blob: 8b08ac9ff14e0204efc80c127827349c48e672f5 [file] [log] [blame]
/* drivers/input/touchscreen/gt9xx.c
*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* Linux Foundation chooses to take subject only to the GPLv2 license
* terms, and distributes only under these terms.
*
* 2010 - 2013 Goodix Technology.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be a reference
* to you, when you are integrating the GOODiX's CTP IC into your system,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* Version: 1.8
* Authors: andrew@goodix.com, meta@goodix.com
* Release Date: 2013/04/25
* Revision record:
* V1.0:
* first Release. By Andrew, 2012/08/31
* V1.2:
* modify gtp_reset_guitar,slot report,tracking_id & 0x0F.
* By Andrew, 2012/10/15
* V1.4:
* modify gt9xx_update.c. By Andrew, 2012/12/12
* V1.6:
* 1. new heartbeat/esd_protect mechanism(add external watchdog)
* 2. doze mode, sliding wakeup
* 3. 3 more cfg_group(GT9 Sensor_ID: 0~5)
* 3. config length verification
* 4. names & comments
* By Meta, 2013/03/11
* V1.8:
* 1. pen/stylus identification
* 2. read double check & fixed config support
* 2. new esd & slide wakeup optimization
* By Meta, 2013/06/08
*/
#include <linux/regulator/consumer.h>
#include "gt9xx.h"
#include <linux/of_gpio.h>
#include <linux/input/mt.h>
#define GOODIX_DEV_NAME "Goodix-CTP"
#define CFG_MAX_TOUCH_POINTS 5
#define GOODIX_COORDS_ARR_SIZE 4
#define MAX_BUTTONS 4
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
#define GTP_I2C_ADDRESS_HIGH 0x14
#define GTP_I2C_ADDRESS_LOW 0x5D
#define CFG_GROUP_LEN(p_cfg_grp) (sizeof(p_cfg_grp) / sizeof(p_cfg_grp[0]))
#define GOODIX_VTG_MIN_UV 2600000
#define GOODIX_VTG_MAX_UV 3300000
#define GOODIX_I2C_VTG_MIN_UV 1800000
#define GOODIX_I2C_VTG_MAX_UV 1800000
#define GOODIX_VDD_LOAD_MIN_UA 0
#define GOODIX_VDD_LOAD_MAX_UA 10000
#define GOODIX_VIO_LOAD_MIN_UA 0
#define GOODIX_VIO_LOAD_MAX_UA 10000
#define RESET_DELAY_T3_US 200 /* T3: > 100us */
#define RESET_DELAY_T4 20 /* T4: > 5ms */
#define PHY_BUF_SIZE 32
#define PROP_NAME_SIZE 24
#define GTP_MAX_TOUCH 5
#define GTP_ESD_CHECK_CIRCLE_MS 2000
#if GTP_HAVE_TOUCH_KEY
static const u16 touch_key_array[] = {KEY_MENU, KEY_HOMEPAGE, KEY_BACK};
#define GTP_MAX_KEY_NUM (sizeof(touch_key_array)/sizeof(touch_key_array[0]))
#if GTP_DEBUG_ON
static const int key_codes[] = {
KEY_HOME, KEY_BACK, KEY_MENU, KEY_SEARCH
};
static const char *const key_names[] = {
"Key_Home", "Key_Back", "Key_Menu", "Key_Search"
};
#endif
#endif
static void gtp_reset_guitar(struct goodix_ts_data *ts, int ms);
static void gtp_int_sync(struct goodix_ts_data *ts, int ms);
static int gtp_i2c_test(struct i2c_client *client);
#if defined(CONFIG_FB)
static int fb_notifier_callback(struct notifier_block *self,
unsigned long event, void *data);
#elif defined(CONFIG_HAS_EARLYSUSPEND)
static void goodix_ts_early_suspend(struct early_suspend *h);
static void goodix_ts_late_resume(struct early_suspend *h);
#endif
#if GTP_ESD_PROTECT
static struct delayed_work gtp_esd_check_work;
static struct workqueue_struct *gtp_esd_check_workqueue;
static void gtp_esd_check_func(struct work_struct *work);
static int gtp_init_ext_watchdog(struct i2c_client *client);
struct i2c_client *i2c_connect_client;
#endif
#if GTP_SLIDE_WAKEUP
enum doze_status {
DOZE_DISABLED = 0,
DOZE_ENABLED = 1,
DOZE_WAKEUP = 2,
};
static enum doze_status = DOZE_DISABLED;
static s8 gtp_enter_doze(struct goodix_ts_data *ts);
#endif
bool init_done;
static u8 chip_gt9xxs; /* true if ic is gt9xxs, like gt915s */
u8 grp_cfg_version;
/*******************************************************
Function:
Read data from the i2c slave device.
Input:
client: i2c device.
buf[0~1]: read start address.
buf[2~len-1]: read data buffer.
len: GTP_ADDR_LENGTH + read bytes count
Output:
numbers of i2c_msgs to transfer:
2: succeed, otherwise: failed
*********************************************************/
int gtp_i2c_read(struct i2c_client *client, u8 *buf, int len)
{
struct goodix_ts_data *ts = i2c_get_clientdata(client);
struct i2c_msg msgs[2];
int ret = -EIO;
int retries = 0;
msgs[0].flags = !I2C_M_RD;
msgs[0].addr = client->addr;
msgs[0].len = GTP_ADDR_LENGTH;
msgs[0].buf = &buf[0];
msgs[1].flags = I2C_M_RD;
msgs[1].addr = client->addr;
msgs[1].len = len - GTP_ADDR_LENGTH;
msgs[1].buf = &buf[GTP_ADDR_LENGTH];
while (retries < 5) {
ret = i2c_transfer(client->adapter, msgs, 2);
if (ret == 2)
break;
retries++;
}
if (retries >= 5) {
#if GTP_SLIDE_WAKEUP
/* reset chip would quit doze mode */
if (DOZE_ENABLED == doze_status)
return ret;
#endif
if (init_done)
gtp_reset_guitar(ts, 10);
else
dev_warn(&client->dev,
"<GTP> gtp_reset_guitar exit init_done=%d:\n",
init_done);
}
return ret;
}
/*******************************************************
Function:
Write data to the i2c slave device.
Input:
client: i2c device.
buf[0~1]: write start address.
buf[2~len-1]: data buffer
len: GTP_ADDR_LENGTH + write bytes count
Output:
numbers of i2c_msgs to transfer:
1: succeed, otherwise: failed
*********************************************************/
int gtp_i2c_write(struct i2c_client *client, u8 *buf, int len)
{
struct goodix_ts_data *ts = i2c_get_clientdata(client);
struct i2c_msg msg;
int ret = -EIO;
int retries = 0;
msg.flags = !I2C_M_RD;
msg.addr = client->addr;
msg.len = len;
msg.buf = buf;
while (retries < 5) {
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret == 1)
break;
retries++;
}
if ((retries >= 5)) {
#if GTP_SLIDE_WAKEUP
if (DOZE_ENABLED == doze_status)
return ret;
#endif
if (init_done)
gtp_reset_guitar(ts, 10);
else
dev_warn(&client->dev,
"<GTP> gtp_reset_guitar exit init_done=%d:\n",
init_done);
}
return ret;
}
/*******************************************************
Function:
i2c read twice, compare the results
Input:
client: i2c device
addr: operate address
rxbuf: read data to store, if compare successful
len: bytes to read
Output:
FAIL: read failed
SUCCESS: read successful
*********************************************************/
int gtp_i2c_read_dbl_check(struct i2c_client *client,
u16 addr, u8 *rxbuf, int len)
{
u8 buf[16] = {0};
u8 confirm_buf[16] = {0};
u8 retry = 0;
while (retry++ < 3) {
memset(buf, 0xAA, 16);
buf[0] = (u8)(addr >> 8);
buf[1] = (u8)(addr & 0xFF);
gtp_i2c_read(client, buf, len + 2);
memset(confirm_buf, 0xAB, 16);
confirm_buf[0] = (u8)(addr >> 8);
confirm_buf[1] = (u8)(addr & 0xFF);
gtp_i2c_read(client, confirm_buf, len + 2);
if (!memcmp(buf, confirm_buf, len + 2))
break;
}
if (retry < 3) {
memcpy(rxbuf, confirm_buf + 2, len);
return SUCCESS;
} else {
dev_err(&client->dev,
"i2c read 0x%04X, %d bytes, double check failed!",
addr, len);
return FAIL;
}
}
/*******************************************************
Function:
Send config data.
Input:
client: i2c device.
Output:
result of i2c write operation.
> 0: succeed, otherwise: failed
*********************************************************/
static int gtp_send_cfg(struct goodix_ts_data *ts)
{
int ret;
#if GTP_DRIVER_SEND_CFG
int retry = 0;
if (ts->fixed_cfg) {
dev_dbg(&ts->client->dev,
"Ic fixed config, no config sent!");
ret = 2;
} else {
for (retry = 0; retry < 5; retry++) {
ret = gtp_i2c_write(ts->client,
ts->config_data,
GTP_CONFIG_MAX_LENGTH + GTP_ADDR_LENGTH);
if (ret > 0)
break;
}
}
#endif
return ret;
}
/*******************************************************
Function:
Disable irq function
Input:
ts: goodix i2c_client private data
Output:
None.
*********************************************************/
void gtp_irq_disable(struct goodix_ts_data *ts)
{
unsigned long irqflags;
spin_lock_irqsave(&ts->irq_lock, irqflags);
if (!ts->irq_is_disabled) {
ts->irq_is_disabled = true;
disable_irq_nosync(ts->client->irq);
}
spin_unlock_irqrestore(&ts->irq_lock, irqflags);
}
/*******************************************************
Function:
Enable irq function
Input:
ts: goodix i2c_client private data
Output:
None.
*********************************************************/
void gtp_irq_enable(struct goodix_ts_data *ts)
{
unsigned long irqflags = 0;
spin_lock_irqsave(&ts->irq_lock, irqflags);
if (ts->irq_is_disabled) {
enable_irq(ts->client->irq);
ts->irq_is_disabled = false;
}
spin_unlock_irqrestore(&ts->irq_lock, irqflags);
}
/*******************************************************
Function:
Report touch point event
Input:
ts: goodix i2c_client private data
id: trackId
x: input x coordinate
y: input y coordinate
w: input pressure
Output:
None.
*********************************************************/
static void gtp_touch_down(struct goodix_ts_data *ts, int id, int x, int y,
int w)
{
#if GTP_CHANGE_X2Y
swap(x, y);
#endif
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x);
input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y);
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, w);
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, w);
}
/*******************************************************
Function:
Report touch release event
Input:
ts: goodix i2c_client private data
Output:
None.
*********************************************************/
static void gtp_touch_up(struct goodix_ts_data *ts, int id)
{
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, false);
}
/*******************************************************
Function:
Goodix touchscreen work function
Input:
work: work struct of goodix_workqueue
Output:
None.
*********************************************************/
static void goodix_ts_work_func(struct work_struct *work)
{
u8 end_cmd[3] = { GTP_READ_COOR_ADDR >> 8,
GTP_READ_COOR_ADDR & 0xFF, 0};
u8 point_data[2 + 1 + 8 * GTP_MAX_TOUCH + 1] = {
GTP_READ_COOR_ADDR >> 8,
GTP_READ_COOR_ADDR & 0xFF};
u8 touch_num = 0;
u8 finger = 0;
static u16 pre_touch;
static u8 pre_key;
#if GTP_WITH_PEN
static u8 pre_pen;
#endif
u8 key_value = 0;
u8 *coor_data = NULL;
s32 input_x = 0;
s32 input_y = 0;
s32 input_w = 0;
s32 id = 0;
s32 i = 0;
int ret = -1;
struct goodix_ts_data *ts = NULL;
#if GTP_SLIDE_WAKEUP
u8 doze_buf[3] = {0x81, 0x4B};
#endif
ts = container_of(work, struct goodix_ts_data, work);
#ifdef CONFIG_GT9XX_TOUCHPANEL_UPDATE
if (ts->enter_update)
return;
#endif
#if GTP_SLIDE_WAKEUP
if (DOZE_ENABLED == doze_status) {
ret = gtp_i2c_read(ts->client, doze_buf, 3);
if (ret > 0) {
if (doze_buf[2] == 0xAA) {
dev_dbg(&ts->client->dev,
"Slide(0xAA) To Light up the screen!");
doze_status = DOZE_WAKEUP;
input_report_key(
ts->input_dev, KEY_POWER, 1);
input_sync(ts->input_dev);
input_report_key(
ts->input_dev, KEY_POWER, 0);
input_sync(ts->input_dev);
/* clear 0x814B */
doze_buf[2] = 0x00;
gtp_i2c_write(ts->client, doze_buf, 3);
} else if (doze_buf[2] == 0xBB) {
dev_dbg(&ts->client->dev,
"Slide(0xBB) To Light up the screen!");
doze_status = DOZE_WAKEUP;
input_report_key(ts->input_dev, KEY_POWER, 1);
input_sync(ts->input_dev);
input_report_key(ts->input_dev, KEY_POWER, 0);
input_sync(ts->input_dev);
/* clear 0x814B*/
doze_buf[2] = 0x00;
gtp_i2c_write(ts->client, doze_buf, 3);
} else if (0xC0 == (doze_buf[2] & 0xC0)) {
dev_dbg(&ts->client->dev,
"double click to light up the screen!");
doze_status = DOZE_WAKEUP;
input_report_key(ts->input_dev, KEY_POWER, 1);
input_sync(ts->input_dev);
input_report_key(ts->input_dev, KEY_POWER, 0);
input_sync(ts->input_dev);
/* clear 0x814B */
doze_buf[2] = 0x00;
gtp_i2c_write(ts->client, doze_buf, 3);
} else {
gtp_enter_doze(ts);
}
}
if (ts->use_irq)
gtp_irq_enable(ts);
return;
}
#endif
ret = gtp_i2c_read(ts->client, point_data, 12);
if (ret < 0) {
dev_err(&ts->client->dev,
"I2C transfer error. errno:%d\n ", ret);
goto exit_work_func;
}
finger = point_data[GTP_ADDR_LENGTH];
if ((finger & 0x80) == 0)
goto exit_work_func;
touch_num = finger & 0x0f;
if (touch_num > GTP_MAX_TOUCH)
goto exit_work_func;
if (touch_num > 1) {
u8 buf[8 * GTP_MAX_TOUCH] = { (GTP_READ_COOR_ADDR + 10) >> 8,
(GTP_READ_COOR_ADDR + 10) & 0xff };
ret = gtp_i2c_read(ts->client, buf,
2 + 8 * (touch_num - 1));
memcpy(&point_data[12], &buf[2], 8 * (touch_num - 1));
}
#if GTP_HAVE_TOUCH_KEY
key_value = point_data[3 + 8 * touch_num];
if (key_value || pre_key) {
for (i = 0; i < GTP_MAX_KEY_NUM; i++) {
#if GTP_DEBUG_ON
for (ret = 0; ret < 4; ++ret) {
if (key_codes[ret] == touch_key_array[i]) {
GTP_DEBUG("Key: %s %s",
key_names[ret],
(key_value & (0x01 << i))
? "Down" : "Up");
break;
}
}
#endif
input_report_key(ts->input_dev,
touch_key_array[i], key_value & (0x01<<i));
}
touch_num = 0;
pre_touch = 0;
}
#endif
pre_key = key_value;
#if GTP_WITH_PEN
if (pre_pen && (touch_num == 0)) {
dev_dbg(&ts->client->dev, "Pen touch UP(Slot)!");
input_report_key(ts->input_dev, BTN_TOOL_PEN, 0);
input_mt_slot(ts->input_dev, 5);
input_report_abs(ts->input_dev, ABS_MT_TRACKING_ID, -1);
pre_pen = 0;
}
#endif
if (pre_touch || touch_num) {
s32 pos = 0;
u16 touch_index = 0;
coor_data = &point_data[3];
if (touch_num) {
id = coor_data[pos] & 0x0F;
#if GTP_WITH_PEN
id = coor_data[pos];
if (id == 128) {
dev_dbg(&ts->client->dev,
"Pen touch DOWN(Slot)!");
input_x = coor_data[pos + 1]
| (coor_data[pos + 2] << 8);
input_y = coor_data[pos + 3]
| (coor_data[pos + 4] << 8);
input_w = coor_data[pos + 5]
| (coor_data[pos + 6] << 8);
input_report_key(ts->input_dev,
BTN_TOOL_PEN, 1);
input_mt_slot(ts->input_dev, 5);
input_report_abs(ts->input_dev,
ABS_MT_TRACKING_ID, 5);
input_report_abs(ts->input_dev,
ABS_MT_POSITION_X, input_x);
input_report_abs(ts->input_dev,
ABS_MT_POSITION_Y, input_y);
input_report_abs(ts->input_dev,
ABS_MT_TOUCH_MAJOR, input_w);
dev_dbg(&ts->client->dev,
"Pen/Stylus: (%d, %d)[%d]",
input_x, input_y, input_w);
pre_pen = 1;
pre_touch = 0;
}
#endif
touch_index |= (0x01<<id);
}
for (i = 0; i < GTP_MAX_TOUCH; i++) {
#if GTP_WITH_PEN
if (pre_pen == 1)
break;
#endif
if (touch_index & (0x01<<i)) {
input_x = coor_data[pos + 1] |
coor_data[pos + 2] << 8;
input_y = coor_data[pos + 3] |
coor_data[pos + 4] << 8;
input_w = coor_data[pos + 5] |
coor_data[pos + 6] << 8;
gtp_touch_down(ts, id,
input_x, input_y, input_w);
pre_touch |= 0x01 << i;
pos += 8;
id = coor_data[pos] & 0x0F;
touch_index |= (0x01<<id);
} else {
gtp_touch_up(ts, i);
pre_touch &= ~(0x01 << i);
}
}
}
input_sync(ts->input_dev);
exit_work_func:
if (!ts->gtp_rawdiff_mode) {
ret = gtp_i2c_write(ts->client, end_cmd, 3);
if (ret < 0)
dev_warn(&ts->client->dev, "I2C write end_cmd error!\n");
}
if (ts->use_irq)
gtp_irq_enable(ts);
return;
}
/*******************************************************
Function:
Timer interrupt service routine for polling mode.
Input:
timer: timer struct pointer
Output:
Timer work mode.
HRTIMER_NORESTART: no restart mode
*********************************************************/
static enum hrtimer_restart goodix_ts_timer_handler(struct hrtimer *timer)
{
struct goodix_ts_data
*ts = container_of(timer, struct goodix_ts_data, timer);
queue_work(ts->goodix_wq, &ts->work);
hrtimer_start(&ts->timer, ktime_set(0, (GTP_POLL_TIME + 6) * 1000000),
HRTIMER_MODE_REL);
return HRTIMER_NORESTART;
}
/*******************************************************
Function:
External interrupt service routine for interrupt mode.
Input:
irq: interrupt number.
dev_id: private data pointer
Output:
Handle Result.
IRQ_HANDLED: interrupt handled successfully
*********************************************************/
static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
{
struct goodix_ts_data *ts = dev_id;
gtp_irq_disable(ts);
queue_work(ts->goodix_wq, &ts->work);
return IRQ_HANDLED;
}
/*******************************************************
Function:
Synchronization.
Input:
ms: synchronization time in millisecond.
Output:
None.
*******************************************************/
void gtp_int_sync(struct goodix_ts_data *ts, int ms)
{
gpio_direction_output(ts->pdata->irq_gpio, 0);
msleep(ms);
gpio_direction_input(ts->pdata->irq_gpio);
}
/*******************************************************
Function:
Reset chip.
Input:
ms: reset time in millisecond, must >10ms
Output:
None.
*******************************************************/
static void gtp_reset_guitar(struct goodix_ts_data *ts, int ms)
{
/* This reset sequence will selcet I2C slave address */
gpio_direction_output(ts->pdata->reset_gpio, 0);
msleep(ms);
if (ts->client->addr == GTP_I2C_ADDRESS_HIGH)
gpio_direction_output(ts->pdata->irq_gpio, 1);
else
gpio_direction_output(ts->pdata->irq_gpio, 0);
usleep(RESET_DELAY_T3_US);
gpio_direction_output(ts->pdata->reset_gpio, 1);
msleep(RESET_DELAY_T4);
gpio_direction_input(ts->pdata->reset_gpio);
gtp_int_sync(ts, 50);
#if GTP_ESD_PROTECT
gtp_init_ext_watchdog(ts->client);
#endif
}
#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_FB)
#if GTP_SLIDE_WAKEUP
/*******************************************************
Function:
Enter doze mode for sliding wakeup.
Input:
ts: goodix tp private data
Output:
1: succeed, otherwise failed
*******************************************************/
static s8 gtp_enter_doze(struct goodix_ts_data *ts)
{
int ret = -1;
s8 retry = 0;
u8 i2c_control_buf[3] = {
(u8)(GTP_REG_SLEEP >> 8),
(u8)GTP_REG_SLEEP, 8};
#if GTP_DBL_CLK_WAKEUP
i2c_control_buf[2] = 0x09;
#endif
gtp_irq_disable(ts);
while (retry++ < 5) {
i2c_control_buf[0] = 0x80;
i2c_control_buf[1] = 0x46;
ret = gtp_i2c_write(ts->client, i2c_control_buf, 3);
if (ret < 0) {
dev_err(&ts->client->dev,
"failed to set doze flag into 0x8046, %d",
retry);
continue;
}
i2c_control_buf[0] = 0x80;
i2c_control_buf[1] = 0x40;
ret = gtp_i2c_write(ts->client, i2c_control_buf, 3);
if (ret > 0) {
doze_status = DOZE_ENABLED;
dev_dbg(&ts->client->dev,
"GTP has been working in doze mode!");
gtp_irq_enable(ts);
return ret;
}
msleep(20);
}
dev_err(&ts->client->dev, "GTP send doze cmd failed.\n");
gtp_irq_enable(ts);
return ret;
}
#else
/*******************************************************
Function:
Enter sleep mode.
Input:
ts: private data.
Output:
Executive outcomes.
1: succeed, otherwise failed.
*******************************************************/
static s8 gtp_enter_sleep(struct goodix_ts_data *ts)
{
int ret = -1;
s8 retry = 0;
u8 i2c_control_buf[3] = {
(u8)(GTP_REG_SLEEP >> 8),
(u8)GTP_REG_SLEEP, 5};
ret = gpio_direction_output(ts->pdata->irq_gpio, 0);
usleep(5000);
while (retry++ < 5) {
ret = gtp_i2c_write(ts->client, i2c_control_buf, 3);
if (ret > 0) {
dev_dbg(&ts->client->dev,
"GTP enter sleep!");
return ret;
}
msleep(20);
}
dev_err(&ts->client->dev, "GTP send sleep cmd failed.\n");
return ret;
}
#endif
/*******************************************************
Function:
Wakeup from sleep.
Input:
ts: private data.
Output:
Executive outcomes.
>0: succeed, otherwise: failed.
*******************************************************/
static s8 gtp_wakeup_sleep(struct goodix_ts_data *ts)
{
u8 retry = 0;
s8 ret = -1;
#if GTP_POWER_CTRL_SLEEP
gtp_reset_guitar(ts, 20);
ret = gtp_send_cfg(ts);
if (ret > 0) {
dev_dbg(&ts->client->dev,
"Wakeup sleep send config success.");
return 1;
}
#else
while (retry++ < 10) {
#if GTP_SLIDE_WAKEUP
/* wakeup not by slide */
if (DOZE_WAKEUP != doze_status)
gtp_reset_guitar(ts, 10);
else
/* wakeup by slide */
doze_status = DOZE_DISABLED;
#else
if (chip_gt9xxs == 1) {
gtp_reset_guitar(ts, 10);
} else {
ret = gpio_direction_output(ts->pdata->irq_gpio, 1);
usleep(5000);
}
#endif
ret = gtp_i2c_test(ts->client);
if (ret > 0) {
dev_dbg(&ts->client->dev, "GTP wakeup sleep.");
#if (!GTP_SLIDE_WAKEUP)
if (chip_gt9xxs == 0) {
gtp_int_sync(ts, 25);
msleep(20);
#if GTP_ESD_PROTECT
gtp_init_ext_watchdog(ts->client);
#endif
}
#endif
return ret;
}
gtp_reset_guitar(ts, 20);
}
#endif
dev_err(&ts->client->dev, "GTP wakeup sleep failed.\n");
return ret;
}
#endif /* !CONFIG_HAS_EARLYSUSPEND && !CONFIG_FB*/
/*******************************************************
Function:
Initialize gtp.
Input:
ts: goodix private data
Output:
Executive outcomes.
> =0: succeed, otherwise: failed
*******************************************************/
static int gtp_init_panel(struct goodix_ts_data *ts)
{
struct i2c_client *client = ts->client;
unsigned char *config_data;
int ret = -EIO;
#if GTP_DRIVER_SEND_CFG
int i;
u8 check_sum = 0;
u8 opr_buf[16];
u8 sensor_id = 0;
for (i = 0; i < GOODIX_MAX_CFG_GROUP; i++)
dev_dbg(&client->dev, "Config Groups(%d) Lengths: %d",
i, ts->pdata->config_data_len[i]);
ret = gtp_i2c_read_dbl_check(ts->client, 0x41E4, opr_buf, 1);
if (SUCCESS == ret) {
if (opr_buf[0] != 0xBE) {
ts->fw_error = 1;
dev_err(&client->dev,
"Firmware error, no config sent!");
return -EINVAL;
}
}
for (i = 1; i < GOODIX_MAX_CFG_GROUP; i++) {
if (ts->pdata->config_data_len[i])
break;
}
if (i == GOODIX_MAX_CFG_GROUP) {
sensor_id = 0;
} else {
ret = gtp_i2c_read_dbl_check(ts->client, GTP_REG_SENSOR_ID,
&sensor_id, 1);
if (SUCCESS == ret) {
if (sensor_id >= GOODIX_MAX_CFG_GROUP) {
dev_err(&client->dev,
"Invalid sensor_id(0x%02X), No Config Sent!",
sensor_id);
return -EINVAL;
}
} else {
dev_err(&client->dev,
"Failed to get sensor_id, No config sent!");
return -EINVAL;
}
}
dev_info(&client->dev, "Sensor ID selected: %d", sensor_id);
if (ts->pdata->config_data_len[sensor_id] < GTP_CONFIG_MIN_LENGTH ||
!ts->pdata->config_data[sensor_id]) {
dev_err(&client->dev,
"Sensor_ID(%d) matches with NULL or invalid config group!\n",
sensor_id);
return -EINVAL;
}
ret = gtp_i2c_read_dbl_check(ts->client, GTP_REG_CONFIG_DATA,
&opr_buf[0], 1);
if (ret == SUCCESS) {
if (opr_buf[0] < 90) {
/* backup group config version */
grp_cfg_version =
ts->pdata->config_data[sensor_id][GTP_ADDR_LENGTH];
ts->pdata->config_data[sensor_id][GTP_ADDR_LENGTH] =
0x00;
ts->fixed_cfg = 0;
} else {
/* treated as fixed config, not send config */
dev_warn(&client->dev,
"Ic fixed config with config version(%d, 0x%02X)",
opr_buf[0], opr_buf[0]);
ts->fixed_cfg = 1;
}
} else {
dev_err(&client->dev,
"Failed to get ic config version!No config sent!");
return -EINVAL;
}
config_data = ts->pdata->config_data[sensor_id];
ts->config_data = ts->pdata->config_data[sensor_id];
ts->gtp_cfg_len = ts->pdata->config_data_len[sensor_id];
#if GTP_CUSTOM_CFG
config_data[RESOLUTION_LOC] =
(unsigned char)(GTP_MAX_WIDTH && 0xFF);
config_data[RESOLUTION_LOC + 1] =
(unsigned char)(GTP_MAX_WIDTH >> 8);
config_data[RESOLUTION_LOC + 2] =
(unsigned char)(GTP_MAX_HEIGHT && 0xFF);
config_data[RESOLUTION_LOC + 3] =
(unsigned char)(GTP_MAX_HEIGHT >> 8);
if (GTP_INT_TRIGGER == 0)
config_data[TRIGGER_LOC] &= 0xfe;
else if (GTP_INT_TRIGGER == 1)
config_data[TRIGGER_LOC] |= 0x01;
#endif /* !GTP_CUSTOM_CFG */
check_sum = 0;
for (i = GTP_ADDR_LENGTH; i < ts->gtp_cfg_len; i++)
check_sum += config_data[i];
config_data[ts->gtp_cfg_len] = (~check_sum) + 1;
#else /* DRIVER NOT SEND CONFIG */
ts->gtp_cfg_len = GTP_CONFIG_MAX_LENGTH;
ret = gtp_i2c_read(ts->client, config_data,
ts->gtp_cfg_len + GTP_ADDR_LENGTH);
if (ret < 0) {
dev_err(&client->dev,
"Read Config Failed, Using DEFAULT Resolution & INT Trigger!\n");
ts->abs_x_max = GTP_MAX_WIDTH;
ts->abs_y_max = GTP_MAX_HEIGHT;
ts->int_trigger_type = GTP_INT_TRIGGER;
}
#endif /* !DRIVER NOT SEND CONFIG */
if ((ts->abs_x_max == 0) && (ts->abs_y_max == 0)) {
ts->abs_x_max = (config_data[RESOLUTION_LOC + 1] << 8)
+ config_data[RESOLUTION_LOC];
ts->abs_y_max = (config_data[RESOLUTION_LOC + 3] << 8)
+ config_data[RESOLUTION_LOC + 2];
ts->int_trigger_type = (config_data[TRIGGER_LOC]) & 0x03;
}
ret = gtp_send_cfg(ts);
if (ret < 0)
dev_err(&client->dev, "%s: Send config error.\n", __func__);
msleep(20);
return ret;
}
/*******************************************************
Function:
Read firmware version
Input:
client: i2c device
version: buffer to keep ic firmware version
Output:
read operation return.
0: succeed, otherwise: failed
*******************************************************/
static int gtp_read_fw_version(struct i2c_client *client, u16 *version)
{
int ret = 0;
u8 buf[GTP_FW_VERSION_BUFFER_MAXSIZE] = {
GTP_REG_FW_VERSION >> 8, GTP_REG_FW_VERSION & 0xff };
ret = gtp_i2c_read(client, buf, sizeof(buf));
if (ret < 0) {
dev_err(&client->dev, "GTP read version failed.\n");
return -EIO;
}
if (version)
*version = (buf[3] << 8) | buf[2];
return ret;
}
/*******************************************************
Function:
Read and check chip id.
Input:
client: i2c device
Output:
read operation return.
0: succeed, otherwise: failed
*******************************************************/
static int gtp_check_product_id(struct i2c_client *client)
{
int ret = 0;
char product_id[GTP_PRODUCT_ID_MAXSIZE];
struct goodix_ts_data *ts = i2c_get_clientdata(client);
/* 04 bytes are used for the Product-id in the register space.*/
u8 buf[GTP_PRODUCT_ID_BUFFER_MAXSIZE] = {
GTP_REG_PRODUCT_ID >> 8, GTP_REG_PRODUCT_ID & 0xff };
ret = gtp_i2c_read(client, buf, sizeof(buf));
if (ret < 0) {
dev_err(&client->dev, "GTP read version failed.\n");
return -EIO;
}
if (buf[5] == 0x00) {
/* copy (GTP_PRODUCT_ID_MAXSIZE - 1) from buffer. Ex: 915 */
strlcpy(product_id, &buf[2], GTP_PRODUCT_ID_MAXSIZE - 1);
} else {
if (buf[5] == 'S' || buf[5] == 's')
chip_gt9xxs = 1;
/* copy GTP_PRODUCT_ID_MAXSIZE from buffer. Ex: 915s */
strlcpy(product_id, &buf[2], GTP_PRODUCT_ID_MAXSIZE);
}
dev_info(&client->dev, "Goodix Product ID = %s\n", product_id);
if (!IS_ERR(ts->pdata->product_id))
ret = strcmp(product_id, ts->pdata->product_id);
if (ret != 0)
return -EINVAL;
return ret;
}
/*******************************************************
Function:
I2c test Function.
Input:
client:i2c client.
Output:
Executive outcomes.
2: succeed, otherwise failed.
*******************************************************/
static int gtp_i2c_test(struct i2c_client *client)
{
u8 buf[3] = { GTP_REG_CONFIG_DATA >> 8, GTP_REG_CONFIG_DATA & 0xff };
int retry = 5;
int ret = -EIO;
while (retry--) {
ret = gtp_i2c_read(client, buf, 3);
if (ret > 0)
return ret;
dev_err(&client->dev, "GTP i2c test failed time %d.\n", retry);
msleep(20);
}
return ret;
}
/*******************************************************
Function:
Request gpio(INT & RST) ports.
Input:
ts: private data.
Output:
Executive outcomes.
= 0: succeed, != 0: failed
*******************************************************/
static int gtp_request_io_port(struct goodix_ts_data *ts)
{
struct i2c_client *client = ts->client;
struct goodix_ts_platform_data *pdata = ts->pdata;
int ret;
if (gpio_is_valid(pdata->irq_gpio)) {
ret = gpio_request(pdata->irq_gpio, "goodix_ts_irq_gpio");
if (ret) {
dev_err(&client->dev, "irq gpio request failed\n");
goto pwr_off;
}
ret = gpio_direction_input(pdata->irq_gpio);
if (ret) {
dev_err(&client->dev,
"set_direction for irq gpio failed\n");
goto free_irq_gpio;
}
} else {
dev_err(&client->dev, "irq gpio is invalid!\n");
ret = -EINVAL;
goto free_irq_gpio;
}
if (gpio_is_valid(pdata->reset_gpio)) {
ret = gpio_request(pdata->reset_gpio, "goodix_ts__reset_gpio");
if (ret) {
dev_err(&client->dev, "reset gpio request failed\n");
goto free_irq_gpio;
}
ret = gpio_direction_output(pdata->reset_gpio, 0);
if (ret) {
dev_err(&client->dev,
"set_direction for reset gpio failed\n");
goto free_reset_gpio;
}
} else {
dev_err(&client->dev, "reset gpio is invalid!\n");
ret = -EINVAL;
goto free_reset_gpio;
}
gpio_direction_input(pdata->reset_gpio);
return ret;
free_reset_gpio:
if (gpio_is_valid(pdata->reset_gpio))
gpio_free(pdata->reset_gpio);
free_irq_gpio:
if (gpio_is_valid(pdata->irq_gpio))
gpio_free(pdata->irq_gpio);
pwr_off:
return ret;
}
/*******************************************************
Function:
Request interrupt.
Input:
ts: private data.
Output:
Executive outcomes.
0: succeed, -1: failed.
*******************************************************/
static int gtp_request_irq(struct goodix_ts_data *ts)
{
int ret;
const u8 irq_table[] = GTP_IRQ_TAB;
ret = request_irq(ts->client->irq, goodix_ts_irq_handler,
irq_table[ts->int_trigger_type],
ts->client->name, ts);
if (ret) {
dev_err(&ts->client->dev, "Request IRQ failed!ERRNO:%d.\n",
ret);
gpio_direction_input(ts->pdata->irq_gpio);
hrtimer_init(&ts->timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
ts->timer.function = goodix_ts_timer_handler;
hrtimer_start(&ts->timer, ktime_set(1, 0),
HRTIMER_MODE_REL);
ts->use_irq = false;
return ret;
} else {
gtp_irq_disable(ts);
ts->use_irq = true;
return 0;
}
}
/*******************************************************
Function:
Request input device Function.
Input:
ts:private data.
Output:
Executive outcomes.
0: succeed, otherwise: failed.
*******************************************************/
static int gtp_request_input_dev(struct goodix_ts_data *ts)
{
int ret;
char phys[PHY_BUF_SIZE];
#if GTP_HAVE_TOUCH_KEY
int index = 0;
#endif
ts->input_dev = input_allocate_device();
if (ts->input_dev == NULL) {
dev_err(&ts->client->dev,
"Failed to allocate input device.\n");
return -ENOMEM;
}
ts->input_dev->evbit[0] =
BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) ;
set_bit(BTN_TOOL_FINGER, ts->input_dev->keybit);
__set_bit(INPUT_PROP_DIRECT, ts->input_dev->propbit);
input_mt_init_slots(ts->input_dev, 10);/* in case of "out of memory" */
#if GTP_HAVE_TOUCH_KEY
for (index = 0; index < GTP_MAX_KEY_NUM; index++) {
input_set_capability(ts->input_dev,
EV_KEY, touch_key_array[index]);
}
#endif
#if GTP_SLIDE_WAKEUP
input_set_capability(ts->input_dev, EV_KEY, KEY_POWER);
#endif
#if GTP_WITH_PEN
/* pen support */
__set_bit(BTN_TOOL_PEN, ts->input_dev->keybit);
__set_bit(INPUT_PROP_DIRECT, ts->input_dev->propbit);
__set_bit(INPUT_PROP_POINTER, ts->input_dev->propbit);
#endif
#if GTP_CHANGE_X2Y
swap(ts->abs_x_max, ts->abs_y_max);
#endif
input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
0, ts->abs_x_max, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
0, ts->abs_y_max, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR,
0, 255, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR,
0, 255, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_TRACKING_ID,
0, 255, 0, 0);
snprintf(phys, PHY_BUF_SIZE, "input/ts");
ts->input_dev->name = GOODIX_DEV_NAME;
ts->input_dev->phys = phys;
ts->input_dev->id.bustype = BUS_I2C;
ts->input_dev->id.vendor = 0xDEAD;
ts->input_dev->id.product = 0xBEEF;
ts->input_dev->id.version = 10427;
ret = input_register_device(ts->input_dev);
if (ret) {
dev_err(&ts->client->dev,
"Register %s input device failed.\n",
ts->input_dev->name);
goto exit_free_inputdev;
}
return 0;
exit_free_inputdev:
input_free_device(ts->input_dev);
ts->input_dev = NULL;
return ret;
}
static int reg_set_optimum_mode_check(struct regulator *reg, int load_uA)
{
return (regulator_count_voltages(reg) > 0) ?
regulator_set_optimum_mode(reg, load_uA) : 0;
}
/**
* goodix_power_on - Turn device power ON
* @ts: driver private data
*
* Returns zero on success, else an error.
*/
static int goodix_power_on(struct goodix_ts_data *ts)
{
int ret;
if (!IS_ERR(ts->avdd)) {
ret = reg_set_optimum_mode_check(ts->avdd,
GOODIX_VDD_LOAD_MAX_UA);
if (ret < 0) {
dev_err(&ts->client->dev,
"Regulator avdd set_opt failed rc=%d\n", ret);
goto err_set_opt_avdd;
}
ret = regulator_enable(ts->avdd);
if (ret) {
dev_err(&ts->client->dev,
"Regulator avdd enable failed ret=%d\n", ret);
goto err_enable_avdd;
}
}
if (!IS_ERR(ts->vdd)) {
ret = regulator_set_voltage(ts->vdd, GOODIX_VTG_MIN_UV,
GOODIX_VTG_MAX_UV);
if (ret) {
dev_err(&ts->client->dev,
"Regulator set_vtg failed vdd ret=%d\n", ret);
goto err_set_vtg_vdd;
}
ret = reg_set_optimum_mode_check(ts->vdd,
GOODIX_VDD_LOAD_MAX_UA);
if (ret < 0) {
dev_err(&ts->client->dev,
"Regulator vdd set_opt failed rc=%d\n", ret);
goto err_set_opt_vdd;
}
ret = regulator_enable(ts->vdd);
if (ret) {
dev_err(&ts->client->dev,
"Regulator vdd enable failed ret=%d\n", ret);
goto err_enable_vdd;
}
}
if (!IS_ERR(ts->vcc_i2c)) {
ret = regulator_set_voltage(ts->vcc_i2c, GOODIX_I2C_VTG_MIN_UV,
GOODIX_I2C_VTG_MAX_UV);
if (ret) {
dev_err(&ts->client->dev,
"Regulator set_vtg failed vcc_i2c ret=%d\n",
ret);
goto err_set_vtg_vcc_i2c;
}
ret = reg_set_optimum_mode_check(ts->vcc_i2c,
GOODIX_VIO_LOAD_MAX_UA);
if (ret < 0) {
dev_err(&ts->client->dev,
"Regulator vcc_i2c set_opt failed rc=%d\n",
ret);
goto err_set_opt_vcc_i2c;
}
ret = regulator_enable(ts->vcc_i2c);
if (ret) {
dev_err(&ts->client->dev,
"Regulator vcc_i2c enable failed ret=%d\n",
ret);
regulator_disable(ts->vdd);
goto err_enable_vcc_i2c;
}
}
return 0;
err_enable_vcc_i2c:
err_set_opt_vcc_i2c:
if (!IS_ERR(ts->vcc_i2c))
regulator_set_voltage(ts->vcc_i2c, 0, GOODIX_I2C_VTG_MAX_UV);
err_set_vtg_vcc_i2c:
if (!IS_ERR(ts->vdd))
regulator_disable(ts->vdd);
err_enable_vdd:
err_set_opt_vdd:
if (!IS_ERR(ts->vdd))
regulator_set_voltage(ts->vdd, 0, GOODIX_VTG_MAX_UV);
err_set_vtg_vdd:
if (!IS_ERR(ts->avdd))
regulator_disable(ts->avdd);
err_enable_avdd:
err_set_opt_avdd:
return ret;
}
/**
* goodix_power_off - Turn device power OFF
* @ts: driver private data
*
* Returns zero on success, else an error.
*/
static int goodix_power_off(struct goodix_ts_data *ts)
{
int ret;
if (!IS_ERR(ts->vcc_i2c)) {
ret = regulator_set_voltage(ts->vcc_i2c, 0,
GOODIX_I2C_VTG_MAX_UV);
if (ret < 0)
dev_err(&ts->client->dev,
"Regulator vcc_i2c set_vtg failed ret=%d\n",
ret);
ret = regulator_disable(ts->vcc_i2c);
if (ret)
dev_err(&ts->client->dev,
"Regulator vcc_i2c disable failed ret=%d\n",
ret);
}
if (!IS_ERR(ts->vdd)) {
ret = regulator_set_voltage(ts->vdd, 0, GOODIX_VTG_MAX_UV);
if (ret < 0)
dev_err(&ts->client->dev,
"Regulator vdd set_vtg failed ret=%d\n", ret);
ret = regulator_disable(ts->vdd);
if (ret)
dev_err(&ts->client->dev,
"Regulator vdd disable failed ret=%d\n", ret);
}
if (!IS_ERR(ts->avdd)) {
ret = regulator_disable(ts->avdd);
if (ret)
dev_err(&ts->client->dev,
"Regulator avdd disable failed ret=%d\n", ret);
}
return 0;
}
/**
* goodix_power_init - Initialize device power
* @ts: driver private data
*
* Returns zero on success, else an error.
*/
static int goodix_power_init(struct goodix_ts_data *ts)
{
int ret;
ts->avdd = regulator_get(&ts->client->dev, "avdd");
if (IS_ERR(ts->avdd)) {
ret = PTR_ERR(ts->avdd);
dev_info(&ts->client->dev,
"Regulator get failed avdd ret=%d\n", ret);
}
ts->vdd = regulator_get(&ts->client->dev, "vdd");
if (IS_ERR(ts->vdd)) {
ret = PTR_ERR(ts->vdd);
dev_info(&ts->client->dev,
"Regulator get failed vdd ret=%d\n", ret);
}
ts->vcc_i2c = regulator_get(&ts->client->dev, "vcc-i2c");
if (IS_ERR(ts->vcc_i2c)) {
ret = PTR_ERR(ts->vcc_i2c);
dev_info(&ts->client->dev,
"Regulator get failed vcc_i2c ret=%d\n", ret);
}
return 0;
}
/**
* goodix_power_deinit - Deinitialize device power
* @ts: driver private data
*
* Returns zero on success, else an error.
*/
static int goodix_power_deinit(struct goodix_ts_data *ts)
{
regulator_put(ts->vdd);
regulator_put(ts->vcc_i2c);
regulator_put(ts->avdd);
return 0;
}
static int goodix_ts_get_dt_coords(struct device *dev, char *name,
struct goodix_ts_platform_data *pdata)
{
struct property *prop;
struct device_node *np = dev->of_node;
int rc;
u32 coords[GOODIX_COORDS_ARR_SIZE];
prop = of_find_property(np, name, NULL);
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
rc = of_property_read_u32_array(np, name, coords,
GOODIX_COORDS_ARR_SIZE);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read %s\n", name);
return rc;
}
if (!strcmp(name, "goodix,panel-coords")) {
pdata->panel_minx = coords[0];
pdata->panel_miny = coords[1];
pdata->panel_maxx = coords[2];
pdata->panel_maxy = coords[3];
} else if (!strcmp(name, "goodix,display-coords")) {
pdata->x_min = coords[0];
pdata->y_min = coords[1];
pdata->x_max = coords[2];
pdata->y_max = coords[3];
} else {
dev_err(dev, "unsupported property %s\n", name);
return -EINVAL;
}
return 0;
}
static int goodix_parse_dt(struct device *dev,
struct goodix_ts_platform_data *pdata)
{
int rc;
struct device_node *np = dev->of_node;
struct property *prop;
u32 temp_val, num_buttons;
u32 button_map[MAX_BUTTONS];
char prop_name[PROP_NAME_SIZE];
int i, read_cfg_num;
rc = goodix_ts_get_dt_coords(dev, "goodix,panel-coords", pdata);
if (rc && (rc != -EINVAL))
return rc;
rc = goodix_ts_get_dt_coords(dev, "goodix,display-coords", pdata);
if (rc)
return rc;
pdata->i2c_pull_up = of_property_read_bool(np,
"goodix,i2c-pull-up");
pdata->no_force_update = of_property_read_bool(np,
"goodix,no-force-update");
/* reset, irq gpio info */
pdata->reset_gpio = of_get_named_gpio_flags(np, "reset-gpios",
0, &pdata->reset_gpio_flags);
if (pdata->reset_gpio < 0)
return pdata->reset_gpio;
pdata->irq_gpio = of_get_named_gpio_flags(np, "interrupt-gpios",
0, &pdata->irq_gpio_flags);
if (pdata->irq_gpio < 0)
return pdata->irq_gpio;
rc = of_property_read_string(np, "goodix,product-id",
&pdata->product_id);
if (rc < 0 || strlen(pdata->product_id) > GTP_PRODUCT_ID_MAXSIZE)
return rc;
prop = of_find_property(np, "goodix,button-map", NULL);
if (prop) {
num_buttons = prop->length / sizeof(temp_val);
if (num_buttons > MAX_BUTTONS)
return -EINVAL;
rc = of_property_read_u32_array(np,
"goodix,button-map", button_map,
num_buttons);
if (rc) {
dev_err(dev, "Unable to read key codes\n");
return rc;
}
}
read_cfg_num = 0;
for (i = 0; i < GOODIX_MAX_CFG_GROUP; i++) {
snprintf(prop_name, sizeof(prop_name), "goodix,cfg-data%d", i);
prop = of_find_property(np, prop_name,
&pdata->config_data_len[i]);
if (!prop || !prop->value) {
pdata->config_data_len[i] = 0;
pdata->config_data[i] = NULL;
continue;
}
pdata->config_data[i] = devm_kzalloc(dev,
GTP_CONFIG_MAX_LENGTH + GTP_ADDR_LENGTH,
GFP_KERNEL);
if (!pdata->config_data[i]) {
dev_err(dev,
"Not enough memory for panel config data %d\n",
i);
return -ENOMEM;
}
pdata->config_data[i][0] = GTP_REG_CONFIG_DATA >> 8;
pdata->config_data[i][1] = GTP_REG_CONFIG_DATA & 0xff;
memcpy(&pdata->config_data[i][GTP_ADDR_LENGTH],
prop->value, pdata->config_data_len[i]);
read_cfg_num++;
}
dev_dbg(dev, "%d config data read from device tree.\n", read_cfg_num);
return 0;
}
/*******************************************************
Function:
I2c probe.
Input:
client: i2c device struct.
id: device id.
Output:
Executive outcomes.
0: succeed.
*******************************************************/
static int goodix_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct goodix_ts_platform_data *pdata;
struct goodix_ts_data *ts;
u16 version_info;
int ret;
dev_dbg(&client->dev, "GTP I2C Address: 0x%02x\n", client->addr);
if (client->dev.of_node) {
pdata = devm_kzalloc(&client->dev,
sizeof(struct goodix_ts_platform_data), GFP_KERNEL);
if (!pdata) {
dev_err(&client->dev,
"GTP Failed to allocate memory for pdata\n");
return -ENOMEM;
}
ret = goodix_parse_dt(&client->dev, pdata);
if (ret)
return ret;
} else {
pdata = client->dev.platform_data;
}
if (!pdata) {
dev_err(&client->dev, "GTP invalid pdata\n");
return -EINVAL;
}
#if GTP_ESD_PROTECT
i2c_connect_client = client;
#endif
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev, "GTP I2C not supported\n");
return -ENODEV;
}
ts = kzalloc(sizeof(*ts), GFP_KERNEL);
if (!ts) {
dev_err(&client->dev, "GTP not enough memory for ts\n");
return -ENOMEM;
}
memset(ts, 0, sizeof(*ts));
ts->client = client;
ts->pdata = pdata;
/* For 2.6.39 & later use spin_lock_init(&ts->irq_lock)
* For 2.6.39 & before, use ts->irq_lock = SPIN_LOCK_UNLOCKED
*/
spin_lock_init(&ts->irq_lock);
i2c_set_clientdata(client, ts);
ts->gtp_rawdiff_mode = 0;
ret = goodix_power_init(ts);
if (ret) {
dev_err(&client->dev, "GTP power init failed\n");
goto exit_free_client_data;
}
ret = goodix_power_on(ts);
if (ret) {
dev_err(&client->dev, "GTP power on failed\n");
goto exit_deinit_power;
}
ret = gtp_request_io_port(ts);
if (ret) {
dev_err(&client->dev, "GTP request IO port failed.\n");
goto exit_power_off;
}
gtp_reset_guitar(ts, 20);
ret = gtp_i2c_test(client);
if (ret != 2) {
dev_err(&client->dev, "I2C communication ERROR!\n");
goto exit_free_io_port;
}
#if GTP_AUTO_UPDATE
ret = gup_init_update_proc(ts);
if (ret < 0) {
dev_err(&client->dev,
"GTP Create firmware update thread error.\n");
goto exit_free_io_port;
}
#endif
ret = gtp_init_panel(ts);
if (ret < 0) {
dev_err(&client->dev, "GTP init panel failed.\n");
ts->abs_x_max = GTP_MAX_WIDTH;
ts->abs_y_max = GTP_MAX_HEIGHT;
ts->int_trigger_type = GTP_INT_TRIGGER;
}
ret = gtp_request_input_dev(ts);
if (ret) {
dev_err(&client->dev, "GTP request input dev failed.\n");
goto exit_free_inputdev;
}
#if defined(CONFIG_FB)
ts->fb_notif.notifier_call = fb_notifier_callback;
ret = fb_register_client(&ts->fb_notif);
if (ret)
dev_err(&ts->client->dev,
"Unable to register fb_notifier: %d\n",
ret);
#elif defined(CONFIG_HAS_EARLYSUSPEND)
ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
ts->early_suspend.suspend = goodix_ts_early_suspend;
ts->early_suspend.resume = goodix_ts_late_resume;
register_early_suspend(&ts->early_suspend);
#endif
ts->goodix_wq = create_singlethread_workqueue("goodix_wq");
INIT_WORK(&ts->work, goodix_ts_work_func);
ret = gtp_request_irq(ts);
if (ret < 0)
dev_info(&client->dev, "GTP works in polling mode.\n");
else
dev_info(&client->dev, "GTP works in interrupt mode.\n");
ret = gtp_read_fw_version(client, &version_info);
if (ret != 0)
dev_err(&client->dev, "GTP firmware version read failed.\n");
ret = gtp_check_product_id(client);
if (ret != 0) {
dev_err(&client->dev, "GTP Product id doesn't match.\n");
goto exit_free_irq;
}
if (ts->use_irq)
gtp_irq_enable(ts);
#if GTP_CREATE_WR_NODE
init_wr_node(client);
#endif
#if GTP_ESD_PROTECT
gtp_esd_switch(client, SWITCH_ON);
#endif
init_done = true;
return 0;
exit_free_irq:
#if defined(CONFIG_FB)
if (fb_unregister_client(&ts->fb_notif))
dev_err(&client->dev,
"Error occurred while unregistering fb_notifier.\n");
#elif defined(CONFIG_HAS_EARLYSUSPEND)
unregister_early_suspend(&ts->early_suspend);
#endif
if (ts->use_irq)
free_irq(client->irq, ts);
else
hrtimer_cancel(&ts->timer);
cancel_work_sync(&ts->work);
flush_workqueue(ts->goodix_wq);
destroy_workqueue(ts->goodix_wq);
input_unregister_device(ts->input_dev);
if (ts->input_dev) {
input_free_device(ts->input_dev);
ts->input_dev = NULL;
}
exit_free_inputdev:
kfree(ts->config_data);
exit_free_io_port:
if (gpio_is_valid(pdata->reset_gpio))
gpio_free(pdata->reset_gpio);
if (gpio_is_valid(pdata->irq_gpio))
gpio_free(pdata->irq_gpio);
exit_power_off:
goodix_power_off(ts);
exit_deinit_power:
goodix_power_deinit(ts);
exit_free_client_data:
i2c_set_clientdata(client, NULL);
kfree(ts);
return ret;
}
/*******************************************************
Function:
Goodix touchscreen driver release function.
Input:
client: i2c device struct.
Output:
Executive outcomes. 0---succeed.
*******************************************************/
static int goodix_ts_remove(struct i2c_client *client)
{
struct goodix_ts_data *ts = i2c_get_clientdata(client);
#if defined(CONFIG_FB)
if (fb_unregister_client(&ts->fb_notif))
dev_err(&client->dev,
"Error occurred while unregistering fb_notifier.\n");
#elif defined(CONFIG_HAS_EARLYSUSPEND)
unregister_early_suspend(&ts->early_suspend);
#endif
#if GTP_CREATE_WR_NODE
uninit_wr_node();
#endif
#if GTP_ESD_PROTECT
cancel_work_sync(gtp_esd_check_workqueue);
flush_workqueue(gtp_esd_check_workqueue);
destroy_workqueue(gtp_esd_check_workqueue);
#endif
if (ts) {
if (ts->use_irq)
free_irq(client->irq, ts);
else
hrtimer_cancel(&ts->timer);
cancel_work_sync(&ts->work);
flush_workqueue(ts->goodix_wq);
destroy_workqueue(ts->goodix_wq);
input_unregister_device(ts->input_dev);
if (ts->input_dev) {
input_free_device(ts->input_dev);
ts->input_dev = NULL;
}
kfree(ts->config_data);
if (gpio_is_valid(ts->pdata->reset_gpio))
gpio_free(ts->pdata->reset_gpio);
if (gpio_is_valid(ts->pdata->irq_gpio))
gpio_free(ts->pdata->irq_gpio);
goodix_power_off(ts);
goodix_power_deinit(ts);
i2c_set_clientdata(client, NULL);
kfree(ts);
}
return 0;
}
#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_FB)
/*******************************************************
Function:
Early suspend function.
Input:
h: early_suspend struct.
Output:
None.
*******************************************************/
static void goodix_ts_suspend(struct goodix_ts_data *ts)
{
int ret = -1, i;
#if GTP_ESD_PROTECT
ts->gtp_is_suspend = 1;
gtp_esd_switch(ts->client, SWITCH_OFF);
#endif
#if GTP_SLIDE_WAKEUP
ret = gtp_enter_doze(ts);
#else
if (ts->use_irq)
gtp_irq_disable(ts);
else
hrtimer_cancel(&ts->timer);
for (i = 0; i < GTP_MAX_TOUCH; i++)
gtp_touch_up(ts, i);
input_sync(ts->input_dev);
ret = gtp_enter_sleep(ts);
#endif
if (ret < 0)
dev_err(&ts->client->dev, "GTP early suspend failed.\n");
/* to avoid waking up while not sleeping,
* delay 48 + 10ms to ensure reliability
*/
msleep(58);
}
/*******************************************************
Function:
Late resume function.
Input:
h: early_suspend struct.
Output:
None.
*******************************************************/
static void goodix_ts_resume(struct goodix_ts_data *ts)
{
int ret = -1;
ret = gtp_wakeup_sleep(ts);
#if GTP_SLIDE_WAKEUP
doze_status = DOZE_DISABLED;
#endif
if (ret < 0)
dev_err(&ts->client->dev, "GTP resume failed.\n");
if (ts->use_irq)
gtp_irq_enable(ts);
else
hrtimer_start(&ts->timer,
ktime_set(1, 0), HRTIMER_MODE_REL);
#if GTP_ESD_PROTECT
ts->gtp_is_suspend = 0;
gtp_esd_switch(ts->client, SWITCH_ON);
#endif
}
#if defined(CONFIG_FB)
static int fb_notifier_callback(struct notifier_block *self,
unsigned long event, void *data)
{
struct fb_event *evdata = data;
int *blank;
struct goodix_ts_data *ts =
container_of(self, struct goodix_ts_data, fb_notif);
if (evdata && evdata->data && event == FB_EVENT_BLANK &&
ts && ts->client) {
blank = evdata->data;
if (*blank == FB_BLANK_UNBLANK)
goodix_ts_resume(ts);
else if (*blank == FB_BLANK_POWERDOWN)
goodix_ts_suspend(ts);
}
return 0;
}
#elif defined(CONFIG_HAS_EARLYSUSPEND)
/*******************************************************
Function:
Early suspend function.
Input:
h: early_suspend struct.
Output:
None.
*******************************************************/
static void goodix_ts_early_suspend(struct early_suspend *h)
{
struct goodix_ts_data *ts;
ts = container_of(h, struct goodix_ts_data, early_suspend);
goodix_ts_suspend(ts);
return;
}
/*******************************************************
Function:
Late resume function.
Input:
h: early_suspend struct.
Output:
None.
*******************************************************/
static void goodix_ts_late_resume(struct early_suspend *h)
{
struct goodix_ts_data *ts;
ts = container_of(h, struct goodix_ts_data, early_suspend);
goodix_ts_late_resume(ts);
return;
}
#endif
#endif /* !CONFIG_HAS_EARLYSUSPEND && !CONFIG_FB*/
#if GTP_ESD_PROTECT
/*******************************************************
Function:
switch on & off esd delayed work
Input:
client: i2c device
on: SWITCH_ON / SWITCH_OFF
Output:
void
*********************************************************/
void gtp_esd_switch(struct i2c_client *client, int on)
{
struct goodix_ts_data *ts;
ts = i2c_get_clientdata(client);
if (SWITCH_ON == on) {
/* switch on esd */
if (!ts->esd_running) {
ts->esd_running = 1;
dev_dbg(&client->dev, "Esd started\n");
queue_delayed_work(gtp_esd_check_workqueue,
&gtp_esd_check_work, GTP_ESD_CHECK_CIRCLE);
}
} else {
/* switch off esd */
if (ts->esd_running) {
ts->esd_running = 0;
dev_dbg(&client->dev, "Esd cancelled\n");
cancel_delayed_work_sync(&gtp_esd_check_work);
}
}
}
/*******************************************************
Function:
Initialize external watchdog for esd protect
Input:
client: i2c device.
Output:
result of i2c write operation.
1: succeed, otherwise: failed
*********************************************************/
static int gtp_init_ext_watchdog(struct i2c_client *client)
{
/* in case of recursively reset by calling gtp_i2c_write*/
struct i2c_msg msg;
u8 opr_buffer[4] = {0x80, 0x40, 0xAA, 0xAA};
int ret;
int retries = 0;
msg.flags = !I2C_M_RD;
msg.addr = client->addr;
msg.len = 4;
msg.buf = opr_buffer;
while (retries < 5) {
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret == 1)
return 1;
retries++;
}
if (retries >= 5)
dev_err(&client->dev, "init external watchdog failed!");
return 0;
}
/*******************************************************
Function:
Esd protect function.
Added external watchdog by meta, 2013/03/07
Input:
work: delayed work
Output:
None.
*******************************************************/
static void gtp_esd_check_func(struct work_struct *work)
{
s32 i;
s32 ret = -1;
struct goodix_ts_data *ts = NULL;
u8 test[4] = {0x80, 0x40};
ts = i2c_get_clientdata(i2c_connect_client);
if (ts->gtp_is_suspend) {
dev_dbg(&ts->client->dev, "Esd terminated!\n");
ts->esd_running = 0;
return;
}
#ifdef CONFIG_GT9XX_TOUCHPANEL_UPDATE
if (ts->enter_update)
return;
#endif
for (i = 0; i < 3; i++) {
ret = gtp_i2c_read(ts->client, test, 4);
if ((ret < 0)) {
/* IC works abnormally..*/
continue;
} else {
if ((test[2] == 0xAA) || (test[3] != 0xAA)) {
/* IC works abnormally..*/
i = 3;
break;
} else {
/* IC works normally, Write 0x8040 0xAA*/
test[2] = 0xAA;
gtp_i2c_write(ts->client, test, 3);
break;
}
}
}
if (i >= 3) {
dev_err(&ts->client->dev,
"IC Working ABNORMALLY, Resetting Guitar...\n");
gtp_reset_guitar(ts, 50);
}
if (!ts->gtp_is_suspend)
queue_delayed_work(gtp_esd_check_workqueue,
&gtp_esd_check_work, GTP_ESD_CHECK_CIRCLE);
else {
dev_dbg(&ts->client->dev, "Esd terminated!\n");
ts->esd_running = 0;
}
return;
}
#endif
static const struct i2c_device_id goodix_ts_id[] = {
{ GTP_I2C_NAME, 0 },
{ }
};
static struct of_device_id goodix_match_table[] = {
{ .compatible = "goodix,gt9xx", },
{ },
};
static struct i2c_driver goodix_ts_driver = {
.probe = goodix_ts_probe,
.remove = goodix_ts_remove,
#ifdef CONFIG_HAS_EARLYSUSPEND
.suspend = goodix_ts_early_suspend,
.resume = goodix_ts_late_resume,
#endif
.id_table = goodix_ts_id,
.driver = {
.name = GTP_I2C_NAME,
.owner = THIS_MODULE,
.of_match_table = goodix_match_table,
},
};
/*******************************************************
Function:
Driver Install function.
Input:
None.
Output:
Executive Outcomes. 0---succeed.
********************************************************/
static int __devinit goodix_ts_init(void)
{
int ret;
#if GTP_ESD_PROTECT
INIT_DELAYED_WORK(&gtp_esd_check_work, gtp_esd_check_func);
gtp_esd_check_workqueue = create_workqueue("gtp_esd_check");
#endif
ret = i2c_add_driver(&goodix_ts_driver);
return ret;
}
/*******************************************************
Function:
Driver uninstall function.
Input:
None.
Output:
Executive Outcomes. 0---succeed.
********************************************************/
static void __exit goodix_ts_exit(void)
{
i2c_del_driver(&goodix_ts_driver);
}
late_initcall(goodix_ts_init);
module_exit(goodix_ts_exit);
MODULE_DESCRIPTION("GTP Series Driver");
MODULE_LICENSE("GPL");