| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c/sx150x.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <asm/mach-types.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/board.h> |
| #include <mach/irqs-7xxx.h> |
| #include "devices-msm7x2xa.h" |
| #include "board-msm7627a.h" |
| #include <mach/vreg.h> |
| |
| #ifdef CONFIG_MSM_CAMERA_V4L2 |
| static uint32_t camera_off_gpio_table[] = { |
| GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), |
| }; |
| |
| static uint32_t camera_on_gpio_table[] = { |
| GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), |
| }; |
| |
| #ifdef CONFIG_MSM_CAMERA_FLASH |
| static struct msm_camera_sensor_flash_src msm_flash_src = { |
| .flash_sr_type = MSM_CAMERA_FLASH_SRC_EXT, |
| ._fsrc.ext_driver_src.led_en = GPIO_CAM_GP_LED_EN1, |
| ._fsrc.ext_driver_src.led_flash_en = GPIO_CAM_GP_LED_EN2, |
| }; |
| #endif |
| |
| static struct regulator_bulk_data regs_camera[] = { |
| { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 }, |
| { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 }, |
| { .supply = "usb2", .min_uV = 1800000, .max_uV = 1800000 }, |
| }; |
| |
| static void msm_camera_vreg_config(int vreg_en) |
| { |
| int rc = vreg_en ? |
| regulator_bulk_enable(ARRAY_SIZE(regs_camera), regs_camera) : |
| regulator_bulk_disable(ARRAY_SIZE(regs_camera), regs_camera); |
| |
| if (rc) |
| pr_err("%s: could not %sable regulators: %d\n", |
| __func__, vreg_en ? "en" : "dis", rc); |
| } |
| |
| static int config_gpio_table(uint32_t *table, int len) |
| { |
| int rc = 0, i = 0; |
| |
| for (i = 0; i < len; i++) { |
| rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE); |
| if (rc) { |
| pr_err("%s not able to get gpio\n", __func__); |
| for (i--; i >= 0; i--) |
| gpio_tlmm_config(camera_off_gpio_table[i], |
| GPIO_CFG_ENABLE); |
| break; |
| } |
| } |
| return rc; |
| } |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_s5k4e1_data; |
| /* TODO: static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data; */ |
| static int config_camera_on_gpios_rear(void) |
| { |
| int rc = 0; |
| |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()) |
| msm_camera_vreg_config(1); |
| |
| rc = config_gpio_table(camera_on_gpio_table, |
| ARRAY_SIZE(camera_on_gpio_table)); |
| if (rc < 0) { |
| pr_err("%s: CAMSENSOR gpio table request" |
| "failed\n", __func__); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static void config_camera_off_gpios_rear(void) |
| { |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()) |
| msm_camera_vreg_config(0); |
| |
| config_gpio_table(camera_off_gpio_table, |
| ARRAY_SIZE(camera_off_gpio_table)); |
| } |
| |
| static int config_camera_on_gpios_front(void) |
| { |
| int rc = 0; |
| |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()) |
| msm_camera_vreg_config(1); |
| |
| rc = config_gpio_table(camera_on_gpio_table, |
| ARRAY_SIZE(camera_on_gpio_table)); |
| if (rc < 0) { |
| pr_err("%s: CAMSENSOR gpio table request" |
| "failed\n", __func__); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static void config_camera_off_gpios_front(void) |
| { |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()) |
| msm_camera_vreg_config(0); |
| |
| config_gpio_table(camera_off_gpio_table, |
| ARRAY_SIZE(camera_off_gpio_table)); |
| } |
| |
| struct msm_camera_device_platform_data msm_camera_device_data_csi1 = { |
| .camera_gpio_on = config_camera_on_gpios_rear, |
| .camera_gpio_off = config_camera_off_gpios_rear, |
| .ioclk.mclk_clk_rate = 24000000, |
| .ioclk.vfe_clk_rate = 192000000, |
| .csid_core = 1, |
| .is_csic = 1, |
| }; |
| |
| struct msm_camera_device_platform_data msm_camera_device_data_csi0 = { |
| .camera_gpio_on = config_camera_on_gpios_front, |
| .camera_gpio_off = config_camera_off_gpios_front, |
| .ioclk.mclk_clk_rate = 24000000, |
| .ioclk.vfe_clk_rate = 192000000, |
| .csid_core = 0, |
| }; |
| |
| #ifdef CONFIG_DW9712_ACT |
| static struct i2c_board_info s5k4e1_actuator_i2c_info = { |
| I2C_BOARD_INFO("dw9712_act", 0x8C >> 1), |
| }; |
| |
| static struct msm_actuator_info s5k4e1_actuator_info = { |
| .board_info = &s5k4e1_actuator_i2c_info, |
| .bus_id = MSM_GSBI0_QUP_I2C_BUS_ID, |
| .vcm_pwd = GPIO_CAM_GP_CAM_PWDN, |
| .vcm_enable = 1, |
| }; |
| #endif |
| |
| #ifdef CONFIG_S5K4E1 |
| static struct msm_camera_sensor_flash_data flash_s5k4e1 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_platform_info sensor_board_info_s5k4e1 = { |
| .mount_angle = 90, |
| .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N, |
| .sensor_pwd = 85, |
| .vcm_pwd = GPIO_CAM_GP_CAM_PWDN, |
| .vcm_enable = 1, |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_s5k4e1_data = { |
| .sensor_name = "s5k4e1", |
| .sensor_reset_enable = 1, |
| .pmic_gpio_enable = 0, |
| .pdata = &msm_camera_device_data_csi1, |
| .flash_data = &flash_s5k4e1, |
| .sensor_platform_info = &sensor_board_info_s5k4e1, |
| .csi_if = 1, |
| .camera_type = BACK_CAMERA_2D, |
| #ifdef CONFIG_DW9712_ACT |
| .actuator_info = &s5k4e1_actuator_info |
| #endif |
| }; |
| #endif |
| |
| #ifdef CONFIG_MT9E013 |
| static struct msm_camera_sensor_flash_data flash_mt9e013 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_platform_info sensor_board_info_mt9e013 = { |
| .mount_angle = 90, |
| .sensor_reset = 0, |
| .sensor_pwd = 85, |
| .vcm_pwd = 1, |
| .vcm_enable = 0, |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_mt9e013_data = { |
| .sensor_name = "mt9e013", |
| .sensor_reset_enable = 1, |
| .pmic_gpio_enable = 0, |
| .pdata = &msm_camera_device_data_csi1, |
| .flash_data = &flash_mt9e013, |
| .sensor_platform_info = &sensor_board_info_mt9e013, |
| .csi_if = 1, |
| .camera_type = BACK_CAMERA_2D, |
| }; |
| #endif |
| |
| #ifdef CONFIG_IMX072 |
| static struct msm_camera_sensor_platform_info imx072_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_imx072 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_imx072_data = { |
| .sensor_name = "imx072", |
| .sensor_reset_enable = 1, |
| .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N, /* TODO 106,*/ |
| .pmic_gpio_enable = 0, |
| .sensor_pwd = 85, |
| .vcm_pwd = GPIO_CAM_GP_CAM_PWDN, |
| .vcm_enable = 1, |
| .pdata = &msm_camera_device_data_csi1, |
| .flash_data = &flash_imx072, |
| .sensor_platform_info = &imx072_sensor_7627a_info, |
| .csi_if = 1 |
| }; |
| |
| static struct platform_device msm_camera_sensor_imx072 = { |
| .name = "msm_camera_imx072", |
| .dev = { |
| .platform_data = &msm_camera_sensor_imx072_data, |
| }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_WEBCAM_OV9726 |
| static struct msm_camera_sensor_flash_data flash_ov9726 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_platform_info sensor_board_info_ov9726 = { |
| .mount_angle = 90, |
| .sensor_reset = GPIO_CAM_GP_CAM1MP_XCLR, |
| .sensor_pwd = 85, |
| .vcm_pwd = 1, |
| .vcm_enable = 0, |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data = { |
| .sensor_name = "ov9726", |
| .sensor_reset_enable = 0, |
| .pmic_gpio_enable = 0, |
| .pdata = &msm_camera_device_data_csi0, |
| .flash_data = &flash_ov9726, |
| .sensor_platform_info = &sensor_board_info_ov9726, |
| .csi_if = 1, |
| .camera_type = FRONT_CAMERA_2D, |
| }; |
| #endif |
| |
| static void __init msm7x27a_init_cam(void) |
| { |
| platform_device_register(&msm7x27a_device_csic0); |
| platform_device_register(&msm7x27a_device_csic1); |
| platform_device_register(&msm7x27a_device_clkctl); |
| platform_device_register(&msm7x27a_device_vfe); |
| } |
| |
| static struct i2c_board_info i2c_camera_devices[] = { |
| #ifdef CONFIG_S5K4E1 |
| { |
| I2C_BOARD_INFO("s5k4e1", 0x36), |
| .platform_data = &msm_camera_sensor_s5k4e1_data, |
| }, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV9726 |
| { |
| I2C_BOARD_INFO("ov9726", 0x10), |
| .platform_data = &msm_camera_sensor_ov9726_data, |
| }, |
| #endif |
| #ifdef CONFIG_IMX072 |
| { |
| I2C_BOARD_INFO("imx072", 0x34), |
| }, |
| #endif |
| #ifdef CONFIG_MT9E013 |
| { |
| I2C_BOARD_INFO("mt9e013", 0x6C >> 2), |
| .platform_data = &msm_camera_sensor_mt9e013_data, |
| }, |
| #endif |
| { |
| I2C_BOARD_INFO("sc628a", 0x6E), |
| }, |
| }; |
| #else |
| static uint32_t camera_off_gpio_table[] = { |
| GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), |
| }; |
| |
| static uint32_t camera_on_gpio_table[] = { |
| GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), |
| }; |
| |
| #ifdef CONFIG_MSM_CAMERA_FLASH |
| static struct msm_camera_sensor_flash_src msm_flash_src = { |
| .flash_sr_type = MSM_CAMERA_FLASH_SRC_EXT, |
| ._fsrc.ext_driver_src.led_en = GPIO_CAM_GP_LED_EN1, |
| ._fsrc.ext_driver_src.led_flash_en = GPIO_CAM_GP_LED_EN2, |
| }; |
| #endif |
| |
| static struct regulator_bulk_data regs_camera[] = { |
| { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 }, |
| { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 }, |
| { .supply = "usb2", .min_uV = 1800000, .max_uV = 1800000 }, |
| }; |
| |
| static void qrd1_camera_gpio_cfg(void) |
| { |
| |
| int rc = 0; |
| |
| rc = gpio_request(QRD_GPIO_CAM_5MP_SHDN_EN, "ov5640"); |
| if (rc < 0) |
| pr_err("%s: gpio_request---GPIO_CAM_5MP_SHDN_EN failed!", |
| __func__); |
| |
| |
| rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_CAM_5MP_SHDN_EN, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s: unable to enable Power Down gpio for main" |
| "camera!\n", __func__); |
| gpio_free(QRD_GPIO_CAM_5MP_SHDN_EN); |
| } |
| |
| |
| rc = gpio_request(QRD_GPIO_CAM_5MP_RESET, "ov5640"); |
| if (rc < 0) { |
| pr_err("%s: gpio_request---GPIO_CAM_5MP_RESET failed!", |
| __func__); |
| gpio_free(QRD_GPIO_CAM_5MP_SHDN_EN); |
| } |
| |
| |
| rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_CAM_5MP_RESET, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s: unable to enable reset gpio for main camera!\n", |
| __func__); |
| gpio_free(QRD_GPIO_CAM_5MP_RESET); |
| } |
| |
| rc = gpio_request(QRD_GPIO_CAM_3MP_PWDN, "ov7692"); |
| if (rc < 0) |
| pr_err("%s: gpio_request---GPIO_CAM_3MP_PWDN failed!", |
| __func__); |
| |
| rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_CAM_3MP_PWDN, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s: unable to enable Power Down gpio for front" |
| "camera!\n", __func__); |
| gpio_free(QRD_GPIO_CAM_3MP_PWDN); |
| } |
| |
| gpio_direction_output(QRD_GPIO_CAM_5MP_SHDN_EN, 1); |
| gpio_direction_output(QRD_GPIO_CAM_5MP_RESET, 1); |
| gpio_direction_output(QRD_GPIO_CAM_3MP_PWDN, 1); |
| } |
| |
| #define GPIO_SKU3_CAM_5MP_SHDN_N 5 /* PWDN */ |
| #define GPIO_SKU3_CAM_5MP_CAMIF_RESET 6 /* (board_is(EVT))?123:121 RESET */ |
| #define GPIO_SKU3_CAM_5MP_CAM_DRIVER_PWDN 30 |
| |
| #define GPIO_SKU1_CAM_VGA_SHDN 18 |
| #define GPIO_SKU1_CAM_VGA_RESET_N 29 |
| |
| static void evb_camera_gpio_cfg(void) |
| { |
| int rc = 0; |
| |
| rc = gpio_request(GPIO_SKU3_CAM_5MP_SHDN_N, "ov5647"); |
| if (rc < 0) |
| pr_err("%s: gpio_request GPIO_SKU3_CAM_5MP_SHDN_N failed!", |
| __func__); |
| |
| pr_debug("gpio_tlmm_config %d\r\n", GPIO_SKU3_CAM_5MP_SHDN_N); |
| rc = gpio_tlmm_config(GPIO_CFG(GPIO_SKU3_CAM_5MP_SHDN_N, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s:unable to enable Powr Dwn gpio for main camera!\n", |
| __func__); |
| gpio_free(GPIO_SKU3_CAM_5MP_SHDN_N); |
| } |
| |
| gpio_direction_output(GPIO_SKU3_CAM_5MP_SHDN_N, 1); |
| |
| rc = gpio_request(GPIO_SKU3_CAM_5MP_CAMIF_RESET, "ov5647"); |
| if (rc < 0) |
| pr_err("%s: gpio_request GPIO_SKU3_CAM_5MP_CAMIF_RESET failed!", |
| __func__); |
| |
| pr_debug("gpio_tlmm_config %d\r\n", GPIO_SKU3_CAM_5MP_CAMIF_RESET); |
| rc = gpio_tlmm_config(GPIO_CFG(GPIO_SKU3_CAM_5MP_CAMIF_RESET, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s: unable to enable reset gpio for main camera!\n", |
| __func__); |
| gpio_free(GPIO_SKU3_CAM_5MP_CAMIF_RESET); |
| } |
| |
| gpio_direction_output(GPIO_SKU3_CAM_5MP_CAMIF_RESET, 1); |
| |
| rc = gpio_request(GPIO_SKU1_CAM_VGA_SHDN, "ov7692"); |
| if (rc < 0) |
| pr_err("%s: gpio_request---GPIO_SKU1_CAM_VGA_SHDN failed!", |
| __func__); |
| |
| rc = gpio_tlmm_config(GPIO_CFG(GPIO_SKU1_CAM_VGA_SHDN, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s:unable to enable Powr Dwn gpio for frnt camera!\n", |
| __func__); |
| gpio_free(GPIO_SKU1_CAM_VGA_SHDN); |
| } |
| |
| gpio_direction_output(GPIO_SKU1_CAM_VGA_SHDN, 1); |
| |
| rc = gpio_request(GPIO_SKU1_CAM_VGA_RESET_N, "ov7692"); |
| if (rc < 0) |
| pr_err("%s: gpio_request---GPIO_SKU1_CAM_VGA_RESET_N failed!", |
| __func__); |
| |
| rc = gpio_tlmm_config(GPIO_CFG(GPIO_SKU1_CAM_VGA_RESET_N, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| |
| if (rc < 0) { |
| pr_err("%s: unable to enable reset gpio for front camera!\n", |
| __func__); |
| gpio_free(GPIO_SKU1_CAM_VGA_RESET_N); |
| } |
| gpio_direction_output(GPIO_SKU1_CAM_VGA_RESET_N, 1); |
| |
| } |
| |
| static void msm_camera_vreg_config(int vreg_en) |
| { |
| int rc = vreg_en ? |
| regulator_bulk_enable(ARRAY_SIZE(regs_camera), regs_camera) : |
| regulator_bulk_disable(ARRAY_SIZE(regs_camera), regs_camera); |
| |
| if (rc) |
| pr_err("%s: could not %sable regulators: %d\n", |
| __func__, vreg_en ? "en" : "dis", rc); |
| } |
| |
| static int config_gpio_table(uint32_t *table, int len) |
| { |
| int rc = 0, i = 0; |
| |
| for (i = 0; i < len; i++) { |
| rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE); |
| if (rc) { |
| pr_err("%s not able to get gpio\n", __func__); |
| for (i--; i >= 0; i--) |
| gpio_tlmm_config(camera_off_gpio_table[i], |
| GPIO_CFG_ENABLE); |
| break; |
| } |
| } |
| return rc; |
| } |
| |
| static int config_camera_on_gpios_rear(void) |
| { |
| int rc = 0; |
| |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa() |
| || machine_is_msm7627a_qrd1()) |
| msm_camera_vreg_config(1); |
| |
| rc = config_gpio_table(camera_on_gpio_table, |
| ARRAY_SIZE(camera_on_gpio_table)); |
| if (rc < 0) { |
| pr_err("%s: CAMSENSOR gpio table request" |
| "failed\n", __func__); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static void config_camera_off_gpios_rear(void) |
| { |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa() |
| || machine_is_msm7627a_qrd1()) |
| msm_camera_vreg_config(0); |
| |
| config_gpio_table(camera_off_gpio_table, |
| ARRAY_SIZE(camera_off_gpio_table)); |
| } |
| |
| static int config_camera_on_gpios_front(void) |
| { |
| int rc = 0; |
| |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa() |
| || machine_is_msm7627a_qrd1()) |
| msm_camera_vreg_config(1); |
| |
| rc = config_gpio_table(camera_on_gpio_table, |
| ARRAY_SIZE(camera_on_gpio_table)); |
| if (rc < 0) { |
| pr_err("%s: CAMSENSOR gpio table request" |
| "failed\n", __func__); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static void config_camera_off_gpios_front(void) |
| { |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa() |
| || machine_is_msm7627a_qrd1()) |
| msm_camera_vreg_config(0); |
| |
| config_gpio_table(camera_off_gpio_table, |
| ARRAY_SIZE(camera_off_gpio_table)); |
| } |
| |
| struct msm_camera_device_platform_data msm_camera_device_data_rear = { |
| .camera_gpio_on = config_camera_on_gpios_rear, |
| .camera_gpio_off = config_camera_off_gpios_rear, |
| .ioext.csiphy = 0xA1000000, |
| .ioext.csisz = 0x00100000, |
| .ioext.csiirq = INT_CSI_IRQ_1, |
| .ioclk.mclk_clk_rate = 24000000, |
| .ioclk.vfe_clk_rate = 192000000, |
| .ioext.appphy = MSM7XXX_CLK_CTL_PHYS, |
| .ioext.appsz = MSM7XXX_CLK_CTL_SIZE, |
| }; |
| |
| struct msm_camera_device_platform_data msm_camera_device_data_front = { |
| .camera_gpio_on = config_camera_on_gpios_front, |
| .camera_gpio_off = config_camera_off_gpios_front, |
| .ioext.csiphy = 0xA0F00000, |
| .ioext.csisz = 0x00100000, |
| .ioext.csiirq = INT_CSI_IRQ_0, |
| .ioclk.mclk_clk_rate = 24000000, |
| .ioclk.vfe_clk_rate = 192000000, |
| .ioext.appphy = MSM7XXX_CLK_CTL_PHYS, |
| .ioext.appsz = MSM7XXX_CLK_CTL_SIZE, |
| }; |
| |
| #ifdef CONFIG_OV5647 |
| |
| static struct msm_camera_sensor_platform_info ov5647_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_src msm_flash_src_ov5647 = { |
| .flash_sr_type = MSM_CAMERA_FLASH_SRC_LED, |
| ._fsrc.led_src.led_name = "flashlight", |
| ._fsrc.led_src.led_name_len = 10, |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_ov5647 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src_ov5647, |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_ov5647_data = { |
| .sensor_name = "ov5647", |
| .sensor_reset_enable = 1, |
| .sensor_reset = GPIO_SKU3_CAM_5MP_CAMIF_RESET, |
| .pmic_gpio_enable = 1, |
| .sensor_pwd = GPIO_SKU3_CAM_5MP_SHDN_N, |
| .vcm_pwd = GPIO_SKU3_CAM_5MP_CAM_DRIVER_PWDN, |
| .vcm_enable = 1, |
| .pdata = &msm_camera_device_data_rear, |
| .flash_data = &flash_ov5647, |
| .sensor_platform_info = &ov5647_sensor_7627a_info, |
| .csi_if = 1 |
| }; |
| |
| static struct platform_device msm_camera_sensor_ov5647 = { |
| .name = "msm_camera_ov5647", |
| .dev = { |
| .platform_data = &msm_camera_sensor_ov5647_data, |
| }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_S5K4E1 |
| static struct msm_camera_sensor_platform_info s5k4e1_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_s5k4e1 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_s5k4e1_data = { |
| .sensor_name = "s5k4e1", |
| .sensor_reset_enable = 1, |
| .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N, |
| .pmic_gpio_enable = 0, |
| .sensor_pwd = 85, |
| .vcm_pwd = GPIO_CAM_GP_CAM_PWDN, |
| .vcm_enable = 1, |
| .pdata = &msm_camera_device_data_rear, |
| .flash_data = &flash_s5k4e1, |
| .sensor_platform_info = &s5k4e1_sensor_7627a_info, |
| .csi_if = 1 |
| }; |
| |
| static struct platform_device msm_camera_sensor_s5k4e1 = { |
| .name = "msm_camera_s5k4e1", |
| .dev = { |
| .platform_data = &msm_camera_sensor_s5k4e1_data, |
| }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_IMX072 |
| static struct msm_camera_sensor_platform_info imx072_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_imx072 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_imx072_data = { |
| .sensor_name = "imx072", |
| .sensor_reset_enable = 1, |
| .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N, /* TODO 106,*/ |
| .pmic_gpio_enable = 0, |
| .sensor_pwd = 85, |
| .vcm_pwd = GPIO_CAM_GP_CAM_PWDN, |
| .vcm_enable = 1, |
| .pdata = &msm_camera_device_data_rear, |
| .flash_data = &flash_imx072, |
| .sensor_platform_info = &imx072_sensor_7627a_info, |
| .csi_if = 1 |
| }; |
| |
| static struct platform_device msm_camera_sensor_imx072 = { |
| .name = "msm_camera_imx072", |
| .dev = { |
| .platform_data = &msm_camera_sensor_imx072_data, |
| }, |
| }; |
| #endif |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data; |
| #ifdef CONFIG_WEBCAM_OV9726 |
| static struct msm_camera_sensor_platform_info ov9726_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_ov9726 = { |
| .flash_type = MSM_CAMERA_FLASH_NONE, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data = { |
| .sensor_name = "ov9726", |
| .sensor_reset_enable = 0, |
| .sensor_reset = GPIO_CAM_GP_CAM1MP_XCLR, |
| .pmic_gpio_enable = 0, |
| .sensor_pwd = 85, |
| .vcm_pwd = 1, |
| .vcm_enable = 0, |
| .pdata = &msm_camera_device_data_front, |
| .flash_data = &flash_ov9726, |
| .sensor_platform_info = &ov9726_sensor_7627a_info, |
| .csi_if = 1 |
| }; |
| |
| static struct platform_device msm_camera_sensor_ov9726 = { |
| .name = "msm_camera_ov9726", |
| .dev = { |
| .platform_data = &msm_camera_sensor_ov9726_data, |
| }, |
| }; |
| #else |
| static inline void msm_camera_vreg_init(void) { } |
| #endif |
| |
| #ifdef CONFIG_MT9E013 |
| static struct msm_camera_sensor_platform_info mt9e013_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_mt9e013 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_mt9e013_data = { |
| .sensor_name = "mt9e013", |
| .sensor_reset = 0, |
| .sensor_reset_enable = 1, |
| .pmic_gpio_enable = 0, |
| .sensor_pwd = 85, |
| .vcm_pwd = 1, |
| .vcm_enable = 0, |
| .pdata = &msm_camera_device_data_rear, |
| .flash_data = &flash_mt9e013, |
| .sensor_platform_info = &mt9e013_sensor_7627a_info, |
| .csi_if = 1 |
| }; |
| |
| static struct platform_device msm_camera_sensor_mt9e013 = { |
| .name = "msm_camera_mt9e013", |
| .dev = { |
| .platform_data = &msm_camera_sensor_mt9e013_data, |
| }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_OV5640 |
| static struct msm_camera_sensor_platform_info ov5640_sensor_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_src msm_flash_src_ov5640 = { |
| .flash_sr_type = MSM_CAMERA_FLASH_SRC_LED, |
| ._fsrc.led_src.led_name = "flashlight", |
| ._fsrc.led_src.led_name_len = 10, |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_ov5640 = { |
| .flash_type = MSM_CAMERA_FLASH_LED, |
| .flash_src = &msm_flash_src_ov5640, |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_ov5640_data = { |
| .sensor_name = "ov5640", |
| .sensor_reset_enable = 1, |
| .pmic_gpio_enable = 0, |
| .sensor_reset = QRD_GPIO_CAM_5MP_RESET, |
| .sensor_pwd = QRD_GPIO_CAM_5MP_SHDN_EN, |
| .vcm_pwd = 0, |
| .vcm_enable = 0, |
| .pdata = &msm_camera_device_data_rear, |
| .flash_data = &flash_ov5640, |
| .sensor_platform_info = &ov5640_sensor_info, |
| .csi_if = 1, |
| }; |
| |
| static struct platform_device msm_camera_sensor_ov5640 = { |
| .name = "msm_camera_ov5640", |
| .dev = { |
| .platform_data = &msm_camera_sensor_ov5640_data, |
| }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_WEBCAM_OV7692_QRD |
| static struct msm_camera_sensor_platform_info ov7692_sensor_7627a_info = { |
| .mount_angle = 90 |
| }; |
| |
| static struct msm_camera_sensor_flash_data flash_ov7692 = { |
| .flash_type = MSM_CAMERA_FLASH_NONE, |
| }; |
| |
| static struct msm_camera_sensor_info msm_camera_sensor_ov7692_data = { |
| .sensor_name = "ov7692", |
| .sensor_reset_enable = 0, |
| .pmic_gpio_enable = 1, |
| .sensor_reset = GPIO_SKU1_CAM_VGA_RESET_N, |
| .sensor_pwd = GPIO_SKU1_CAM_VGA_SHDN, |
| .vcm_pwd = 0, |
| .vcm_enable = 0, |
| .pdata = &msm_camera_device_data_front, |
| .flash_data = &flash_ov7692, |
| .sensor_platform_info = &ov7692_sensor_7627a_info, |
| .csi_if = 1, |
| }; |
| |
| static struct platform_device msm_camera_sensor_ov7692 = { |
| .name = "msm_camera_ov7692", |
| .dev = { |
| .platform_data = &msm_camera_sensor_ov7692_data, |
| }, |
| }; |
| #endif |
| |
| static struct i2c_board_info i2c_camera_devices[] = { |
| #ifdef CONFIG_S5K4E1 |
| { |
| I2C_BOARD_INFO("s5k4e1", 0x36), |
| }, |
| { |
| I2C_BOARD_INFO("s5k4e1_af", 0x8c >> 1), |
| }, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV9726 |
| { |
| I2C_BOARD_INFO("ov9726", 0x10), |
| }, |
| #endif |
| #ifdef CONFIG_IMX072 |
| { |
| I2C_BOARD_INFO("imx072", 0x34), |
| }, |
| #endif |
| #ifdef CONFIG_MT9E013 |
| { |
| I2C_BOARD_INFO("mt9e013", 0x6C >> 2), |
| }, |
| #endif |
| { |
| I2C_BOARD_INFO("sc628a", 0x6E), |
| }, |
| }; |
| |
| static struct i2c_board_info i2c_camera_devices_qrd[] = { |
| #ifdef CONFIG_OV5640 |
| { |
| I2C_BOARD_INFO("ov5640", 0x78 >> 1), |
| }, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV7692_QRD |
| { |
| I2C_BOARD_INFO("ov7692", 0x78), |
| }, |
| #endif |
| }; |
| |
| static struct i2c_board_info i2c_camera_devices_evb[] = { |
| #ifdef CONFIG_OV5647 |
| { |
| I2C_BOARD_INFO("ov5647", 0x36 << 1), |
| }, |
| { |
| I2C_BOARD_INFO("ov5647_af", 0x18 >> 1), |
| }, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV7692_QRD |
| { |
| I2C_BOARD_INFO("ov7692", 0x78), |
| }, |
| #endif |
| }; |
| |
| static struct platform_device *camera_devices_msm[] __initdata = { |
| #ifdef CONFIG_S5K4E1 |
| &msm_camera_sensor_s5k4e1, |
| #endif |
| #ifdef CONFIG_IMX072 |
| &msm_camera_sensor_imx072, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV9726 |
| &msm_camera_sensor_ov9726, |
| #endif |
| #ifdef CONFIG_MT9E013 |
| &msm_camera_sensor_mt9e013, |
| #endif |
| }; |
| |
| static struct platform_device *camera_devices_qrd[] __initdata = { |
| #ifdef CONFIG_OV5640 |
| &msm_camera_sensor_ov5640, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV7692_QRD |
| &msm_camera_sensor_ov7692, |
| #endif |
| }; |
| |
| static struct platform_device *camera_devices_evb[] __initdata = { |
| #ifdef CONFIG_OV5647 |
| &msm_camera_sensor_ov5647, |
| #endif |
| #ifdef CONFIG_WEBCAM_OV7692_QRD |
| &msm_camera_sensor_ov7692, |
| #endif |
| }; |
| #endif |
| |
| enum { |
| SX150X_CAM, |
| }; |
| |
| static struct sx150x_platform_data sx150x_data[] __initdata = { |
| [SX150X_CAM] = { |
| .gpio_base = GPIO_CAM_EXPANDER_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0, |
| .io_pulldn_ena = 0, |
| .io_open_drain_ena = 0x23, |
| .irq_summary = -1, |
| }, |
| }; |
| |
| static struct i2c_board_info cam_exp_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("sx1508q", 0x22), |
| .platform_data = &sx150x_data[SX150X_CAM], |
| }, |
| }; |
| |
| static void __init register_i2c_devices(void) |
| { |
| i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, |
| cam_exp_i2c_info, |
| ARRAY_SIZE(cam_exp_i2c_info)); |
| } |
| |
| #define LCD_CAMERA_LDO_2V8 35 /* SKU1&SKU3 2.8V LDO */ |
| #define SKU3_LCD_CAMERA_LDO_1V8 40 /* SKU3 1.8V LDO */ |
| |
| static int lcd_camera_ldo_1v8 = SKU3_LCD_CAMERA_LDO_1V8; |
| |
| static void lcd_camera_power_init(void) |
| { |
| int rc = 0; |
| |
| pr_debug("lcd_camera_power_init\n"); |
| |
| lcd_camera_ldo_1v8 = SKU3_LCD_CAMERA_LDO_1V8; /* SKU3 PVT */ |
| |
| /* LDO_EXT2V8 */ |
| if (gpio_request(LCD_CAMERA_LDO_2V8, "lcd_camera_ldo_2v8")) { |
| pr_err("failed to request gpio lcd_camera_ldo_2v8\n"); |
| return; |
| } |
| |
| rc = gpio_tlmm_config(GPIO_CFG(LCD_CAMERA_LDO_2V8, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s: unable to enable lcd_camera_ldo_2v8!\n", __func__); |
| goto fail_gpio2; |
| } |
| |
| /* LDO_EVT1V8 */ |
| if (gpio_request(lcd_camera_ldo_1v8, "lcd_camera_ldo_1v8")) { |
| pr_err("failed to request gpio lcd_camera_ldo_1v8\n"); |
| goto fail_gpio2; |
| } |
| |
| rc = gpio_tlmm_config(GPIO_CFG(lcd_camera_ldo_1v8, 0, |
| GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, |
| GPIO_CFG_2MA), GPIO_CFG_ENABLE); |
| if (rc < 0) { |
| pr_err("%s: unable to enable lcd_camera_ldo_1v8!\n", __func__); |
| goto fail_gpio1; |
| } |
| |
| return; |
| |
| fail_gpio1: |
| gpio_free(lcd_camera_ldo_1v8); |
| fail_gpio2: |
| gpio_free(LCD_CAMERA_LDO_2V8); |
| |
| return; |
| } |
| |
| static int lcd_camera_power_on_sku3(void) |
| { |
| int rc = 0; |
| |
| pr_debug("turn on sku3 lcd_camera_ldo_1v8\n"); |
| gpio_set_value_cansleep(lcd_camera_ldo_1v8, 1); |
| |
| pr_debug("turn on sku3 lcd_camera_ldo\n"); |
| gpio_set_value_cansleep(LCD_CAMERA_LDO_2V8, 1); |
| |
| return rc; |
| } |
| |
| static int lcd_camera_power_off_sku3(void) |
| { |
| int rc = 0; |
| |
| pr_debug("turn off sku3 lcd_camera_ldo_1v8\n"); |
| gpio_set_value_cansleep(lcd_camera_ldo_1v8, 0); |
| |
| pr_debug("turn off sku3 lcd_camera_ldo\n"); |
| gpio_set_value_cansleep(LCD_CAMERA_LDO_2V8, 0); |
| |
| gpio_free(lcd_camera_ldo_1v8); |
| gpio_free(LCD_CAMERA_LDO_2V8); |
| |
| return rc; |
| } |
| |
| int lcd_camera_power_onoff(int on) |
| { |
| int rc = 0; |
| |
| pr_debug("lcd_camera_power_onoff on = %d,\n", on); |
| |
| if (on) |
| rc = lcd_camera_power_on_sku3(); |
| else |
| rc = lcd_camera_power_off_sku3(); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL(lcd_camera_power_onoff); |
| |
| |
| void __init msm7627a_camera_init(void) |
| { |
| int rc; |
| |
| pr_debug("msm7627a_camera_init Entered\n"); |
| /* LCD and camera power (VREG & LDO) init */ |
| if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()) |
| lcd_camera_power_init(); |
| |
| #ifndef CONFIG_MSM_CAMERA_V4L2 |
| if (machine_is_msm7627a_qrd1()) { |
| qrd1_camera_gpio_cfg(); |
| platform_add_devices(camera_devices_qrd, |
| ARRAY_SIZE(camera_devices_qrd)); |
| } else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()) { |
| evb_camera_gpio_cfg(); |
| platform_add_devices(camera_devices_evb, |
| ARRAY_SIZE(camera_devices_evb)); |
| } else if (machine_is_msm7627a_qrd3()) |
| return; |
| else |
| platform_add_devices(camera_devices_msm, |
| ARRAY_SIZE(camera_devices_msm)); |
| #endif |
| if (!machine_is_msm7627a_qrd1() || !machine_is_msm7627a_evb() |
| || !machine_is_msm8625_evb()) |
| register_i2c_devices(); |
| rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera); |
| |
| if (rc) { |
| pr_err("%s: could not get regulators: %d\n", __func__, rc); |
| return; |
| } |
| |
| rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera); |
| |
| if (rc) { |
| pr_err("%s: could not set voltages: %d\n", __func__, rc); |
| return; |
| } |
| |
| #if defined(CONFIG_MSM_CAMERA_V4L2) |
| msm7x27a_init_cam(); |
| #endif |
| #ifndef CONFIG_MSM_CAMERA_V4L2 |
| if (machine_is_msm7627a_qrd1()) { |
| i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, |
| i2c_camera_devices_qrd, |
| ARRAY_SIZE(i2c_camera_devices_qrd)); |
| } else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()) { |
| pr_debug("machine_is_msm7627a_evb i2c_register_board_info\n"); |
| i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, |
| i2c_camera_devices_evb, |
| ARRAY_SIZE(i2c_camera_devices_evb)); |
| } else |
| #endif |
| i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, |
| i2c_camera_devices, |
| ARRAY_SIZE(i2c_camera_devices)); |
| } |