ struct SiS_Private *SiS_Pr;
+ unsigned long scrbuf;
+ unsigned int scrbuf_size;
+ int haveconsole, con_first, con_last;
+ int havethisconsole[MAX_NR_CONSOLES];
+ int textmodedestroyed;
+ unsigned int sisusb_num_columns; /* real number, not vt's idea */
+ int cur_start_addr, con_rolled_over;
+ int sisusb_cursor_loc, bad_cursor_pos;
+ int sisusb_cursor_size_from;
+ int sisusb_cursor_size_to;
+ int current_font_height, current_font_512;
+ int font_backup_size, font_backup_height, font_backup_512;
+ char *font_backup;
+ int font_slot;
+ struct vc_data *sisusb_display_fg;
+ int is_gfx;
+ int con_blanked;
+#endif
};
#define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref)
@@ -249,7 +290,9 @@
__u32 sisusb_fbdevactive; /* != 0 if framebuffer device active */
- __u8 sisusb_reserved[32]; /* for future use */
+ __u32 sisusb_conactive; /* != 0 if console driver active */
+
+ __u8 sisusb_reserved[28]; /* for future use */
};
struct sisusb_command {
@@ -261,18 +304,24 @@
__u32 data4; /* for future use */
};
-#define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */
-#define SUCMD_SET 0x02 /* data1 = value */
-#define SUCMD_SETOR 0x03 /* data1 = or */
-#define SUCMD_SETAND 0x04 /* data1 = and */
-#define SUCMD_SETANDOR 0x05 /* data1 = and, data2 = or */
-#define SUCMD_SETMASK 0x06 /* data1 = data, data2 = mask */
+#define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */
+#define SUCMD_SET 0x02 /* data1 = value */
+#define SUCMD_SETOR 0x03 /* data1 = or */
+#define SUCMD_SETAND 0x04 /* data1 = and */
+#define SUCMD_SETANDOR 0x05 /* data1 = and, data2 = or */
+#define SUCMD_SETMASK 0x06 /* data1 = data, data2 = mask */
-#define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */
+#define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */
+
+#define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */
+
+#define SUCMD_SETMODE 0x09 /* Set a display mode (data3 = SiS mode) */
+#define SUCMD_SETVESAMODE 0x0a /* Set a display mode (data3 = VESA mode) */
#define SISUSB_COMMAND _IOWR(0xF3,0x3D,struct sisusb_command)
-#define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32)
-#define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info)
+#define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32)
+#define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info)
+
#endif /* SISUSB_H */
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
new file mode 100644
index 0000000..2458446
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -0,0 +1,1658 @@
+/*
+ * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
+ *
+ * VGA text mode console part
+ *
+ * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * * notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * * notice, this list of conditions and the following disclaimer in the
+ * * documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * * derived from this software without specific psisusbr written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ * Portions based on vgacon.c which are
+ * Created 28 Sep 1997 by Geert Uytterhoeven
+ * Rewritten by Martin Mares <mj@ucw.cz>, July 1998
+ * based on code Copyright (C) 1991, 1992 Linus Torvalds
+ * 1995 Jay Estabrook
+ *
+ * A note on using in_atomic() in here: We can't handle console
+ * calls from non-schedulable context due to our USB-dependend
+ * nature. For now, this driver just ignores any calls if it
+ * detects this state.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/kd.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/vt_kern.h>
+#include <linux/selection.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/smp_lock.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+
+#include "sisusb.h"
+
+#ifdef INCL_SISUSB_CON
+extern int sisusb_setreg(struct sisusb_usb_data *, int, u8);
+extern int sisusb_getreg(struct sisusb_usb_data *, int, u8 *);
+extern int sisusb_setidxreg(struct sisusb_usb_data *, int, u8, u8);
+extern int sisusb_getidxreg(struct sisusb_usb_data *, int, u8, u8 *);
+extern int sisusb_setidxregor(struct sisusb_usb_data *, int, u8, u8);
+extern int sisusb_setidxregand(struct sisusb_usb_data *, int, u8, u8);
+extern int sisusb_setidxregandor(struct sisusb_usb_data *, int, u8, u8, u8);
+
+extern int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data);
+extern int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data);
+extern int sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data);
+extern int sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data);
+extern int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
+ u32 dest, int length, size_t *bytes_written);
+
+extern void sisusb_delete(struct kref *kref);
+extern int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init);
+
+extern int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
+
+#define sisusbcon_writew(val, addr) (*(addr) = (val))
+#define sisusbcon_readw(addr) (*(addr))
+#define sisusbcon_memmovew(d, s, c) memmove(d, s, c)
+#define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c)
+
+/* vc_data -> sisusb conversion table */
+static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES];
+
+/* Forward declaration */
+static const struct consw sisusb_con;
+
+extern struct semaphore disconnect_sem;
+
+static inline void
+sisusbcon_memsetw(u16 *s, u16 c, unsigned int count)
+{
+ count /= 2;
+ while (count--)
+ sisusbcon_writew(c, s++);
+}
+
+static inline void
+sisusb_initialize(struct sisusb_usb_data *sisusb)
+{
+ /* Reset cursor and start address */
+ if (sisusb_setidxreg(sisusb, SISCR, 0x0c, 0x00))
+ return;
+ if (sisusb_setidxreg(sisusb, SISCR, 0x0d, 0x00))
+ return;
+ if (sisusb_setidxreg(sisusb, SISCR, 0x0e, 0x00))
+ return;
+ sisusb_setidxreg(sisusb, SISCR, 0x0f, 0x00);
+}
+
+static inline void
+sisusbcon_set_start_address(struct sisusb_usb_data *sisusb, struct vc_data *c)
+{
+ sisusb->cur_start_addr = (c->vc_visible_origin - sisusb->scrbuf) / 2;
+
+ sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8));
+ sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff));
+}
+
+void
+sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location)
+{
+ if (sisusb->sisusb_cursor_loc == location)
+ return;
+
+ sisusb->sisusb_cursor_loc = location;
+
+ /* Hardware bug: Text cursor appears twice or not at all
+ * at some positions. Work around it with the cursor skew
+ * bits.
+ */
+
+ if ((location & 0x0007) == 0x0007) {
+ sisusb->bad_cursor_pos = 1;
+ location--;
+ if (sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0x1f, 0x20))
+ return;
+ } else if (sisusb->bad_cursor_pos) {
+ if (sisusb_setidxregand(sisusb, SISCR, 0x0b, 0x1f))
+ return;
+ sisusb->bad_cursor_pos = 0;
+ }
+
+ if (sisusb_setidxreg(sisusb, SISCR, 0x0e, (location >> 8)))
+ return;
+ sisusb_setidxreg(sisusb, SISCR, 0x0f, (location & 0xff));
+}
+
+static inline struct sisusb_usb_data *
+sisusb_get_sisusb(unsigned short console)
+{
+ return mysisusbs[console];
+}
+
+static inline int
+sisusb_sisusb_valid(struct sisusb_usb_data *sisusb)
+{
+ if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev)
+ return 0;
+
+ return 1;
+}
+
+static struct sisusb_usb_data *
+sisusb_get_sisusb_lock_and_check(unsigned short console)
+{
+ struct sisusb_usb_data *sisusb;
+
+ /* We can't handle console calls in non-schedulable
+ * context due to our locks and the USB transport.
+ * So we simply ignore them. This should only affect
+ * some calls to printk.
+ */
+ if (in_atomic())
+ return NULL;
+
+ if (!(sisusb = sisusb_get_sisusb(console)))
+ return NULL;
+
+ down(&sisusb->lock);
+
+ if (!sisusb_sisusb_valid(sisusb) ||
+ !sisusb->havethisconsole[console]) {
+ up(&sisusb->lock);
+ return NULL;
+ }
+
+ return sisusb;
+}
+
+static int
+sisusb_is_inactive(struct vc_data *c, struct sisusb_usb_data *sisusb)
+{
+ if (sisusb->is_gfx ||
+ sisusb->textmodedestroyed ||
+ c->vc_mode != KD_TEXT)
+ return 1;
+
+ return 0;
+}
+
+/* con_startup console interface routine */
+static const char *
+sisusbcon_startup(void)
+{
+ return "SISUSBCON";
+}
+
+/* con_init console interface routine */
+static void
+sisusbcon_init(struct vc_data *c, int init)
+{
+ struct sisusb_usb_data *sisusb;
+ int cols, rows;
+
+ /* This is called by take_over_console(),
+ * ie by us/under our control. It is
+ * only called after text mode and fonts
+ * are set up/restored.
+ */
+
+ down(&disconnect_sem);
+
+ if (!(sisusb = sisusb_get_sisusb(c->vc_num))) {
+ up(&disconnect_sem);
+ return;
+ }
+
+ down(&sisusb->lock);
+
+ if (!sisusb_sisusb_valid(sisusb)) {
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+ return;
+ }
+
+ c->vc_can_do_color = 1;
+
+ c->vc_complement_mask = 0x7700;
+
+ c->vc_hi_font_mask = sisusb->current_font_512 ? 0x0800 : 0;
+
+ sisusb->haveconsole = 1;
+
+ sisusb->havethisconsole[c->vc_num] = 1;
+
+ /* We only support 640x400 */
+ c->vc_scan_lines = 400;
+
+ c->vc_font.height = sisusb->current_font_height;
+
+ /* We only support width = 8 */
+ cols = 80;
+ rows = c->vc_scan_lines / c->vc_font.height;
+
+ /* Increment usage count for our sisusb.
+ * Doing so saves us from upping/downing
+ * the disconnect semaphore; we can't
+ * lose our sisusb until this is undone
+ * in con_deinit. For all other console
+ * interface functions, it suffices to
+ * use sisusb->lock and do a quick check
+ * of sisusb for device disconnection.
+ */
+ kref_get(&sisusb->kref);
+
+ if (!*c->vc_uni_pagedir_loc)
+ con_set_default_unimap(c);
+
+ up(&sisusb->lock);
+
+ up(&disconnect_sem);
+
+ if (init) {
+ c->vc_cols = cols;
+ c->vc_rows = rows;
+ } else
+ vc_resize(c, cols, rows);
+}
+
+/* con_deinit console interface routine */
+static void
+sisusbcon_deinit(struct vc_data *c)
+{
+ struct sisusb_usb_data *sisusb;
+ int i;
+
+ /* This is called by take_over_console()
+ * and others, ie not under our control.
+ */
+
+ down(&disconnect_sem);
+
+ if (!(sisusb = sisusb_get_sisusb(c->vc_num))) {
+ up(&disconnect_sem);
+ return;
+ }
+
+ down(&sisusb->lock);
+
+ /* Clear ourselves in mysisusbs */
+ mysisusbs[c->vc_num] = NULL;
+
+ sisusb->havethisconsole[c->vc_num] = 0;
+
+ /* Free our font buffer if all consoles are gone */
+ if (sisusb->font_backup) {
+ for(i = 0; i < MAX_NR_CONSOLES; i++) {
+ if (sisusb->havethisconsole[c->vc_num])
+ break;
+ }
+ if (i == MAX_NR_CONSOLES) {
+ vfree(sisusb->font_backup);
+ sisusb->font_backup = NULL;
+ }
+ }
+
+ up(&sisusb->lock);
+
+ /* decrement the usage count on our sisusb */
+ kref_put(&sisusb->kref, sisusb_delete);
+
+ up(&disconnect_sem);
+}
+
+/* interface routine */
+static u8
+sisusbcon_build_attr(struct vc_data *c, u8 color, u8 intensity,
+ u8 blink, u8 underline, u8 reverse)
+{
+ u8 attr = color;
+
+ if (underline)
+ attr = (attr & 0xf0) | c->vc_ulcolor;
+ else if (intensity == 0)
+ attr = (attr & 0xf0) | c->vc_halfcolor;
+
+ if (reverse)
+ attr = ((attr) & 0x88) |
+ ((((attr) >> 4) |
+ ((attr) << 4)) & 0x77);
+
+ if (blink)
+ attr ^= 0x80;
+
+ if (intensity == 2)
+ attr ^= 0x08;
+
+ return attr;
+}
+
+/* Interface routine */
+static void
+sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count)
+{
+ /* Invert a region. This is called with a pointer
+ * to the console's internal screen buffer. So we
+ * simply do the inversion there and rely on
+ * a call to putc(s) to update the real screen.
+ */
+
+ while (count--) {
+ u16 a = sisusbcon_readw(p);
+
+ a = ((a) & 0x88ff) |
+ (((a) & 0x7000) >> 4) |
+ (((a) & 0x0700) << 4);
+
+ sisusbcon_writew(a, p++);
+ }
+}
+
+#define SISUSB_VADDR(x,y) \
+ ((u16 *)c->vc_origin + \
+ (y) * sisusb->sisusb_num_columns + \
+ (x))
+
+#define SISUSB_HADDR(x,y) \
+ ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \
+ (y) * sisusb->sisusb_num_columns + \
+ (x))
+
+/* Interface routine */
+static void
+sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
+{
+ struct sisusb_usb_data *sisusb;
+ ssize_t written;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return;
+
+ /* sisusb->lock is down */
+
+ /* Don't need to put the character into buffer ourselves,
+ * because the vt does this BEFORE calling us.
+ */
+#if 0
+ sisusbcon_writew(ch, SISUSB_VADDR(x, y));
+#endif
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return;
+ }
+
+
+ sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
+ (u32)SISUSB_HADDR(x, y), 2, &written);
+
+ up(&sisusb->lock);
+}
+
+/* Interface routine */
+static void
+sisusbcon_putcs(struct vc_data *c, const unsigned short *s,
+ int count, int y, int x)
+{
+ struct sisusb_usb_data *sisusb;
+ ssize_t written;
+ u16 *dest;
+ int i;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return;
+
+ /* sisusb->lock is down */
+
+ /* Need to put the characters into the buffer ourselves,
+ * because the vt does this AFTER calling us.
+ */
+
+ dest = SISUSB_VADDR(x, y);
+
+ for (i = count; i > 0; i--)
+ sisusbcon_writew(sisusbcon_readw(s++), dest++);
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return;
+ }
+
+ sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
+ (u32)SISUSB_HADDR(x, y), count * 2, &written);
+
+ up(&sisusb->lock);
+}
+
+/* Interface routine */
+static void
+sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
+{
+ struct sisusb_usb_data *sisusb;
+ u16 eattr = c->vc_video_erase_char;
+ ssize_t written;
+ int i, length, cols;
+ u16 *dest;
+
+ if (width <= 0 || height <= 0)
+ return;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return;
+
+ /* sisusb->lock is down */
+
+ /* Need to clear buffer ourselves, because the vt does
+ * this AFTER calling us.
+ */
+
+ dest = SISUSB_VADDR(x, y);
+
+ cols = sisusb->sisusb_num_columns;
+
+ if (width > cols)
+ width = cols;
+
+ if (x == 0 && width >= c->vc_cols) {
+
+ sisusbcon_memsetw(dest, eattr, height * cols * 2);
+
+ } else {
+
+ for (i = height; i > 0; i--, dest += cols)
+ sisusbcon_memsetw(dest, eattr, width * 2);
+
+ }
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return;
+ }
+
+ length = ((height * cols) - x - (cols - width - x)) * 2;
+
+
+ sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y),
+ (u32)SISUSB_HADDR(x, y), length, &written);
+
+ up(&sisusb->lock);
+}
+
+/* Interface routine */
+static void
+sisusbcon_bmove(struct vc_data *c, int sy, int sx,
+ int dy, int dx, int height, int width)
+{
+ struct sisusb_usb_data *sisusb;
+ ssize_t written;
+ int cols, length;
+#if 0
+ u16 *src, *dest;
+ int i;
+#endif
+
+ if (width <= 0 || height <= 0)
+ return;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return;
+
+ /* sisusb->lock is down */
+
+ cols = sisusb->sisusb_num_columns;
+
+ /* Don't need to move data outselves, because
+ * vt does this BEFORE calling us.
+ * This is only used by vt's insert/deletechar.
+ */
+#if 0
+ if (sx == 0 && dx == 0 && width >= c->vc_cols && width <= cols) {
+
+ sisusbcon_memmovew(SISUSB_VADDR(0, dy), SISUSB_VADDR(0, sy),
+ height * width * 2);
+
+ } else if (dy < sy || (dy == sy && dx < sx)) {
+
+ src = SISUSB_VADDR(sx, sy);
+ dest = SISUSB_VADDR(dx, dy);
+
+ for (i = height; i > 0; i--) {
+ sisusbcon_memmovew(dest, src, width * 2);
+ src += cols;
+ dest += cols;
+ }
+
+ } else {
+
+ src = SISUSB_VADDR(sx, sy + height - 1);
+ dest = SISUSB_VADDR(dx, dy + height - 1);
+
+ for (i = height; i > 0; i--) {
+ sisusbcon_memmovew(dest, src, width * 2);
+ src -= cols;
+ dest -= cols;
+ }
+
+ }
+#endif
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return;
+ }
+
+ length = ((height * cols) - dx - (cols - width - dx)) * 2;
+
+
+ sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy),
+ (u32)SISUSB_HADDR(dx, dy), length, &written);
+
+ up(&sisusb->lock);
+}
+
+/* interface routine */
+static int
+sisusbcon_switch(struct vc_data *c)
+{
+ struct sisusb_usb_data *sisusb;
+ ssize_t written;
+ int length;
+
+ /* Returnvalue 0 means we have fully restored screen,
+ * and vt doesn't need to call do_update_region().
+ * Returnvalue != 0 naturally means the opposite.
+ */
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return 0;
+
+ /* sisusb->lock is down */
+
+ /* Don't write to screen if in gfx mode */
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return 0;
+ }
+
+ /* That really should not happen. It would mean we are
+ * being called while the vc is using its private buffer
+ * as origin.
+ */
+ if (c->vc_origin == (unsigned long)c->vc_screenbuf) {
+ up(&sisusb->lock);
+ printk(KERN_DEBUG "sisusb: ASSERT ORIGIN != SCREENBUF!\n");
+ return 0;
+ }
+
+ /* Check that we don't copy too much */
+ length = min((int)c->vc_screenbuf_size,
+ (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin));
+
+ /* Restore the screen contents */
+ sisusbcon_memcpyw((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf,
+ length);
+
+ sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin,
+ (u32)SISUSB_HADDR(0, 0),
+ length, &written);
+
+ up(&sisusb->lock);
+
+ return 0;
+}
+
+/* interface routine */
+static void
+sisusbcon_save_screen(struct vc_data *c)
+{
+ struct sisusb_usb_data *sisusb;
+ int length;
+
+ /* Save the current screen contents to vc's private
+ * buffer.
+ */
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return;
+
+ /* sisusb->lock is down */
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return;
+ }
+
+ /* Check that we don't copy too much */
+ length = min((int)c->vc_screenbuf_size,
+ (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin));
+
+ /* Save the screen contents to vc's private buffer */
+ sisusbcon_memcpyw((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin,
+ length);
+
+ up(&sisusb->lock);
+}
+
+/* interface routine */
+static int
+sisusbcon_set_palette(struct vc_data *c, unsigned char *table)
+{
+ struct sisusb_usb_data *sisusb;
+ int i, j;
+
+ /* Return value not used by vt */
+
+ if (!CON_IS_VISIBLE(c))
+ return -EINVAL;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return -EINVAL;
+
+ /* sisusb->lock is down */
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return -EINVAL;
+ }
+
+ for (i = j = 0; i < 16; i++) {
+ if (sisusb_setreg(sisusb, SISCOLIDX, table[i]))
+ break;
+ if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2))
+ break;
+ if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2))
+ break;
+ if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2))
+ break;
+ }
+
+ up(&sisusb->lock);
+
+ return 0;
+}
+
+/* interface routine */
+static int
+sisusbcon_blank(struct vc_data *c, int blank, int mode_switch)
+{
+ struct sisusb_usb_data *sisusb;
+ u8 sr1, cr17, pmreg, cr63;
+ ssize_t written;
+ int ret = 0;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return 0;
+
+ /* sisusb->lock is down */
+
+ if (mode_switch)
+ sisusb->is_gfx = blank ? 1 : 0;
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return 0;
+ }
+
+ switch (blank) {
+
+ case 1: /* Normal blanking: Clear screen */
+ case -1:
+ sisusbcon_memsetw((u16 *)c->vc_origin,
+ c->vc_video_erase_char,
+ c->vc_screenbuf_size);
+ sisusb_copy_memory(sisusb,
+ (unsigned char *)c->vc_origin,
+ (u32)(sisusb->vrambase +
+ (c->vc_origin - sisusb->scrbuf)),
+ c->vc_screenbuf_size, &written);
+ sisusb->con_blanked = 1;
+ ret = 1;
+ break;
+
+ default: /* VESA blanking */
+ switch (blank) {
+ case 0: /* Unblank */
+ sr1 = 0x00;
+ cr17 = 0x80;
+ pmreg = 0x00;
+ cr63 = 0x00;
+ ret = 1;
+ sisusb->con_blanked = 0;
+ break;
+ case VESA_VSYNC_SUSPEND + 1:
+ sr1 = 0x20;
+ cr17 = 0x80;
+ pmreg = 0x80;
+ cr63 = 0x40;
+ break;
+ case VESA_HSYNC_SUSPEND + 1:
+ sr1 = 0x20;
+ cr17 = 0x80;
+ pmreg = 0x40;
+ cr63 = 0x40;
+ break;
+ case VESA_POWERDOWN + 1:
+ sr1 = 0x20;
+ cr17 = 0x00;
+ pmreg = 0xc0;
+ cr63 = 0x40;
+ break;
+ default:
+ up(&sisusb->lock);
+ return -EINVAL;
+ }
+
+ sisusb_setidxregandor(sisusb, SISSR, 0x01, ~0x20, sr1);
+ sisusb_setidxregandor(sisusb, SISCR, 0x17, 0x7f, cr17);
+ sisusb_setidxregandor(sisusb, SISSR, 0x1f, 0x3f, pmreg);
+ sisusb_setidxregandor(sisusb, SISCR, 0x63, 0xbf, cr63);
+
+ }
+
+ up(&sisusb->lock);
+
+ return ret;
+}
+
+/* interface routine */
+static int
+sisusbcon_scrolldelta(struct vc_data *c, int lines)
+{
+ struct sisusb_usb_data *sisusb;
+ int margin = c->vc_size_row * 4;
+ int ul, we, p, st;
+
+ /* The return value does not seem to be used */
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return 0;
+
+ /* sisusb->lock is down */
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return 0;
+ }
+
+ if (!lines) /* Turn scrollback off */
+ c->vc_visible_origin = c->vc_origin;
+ else {
+
+ if (sisusb->con_rolled_over >
+ (c->vc_scr_end - sisusb->scrbuf) + margin) {
+
+ ul = c->vc_scr_end - sisusb->scrbuf;
+ we = sisusb->con_rolled_over + c->vc_size_row;
+
+ } else {
+
+ ul = 0;
+ we = sisusb->scrbuf_size;
+
+ }
+
+ p = (c->vc_visible_origin - sisusb->scrbuf - ul + we) % we +
+ lines * c->vc_size_row;
+
+ st = (c->vc_origin - sisusb->scrbuf - ul + we) % we;
+
+ if (st < 2 * margin)
+ margin = 0;
+
+ if (p < margin)
+ p = 0;
+
+ if (p > st - margin)
+ p = st;
+
+ c->vc_visible_origin = sisusb->scrbuf + (p + ul) % we;
+ }
+
+ sisusbcon_set_start_address(sisusb, c);
+
+ up(&sisusb->lock);
+
+ return 1;
+}
+
+/* Interface routine */
+static void
+sisusbcon_cursor(struct vc_data *c, int mode)
+{
+ struct sisusb_usb_data *sisusb;
+ int from, to, baseline;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return;
+
+ /* sisusb->lock is down */
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return;
+ }
+
+ if (c->vc_origin != c->vc_visible_origin) {
+ c->vc_visible_origin = c->vc_origin;
+ sisusbcon_set_start_address(sisusb, c);
+ }
+
+ if (mode == CM_ERASE) {
+ sisusb_setidxregor(sisusb, SISCR, 0x0a, 0x20);
+ sisusb->sisusb_cursor_size_to = -1;
+ up(&sisusb->lock);
+ return;
+ }
+
+ sisusb_set_cursor(sisusb, (c->vc_pos - sisusb->scrbuf) / 2);
+
+ baseline = c->vc_font.height - (c->vc_font.height < 10 ? 1 : 2);
+
+ switch (c->vc_cursor_type & 0x0f) {
+ case CUR_BLOCK: from = 1;
+ to = c->vc_font.height;
+ break;
+ case CUR_TWO_THIRDS: from = c->vc_font.height / 3;
+ to = baseline;
+ break;
+ case CUR_LOWER_HALF: from = c->vc_font.height / 2;
+ to = baseline;
+ break;
+ case CUR_LOWER_THIRD: from = (c->vc_font.height * 2) / 3;
+ to = baseline;
+ break;
+ case CUR_NONE: from = 31;
+ to = 30;
+ break;
+ default:
+ case CUR_UNDERLINE: from = baseline - 1;
+ to = baseline;
+ break;
+ }
+
+ if (sisusb->sisusb_cursor_size_from != from ||
+ sisusb->sisusb_cursor_size_to != to) {
+
+ sisusb_setidxreg(sisusb, SISCR, 0x0a, from);
+ sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, to);
+
+ sisusb->sisusb_cursor_size_from = from;
+ sisusb->sisusb_cursor_size_to = to;
+ }
+
+ up(&sisusb->lock);
+}
+
+static int
+sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
+ int t, int b, int dir, int lines)
+{
+ int cols = sisusb->sisusb_num_columns;
+ int length = ((b - t) * cols) * 2;
+ u16 eattr = c->vc_video_erase_char;
+ ssize_t written;
+
+ /* sisusb->lock is down */
+
+ /* Scroll an area which does not match the
+ * visible screen's dimensions. This needs
+ * to be done separately, as it does not
+ * use hardware panning.
+ */
+
+ switch (dir) {
+
+ case SM_UP:
+ sisusbcon_memmovew(SISUSB_VADDR(0, t),
+ SISUSB_VADDR(0, t + lines),
+ (b - t - lines) * cols * 2);
+ sisusbcon_memsetw(SISUSB_VADDR(0, b - lines), eattr,
+ lines * cols * 2);
+ break;
+
+ case SM_DOWN:
+ sisusbcon_memmovew(SISUSB_VADDR(0, t + lines),
+ SISUSB_VADDR(0, t),
+ (b - t - lines) * cols * 2);
+ sisusbcon_memsetw(SISUSB_VADDR(0, t), eattr,
+ lines * cols * 2);
+ break;
+ }
+
+ sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t),
+ (u32)SISUSB_HADDR(0, t), length, &written);
+
+ up(&sisusb->lock);
+
+ return 1;
+}
+
+/* Interface routine */
+static int
+sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
+{
+ struct sisusb_usb_data *sisusb;
+ u16 eattr = c->vc_video_erase_char;
+ ssize_t written;
+ int copyall = 0;
+ unsigned long oldorigin;
+ unsigned int delta = lines * c->vc_size_row;
+ u32 originoffset;
+
+ /* Returning != 0 means we have done the scrolling successfully.
+ * Returning 0 makes vt do the scrolling on its own.
+ * Note that con_scroll is only called if the console is
+ * visible. In that case, the origin should be our buffer,
+ * not the vt's private one.
+ */
+
+ if (!lines)
+ return 1;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return 0;
+
+ /* sisusb->lock is down */
+
+ if (sisusb_is_inactive(c, sisusb)) {
+ up(&sisusb->lock);
+ return 0;
+ }
+
+ /* Special case */
+ if (t || b != c->vc_rows)
+ return sisusbcon_scroll_area(c, sisusb, t, b, dir, lines);
+
+ if (c->vc_origin != c->vc_visible_origin) {
+ c->vc_visible_origin = c->vc_origin;
+ sisusbcon_set_start_address(sisusb, c);
+ }
+
+ /* limit amount to maximum realistic size */
+ if (lines > c->vc_rows)
+ lines = c->vc_rows;
+
+ oldorigin = c->vc_origin;
+
+ switch (dir) {
+
+ case SM_UP:
+
+ if (c->vc_scr_end + delta >=
+ sisusb->scrbuf + sisusb->scrbuf_size) {
+ sisusbcon_memcpyw((u16 *)sisusb->scrbuf,
+ (u16 *)(oldorigin + delta),
+ c->vc_screenbuf_size - delta);
+ c->vc_origin = sisusb->scrbuf;
+ sisusb->con_rolled_over = oldorigin - sisusb->scrbuf;
+ copyall = 1;
+ } else
+ c->vc_origin += delta;
+
+ sisusbcon_memsetw(
+ (u16 *)(c->vc_origin + c->vc_screenbuf_size - delta),
+ eattr, delta);
+
+ break;
+
+ case SM_DOWN:
+
+ if (oldorigin - delta < sisusb->scrbuf) {
+ sisusbcon_memmovew((u16 *)(sisusb->scrbuf +
+ sisusb->scrbuf_size -
+ c->vc_screenbuf_size +
+ delta),
+ (u16 *)oldorigin,
+ c->vc_screenbuf_size - delta);
+ c->vc_origin = sisusb->scrbuf +
+ sisusb->scrbuf_size -
+ c->vc_screenbuf_size;
+ sisusb->con_rolled_over = 0;
+ copyall = 1;
+ } else
+ c->vc_origin -= delta;
+
+ c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
+
+ scr_memsetw((u16 *)(c->vc_origin), eattr, delta);
+
+ break;
+ }
+
+ originoffset = (u32)(c->vc_origin - sisusb->scrbuf);
+
+ if (copyall)
+ sisusb_copy_memory(sisusb,
+ (char *)c->vc_origin,
+ (u32)(sisusb->vrambase + originoffset),
+ c->vc_screenbuf_size, &written);
+ else if (dir == SM_UP)
+ sisusb_copy_memory(sisusb,
+ (char *)c->vc_origin + c->vc_screenbuf_size - delta,
+ (u32)sisusb->vrambase + originoffset +
+ c->vc_screenbuf_size - delta,
+ delta, &written);
+ else
+ sisusb_copy_memory(sisusb,
+ (char *)c->vc_origin,
+ (u32)(sisusb->vrambase + originoffset),
+ delta, &written);
+
+ c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
+ c->vc_visible_origin = c->vc_origin;
+
+ sisusbcon_set_start_address(sisusb, c);
+
+ c->vc_pos = c->vc_pos - oldorigin + c->vc_origin;
+
+ up(&sisusb->lock);
+
+ return 1;
+}
+
+/* Interface routine */
+static int
+sisusbcon_set_origin(struct vc_data *c)
+{
+ struct sisusb_usb_data *sisusb;
+
+ /* Returning != 0 means we were successful.
+ * Returning 0 will vt make to use its own
+ * screenbuffer as the origin.
+ */
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return 0;
+
+ /* sisusb->lock is down */
+
+ if (sisusb_is_inactive(c, sisusb) || sisusb->con_blanked) {
+ up(&sisusb->lock);
+ return 0;
+ }
+
+ c->vc_origin = c->vc_visible_origin = sisusb->scrbuf;
+
+ sisusbcon_set_start_address(sisusb, c);
+
+ sisusb->con_rolled_over = 0;
+
+ up(&sisusb->lock);
+
+ return 1;
+}
+
+/* Interface routine */
+static int
+sisusbcon_resize(struct vc_data *c, unsigned int newcols, unsigned int newrows)
+{
+ struct sisusb_usb_data *sisusb;
+ int fh;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return -ENODEV;
+
+ fh = sisusb->current_font_height;
+
+ up(&sisusb->lock);
+
+ /* We are quite unflexible as regards resizing. The vt code
+ * handles sizes where the line length isn't equal the pitch
+ * quite badly. As regards the rows, our panning tricks only
+ * work well if the number of rows equals the visible number
+ * of rows.
+ */
+
+ if (newcols != 80 || c->vc_scan_lines / fh != newrows)
+ return -EINVAL;
+
+ return 0;
+}
+
+int
+sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
+ u8 *arg, int cmapsz, int ch512, int dorecalc,
+ struct vc_data *c, int fh, int uplock)
+{
+ int font_select = 0x00, i, err = 0;
+ u32 offset = 0;
+ u8 dummy;
+
+ /* sisusb->lock is down */
+
+ /*
+ * The default font is kept in slot 0.
+ * A user font is loaded in slot 2 (256 ch)
+ * or 2+3 (512 ch).
+ */
+
+ if ((slot != 0 && slot != 2) || !fh) {
+ if (uplock)
+ up(&sisusb->lock);
+ return -EINVAL;
+ }
+
+ if (set)
+ sisusb->font_slot = slot;
+
+ /* Default font is always 256 */
+ if (slot == 0)
+ ch512 = 0;
+ else
+ offset = 4 * cmapsz;
+
+ font_select = (slot == 0) ? 0x00 : (ch512 ? 0x0e : 0x0a);
+
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x04); /* Write to plane 2 */
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x07); /* Memory mode a0-bf */
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset */
+
+ if (err)
+ goto font_op_error;
+
+ err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x03); /* Select plane read 2 */
+ err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x00); /* Disable odd/even */
+ err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x00); /* Address range a0-bf */
+
+ if (err)
+ goto font_op_error;
+
+ if (arg) {
+ if (set)
+ for (i = 0; i < cmapsz; i++) {
+ err |= sisusb_writeb(sisusb,
+ sisusb->vrambase + offset + i,
+ arg[i]);
+ if (err)
+ break;
+ }
+ else
+ for (i = 0; i < cmapsz; i++) {
+ err |= sisusb_readb(sisusb,
+ sisusb->vrambase + offset + i,
+ &arg[i]);
+ if (err)
+ break;
+ }
+
+ /*
+ * In 512-character mode, the character map is not contiguous if
+ * we want to remain EGA compatible -- which we do
+ */
+
+ if (ch512) {
+ if (set)
+ for (i = 0; i < cmapsz; i++) {
+ err |= sisusb_writeb(sisusb,
+ sisusb->vrambase + offset +
+ (2 * cmapsz) + i,
+ arg[cmapsz + i]);
+ if (err)
+ break;
+ }
+ else
+ for (i = 0; i < cmapsz; i++) {
+ err |= sisusb_readb(sisusb,
+ sisusb->vrambase + offset +
+ (2 * cmapsz) + i,
+ &arg[cmapsz + i]);
+ if (err)
+ break;
+ }
+ }
+ }
+
+ if (err)
+ goto font_op_error;
+
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x03); /* Write to planes 0+1 */
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x03); /* Memory mode a0-bf */
+ if (set)
+ sisusb_setidxreg(sisusb, SISSR, 0x03, font_select);
+ err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset end */
+
+ if (err)
+ goto font_op_error;
+
+ err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x00); /* Select plane read 0 */
+ err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x10); /* Enable odd/even */
+ err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x06); /* Address range b8-bf */
+
+ if (err)
+ goto font_op_error;
+
+ if ((set) && (ch512 != sisusb->current_font_512)) {
+
+ /* Font is shared among all our consoles.
+ * And so is the hi_font_mask.
+ */
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ struct vc_data *c = vc_cons[i].d;
+ if (c && c->vc_sw == &sisusb_con)
+ c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
+ }
+
+ sisusb->current_font_512 = ch512;
+
+ /* color plane enable register:
+ 256-char: enable intensity bit
+ 512-char: disable intensity bit */
+ sisusb_getreg(sisusb, SISINPSTAT, &dummy);
+ sisusb_setreg(sisusb, SISAR, 0x12);
+ sisusb_setreg(sisusb, SISAR, ch512 ? 0x07 : 0x0f);
+
+ sisusb_getreg(sisusb, SISINPSTAT, &dummy);
+ sisusb_setreg(sisusb, SISAR, 0x20);
+ sisusb_getreg(sisusb, SISINPSTAT, &dummy);
+ }
+
+ if (dorecalc) {
+
+ /*
+ * Adjust the screen to fit a font of a certain height
+ */
+
+ unsigned char ovr, vde, fsr;
+ int rows = 0, maxscan = 0;
+
+ if (c) {
+
+ /* Number of video rows */
+ rows = c->vc_scan_lines / fh;
+ /* Scan lines to actually display-1 */
+ maxscan = rows * fh - 1;
+
+ /*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n",
+ rows, maxscan, fh, c->vc_scan_lines);*/
+
+ sisusb_getidxreg(sisusb, SISCR, 0x07, &ovr);
+ vde = maxscan & 0xff;
+ ovr = (ovr & 0xbd) |
+ ((maxscan & 0x100) >> 7) |
+ ((maxscan & 0x200) >> 3);
+ sisusb_setidxreg(sisusb, SISCR, 0x07, ovr);
+ sisusb_setidxreg(sisusb, SISCR, 0x12, vde);
+
+ }
+
+ sisusb_getidxreg(sisusb, SISCR, 0x09, &fsr);
+ fsr = (fsr & 0xe0) | (fh - 1);
+ sisusb_setidxreg(sisusb, SISCR, 0x09, fsr);
+ sisusb->current_font_height = fh;
+
+ sisusb->sisusb_cursor_size_from = -1;
+ sisusb->sisusb_cursor_size_to = -1;
+
+ }
+
+ if (uplock)
+ up(&sisusb->lock);
+
+ if (dorecalc && c) {
+ int i, rows = c->vc_scan_lines / fh;
+
+ /* Now adjust our consoles' size */
+
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ struct vc_data *vc = vc_cons[i].d;
+
+ if (vc && vc->vc_sw == &sisusb_con) {
+ if (CON_IS_VISIBLE(vc)) {
+ vc->vc_sw->con_cursor(vc, CM_DRAW);
+ }
+ vc->vc_font.height = fh;
+ vc_resize(vc, 0, rows);
+ }
+ }
+ }
+
+ return 0;
+
+font_op_error:
+ if (uplock)
+ up(&sisusb->lock);
+
+ return -EIO;
+}
+
+/* Interface routine */
+static int
+sisusbcon_font_set(struct vc_data *c, struct console_font *font,
+ unsigned flags)
+{
+ struct sisusb_usb_data *sisusb;
+ unsigned charcount = font->charcount;
+
+ if (font->width != 8 || (charcount != 256 && charcount != 512))
+ return -EINVAL;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return -ENODEV;
+
+ /* sisusb->lock is down */
+
+ /* Save the user-provided font into a buffer. This
+ * is used for restoring text mode after quitting
+ * from X and for the con_getfont routine.
+ */
+ if (sisusb->font_backup) {
+ if (sisusb->font_backup_size < charcount) {
+ vfree(sisusb->font_backup);
+ sisusb->font_backup = NULL;
+ }
+ }
+
+ if (!sisusb->font_backup)
+ sisusb->font_backup = vmalloc(charcount * 32);
+
+ if (sisusb->font_backup) {
+ memcpy(sisusb->font_backup, font->data, charcount * 32);
+ sisusb->font_backup_size = charcount;
+ sisusb->font_backup_height = font->height;
+ sisusb->font_backup_512 = (charcount == 512) ? 1 : 0;
+ }
+
+ /* do_font_op ups sisusb->lock */
+
+ return sisusbcon_do_font_op(sisusb, 1, 2, font->data,
+ 8192, (charcount == 512),
+ (!(flags & KD_FONT_FLAG_DONT_RECALC)) ? 1 : 0,
+ c, font->height, 1);
+}
+
+/* Interface routine */
+static int
+sisusbcon_font_get(struct vc_data *c, struct console_font *font)
+{
+ struct sisusb_usb_data *sisusb;
+
+ if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num)))
+ return -ENODEV;
+
+ /* sisusb->lock is down */
+
+ font->width = 8;
+ font->height = c->vc_font.height;
+ font->charcount = 256;
+
+ if (!font->data) {
+ up(&sisusb->lock);
+ return 0;
+ }
+
+ if (!sisusb->font_backup) {
+ up(&sisusb->lock);
+ return -ENODEV;
+ }
+
+ /* Copy 256 chars only, like vgacon */
+ memcpy(font->data, sisusb->font_backup, 256 * 32);
+
+ up(&sisusb->lock);
+
+ return 0;
+}
+
+/*
+ * The console `switch' structure for the sisusb console
+ */
+
+static const struct consw sisusb_con = {
+ .owner = THIS_MODULE,
+ .con_startup = sisusbcon_startup,
+ .con_init = sisusbcon_init,
+ .con_deinit = sisusbcon_deinit,
+ .con_clear = sisusbcon_clear,
+ .con_putc = sisusbcon_putc,
+ .con_putcs = sisusbcon_putcs,
+ .con_cursor = sisusbcon_cursor,
+ .con_scroll = sisusbcon_scroll,
+ .con_bmove = sisusbcon_bmove,
+ .con_switch = sisusbcon_switch,
+ .con_blank = sisusbcon_blank,
+ .con_font_set = sisusbcon_font_set,
+ .con_font_get = sisusbcon_font_get,
+ .con_set_palette = sisusbcon_set_palette,
+ .con_scrolldelta = sisusbcon_scrolldelta,
+ .con_build_attr = sisusbcon_build_attr,
+ .con_invert_region = sisusbcon_invert_region,
+ .con_set_origin = sisusbcon_set_origin,
+ .con_save_screen = sisusbcon_save_screen,
+ .con_resize = sisusbcon_resize,
+};
+
+/* Our very own dummy console driver */
+
+static const char *sisusbdummycon_startup(void)
+{
+ return "SISUSBVGADUMMY";
+}
+
+static void sisusbdummycon_init(struct vc_data *vc, int init)
+{
+ vc->vc_can_do_color = 1;
+ if (init) {
+ vc->vc_cols = 80;
+ vc->vc_rows = 25;
+ } else
+ vc_resize(vc, 80, 25);
+}
+
+static int sisusbdummycon_dummy(void)
+{
+ return 0;
+}
+
+#define SISUSBCONDUMMY (void *)sisusbdummycon_dummy
+
+const struct consw sisusb_dummy_con = {
+ .owner = THIS_MODULE,
+ .con_startup = sisusbdummycon_startup,
+ .con_init = sisusbdummycon_init,
+ .con_deinit = SISUSBCONDUMMY,
+ .con_clear = SISUSBCONDUMMY,
+ .con_putc = SISUSBCONDUMMY,
+ .con_putcs = SISUSBCONDUMMY,
+ .con_cursor = SISUSBCONDUMMY,
+ .con_scroll = SISUSBCONDUMMY,
+ .con_bmove = SISUSBCONDUMMY,
+ .con_switch = SISUSBCONDUMMY,
+ .con_blank = SISUSBCONDUMMY,
+ .con_font_set = SISUSBCONDUMMY,
+ .con_font_get = SISUSBCONDUMMY,
+ .con_font_default = SISUSBCONDUMMY,
+ .con_font_copy = SISUSBCONDUMMY,
+ .con_set_palette = SISUSBCONDUMMY,
+ .con_scrolldelta = SISUSBCONDUMMY,
+};
+
+int
+sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
+{
+ int i, ret, minor = sisusb->minor;
+
+ down(&disconnect_sem);
+
+ down(&sisusb->lock);
+
+ /* Erm.. that should not happen */
+ if (sisusb->haveconsole || !sisusb->SiS_Pr) {
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+ return 1;
+ }
+
+ sisusb->con_first = first;
+ sisusb->con_last = last;
+
+ if (first > last ||
+ first > MAX_NR_CONSOLES ||
+ last > MAX_NR_CONSOLES) {
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+ return 1;
+ }
+
+ /* If gfxcore not initialized or no consoles given, quit graciously */
+ if (!sisusb->gfxinit || first < 1 || last < 1) {
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+ return 0;
+ }
+
+ sisusb->sisusb_cursor_loc = -1;
+ sisusb->sisusb_cursor_size_from = -1;
+ sisusb->sisusb_cursor_size_to = -1;
+
+ /* Set up text mode (and upload default font) */
+ if (sisusb_reset_text_mode(sisusb, 1)) {
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+ printk(KERN_ERR
+ "sisusbvga[%d]: Failed to set up text mode\n",
+ minor);
+ return 1;
+ }
+
+ /* Initialize some gfx registers */
+ sisusb_initialize(sisusb);
+
+ for (i = first - 1; i <= last - 1; i++) {
+ /* Save sisusb for our interface routines */
+ mysisusbs[i] = sisusb;
+ }
+
+ /* Initial console setup */
+ sisusb->sisusb_num_columns = 80;
+
+ /* Use a 32K buffer (matches b8000-bffff area) */
+ sisusb->scrbuf_size = 32 * 1024;
+
+ /* Allocate screen buffer */
+ if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) {
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+ printk(KERN_ERR
+ "sisusbvga[%d]: Failed to allocate screen buffer\n",
+ minor);
+ return 1;
+ }
+
+ up(&sisusb->lock);
+ up(&disconnect_sem);
+
+ /* Now grab the desired console(s) */
+ ret = take_over_console(&sisusb_con, first - 1, last - 1, 0);
+
+ if (!ret)
+ sisusb->haveconsole = 1;
+ else {
+ for (i = first - 1; i <= last - 1; i++)
+ mysisusbs[i] = NULL;
+ }
+
+ return ret;
+}
+
+void
+sisusb_console_exit(struct sisusb_usb_data *sisusb)
+{
+ int i;
+
+ /* This is called if the device is disconnected
+ * and while disconnect and lock semaphores
+ * are up. This should be save because we
+ * can't lose our sisusb any other way but by
+ * disconnection (and hence, the disconnect
+ * sema is for protecting all other access
+ * functions from disconnection, not the
+ * other way round).
+ */
+
+ /* Now what do we do in case of disconnection:
+ * One alternative would be to simply call
+ * give_up_console(). Nah, not a good idea.
+ * give_up_console() is obviously buggy as it
+ * only discards the consw pointer from the
+ * driver_map, but doesn't adapt vc->vc_sw
+ * of the affected consoles. Hence, the next
+ * call to any of the console functions will
+ * eventually take a trip to oops county.
+ * Also, give_up_console for some reason
+ * doesn't decrement our module refcount.
+ * Instead, we switch our consoles to a private
+ * dummy console. This, of course, keeps our
+ * refcount up as well, but it works perfectly.
+ */
+
+ if (sisusb->haveconsole) {
+ for (i = 0; i < MAX_NR_CONSOLES; i++)
+ if (sisusb->havethisconsole[i])
+ take_over_console(&sisusb_dummy_con, i, i, 0);
+ /* At this point, con_deinit for all our
+ * consoles is executed by take_over_console().
+ */
+ sisusb->haveconsole = 0;
+ }
+
+ vfree((void *)sisusb->scrbuf);
+ sisusb->scrbuf = 0;
+
+ vfree(sisusb->font_backup);
+ sisusb->font_backup = NULL;
+}
+
+void __init sisusb_init_concode(void)
+{
+ int i;
+
+ for (i = 0; i < MAX_NR_CONSOLES; i++)
+ mysisusbs[i] = NULL;
+}
+
+#endif /* INCL_CON */
+
+
+
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
new file mode 100644
index 0000000..f28bc24
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -0,0 +1,1047 @@
+/*
+ * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
+ *
+ * Display mode initializing code
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, this code is licensed under the
+ * terms of the GPL v2.
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * * notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * * notice, this list of conditions and the following disclaimer in the
+ * * documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * * derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+
+#include "sisusb.h"
+
+#ifdef INCL_SISUSB_CON
+
+#include "sisusb_init.h"
+
+/*********************************************/
+/* POINTER INITIALIZATION */
+/*********************************************/
+
+static void
+SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
+{
+ SiS_Pr->SiS_ModeResInfo = SiSUSB_ModeResInfo;
+ SiS_Pr->SiS_StandTable = SiSUSB_StandTable;
+
+ SiS_Pr->SiS_SModeIDTable = SiSUSB_SModeIDTable;
+ SiS_Pr->SiS_EModeIDTable = SiSUSB_EModeIDTable;
+ SiS_Pr->SiS_RefIndex = SiSUSB_RefIndex;
+ SiS_Pr->SiS_CRT1Table = SiSUSB_CRT1Table;
+
+ SiS_Pr->SiS_VCLKData = SiSUSB_VCLKData;
+}
+
+/*********************************************/
+/* HELPER: Get ModeID */
+/*********************************************/
+
+unsigned short
+SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth)
+{
+ unsigned short ModeIndex = 0;
+
+ switch (HDisplay)
+ {
+ case 320:
+ if (VDisplay == 200)
+ ModeIndex = ModeIndex_320x200[Depth];
+ else if (VDisplay == 240)
+ ModeIndex = ModeIndex_320x240[Depth];
+ break;
+ case 400:
+ if (VDisplay == 300)
+ ModeIndex = ModeIndex_400x300[Depth];
+ break;
+ case 512:
+ if (VDisplay == 384)
+ ModeIndex = ModeIndex_512x384[Depth];
+ break;
+ case 640:
+ if (VDisplay == 480)
+ ModeIndex = ModeIndex_640x480[Depth];
+ else if (VDisplay == 400)
+ ModeIndex = ModeIndex_640x400[Depth];
+ break;
+ case 720:
+ if (VDisplay == 480)
+ ModeIndex = ModeIndex_720x480[Depth];
+ else if (VDisplay == 576)
+ ModeIndex = ModeIndex_720x576[Depth];
+ break;
+ case 768:
+ if (VDisplay == 576)
+ ModeIndex = ModeIndex_768x576[Depth];
+ break;
+ case 800:
+ if (VDisplay == 600)
+ ModeIndex = ModeIndex_800x600[Depth];
+ else if (VDisplay == 480)
+ ModeIndex = ModeIndex_800x480[Depth];
+ break;
+ case 848:
+ if (VDisplay == 480)
+ ModeIndex = ModeIndex_848x480[Depth];
+ break;
+ case 856:
+ if (VDisplay == 480)
+ ModeIndex = ModeIndex_856x480[Depth];
+ break;
+ case 960:
+ if (VDisplay == 540)
+ ModeIndex = ModeIndex_960x540[Depth];
+ else if (VDisplay == 600)
+ ModeIndex = ModeIndex_960x600[Depth];
+ break;
+ case 1024:
+ if (VDisplay == 576)
+ ModeIndex = ModeIndex_1024x576[Depth];
+ else if (VDisplay == 768)
+ ModeIndex = ModeIndex_1024x768[Depth];
+ break;
+ case 1152:
+ if (VDisplay == 864)
+ ModeIndex = ModeIndex_1152x864[Depth];
+ break;
+ case 1280:
+ switch (VDisplay) {
+ case 720:
+ ModeIndex = ModeIndex_1280x720[Depth];
+ break;
+ case 768:
+ ModeIndex = ModeIndex_1280x768[Depth];
+ break;
+ case 1024:
+ ModeIndex = ModeIndex_1280x1024[Depth];
+ break;
+ }
+ }
+
+ return ModeIndex;
+}
+
+/*********************************************/
+/* HELPER: SetReg, GetReg */
+/*********************************************/
+
+static void
+SiS_SetReg(struct SiS_Private *SiS_Pr, unsigned long port,
+ unsigned short index, unsigned short data)
+{
+ sisusb_setidxreg(SiS_Pr->sisusb, port, index, data);
+}
+
+static void
+SiS_SetRegByte(struct SiS_Private *SiS_Pr, unsigned long port,
+ unsigned short data)
+{
+ sisusb_setreg(SiS_Pr->sisusb, port, data);
+}
+
+static unsigned char
+SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port,
+ unsigned short index)
+{
+ u8 data;
+
+ sisusb_getidxreg(SiS_Pr->sisusb, port, index, &data);
+
+ return data;
+}
+
+static unsigned char
+SiS_GetRegByte(struct SiS_Private *SiS_Pr, unsigned long port)
+{
+ u8 data;
+
+ sisusb_getreg(SiS_Pr->sisusb, port, &data);
+
+ return data;
+}
+
+static void
+SiS_SetRegANDOR(struct SiS_Private *SiS_Pr, unsigned long port,
+ unsigned short index, unsigned short DataAND,
+ unsigned short DataOR)
+{
+ sisusb_setidxregandor(SiS_Pr->sisusb, port, index, DataAND, DataOR);
+}
+
+static void
+SiS_SetRegAND(struct SiS_Private *SiS_Pr, unsigned long port,
+ unsigned short index, unsigned short DataAND)
+{
+ sisusb_setidxregand(SiS_Pr->sisusb, port, index, DataAND);
+}
+
+static void
+SiS_SetRegOR(struct SiS_Private *SiS_Pr,unsigned long port,
+ unsigned short index, unsigned short DataOR)
+{
+ sisusb_setidxregor(SiS_Pr->sisusb, port, index, DataOR);
+}
+
+/*********************************************/
+/* HELPER: DisplayOn, DisplayOff */
+/*********************************************/
+
+static void
+SiS_DisplayOn(struct SiS_Private *SiS_Pr)
+{
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0xDF);
+}
+
+/*********************************************/
+/* HELPER: Init Port Addresses */
+/*********************************************/
+
+void
+SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
+{
+ SiS_Pr->SiS_P3c4 = BaseAddr + 0x14;
+ SiS_Pr->SiS_P3d4 = BaseAddr + 0x24;
+ SiS_Pr->SiS_P3c0 = BaseAddr + 0x10;
+ SiS_Pr->SiS_P3ce = BaseAddr + 0x1e;
+ SiS_Pr->SiS_P3c2 = BaseAddr + 0x12;
+ SiS_Pr->SiS_P3ca = BaseAddr + 0x1a;
+ SiS_Pr->SiS_P3c6 = BaseAddr + 0x16;
+ SiS_Pr->SiS_P3c7 = BaseAddr + 0x17;
+ SiS_Pr->SiS_P3c8 = BaseAddr + 0x18;
+ SiS_Pr->SiS_P3c9 = BaseAddr + 0x19;
+ SiS_Pr->SiS_P3cb = BaseAddr + 0x1b;
+ SiS_Pr->SiS_P3cc = BaseAddr + 0x1c;
+ SiS_Pr->SiS_P3cd = BaseAddr + 0x1d;
+ SiS_Pr->SiS_P3da = BaseAddr + 0x2a;
+ SiS_Pr->SiS_Part1Port = BaseAddr + SIS_CRT2_PORT_04;
+}
+
+/*********************************************/
+/* HELPER: GetSysFlags */
+/*********************************************/
+
+static void
+SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
+{
+ SiS_Pr->SiS_MyCR63 = 0x63;
+}
+
+/*********************************************/
+/* HELPER: Init PCI & Engines */
+/*********************************************/
+
+static void
+SiSInitPCIetc(struct SiS_Private *SiS_Pr)
+{
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x20, 0xa1);
+ /* - Enable 2D (0x40)
+ * - Enable 3D (0x02)
+ * - Enable 3D vertex command fetch (0x10)
+ * - Enable 3D command parser (0x08)
+ * - Enable 3D G/L transformation engine (0x80)
+ */
+ SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1E, 0xDA);
+}
+
+/*********************************************/
+/* HELPER: SET SEGMENT REGISTERS */
+/*********************************************/
+
+static void
+SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+ unsigned short temp;
+
+ value &= 0x00ff;
+ temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb) & 0xf0;
+ temp |= (value >> 4);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb, temp);
+ temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd) & 0xf0;
+ temp |= (value & 0x0f);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
+}
+
+static void
+SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+ unsigned short temp;
+
+ value &= 0x00ff;
+ temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb) & 0x0f;
+ temp |= (value & 0xf0);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb, temp);
+ temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd) & 0x0f;
+ temp |= (value << 4);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
+}
+
+static void
+SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+ SiS_SetSegRegLower(SiS_Pr, value);
+ SiS_SetSegRegUpper(SiS_Pr, value);
+}
+
+static void
+SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr)
+{
+ SiS_SetSegmentReg(SiS_Pr, 0);
+}
+
+static void
+SiS_SetSegmentRegOver(struct SiS_Private *SiS_Pr, unsigned short value)
+{
+ unsigned short temp = value >> 8;
+
+ temp &= 0x07;
+ temp |= (temp << 4);
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1d, temp);
+ SiS_SetSegmentReg(SiS_Pr, value);
+}
+
+static void
+SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr)
+{
+ SiS_SetSegmentRegOver(SiS_Pr, 0);
+}
+
+static void
+SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
+{
+ SiS_ResetSegmentReg(SiS_Pr);
+ SiS_ResetSegmentRegOver(SiS_Pr);
+}
+
+/*********************************************/
+/* HELPER: SearchModeID */
+/*********************************************/
+
+static int
+SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
+ unsigned short *ModeIdIndex)
+{
+ if ((*ModeNo) <= 0x13) {
+
+ if ((*ModeNo) != 0x03)
+ return 0;
+
+ (*ModeIdIndex) = 0;
+
+ } else {
+
+ for(*ModeIdIndex = 0; ;(*ModeIdIndex)++) {
+
+ if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == (*ModeNo))
+ break;
+
+ if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+ return 0;
+ }
+
+ }
+
+ return 1;
+}
+
+/*********************************************/
+/* HELPER: ENABLE CRT1 */
+/*********************************************/
+
+static void
+SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
+{
+ /* Enable CRT1 gating */
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, SiS_Pr->SiS_MyCR63, 0xbf);
+}
+
+/*********************************************/
+/* HELPER: GetColorDepth */
+/*********************************************/
+
+static unsigned short
+SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex)
+{
+ static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8};
+ unsigned short modeflag;
+ short index;
+
+ if (ModeNo <= 0x13) {
+ modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
+ } else {
+ modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ }
+
+ index = (modeflag & ModeTypeMask) - ModeEGA;
+ if (index < 0) index = 0;
+ return ColorDepth[index];
+}
+
+/*********************************************/
+/* HELPER: GetOffset */
+/*********************************************/
+
+static unsigned short
+SiS_GetOffset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex, unsigned short rrti)
+{
+ unsigned short xres, temp, colordepth, infoflag;
+
+ infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+ xres = SiS_Pr->SiS_RefIndex[rrti].XRes;
+
+ colordepth = SiS_GetColorDepth(SiS_Pr, ModeNo, ModeIdIndex);
+
+ temp = xres / 16;
+
+ if (infoflag & InterlaceMode)
+ temp <<= 1;
+
+ temp *= colordepth;
+
+ if (xres % 16)
+ temp += (colordepth >> 1);
+
+ return temp;
+}
+
+/*********************************************/
+/* SEQ */
+/*********************************************/
+
+static void
+SiS_SetSeqRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+ unsigned char SRdata;
+ int i;
+
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x00, 0x03);
+
+ SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[0] | 0x20;
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, SRdata);
+
+ for(i = 2; i <= 4; i++) {
+ SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i-1];
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, SRdata);
+ }
+}
+
+/*********************************************/
+/* MISC */
+/*********************************************/
+
+static void
+SiS_SetMiscRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+ unsigned char Miscdata = SiS_Pr->SiS_StandTable[StandTableIndex].MISC;
+
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c2, Miscdata);
+}
+
+/*********************************************/
+/* CRTC */
+/*********************************************/
+
+static void
+SiS_SetCRTCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+ unsigned char CRTCdata;
+ unsigned short i;
+
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
+
+ for(i = 0; i <= 0x18; i++) {
+ CRTCdata = SiS_Pr->SiS_StandTable[StandTableIndex].CRTC[i];
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, i, CRTCdata);
+ }
+}
+
+/*********************************************/
+/* ATT */
+/*********************************************/
+
+static void
+SiS_SetATTRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+ unsigned char ARdata;
+ unsigned short i;
+
+ for(i = 0; i <= 0x13; i++) {
+ ARdata = SiS_Pr->SiS_StandTable[StandTableIndex].ATTR[i];
+ SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, i);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, ARdata);
+ }
+ SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x14);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x00);
+
+ SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x20);
+ SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
+}
+
+/*********************************************/
+/* GRC */
+/*********************************************/
+
+static void
+SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
+{
+ unsigned char GRdata;
+ unsigned short i;
+
+ for(i = 0; i <= 0x08; i++) {
+ GRdata = SiS_Pr->SiS_StandTable[StandTableIndex].GRC[i];
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3ce, i, GRdata);
+ }
+
+ if (SiS_Pr->SiS_ModeType > ModeVGA) {
+ /* 256 color disable */
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3ce, 0x05, 0xBF);
+ }
+}
+
+/*********************************************/
+/* CLEAR EXTENDED REGISTERS */
+/*********************************************/
+
+static void
+SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+{
+ int i;
+
+ for(i = 0x0A; i <= 0x0E; i++) {
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, 0x00);
+ }
+
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x37, 0xFE);
+}
+
+/*********************************************/
+/* Get rate index */
+/*********************************************/
+
+static unsigned short
+SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex)
+{
+ unsigned short rrti, i, index, temp;
+
+ if (ModeNo <= 0x13)
+ return 0xFFFF;
+
+ index = SiS_GetReg(SiS_Pr,SiS_Pr->SiS_P3d4, 0x33) & 0x0F;
+ if (index > 0) index--;
+
+ rrti = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].REFindex;
+ ModeNo = SiS_Pr->SiS_RefIndex[rrti].ModeID;
+
+ i = 0;
+ do {
+ if (SiS_Pr->SiS_RefIndex[rrti + i].ModeID != ModeNo)
+ break;
+
+ temp = SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask;
+ if (temp < SiS_Pr->SiS_ModeType)
+ break;
+
+ i++;
+ index--;
+ } while(index != 0xFFFF);
+
+ i--;
+
+ return (rrti + i);
+}
+
+/*********************************************/
+/* SYNC */
+/*********************************************/
+
+static void
+SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
+{
+ unsigned short sync = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag >> 8;
+ sync &= 0xC0;
+ sync |= 0x2f;
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c2, sync);
+}
+
+/*********************************************/
+/* CRTC/2 */
+/*********************************************/
+
+static void
+SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex, unsigned short rrti)
+{
+ unsigned char index;
+ unsigned short temp, i, j, modeflag;
+
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4,0x11,0x7f);
+
+ modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+
+ index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRT1CRTC;
+
+ for(i = 0,j = 0; i <= 7; i++, j++) {
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ }
+ for(j = 0x10; i <= 10; i++, j++) {
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ }
+ for(j = 0x15; i <= 12; i++, j++) {
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ }
+ for(j = 0x0A; i <= 15; i++, j++) {
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, j,
+ SiS_Pr->SiS_CRT1Table[index].CR[i]);
+ }
+
+ temp = SiS_Pr->SiS_CRT1Table[index].CR[16] & 0xE0;
+ SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4, 0x0E, temp);
+
+ temp = ((SiS_Pr->SiS_CRT1Table[index].CR[16]) & 0x01) << 5;
+ if (modeflag & DoubleScanMode) temp |= 0x80;
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x09, 0x5F, temp);
+
+ if (SiS_Pr->SiS_ModeType > ModeVGA)
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x14, 0x4F);
+}
+
+/*********************************************/
+/* OFFSET & PITCH */
+/*********************************************/
+/* (partly overruled by SetPitch() in XF86) */
+/*********************************************/
+
+static void
+SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex, unsigned short rrti)
+{
+ unsigned short du = SiS_GetOffset(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+ unsigned short infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+ unsigned short temp;
+
+ temp = (du >> 8) & 0x0f;
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0E, 0xF0, temp);
+
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x13, (du & 0xFF));
+
+ if (infoflag & InterlaceMode) du >>= 1;
+
+ du <<= 5;
+ temp = (du >> 8) & 0xff;
+ if (du & 0xff) temp++;
+ temp++;
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x10, temp);
+}
+
+/*********************************************/
+/* VCLK */
+/*********************************************/
+
+static void
+SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short rrti)
+{
+ unsigned short index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK;
+ unsigned short clka = SiS_Pr->SiS_VCLKData[index].SR2B;
+ unsigned short clkb = SiS_Pr->SiS_VCLKData[index].SR2C;
+
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4,0x31,0xCF);
+
+ SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2B,clka);
+ SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2C,clkb);
+ SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2D,0x01);
+}
+
+/*********************************************/
+/* FIFO */
+/*********************************************/
+
+static void
+SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short mi)
+{
+ unsigned short modeflag = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag;
+
+ /* disable auto-threshold */
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x3D, 0xFE);
+
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x08, 0xAE);
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x09, 0xF0);
+
+ if (ModeNo <= 0x13)
+ return;
+
+ if ((!(modeflag & DoubleScanMode)) || (!(modeflag & HalfDCLK))) {
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x08, 0x34);
+ SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x3D, 0x01);
+ }
+}
+
+/*********************************************/
+/* MODE REGISTERS */
+/*********************************************/
+
+static void
+SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short rrti)
+{
+ unsigned short data = 0, VCLK = 0, index = 0;
+
+ if (ModeNo > 0x13) {
+ index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK;
+ VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK;
+ }
+
+ if (VCLK >= 166) data |= 0x0c;
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x32, 0xf3, data);
+
+ if (VCLK >= 166)
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1f, 0xe7);
+
+ /* DAC speed */
+ data = 0x03;
+ if (VCLK >= 260)
+ data = 0x00;
+ else if (VCLK >= 160)
+ data = 0x01;
+ else if (VCLK >= 135)
+ data = 0x02;
+
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x07, 0xF8, data);
+}
+
+static void
+SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex, unsigned short rrti)
+{
+ unsigned short data, infoflag = 0, modeflag;
+
+ if (ModeNo <= 0x13)
+ modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
+ else {
+ modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+ infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+ }
+
+ /* Disable DPMS */
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1F, 0x3F);
+
+ data = 0;
+ if (ModeNo > 0x13) {
+ if (SiS_Pr->SiS_ModeType > ModeEGA) {
+ data |= 0x02;
+ data |= ((SiS_Pr->SiS_ModeType - ModeVGA) << 2);
+ }
+ if (infoflag & InterlaceMode) data |= 0x20;
+ }
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x06, 0xC0, data);
+
+ data = 0;
+ if (infoflag & InterlaceMode) {
+ /* data = (Hsync / 8) - ((Htotal / 8) / 2) + 3 */
+ unsigned short hrs = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) |
+ ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2)) - 3;
+ unsigned short hto = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) |
+ ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8)) + 5;
+ data = hrs - (hto >> 1) + 3;
+ }
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x19, (data & 0xFF));
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x1a, 0xFC, (data >> 8));
+
+ if (modeflag & HalfDCLK)
+ SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0x08);
+
+ data = 0;
+ if (modeflag & LineCompareOff)
+ data = 0x08;
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0F, 0xB7, data);
+
+ if ((SiS_Pr->SiS_ModeType == ModeEGA) && (ModeNo > 0x13))
+ SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0F, 0x40);
+
+ SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x31, 0xfb);
+
+ data = 0x60;
+ if (SiS_Pr->SiS_ModeType != ModeText) {
+ data ^= 0x60;
+ if (SiS_Pr->SiS_ModeType != ModeEGA)
+ data ^= 0xA0;
+ }
+ SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x21, 0x1F, data);
+
+ SiS_SetVCLKState(SiS_Pr, ModeNo, rrti);
+
+ if (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x31) & 0x40)
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x52, 0x2c);
+ else
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x52, 0x6c);
+}
+
+/*********************************************/
+/* LOAD DAC */
+/*********************************************/
+
+static void
+SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData,
+ unsigned short shiftflag, unsigned short dl, unsigned short ah,
+ unsigned short al, unsigned short dh)
+{
+ unsigned short d1, d2, d3;
+
+ switch (dl) {
+ case 0:
+ d1 = dh; d2 = ah; d3 = al;
+ break;
+ case 1:
+ d1 = ah; d2 = al; d3 = dh;
+ break;
+ default:
+ d1 = al; d2 = dh; d3 = ah;
+ }
+ SiS_SetRegByte(SiS_Pr, DACData, (d1 << shiftflag));
+ SiS_SetRegByte(SiS_Pr, DACData, (d2 << shiftflag));
+ SiS_SetRegByte(SiS_Pr, DACData, (d3 << shiftflag));
+}
+
+static void
+SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi)
+{
+ unsigned short data, data2, time, i, j, k, m, n, o;
+ unsigned short si, di, bx, sf;
+ unsigned long DACAddr, DACData;
+ const unsigned char *table = NULL;
+
+ if (ModeNo < 0x13)
+ data = SiS_Pr->SiS_SModeIDTable[mi].St_ModeFlag;
+ else
+ data = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag;
+
+ data &= DACInfoFlag;
+
+ j = time = 64;
+ if (data == 0x00)
+ table = SiS_MDA_DAC;
+ else if (data == 0x08)
+ table = SiS_CGA_DAC;
+ else if (data == 0x10)
+ table = SiS_EGA_DAC;
+ else {
+ j = 16;
+ time = 256;
+ table = SiS_VGA_DAC;
+ }
+
+ DACAddr = SiS_Pr->SiS_P3c8;
+ DACData = SiS_Pr->SiS_P3c9;
+ sf = 0;
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c6, 0xFF);
+
+ SiS_SetRegByte(SiS_Pr, DACAddr, 0x00);
+
+ for(i = 0; i < j; i++) {
+ data = table[i];
+ for(k = 0; k < 3; k++) {
+ data2 = 0;
+ if (data & 0x01) data2 += 0x2A;
+ if (data & 0x02) data2 += 0x15;
+ SiS_SetRegByte(SiS_Pr, DACData, (data2 << sf));
+ data >>= 2;
+ }
+ }
+
+ if (time == 256) {
+ for(i = 16; i < 32; i++) {
+ data = table[i] << sf;
+ for(k = 0; k < 3; k++)
+ SiS_SetRegByte(SiS_Pr, DACData, data);
+ }
+ si = 32;
+ for(m = 0; m < 9; m++) {
+ di = si;
+ bx = si + 4;
+ for(n = 0; n < 3; n++) {
+ for(o = 0; o < 5; o++) {
+ SiS_WriteDAC(SiS_Pr, DACData, sf, n,
+ table[di], table[bx], table[si]);
+ si++;
+ }
+ si -= 2;
+ for(o = 0; o < 3; o++) {
+ SiS_WriteDAC(SiS_Pr, DACData, sf, n,
+ table[di], table[si], table[bx]);
+ si--;
+ }
+ }
+ si += 5;
+ }
+ }
+}
+
+/*********************************************/
+/* SET CRT1 REGISTER GROUP */
+/*********************************************/
+
+static void
+SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+ unsigned short ModeIdIndex)
+{
+ unsigned short StandTableIndex, rrti;
+
+ SiS_Pr->SiS_CRT1Mode = ModeNo;
+
+ if (ModeNo <= 0x13)
+ StandTableIndex = 0;
+ else
+ StandTableIndex = 1;
+
+ SiS_ResetSegmentRegisters(SiS_Pr);
+ SiS_SetSeqRegs(SiS_Pr, StandTableIndex);
+ SiS_SetMiscRegs(SiS_Pr, StandTableIndex);
+ SiS_SetCRTCRegs(SiS_Pr, StandTableIndex);
+ SiS_SetATTRegs(SiS_Pr, StandTableIndex);
+ SiS_SetGRCRegs(SiS_Pr, StandTableIndex);
+ SiS_ClearExt1Regs(SiS_Pr, ModeNo);
+
+ rrti = SiS_GetRatePtr(SiS_Pr, ModeNo, ModeIdIndex);
+
+ if (rrti != 0xFFFF) {
+ SiS_SetCRT1Sync(SiS_Pr, rrti);
+ SiS_SetCRT1CRTC(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+ SiS_SetCRT1Offset(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+ SiS_SetCRT1VCLK(SiS_Pr, ModeNo, rrti);
+ }
+
+ SiS_SetCRT1FIFO_310(SiS_Pr, ModeNo, ModeIdIndex);
+
+ SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, rrti);
+
+ SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex);
+
+ SiS_DisplayOn(SiS_Pr);
+}
+
+/*********************************************/
+/* SiSSetMode() */
+/*********************************************/
+
+int
+SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+{
+ unsigned short ModeIdIndex;
+ unsigned long BaseAddr = SiS_Pr->IOAddress;
+
+ SiSUSB_InitPtr(SiS_Pr);
+ SiSUSBRegInit(SiS_Pr, BaseAddr);
+ SiS_GetSysFlags(SiS_Pr);
+
+ if (!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex)))
+ return 0;
+
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x05, 0x86);
+
+ SiSInitPCIetc(SiS_Pr);
+
+ ModeNo &= 0x7f;
+
+ SiS_Pr->SiS_ModeType =
+ SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask;
+
+ SiS_Pr->SiS_SetFlag = LowModeTests;
+
+ /* Set mode on CRT1 */
+ SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
+
+ SiS_HandleCRT1(SiS_Pr);
+
+ SiS_DisplayOn(SiS_Pr);
+ SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c6, 0xFF);
+
+ /* Store mode number */
+ SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x34, ModeNo);
+
+ return 1;
+}
+
+int
+SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
+{
+ unsigned short ModeNo = 0;
+ int i;
+
+ SiSUSB_InitPtr(SiS_Pr);
+
+ if (VModeNo == 0x03) {
+
+ ModeNo = 0x03;
+
+ } else {
+
+ i = 0;
+ do {
+
+ if (SiS_Pr->SiS_EModeIDTable[i].Ext_VESAID == VModeNo) {
+ ModeNo = SiS_Pr->SiS_EModeIDTable[i].Ext_ModeID;
+ break;
+ }
+
+ } while (SiS_Pr->SiS_EModeIDTable[i++].Ext_ModeID != 0xff);
+
+ }
+
+ if (!ModeNo)
+ return 0;
+
+ return SiSUSBSetMode(SiS_Pr, ModeNo);
+}
+
+#endif /* INCL_SISUSB_CON */
+
+
+
+
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
new file mode 100644
index 0000000..5b11577
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -0,0 +1,830 @@
+/* $XFree86$ */
+/* $XdotOrg$ */
+/*
+ * Data and prototypes for init.c
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, the following license terms
+ * apply:
+ *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of the GNU General Public License as published by
+ * * the Free Software Foundation; either version 2 of the named License,
+ * * or any later version.
+ * *
+ * * This program is distributed in the hope that it will be useful,
+ * * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * * GNU General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * * notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * * notice, this list of conditions and the following disclaimer in the
+ * * documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * * derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_INIT_H_
+#define _SISUSB_INIT_H_
+
+/* SiS_ModeType */
+#define ModeText 0x00
+#define ModeCGA 0x01
+#define ModeEGA 0x02
+#define ModeVGA 0x03
+#define Mode15Bpp 0x04
+#define Mode16Bpp 0x05
+#define Mode24Bpp 0x06
+#define Mode32Bpp 0x07
+
+#define ModeTypeMask 0x07
+#define IsTextMode 0x07
+
+#define DACInfoFlag 0x0018
+#define MemoryInfoFlag 0x01E0
+#define MemorySizeShift 5
+
+/* modeflag */
+#define Charx8Dot 0x0200
+#define LineCompareOff 0x0400
+#define CRT2Mode 0x0800
+#define HalfDCLK 0x1000
+#define NoSupportSimuTV 0x2000
+#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
+#define DoubleScanMode 0x8000
+
+/* Infoflag */
+#define SupportTV 0x0008
+#define SupportTV1024 0x0800
+#define SupportCHTV 0x0800
+#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */
+#define SupportHiVision 0x0010
+#define SupportYPbPr750p 0x1000
+#define SupportLCD 0x0020
+#define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */
+#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */
+#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */
+#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */
+#define InterlaceMode 0x0080
+#define SyncPP 0x0000
+#define SyncPN 0x4000
+#define SyncNP 0x8000
+#define SyncNN 0xc000
+
+/* SetFlag */
+#define ProgrammingCRT2 0x0001
+#define LowModeTests 0x0002
+#define LCDVESATiming 0x0008
+#define EnableLVDSDDA 0x0010
+#define SetDispDevSwitchFlag 0x0020
+#define CheckWinDos 0x0040
+#define SetDOSMode 0x0080
+
+/* Index in ModeResInfo table */
+#define SIS_RI_320x200 0
+#define SIS_RI_320x240 1
+#define SIS_RI_320x400 2
+#define SIS_RI_400x300 3
+#define SIS_RI_512x384 4
+#define SIS_RI_640x400 5
+#define SIS_RI_640x480 6
+#define SIS_RI_800x600 7
+#define SIS_RI_1024x768 8
+#define SIS_RI_1280x1024 9
+#define SIS_RI_1600x1200 10
+#define SIS_RI_1920x1440 11
+#define SIS_RI_2048x1536 12
+#define SIS_RI_720x480 13
+#define SIS_RI_720x576 14
+#define SIS_RI_1280x960 15
+#define SIS_RI_800x480 16
+#define SIS_RI_1024x576 17
+#define SIS_RI_1280x720 18
+#define SIS_RI_856x480 19
+#define SIS_RI_1280x768 20
+#define SIS_RI_1400x1050 21
+#define SIS_RI_1152x864 22 /* Up to here SiS conforming */
+#define SIS_RI_848x480 23
+#define SIS_RI_1360x768 24
+#define SIS_RI_1024x600 25
+#define SIS_RI_1152x768 26
+#define SIS_RI_768x576 27
+#define SIS_RI_1360x1024 28
+#define SIS_RI_1680x1050 29
+#define SIS_RI_1280x800 30
+#define SIS_RI_1920x1080 31
+#define SIS_RI_960x540 32
+#define SIS_RI_960x600 33
+
+#define SIS_VIDEO_CAPTURE 0x00 - 0x30
+#define SIS_VIDEO_PLAYBACK 0x02 - 0x30
+#define SIS_CRT2_PORT_04 0x04 - 0x30
+
+/* Mode numbers */
+static const unsigned short ModeIndex_320x200[] = {0x59, 0x41, 0x00, 0x4f};
+static const unsigned short ModeIndex_320x240[] = {0x50, 0x56, 0x00, 0x53};
+static const unsigned short ModeIndex_400x300[] = {0x51, 0x57, 0x00, 0x54};
+static const unsigned short ModeIndex_512x384[] = {0x52, 0x58, 0x00, 0x5c};
+static const unsigned short ModeIndex_640x400[] = {0x2f, 0x5d, 0x00, 0x5e};
+static const unsigned short ModeIndex_640x480[] = {0x2e, 0x44, 0x00, 0x62};
+static const unsigned short ModeIndex_720x480[] = {0x31, 0x33, 0x00, 0x35};
+static const unsigned short ModeIndex_720x576[] = {0x32, 0x34, 0x00, 0x36};
+static const unsigned short ModeIndex_768x576[] = {0x5f, 0x60, 0x00, 0x61};
+static const unsigned short ModeIndex_800x480[] = {0x70, 0x7a, 0x00, 0x76};
+static const unsigned short ModeIndex_800x600[] = {0x30, 0x47, 0x00, 0x63};
+static const unsigned short ModeIndex_848x480[] = {0x39, 0x3b, 0x00, 0x3e};
+static const unsigned short ModeIndex_856x480[] = {0x3f, 0x42, 0x00, 0x45};
+static const unsigned short ModeIndex_960x540[] = {0x1d, 0x1e, 0x00, 0x1f};
+static const unsigned short ModeIndex_960x600[] = {0x20, 0x21, 0x00, 0x22};
+static const unsigned short ModeIndex_1024x768[] = {0x38, 0x4a, 0x00, 0x64};
+static const unsigned short ModeIndex_1024x576[] = {0x71, 0x74, 0x00, 0x77};
+static const unsigned short ModeIndex_1152x864[] = {0x29, 0x2a, 0x00, 0x2b};
+static const unsigned short ModeIndex_1280x720[] = {0x79, 0x75, 0x00, 0x78};
+static const unsigned short ModeIndex_1280x768[] = {0x23, 0x24, 0x00, 0x25};
+static const unsigned short ModeIndex_1280x1024[] = {0x3a, 0x4d, 0x00, 0x65};
+
+static const unsigned char SiS_MDA_DAC[] =
+{
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F
+};
+
+static const unsigned char SiS_CGA_DAC[] =
+{
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F
+};
+
+static const unsigned char SiS_EGA_DAC[] =
+{
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
+ 0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
+ 0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
+ 0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
+ 0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
+ 0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
+ 0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F
+};
+
+static const unsigned char SiS_VGA_DAC[] =
+{
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
+ 0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
+ 0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
+ 0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
+ 0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
+ 0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
+ 0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
+ 0x0B,0x0C,0x0D,0x0F,0x10
+};
+
+static const struct SiS_St SiSUSB_SModeIDTable[] =
+{
+ {0x03,0x0010,0x18,0x02,0x02,0x00,0x01,0x03,0x40},
+ {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+static const struct SiS_StResInfo_S SiSUSB_StResInfo[] =
+{
+ { 640,400},
+ { 640,350},
+ { 720,400},
+ { 720,350},
+ { 640,480}
+};
+
+static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] =
+{
+ { 320, 200, 8, 8}, /* 0x00 */
+ { 320, 240, 8, 8}, /* 0x01 */
+ { 320, 400, 8, 8}, /* 0x02 */
+ { 400, 300, 8, 8}, /* 0x03 */
+ { 512, 384, 8, 8}, /* 0x04 */
+ { 640, 400, 8,16}, /* 0x05 */
+ { 640, 480, 8,16}, /* 0x06 */
+ { 800, 600, 8,16}, /* 0x07 */
+ { 1024, 768, 8,16}, /* 0x08 */
+ { 1280,1024, 8,16}, /* 0x09 */
+ { 1600,1200, 8,16}, /* 0x0a */
+ { 1920,1440, 8,16}, /* 0x0b */
+ { 2048,1536, 8,16}, /* 0x0c */
+ { 720, 480, 8,16}, /* 0x0d */
+ { 720, 576, 8,16}, /* 0x0e */
+ { 1280, 960, 8,16}, /* 0x0f */
+ { 800, 480, 8,16}, /* 0x10 */
+ { 1024, 576, 8,16}, /* 0x11 */
+ { 1280, 720, 8,16}, /* 0x12 */
+ { 856, 480, 8,16}, /* 0x13 */
+ { 1280, 768, 8,16}, /* 0x14 */
+ { 1400,1050, 8,16}, /* 0x15 */
+ { 1152, 864, 8,16}, /* 0x16 */
+ { 848, 480, 8,16}, /* 0x17 */
+ { 1360, 768, 8,16}, /* 0x18 */
+ { 1024, 600, 8,16}, /* 0x19 */
+ { 1152, 768, 8,16}, /* 0x1a */
+ { 768, 576, 8,16}, /* 0x1b */
+ { 1360,1024, 8,16}, /* 0x1c */
+ { 1680,1050, 8,16}, /* 0x1d */
+ { 1280, 800, 8,16}, /* 0x1e */
+ { 1920,1080, 8,16}, /* 0x1f */
+ { 960, 540, 8,16}, /* 0x20 */
+ { 960, 600, 8,16} /* 0x21 */
+};
+
+static const struct SiS_StandTable SiSUSB_StandTable[] =
+{
+ /* MD_3_400 - mode 0x03 - 400 */
+ {
+ 0x50,0x18,0x10,0x1000,
+ { 0x00,0x03,0x00,0x02 },
+ 0x67,
+ { 0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+ 0xff },
+ { 0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x0c,0x00,0x0f,0x08 },
+ { 0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00, 0xff }
+ },
+ /* Generic for VGA and higher */
+ {
+ 0x00,0x00,0x00,0x0000,
+ { 0x01,0x0f,0x00,0x0e },
+ 0x23,
+ { 0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
+ 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
+ 0xff },
+ { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+ 0x01,0x00,0x00,0x00 },
+ { 0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f, 0xff }
+ }
+};
+
+static const struct SiS_Ext SiSUSB_EModeIDTable[] =
+{
+ {0x2e,0x0a1b,0x0101,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x8 */
+ {0x2f,0x0a1b,0x0100,SIS_RI_640x400, 0x00,0x00,0x05,0x05,0x10, 0}, /* 640x400x8 */
+ {0x30,0x2a1b,0x0103,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x8 */
+ {0x31,0x4a1b,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x8 */
+ {0x32,0x4a1b,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x8 */
+ {0x33,0x4a1d,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x16 */
+ {0x34,0x6a1d,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x16 */
+ {0x35,0x4a1f,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x32 */
+ {0x36,0x6a1f,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x32 */
+ {0x38,0x0a1b,0x0105,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x8 */
+ {0x3a,0x0e3b,0x0107,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x8 */
+ {0x41,0x9a1d,0x010e,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x16 */
+ {0x44,0x0a1d,0x0111,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x16 */
+ {0x47,0x2a1d,0x0114,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x16 */
+ {0x4a,0x0a3d,0x0117,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x16 */
+ {0x4d,0x0e7d,0x011a,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x16 */
+ {0x50,0x9a1b,0x0132,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x8 */
+ {0x51,0xba1b,0x0133,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x8 */
+ {0x52,0xba1b,0x0134,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x8 */
+ {0x56,0x9a1d,0x0135,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x16 */
+ {0x57,0xba1d,0x0136,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x16 */
+ {0x58,0xba1d,0x0137,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x16 */
+ {0x59,0x9a1b,0x0138,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x8 */
+ {0x5c,0xba1f,0x0000,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x32 */
+ {0x5d,0x0a1d,0x0139,SIS_RI_640x400, 0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x16 */
+ {0x5e,0x0a1f,0x0000,SIS_RI_640x400, 0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x32 */
+ {0x62,0x0a3f,0x013a,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x32 */
+ {0x63,0x2a3f,0x013b,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x32 */
+ {0x64,0x0a7f,0x013c,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x32 */
+ {0x65,0x0eff,0x013d,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x32 */
+ {0x70,0x6a1b,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x8 */
+ {0x71,0x4a1b,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x8 */
+ {0x74,0x4a1d,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x16 */
+ {0x75,0x0a3d,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x16 */
+ {0x76,0x6a1f,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x32 */
+ {0x77,0x4a1f,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x32 */
+ {0x78,0x0a3f,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x32 */
+ {0x79,0x0a3b,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x8 */
+ {0x7a,0x6a1d,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x16 */
+ {0x23,0x0e3b,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x8 */
+ {0x24,0x0e7d,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x16 */
+ {0x25,0x0eff,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x32 */
+ {0x39,0x6a1b,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1}, /* 848x480 */
+ {0x3b,0x6a3d,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1},
+ {0x3e,0x6a7f,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1},
+ {0x3f,0x6a1b,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1}, /* 856x480 */
+ {0x42,0x6a3d,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1},
+ {0x45,0x6a7f,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1},
+ {0x4f,0x9a1f,0x0000,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x32 */
+ {0x53,0x9a1f,0x0000,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x32 */
+ {0x54,0xba1f,0x0000,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x32 */
+ {0x5f,0x6a1b,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1}, /* 768x576 */
+ {0x60,0x6a1d,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1},
+ {0x61,0x6a3f,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1},
+ {0x1d,0x6a1b,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1}, /* 960x540 */
+ {0x1e,0x6a3d,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1},
+ {0x1f,0x6a7f,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1},
+ {0x20,0x6a1b,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1}, /* 960x600 */
+ {0x21,0x6a3d,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1},
+ {0x22,0x6a7f,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1},
+ {0x29,0x4e1b,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1}, /* 1152x864 */
+ {0x2a,0x4e3d,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1},
+ {0x2b,0x4e7f,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1},
+ {0xff,0x0000,0x0000,0, 0x00,0x00,0x00,0x00,0x00,-1}
+};
+
+static const struct SiS_Ext2 SiSUSB_RefIndex[] =
+{
+ {0x085f,0x0d,0x03,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x0 */
+ {0x0067,0x0e,0x04,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x1 */
+ {0x0067,0x0f,0x08,0x48,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x2 */
+ {0x0067,0x10,0x07,0x8b,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x3 */
+ {0x0047,0x11,0x0a,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x4 */
+ {0x0047,0x12,0x0d,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x5 */
+ {0x0047,0x13,0x13,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x6 */
+ {0x0107,0x14,0x1c,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x7 */
+ {0xc85f,0x05,0x00,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x8 */
+ {0xc067,0x06,0x02,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x9 */
+ {0xc067,0x07,0x02,0x47,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xa */
+ {0xc067,0x08,0x03,0x8a,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xb */
+ {0xc047,0x09,0x05,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xc */
+ {0xc047,0x0a,0x09,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xd */
+ {0xc047,0x0b,0x0e,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xe */
+ {0xc047,0x0c,0x15,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xf */
+ {0x487f,0x04,0x00,0x00,0x00,0x2f, 640, 400, 0x30, 0x55, 0x6e}, /* 0x10 */
+ {0xc06f,0x3c,0x01,0x06,0x13,0x31, 720, 480, 0x30, 0x00, 0x00}, /* 0x11 */
+ {0x006f,0x3d,0x6f,0x06,0x14,0x32, 720, 576, 0x30, 0x00, 0x00}, /* 0x12 (6f was 03) */
+ {0x0087,0x15,0x06,0x00,0x06,0x38,1024, 768, 0x30, 0x00, 0x00}, /* 0x13 */
+ {0xc877,0x16,0x0b,0x06,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x14 */
+ {0xc067,0x17,0x0f,0x49,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x15 */
+ {0x0067,0x18,0x11,0x00,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x16 */
+ {0x0047,0x19,0x16,0x8c,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x17 */
+ {0x0107,0x1a,0x1b,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x18 */
+ {0x0107,0x1b,0x1f,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x19 */
+ {0x407f,0x00,0x00,0x00,0x00,0x41, 320, 200, 0x30, 0x56, 0x4e}, /* 0x1a */
+ {0xc07f,0x01,0x00,0x04,0x04,0x50, 320, 240, 0x30, 0x00, 0x00}, /* 0x1b */
+ {0x007f,0x02,0x04,0x05,0x05,0x51, 400, 300, 0x30, 0x00, 0x00}, /* 0x1c */
+ {0xc077,0x03,0x0b,0x06,0x06,0x52, 512, 384, 0x30, 0x00, 0x00}, /* 0x1d */
+ {0x0077,0x32,0x40,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1e */
+ {0x0047,0x33,0x07,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1f */
+ {0x0047,0x34,0x0a,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x20 */
+ {0x0077,0x35,0x0b,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x21 */
+ {0x0047,0x36,0x11,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x22 */
+ {0x0047,0x37,0x16,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x23 */
+ {0x1137,0x38,0x19,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x24 */
+ {0x1107,0x39,0x1e,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x25 */
+ {0x1307,0x3a,0x20,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x26 */
+ {0x0077,0x42,0x5b,0x08,0x11,0x23,1280, 768, 0x30, 0x00, 0x00}, /* 0x27 */
+ {0x0087,0x45,0x57,0x00,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x28 38Hzi */
+ {0xc067,0x46,0x55,0x0b,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x29 848x480-60Hz */
+ {0x0087,0x47,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2a 856x480-38Hzi */
+ {0xc067,0x48,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2b 856x480-60Hz */
+ {0x006f,0x4d,0x71,0x06,0x15,0x5f, 768, 576, 0x30, 0x00, 0x00}, /* 0x2c 768x576-56Hz */
+ {0x0067,0x52,0x6a,0x00,0x1c,0x1d, 960, 540, 0x30, 0x00, 0x00}, /* 0x2d 960x540 60Hz */
+ {0x0077,0x53,0x6b,0x0b,0x1d,0x20, 960, 600, 0x30, 0x00, 0x00}, /* 0x2e 960x600 60Hz */
+ {0x0087,0x1c,0x11,0x00,0x07,0x3a,1280,1024, 0x30, 0x00, 0x00}, /* 0x2f */
+ {0x0137,0x1d,0x19,0x07,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x30 */
+ {0x0107,0x1e,0x1e,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x31 */
+ {0x0207,0x1f,0x20,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x32 */
+ {0x0127,0x54,0x6d,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x33 1152x864-60Hz */
+ {0x0127,0x44,0x19,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x34 1152x864-75Hz */
+ {0x0127,0x4a,0x1e,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x35 1152x864-85Hz */
+ {0xffff,0x00,0x00,0x00,0x00,0x00, 0, 0, 0, 0x00, 0x00}
+};
+
+static const struct SiS_CRT1Table SiSUSB_CRT1Table[] =
+{
+ {{0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+ 0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x00,
+ 0x00}}, /* 0x0 */
+ {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e,
+ 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00,
+ 0x00}}, /* 0x1 */
+ {{0x3d,0x31,0x31,0x81,0x37,0x1f,0x72,0xf0,
+ 0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x05,
+ 0x01}}, /* 0x2 */
+ {{0x4f,0x3f,0x3f,0x93,0x45,0x0d,0x24,0xf5,
+ 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x01,
+ 0x01}}, /* 0x3 */
+ {{0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x05,
+ 0x00}}, /* 0x4 */
+ {{0x5f,0x4f,0x4f,0x83,0x55,0x81,0x0b,0x3e,
+ 0xe9,0x8b,0xdf,0xe8,0x0c,0x00,0x00,0x05,
+ 0x00}}, /* 0x5 */
+ {{0x63,0x4f,0x4f,0x87,0x56,0x9b,0x06,0x3e,
+ 0xe8,0x8a,0xdf,0xe7,0x07,0x00,0x00,0x01,
+ 0x00}}, /* 0x6 */
+ {{0x64,0x4f,0x4f,0x88,0x55,0x9d,0xf2,0x1f,
+ 0xe0,0x83,0xdf,0xdf,0xf3,0x10,0x00,0x01,
+ 0x00}}, /* 0x7 */
+ {{0x63,0x4f,0x4f,0x87,0x5a,0x81,0xfb,0x1f,
+ 0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05,
+ 0x00}}, /* 0x8 */
+ {{0x65,0x4f,0x4f,0x89,0x58,0x80,0xfb,0x1f,
+ 0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05,
+ 0x61}}, /* 0x9 */
+ {{0x65,0x4f,0x4f,0x89,0x58,0x80,0x01,0x3e,
+ 0xe0,0x83,0xdf,0xdf,0x02,0x00,0x00,0x05,
+ 0x61}}, /* 0xa */
+ {{0x67,0x4f,0x4f,0x8b,0x58,0x81,0x0d,0x3e,
+ 0xe0,0x83,0xdf,0xdf,0x0e,0x00,0x00,0x05,
+ 0x61}}, /* 0xb */
+ {{0x65,0x4f,0x4f,0x89,0x57,0x9f,0xfb,0x1f,
+ 0xe6,0x8a,0xdf,0xdf,0xfc,0x10,0x00,0x01,
+ 0x00}}, /* 0xc */
+ {{0x7b,0x63,0x63,0x9f,0x6a,0x93,0x6f,0xf0,
+ 0x58,0x8a,0x57,0x57,0x70,0x20,0x00,0x05,
+ 0x01}}, /* 0xd */
+ {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xf0,
+ 0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x06,
+ 0x01}}, /* 0xe */
+ {{0x7d,0x63,0x63,0x81,0x6e,0x1d,0x98,0xf0,
+ 0x7c,0x82,0x57,0x57,0x99,0x00,0x00,0x06,
+ 0x01}}, /* 0xf */
+ {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xf0,
+ 0x58,0x8b,0x57,0x57,0x70,0x20,0x00,0x06,
+ 0x01}}, /* 0x10 */
+ {{0x7e,0x63,0x63,0x82,0x6b,0x13,0x75,0xf0,
+ 0x58,0x8b,0x57,0x57,0x76,0x20,0x00,0x06,
+ 0x01}}, /* 0x11 */
+ {{0x81,0x63,0x63,0x85,0x6d,0x18,0x7a,0xf0,
+ 0x58,0x8b,0x57,0x57,0x7b,0x20,0x00,0x06,
+ 0x61}}, /* 0x12 */
+ {{0x83,0x63,0x63,0x87,0x6e,0x19,0x81,0xf0,
+ 0x58,0x8b,0x57,0x57,0x82,0x20,0x00,0x06,
+ 0x61}}, /* 0x13 */
+ {{0x85,0x63,0x63,0x89,0x6f,0x1a,0x91,0xf0,
+ 0x58,0x8b,0x57,0x57,0x92,0x20,0x00,0x06,
+ 0x61}}, /* 0x14 */
+ {{0x99,0x7f,0x7f,0x9d,0x84,0x1a,0x96,0x1f,
+ 0x7f,0x83,0x7f,0x7f,0x97,0x10,0x00,0x02,
+ 0x00}}, /* 0x15 */
+ {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5,
+ 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
+ 0x01}}, /* 0x16 */
+ {{0xa1,0x7f,0x7f,0x85,0x86,0x97,0x24,0xf5,
+ 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
+ 0x01}}, /* 0x17 */
+ {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf5,
+ 0x00,0x83,0xff,0xff,0x1f,0x10,0x00,0x02,
+ 0x01}}, /* 0x18 */
+ {{0xa7,0x7f,0x7f,0x8b,0x89,0x95,0x26,0xf5,
+ 0x00,0x83,0xff,0xff,0x27,0x10,0x00,0x02,
+ 0x01}}, /* 0x19 */
+ {{0xa9,0x7f,0x7f,0x8d,0x8c,0x9a,0x2c,0xf5,
+ 0x00,0x83,0xff,0xff,0x2d,0x14,0x00,0x02,
+ 0x62}}, /* 0x1a */
+ {{0xab,0x7f,0x7f,0x8f,0x8d,0x9b,0x35,0xf5,
+ 0x00,0x83,0xff,0xff,0x36,0x14,0x00,0x02,
+ 0x62}}, /* 0x1b */
+ {{0xcf,0x9f,0x9f,0x93,0xb2,0x01,0x14,0xba,
+ 0x00,0x83,0xff,0xff,0x15,0x00,0x00,0x03,
+ 0x00}}, /* 0x1c */
+ {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0x5a,
+ 0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07,
+ 0x01}}, /* 0x1d */
+ {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0x5a,
+ 0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07,
+ 0x01}}, /* 0x1e */
+ {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0x5a,
+ 0x00,0x83,0xff,0xff,0x2f,0x09,0x00,0x07,
+ 0x01}}, /* 0x1f */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x20 */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x21 */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x22 */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x23 */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x24 */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x25 */
+ {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
+ 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
+ 0x00}}, /* 0x26 */
+ {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
+ 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
+ 0x00}}, /* 0x27 */
+ {{0x43,0xef,0xef,0x87,0x06,0x00,0xd4,0x1f,
+ 0xa0,0x83,0x9f,0x9f,0xd5,0x1f,0x41,0x05,
+ 0x63}}, /* 0x28 */
+ {{0x45,0xef,0xef,0x89,0x07,0x01,0xd9,0x1f,
+ 0xa0,0x83,0x9f,0x9f,0xda,0x1f,0x41,0x05,
+ 0x63}}, /* 0x29 */
+ {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
+ 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
+ 0x00}}, /* 0x2a */
+ {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
+ 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
+ 0x00}}, /* 0x2b */
+ {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
+ 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
+ 0x00}}, /* 0x2c */
+ {{0x59,0xff,0xff,0x9d,0x17,0x13,0x33,0xba,
+ 0x00,0x83,0xff,0xff,0x34,0x0f,0x41,0x05,
+ 0x44}}, /* 0x2d */
+ {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x38,0xba,
+ 0x00,0x83,0xff,0xff,0x39,0x0f,0x41,0x05,
+ 0x44}}, /* 0x2e */
+ {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x3d,0xba,
+ 0x00,0x83,0xff,0xff,0x3e,0x0f,0x41,0x05,
+ 0x44}}, /* 0x2f */
+ {{0x5d,0xff,0xff,0x81,0x19,0x95,0x41,0xba,
+ 0x00,0x84,0xff,0xff,0x42,0x0f,0x41,0x05,
+ 0x44}}, /* 0x30 */
+ {{0x55,0xff,0xff,0x99,0x0d,0x0c,0x3e,0xba,
+ 0x00,0x84,0xff,0xff,0x3f,0x0f,0x41,0x05,
+ 0x00}}, /* 0x31 */
+ {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xba,
+ 0x27,0x8b,0xdf,0xdf,0x73,0x00,0x00,0x06,
+ 0x01}}, /* 0x32 */
+ {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xba,
+ 0x26,0x89,0xdf,0xdf,0x6f,0x00,0x00,0x06,
+ 0x01}}, /* 0x33 */
+ {{0x7f,0x63,0x63,0x82,0x6b,0x13,0x75,0xba,
+ 0x29,0x8c,0xdf,0xdf,0x75,0x00,0x00,0x06,
+ 0x01}}, /* 0x34 */
+ {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf1,
+ 0xaf,0x85,0x3f,0x3f,0x25,0x30,0x00,0x02,
+ 0x01}}, /* 0x35 */
+ {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf1,
+ 0xad,0x81,0x3f,0x3f,0x1f,0x30,0x00,0x02,
+ 0x01}}, /* 0x36 */
+ {{0xa7,0x7f,0x7f,0x88,0x89,0x95,0x26,0xf1,
+ 0xb1,0x85,0x3f,0x3f,0x27,0x30,0x00,0x02,
+ 0x01}}, /* 0x37 */
+ {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0xc4,
+ 0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07,
+ 0x01}}, /* 0x38 */
+ {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0xd4,
+ 0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07,
+ 0x01}}, /* 0x39 */
+ {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0xd4,
+ 0x7d,0x81,0xcf,0xcf,0x2f,0x21,0x00,0x07,
+ 0x01}}, /* 0x3a */
+ {{0xdc,0x9f,0x9f,0x80,0xaf,0x9d,0xe6,0xff,
+ 0xc0,0x83,0xbf,0xbf,0xe7,0x10,0x00,0x07,
+ 0x01}}, /* 0x3b */
+ {{0x6b,0x59,0x59,0x8f,0x5e,0x8c,0x0b,0x3e,
+ 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x05,
+ 0x00}}, /* 0x3c */
+ {{0x6d,0x59,0x59,0x91,0x60,0x89,0x53,0xf0,
+ 0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05,
+ 0x41}}, /* 0x3d */
+ {{0x86,0x6a,0x6a,0x8a,0x74,0x06,0x8c,0x15,
+ 0x4f,0x83,0xef,0xef,0x8d,0x30,0x00,0x02,
+ 0x00}}, /* 0x3e */
+ {{0x81,0x6a,0x6a,0x85,0x70,0x00,0x0f,0x3e,
+ 0xeb,0x8e,0xdf,0xdf,0x10,0x00,0x00,0x02,
+ 0x00}}, /* 0x3f */
+ {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x1e,0xf1,
+ 0xae,0x85,0x57,0x57,0x1f,0x30,0x00,0x02,
+ 0x01}}, /* 0x40 */
+ {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5,
+ 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
+ 0x01}}, /* 0x41 */
+ {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x20,0xf5,
+ 0x03,0x88,0xff,0xff,0x21,0x10,0x00,0x07,
+ 0x01}}, /* 0x42 */
+ {{0xe6,0xae,0xae,0x8a,0xbd,0x90,0x3d,0x10,
+ 0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x00,0x03,
+ 0x00}}, /* 0x43 */
+ {{0xc3,0x8f,0x8f,0x87,0x9b,0x0b,0x82,0xef,
+ 0x60,0x83,0x5f,0x5f,0x83,0x10,0x00,0x07,
+ 0x01}}, /* 0x44 */
+ {{0x86,0x69,0x69,0x8A,0x74,0x06,0x8C,0x15,
+ 0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02,
+ 0x00}}, /* 0x45 */
+ {{0x83,0x69,0x69,0x87,0x6f,0x1d,0x03,0x3E,
+ 0xE5,0x8d,0xDF,0xe4,0x04,0x00,0x00,0x06,
+ 0x00}}, /* 0x46 */
+ {{0x86,0x6A,0x6A,0x8A,0x74,0x06,0x8C,0x15,
+ 0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02,
+ 0x00}}, /* 0x47 */
+ {{0x81,0x6A,0x6A,0x85,0x70,0x00,0x0F,0x3E,
+ 0xEB,0x8E,0xDF,0xDF,0x10,0x00,0x00,0x02,
+ 0x00}}, /* 0x48 */
+ {{0xdd,0xa9,0xa9,0x81,0xb4,0x97,0x26,0xfd,
+ 0x01,0x8d,0xff,0x00,0x27,0x10,0x00,0x03,
+ 0x01}}, /* 0x49 */
+ {{0xd9,0x8f,0x8f,0x9d,0xba,0x0a,0x8a,0xff,
+ 0x60,0x8b,0x5f,0x5f,0x8b,0x10,0x00,0x03,
+ 0x01}}, /* 0x4a */
+ {{0xea,0xae,0xae,0x8e,0xba,0x82,0x40,0x10,
+ 0x1b,0x87,0x19,0x1a,0x41,0x0f,0x00,0x03,
+ 0x00}}, /* 0x4b */
+ {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0xf1,0xff,
+ 0xc0,0x83,0xbf,0xbf,0xf2,0x10,0x00,0x07,
+ 0x01}}, /* 0x4c */
+ {{0x75,0x5f,0x5f,0x99,0x66,0x90,0x53,0xf0,
+ 0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05,
+ 0x41}},
+ {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e,
+ 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00,
+ 0x00}}, /* 0x4e */
+ {{0xcd,0x9f,0x9f,0x91,0xab,0x1c,0x3a,0xff,
+ 0x20,0x83,0x1f,0x1f,0x3b,0x10,0x00,0x07,
+ 0x21}}, /* 0x4f */
+ {{0x15,0xd1,0xd1,0x99,0xe2,0x19,0x3d,0x10,
+ 0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x01,0x0c,
+ 0x20}}, /* 0x50 */
+ {{0x0e,0xef,0xef,0x92,0xfe,0x03,0x30,0xf0,
+ 0x1e,0x83,0x1b,0x1c,0x31,0x00,0x01,0x00,
+ 0x61}}, /* 0x51 */
+ {{0x85,0x77,0x77,0x89,0x7d,0x01,0x31,0xf0,
+ 0x1e,0x84,0x1b,0x1c,0x32,0x00,0x00,0x02,
+ 0x41}}, /* 0x52 */
+ {{0x87,0x77,0x77,0x8b,0x81,0x0b,0x68,0xf0,
+ 0x5a,0x80,0x57,0x57,0x69,0x00,0x00,0x02,
+ 0x01}}, /* 0x53 */
+ {{0xcd,0x8f,0x8f,0x91,0x9b,0x1b,0x7a,0xff,
+ 0x64,0x8c,0x5f,0x62,0x7b,0x10,0x00,0x07,
+ 0x41}} /* 0x54 */
+};
+
+static struct SiS_VCLKData SiSUSB_VCLKData[] =
+{
+ { 0x1b,0xe1, 25}, /* 0x00 */
+ { 0x4e,0xe4, 28}, /* 0x01 */
+ { 0x57,0xe4, 31}, /* 0x02 */
+ { 0xc3,0xc8, 36}, /* 0x03 */
+ { 0x42,0xe2, 40}, /* 0x04 */
+ { 0xfe,0xcd, 43}, /* 0x05 */
+ { 0x5d,0xc4, 44}, /* 0x06 */
+ { 0x52,0xe2, 49}, /* 0x07 */
+ { 0x53,0xe2, 50}, /* 0x08 */
+ { 0x74,0x67, 52}, /* 0x09 */
+ { 0x6d,0x66, 56}, /* 0x0a */
+ { 0x5a,0x64, 65}, /* 0x0b */
+ { 0x46,0x44, 67}, /* 0x0c */
+ { 0xb1,0x46, 68}, /* 0x0d */
+ { 0xd3,0x4a, 72}, /* 0x0e */
+ { 0x29,0x61, 75}, /* 0x0f */
+ { 0x6e,0x46, 76}, /* 0x10 */
+ { 0x2b,0x61, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x41,104}, /* 0x17 */
+ { 0x3a,0x23,105}, /* 0x18 */
+ { 0x70,0x44,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0x54,0x42,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x62,0x06,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a 301 TV */
+ { 0x52,0x6a, 27}, /* 0x3b 301 TV */
+ { 0x62,0x24, 70}, /* 0x3c 301 TV */
+ { 0x62,0x64, 70}, /* 0x3d 301 TV */
+ { 0xa8,0x4c, 30}, /* 0x3e 301 TV */
+ { 0x20,0x26, 33}, /* 0x3f 301 TV */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x60,0x36, 30}, /* 0x41 Chrontel */
+ { 0x40,0x4a, 28}, /* 0x42 Chrontel */
+ { 0x9f,0x46, 44}, /* 0x43 Chrontel */
+ { 0x97,0x2c, 26}, /* 0x44 */
+ { 0x44,0xe4, 25}, /* 0x45 Chrontel */
+ { 0x7e,0x32, 47}, /* 0x46 Chrontel */
+ { 0x8a,0x24, 31}, /* 0x47 Chrontel */
+ { 0x97,0x2c, 26}, /* 0x48 Chrontel */
+ { 0xce,0x3c, 39}, /* 0x49 */
+ { 0x52,0x4a, 36}, /* 0x4a Chrontel */
+ { 0x34,0x61, 95}, /* 0x4b */
+ { 0x78,0x27,108}, /* 0x4c - was 102 */
+ { 0x66,0x43,123}, /* 0x4d Modes 0x26-0x28 (1400x1050) */
+ { 0x41,0x4e, 21}, /* 0x4e */
+ { 0xa1,0x4a, 29}, /* 0x4f Chrontel */
+ { 0x19,0x42, 42}, /* 0x50 */
+ { 0x54,0x46, 58}, /* 0x51 Chrontel */
+ { 0x25,0x42, 61}, /* 0x52 */
+ { 0x44,0x44, 66}, /* 0x53 Chrontel */
+ { 0x3a,0x62, 70}, /* 0x54 Chrontel */
+ { 0x62,0xc6, 34}, /* 0x55 848x480-60 */
+ { 0x6a,0xc6, 37}, /* 0x56 848x480-75 - TEMP */
+ { 0xbf,0xc8, 35}, /* 0x57 856x480-38i,60 */
+ { 0x30,0x23, 88}, /* 0x58 1360x768-62 (is 60Hz!) */
+ { 0x52,0x07,149}, /* 0x59 1280x960-85 */
+ { 0x56,0x07,156}, /* 0x5a 1400x1050-75 */
+ { 0x70,0x29, 81}, /* 0x5b 1280x768 LCD */
+ { 0x45,0x25, 83}, /* 0x5c 1280x800 */
+ { 0x70,0x0a,147}, /* 0x5d 1680x1050 */
+ { 0x70,0x24,162}, /* 0x5e 1600x1200 */
+ { 0x5a,0x64, 65}, /* 0x5f 1280x720 - temp */
+ { 0x63,0x46, 68}, /* 0x60 1280x768_2 */
+ { 0x31,0x42, 79}, /* 0x61 1280x768_3 - temp */
+ { 0, 0, 0}, /* 0x62 - custom (will be filled out at run-time) */
+ { 0x5a,0x64, 65}, /* 0x63 1280x720 (LCD LVDS) */
+ { 0x70,0x28, 90}, /* 0x64 1152x864@60 */
+ { 0x41,0xc4, 32}, /* 0x65 848x480@60 */
+ { 0x5c,0xc6, 32}, /* 0x66 856x480@60 */
+ { 0x76,0xe7, 27}, /* 0x67 720x480@60 */
+ { 0x5f,0xc6, 33}, /* 0x68 720/768x576@60 */
+ { 0x52,0x27, 75}, /* 0x69 1920x1080i 60Hz interlaced */
+ { 0x7c,0x6b, 38}, /* 0x6a 960x540@60 */
+ { 0xe3,0x56, 41}, /* 0x6b 960x600@60 */
+ { 0x45,0x25, 83}, /* 0x6c 1280x800 */
+ { 0x70,0x28, 90}, /* 0x6d 1152x864@60 */
+ { 0x15,0xe1, 20}, /* 0x6e 640x400@60 (fake, not actually used) */
+ { 0x5f,0xc6, 33}, /* 0x6f 720x576@60 */
+ { 0x37,0x5a, 10}, /* 0x70 320x200@60 (fake, not actually used) */
+ { 0x2b,0xc2, 35} /* 0x71 768@576@60 */
+};
+
+void SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr);
+unsigned short SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth);
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
+
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+ u8 index, u8 data);
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+ u8 index, u8 *data);
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+ u8 idx, u8 myand, u8 myor);
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+ u8 index, u8 myor);
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+ u8 idx, u8 myand);
+
+#endif
+
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
new file mode 100644
index 0000000..94edd47
--- /dev/null
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -0,0 +1,169 @@
+/*
+ * General structure definitions for universal mode switching modules
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, the following license terms
+ * apply:
+ *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of the GNU General Public License as published by
+ * * the Free Software Foundation; either version 2 of the named License,
+ * * or any later version.
+ * *
+ * * This program is distributed in the hope that it will be useful,
+ * * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * * GNU General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * * notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * * notice, this list of conditions and the following disclaimer in the
+ * * documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * * derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _SISUSB_STRUCT_H_
+#define _SISUSB_STRUCT_H_
+
+struct SiS_St {
+ unsigned char St_ModeID;
+ unsigned short St_ModeFlag;
+ unsigned char St_StTableIndex;
+ unsigned char St_CRT2CRTC;
+ unsigned char St_ResInfo;
+ unsigned char VB_StTVFlickerIndex;
+ unsigned char VB_StTVEdgeIndex;
+ unsigned char VB_StTVYFilterIndex;
+ unsigned char St_PDC;
+};
+
+struct SiS_StandTable
+{
+ unsigned char CRT_COLS;
+ unsigned char ROWS;
+ unsigned char CHAR_HEIGHT;
+ unsigned short CRT_LEN;
+ unsigned char SR[4];
+ unsigned char MISC;
+ unsigned char CRTC[0x19];
+ unsigned char ATTR[0x14];
+ unsigned char GRC[9];
+};
+
+struct SiS_StResInfo_S {
+ unsigned short HTotal;
+ unsigned short VTotal;
+};
+
+struct SiS_Ext
+{
+ unsigned char Ext_ModeID;
+ unsigned short Ext_ModeFlag;
+ unsigned short Ext_VESAID;
+ unsigned char Ext_RESINFO;
+ unsigned char VB_ExtTVFlickerIndex;
+ unsigned char VB_ExtTVEdgeIndex;
+ unsigned char VB_ExtTVYFilterIndex;
+ unsigned char VB_ExtTVYFilterIndexROM661;
+ unsigned char REFindex;
+ char ROMMODEIDX661;
+};
+
+struct SiS_Ext2
+{
+ unsigned short Ext_InfoFlag;
+ unsigned char Ext_CRT1CRTC;
+ unsigned char Ext_CRTVCLK;
+ unsigned char Ext_CRT2CRTC;
+ unsigned char Ext_CRT2CRTC_NS;
+ unsigned char ModeID;
+ unsigned short XRes;
+ unsigned short YRes;
+ unsigned char Ext_PDC;
+ unsigned char Ext_FakeCRT2CRTC;
+ unsigned char Ext_FakeCRT2Clk;
+};
+
+struct SiS_CRT1Table
+{
+ unsigned char CR[17];
+};
+
+struct SiS_VCLKData
+{
+ unsigned char SR2B,SR2C;
+ unsigned short CLOCK;
+};
+
+struct SiS_ModeResInfo
+{
+ unsigned short HTotal;
+ unsigned short VTotal;
+ unsigned char XChar;
+ unsigned char YChar;
+};
+
+struct SiS_Private
+{
+ void *sisusb;
+
+ unsigned long IOAddress;
+
+ unsigned long SiS_P3c4;
+ unsigned long SiS_P3d4;
+ unsigned long SiS_P3c0;
+ unsigned long SiS_P3ce;
+ unsigned long SiS_P3c2;
+ unsigned long SiS_P3ca;
+ unsigned long SiS_P3c6;
+ unsigned long SiS_P3c7;
+ unsigned long SiS_P3c8;
+ unsigned long SiS_P3c9;
+ unsigned long SiS_P3cb;
+ unsigned long SiS_P3cc;
+ unsigned long SiS_P3cd;
+ unsigned long SiS_P3da;
+ unsigned long SiS_Part1Port;
+
+ unsigned char SiS_MyCR63;
+ unsigned short SiS_CRT1Mode;
+ unsigned short SiS_ModeType;
+ unsigned short SiS_SetFlag;
+
+ const struct SiS_StandTable *SiS_StandTable;
+ const struct SiS_St *SiS_SModeIDTable;
+ const struct SiS_Ext *SiS_EModeIDTable;
+ const struct SiS_Ext2 *SiS_RefIndex;
+ const struct SiS_CRT1Table *SiS_CRT1Table;
+ struct SiS_VCLKData *SiS_VCLKData;
+ const struct SiS_ModeResInfo *SiS_ModeResInfo;
+};
+
+#endif
+
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index faa7443..03fb70e 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -3,8 +3,8 @@
/*
* uss720.c -- USS720 USB Parport Cable.
*
- * Copyright (C) 1999
- * Thomas Sailer (sailer@ife.ee.ethz.ch)
+ * Copyright (C) 1999, 2005
+ * Thomas Sailer (t.sailer@alumni.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,99 +23,236 @@
* Based on parport_pc.c
*
* History:
- * 0.1 04.08.99 Created
- * 0.2 07.08.99 Some fixes mainly suggested by Tim Waugh
- * Interrupt handling currently disabled because
- * usb_request_irq crashes somewhere within ohci.c
- * for no apparent reason (that is for me, anyway)
- * ECP currently untested
- * 0.3 10.08.99 fixing merge errors
- * 0.4 13.08.99 Added Vendor/Product ID of Brad Hard's cable
- * 0.5 20.09.99 usb_control_msg wrapper used
- * Nov01.00 usb_device_table support by Adam J. Richter
- * 08.04.01 Identify version on module load. gb
+ * 0.1 04.08.1999 Created
+ * 0.2 07.08.1999 Some fixes mainly suggested by Tim Waugh
+ * Interrupt handling currently disabled because
+ * usb_request_irq crashes somewhere within ohci.c
+ * for no apparent reason (that is for me, anyway)
+ * ECP currently untested
+ * 0.3 10.08.1999 fixing merge errors
+ * 0.4 13.08.1999 Added Vendor/Product ID of Brad Hard's cable
+ * 0.5 20.09.1999 usb_control_msg wrapper used
+ * Nov01.2000 usb_device_table support by Adam J. Richter
+ * 08.04.2001 Identify version on module load. gb
+ * 0.6 02.09.2005 Fix "scheduling in interrupt" problem by making save/restore
+ * context asynchronous
*
*/
/*****************************************************************************/
+#define DEBUG
+
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/parport.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/kref.h>
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.5"
-#define DRIVER_AUTHOR "Thomas M. Sailer, sailer@ife.ee.ethz.ch"
+#define DRIVER_VERSION "v0.6"
+#define DRIVER_AUTHOR "Thomas M. Sailer, t.sailer@alumni.ethz.ch"
#define DRIVER_DESC "USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip"
/* --------------------------------------------------------------------- */
struct parport_uss720_private {
struct usb_device *usbdev;
- void *irqhandle;
- unsigned int irqpipe;
- unsigned char reg[7]; /* USB registers */
+ struct parport *pp;
+ struct kref ref_count;
+ __u8 reg[7]; /* USB registers */
+ struct list_head asynclist;
+ spinlock_t asynclock;
+};
+
+struct uss720_async_request {
+ struct parport_uss720_private *priv;
+ struct kref ref_count;
+ struct list_head asynclist;
+ struct completion compl;
+ struct urb *urb;
+ struct usb_ctrlrequest dr;
+ __u8 reg[7];
};
/* --------------------------------------------------------------------- */
-static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val)
+static void destroy_priv(struct kref *kref)
{
- struct parport_uss720_private *priv = pp->private_data;
- struct usb_device *usbdev = priv->usbdev;
+ struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count);
+
+ usb_put_dev(priv->usbdev);
+ kfree(priv);
+ dbg("destroying priv datastructure");
+}
+
+static void destroy_async(struct kref *kref)
+{
+ struct uss720_async_request *rq = container_of(kref, struct uss720_async_request, ref_count);
+ struct parport_uss720_private *priv = rq->priv;
+ unsigned long flags;
+
+ if (likely(rq->urb))
+ usb_free_urb(rq->urb);
+ spin_lock_irqsave(&priv->asynclock, flags);
+ list_del_init(&rq->asynclist);
+ spin_unlock_irqrestore(&priv->asynclock, flags);
+ kfree(rq);
+ kref_put(&priv->ref_count, destroy_priv);
+}
+
+/* --------------------------------------------------------------------- */
+
+static void async_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+ struct uss720_async_request *rq;
+ struct parport *pp;
+ struct parport_uss720_private *priv;
+
+ rq = urb->context;
+ priv = rq->priv;
+ pp = priv->pp;
+ if (urb->status) {
+ err("async_complete: urb error %d", urb->status);
+ } else if (rq->dr.bRequest == 3) {
+ memcpy(priv->reg, rq->reg, sizeof(priv->reg));
+#if 0
+ dbg("async_complete regs %02x %02x %02x %02x %02x %02x %02x",
+ (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], (unsigned int)priv->reg[2],
+ (unsigned int)priv->reg[3], (unsigned int)priv->reg[4], (unsigned int)priv->reg[5],
+ (unsigned int)priv->reg[6]);
+#endif
+ /* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
+ if (rq->reg[2] & rq->reg[1] & 0x10 && pp)
+ parport_generic_irq(0, pp, NULL);
+ }
+ complete(&rq->compl);
+ kref_put(&rq->ref_count, destroy_async);
+}
+
+static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv,
+ __u8 request, __u8 requesttype, __u16 value, __u16 index,
+ unsigned int mem_flags)
+{
+ struct usb_device *usbdev;
+ struct uss720_async_request *rq;
+ unsigned long flags;
+ int ret;
+
+ if (!priv)
+ return NULL;
+ usbdev = priv->usbdev;
+ if (!usbdev)
+ return NULL;
+ rq = kmalloc(sizeof(struct uss720_async_request), mem_flags);
+ if (!rq) {
+ err("submit_async_request out of memory");
+ return NULL;
+ }
+ kref_init(&rq->ref_count);
+ INIT_LIST_HEAD(&rq->asynclist);
+ init_completion(&rq->compl);
+ kref_get(&priv->ref_count);
+ rq->priv = priv;
+ rq->urb = usb_alloc_urb(0, mem_flags);
+ if (!rq->urb) {
+ kref_put(&rq->ref_count, destroy_async);
+ err("submit_async_request out of memory");
+ return NULL;
+ }
+ rq->dr.bRequestType = requesttype;
+ rq->dr.bRequest = request;
+ rq->dr.wValue = cpu_to_le16(value);
+ rq->dr.wIndex = cpu_to_le16(index);
+ rq->dr.wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0);
+ usb_fill_control_urb(rq->urb, usbdev, (requesttype & 0x80) ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0),
+ (unsigned char *)&rq->dr,
+ (request == 3) ? rq->reg : NULL, (request == 3) ? sizeof(rq->reg) : 0, async_complete, rq);
+ /* rq->urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ spin_lock_irqsave(&priv->asynclock, flags);
+ list_add_tail(&rq->asynclist, &priv->asynclist);
+ spin_unlock_irqrestore(&priv->asynclock, flags);
+ ret = usb_submit_urb(rq->urb, mem_flags);
+ if (!ret) {
+ kref_get(&rq->ref_count);
+ return rq;
+ }
+ kref_put(&rq->ref_count, destroy_async);
+ err("submit_async_request submit_urb failed with %d", ret);
+ return NULL;
+}
+
+static unsigned int kill_all_async_requests_priv(struct parport_uss720_private *priv)
+{
+ struct uss720_async_request *rq;
+ unsigned long flags;
+ unsigned int ret = 0;
+
+ spin_lock_irqsave(&priv->asynclock, flags);
+ list_for_each_entry(rq, &priv->asynclist, asynclist) {
+ usb_unlink_urb(rq->urb);
+ ret++;
+ }
+ spin_unlock_irqrestore(&priv->asynclock, flags);
+ return ret;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, unsigned int mem_flags)
+{
+ struct parport_uss720_private *priv;
+ struct uss720_async_request *rq;
static const unsigned char regindex[9] = {
4, 0, 1, 5, 5, 0, 2, 3, 6
};
int ret;
- if (!usbdev)
- return -1;
- ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev,0), 3, 0xc0, ((unsigned int)reg) << 8, 0, priv->reg, 7, 1000);
- if (ret != 7) {
- printk(KERN_DEBUG "uss720: get_1284_register(%d) failed, status 0x%x expected 7\n",
- (unsigned int)reg, ret);
- ret = -1;
- } else {
-#if 0
- printk(KERN_DEBUG "uss720: get_1284_register(%d) return %02x %02x %02x %02x %02x %02x %02x\n",
- (unsigned int)reg, (unsigned int)priv->reg[0], (unsigned int)priv->reg[1],
- (unsigned int)priv->reg[2], (unsigned int)priv->reg[3], (unsigned int)priv->reg[4],
- (unsigned int)priv->reg[5], (unsigned int)priv->reg[6]);
-#endif
- /* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
- if (priv->reg[2] & priv->reg[1] & 0x10)
- parport_generic_irq(0, pp, NULL);
- ret = 0;
+ if (!pp)
+ return -EIO;
+ priv = pp->private_data;
+ rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags);
+ if (!rq) {
+ err("get_1284_register(%u) failed", (unsigned int)reg);
+ return -EIO;
}
- if (val)
+ if (!val) {
+ kref_put(&rq->ref_count, destroy_async);
+ return 0;
+ }
+ if (wait_for_completion_timeout(&rq->compl, HZ)) {
+ ret = rq->urb->status;
*val = priv->reg[(reg >= 9) ? 0 : regindex[reg]];
- return ret;
+ if (ret)
+ warn("get_1284_register: usb error %d", ret);
+ kref_put(&rq->ref_count, destroy_async);
+ return ret;
+ }
+ warn("get_1284_register timeout");
+ kill_all_async_requests_priv(priv);
+ return -EIO;
}
-static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val)
+static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, unsigned int mem_flags)
{
- struct parport_uss720_private *priv = pp->private_data;
- struct usb_device *usbdev = priv->usbdev;
- int ret;
+ struct parport_uss720_private *priv;
+ struct uss720_async_request *rq;
- if (!usbdev)
- return -1;
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev,0), 4, 0x40, (((unsigned int)reg) << 8) | val, 0, NULL, 0, 1000);
- if (ret) {
- printk(KERN_DEBUG "uss720: set_1284_register(%u,0x%02x) failed, status 0x%x\n",
- (unsigned int)reg, (unsigned int)val, ret);
- } else {
-#if 0
- printk(KERN_DEBUG "uss720: set_1284_register(%u,0x%02x)\n",
- (unsigned int)reg, (unsigned int)val);
-#endif
+ if (!pp)
+ return -EIO;
+ priv = pp->private_data;
+ rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags);
+ if (!rq) {
+ err("set_1284_register(%u,%u) failed", (unsigned int)reg, (unsigned int)val);
+ return -EIO;
}
- return ret;
+ kref_put(&rq->ref_count, destroy_async);
+ return 0;
}
/* --------------------------------------------------------------------- */
@@ -132,8 +269,9 @@
{
struct parport_uss720_private *priv = pp->private_data;
int mode;
+ __u8 reg;
- if (get_1284_register(pp, 6, NULL))
+ if (get_1284_register(pp, 6, ®, GFP_KERNEL))
return -EIO;
/* Bits <7:5> contain the mode. */
mode = (priv->reg[2] >> 5) & 0x7;
@@ -153,7 +291,7 @@
case ECR_ECP: /* ECP Parallel Port mode */
/* Poll slowly. */
for (;;) {
- if (get_1284_register(pp, 6, NULL))
+ if (get_1284_register(pp, 6, ®, GFP_KERNEL))
return -EIO;
if (priv->reg[2] & 0x01)
break;
@@ -167,7 +305,9 @@
}
}
/* Set the mode. */
- if (set_1284_register(pp, 6, m << 5))
+ if (set_1284_register(pp, 6, m << 5, GFP_KERNEL))
+ return -EIO;
+ if (get_1284_register(pp, 6, ®, GFP_KERNEL))
return -EIO;
return 0;
}
@@ -179,7 +319,7 @@
{
unsigned char stat;
- if (get_1284_register(pp, 1, &stat))
+ if (get_1284_register(pp, 1, &stat, GFP_KERNEL))
return 1;
return stat & 1;
}
@@ -205,14 +345,14 @@
static void parport_uss720_write_data(struct parport *pp, unsigned char d)
{
- set_1284_register(pp, 0, d);
+ set_1284_register(pp, 0, d, GFP_KERNEL);
}
static unsigned char parport_uss720_read_data(struct parport *pp)
{
unsigned char ret;
- if (get_1284_register(pp, 0, &ret))
+ if (get_1284_register(pp, 0, &ret, GFP_KERNEL))
return 0;
return ret;
}
@@ -222,7 +362,7 @@
struct parport_uss720_private *priv = pp->private_data;
d = (d & 0xf) | (priv->reg[1] & 0xf0);
- if (set_1284_register(pp, 2, d))
+ if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
@@ -241,7 +381,7 @@
mask &= 0x0f;
val &= 0x0f;
d = (priv->reg[1] & (~mask)) ^ val;
- if (set_1284_register(pp, 2, d))
+ if (set_1284_register(pp, 2, d, GFP_KERNEL))
return 0;
priv->reg[1] = d;
return d & 0xf;
@@ -251,7 +391,7 @@
{
unsigned char ret;
- if (get_1284_register(pp, 1, &ret))
+ if (get_1284_register(pp, 1, &ret, GFP_KERNEL))
return 0;
return ret & 0xf8;
}
@@ -262,7 +402,7 @@
unsigned char d;
d = priv->reg[1] & ~0x10;
- if (set_1284_register(pp, 2, d))
+ if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
@@ -273,7 +413,7 @@
unsigned char d;
d = priv->reg[1] | 0x10;
- if (set_1284_register(pp, 2, d))
+ if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
@@ -284,7 +424,7 @@
unsigned char d;
d = priv->reg[1] & ~0x20;
- if (set_1284_register(pp, 2, d))
+ if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
@@ -295,7 +435,7 @@
unsigned char d;
d = priv->reg[1] | 0x20;
- if (set_1284_register(pp, 2, d))
+ if (set_1284_register(pp, 2, d, GFP_KERNEL))
return;
priv->reg[1] = d;
}
@@ -310,17 +450,23 @@
{
struct parport_uss720_private *priv = pp->private_data;
- if (get_1284_register(pp, 2, NULL))
+#if 0
+ if (get_1284_register(pp, 2, NULL, GFP_ATOMIC))
return;
+#endif
s->u.pc.ctr = priv->reg[1];
s->u.pc.ecr = priv->reg[2];
}
static void parport_uss720_restore_state(struct parport *pp, struct parport_state *s)
{
- set_1284_register(pp, 2, s->u.pc.ctr);
- set_1284_register(pp, 6, s->u.pc.ecr);
- get_1284_register(pp, 2, NULL);
+ struct parport_uss720_private *priv = pp->private_data;
+
+ set_1284_register(pp, 2, s->u.pc.ctr, GFP_ATOMIC);
+ set_1284_register(pp, 6, s->u.pc.ecr, GFP_ATOMIC);
+ get_1284_register(pp, 2, NULL, GFP_ATOMIC);
+ priv->reg[1] = s->u.pc.ctr;
+ priv->reg[2] = s->u.pc.ecr;
}
static size_t parport_uss720_epp_read_data(struct parport *pp, void *buf, size_t length, int flags)
@@ -331,7 +477,7 @@
if (change_mode(pp, ECR_EPP))
return 0;
for (; got < length; got++) {
- if (get_1284_register(pp, 4, (char *)buf))
+ if (get_1284_register(pp, 4, (char *)buf, GFP_KERNEL))
break;
buf++;
if (priv->reg[0] & 0x01) {
@@ -352,10 +498,10 @@
if (change_mode(pp, ECR_EPP))
return 0;
for (; written < length; written++) {
- if (set_1284_register(pp, 4, (char *)buf))
+ if (set_1284_register(pp, 4, (char *)buf, GFP_KERNEL))
break;
((char*)buf)++;
- if (get_1284_register(pp, 1, NULL))
+ if (get_1284_register(pp, 1, NULL, GFP_KERNEL))
break;
if (priv->reg[0] & 0x01) {
clear_epp_timeout(pp);
@@ -390,7 +536,7 @@
if (change_mode(pp, ECR_EPP))
return 0;
for (; got < length; got++) {
- if (get_1284_register(pp, 3, (char *)buf))
+ if (get_1284_register(pp, 3, (char *)buf, GFP_KERNEL))
break;
buf++;
if (priv->reg[0] & 0x01) {
@@ -410,10 +556,10 @@
if (change_mode(pp, ECR_EPP))
return 0;
for (; written < length; written++) {
- if (set_1284_register(pp, 3, *(char *)buf))
+ if (set_1284_register(pp, 3, *(char *)buf, GFP_KERNEL))
break;
buf++;
- if (get_1284_register(pp, 1, NULL))
+ if (get_1284_register(pp, 1, NULL, GFP_KERNEL))
break;
if (priv->reg[0] & 0x01) {
clear_epp_timeout(pp);
@@ -467,7 +613,7 @@
if (change_mode(pp, ECR_ECP))
return 0;
for (; written < len; written++) {
- if (set_1284_register(pp, 5, *(char *)buffer))
+ if (set_1284_register(pp, 5, *(char *)buffer, GFP_KERNEL))
break;
buffer++;
}
@@ -536,93 +682,91 @@
static int uss720_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_device *usbdev = usb_get_dev(interface_to_usbdev(intf));
struct usb_host_interface *interface;
struct usb_host_endpoint *endpoint;
struct parport_uss720_private *priv;
struct parport *pp;
+ unsigned char reg;
int i;
- printk(KERN_DEBUG "uss720: probe: vendor id 0x%x, device id 0x%x\n",
- le16_to_cpu(usbdev->descriptor.idVendor),
- le16_to_cpu(usbdev->descriptor.idProduct));
+ dbg("probe: vendor id 0x%x, device id 0x%x\n",
+ le16_to_cpu(usbdev->descriptor.idVendor),
+ le16_to_cpu(usbdev->descriptor.idProduct));
/* our known interfaces have 3 alternate settings */
- if (intf->num_altsetting != 3)
+ if (intf->num_altsetting != 3) {
+ usb_put_dev(usbdev);
return -ENODEV;
-
+ }
i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
- printk(KERN_DEBUG "uss720: set inteface result %d\n", i);
+ dbg("set inteface result %d", i);
interface = intf->cur_altsetting;
/*
* Allocate parport interface
*/
- printk(KERN_INFO "uss720: (C) 1999 by Thomas Sailer, <sailer@ife.ee.ethz.ch>\n");
-
- if (!(priv = kmalloc(sizeof(struct parport_uss720_private), GFP_KERNEL)))
+ if (!(priv = kcalloc(sizeof(struct parport_uss720_private), 1, GFP_KERNEL))) {
+ usb_put_dev(usbdev);
return -ENOMEM;
+ }
+ priv->pp = NULL;
+ priv->usbdev = usbdev;
+ kref_init(&priv->ref_count);
+ spin_lock_init(&priv->asynclock);
+ INIT_LIST_HEAD(&priv->asynclist);
if (!(pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops))) {
- printk(KERN_WARNING "usb-uss720: could not register parport\n");
+ warn("could not register parport");
goto probe_abort;
}
+ priv->pp = pp;
pp->private_data = priv;
- priv->usbdev = usbdev;
pp->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP | PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
/* set the USS720 control register to manual mode, no ECP compression, enable all ints */
- set_1284_register(pp, 7, 0x00);
- set_1284_register(pp, 6, 0x30); /* PS/2 mode */
- set_1284_register(pp, 2, 0x0c);
+ set_1284_register(pp, 7, 0x00, GFP_KERNEL);
+ set_1284_register(pp, 6, 0x30, GFP_KERNEL); /* PS/2 mode */
+ set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
/* debugging */
- get_1284_register(pp, 0, NULL);
- printk("uss720: reg: %02x %02x %02x %02x %02x %02x %02x\n",
- priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]);
+ get_1284_register(pp, 0, ®, GFP_KERNEL);
+ dbg("reg: %02x %02x %02x %02x %02x %02x %02x",
+ priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]);
endpoint = &interface->endpoint[2];
- printk(KERN_DEBUG "uss720: epaddr %d interval %d\n", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval);
-#if 0
- priv->irqpipe = usb_rcvctrlpipe(usbdev, endpoint->bEndpointAddress);
- i = usb_request_irq(usbdev, priv->irqpipe,
- uss720_irq, endpoint->bInterval,
- pp, &priv->irqhandle);
- if (i) {
- printk (KERN_WARNING "usb-uss720: usb_request_irq failed (0x%x)\n", i);
- goto probe_abort_port;
- }
-#endif
+ dbg("epaddr %d interval %d", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval);
parport_announce_port(pp);
- usb_set_intfdata (intf, pp);
+ usb_set_intfdata(intf, pp);
return 0;
-#if 0
-probe_abort_port:
- parport_put_port(pp);
-#endif
probe_abort:
- kfree(priv);
+ kill_all_async_requests_priv(priv);
+ kref_put(&priv->ref_count, destroy_priv);
return -ENODEV;
}
static void uss720_disconnect(struct usb_interface *intf)
{
- struct parport *pp = usb_get_intfdata (intf);
+ struct parport *pp = usb_get_intfdata(intf);
struct parport_uss720_private *priv;
+ struct usb_device *usbdev;
- usb_set_intfdata (intf, NULL);
+ dbg("disconnect");
+ usb_set_intfdata(intf, NULL);
if (pp) {
priv = pp->private_data;
- parport_remove_port(pp);
-#if 0
- usb_release_irq(usbdev, priv->irqhandle, priv->irqpipe);
-#endif
+ usbdev = priv->usbdev;
priv->usbdev = NULL;
+ priv->pp = NULL;
+ dbg("parport_remove_port");
+ parport_remove_port(pp);
parport_put_port(pp);
- kfree(priv);
+ kill_all_async_requests_priv(priv);
+ kref_put(&priv->ref_count, destroy_priv);
}
+ dbg("disconnect done");
}
/* table of cables that work through this driver */
@@ -647,8 +791,8 @@
/* --------------------------------------------------------------------- */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
static int __init uss720_init(void)
@@ -659,6 +803,9 @@
goto out;
info(DRIVER_VERSION ":" DRIVER_DESC);
+ info("NOTE: this is a special purpose driver to allow nonstandard");
+ info("protocols (eg. bitbang) over USS720 usb to parallel cables");
+ info("If you just want to connect to a printer, use usblp instead");
out:
return retval;
}
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 417464d..17d0190 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -79,7 +79,7 @@
return '-';
if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)
- return 'D';
+ return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX);
if (urb->setup_packet == NULL)
return 'Z'; /* '0' would be not as pretty. */
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 4ace996..97c78c2 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -32,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.04"
+#define DRIVER_VERSION "v0.05"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -54,8 +54,11 @@
static int debug;
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 05c44ae..9ee1aaf 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -610,8 +610,7 @@
timeout = max((HZ*2560)/bps,HZ/10);
else
timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
+ schedule_timeout_interruptible(timeout);
dbg("%s - stopping urbs", __FUNCTION__);
usb_kill_urb (port->interrupt_in_urb);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0a6e8b4..4e434cb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -914,7 +914,7 @@
unsigned interfaces;
/* Assume it is not the original SIO device for now. */
- priv->baud_base = 48000000 / 16;
+ priv->baud_base = 48000000 / 2;
priv->write_offset = 0;
version = le16_to_cpu(udev->descriptor.bcdDevice);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 4614741..3cf245b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -95,6 +95,7 @@
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+ { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
{ } /* Terminating entry */
};
@@ -652,8 +653,7 @@
timeout = max((HZ*2560)/bps,HZ/10);
else
timeout = 2*HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(timeout);
+ schedule_timeout_interruptible(timeout);
/* shutdown our urbs */
dbg("%s - shutting down urbs", __FUNCTION__);
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index b734c40..7be9644 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -58,3 +58,7 @@
#define SYNTECH_VENDOR_ID 0x0745
#define SYNTECH_PRODUCT_ID 0x0001
+
+/* Nokia CA-42 Cable */
+#define NOKIA_CA42_VENDOR_ID 0x078b
+#define NOKIA_CA42_PRODUCT_ID 0x1234
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index d34dc9f..4837524 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -227,42 +227,42 @@
***********************************************************************/
/* Command timeout and abort */
-/* This is always called with scsi_lock(host) held */
static int command_abort(struct scsi_cmnd *srb)
{
struct us_data *us = host_to_us(srb->device->host);
US_DEBUGP("%s called\n", __FUNCTION__);
+ /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
+ * bits are protected by the host lock. */
+ scsi_lock(us_to_host(us));
+
/* Is this command still active? */
if (us->srb != srb) {
+ scsi_unlock(us_to_host(us));
US_DEBUGP ("-- nothing to abort\n");
return FAILED;
}
/* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
* a device reset isn't already in progress (to avoid interfering
- * with the reset). To prevent races with auto-reset, we must
- * stop any ongoing USB transfers while still holding the host
- * lock. */
+ * with the reset). Note that we must retain the host lock while
+ * calling usb_stor_stop_transport(); otherwise it might interfere
+ * with an auto-reset that begins as soon as we release the lock. */
set_bit(US_FLIDX_TIMED_OUT, &us->flags);
if (!test_bit(US_FLIDX_RESETTING, &us->flags)) {
set_bit(US_FLIDX_ABORTING, &us->flags);
usb_stor_stop_transport(us);
}
+ scsi_unlock(us_to_host(us));
/* Wait for the aborted command to finish */
wait_for_completion(&us->notify);
-
- /* Reacquire the lock and allow USB transfers to resume */
- clear_bit(US_FLIDX_ABORTING, &us->flags);
- clear_bit(US_FLIDX_TIMED_OUT, &us->flags);
return SUCCESS;
}
/* This invokes the transport reset mechanism to reset the state of the
* device */
-/* This is always called with scsi_lock(host) held */
static int device_reset(struct scsi_cmnd *srb)
{
struct us_data *us = host_to_us(srb->device->host);
@@ -279,7 +279,6 @@
}
/* Simulate a SCSI bus reset by resetting the device's USB port. */
-/* This is always called with scsi_lock(host) held */
static int bus_reset(struct scsi_cmnd *srb)
{
struct us_data *us = host_to_us(srb->device->host);
@@ -291,7 +290,6 @@
result = usb_stor_port_reset(us);
up(&(us->dev_semaphore));
- /* lock the host for the return */
return result < 0 ? FAILED : SUCCESS;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ad0cfd7..b79dad1 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -86,6 +86,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
+ * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
+ * for USB floppies that need the SINGLE_LUN enforcement.
+ */
+UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
+ "NEC",
+ "NEC USB UF000x",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
@@ -96,6 +106,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
+UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
+ "SMSC",
+ "FDC GOLD-2.30",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
@@ -103,6 +120,24 @@
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif
+/*
+ * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
+ * The key does not actually break, but it returns zero sense which
+ * makes our SCSI stack to print confusing messages.
+ */
+UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
+ "USBest Technology", /* sold by Transcend */
+ "USB Mass Storage Device",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/* Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
+ "Neuros Audio",
+ "USB 2.0 HD 2.5",
+ US_SC_DEVICE, US_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index cb4c770..f9a9bfa 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -392,11 +392,16 @@
/* If an abort request was received we need to signal that
* the abort has finished. The proper test for this is
* the TIMED_OUT flag, not srb->result == DID_ABORT, because
- * a timeout/abort request might be received after all the
- * USB processing was complete. */
- if (test_bit(US_FLIDX_TIMED_OUT, &us->flags))
+ * the timeout might have occurred after the command had
+ * already completed with a different result code. */
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
complete(&(us->notify));
+ /* Allow USB transfers to resume */
+ clear_bit(US_FLIDX_ABORTING, &us->flags);
+ clear_bit(US_FLIDX_TIMED_OUT, &us->flags);
+ }
+
/* finished working on this command */
us->srb = NULL;
scsi_unlock(host);
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 5fe182d..eb83a78 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -137,7 +137,7 @@
config FONT_8x16
bool "VGA 8x16 font" if FONTS
- depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON
default y if !SPARC32 && !SPARC64 && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index b562f6b..42c7b8d 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -33,6 +33,10 @@
obj-$(CONFIG_FB_STI) += sticore.o font.o
+ifeq ($(CONFIG_USB_SISUSBVGA_CON),y)
+obj-$(CONFIG_USB_SISUSBVGA) += font.o
+endif
+
# Targets that kbuild needs to know about
targets := promcon_tbl.c
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index fb57c22..9facf73 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -32,7 +32,6 @@
#define _LINUX_USBDEVICE_FS_H
#include <linux/types.h>
-#include <linux/compat.h>
/* --------------------------------------------------------------------- */
@@ -125,6 +124,7 @@
};
#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
struct usbdevfs_urb32 {
unsigned char type;
unsigned char endpoint;