OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros
The CLKCTRL register was accessed using an absolute address.
The usage of hardcoded macros to calculate virtual address from physical
one should be avoided as much as possible.
The usage of a offset will allow future improvement like migration from
the current architecture code toward a module driver.
Update cm_xxx accessor, move definition to the proper header file and
update copyrights.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Todd Poynor <toddpoynor@google.com>
[paul@pwsan.com: renamed 'omap4_cm_' fns to 'omap4_cminst_'; removed empty
fn prototype section from cm44xx.h; incorporated comments from Todd;
documented some functions]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 0b87ec8..3380bee 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -1,7 +1,7 @@
/*
* OMAP4 Clock Management (CM) definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
@@ -23,10 +23,4 @@
#define OMAP4_CM_CLKSTCTRL 0x0000
#define OMAP4_CM_STATICDEP 0x0004
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-
-# endif
#endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index a482bfa..9033dd4 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -2,6 +2,7 @@
* OMAP4 CM instance functions
*
* Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
@@ -32,6 +33,22 @@
#include "prm44xx.h"
#include "prcm_mpu44xx.h"
+/*
+ * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
+ *
+ * 0x0 func: Module is fully functional, including OCP
+ * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
+ * abortion
+ * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
+ * using separate functional clock
+ * 0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+#define CLKCTRL_IDLEST_FUNCTIONAL 0x0
+#define CLKCTRL_IDLEST_INTRANSITION 0x1
+#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2
+#define CLKCTRL_IDLEST_DISABLED 0x3
+
static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
[OMAP4430_INVALID_PRCM_PARTITION] = 0,
[OMAP4430_PRM_PARTITION] = OMAP4430_PRM_BASE,
@@ -41,6 +58,48 @@
[OMAP4430_PRCM_MPU_PARTITION] = OMAP4430_PRCM_MPU_BASE,
};
+/* Private functions */
+
+/**
+ * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
+ * bit 0.
+ */
+static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
+ v &= OMAP4430_IDLEST_MASK;
+ v >>= OMAP4430_IDLEST_SHIFT;
+ return v;
+}
+
+/**
+ * _is_module_ready - can module registers be accessed without causing an abort?
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ *
+ * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
+ * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
+ */
+static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+{
+ u32 v;
+
+ v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
+
+ return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
+ v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
+}
+
+/* Public functions */
+
/* Read a register in a CM instance */
u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
@@ -200,35 +259,27 @@
*/
/**
- * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
- * @clkctrl_reg: CLKCTRL module address
+ * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
+ * @part: PRCM partition ID that the CM_CLKCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Wait for the module IDLEST to be functional. If the idle state is in any
* the non functional state (trans, idle or disabled), module and thus the
* sysconfig cannot be accessed and will probably lead to an "imprecise
* external abort"
- *
- * Module idle state:
- * 0x0 func: Module is fully functional, including OCP
- * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
- * abortion
- * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
- * using separate functional clock
- * 0x3 disabled: Module is disabled and cannot be accessed
- *
*/
-int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
+int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
{
int i = 0;
- if (!clkctrl_reg)
+ if (!clkctrl_offs)
return 0;
- omap_test_timeout((
- ((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) ||
- (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >>
- OMAP4430_IDLEST_SHIFT) == 0x2)),
- MAX_MODULE_READY_TIME, i);
+ omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
+ MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index 2b32c18..8eba2ae 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -17,6 +17,8 @@
extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
+
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly
@@ -32,6 +34,4 @@
extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
u32 mask);
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-
#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 1f6f47f..00241ea 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -146,7 +146,7 @@
#include <plat/prcm.h>
#include "cm2xxx_3xxx.h"
-#include "cm44xx.h"
+#include "cminst44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "mux.h"
@@ -1060,7 +1060,7 @@
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully leaves
* slave idle; otherwise, pass along the return value of the
- * appropriate *_cm_wait_module_ready() function.
+ * appropriate *_cm*_wait_module_ready() function.
*/
static int _wait_target_ready(struct omap_hwmod *oh)
{
@@ -1087,7 +1087,13 @@
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
} else if (cpu_is_omap44xx()) {
- ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg);
+ if (!oh->clkdm)
+ return -EINVAL;
+
+ ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
} else {
BUG();
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index becae45..00d7130 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -124,6 +124,11 @@
.name = "dmm",
.class = &omap44xx_dmm_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
.mpu_irqs = omap44xx_dmm_irqs,
@@ -175,6 +180,11 @@
.name = "emif_fw",
.class = &omap44xx_emif_fw_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -215,6 +225,11 @@
.name = "l3_instr",
.class = &omap44xx_l3_hwmod_class,
.clkdm_name = "l3_instr_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -309,6 +324,11 @@
.class = &omap44xx_l3_hwmod_class,
.clkdm_name = "l3_1_clkdm",
.mpu_irqs = omap44xx_l3_main_1_irqs,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -405,6 +425,11 @@
.name = "l3_main_2",
.class = &omap44xx_l3_hwmod_class,
.clkdm_name = "l3_2_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -456,6 +481,11 @@
.name = "l3_main_3",
.class = &omap44xx_l3_hwmod_class,
.clkdm_name = "l3_instr_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -514,6 +544,11 @@
.name = "l4_abe",
.class = &omap44xx_l4_hwmod_class,
.clkdm_name = "abe_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -537,6 +572,11 @@
.name = "l4_cfg",
.class = &omap44xx_l4_hwmod_class,
.clkdm_name = "l4_cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -560,6 +600,11 @@
.name = "l4_per",
.class = &omap44xx_l4_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -583,6 +628,11 @@
.name = "l4_wkup",
.class = &omap44xx_l4_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
+ },
+ },
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -758,7 +808,7 @@
.main_clk = "aess_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_aess_slaves,
@@ -788,7 +838,7 @@
.clkdm_name = "l4_wkup_clkdm",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET,
},
},
.opt_clks = bandgap_opt_clks,
@@ -848,7 +898,7 @@
.main_clk = "sys_32k_ck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_counter_32k_slaves,
@@ -932,7 +982,7 @@
.main_clk = "l3_div_ck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_SDMA_SDMA_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET,
},
},
.dev_attr = &dma_dev_attr,
@@ -1026,7 +1076,7 @@
.main_clk = "dmic_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_dmic_slaves,
@@ -1110,7 +1160,7 @@
.main_clk = "dsp_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
.rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
},
},
@@ -1199,7 +1249,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.opt_clks = dss_opt_clks,
@@ -1303,7 +1353,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.opt_clks = dss_dispc_opt_clks,
@@ -1401,7 +1451,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.opt_clks = dss_dsi1_opt_clks,
@@ -1478,7 +1528,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.opt_clks = dss_dsi2_opt_clks,
@@ -1575,7 +1625,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.opt_clks = dss_hdmi_opt_clks,
@@ -1666,7 +1716,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.opt_clks = dss_rfbi_opt_clks,
@@ -1736,7 +1786,7 @@
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_dss_venc_slaves,
@@ -1815,7 +1865,7 @@
.main_clk = "gpio1_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET,
},
},
.opt_clks = gpio1_opt_clks,
@@ -1869,7 +1919,7 @@
.main_clk = "gpio2_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET,
},
},
.opt_clks = gpio2_opt_clks,
@@ -1923,7 +1973,7 @@
.main_clk = "gpio3_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET,
},
},
.opt_clks = gpio3_opt_clks,
@@ -1977,7 +2027,7 @@
.main_clk = "gpio4_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET,
},
},
.opt_clks = gpio4_opt_clks,
@@ -2031,7 +2081,7 @@
.main_clk = "gpio5_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET,
},
},
.opt_clks = gpio5_opt_clks,
@@ -2085,7 +2135,7 @@
.main_clk = "gpio6_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET,
},
},
.opt_clks = gpio6_opt_clks,
@@ -2164,7 +2214,7 @@
.main_clk = "hsi_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_hsi_slaves,
@@ -2247,7 +2297,7 @@
.main_clk = "i2c1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_i2c1_slaves,
@@ -2302,7 +2352,7 @@
.main_clk = "i2c2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_i2c2_slaves,
@@ -2357,7 +2407,7 @@
.main_clk = "i2c3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_i2c3_slaves,
@@ -2412,7 +2462,7 @@
.main_clk = "i2c4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_i2c4_slaves,
@@ -2508,7 +2558,7 @@
.main_clk = "ipu_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
.rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
},
},
@@ -2595,7 +2645,7 @@
.main_clk = "iss_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_CAM_ISS_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET,
},
},
.opt_clks = iss_opt_clks,
@@ -2708,7 +2758,7 @@
.main_clk = "iva_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET,
.rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
},
},
@@ -2779,7 +2829,7 @@
.main_clk = "kbd_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_kbd_slaves,
@@ -2844,7 +2894,7 @@
.mpu_irqs = omap44xx_mailbox_irqs,
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mailbox_slaves,
@@ -2937,7 +2987,7 @@
.main_clk = "mcbsp1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mcbsp1_slaves,
@@ -3011,7 +3061,7 @@
.main_clk = "mcbsp2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mcbsp2_slaves,
@@ -3085,7 +3135,7 @@
.main_clk = "mcbsp3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mcbsp3_slaves,
@@ -3138,7 +3188,7 @@
.main_clk = "mcbsp4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mcbsp4_slaves,
@@ -3231,7 +3281,7 @@
.main_clk = "mcpdm_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mcpdm_slaves,
@@ -3317,7 +3367,7 @@
.main_clk = "mcspi1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
},
},
.dev_attr = &mcspi1_dev_attr,
@@ -3378,7 +3428,7 @@
.main_clk = "mcspi2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
},
},
.dev_attr = &mcspi2_dev_attr,
@@ -3439,7 +3489,7 @@
.main_clk = "mcspi3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
},
},
.dev_attr = &mcspi3_dev_attr,
@@ -3498,7 +3548,7 @@
.main_clk = "mcspi4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
},
},
.dev_attr = &mcspi4_dev_attr,
@@ -3583,7 +3633,7 @@
.main_clk = "mmc1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET,
},
},
.dev_attr = &mmc1_dev_attr,
@@ -3643,7 +3693,7 @@
.main_clk = "mmc2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mmc2_slaves,
@@ -3698,7 +3748,7 @@
.main_clk = "mmc3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mmc3_slaves,
@@ -3752,7 +3802,7 @@
.main_clk = "mmc4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mmc4_slaves,
@@ -3805,7 +3855,7 @@
.main_clk = "mmc5_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_mmc5_slaves,
@@ -3846,7 +3896,7 @@
.main_clk = "dpll_mpu_m2_ck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET,
},
},
.masters = omap44xx_mpu_masters,
@@ -3920,7 +3970,7 @@
.vdd_name = "core",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_smartreflex_core_slaves,
@@ -3967,7 +4017,7 @@
.vdd_name = "iva",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_smartreflex_iva_slaves,
@@ -4014,7 +4064,7 @@
.vdd_name = "mpu",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_smartreflex_mpu_slaves,
@@ -4076,7 +4126,7 @@
.clkdm_name = "l4_cfg_clkdm",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_spinlock_slaves,
@@ -4160,7 +4210,7 @@
.main_clk = "timer1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer1_slaves,
@@ -4206,7 +4256,7 @@
.main_clk = "timer2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer2_slaves,
@@ -4252,7 +4302,7 @@
.main_clk = "timer3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer3_slaves,
@@ -4298,7 +4348,7 @@
.main_clk = "timer4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer4_slaves,
@@ -4363,7 +4413,7 @@
.main_clk = "timer5_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer5_slaves,
@@ -4429,7 +4479,7 @@
.main_clk = "timer6_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer6_slaves,
@@ -4494,7 +4544,7 @@
.main_clk = "timer7_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer7_slaves,
@@ -4559,7 +4609,7 @@
.main_clk = "timer8_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer8_slaves,
@@ -4605,7 +4655,7 @@
.main_clk = "timer9_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer9_slaves,
@@ -4651,7 +4701,7 @@
.main_clk = "timer10_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer10_slaves,
@@ -4697,7 +4747,7 @@
.main_clk = "timer11_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_timer11_slaves,
@@ -4772,7 +4822,7 @@
.main_clk = "uart1_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_uart1_slaves,
@@ -4825,7 +4875,7 @@
.main_clk = "uart2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_uart2_slaves,
@@ -4879,7 +4929,7 @@
.main_clk = "uart3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_uart3_slaves,
@@ -4932,7 +4982,7 @@
.main_clk = "uart4_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_uart4_slaves,
@@ -5011,7 +5061,7 @@
.main_clk = "usb_otg_hs_ick",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET,
},
},
.opt_clks = usb_otg_hs_opt_clks,
@@ -5084,7 +5134,7 @@
.main_clk = "wd_timer2_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_wd_timer2_slaves,
@@ -5149,7 +5199,7 @@
.main_clk = "wd_timer3_fck",
.prcm = {
.omap4 = {
- .clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+ .clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
},
},
.slaves = omap44xx_wd_timer3_slaves,
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 3306bdf..fc54355 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -360,7 +360,7 @@
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
- void __iomem *clkctrl_reg;
+ u16 clkctrl_offs;
void __iomem *rstctrl_reg;
u8 submodule_wkdep_bit;
};