V4L/DVB (3774): Create V4L1 config options
V4L1 API is depreciated and should be removed soon from kernel. This patch
adds two new options, one to disable V4L1 drivers, and another to disable
V4L1 compat module. This way, it would be easy to check what still depends
on V4L1 stuff, allowing also to test if app works fine with V4L2 only support.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index fffc711..344d83a 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,22 +8,54 @@
tristate "Video For Linux"
---help---
Support for audio/video capture and overlay devices and FM radio
- cards. The exact capabilities of each device vary. User tools for
- this are available from
- <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+ cards. The exact capabilities of each device vary.
This kernel includes support for the new Video for Linux Two API,
(V4L2) as well as the original system. Drivers and applications
need to be rewritten to use V4L2, but drivers for popular cards
and applications for most video capture functions already exist.
- Documentation for the original API is included in the file
- <file:Documentation/video4linux/API.html>. Documentation for V4L2 is
- available on the web at <http://bytesex.org/v4l/>.
+ Additional info and docs are available on the web at
+ <http://linuxtv.org>
+
+ Documentation for V4L2 is also available on the web at
+ <http://bytesex.org/v4l/>.
To compile this driver as a module, choose M here: the
module will be called videodev.
+config VIDEO_V4L1
+ boolean "Enable Video For Linux API 1 (DEPRECATED)"
+ depends on VIDEO_DEV
+ select VIDEO_V4L1_COMPAT
+ default y
+ ---help---
+ Enables a compatibility API used by most V4L2 devices to allow
+ its usage with legacy applications that supports only V4L1 api.
+
+ If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L1_COMPAT
+ boolean "Enable Video For Linux API 1 compatible Layer"
+ depends on VIDEO_DEV
+ default y
+ ---help---
+ This api were developed to be used at Kernel 2.2 and 2.4, but
+ lacks support for several video standards. There are several
+ drivers at kernel that still depends on it.
+
+ Documentation for the original API is included in the file
+ <Documentation/video4linux/API.html>.
+
+ User tools for this are available from
+ <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+ If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L2
+ tristate
+ default y
+
source "drivers/media/video/Kconfig"
source "drivers/media/radio/Kconfig"
@@ -65,4 +97,3 @@
module will be called dabusb.
endmenu
-
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 6a901a0..9c45b98 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -4,6 +4,7 @@
config VIDEO_SAA7146_VV
tristate
+ select VIDEO_V4L2
select VIDEO_BUF
select VIDEO_VIDEOBUF
select VIDEO_SAA7146
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 5b2aadb..c26e232 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,8 +1,7 @@
config DVB_AV7110
tristate "AV7110 cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && VIDEO_V4L1
select FW_LOADER
- select VIDEO_DEV
select VIDEO_SAA7146_VV
select DVB_VES1820
select DVB_VES1X93
@@ -59,7 +58,7 @@
config DVB_BUDGET
tristate "Budget cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0299
select DVB_VES1X93
@@ -80,7 +79,7 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0297
select DVB_STV0299
@@ -100,8 +99,7 @@
config DVB_BUDGET_AV
tristate "Budget cards with analog video inputs"
- depends on DVB_CORE && PCI
- select VIDEO_DEV
+ depends on DVB_CORE && PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
select DVB_STV0299
select DVB_TDA1004X
@@ -119,7 +117,7 @@
config DVB_BUDGET_PATCH
tristate "AV7110 cards with Budget Patch"
- depends on DVB_CORE && DVB_BUDGET
+ depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
select DVB_AV7110
select DVB_STV0299
select DVB_VES1X93
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be3..3fff757 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -25,7 +25,7 @@
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -59,7 +59,7 @@
config RADIO_RTRACK2
tristate "AIMSlab RadioTrack II support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -82,7 +82,7 @@
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -106,7 +106,7 @@
config RADIO_GEMTEK
tristate "GemTek Radio Card support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -131,7 +131,7 @@
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
- depends on VIDEO_DEV && PCI
+ depends on VIDEO_V4L1 && PCI
---help---
Choose Y here if you have this PCI FM radio card.
@@ -145,7 +145,7 @@
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_DEV && PCI
+ depends on VIDEO_V4L1 && PCI
---help---
Choose Y here if you have this radio card. This card may also be
found as Gemtek PCI FM.
@@ -160,7 +160,7 @@
config RADIO_MAESTRO
tristate "Maestro on board radio"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
Say Y here to directly support the on-board radio tuner on the
Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+ depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
---help---
Choose Y here if you have this FM radio card. You also need to say Y
to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@
config RADIO_SF16FMI
tristate "SF16FMI Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards. If you
compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards.
@@ -239,7 +239,7 @@
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below. (TODO)
@@ -268,7 +268,7 @@
config RADIO_TRUST
tristate "Trust FM radio card"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
help
This is a driver for the Trust FM radio cards. Say Y if you have
such a card and want to use it under Linux.
@@ -286,7 +286,7 @@
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 85888a8..bff9d8f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,10 +2,10 @@
# Multimedia Video device configuration
#
-menu "Video For Linux"
+menu "Video Capture Adapters"
depends on VIDEO_DEV
-comment "Video Adapters"
+comment "Video Capture Adapters"
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
@@ -20,7 +20,7 @@
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on VIDEO_DEV && I2C && VIDEO_BT848
+ depends on I2C && VIDEO_BT848
help
Support for Radio Data System (RDS) decoder. This allows seeing
@@ -32,7 +32,7 @@
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on VIDEO_DEV && ISA
+ depends on ISA && VIDEO_V4L1
help
Say Y if you have such a thing.
@@ -41,7 +41,7 @@
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_DEV && BROKEN
+ depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
@@ -52,7 +52,7 @@
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on VIDEO_DEV && PARPORT
+ depends on PARPORT && VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
@@ -62,7 +62,7 @@
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
@@ -73,7 +73,7 @@
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
@@ -86,7 +86,7 @@
config VIDEO_CPIA
tristate "CPiA Video For Linux"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -123,7 +123,7 @@
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
@@ -150,7 +150,7 @@
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+ depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
select I2C_ALGO_SGI
help
Say Y here to build in support for the Vino video input system found
@@ -158,7 +158,7 @@
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PCI
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
@@ -166,7 +166,7 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
@@ -214,7 +214,7 @@
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && BROKEN
+ depends on PCI && I2C && VIDEO_V4L1 && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -226,7 +226,7 @@
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on VIDEO_DEV && PCI && SONYPI
+ depends on PCI && SONYPI && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
@@ -242,7 +242,7 @@
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_TUNER
---help---
@@ -254,8 +254,9 @@
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the 'dpc7146 demonstration
board' by Philips-Semiconductors. It's the reference design
@@ -268,8 +269,9 @@
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
@@ -279,8 +281,9 @@
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
@@ -293,7 +296,7 @@
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
---help---
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
@@ -304,7 +307,7 @@
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R
+ depends on M32R && VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
@@ -365,17 +368,17 @@
source "drivers/media/video/cx25840/Kconfig"
config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
+ depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Old support for the Philips SAA7113/4 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Philips SAA7127/9 digital video encoders.
@@ -384,7 +387,7 @@
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
@@ -396,7 +399,7 @@
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
@@ -418,7 +421,7 @@
config USB_DSBR
tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
---help---
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -434,7 +437,7 @@
config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -445,7 +448,7 @@
config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -458,7 +461,7 @@
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
@@ -470,7 +473,7 @@
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_DEV && I2C
+ depends on USB && VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index b3ea2d6..11b06da 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,7 +10,8 @@
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_V4L1_COMPAT) += v4l1-compat.o
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 085477c..153f6a4 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_BT848
tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 72a417b..694d1d8 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -35,8 +35,10 @@
#include "cx88.h"
#include <media/v4l2-common.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Include V4L1 specific functions. Should be removed soon */
#include <linux/videodev.h>
+#endif
MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5a793ae..dfb15bf 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_DEV && USB && I2C
+ depends on VIDEO_V4L1 && USB && I2C
select VIDEO_BUF
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index 6c43a90..c6bff70 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
config USB_ET61X251
tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on Etoms ET61X151
or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8637655..53cbc95 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
config USB_PWC
tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index aeef80f..e4156ec 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -31,8 +31,10 @@
#include "saa7134.h"
#include <media/v4l2-common.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Include V4L1 specific functions. Should be removed soon */
#include <linux/videodev.h>
+#endif
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 55f2bc1..cf552e6 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
config USB_SN9C102
tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102 or SN9C103 PC Camera Controllers.
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 08a5d20..39269a2 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@
config USB_VICAM
tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
select VIDEO_USBVIDEO
---help---
Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@
config USB_KONICAWC
tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want support for webcams based on a Konica
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e81340..9e42224 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -26,6 +26,10 @@
#include <linux/random.h>
#include <linux/version.h>
#include <linux/videodev2.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+/* Include V4L1 specific functions. Should be removed soon */
+#include <linux/videodev.h>
+#endif
#include <linux/interrupt.h>
#include <media/video-buf.h>
#include <media/v4l2-common.h>
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index c3bf886..115833e 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
config USB_ZC0301
tristate "USB ZC0301 Image Processor and Control Chip support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on the ZC0301
Image Processor and Control Chip.