| /* |
| * Copyright (C) 2002 ARM Ltd. |
| * All Rights Reserved |
| * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/cpumask.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/regulator/krait-regulator.h> |
| |
| #include <asm/hardware/gic.h> |
| #include <asm/cacheflush.h> |
| #include <asm/cputype.h> |
| #include <asm/mach-types.h> |
| #include <asm/smp_plat.h> |
| |
| #include <mach/socinfo.h> |
| #include <mach/hardware.h> |
| #include <mach/msm_iomap.h> |
| |
| #include "pm.h" |
| #include "platsmp.h" |
| #include "scm-boot.h" |
| #include "spm.h" |
| |
| #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 |
| #define SCSS_CPU1CORE_RESET 0xD80 |
| #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 |
| #define BOOT_REMAP_ENABLE 0x01 |
| |
| /* |
| * control for which core is the next to come out of the secondary |
| * boot "holding pen". |
| */ |
| volatile int pen_release = -1; |
| |
| /* |
| * Write pen_release in a way that is guaranteed to be visible to all |
| * observers, irrespective of whether they're taking part in coherency |
| * or not. This is necessary for the hotplug code to work reliably. |
| */ |
| void __cpuinit write_pen_release(int val) |
| { |
| pen_release = val; |
| smp_wmb(); |
| __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); |
| outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); |
| } |
| |
| static DEFINE_SPINLOCK(boot_lock); |
| |
| void __cpuinit platform_secondary_init(unsigned int cpu) |
| { |
| WARN_ON(msm_platform_secondary_init(cpu)); |
| |
| /* |
| * if any interrupts are already enabled for the primary |
| * core (e.g. timer irq), then they will not have been enabled |
| * for us: do so |
| */ |
| gic_secondary_init(0); |
| |
| /* |
| * let the primary processor know we're out of the |
| * pen, then head off into the C entry point |
| */ |
| write_pen_release(-1); |
| |
| /* |
| * Synchronise with the boot thread. |
| */ |
| spin_lock(&boot_lock); |
| spin_unlock(&boot_lock); |
| } |
| |
| static int __cpuinit release_secondary_sim(unsigned long base, int cpu) |
| { |
| void *base_ptr = ioremap_nocache(base + (cpu * 0x10000), SZ_4K); |
| if (!base_ptr) |
| return -ENODEV; |
| |
| writel_relaxed(0x800, base_ptr+0x04); |
| writel_relaxed(0x3FFF, base_ptr+0x14); |
| |
| mb(); |
| iounmap(base_ptr); |
| return 0; |
| } |
| |
| static int __cpuinit scorpion_release_secondary(void) |
| { |
| void *base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); |
| if (!base_ptr) |
| return -EINVAL; |
| |
| writel_relaxed(0, base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); |
| dmb(); |
| writel_relaxed(0, base_ptr + SCSS_CPU1CORE_RESET); |
| writel_relaxed(3, base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP); |
| mb(); |
| iounmap(base_ptr); |
| |
| return 0; |
| } |
| |
| static int __cpuinit msm8960_release_secondary(unsigned long base, int cpu) |
| { |
| void *base_ptr = ioremap_nocache(base + (cpu * 0x10000), SZ_4K); |
| if (!base_ptr) |
| return -ENODEV; |
| |
| msm_spm_turn_on_cpu_rail(cpu); |
| |
| writel_relaxed(0x109, base_ptr+0x04); |
| writel_relaxed(0x101, base_ptr+0x04); |
| mb(); |
| ndelay(300); |
| |
| writel_relaxed(0x121, base_ptr+0x04); |
| mb(); |
| udelay(2); |
| |
| writel_relaxed(0x120, base_ptr+0x04); |
| mb(); |
| udelay(2); |
| |
| writel_relaxed(0x100, base_ptr+0x04); |
| mb(); |
| udelay(100); |
| |
| writel_relaxed(0x180, base_ptr+0x04); |
| mb(); |
| iounmap(base_ptr); |
| return 0; |
| } |
| |
| static int __cpuinit msm8974_release_secondary(unsigned long base, int cpu) |
| { |
| void *base_ptr = ioremap_nocache(base + (cpu * 0x10000), SZ_4K); |
| if (!base_ptr) |
| return -ENODEV; |
| |
| secondary_cpu_hs_init(base_ptr); |
| |
| writel_relaxed(0x021, base_ptr+0x04); |
| mb(); |
| udelay(2); |
| |
| writel_relaxed(0x020, base_ptr+0x04); |
| mb(); |
| udelay(2); |
| |
| writel_relaxed(0x000, base_ptr+0x04); |
| mb(); |
| |
| writel_relaxed(0x080, base_ptr+0x04); |
| mb(); |
| iounmap(base_ptr); |
| return 0; |
| } |
| |
| static int __cpuinit release_from_pen(unsigned int cpu) |
| { |
| unsigned long timeout; |
| |
| /* Set preset_lpj to avoid subsequent lpj recalculations */ |
| preset_lpj = loops_per_jiffy; |
| |
| /* |
| * set synchronisation state between this boot processor |
| * and the secondary one |
| */ |
| spin_lock(&boot_lock); |
| |
| /* |
| * The secondary processor is waiting to be released from |
| * the holding pen - release it, then wait for it to flag |
| * that it has been released by resetting pen_release. |
| * |
| * Note that "pen_release" is the hardware CPU ID, whereas |
| * "cpu" is Linux's internal ID. |
| */ |
| write_pen_release(cpu_logical_map(cpu)); |
| |
| /* |
| * Send the secondary CPU a soft interrupt, thereby causing |
| * the boot monitor to read the system wide flags register, |
| * and branch to the address found there. |
| */ |
| gic_raise_softirq(cpumask_of(cpu), 1); |
| |
| timeout = jiffies + (1 * HZ); |
| while (time_before(jiffies, timeout)) { |
| smp_rmb(); |
| if (pen_release == -1) |
| break; |
| |
| udelay(10); |
| } |
| |
| /* |
| * now the secondary core is starting up let it run its |
| * calibrations, then wait for it to finish |
| */ |
| spin_unlock(&boot_lock); |
| |
| return pen_release != -1 ? -ENOSYS : 0; |
| } |
| |
| DEFINE_PER_CPU(int, cold_boot_done); |
| |
| int __cpuinit scorpion_boot_secondary(unsigned int cpu, |
| struct task_struct *idle) |
| { |
| pr_debug("Starting secondary CPU %d\n", cpu); |
| |
| if (per_cpu(cold_boot_done, cpu) == false) { |
| scorpion_release_secondary(); |
| per_cpu(cold_boot_done, cpu) = true; |
| } |
| return release_from_pen(cpu); |
| } |
| |
| int __cpuinit msm8960_boot_secondary(unsigned int cpu, struct task_struct *idle) |
| { |
| pr_debug("Starting secondary CPU %d\n", cpu); |
| |
| if (per_cpu(cold_boot_done, cpu) == false) { |
| msm8960_release_secondary(0x02088000, cpu); |
| per_cpu(cold_boot_done, cpu) = true; |
| } |
| return release_from_pen(cpu); |
| } |
| |
| int __cpuinit msm8974_boot_secondary(unsigned int cpu, struct task_struct *idle) |
| { |
| pr_debug("Starting secondary CPU %d\n", cpu); |
| |
| if (per_cpu(cold_boot_done, cpu) == false) { |
| if (machine_is_msm8974_sim() || machine_is_mpq8092_sim()) |
| release_secondary_sim(0xf9088000, cpu); |
| else if (machine_is_msm8974_rumi()) |
| return 0; |
| else |
| msm8974_release_secondary(0xf9088000, cpu); |
| |
| per_cpu(cold_boot_done, cpu) = true; |
| } |
| return release_from_pen(cpu); |
| } |
| |
| int __cpuinit arm_boot_secondary(unsigned int cpu, struct task_struct *idle) |
| { |
| pr_debug("Starting secondary CPU %d\n", cpu); |
| |
| if (per_cpu(cold_boot_done, cpu) == false) { |
| if (machine_is_msm8226_sim() || machine_is_msm8610_sim()) |
| release_secondary_sim(0xf9088000, cpu); |
| |
| per_cpu(cold_boot_done, cpu) = true; |
| } |
| return release_from_pen(cpu); |
| } |
| |
| /* |
| * Initialise the CPU possible map early - this describes the CPUs |
| * which may be present or become present in the system. |
| */ |
| static void __init msm_smp_init_cpus(void) |
| { |
| unsigned int i, ncores = get_core_count(); |
| |
| if (ncores > nr_cpu_ids) { |
| pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", |
| ncores, nr_cpu_ids); |
| ncores = nr_cpu_ids; |
| } |
| |
| for (i = 0; i < ncores; i++) |
| set_cpu_possible(i, true); |
| |
| set_smp_cross_call(gic_raise_softirq); |
| } |
| |
| static void __init arm_smp_init_cpus(void) |
| { |
| unsigned int i, ncores; |
| |
| ncores = (__raw_readl(MSM_APCS_GCC_BASE + 0x30)) & 0xF; |
| |
| if (ncores > nr_cpu_ids) { |
| pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", |
| ncores, nr_cpu_ids); |
| ncores = nr_cpu_ids; |
| } |
| |
| for (i = 0; i < ncores; i++) |
| set_cpu_possible(i, true); |
| |
| set_smp_cross_call(gic_raise_softirq); |
| } |
| |
| static int cold_boot_flags[] __initdata = { |
| 0, |
| SCM_FLAG_COLDBOOT_CPU1, |
| SCM_FLAG_COLDBOOT_CPU2, |
| SCM_FLAG_COLDBOOT_CPU3, |
| }; |
| |
| static void __init msm_platform_smp_prepare_cpus(unsigned int max_cpus) |
| { |
| int cpu, map; |
| unsigned int flags = 0; |
| |
| for_each_present_cpu(cpu) { |
| map = cpu_logical_map(cpu); |
| if (map > ARRAY_SIZE(cold_boot_flags)) { |
| set_cpu_present(cpu, false); |
| __WARN(); |
| continue; |
| } |
| flags |= cold_boot_flags[map]; |
| } |
| |
| if (scm_set_boot_addr(virt_to_phys(msm_secondary_startup), flags)) |
| pr_warn("Failed to set CPU boot address\n"); |
| } |
| |
| static void __init arm_platform_smp_prepare_cpus(unsigned int max_cpus) |
| { |
| void *remap_ptr = ioremap_nocache(0xF9010000, SZ_4K); |
| if (!remap_ptr) { |
| pr_err("Failed to ioremap for secondary cores\n"); |
| return; |
| } |
| |
| /* |
| * Write the address of secondary startup into boot remapper |
| * register and enable boot remapping. |
| */ |
| __raw_writel((virt_to_phys(msm_secondary_startup)|BOOT_REMAP_ENABLE), |
| (remap_ptr + 0x4)); |
| mb(); |
| iounmap(remap_ptr); |
| } |
| |
| struct smp_operations arm_smp_ops __initdata = { |
| .smp_init_cpus = arm_smp_init_cpus, |
| .smp_prepare_cpus = arm_platform_smp_prepare_cpus, |
| .smp_secondary_init = platform_secondary_init, |
| .smp_boot_secondary = arm_boot_secondary, |
| .cpu_kill = platform_cpu_kill, |
| .cpu_die = platform_cpu_die, |
| .cpu_disable = platform_cpu_disable |
| }; |
| |
| struct smp_operations msm8974_smp_ops __initdata = { |
| .smp_init_cpus = msm_smp_init_cpus, |
| .smp_prepare_cpus = msm_platform_smp_prepare_cpus, |
| .smp_secondary_init = platform_secondary_init, |
| .smp_boot_secondary = msm8974_boot_secondary, |
| .cpu_kill = platform_cpu_kill, |
| .cpu_die = platform_cpu_die, |
| .cpu_disable = platform_cpu_disable |
| }; |
| |
| struct smp_operations msm8960_smp_ops __initdata = { |
| .smp_init_cpus = msm_smp_init_cpus, |
| .smp_prepare_cpus = msm_platform_smp_prepare_cpus, |
| .smp_secondary_init = platform_secondary_init, |
| .smp_boot_secondary = msm8960_boot_secondary, |
| .cpu_kill = platform_cpu_kill, |
| .cpu_die = platform_cpu_die, |
| .cpu_disable = platform_cpu_disable |
| }; |
| |
| struct smp_operations scorpion_smp_ops __initdata = { |
| .smp_init_cpus = msm_smp_init_cpus, |
| .smp_prepare_cpus = msm_platform_smp_prepare_cpus, |
| .smp_secondary_init = platform_secondary_init, |
| .smp_boot_secondary = scorpion_boot_secondary, |
| .cpu_kill = platform_cpu_kill, |
| .cpu_die = platform_cpu_die, |
| .cpu_disable = platform_cpu_disable |
| }; |