blob: bdcab779d5d1bfaf01d74d99cddab02e04448615 [file] [log] [blame]
/*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&i2c {
led_flash0: qcom,led-flash@60 {
cell-index = <0>;
reg = <0x60>;
qcom,slave-id = <0x60 0x00 0x0011>;
compatible = "qcom,led-flash";
qcom,flash-name = "adp1600";
qcom,flash-type = <1>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 18 0>,
<&msmgpio 19 0>;
qcom,gpio-flash-en = <0>;
qcom,gpio-flash-now = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <0 0>;
qcom,gpio-req-tbl-label = "FLASH_EN",
"FLASH_NOW";
};
actuator0: qcom,actuator@6e {
cell-index = <3>;
reg = <0x6c>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
};
eeprom0: qcom,eeprom@6a {
cell-index = <0>;
reg = <0x6a 0x0>;
qcom,eeprom-name = "truly_cm7700";
compatible = "qcom,msm_eeprom";
qcom,slave-addr = <0x6c>;
qcom,num-blocks = <9>;
qcom,page0 = <1 0x0100 2 0x01 1 1>;
qcom,poll0 = <0 0x0 2 0 1 1>;
qcom,mem0 = <0 0x0 2 0 1 0>;
qcom,page1 = <1 0x3d84 2 0x8 1 1>;
qcom,pageen1 = <1 0x3d81 2 0x01 1 10>;
qcom,poll1 = <0 0x0 2 0 1 1>;
qcom,mem1 = <32 0x3d00 2 0 1 0>;
qcom,page2 = <1 0x3d84 2 0x9 1 1>;
qcom,pageen2 = <1 0x3d81 2 0x01 1 10>;
qcom,poll2 = <0 0x0 2 0 1 1>;
qcom,mem2 = <32 0x3d00 2 0 1 0>;
qcom,page3 = <1 0x3d84 2 0xa 1 1>;
qcom,pageen3 = <1 0x3d81 2 0x01 1 10>;
qcom,poll3 = <0 0x0 2 0 1 1>;
qcom,mem3 = <32 0x3d00 2 0 1 0>;
qcom,page4 = <1 0x3d84 2 0xb 1 1>;
qcom,pageen4 = <1 0x3d81 2 0x01 1 10>;
qcom,poll4 = <0 0x0 2 0 1 1>;
qcom,mem4 = <32 0x3d00 2 0 1 0>;
qcom,page5 = <1 0x3d84 2 0xc 1 1>;
qcom,pageen5 = <1 0x3d81 2 0x01 1 10>;
qcom,poll5 = <0 0x0 2 0 1 1>;
qcom,mem5 = <32 0x3d00 2 0 1 0>;
qcom,page6 = <1 0x3d84 2 0xd 1 1>;
qcom,pageen6 = <1 0x3d81 2 0x01 1 10>;
qcom,poll6 = <0 0x0 2 0 1 1>;
qcom,mem6 = <32 0x3d00 2 0 1 0>;
qcom,page7 = <1 0x3d84 2 0xe 1 1>;
qcom,pageen7 = <1 0x3d81 2 0x01 1 10>;
qcom,poll7 = <0 0x0 2 0 1 1>;
qcom,mem7 = <32 0x3d00 2 0 1 0>;
qcom,page8 = <1 0x3d84 2 0xf 1 1>;
qcom,pageen8 = <1 0x3d81 2 0x01 1 10>;
qcom,poll8 = <0 0x0 2 0 1 1>;
qcom,mem8 = <32 0x3d00 2 0 1 0>;
cam_vdig-supply = <&pm8110_l2>;
cam_vio-supply = <&pm8110_l14>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio";
qcom,cam-vreg-type = <0 0 0 0>;
qcom,cam-vreg-min-voltage = <1200000 1800000>;
qcom,cam-vreg-max-voltage = <1200000 1800000>;
qcom,cam-vreg-op-mode = <200000 8000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 13 0>,
<&msmgpio 21 0>,
<&msmgpio 20 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,cam-power-seq-type = "sensor_vreg",
"sensor_vreg", "sensor_clk",
"sensor_gpio", "sensor_gpio";
qcom,cam-power-seq-val = "cam_vdig",
"cam_vio", "sensor_cam_mclk",
"sensor_gpio_reset",
"sensor_gpio_standby";
qcom,cam-power-seq-cfg-val = <1 1 24000000 1 1>;
qcom,cam-power-seq-delay = <1 1 5 5 10>;
};
qcom,camera@6f {
compatible = "qcom,ov8825";
reg = <0x6f>;
qcom,slave-id = <0x6c 0x300a 0x8825>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,actuator-src = <&actuator0>;
qcom,led-flash-src = <&led_flash0>;
qcom,eeprom-src = <&eeprom0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "ov8825";
cam_vdig-supply = <&pm8110_l2>;
cam_vana-supply = <&pm8110_l19>;
cam_vio-supply = <&pm8110_l14>;
cam_vaf-supply = <&pm8110_l16>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 0 0 0>;
qcom,cam-vreg-min-voltage = <1200000 1800000 2850000 3000000>;
qcom,cam-vreg-max-voltage = <1200000 1800000 2850000 3000000>;
qcom,cam-vreg-op-mode = <200000 8000 80000 100000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 13 0>,
<&msmgpio 21 0>,
<&msmgpio 20 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,csi-lane-assign = <0xe4>;
qcom,csi-lane-mask = <0x3>;
qcom,sensor-position = <0>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
};
qcom,camera@34 {
compatible = "sne,imx134";
reg = <0x34>;
qcom,slave-id = <0x34 0x0016 0x0134>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,actuator-src = <&actuator0>;
qcom,led-flash-src = <&led_flash0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "imx134";
cam_vdig-supply = <&pm8110_l2>;
cam_vana-supply = <&pm8110_l19>;
cam_vio-supply = <&pm8110_l14>;
cam_vaf-supply = <&pm8110_l16>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 0 0 0>;
qcom,cam-vreg-min-voltage = <1200000 1800000 2850000 3000000>;
qcom,cam-vreg-max-voltage = <1200000 1800000 2850000 3000000>;
qcom,cam-vreg-op-mode = <200000 8000 80000 100000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 13 0>,
<&msmgpio 21 0>,
<&msmgpio 20 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,csi-lane-assign = <0xe4>;
qcom,csi-lane-mask = <0x3>;
qcom,sensor-position = <0>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
};
qcom,camera@6d {
compatible = "qcom,ov9724";
reg = <0x6d>;
qcom,slave-id = <0x20 0x0 0x9724>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "ov9724";
cam_vdig-supply = <&pm8110_l4>;
cam_vana-supply = <&pm8110_l19>;
cam_vio-supply = <&pm8110_l14>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-type = <0 1 0>;
qcom,cam-vreg-min-voltage = <1200000 0 2850000>;
qcom,cam-vreg-max-voltage = <1200000 0 2850000>;
qcom,cam-vreg-op-mode = <200000 0 80000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 14 0>,
<&msmgpio 15 0>,
<&msmgpio 8 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET",
"CAM_STANDBY";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 4000>;
qcom,csi-lane-assign = <0xe4>;
qcom,csi-lane-mask = <0x1>;
qcom,sensor-position = <1>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@78 {
compatible = "qcom,sp1628";
reg = <0x78>;
qcom,slave-id = <0x78 0x0 0x1628>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <90>;
qcom,sensor-name = "sp1628";
cam_vdig-supply = <&pm8110_l2>;
cam_vana-supply = <&pm8110_l19>;
cam_vio-supply = <&pm8110_l14>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-type = <0 0 0>;
qcom,cam-vreg-min-voltage = <1200000 1800000 2850000>;
qcom,cam-vreg-max-voltage = <1200000 1800000 2850000>;
qcom,cam-vreg-op-mode = <200000 80000 80000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 14 0>,
<&msmgpio 15 0>,
<&msmgpio 8 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET",
"CAM_STANDBY";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 4000>;
qcom,csi-lane-assign = <0xe4>;
qcom,csi-lane-mask = <0x3>;
qcom,sensor-position = <1>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
};
};