Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
ipv6: Don't pass invalid dst_entry pointer to dst_release().
mlx4: fix kfree on error path in new_steering_entry()
tcp: len check is unnecessarily devastating, change to WARN_ON
sctp: malloc enough room for asconf-ack chunk
sctp: fix auth_hmacs field's length of struct sctp_cookie
net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM
usbnet: use eth%d name for known ethernet devices
starfire: clean up dma_addr_t size test
iwlegacy: fix bugs in change_interface
carl9170: Fix tx aggregation problems with some clients
iwl3945: disable hw scan by default
wireless: rt2x00: rt2800usb.c add and identify ids
iwl3945: do not deprecate software scan
mac80211: fix aggregation frame release during timeout
cfg80211: fix BSS double-unlinking (continued)
cfg80211:: fix possible NULL pointer dereference
mac80211: fix possible NULL pointer dereference
mac80211: fix NULL pointer dereference in ieee80211_key_alloc()
ath9k: fix a chip wakeup related crash in ath9k_start
mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS rates
...
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index f607367..c17cd4b 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -206,8 +206,8 @@
- directory with laptop related info and laptop driver documentation.
ldm.txt
- a brief description of LDM (Windows Dynamic Disks).
-leds-class.txt
- - documents LED handling under Linux.
+leds/
+ - directory with info about LED handling under Linux.
local_ops.txt
- semantics and behavior of local atomic operations.
lockdep-design.txt
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index b4c4f15..3ca3971 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -40,7 +40,7 @@
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile holds informations like button
+ press of a button. A profile holds information like button
mappings, sensitivity, the colors of the 5 leds and light
effects.
When read, these files return the respective profile. The
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index 00efced..326e054 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -33,7 +33,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_buttons holds informations about button layout.
+ profile_buttons holds information about button layout.
When written, this file lets one write the respective profile
buttons back to the mouse. The data has to be 77 bytes long.
The mouse will reject invalid data.
@@ -47,7 +47,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_buttons holds informations about button layout.
+ profile_buttons holds information about button layout.
When read, these files return the respective profile buttons.
The returned data is 77 bytes in size.
This file is readonly.
@@ -58,7 +58,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_settings holds informations like resolution, sensitivity
+ profile_settings holds information like resolution, sensitivity
and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 43 bytes long.
@@ -73,7 +73,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_settings holds informations like resolution, sensitivity
+ profile_settings holds information like resolution, sensitivity
and light effects.
When read, these files return the respective profile settings.
The returned data is 43 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index fdfa16f..20f937c 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -52,7 +52,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_buttons holds informations about button layout.
+ profile_buttons holds information about button layout.
When written, this file lets one write the respective profile
buttons back to the mouse. The data has to be 23 bytes long.
The mouse will reject invalid data.
@@ -66,7 +66,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_buttons holds informations about button layout.
+ profile_buttons holds information about button layout.
When read, these files return the respective profile buttons.
The returned data is 23 bytes in size.
This file is readonly.
@@ -77,7 +77,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_settings holds informations like resolution, sensitivity
+ profile_settings holds information like resolution, sensitivity
and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 16 bytes long.
@@ -92,7 +92,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_settings holds informations like resolution, sensitivity
+ profile_settings holds information like resolution, sensitivity
and light effects.
When read, these files return the respective profile settings.
The returned data is 16 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 5fab71a..3f8de50 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -39,7 +39,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_settings holds informations like resolution, sensitivity
+ profile_settings holds information like resolution, sensitivity
and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 13 bytes long.
@@ -54,7 +54,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_settings holds informations like resolution, sensitivity
+ profile_settings holds information like resolution, sensitivity
and light effects.
When read, these files return the respective profile settings.
The returned data is 13 bytes in size.
@@ -66,7 +66,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_buttons holds informations about button layout.
+ profile_buttons holds information about button layout.
When written, this file lets one write the respective profile
buttons back to the mouse. The data has to be 19 bytes long.
The mouse will reject invalid data.
@@ -80,7 +80,7 @@
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split in settings and buttons.
- profile_buttons holds informations about button layout.
+ profile_buttons holds information about button layout.
When read, these files return the respective profile buttons.
The returned data is 19 bytes in size.
This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 41ff8ae..cd9d667 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -27,7 +27,7 @@
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Some models like the W1N have a LED display that can be
- used to display several informations.
+ used to display several items of information.
To control the LED display, use the following :
echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
where T control the 3 letters display, and DDD the 3 digits display.
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index cbdfb7d..aedf1bd 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -110,22 +110,22 @@
tasks etc. The resource planning for this server could be along the
following lines:
- CPU : Top cpuset
+ CPU : "Top cpuset"
/ \
CPUSet1 CPUSet2
- | |
- (Profs) (Students)
+ | |
+ (Professors) (Students)
In addition (system tasks) are attached to topcpuset (so
that they can run anywhere) with a limit of 20%
- Memory : Professors (50%), students (30%), system (20%)
+ Memory : Professors (50%), Students (30%), system (20%)
- Disk : Prof (50%), students (30%), system (20%)
+ Disk : Professors (50%), Students (30%), system (20%)
Network : WWW browsing (20%), Network File System (60%), others (20%)
/ \
- Prof (15%) students (5%)
+ Professors (15%) students (5%)
Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go
into NFS network class.
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 55fd262..50619a0 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -138,7 +138,7 @@
section III, but, for example, the kernel does not require you to
create a node for every PCI device in the system. It is a requirement
to have a node for PCI host bridges in order to provide interrupt
-routing informations and memory/IO ranges, among others. It is also
+routing information and memory/IO ranges, among others. It is also
recommended to define nodes for on chip devices and other buses that
don't specifically fit in an existing OF specification. This creates a
great flexibility in the way the kernel can then probe those and match
@@ -385,7 +385,7 @@
among others, by kexec. If you are on an SMP system, this value
should match the content of the "reg" property of the CPU node in
the device-tree corresponding to the CPU calling the kernel entry
- point (see further chapters for more informations on the required
+ point (see further chapters for more information on the required
device-tree contents)
- size_dt_strings
@@ -553,7 +553,7 @@
This tree is almost a minimal tree. It pretty much contains the
minimal set of required nodes and properties to boot a linux kernel;
-that is, some basic model informations at the root, the CPUs, and the
+that is, some basic model information at the root, the CPUs, and the
physical memory layout. It also includes misc information passed
through /chosen, like in this example, the platform type (mandatory)
and the kernel command line arguments (optional).
diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt
index 68ee224..412305b 100644
--- a/Documentation/dvb/udev.txt
+++ b/Documentation/dvb/udev.txt
@@ -1,7 +1,7 @@
The DVB subsystem currently registers to the sysfs subsystem using the
"class_simple" interface.
-This means that only the basic informations like module loading parameters
+This means that only the basic information like module loading parameters
are presented through sysfs. Other things that might be interesting are
currently *not* available.
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 9ee774d..ccc07c2 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -311,7 +311,7 @@
'ce_noinfo_count'
This attribute file displays the number of CEs that
- have occurred wherewith no informations as to which DIMM slot
+ have occurred wherewith no information as to which DIMM slot
is having errors. Memory is handicapped, but operational,
yet no information is available to indicate which slot
the failing memory is in. This count field should be also
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c357a31..d2b5150 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1832,15 +1832,17 @@
perfmon on Intel CPUs instead of the
CPU specific event set.
- oops=panic Always panic on oopses. Default is to just kill the process,
- but there is a small probability of deadlocking the machine.
+ oops=panic Always panic on oopses. Default is to just kill the
+ process, but there is a small probability of
+ deadlocking the machine.
This will also cause panics on machine check exceptions.
Useful together with panic=30 to trigger a reboot.
OSS [HW,OSS]
See Documentation/sound/oss/oss-parameters.txt
- panic= [KNL] Kernel behaviour on panic
+ panic= [KNL] Kernel behaviour on panic: delay <timeout>
+ seconds before rebooting
Format: <timeout>
parkbd.port= [HW] Parallel port number the keyboard adapter is
@@ -2343,6 +2345,7 @@
softlockup_panic=
[KNL] Should the soft-lockup detector generate panics.
+ Format: <integer>
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
@@ -2475,8 +2478,8 @@
topology= [S390]
Format: {off | on}
Specify if the kernel should make use of the cpu
- topology informations if the hardware supports these.
- The scheduler will make use of these informations and
+ topology information if the hardware supports this.
+ The scheduler will make use of this information and
e.g. base its process migration decisions on it.
Default is on.
@@ -2529,8 +2532,7 @@
reported either.
unknown_nmi_panic
- [X86]
- Set unknown_nmi_panic=1 early on boot.
+ [X86] Cause panic on unknown NMI.
usbcore.autosuspend=
[USB] The autosuspend time delay (in seconds) used
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 34f6638..090e6ee 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -11,6 +11,7 @@
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
user-space applications.
+Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
Usage
-----
@@ -178,5 +179,4 @@
the pointer is calculated by other methods than the usual container_of
macro or the pointer is stored in a location not scanned by kmemleak.
-Page allocations and ioremap are not tracked. Only the ARM and x86
-architectures are currently supported.
+Page allocations and ioremap are not tracked.
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index c1c5be8..803e51f 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -61,7 +61,7 @@
Hotkeys are also reported as input keys (like keyboards) you can check
which key are supported using "xev" under X11.
- You can get informations on the version of your DSDT table by reading the
+ You can get information on the version of your DSDT table by reading the
/sys/devices/platform/asus-laptop/infos entry. If you have a question or a
bug report to do, please include the output of this entry.
@@ -178,7 +178,7 @@
-----------
Some models like the W1N have a LED display that can be used to display
- several informations.
+ several items of information.
LED display works for the following models:
W1000N
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
new file mode 100644
index 0000000..29f481d
--- /dev/null
+++ b/Documentation/leds/00-INDEX
@@ -0,0 +1,8 @@
+leds-class.txt
+ - documents LED handling under Linux.
+leds-lp3944.txt
+ - notes on how to use the leds-lp3944 driver.
+leds-lp5521.txt
+ - notes on how to use the leds-lp5521 driver.
+leds-lp5523.txt
+ - notes on how to use the leds-lp5523 driver.
diff --git a/Documentation/leds-class.txt b/Documentation/leds/leds-class.txt
similarity index 99%
rename from Documentation/leds-class.txt
rename to Documentation/leds/leds-class.txt
index 58b266b..4996586 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -95,4 +95,3 @@
particular LED (ACPI?). The addition of triggers provided by the LED driver
should cover this option and be possible to add without breaking the
current interface.
-
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt
similarity index 100%
rename from Documentation/leds-lp3944.txt
rename to Documentation/leds/leds-lp3944.txt
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 18afcd8..ee496eb 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -72,7 +72,7 @@
# fragmentation gw_sel_class vis_mode
-There is a special folder for debugging informations:
+There is a special folder for debugging information:
# ls /sys/kernel/debug/batman_adv/bat0/
# gateways socket transtable_global vis_data
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 86f9f74..efe998b 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -2273,7 +2273,7 @@
There is a lot of useful info in here best found by going in & having a look around,
so I'll take you through some entries I consider important.
-All the processes running on the machine have there own entry defined by
+All the processes running on the machine have their own entry defined by
/proc/<pid>
So lets have a look at the init process
cd /proc/1
diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.txt
index 373ceac..b7ee379 100644
--- a/Documentation/scheduler/sched-domains.txt
+++ b/Documentation/scheduler/sched-domains.txt
@@ -1,8 +1,7 @@
-Each CPU has a "base" scheduling domain (struct sched_domain). These are
-accessed via cpu_sched_domain(i) and this_sched_domain() macros. The domain
+Each CPU has a "base" scheduling domain (struct sched_domain). The domain
hierarchy is built from these base domains via the ->parent pointer. ->parent
-MUST be NULL terminated, and domain structures should be per-CPU as they
-are locklessly updated.
+MUST be NULL terminated, and domain structures should be per-CPU as they are
+locklessly updated.
Each scheduling domain spans a number of CPUs (stored in the ->span field).
A domain's span MUST be a superset of it child's span (this restriction could
@@ -26,11 +25,26 @@
load of each of its member CPUs, and only when the load of a group becomes
out of balance are tasks moved between groups.
-In kernel/sched.c, rebalance_tick is run periodically on each CPU. This
-function takes its CPU's base sched domain and checks to see if has reached
-its rebalance interval. If so, then it will run load_balance on that domain.
-rebalance_tick then checks the parent sched_domain (if it exists), and the
-parent of the parent and so forth.
+In kernel/sched.c, trigger_load_balance() is run periodically on each CPU
+through scheduler_tick(). It raises a softirq after the next regularly scheduled
+rebalancing event for the current runqueue has arrived. The actual load
+balancing workhorse, run_rebalance_domains()->rebalance_domains(), is then run
+in softirq context (SCHED_SOFTIRQ).
+
+The latter function takes two arguments: the current CPU and whether it was idle
+at the time the scheduler_tick() happened and iterates over all sched domains
+our CPU is on, starting from its base domain and going up the ->parent chain.
+While doing that, it checks to see if the current domain has exhausted its
+rebalance interval. If so, it runs load_balance() on that domain. It then checks
+the parent sched_domain (if it exists), and the parent of the parent and so
+forth.
+
+Initially, load_balance() finds the busiest group in the current sched domain.
+If it succeeds, it looks for the busiest runqueue of all the CPUs' runqueues in
+that group. If it manages to find such a runqueue, it locks both our initial
+CPU's runqueue and the newly found busiest one and starts moving tasks from it
+to our runqueue. The exact number of tasks amounts to an imbalance previously
+computed while iterating over this sched domain's groups.
*** Implementing sched domains ***
The "base" domain will "span" the first level of the hierarchy. In the case
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 6f63b79..6af8f7a 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -285,7 +285,7 @@
7. Profiling information
-This driver does not provide profiling informations as did its predecessors.
+This driver does not provide profiling information as did its predecessors.
This feature was not this useful and added complexity to the code.
As the driver code got more complex, I have decided to remove everything
that didn't seem actually useful.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3c1eddd..181ba5b 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -2229,7 +2229,7 @@
/proc/asound/card#/pcm#[cp]/oss
-------------------------------
- String "erase" - erase all additional informations about OSS applications
+ String "erase" - erase all additional information about OSS applications
String "<app_name> <fragments> <fragment_size> [<options>]"
<app_name> - name of application with (higher priority) or without path
diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
index c0f0892..e0dc064 100644
--- a/Documentation/sound/oss/AudioExcelDSP16
+++ b/Documentation/sound/oss/AudioExcelDSP16
@@ -1,10 +1,10 @@
Driver
------
-Informations about Audio Excel DSP 16 driver can be found in the source
+Information about Audio Excel DSP 16 driver can be found in the source
file aedsp16.c
Please, read the head of the source before using it. It contain useful
-informations.
+information.
Configuration
-------------
@@ -68,7 +68,7 @@
This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
I'm working on the III version of the card: if someone have useful
-informations about it, please let me know.
+information about it, please let me know.
For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
activating the audio card with the MS-DOS device driver, then you have to
<ctrl>-<alt>-<del> and boot Linux.
diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb
index af8a7d3..b6b7790 100644
--- a/Documentation/sound/oss/README.ymfsb
+++ b/Documentation/sound/oss/README.ymfsb
@@ -5,7 +5,7 @@
============
This code references YAMAHA's sample codes and data sheets.
- I respect and thank for all people they made open the informations
+ I respect and thank for all people they made open the information
about YMF7xx cards.
And this codes heavily based on Jeff Garzik <jgarzik@pobox.com>'s
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index bbe3ed6..14c065fa 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -1,5 +1,5 @@
-Note: "modinfo <module>" prints various informations about a kernel
+Note: "modinfo <module>" prints various information about a kernel
module, among them a complete and up-to-date list of insmod options.
This list tends to be outdated because it is updated manually ...
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index 1e6328f..bc5e41d 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -8,7 +8,7 @@
sound is handled in slightly different ways on each board.
To handle the grabber boards correctly, there is a array tvcards[] in
-bttv-cards.c, which holds the informations required for each board.
+bttv-cards.c, which holds the information required for each board.
Sound will work only, if the correct entry is used (for video it often
makes no difference). The bttv driver prints a line to the kernel
log, telling which card type is used. Like this one:
diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index 1247566..e0cdae4 100644
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -191,10 +191,10 @@
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
1 = critical errors
- 2 = significant informations
+ 2 = significant information
3 = more verbose messages
Level 3 is useful for testing only, when only one device
- is used at the same time. It also shows some more informations
+ is used at the same time. It also shows some more information
about the hardware being detected. This module parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 73de4050..b4f6704 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -214,10 +214,10 @@
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
1 = critical errors
- 2 = significant informations
+ 2 = significant information
3 = more verbose messages
Level 3 is useful for testing only. It also shows some more
- informations about the hardware being detected.
+ information about the hardware being detected.
This parameter can be changed at runtime thanks to the /sys
filesystem interface.
Default: 2
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index 05138e8..9649450 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -413,7 +413,7 @@
Description: Debugging information level, from 0 to 6:
0 = none (use carefully)
1 = critical errors
- 2 = significant informations
+ 2 = significant information
3 = configuration or general messages
4 = warnings
5 = called functions
diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt
index befdfda..b41c83c 100644
--- a/Documentation/video4linux/zc0301.txt
+++ b/Documentation/video4linux/zc0301.txt
@@ -181,10 +181,10 @@
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
1 = critical errors
- 2 = significant informations
+ 2 = significant information
3 = more verbose messages
Level 3 is useful for testing only, when only one device
- is used at the same time. It also shows some more informations
+ is used at the same time. It also shows some information
about the hardware being detected. This module parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
@@ -261,7 +261,7 @@
11. Credits
===========
-- Informations about the chip internals needed to enable the I2C protocol have
+- Information about the chip internals needed to enable the I2C protocol have
been taken from the documentation of the ZC030x Video4Linux1 driver written
by Andrew Birkett <andy@nobugs.org>;
- The initialization values of the ZC0301 controller connected to the PAS202BCB
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index bd4160c..9808998 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -12,7 +12,6 @@
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
- select GENERIC_HARDIRQS_NO_DEPRECATED
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7c0effb..5b9f78b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -366,6 +366,7 @@
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select HAVE_SCHED_CLOCK
help
Support for Freescale MXC/iMX-based family of processors
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 84ac4d6..adf583c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -21,20 +21,12 @@
#if defined(CONFIG_DEBUG_ICEDCC)
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
-#elif defined(CONFIG_CPU_V7)
- .macro loadsp, rb, tmp
- .endm
- .macro writeb, ch, rb
-wait: mrc p14, 0, pc, c0, c1, 0
- bcs wait
- mcr p14, 0, \ch, c0, c5, 0
- .endm
#elif defined(CONFIG_CPU_XSCALE)
.macro loadsp, rb, tmp
.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 4657e87..2df3826 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -36,7 +36,7 @@
#ifdef CONFIG_DEBUG_ICEDCC
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
static void icedcc_putc(int ch)
{
@@ -52,16 +52,6 @@
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
-#elif defined(CONFIG_CPU_V7)
-
-static void icedcc_putc(int ch)
-{
- asm(
- "wait: mrc p14, 0, pc, c0, c1, 0 \n\
- bcs wait \n\
- mcr p14, 0, %0, c0, c5, 0 "
- : : "r" (ch));
-}
#elif defined(CONFIG_CPU_XSCALE)
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 833306e..ea297ac 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -20,8 +20,6 @@
* VBUS IRQ and omit the methods above. Store the GPIO number
* here. Note that sometimes the signals go through inverters...
*/
- bool gpio_vbus_inverted;
- int gpio_vbus; /* high == vbus present */
bool gpio_pullup_inverted;
int gpio_pullup; /* high == pullup activated */
};
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index d2d983b..bcd66e0 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -25,7 +25,7 @@
.macro addruart, rp, rv
.endm
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
@@ -49,23 +49,6 @@
1002:
.endm
-#elif defined(CONFIG_CPU_V7)
-
- .macro senduart, rd, rx
- mcr p14, 0, \rd, c0, c5, 0
- .endm
-
- .macro busyuart, rd, rx
-busy: mrc p14, 0, pc, c0, c1, 0
- bcs busy
- .endm
-
- .macro waituart, rd, rx
-wait: mrc p14, 0, pc, c0, c1, 0
- bcs wait
-
- .endm
-
#elif defined(CONFIG_CPU_XSCALE)
.macro senduart, rd, rx
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 052b509..1bec8b5 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -338,7 +338,7 @@
.fops = &etb_fops,
};
-static int __init etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
@@ -530,7 +530,7 @@
static struct kobj_attribute trace_mode_attr =
__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
-static int __init etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8f6ed43..2389131 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -594,7 +594,8 @@
long cpsr = regs->ARM_cpsr;
fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
- regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */
+ if (rn != 15)
+ regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */
rdv = fnr.r1;
if (rd == 15) {
@@ -622,10 +623,11 @@
long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn];
long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long rnv_wb;
- /* Save Rn in case of writeback. */
- regs->uregs[rn] =
- insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+ rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+ if (rn != 15)
+ regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */
}
static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 22e194eb..69cfee0 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -79,6 +79,7 @@
void (*write_counter)(int idx, u32 val);
void (*start)(void);
void (*stop)(void);
+ void (*reset)(void *);
const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
@@ -204,11 +205,9 @@
static u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
- int idx)
+ int idx, int overflow)
{
- int shift = 64 - 32;
- s64 prev_raw_count, new_raw_count;
- u64 delta;
+ u64 delta, prev_raw_count, new_raw_count;
again:
prev_raw_count = local64_read(&hwc->prev_count);
@@ -218,8 +217,13 @@
new_raw_count) != prev_raw_count)
goto again;
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
+ new_raw_count &= armpmu->max_period;
+ prev_raw_count &= armpmu->max_period;
+
+ if (overflow)
+ delta = armpmu->max_period - prev_raw_count + new_raw_count;
+ else
+ delta = new_raw_count - prev_raw_count;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
@@ -236,7 +240,7 @@
if (hwc->idx < 0)
return;
- armpmu_event_update(event, hwc, hwc->idx);
+ armpmu_event_update(event, hwc, hwc->idx, 0);
}
static void
@@ -254,7 +258,7 @@
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(hwc, hwc->idx);
barrier(); /* why? */
- armpmu_event_update(event, hwc, hwc->idx);
+ armpmu_event_update(event, hwc, hwc->idx, 0);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
@@ -624,6 +628,19 @@
#include "perf_event_v6.c"
#include "perf_event_v7.c"
+/*
+ * Ensure the PMU has sane values out of reset.
+ * This requires SMP to be available, so exists as a separate initcall.
+ */
+static int __init
+armpmu_reset(void)
+{
+ if (armpmu && armpmu->reset)
+ return on_each_cpu(armpmu->reset, NULL, 1);
+ return 0;
+}
+arch_initcall(armpmu_reset);
+
static int __init
init_hw_perf_events(void)
{
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 6fc2d22..f1e8dd9 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -474,7 +474,7 @@
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
+ armpmu_event_update(event, hwc, idx, 1);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 2e14025..4960686 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -466,6 +466,7 @@
static inline void armv7_pmnc_write(unsigned long val)
{
val &= ARMV7_PMNC_MASK;
+ isb();
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
}
@@ -502,6 +503,7 @@
val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+ isb();
return idx;
}
@@ -780,7 +782,7 @@
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
+ armpmu_event_update(event, hwc, idx, 1);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@@ -847,6 +849,18 @@
}
}
+static void armv7pmu_reset(void *info)
+{
+ u32 idx, nb_cnt = armpmu->num_events;
+
+ /* The counter and interrupt enable registers are unknown at reset. */
+ for (idx = 1; idx < nb_cnt; ++idx)
+ armv7pmu_disable_event(NULL, idx);
+
+ /* Initialize & Reset PMNC: C and P bits */
+ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+}
+
static struct arm_pmu armv7pmu = {
.handle_irq = armv7pmu_handle_irq,
.enable = armv7pmu_enable_event,
@@ -856,17 +870,15 @@
.get_event_idx = armv7pmu_get_event_idx,
.start = armv7pmu_start,
.stop = armv7pmu_stop,
+ .reset = armv7pmu_reset,
.raw_event_mask = 0xFF,
.max_period = (1LLU << 32) - 1,
};
-static u32 __init armv7_reset_read_pmnc(void)
+static u32 __init armv7_read_num_pmnc_events(void)
{
u32 nb_cnt;
- /* Initialize & Reset PMNC: C and P bits */
- armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
/* Read the nb of CNTx counters supported from PMNC */
nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
@@ -880,7 +892,7 @@
armv7pmu.name = "ARMv7 Cortex-A8";
armv7pmu.cache_map = &armv7_a8_perf_cache_map;
armv7pmu.event_map = &armv7_a8_perf_map;
- armv7pmu.num_events = armv7_reset_read_pmnc();
+ armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
@@ -890,7 +902,7 @@
armv7pmu.name = "ARMv7 Cortex-A9";
armv7pmu.cache_map = &armv7_a9_perf_cache_map;
armv7pmu.event_map = &armv7_a9_perf_map;
- armv7pmu.num_events = armv7_reset_read_pmnc();
+ armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
#else
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 28cd3b0..39affbe 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -246,7 +246,7 @@
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
+ armpmu_event_update(event, hwc, idx, 1);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@@ -578,7 +578,7 @@
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
+ armpmu_event_update(event, hwc, idx, 1);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index bfad698..6398ead 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -119,11 +119,19 @@
#else
ldr r0, sleep_save_sp @ stack phys addr
#endif
- msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+ setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
#ifdef MULTI_CPU
- ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn
+ @ load v:p, stack, return fn, resume fn
+ ARM( ldmia r0!, {r1, sp, lr, pc} )
+THUMB( ldmia r0!, {r1, r2, r3, r4} )
+THUMB( mov sp, r2 )
+THUMB( mov lr, r3 )
+THUMB( bx r4 )
#else
- ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn
+ @ load v:p, stack, return fn
+ ARM( ldmia r0!, {r1, sp, lr} )
+THUMB( ldmia r0!, {r1, r2, lr} )
+THUMB( mov sp, r2 )
b cpu_do_resume
#endif
ENDPROC(cpu_resume)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5eec099..56b930a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -255,6 +255,7 @@
bool "Vista Silicon i.MX27 Visstrim_m10"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_EHCI
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index cb705c2..6269053 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -34,6 +34,7 @@
#include <mach/mx25.h>
#include <mach/imx-uart.h>
#include <mach/audmux.h>
+#include <mach/esdhc.h>
#include "devices-imx25.h"
@@ -242,6 +243,11 @@
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
+static struct esdhc_platform_data sd1_pdata = {
+ .cd_gpio = GPIO_SD1CD,
+ .wp_gpio = -EINVAL,
+};
+
/*
* system init for baseboard usage. Will be called by cpuimx25 init.
*
@@ -275,7 +281,7 @@
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
- imx25_add_sdhci_esdhc_imx(0, NULL);
+ imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 0a95063..17de0bf 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -58,6 +58,12 @@
static struct gpio_led sheevaplug_led_pins[] = {
{
+ .name = "plug:red:misc",
+ .default_trigger = "none",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
.name = "plug:green:health",
.default_trigger = "default-on",
.gpio = 49,
@@ -80,6 +86,7 @@
static unsigned int sheevaplug_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED Red */
MPP49_GPIO, /* LED */
0
};
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 8076147..2e288b3 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -43,6 +43,7 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/audmux.h>
+#include <mach/esdhc.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -163,11 +164,14 @@
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ /* SD1 CD */
+ MX35_PAD_LD18__GPIO3_24,
};
#define GPIO_LED1 IMX_GPIO_NR(3, 29)
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR (4)
+#define GPIO_LCDPWR IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD IMX_GPIO_NR(3, 24)
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
@@ -254,6 +258,11 @@
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
+static struct esdhc_platform_data sd1_pdata = {
+ .cd_gpio = GPIO_SD1CD,
+ .wp_gpio = -EINVAL,
+};
+
/*
* system init for baseboard usage. Will be called by cpuimx35 init.
*
@@ -289,7 +298,7 @@
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx35_add_flexcan1(NULL);
- imx35_add_sdhci_esdhc_imx(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
@@ -301,7 +310,6 @@
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
- gpio_free(GPIO_LCDPWR);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index b3ecfb2..036ba1a 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -40,6 +40,7 @@
#include <mach/mx3fb.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
+#include <mach/esdhc.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -217,11 +218,15 @@
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
+ MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
};
#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_WP IMX_GPIO_NR(2, 23)
+#define SD1_GPIO_CD IMX_GPIO_NR(2, 24)
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
@@ -346,6 +351,11 @@
}
__setup("otg_mode=", pcm043_otg_mode);
+static struct esdhc_platform_data sd1_pdata = {
+ .wp_gpio = SD1_GPIO_WP,
+ .cd_gpio = SD1_GPIO_CD,
+};
+
/*
* Board specific initialization.
*/
@@ -395,7 +405,7 @@
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_flexcan1(NULL);
- imx35_add_sdhci_esdhc_imx(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
}
static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 83ee088..159340d 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -165,6 +165,7 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 4f63048..0b9338c 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,7 +3,7 @@
#
# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
+obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index b2ecd19..bea4e41 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -228,13 +228,12 @@
int ret;
/* reset FEC PHY */
- ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+ ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
+ GPIOF_OUT_INIT_LOW, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
- gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
- gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
msleep(1);
gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
}
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 7b5735c..2af3f43 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -34,7 +34,7 @@
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
@@ -82,15 +82,14 @@
int ret;
/* reset FEC PHY */
- ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+ ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+ "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- gpio_set_value(SMD_FEC_PHY_RST, 0);
msleep(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
+ gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_evk_fec_pdata = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0a18f8d..10a1bea 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -36,6 +36,9 @@
#include "crm_regs.h"
#include "devices-imx53.h"
+#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
+#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
+#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
static iomux_v3_cfg_t mx53_loco_pads[] = {
@@ -180,6 +183,27 @@
MX53_PAD_GPIO_8__GPIO1_8,
};
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
+{ \
+ .gpio = gpio_num, \
+ .type = EV_KEY, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+ .wakeup = wake, \
+}
+
+static const struct gpio_keys_button loco_buttons[] __initconst = {
+ GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
+ GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
+ GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data loco_button_data __initconst = {
+ .buttons = loco_buttons,
+ .nbuttons = ARRAY_SIZE(loco_buttons),
+};
+
static inline void mx53_loco_fec_reset(void)
{
int ret;
@@ -215,6 +239,7 @@
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(2, NULL);
+ imx_add_gpio_keys(&loco_button_data);
}
static void __init mx53_loco_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 652ace4..fdbc05e 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -865,6 +865,13 @@
.disable = _clk_ccgr_disable_inwait,
};
+static struct clk gpc_dvfs_clk = {
+ .enable_reg = MXC_CCM_CCGR5,
+ .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable,
+};
+
static struct clk gpt_32k_clk = {
.id = 0,
.parent = &ckil_clk,
@@ -1448,6 +1455,7 @@
_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+ _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
};
static struct clk_lookup mx53_lookups[] = {
@@ -1511,6 +1519,7 @@
clk_enable(&iim_clk);
mx51_revision();
clk_disable(&iim_clk);
+ mx51_display_revision();
/* move usb_phy_clk to 24MHz */
clk_set_parent(&usb_phy1_clk, &osc_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index df46b5e..472bdfa 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -21,6 +21,7 @@
static int cpu_silicon_rev = -1;
#define IIM_SREV 0x24
+#define MX50_HW_ADADIG_DIGPROG 0xB0
static int get_mx51_srev(void)
{
@@ -51,6 +52,26 @@
}
EXPORT_SYMBOL(mx51_revision);
+void mx51_display_revision(void)
+{
+ int rev;
+ char *srev;
+ rev = mx51_revision();
+
+ switch (rev) {
+ case IMX_CHIP_REVISION_2_0:
+ srev = IMX_CHIP_REVISION_2_0_STRING;
+ break;
+ case IMX_CHIP_REVISION_3_0:
+ srev = IMX_CHIP_REVISION_3_0_STRING;
+ break;
+ default:
+ srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+ }
+ printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx51_display_revision);
+
#ifdef CONFIG_NEON
/*
@@ -107,6 +128,44 @@
}
EXPORT_SYMBOL(mx53_revision);
+static int get_mx50_srev(void)
+{
+ void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
+ u32 rev;
+
+ if (!anatop) {
+ cpu_silicon_rev = -EINVAL;
+ return 0;
+ }
+
+ rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
+ rev &= 0xff;
+
+ iounmap(anatop);
+ if (rev == 0x0)
+ return IMX_CHIP_REVISION_1_0;
+ else if (rev == 0x1)
+ return IMX_CHIP_REVISION_1_1;
+ return 0;
+}
+
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx50
+ */
+int mx50_revision(void)
+{
+ if (!cpu_is_mx50())
+ return -EINVAL;
+
+ if (cpu_silicon_rev == -1)
+ cpu_silicon_rev = get_mx50_srev();
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx50_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index c372a43..e6c1119 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -67,6 +67,10 @@
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
+ /* SD1 CD */
+ _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
#define GPIO_LED1 IMX_GPIO_NR(3, 30)
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 868af8f..d0c7075 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -42,7 +42,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/mach-types.h>
#include "devices-imx51.h"
#include "devices.h"
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
new file mode 100644
index 0000000..76ae8dc
--- /dev/null
+++ b/arch/arm/mach-mx5/system.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include "crm_regs.h"
+
+/* set cpu low power mode before WFI instruction. This function is called
+ * mx5 because it can be used for mx50, mx51, and mx53.*/
+void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+{
+ u32 plat_lpc, arm_srpgcr, ccm_clpcr;
+ u32 empgc0, empgc1;
+ int stop_mode = 0;
+
+ /* always allow platform to issue a deep sleep mode request */
+ plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+ ~(MXC_CORTEXA8_PLAT_LPC_DSM);
+ ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
+ arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ case STOP_POWER_OFF:
+ plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
+ | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
+ if (mode == WAIT_UNCLOCKED_POWER_OFF) {
+ ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+ ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
+ ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
+ stop_mode = 0;
+ } else {
+ ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+ ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
+ ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
+ ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
+ stop_mode = 1;
+ }
+ arm_srpgcr |= MXC_SRPGCR_PCR;
+
+ if (tzic_enable_wake(1) != 0)
+ return;
+ break;
+ case STOP_POWER_ON:
+ ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+ break;
+ default:
+ printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
+ return;
+ }
+
+ __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
+ __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
+ __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
+
+ /* Enable NEON SRPG for all but MX50TO1.0. */
+ if (mx50_revision() != IMX_CHIP_REVISION_1_0)
+ __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+
+ if (stop_mode) {
+ empgc0 |= MXC_SRPGCR_PCR;
+ empgc1 |= MXC_SRPGCR_PCR;
+
+ __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+}
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4f6f174..4522fbb 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -22,6 +22,7 @@
select SOC_IMX23
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
default y
help
@@ -35,6 +36,7 @@
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_FLEXCAN
+ select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
select MXS_OCOTP
default y
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index d133c7f..c3577ea 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -521,6 +521,15 @@
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac to get a 288 MHz ref_io.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+ reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
return 0;
}
@@ -528,6 +537,12 @@
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp_clk, &ref_io_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5e489a2..1ad97fe 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -618,6 +618,8 @@
_REGISTER_CLOCK("pll2", NULL, pll2_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+ _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -737,6 +739,15 @@
reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac0 to get a 288 MHz ref_io0.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+ reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
return 0;
}
@@ -744,6 +755,13 @@
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io0 than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp0_clk, &ref_io0_clk);
+ clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index c7e14f4..c6f345f 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@
#define mx23_add_auart0() mx23_add_auart(0)
#define mx23_add_auart1() mx23_add_auart(1)
+extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
+#define mx23_add_mxs_mmc(id, pdata) \
+ mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
+
#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
struct platform_device *__init mx23_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9d08555..c473edd 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -37,6 +37,10 @@
extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
+extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
+#define mx28_add_mxs_mmc(id, pdata) \
+ mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
+
#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
struct platform_device *__init mx28_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 1451ad0..acf9eea 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -15,6 +15,9 @@
config MXS_HAVE_PLATFORM_MXS_I2C
bool
+config MXS_HAVE_PLATFORM_MXS_MMC
+ bool
+
config MXS_HAVE_PLATFORM_MXS_PWM
bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 0d9bea3..324f282 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
new file mode 100644
index 0000000..382dacb
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
+ .dma = soc ## _DMA_SSP ## hwid, \
+ .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
+ .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
+ }
+
+#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \
+ [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
+ mxs_mxs_mmc_data_entry(MX23, 0, 1),
+ mxs_mxs_mmc_data_entry(MX23, 1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
+ mxs_mxs_mmc_data_entry(MX28, 0, 0),
+ mxs_mxs_mmc_data_entry(MX28, 1, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_mmc(
+ const struct mxs_mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = data->irq_err,
+ .end = data->irq_err,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq_dma,
+ .end = data->irq_dma,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("mxs-mmc", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 71f2448..c5137f1 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -73,6 +73,19 @@
};
struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mxs_mmc_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t dma;
+ resource_size_t irq_err;
+ resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mxs_mmc(
+ const struct mxs_mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata);
+
/* pwm */
struct platform_device *__init mxs_add_mxs_pwm(
resource_size_t iobase, int id);
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index a66994f..214e5b6 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -28,6 +28,8 @@
#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18)
#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28)
+#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
+#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
static const iomux_cfg_t mx23evk_pads[] __initconst = {
/* duart */
@@ -73,6 +75,36 @@
MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
/* backlight control */
MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
+
+ /* mmc */
+ MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D08__SSP1_DATA4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D09__SSP1_DATA5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D10__SSP1_DATA6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D11__SSP1_DATA7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_CMD__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX23_PAD_SSP1_SCK__SSP1_SCK |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX23_PAD_PWM4__GPIO_1_30 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX23_PAD_PWM3__GPIO_1_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
/* mxsfb (lcdif) */
@@ -101,6 +133,11 @@
.ld_intf_width = STMLCDIF_24BIT,
};
+static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
+ .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+};
+
static void __init mx23evk_init(void)
{
int ret;
@@ -110,6 +147,13 @@
mx23_add_duart();
mx23_add_auart0();
+ /* power on mmc slot by writing 0 to the gpio */
+ ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+ "mmc0-slot-power");
+ if (ret)
+ pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+ mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
+
ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
if (ret)
pr_warn("failed to request gpio lcd-enable: %d\n", ret);
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 08002d0..bb329b9 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -34,6 +34,11 @@
#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
+#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
+#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28)
+#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29)
+
static const iomux_cfg_t mx28evk_pads[] __initconst = {
/* duart */
MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
@@ -115,6 +120,65 @@
MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
/* backlight control */
MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_SSP1_SCK__GPIO_2_12 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM3__GPIO_3_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* mmc1 */
+ MX28_PAD_GPMI_D00__SSP1_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D01__SSP1_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D02__SSP1_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D03__SSP1_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D04__SSP1_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D05__SSP1_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D06__SSP1_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D07__SSP1_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY1__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_WRN__SSP1_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM4__GPIO_3_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
/* fec */
@@ -258,6 +322,18 @@
.ld_intf_width = STMLCDIF_24BIT,
};
+static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
+ {
+ /* mmc0 */
+ .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ }, {
+ /* mmc1 */
+ .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ },
+};
+
static void __init mx28evk_init(void)
{
int ret;
@@ -297,6 +373,19 @@
gpio_set_value(MX28EVK_BL_ENABLE, 1);
mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+
+ /* power on mmc slot by writing 0 to the gpio */
+ ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+ "mmc0-slot-power");
+ if (ret)
+ pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+ mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+
+ ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+ "mmc1-slot-power");
+ if (ret)
+ pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
}
static void __init mx28evk_timer_init(void)
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index fa0b154..0fcff47 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -45,7 +45,7 @@
};
#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
@@ -57,7 +57,20 @@
MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
};
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+ MX28_PAD_ENET0_COL__ENET1_TX_EN,
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
.phy = PHY_INTERFACE_MODE_RMII,
};
@@ -108,15 +121,15 @@
pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
gpio_set_value(TX28_FEC_PHY_RESET, 1);
- ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
- ARRAY_SIZE(tx28_fec_pads));
+ ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+ ARRAY_SIZE(tx28_fec0_pads));
if (ret) {
pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
__func__, ret);
goto free_gpios;
}
- pr_debug("%s: Registering FEC device\n", __func__);
- mx28_add_fec(0, &tx28_fec_data);
+ pr_debug("%s: Registering FEC0 device\n", __func__);
+ mx28_add_fec(0, &tx28_fec0_data);
return 0;
free_gpios:
@@ -129,3 +142,19 @@
return ret;
}
+
+int __init tx28_add_fec1(void)
+{
+ int ret;
+
+ ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+ ARRAY_SIZE(tx28_fec1_pads));
+ if (ret) {
+ pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+ __func__, ret);
+ return ret;
+ }
+ pr_debug("%s: Registering FEC1 device\n", __func__);
+ mx28_add_fec(1, &tx28_fec1_data);
+ return 0;
+}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
index df9e1b6..8ed4254 100644
--- a/arch/arm/mach-mxs/module-tx28.h
+++ b/arch/arm/mach-mxs/module-tx28.h
@@ -7,3 +7,4 @@
* Free Software Foundation.
*/
int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707..edb1dd2 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@
/* enable devices if magic matches */
switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
case TS7800_FPGA_MAGIC:
- printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+ pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@
if (ts78xx_fpga.supports.ts_rtc.present == 1) {
tmp = ts78xx_ts_rtc_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: RTC not registered\n");
+ pr_info("TS-78xx: RTC not registered\n");
ts78xx_fpga.supports.ts_rtc.present = 0;
}
ret |= tmp;
@@ -431,7 +431,7 @@
if (ts78xx_fpga.supports.ts_nand.present == 1) {
tmp = ts78xx_ts_nand_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: NAND not registered\n");
+ pr_info("TS-78xx: NAND not registered\n");
ts78xx_fpga.supports.ts_nand.present = 0;
}
ret |= tmp;
@@ -439,7 +439,7 @@
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: RNG not registered\n");
+ pr_info("TS-78xx: RNG not registered\n");
ts78xx_fpga.supports.ts_rng.present = 0;
}
ret |= tmp;
@@ -466,7 +466,7 @@
{
ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
- printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+ pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff,
ts78xx_fpga.id & 0xff);
@@ -494,7 +494,7 @@
* UrJTAG SVN since r1381 can be used to reprogram the FPGA
*/
if (ts78xx_fpga.id != fpga_id) {
- printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
+ pr_err("TS-78xx FPGA: magic/rev mismatch\n"
"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@
int value, ret;
if (ts78xx_fpga.state < 0) {
- printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+ pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
return -EBUSY;
}
@@ -534,7 +534,7 @@
else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
value = 0;
else {
- printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+ pr_err("ts78xx_fpga_store: Invalid value\n");
return -EINVAL;
}
@@ -616,7 +616,7 @@
ret = ts78xx_fpga_load();
ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
if (ret)
- printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+ pr_err("sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 3499fad..4cb069f 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -128,8 +128,8 @@
return 0;
err_req_gpio:
- while (i > 0)
- gpio_free(gpios[i--]);
+ while (--i >= 0)
+ gpio_free(gpios[i]);
return err;
}
@@ -194,7 +194,7 @@
};
/* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
static void __init am200_presetup_fb(void)
{
int fw;
@@ -249,7 +249,7 @@
/* we divide since we told the LCD controller we're 16bpp */
am200_fb_info.modes->xres /= 2;
- set_pxa_fb_info(&am200_fb_info);
+ pxa_set_fb_info(NULL, &am200_fb_info);
}
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 993d75e..fa8bad2 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -125,10 +125,7 @@
if (err) {
dev_err(&am300_device->dev, "failed requesting "
"gpio %d, err=%d\n", i, err);
- while (i >= DB0_GPIO_PIN)
- gpio_free(i--);
- i = ARRAY_SIZE(gpios) - 1;
- goto err_req_gpio;
+ goto err_req_gpio2;
}
}
@@ -159,9 +156,13 @@
return 0;
+err_req_gpio2:
+ while (--i >= DB0_GPIO_PIN)
+ gpio_free(i);
+ i = ARRAY_SIZE(gpios);
err_req_gpio:
- while (i > 0)
- gpio_free(gpios[i--]);
+ while (--i >= 0)
+ gpio_free(gpios[i]);
return err;
}
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 38dea05..bfbecec 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -263,7 +263,7 @@
}
balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
- set_pxa_fb_info(&balloon3_lcd_screen);
+ pxa_set_fb_info(NULL, &balloon3_lcd_screen);
return;
err2:
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b734d84..8225e2e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -379,7 +379,7 @@
static void __init cmx2xx_init_display(void)
{
- set_pxa_fb_info(cmx2xx_display);
+ pxa_set_fb_info(NULL, cmx2xx_display);
}
#else
static inline void cmx2xx_init_display(void) {}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 06d0a03..b2248e7 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -296,7 +296,7 @@
static void __init cm_x300_init_lcd(void)
{
- set_pxa_fb_info(&cm_x300_lcd);
+ pxa_set_fb_info(NULL, &cm_x300_lcd);
}
#else
static inline void cm_x300_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index ee79739..44c1b77 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -175,7 +175,7 @@
static void __init income_lcd_init(void)
{
- set_pxa_fb_info(&income_lcd_screen);
+ pxa_set_fb_info(NULL, &income_lcd_screen);
}
#else
static inline void income_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 96b2d9f..3f9be41 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -105,7 +105,7 @@
lcd_bl_pin = bl_pin;
gpio_request(bl_pin, "lcd backlight");
gpio_direction_output(bl_pin, 0);
- set_pxa_fb_info(&sharp_lq43_info);
+ pxa_set_fb_info(NULL, &sharp_lq43_info);
}
#endif
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index d4e705c..3a5507e 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -462,7 +462,6 @@
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info udc_info __initdata = {
- .gpio_vbus = -1,
/* no connect GPIO; corgi can't tell connection status */
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c4bf08b..2e04254 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -90,7 +90,6 @@
static struct pxa2xx_udc_mach_info pxa_udc_info = {
.gpio_pullup = -1,
- .gpio_vbus = -1,
};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -188,16 +187,12 @@
.resource = pxafb_resources,
};
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
{
+ pxa_device_fb.dev.parent = parent;
pxa_register_device(&pxa_device_fb, info);
}
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
- pxa_device_fb.dev.parent = parent_dev;
-}
-
static struct resource pxa_resource_ffuart[] = {
{
.start = 0x40100000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index b411d7c..f8a6e9d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@
static void __init em_x270_init_lcd(void)
{
- set_pxa_fb_info(&em_x270_lcd);
+ pxa_set_fb_info(NULL, &em_x270_lcd);
}
#else
static inline void em_x270_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index edca0a0..2e3970f 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,6 +20,7 @@
#include <linux/mfd/t7l66xb.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
#include <video/w100fb.h>
@@ -51,12 +52,20 @@
mi->bank[0].size = (64*1024*1024);
}
-struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+struct gpio_vbus_mach_info e7xx_udc_info = {
.gpio_vbus = GPIO_E7XX_USB_DISC,
.gpio_pullup = GPIO_E7XX_USB_PULLUP,
.gpio_pullup_inverted = 1
};
+static struct platform_device e7xx_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &e7xx_udc_info,
+ },
+};
+
struct pxaficp_platform_data e7xx_ficp_platform_data = {
.gpio_pwdown = GPIO_E7XX_IR_OFF,
.transceiver_cap = IR_SIRMODE | IR_OFF,
@@ -165,6 +174,7 @@
static struct platform_device *e330_devices[] __initdata = {
&e330_tc6387xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e330_init(void)
@@ -175,7 +185,6 @@
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e330_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E330, "Toshiba e330")
@@ -214,6 +223,7 @@
static struct platform_device *e350_devices[] __initdata = {
&e350_t7l66xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e350_init(void)
@@ -224,7 +234,6 @@
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e350_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E350, "Toshiba e350")
@@ -333,6 +342,7 @@
static struct platform_device *e400_devices[] __initdata = {
&e400_t7l66xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e400_init(void)
@@ -344,9 +354,8 @@
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
- set_pxa_fb_info(&e400_pxafb_mach_info);
+ pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
platform_add_devices(ARRAY_AND_SIZE(e400_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E400, "Toshiba e400")
@@ -519,6 +528,7 @@
static struct platform_device *e740_devices[] __initdata = {
&e740_fb_device,
&e740_t7l66xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e740_init(void)
@@ -532,7 +542,6 @@
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
@@ -711,6 +720,7 @@
static struct platform_device *e750_devices[] __initdata = {
&e750_fb_device,
&e750_tc6393xb_device,
+ &e7xx_gpio_vbus,
};
static void __init e750_init(void)
@@ -723,7 +733,6 @@
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
- pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
@@ -873,12 +882,21 @@
/* --------------------------- UDC definitions --------------------------- */
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+static struct gpio_vbus_mach_info e800_udc_info = {
.gpio_vbus = GPIO_E800_USB_DISC,
.gpio_pullup = GPIO_E800_USB_PULLUP,
.gpio_pullup_inverted = 1
};
+static struct platform_device e800_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_udc_info,
+ },
+};
+
+
/* ----------------- e800 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e800_tc6393xb_info = {
@@ -907,6 +925,7 @@
static struct platform_device *e800_devices[] __initdata = {
&e800_fb_device,
&e800_tc6393xb_device,
+ &e800_gpio_vbus,
};
static void __init e800_init(void)
@@ -919,7 +938,6 @@
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e800_devices));
- pxa_set_udc_info(&e800_udc_mach_info);
pxa_set_ac97_info(NULL);
}
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 93f05e0..d88aed8 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -783,7 +783,7 @@
pxa_set_i2c_info(NULL);
- set_pxa_fb_info(&ezx_fb_info_1);
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
pxa_set_keypad_info(&a780_keypad_platform_data);
@@ -853,7 +853,7 @@
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_1);
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
pxa_set_keypad_info(&e680_keypad_platform_data);
@@ -918,7 +918,7 @@
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&a1200_keypad_platform_data);
@@ -1103,7 +1103,7 @@
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&a910_keypad_platform_data);
@@ -1173,7 +1173,7 @@
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&e6_keypad_platform_data);
@@ -1212,7 +1212,7 @@
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&e2_keypad_platform_data);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6fd319e..d65e4bd 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -106,14 +107,22 @@
#endif
#ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
};
+static struct platform_device gumstix_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &gumstix_udc_info,
+ },
+};
+
static void __init gumstix_udc_init(void)
{
- pxa_set_udc_info(&gumstix_udc_info);
+ platform_device_register(&gumstix_gpio_vbus);
}
#else
static void gumstix_udc_init(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index dd40e4a..f7fb64f 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -167,7 +167,7 @@
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
- set_pxa_fb_info(&sharp_lm8v31);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&idp_mci_platform_data);
}
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2bbcf70..0d4700a 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -44,6 +44,11 @@
#define GPIO_NR_PALMZ72_BT_POWER 17
#define GPIO_NR_PALMZ72_BT_RESET 83
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN 56
+#define GPIO_NR_PALMZ72_CAM_RESET 57
+#define GPIO_NR_PALMZ72_CAM_POWER 91
+
/** Initial values **/
/* Battery */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 160ec83..01a45ac 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -154,8 +154,8 @@
void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
void (*smart_update)(struct fb_info *);
};
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 8835c16..7b0f71e 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -25,8 +25,7 @@
#define GPIO98_ZIPITZ2_LID_BUTTON 98
/* Libertas GSPI8686 WiFi */
-#define GPIO14_ZIPITZ2_WIFI_RESET 14
-#define GPIO15_ZIPITZ2_WIFI_POWER 15
+#define GPIO14_ZIPITZ2_WIFI_POWER 14
#define GPIO24_ZIPITZ2_WIFI_CS 24
#define GPIO36_ZIPITZ2_WIFI_IRQ 36
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 87c1ed9..e5e326d 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -185,7 +185,7 @@
static void littleton_init_lcd(void)
{
- set_pxa_fb_info(&littleton_lcd_info);
+ pxa_set_fb_info(NULL, &littleton_lcd_info);
}
#else
static inline void littleton_init_lcd(void) {};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6307f70..f5de541 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -480,7 +480,7 @@
pxa_set_ac97_info(NULL);
if (lpd270_lcd_to_use != NULL)
- set_pxa_fb_info(lpd270_lcd_to_use);
+ pxa_set_fb_info(NULL, lpd270_lcd_to_use);
pxa_set_ohci_info(&lpd270_ohci_platform_data);
}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0fea945..3ede978 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -521,7 +521,7 @@
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
- set_pxa_fb_info(&sharp_lm8v31);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
pxa_set_ficp_info(&lubbock_ficp_platform_data);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5535991..a72993d 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -757,7 +757,7 @@
gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+ pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 29b6e7a..95163ba 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -592,7 +592,7 @@
else
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
- set_pxa_fb_info(&mainstone_pxafb_info);
+ pxa_set_fb_info(NULL, &mainstone_pxafb_info);
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 78d98a8..dd13bb6 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -795,7 +795,7 @@
pxa_set_stuart_info(NULL);
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
- set_pxa_fb_info(&mioa701_pxafb_info);
+ pxa_set_fb_info(NULL, &mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 72adb3a..325c245 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,8 +1,7 @@
/*
* Common code for Palm LD, T5, TX, Z72
*
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -158,7 +157,7 @@
palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
}
- set_pxa_fb_info(&palm27x_lcd_screen);
+ pxa_set_fb_info(NULL, &palm27x_lcd_screen);
}
#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index a09a237..fb06bd0 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -507,7 +507,7 @@
static void __init palmtc_lcd_init(void)
{
- set_pxa_fb_info(&palmtc_lcd_screen);
+ pxa_set_fb_info(NULL, &palmtc_lcd_screen);
}
#else
static inline void palmtc_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3f25014..726f5b9 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -136,30 +136,14 @@
/******************************************************************************
* Backlight
******************************************************************************/
+static struct gpio palmte_bl_gpios[] = {
+ { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+ { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
static int palmte2_backlight_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
- if (ret)
- goto err2;
- ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
- if (ret)
- goto err3;
-
- return 0;
-err3:
- gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
-err2:
- gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-err:
- return ret;
+ return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
}
static int palmte2_backlight_notify(struct device *dev, int brightness)
@@ -171,8 +155,7 @@
static void palmte2_backlight_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTE2_BL_POWER);
- gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+ gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
}
static struct platform_pwm_backlight_data palmte2_backlight_data = {
@@ -363,7 +346,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- set_pxa_fb_info(&palmte2_lcd_screen);
+ pxa_set_fb_info(NULL, &palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3010193..3b8a4f3 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,6 +30,7 @@
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,6 +48,9 @@
#include <mach/palm27x.h>
#include <mach/pm.h>
+#include <mach/camera.h>
+
+#include <media/soc_camera.h>
#include "generic.h"
#include "devices.h"
@@ -103,6 +107,28 @@
GPIO22_GPIO, /* LCD border color */
GPIO96_GPIO, /* lcd power */
+ /* PXA Camera */
+ GPIO81_CIF_DD_0,
+ GPIO48_CIF_DD_5,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO93_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+
+ GPIO56_GPIO, /* OV9640 Powerdown */
+ GPIO57_GPIO, /* OV9640 Reset */
+ GPIO91_GPIO, /* OV9640 Power */
+
+ /* I2C */
+ GPIO117_GPIO, /* I2C_SCL */
+ GPIO118_GPIO, /* I2C_SDA */
+
/* Misc. */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */
GPIO88_GPIO, /* green led */
@@ -254,6 +280,106 @@
#endif
/******************************************************************************
+ * SoC Camera
+ ******************************************************************************/
+#if defined(CONFIG_SOC_CAMERA_OV9640) || \
+ defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
+static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info palmz72_i2c_device[] = {
+ {
+ I2C_BOARD_INFO("ov9640", 0x30),
+ }
+};
+
+static int palmz72_camera_power(struct device *dev, int power)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
+ mdelay(50);
+ return 0;
+}
+
+static int palmz72_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
+ mdelay(50);
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
+ mdelay(50);
+ return 0;
+}
+
+static struct soc_camera_link palmz72_iclink = {
+ .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
+ .board_info = &palmz72_i2c_device[0],
+ .i2c_adapter_id = 0,
+ .module_name = "ov96xx",
+ .power = &palmz72_camera_power,
+ .reset = &palmz72_camera_reset,
+ .flags = SOCAM_DATAWIDTH_8,
+};
+
+static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
+ .sda_pin = 118,
+ .scl_pin = 117,
+ .udelay = 10,
+ .timeout = 100,
+};
+
+static struct platform_device palmz72_i2c_bus_device = {
+ .name = "i2c-gpio",
+ .id = 0, /* we use this as a replacement for i2c-pxa */
+ .dev = {
+ .platform_data = &palmz72_i2c_bus_data,
+ }
+};
+
+static struct platform_device palmz72_camera = {
+ .name = "soc-camera-pdrv",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz72_iclink,
+ },
+};
+
+/* Here we request the camera GPIOs and configure them. We power up the camera
+ * module, deassert the reset pin, but put it into powerdown (low to no power
+ * consumption) mode. This allows us to later bring the module up fast. */
+static struct gpio palmz72_camera_gpios[] = {
+ { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" },
+ { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" },
+ { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" },
+};
+
+static inline void __init palmz72_cam_gpio_init(void)
+{
+ int ret;
+
+ ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+ if (!ret)
+ gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+ else
+ printk(KERN_ERR "Camera GPIO init failed!\n");
+
+ return;
+}
+
+static void __init palmz72_camera_init(void)
+{
+ palmz72_cam_gpio_init();
+ pxa_set_camera_info(&palmz72_pxacamera_platform_data);
+ platform_device_register(&palmz72_i2c_bus_device);
+ platform_device_register(&palmz72_camera);
+}
+#else
+static inline void palmz72_camera_init(void) {}
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static void __init palmz72_init(void)
@@ -276,6 +402,7 @@
palm27x_pmic_init();
palmz72_kpc_init();
palmz72_leds_init();
+ palmz72_camera_init();
}
MACHINE_START(PALMZ72, "Palm Zire72")
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 4d01205..6d5b7e0 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -515,7 +515,7 @@
pcm990_init_irq();
#ifndef CONFIG_PCM990_DISPLAY_NONE
- set_pxa_fb_info(&pcm990_fbinfo);
+ pxa_set_fb_info(NULL, &pcm990_fbinfo);
#endif
platform_device_register(&pcm990_backlight_device);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 35353af..16d14fd 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -445,8 +445,7 @@
if (ret)
pr_warning("poodle: Unable to register LoCoMo device\n");
- set_pxa_fb_parent(&poodle_locomo_device.dev);
- set_pxa_fb_info(&poodle_fb_info);
+ pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 4709418..cd18613 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -597,7 +597,7 @@
{
int ret;
- set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+ pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
/* Earlier devices had the backlight regulator controlled
* via PWM, later versions use another controller for that */
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index eb83c89..fee97a9 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -473,7 +473,7 @@
static void __init saar_init_lcd(void)
{
- set_pxa_fb_info(&saar_lcd_info);
+ pxa_set_fb_info(NULL, &saar_lcd_info);
}
#else
static inline void saar_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 38e2c09..01c5769 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -724,7 +724,7 @@
static void __init spitz_lcd_init(void)
{
- set_pxa_fb_info(&spitz_pxafb_info);
+ pxa_set_fb_info(NULL, &spitz_pxafb_info);
}
#else
static inline void spitz_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9cecf83..53d4a47 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -466,7 +466,7 @@
{
platform_device_register(&tavorevb_backlight_devices[0]);
platform_device_register(&tavorevb_backlight_devices[1]);
- set_pxa_fb_info(&tavorevb_lcd_info);
+ pxa_set_fb_info(NULL, &tavorevb_lcd_info);
}
#else
static inline void tavorevb_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index e7f64d9..428da3f 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -100,7 +100,6 @@
static struct clock_event_device ckevt_pxa_osmr0 = {
.name = "osmr0",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 200,
.set_next_event = pxa_osmr0_set_next_event,
.set_mode = pxa_osmr0_set_mode,
@@ -135,8 +134,8 @@
init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
- ckevt_pxa_osmr0.mult =
- div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+ clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
+ clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
ckevt_pxa_osmr0.min_delta_ns =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5ad3807..5fa1457 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -35,6 +35,7 @@
#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -240,12 +241,20 @@
/*
* USB Device Controller
*/
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
+static struct gpio_vbus_mach_info tosa_udc_info = {
.gpio_pullup = TOSA_GPIO_USB_PULLUP,
.gpio_vbus = TOSA_GPIO_USB_IN,
.gpio_vbus_inverted = 1,
};
+static struct platform_device tosa_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_udc_info,
+ },
+};
+
/*
* MMC/SD Device
*/
@@ -891,6 +900,7 @@
&tosa_bt_device,
&sharpsl_rom_device,
&wm9712_device,
+ &tosa_gpio_vbus,
};
static void tosa_poweroff(void)
@@ -937,7 +947,6 @@
dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
pxa_set_mci_info(&tosa_mci_platform_data);
- pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 857bb2e..b9cfbeb 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -516,9 +516,9 @@
pxa_set_stuart_info(NULL);
if (0) /* dont know how to determine LCD */
- set_pxa_fb_info(&sharp_lcd);
+ pxa_set_fb_info(NULL, &sharp_lcd);
else
- set_pxa_fb_info(&toshiba_lcd);
+ pxa_set_fb_info(NULL, &toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
#ifndef STATUS_LEDS_ON_STUART_PINS
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index aa70331..b523f11 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -932,7 +932,7 @@
/* Wake-up serial console */
viper_init_serial_gpio();
- set_pxa_fb_info(&fb_info);
+ pxa_set_fb_info(NULL, &fb_info);
/* v1 hardware cannot use the datacs line */
version = viper_hw_version();
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index e709fd4..f71d377 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -572,7 +572,7 @@
}
vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
- set_pxa_fb_info(&vpac270_lcd_screen);
+ pxa_set_fb_info(NULL, &vpac270_lcd_screen);
return;
err2:
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index aaf8837..fbe9e02 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -91,13 +91,13 @@
GPIO47_STUART_TXD,
/* Keypad */
- GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
- GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
- GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
- GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
- GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
- GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
- GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO34_KP_MKIN_3,
+ GPIO38_KP_MKIN_4,
+ GPIO16_KP_MKIN_5,
+ GPIO17_KP_MKIN_6,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@@ -138,8 +138,7 @@
GPIO1_GPIO, /* Power button */
GPIO37_GPIO, /* Headphone detect */
GPIO98_GPIO, /* Lid switch */
- GPIO14_GPIO, /* WiFi Reset */
- GPIO15_GPIO, /* WiFi Power */
+ GPIO14_GPIO, /* WiFi Power */
GPIO24_GPIO, /* WiFi CS */
GPIO36_GPIO, /* WiFi IRQ */
GPIO88_GPIO, /* LCD CS */
@@ -204,7 +203,7 @@
/* Keypad Backlight */
.pwm_id = 1,
.max_brightness = 1023,
- .dft_brightness = 512,
+ .dft_brightness = 0,
.pwm_period_ns = 1260320,
},
[1] = {
@@ -271,7 +270,7 @@
static void __init z2_lcd_init(void)
{
- set_pxa_fb_info(&z2_lcd_screen);
+ pxa_set_fb_info(NULL, &z2_lcd_screen);
}
#else
static inline void z2_lcd_init(void) {}
@@ -309,12 +308,12 @@
.active_low = 1,
}, {
.name = "z2:green:charged",
- .default_trigger = "none",
+ .default_trigger = "mmc0",
.gpio = GPIO85_ZIPITZ2_LED_CHARGED,
.active_low = 1,
}, {
.name = "z2:amber:charging",
- .default_trigger = "none",
+ .default_trigger = "Z2-charging-or-full",
.gpio = GPIO83_ZIPITZ2_LED_CHARGING,
.active_low = 1,
},
@@ -427,8 +426,22 @@
******************************************************************************/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button z2_pxa_buttons[] = {
- {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
- {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+ {
+ .code = KEY_POWER,
+ .gpio = GPIO1_ZIPITZ2_POWER_BUTTON,
+ .active_low = 0,
+ .desc = "Power Button",
+ .wakeup = 1,
+ .type = EV_KEY,
+ },
+ {
+ .code = SW_LID,
+ .gpio = GPIO98_ZIPITZ2_LID_BUTTON,
+ .active_low = 1,
+ .desc = "Lid Switch",
+ .wakeup = 0,
+ .type = EV_SW,
+ },
};
static struct gpio_keys_platform_data z2_pxa_keys_data = {
@@ -461,9 +474,9 @@
.batt_I2C_addr = 0x55,
.batt_I2C_reg = 2,
.charge_gpio = GPIO0_ZIPITZ2_AC_DETECT,
- .min_voltage = 2400000,
- .max_voltage = 3700000,
- .batt_div = 69,
+ .min_voltage = 3475000,
+ .max_voltage = 4190000,
+ .batt_div = 59,
.batt_mult = 1000000,
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
.batt_name = "Z2",
@@ -497,26 +510,16 @@
{
int ret = 0;
- ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+ ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
if (ret)
goto err;
- ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+ ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
if (ret)
goto err2;
- ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
- if (ret)
- goto err2;
-
- ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
- if (ret)
- goto err3;
-
- /* Reset the card */
+ /* Wait until card is powered on */
mdelay(180);
- gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
- mdelay(20);
spi->bits_per_word = 16;
spi->mode = SPI_MODE_2,
@@ -525,22 +528,18 @@
return 0;
-err3:
- gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
err2:
- gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+ gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
err:
return ret;
};
static int z2_lbs_spi_teardown(struct spi_device *spi)
{
- gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
- gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
- gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
- gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
- return 0;
+ gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
+ gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
+ return 0;
};
static struct pxa2xx_spi_chip z2_lbs_chip_info = {
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 139aa7f..00363c7 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -847,7 +847,7 @@
if (zeus_setup_fb_gpios())
pr_err("Failed to setup fb gpios\n");
else
- set_pxa_fb_info(&zeus_fb_info);
+ pxa_set_fb_info(NULL, &zeus_fb_info);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index a4c784a..5821185 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -208,7 +208,7 @@
platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {
- set_pxa_fb_info(&zylonite_sharp_lcd_info);
+ pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
return;
}
@@ -220,7 +220,7 @@
else
zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
- set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+ pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
}
#else
static inline void zylonite_init_lcd(void) {}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 2ecc1d9..10e75fa 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -348,7 +348,7 @@
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
- gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+ gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
__io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 96e59e3..eb7ffa0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -314,7 +314,7 @@
.gpio_cd = -1,
};
-static struct resource chalcd_resources[] = {
+static struct resource char_lcd_resources[] = {
{
.start = VERSATILE_CHAR_LCD_BASE,
.end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 6561c9d..ccc789e 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -53,7 +53,7 @@
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_4K,
+ .end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
index 10653cc..805336f 100644
--- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
@@ -27,7 +27,7 @@
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_16K,
+ .end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
index 5cd6466..6fda788 100644
--- a/arch/arm/plat-mxc/include/mach/audmux.h
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -15,6 +15,14 @@
#define MX31_AUDMUX_PORT5_SSI_PINS_5 4
#define MX31_AUDMUX_PORT6_SSI_PINS_6 5
+#define MX51_AUDMUX_PORT1_SSI0 0
+#define MX51_AUDMUX_PORT2_SSI1 1
+#define MX51_AUDMUX_PORT3 2
+#define MX51_AUDMUX_PORT4 3
+#define MX51_AUDMUX_PORT5 4
+#define MX51_AUDMUX_PORT6 5
+#define MX51_AUDMUX_PORT7 6
+
/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff)
#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8)
@@ -28,7 +36,7 @@
#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30)
#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31)
-/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31)
#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27)
#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index c4f116d..7a9b20a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -90,12 +90,12 @@
#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24)
+#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
+#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
index aaec2a6..5f2da75a 100644
--- a/arch/arm/plat-mxc/include/mach/mx50.h
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -282,4 +282,8 @@
#define MX50_INT_APBHDMA_CHAN6 116
#define MX50_INT_APBHDMA_CHAN7 117
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx50_revision(void);
+#endif
+
#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 1eb339e..dede19a 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -347,6 +347,7 @@
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
+extern void mx51_display_revision(void);
#endif
/* tape-out 1 defines */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 7e07263..1aea818 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -51,6 +51,20 @@
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
+#define IMX_CHIP_REVISION_1_0_STRING "1.0"
+#define IMX_CHIP_REVISION_1_1_STRING "1.1"
+#define IMX_CHIP_REVISION_1_2_STRING "1.2"
+#define IMX_CHIP_REVISION_1_3_STRING "1.3"
+#define IMX_CHIP_REVISION_2_0_STRING "2.0"
+#define IMX_CHIP_REVISION_2_1_STRING "2.1"
+#define IMX_CHIP_REVISION_2_2_STRING "2.2"
+#define IMX_CHIP_REVISION_2_3_STRING "2.3"
+#define IMX_CHIP_REVISION_3_0_STRING "3.0"
+#define IMX_CHIP_REVISION_3_1_STRING "3.1"
+#define IMX_CHIP_REVISION_3_2_STRING "3.2"
+#define IMX_CHIP_REVISION_3_3_STRING "3.3"
+#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown"
+
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
@@ -181,6 +195,15 @@
u32 cpu_rate;
};
+int tzic_enable_wake(int is_idle);
+enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+};
+
extern struct cpu_op *(*get_cpu_op)(int *op);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 95be51b..0417da9 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -20,6 +20,8 @@
#include <mach/hardware.h>
#include <mach/common.h>
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+
static inline void arch_idle(void)
{
#ifdef CONFIG_ARCH_MXC91231
@@ -54,7 +56,9 @@
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
- } else
+ } else if (cpu_is_mx51())
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ else
cpu_do_idle();
}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 9f0c261..2237ff8 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <mach/hardware.h>
+#include <asm/sched_clock.h>
#include <asm/mach/time.h>
#include <mach/common.h>
@@ -105,6 +106,11 @@
__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
}
+static cycle_t dummy_get_cycles(struct clocksource *cs)
+{
+ return 0;
+}
+
static cycle_t mx1_2_get_cycles(struct clocksource *cs)
{
return __raw_readl(timer_base + MX1_2_TCN);
@@ -118,18 +124,35 @@
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
- .read = mx1_2_get_cycles,
+ .read = dummy_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static DEFINE_CLOCK_DATA(cd);
+unsigned long long notrace sched_clock(void)
+{
+ cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mxc_update_sched_clock(void)
+{
+ cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
if (timer_is_v2())
clocksource_mxc.read = v2_get_cycles;
+ else
+ clocksource_mxc.read = mx1_2_get_cycles;
+ init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
clocksource_register_hz(&clocksource_mxc, c);
return 0;
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 49642b5..e9d689b 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,7 +10,6 @@
select GENERIC_IRQ_PROBE
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_SHOW
- select GENERIC_HARDIRQS_NO_DEPRECATED
help
AVR32 is a high-performance 32-bit RISC microprocessor core,
designed for cost-sensitive embedded applications, with particular
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 3753410..f308e1d 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -282,7 +282,7 @@
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct pio_device *pio = get_irq_desc_chip_data(desc);
+ struct pio_device *pio = irq_desc_get_chip_data(desc);
unsigned gpio_irq;
gpio_irq = (unsigned) irq_get_handler_data(irq);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 672c216..8addb12 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -34,7 +34,6 @@
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
select IRQ_PER_CPU if SMP
- select GENERIC_HARDIRQS_NO_DEPRECATED
config GENERIC_CSUM
def_bool y
diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
index 362f59d..ad0881b 100644
--- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
+++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -46,7 +46,6 @@
# CONFIG_WIRELESS is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 6883803..580bf42 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -70,7 +70,6 @@
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_NAND=m
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_SMSC_PHY=y
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index b7c8451..77a27e3 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -63,7 +63,6 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 97ebe09..8501431 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -58,6 +58,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index c245754..dbf750c 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -64,7 +64,6 @@
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_GPIO_ADDR=y
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index baf1c15..07ffbda 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -44,7 +44,6 @@
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_RAM=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index df26758..31d9542 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -63,7 +63,6 @@
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
# CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig
index f503136..b192acf 100644
--- a/arch/blackfin/configs/DNP5370_defconfig
+++ b/arch/blackfin/configs/DNP5370_defconfig
@@ -55,7 +55,6 @@
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 7450127..06e9f49 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -45,6 +45,7 @@
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 8538095..12e66cd 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -48,6 +48,7 @@
CONFIG_MTD_UCLINUX=y
CONFIG_MTD_NAND=m
CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT25=m
CONFIG_NETDEVICES=y
# CONFIG_NETDEV_1000 is not set
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 49762c6..8a0fed1 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -25,7 +25,6 @@
#include <asm-generic/bitops/const_hweight.h>
#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/le.h>
#include <asm-generic/bitops/ext2-atomic.h>
#ifndef CONFIG_SMP
@@ -113,6 +112,9 @@
#endif /* CONFIG_SMP */
+/* Needs to be after test_bit and friends */
+#include <asm-generic/bitops/le.h>
+
/*
* hweightN: returns the hamming weight (i.e. the number
* of bits set) of a N-bit word
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index a6dfa6b..35e350c 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -4,7 +4,7 @@
* Licensed under the GPL-2 or later
*/
-#define pr_fmt(fmt) "module %s: " fmt
+#define pr_fmt(fmt) "module %s: " fmt, mod->name
#include <linux/moduleloader.h>
#include <linux/elf.h>
@@ -57,8 +57,7 @@
dest = l1_inst_sram_alloc(s->sh_size);
mod->arch.text_l1 = dest;
if (dest == NULL) {
- pr_err("L1 inst memory allocation failed\n",
- mod->name);
+ pr_err("L1 inst memory allocation failed\n");
return -1;
}
dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -70,8 +69,7 @@
dest = l1_data_sram_alloc(s->sh_size);
mod->arch.data_a_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -83,8 +81,7 @@
dest = l1_data_sram_zalloc(s->sh_size);
mod->arch.bss_a_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
@@ -93,8 +90,7 @@
dest = l1_data_B_sram_alloc(s->sh_size);
mod->arch.data_b_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -104,8 +100,7 @@
dest = l1_data_B_sram_alloc(s->sh_size);
mod->arch.bss_b_l1 = dest;
if (dest == NULL) {
- pr_err("L1 data memory allocation failed\n",
- mod->name);
+ pr_err("L1 data memory allocation failed\n");
return -1;
}
memset(dest, 0, s->sh_size);
@@ -117,8 +112,7 @@
dest = l2_sram_alloc(s->sh_size);
mod->arch.text_l2 = dest;
if (dest == NULL) {
- pr_err("L2 SRAM allocation failed\n",
- mod->name);
+ pr_err("L2 SRAM allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -130,8 +124,7 @@
dest = l2_sram_alloc(s->sh_size);
mod->arch.data_l2 = dest;
if (dest == NULL) {
- pr_err("L2 SRAM allocation failed\n",
- mod->name);
+ pr_err("L2 SRAM allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -143,8 +136,7 @@
dest = l2_sram_zalloc(s->sh_size);
mod->arch.bss_l2 = dest;
if (dest == NULL) {
- pr_err("L2 SRAM allocation failed\n",
- mod->name);
+ pr_err("L2 SRAM allocation failed\n");
return -1;
}
@@ -160,9 +152,9 @@
int
apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
- unsigned int symindex, unsigned int relsec, struct module *me)
+ unsigned int symindex, unsigned int relsec, struct module *mod)
{
- pr_err(".rel unsupported\n", me->name);
+ pr_err(".rel unsupported\n");
return -ENOEXEC;
}
@@ -186,7 +178,7 @@
Elf32_Sym *sym;
unsigned long location, value, size;
- pr_debug("applying relocate section %u to %u\n", mod->name,
+ pr_debug("applying relocate section %u to %u\n",
relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
@@ -203,14 +195,14 @@
#ifdef CONFIG_SMP
if (location >= COREB_L1_DATA_A_START) {
- pr_err("cannot relocate in L1: %u (SMP kernel)",
- mod->name, ELF32_R_TYPE(rel[i].r_info));
+ pr_err("cannot relocate in L1: %u (SMP kernel)\n",
+ ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
#endif
pr_debug("location is %lx, value is %lx type is %d\n",
- mod->name, location, value, ELF32_R_TYPE(rel[i].r_info));
+ location, value, ELF32_R_TYPE(rel[i].r_info));
switch (ELF32_R_TYPE(rel[i].r_info)) {
@@ -230,11 +222,11 @@
case R_BFIN_PCREL12_JUMP_S:
case R_BFIN_PCREL10:
pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
- mod->name, ELF32_R_TYPE(rel[i].r_info));
+ ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
default:
- pr_err("unknown relocation: %u\n", mod->name,
+ pr_err("unknown relocation: %u\n",
ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
@@ -251,8 +243,7 @@
isram_memcpy((void *)location, &value, size);
break;
default:
- pr_err("invalid relocation for %#lx\n",
- mod->name, location);
+ pr_err("invalid relocation for %#lx\n", location);
return -ENOEXEC;
}
}
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 617925d..a6d0306 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -55,7 +55,6 @@
default y
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
config HZ
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 6db8aea..064f621 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,7 +7,6 @@
select HAVE_PERF_EVENTS
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
- select GENERIC_HARDIRQS_NO_DEPRECATED
config ZONE_DMA
bool
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 931a1ac..e20322f 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -3,7 +3,6 @@
default y
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
config SYMBOL_PREFIX
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 7f399f9..139c018 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -412,7 +412,7 @@
pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type];
/* Don't force an interrupt if the irq has been disabled */
- if (!irqd_irq_disabled(sn_irq_info->irq_irq) &&
+ if (!irqd_irq_disabled(irq_get_irq_data(sn_irq_info->irq_irq)) &&
pci_provider && pci_provider->force_interrupt)
(*pci_provider->force_interrupt)(sn_irq_info);
}
diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
index c76d8dc..7aab87f 100644
--- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
+++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
@@ -45,38 +45,6 @@
return single_open(file, licenseID_show, NULL);
}
-/*
- * Enable forced interrupt by default.
- * When set, the sn interrupt handler writes the force interrupt register on
- * the bridge chip. The hardware will then send an interrupt message if the
- * interrupt line is active. This mimics a level sensitive interrupt.
- */
-extern int sn_force_interrupt_flag;
-
-static int sn_force_interrupt_show(struct seq_file *s, void *p)
-{
- seq_printf(s, "Force interrupt is %s\n",
- sn_force_interrupt_flag ? "enabled" : "disabled");
- return 0;
-}
-
-static ssize_t sn_force_interrupt_write_proc(struct file *file,
- const char __user *buffer, size_t count, loff_t *data)
-{
- char val;
-
- if (copy_from_user(&val, buffer, 1))
- return -EFAULT;
-
- sn_force_interrupt_flag = (val == '0') ? 0 : 1;
- return count;
-}
-
-static int sn_force_interrupt_open(struct inode *inode, struct file *file)
-{
- return single_open(file, sn_force_interrupt_show, NULL);
-}
-
static int coherence_id_show(struct seq_file *s, void *p)
{
seq_printf(s, "%d\n", partition_coherence_id());
@@ -114,14 +82,6 @@
.release = single_release,
};
-static const struct file_operations proc_sn_force_intr_fops = {
- .open = sn_force_interrupt_open,
- .read = seq_read,
- .write = sn_force_interrupt_write_proc,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
static const struct file_operations proc_coherence_id_fops = {
.open = coherence_id_open,
.read = seq_read,
@@ -149,8 +109,6 @@
proc_create("system_serial_number", 0444, sgi_proc_dir,
&proc_system_sn_fops);
proc_create("licenseID", 0444, sgi_proc_dir, &proc_license_id_fops);
- proc_create("sn_force_interrupt", 0644, sgi_proc_dir,
- &proc_sn_force_intr_fops);
proc_create("coherence_id", 0444, sgi_proc_dir,
&proc_coherence_id_fops);
proc_create("sn_topology", 0444, sgi_proc_dir, &proc_sn_topo_fops);
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index b28d090..736b808 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -8,7 +8,6 @@
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6e056d3..75531da 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -5,7 +5,6 @@
select HAVE_AOUT if MMU
select GENERIC_ATOMIC64 if MMU
select HAVE_GENERIC_HARDIRQS if !MMU
- select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU
config RWSEM_GENERIC_SPINLOCK
bool
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index c49c326..851b3bf 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -17,7 +17,6 @@
select OF_EARLY_FLATTREE
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
config SWAP
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index d770b00..30edd61 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -386,8 +386,12 @@
#define __NR_fanotify_init 368
#define __NR_fanotify_mark 369
#define __NR_prlimit64 370
+#define __NR_name_to_handle_at 371
+#define __NR_open_by_handle_at 372
+#define __NR_clock_adjtime 373
+#define __NR_syncfs 374
-#define __NR_syscalls 371
+#define __NR_syscalls 375
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f0cb5c2..494b63b 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -10,6 +10,7 @@
CFLAGS_REMOVE_selfmod.o = -pg
CFLAGS_REMOVE_heartbeat.o = -pg
CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_process.o = -pg
endif
extra-y := head.o vmlinux.lds
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index 515feb4..357d56a 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -51,6 +51,9 @@
: "r" (parent), "r" (return_hooker)
);
+ flush_dcache_range((u32)parent, (u32)parent + 4);
+ flush_icache_range((u32)parent, (u32)parent + 4);
+
if (unlikely(faulted)) {
ftrace_graph_stop();
WARN_ON(1);
@@ -95,6 +98,9 @@
if (unlikely(faulted))
return -EFAULT;
+ flush_dcache_range(addr, addr + 4);
+ flush_icache_range(addr, addr + 4);
+
return 0;
}
@@ -195,8 +201,6 @@
ret += ftrace_modify_code((unsigned long)&ftrace_caller,
MICROBLAZE_NOP);
- /* All changes are done - lets do caches consistent */
- flush_icache();
return ret;
}
@@ -210,7 +214,6 @@
old_jump = *(unsigned int *)ip; /* save jump over instruction */
ret = ftrace_modify_code(ip, MICROBLAZE_NOP);
- flush_icache();
pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump);
return ret;
@@ -222,7 +225,6 @@
unsigned long ip = (unsigned long)(&ftrace_call_graph);
ret = ftrace_modify_code(ip, old_jump);
- flush_icache();
pr_debug("%s\n", __func__);
return ret;
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 5ba7e16..c88f066 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -158,11 +158,11 @@
for (i = 0; i < nr_irq; ++i) {
if (intr_type & (0x00000001 << i)) {
irq_set_chip_and_handler_name(i, &intc_dev,
- handle_edge_irq, intc_dev.name);
+ handle_edge_irq, "edge");
irq_clear_status_flags(i, IRQ_LEVEL);
} else {
irq_set_chip_and_handler_name(i, &intc_dev,
- handle_level_irq, intc_dev.name);
+ handle_level_irq, "level");
irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index e88a930..85cea81 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -375,3 +375,7 @@
.long sys_fanotify_init
.long sys_fanotify_mark
.long sys_prlimit64 /* 370 */
+ .long sys_name_to_handle_at
+ .long sys_open_by_handle_at
+ .long sys_clock_adjtime
+ .long sys_syncfs
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index f1fcbff..10c320a 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,6 +2,12 @@
# Makefile
#
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ashldi3.o = -pg
+CFLAGS_REMOVE_ashrdi3.o = -pg
+CFLAGS_REMOVE_lshrdi3.o = -pg
+endif
+
lib-y := memset.o
ifeq ($(CONFIG_OPT_LIB_ASM),y)
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index a523c94..feaf09c 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -2,7 +2,6 @@
def_bool y
select HAVE_OPROFILE
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_KGDB
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9b1f427..69ff049 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -15,7 +15,6 @@
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select IRQ_PER_CPU
- select GENERIC_HARDIRQS_NO_DEPRECATED
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d0e8a1d..b6ff882 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -138,7 +138,6 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select IRQ_PER_CPU
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 6cf9d66..abf74dc 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -47,6 +47,7 @@
CONFIG_MTD_UBI=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 6828eda..0c7de96 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -43,6 +43,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_SCSI_TGT=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 4b24412..d41857a 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -85,6 +85,7 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_DS1682=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a360ba4..38303ec 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -85,6 +85,7 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_DS1682=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index be2829d..9853397 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -138,6 +138,7 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_DS1682=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0c9c7ed..b614508d 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -63,6 +63,7 @@
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig
index 06f9549..9fa1613 100644
--- a/arch/powerpc/configs/e55xx_smp_defconfig
+++ b/arch/powerpc/configs/e55xx_smp_defconfig
@@ -32,6 +32,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index f39d0cf..8a874b9 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -78,6 +78,7 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 62db8a3..c02bbb2 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -61,6 +61,7 @@
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_XIP=y
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7376e27..e63f537 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -52,6 +52,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI_TGT=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 99a19d1..c06a86c 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -82,6 +82,7 @@
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index c636f23..942ced9 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -84,6 +84,7 @@
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 55b5431..038a308 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -66,6 +66,7 @@
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index edd2d54..f4deb0b 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -59,6 +59,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 9d64a68..0a10fb0 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -398,6 +398,7 @@
CONFIG_CDROM_PKTCDVD=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_HD=y
+CONFIG_MISC_DEVICES=y
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SENSORS_TSL2550=m
CONFIG_EEPROM_AT24=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 9c3f22c..249ddd0 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -189,6 +189,7 @@
CONFIG_BNX2=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
CONFIG_EHEA=y
CONFIG_IXGBE=m
CONFIG_IXGB=m
@@ -255,6 +256,8 @@
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_EHCA=m
+CONFIG_INFINIBAND_CXGB3=m
+CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 6d2416a..dd70fac 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -42,6 +42,7 @@
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
size_t size, int direction);
+extern unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr);
#else /* ! CONFIG_NOT_COHERENT_CACHE */
/*
@@ -198,6 +199,11 @@
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+extern int dma_mmap_coherent(struct device *, struct vm_area_struct *,
+ void *, dma_addr_t, size_t);
+#define ARCH_HAS_DMA_MMAP_COHERENT
+
+
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index fe56a23..e4f0191 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -35,9 +35,9 @@
int (*probe)(void);
void (*kick_cpu)(int nr);
void (*setup_cpu)(int nr);
+ void (*bringup_done)(void);
void (*take_timebase)(void);
void (*give_timebase)(void);
- int (*cpu_enable)(unsigned int nr);
int (*cpu_disable)(void);
void (*cpu_die)(unsigned int nr);
int (*cpu_bootable)(unsigned int nr);
@@ -267,7 +267,6 @@
extern void e500_idle(void);
extern void power4_idle(void);
-extern void power4_cpu_offline_powersave(void);
extern void ppc6xx_idle(void);
extern void book3e_idle(void);
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index acac35d..ae7b3ef 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -27,7 +27,7 @@
#define STE_VSID_SHIFT 12
/* Location of cpu0's segment table */
-#define STAB0_PAGE 0x6
+#define STAB0_PAGE 0x8
#define STAB0_OFFSET (STAB0_PAGE << 12)
#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START)
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index da4b200..2cd664e 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -100,7 +100,7 @@
#endif
#ifdef CONFIG_FLATMEM
-#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET ((unsigned long)(MEMORY_START >> PAGE_SHIFT))
#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
#endif
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index 9e2cb20..f706164 100644
--- a/arch/powerpc/include/asm/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -81,7 +81,7 @@
static inline void qe_ic_cascade_low_ipic(unsigned int irq,
struct irq_desc *desc)
{
- struct qe_ic *qe_ic = get_irq_desc_data(desc);
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
if (cascade_irq != NO_IRQ)
@@ -91,7 +91,7 @@
static inline void qe_ic_cascade_high_ipic(unsigned int irq,
struct irq_desc *desc)
{
- struct qe_ic *qe_ic = get_irq_desc_data(desc);
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
if (cascade_irq != NO_IRQ)
@@ -101,9 +101,9 @@
static inline void qe_ic_cascade_low_mpic(unsigned int irq,
struct irq_desc *desc)
{
- struct qe_ic *qe_ic = get_irq_desc_data(desc);
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
- struct irq_chip *chip = get_irq_desc_chip(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
@@ -114,9 +114,9 @@
static inline void qe_ic_cascade_high_mpic(unsigned int irq,
struct irq_desc *desc)
{
- struct qe_ic *qe_ic = get_irq_desc_data(desc);
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
- struct irq_chip *chip = get_irq_desc_chip(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
@@ -127,9 +127,9 @@
static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
struct irq_desc *desc)
{
- struct qe_ic *qe_ic = get_irq_desc_data(desc);
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
unsigned int cascade_irq;
- struct irq_chip *chip = get_irq_desc_chip(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
cascade_irq = qe_ic_get_high_irq(qe_ic);
if (cascade_irq == NO_IRQ)
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 86ad812..3b1a9b7 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -110,7 +110,7 @@
#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
-#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
+#define SPRN_MAS5 0x153 /* MMU Assist Register 5 */
#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
#define SPRN_PID1 0x279 /* Process ID Register 1 */
#define SPRN_PID2 0x27A /* Process ID Register 2 */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 66e237b..a902a0d 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -36,15 +36,16 @@
extern void smp_send_debugger_break(int cpu);
extern void smp_message_recv(int);
+extern void start_secondary_resume(void);
DECLARE_PER_CPU(unsigned int, cpu_pvr);
#ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(const struct cpumask *map);
+extern void migrate_irqs(void);
int generic_cpu_disable(void);
-int generic_cpu_enable(unsigned int cpu);
void generic_cpu_die(unsigned int cpu);
void generic_mach_cpu_die(void);
+void generic_set_cpu_dead(unsigned int cpu);
#endif
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index aa0f1eb..60f64b1 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -348,3 +348,7 @@
COMPAT_SYS_SPU(recvmsg)
COMPAT_SYS_SPU(recvmmsg)
SYSCALL_SPU(accept4)
+SYSCALL_SPU(name_to_handle_at)
+COMPAT_SYS_SPU(open_by_handle_at)
+COMPAT_SYS_SPU(clock_adjtime)
+SYSCALL_SPU(syncfs)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 6151937..3c21564 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -367,10 +367,14 @@
#define __NR_recvmsg 342
#define __NR_recvmmsg 343
#define __NR_accept4 344
+#define __NR_name_to_handle_at 345
+#define __NR_open_by_handle_at 346
+#define __NR_clock_adjtime 347
+#define __NR_syncfs 348
#ifdef __KERNEL__
-#define __NR_syscalls 345
+#define __NR_syscalls 349
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index cf02cad..d238c08 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -179,3 +179,21 @@
return 0;
}
fs_initcall(dma_init);
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t handle, size_t size)
+{
+ unsigned long pfn;
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ pfn = __dma_get_coherent_pfn((unsigned long)cpu_addr);
+#else
+ pfn = page_to_pfn(virt_to_page(cpu_addr));
+#endif
+ return remap_pfn_range(vma, vma->vm_start,
+ pfn + vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+}
+EXPORT_SYMBOL_GPL(dma_mmap_coherent);
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8a81799..c532cb2 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -977,20 +977,6 @@
rfid
b . /* prevent speculative execution */
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on). The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
- . = STAB0_OFFSET /* 0x6000 */
- .globl initial_stab
-initial_stab:
- .space 4096
-
#ifdef CONFIG_PPC_PSERIES
/*
* Data area reserved for FWNMI option.
@@ -1027,3 +1013,17 @@
#ifdef CONFIG_PPC_PSERIES
. = 0x8000
#endif /* CONFIG_PPC_PSERIES */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on). The address is given to the hv
+ * as a page number (see xLparMap above), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+ . = STAB0_OFFSET /* 0x8000 */
+ .globl initial_stab
+initial_stab:
+ .space 4096
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 98c4b29..c5c24be 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -890,6 +890,15 @@
mtspr SPRN_SRR1,r4
SYNC
RFI
+
+_GLOBAL(start_secondary_resume)
+ /* Reset stack */
+ rlwinm r1,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r3,0
+ std r3,0(r1) /* Zero the stack frame pointer */
+ bl start_secondary
+ b .
#endif /* CONFIG_SMP */
#ifdef CONFIG_KVM_BOOK3S_HANDLER
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 782f23d..271140b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -536,6 +536,13 @@
add r13,r13,r4 /* for this processor. */
mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/
+ /* Mark interrupts soft and hard disabled (they might be enabled
+ * in the PACA when doing hotplug)
+ */
+ li r0,0
+ stb r0,PACASOFTIRQEN(r13)
+ stb r0,PACAHARDIRQEN(r13)
+
/* Create a temp kernel stack for use before relocation is on. */
ld r1,PACAEMERGSP(r13)
subi r1,r1,STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index 5328709..ba31954 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -53,24 +53,3 @@
isync
b 1b
-_GLOBAL(power4_cpu_offline_powersave)
- /* Go to NAP now */
- mfmsr r7
- rldicl r0,r7,48,1
- rotldi r0,r0,16
- mtmsrd r0,1 /* hard-disable interrupts */
- li r0,1
- li r6,0
- stb r0,PACAHARDIRQEN(r13) /* we'll hard-enable shortly */
- stb r6,PACASOFTIRQEN(r13) /* soft-disable irqs */
-BEGIN_FTR_SECTION
- DSSALL
- sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE
- oris r7,r7,MSR_POW@h
- sync
- isync
- mtmsrd r7
- isync
- blr
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 63625e0..f621b7d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -246,12 +246,13 @@
}
#ifdef CONFIG_HOTPLUG_CPU
-void fixup_irqs(const struct cpumask *map)
+void migrate_irqs(void)
{
struct irq_desc *desc;
unsigned int irq;
static int warned;
cpumask_var_t mask;
+ const struct cpumask *map = cpu_online_mask;
alloc_cpumask_var(&mask, GFP_KERNEL);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 9813605..cbdbb14 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -57,6 +57,25 @@
#define DBG(fmt...)
#endif
+
+/* Store all idle threads, this can be reused instead of creating
+* a new thread. Also avoids complicated thread destroy functionality
+* for idle threads.
+*/
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
+ * removed after init for !CONFIG_HOTPLUG_CPU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
+#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
+#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p))
+#else
+static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+#define get_idle_for_cpu(x) (idle_thread_array[(x)])
+#define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p))
+#endif
+
struct thread_info *secondary_ti;
DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
@@ -238,23 +257,6 @@
per_cpu(cpu_pvr, id) = mfspr(SPRN_PVR);
}
-static void __init smp_create_idle(unsigned int cpu)
-{
- struct task_struct *p;
-
- /* create a process for the processor */
- p = fork_idle(cpu);
- if (IS_ERR(p))
- panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-#ifdef CONFIG_PPC64
- paca[cpu].__current = p;
- paca[cpu].kstack = (unsigned long) task_thread_info(p)
- + THREAD_SIZE - STACK_FRAME_OVERHEAD;
-#endif
- current_set[cpu] = task_thread_info(p);
- task_thread_info(p)->cpu = cpu;
-}
-
void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int cpu;
@@ -288,10 +290,6 @@
max_cpus = NR_CPUS;
else
max_cpus = 1;
-
- for_each_possible_cpu(cpu)
- if (cpu != boot_cpuid)
- smp_create_idle(cpu);
}
void __devinit smp_prepare_boot_cpu(void)
@@ -305,7 +303,7 @@
#ifdef CONFIG_HOTPLUG_CPU
/* State of each CPU during hotplug phases */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
int generic_cpu_disable(void)
{
@@ -317,30 +315,8 @@
set_cpu_online(cpu, false);
#ifdef CONFIG_PPC64
vdso_data->processorCount--;
- fixup_irqs(cpu_online_mask);
#endif
- return 0;
-}
-
-int generic_cpu_enable(unsigned int cpu)
-{
- /* Do the normal bootup if we haven't
- * already bootstrapped. */
- if (system_state != SYSTEM_RUNNING)
- return -ENOSYS;
-
- /* get the target out of it's holding state */
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
- smp_wmb();
-
- while (!cpu_online(cpu))
- cpu_relax();
-
-#ifdef CONFIG_PPC64
- fixup_irqs(cpu_online_mask);
- /* counter the irq disable in fixup_irqs */
- local_irq_enable();
-#endif
+ migrate_irqs();
return 0;
}
@@ -362,37 +338,89 @@
unsigned int cpu;
local_irq_disable();
+ idle_task_exit();
cpu = smp_processor_id();
printk(KERN_DEBUG "CPU%d offline\n", cpu);
__get_cpu_var(cpu_state) = CPU_DEAD;
smp_wmb();
while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
cpu_relax();
- set_cpu_online(cpu, true);
- local_irq_enable();
+}
+
+void generic_set_cpu_dead(unsigned int cpu)
+{
+ per_cpu(cpu_state, cpu) = CPU_DEAD;
}
#endif
-static int __devinit cpu_enable(unsigned int cpu)
-{
- if (smp_ops && smp_ops->cpu_enable)
- return smp_ops->cpu_enable(cpu);
+struct create_idle {
+ struct work_struct work;
+ struct task_struct *idle;
+ struct completion done;
+ int cpu;
+};
- return -ENOSYS;
+static void __cpuinit do_fork_idle(struct work_struct *work)
+{
+ struct create_idle *c_idle =
+ container_of(work, struct create_idle, work);
+
+ c_idle->idle = fork_idle(c_idle->cpu);
+ complete(&c_idle->done);
+}
+
+static int __cpuinit create_idle(unsigned int cpu)
+{
+ struct thread_info *ti;
+ struct create_idle c_idle = {
+ .cpu = cpu,
+ .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+ };
+ INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle);
+
+ c_idle.idle = get_idle_for_cpu(cpu);
+
+ /* We can't use kernel_thread since we must avoid to
+ * reschedule the child. We use a workqueue because
+ * we want to fork from a kernel thread, not whatever
+ * userspace process happens to be trying to online us.
+ */
+ if (!c_idle.idle) {
+ schedule_work(&c_idle.work);
+ wait_for_completion(&c_idle.done);
+ } else
+ init_idle(c_idle.idle, cpu);
+ if (IS_ERR(c_idle.idle)) {
+ pr_err("Failed fork for CPU %u: %li", cpu, PTR_ERR(c_idle.idle));
+ return PTR_ERR(c_idle.idle);
+ }
+ ti = task_thread_info(c_idle.idle);
+
+#ifdef CONFIG_PPC64
+ paca[cpu].__current = c_idle.idle;
+ paca[cpu].kstack = (unsigned long)ti + THREAD_SIZE - STACK_FRAME_OVERHEAD;
+#endif
+ ti->cpu = cpu;
+ current_set[cpu] = ti;
+
+ return 0;
}
int __cpuinit __cpu_up(unsigned int cpu)
{
- int c;
+ int rc, c;
secondary_ti = current_set[cpu];
- if (!cpu_enable(cpu))
- return 0;
if (smp_ops == NULL ||
(smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
return -EINVAL;
+ /* Make sure we have an idle thread */
+ rc = create_idle(cpu);
+ if (rc)
+ return rc;
+
/* Make sure callin-map entry is 0 (can be leftover a CPU
* hotplug
*/
@@ -502,7 +530,7 @@
}
/* Activate a secondary processor. */
-int __devinit start_secondary(void *unused)
+void __devinit start_secondary(void *unused)
{
unsigned int cpu = smp_processor_id();
struct device_node *l2_cache;
@@ -523,6 +551,10 @@
secondary_cpu_time_init();
+#ifdef CONFIG_PPC64
+ if (system_state == SYSTEM_RUNNING)
+ vdso_data->processorCount++;
+#endif
ipi_call_lock();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
@@ -558,7 +590,8 @@
local_irq_enable();
cpu_idle();
- return 0;
+
+ BUG();
}
int setup_profiling_timer(unsigned int multiplier)
@@ -585,7 +618,11 @@
free_cpumask_var(old_mask);
+ if (smp_ops && smp_ops->bringup_done)
+ smp_ops->bringup_done();
+
dump_numa_cpu_topology();
+
}
int arch_sd_sibling_asym_packing(void)
@@ -660,5 +697,9 @@
{
if (ppc_md.cpu_die)
ppc_md.cpu_die();
+
+ /* If we return, we re-enter start_secondary */
+ start_secondary_resume();
}
+
#endif
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 09d31db..375480c 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -356,7 +356,7 @@
}
get_paca()->user_time_scaled += user_scaled;
- if (in_irq() || idle_task(smp_processor_id()) != tsk) {
+ if (in_interrupt() || idle_task(smp_processor_id()) != tsk) {
account_system_time(tsk, 0, delta, sys_scaled);
if (stolen)
account_steal_time(stolen);
@@ -577,14 +577,21 @@
struct clock_event_device *evt = &decrementer->event;
u64 now;
+ /* Ensure a positive value is written to the decrementer, or else
+ * some CPUs will continue to take decrementer exceptions.
+ */
+ set_dec(DECREMENTER_MAX);
+
+ /* Some implementations of hotplug will get timer interrupts while
+ * offline, just ignore these
+ */
+ if (!cpu_online(smp_processor_id()))
+ return;
+
trace_timer_interrupt_entry(regs);
__get_cpu_var(irq_stat).timer_irqs++;
- /* Ensure a positive value is written to the decrementer, or else
- * some CPUs will continuue to take decrementer exceptions */
- set_dec(DECREMENTER_MAX);
-
#if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
if (atomic_read(&ppc_n_lost_interrupts) != 0)
do_IRQ(regs);
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 757c0be..b42f76c 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -399,3 +399,23 @@
#endif
}
EXPORT_SYMBOL(__dma_sync_page);
+
+/*
+ * Return the PFN for a given cpu virtual address returned by
+ * __dma_alloc_coherent. This is used by dma_mmap_coherent()
+ */
+unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr)
+{
+ /* This should always be populated, so we don't test every
+ * level. If that fails, we'll have a nice crash which
+ * will be as good as a BUG_ON()
+ */
+ pgd_t *pgd = pgd_offset_k(cpu_addr);
+ pud_t *pud = pud_offset(pgd, cpu_addr);
+ pmd_t *pmd = pmd_offset(pud, cpu_addr);
+ pte_t *ptep = pte_offset_kernel(pmd, cpu_addr);
+
+ if (pte_none(*ptep) || !pte_present(*ptep))
+ return 0;
+ return pte_pfn(*ptep);
+}
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8526bd9..2228151 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -431,7 +431,7 @@
* The thing is, we know that in normal circumstances, this is
* always called as a second level tlb miss for SW load or as a first
* level TLB miss for HW load, so we should be able to peek at the
- * relevant informations in the first exception frame in the PACA.
+ * relevant information in the first exception frame in the PACA.
*
* However, we do need to double check that, because we may just hit
* a stray kernel pointer or a userland attack trying to hit those
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 2057682..f7b0772 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -46,7 +46,7 @@
help
Support from booting from Open Firmware or yaboot using an
Open Firmware client interface. This enables the kernel to
- communicate with open firmware to retrieve system informations
+ communicate with open firmware to retrieve system information
such as the device tree.
In case of doubt, say Y
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index a19bec0..44cfd1b 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -244,7 +244,7 @@
break;
case IIC_IRQ_TYPE_IOEXC:
irq_set_chip_and_handler(virq, &iic_ioexc_chip,
- handle_iic_irq);
+ handle_edge_eoi_irq);
break;
default:
irq_set_chip_and_handler(virq, &iic_chip, handle_edge_eoi_irq);
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index f0bc08f..20468f4 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -33,7 +33,6 @@
extern void pmac_check_ht_link(void);
extern void pmac_setup_smp(void);
-extern void pmac32_cpu_die(void);
extern void low_cpu_die(void) __attribute__((noreturn));
extern int pmac_nvram_init(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index d5aceb7..aa45281 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -650,51 +650,6 @@
return PCI_PROBE_NORMAL;
return PCI_PROBE_DEVTREE;
}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/* access per cpu vars from generic smp.c */
-DECLARE_PER_CPU(int, cpu_state);
-
-static void pmac64_cpu_die(void)
-{
- /*
- * turn off as much as possible, we'll be
- * kicked out as this will only be invoked
- * on core99 platforms for now ...
- */
-
- printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
- __get_cpu_var(cpu_state) = CPU_DEAD;
- smp_wmb();
-
- /*
- * during the path that leads here preemption is disabled,
- * reenable it now so that when coming up preempt count is
- * zero correctly
- */
- preempt_enable();
-
- /*
- * hard-disable interrupts for the non-NAP case, the NAP code
- * needs to re-enable interrupts (but soft-disables them)
- */
- hard_irq_disable();
-
- while (1) {
- /* let's not take timer interrupts too often ... */
- set_dec(0x7fffffff);
-
- /* should always be true at this point */
- if (cpu_has_feature(CPU_FTR_CAN_NAP))
- power4_cpu_offline_powersave();
- else {
- HMT_low();
- HMT_very_low();
- }
- }
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
#endif /* CONFIG_PPC64 */
define_machine(powermac) {
@@ -726,15 +681,4 @@
.pcibios_after_init = pmac_pcibios_after_init,
.phys_mem_access_prot = pci_phys_mem_access_prot,
#endif
-#ifdef CONFIG_HOTPLUG_CPU
-#ifdef CONFIG_PPC64
- .cpu_die = pmac64_cpu_die,
-#endif
-#ifdef CONFIG_PPC32
- .cpu_die = pmac32_cpu_die,
-#endif
-#endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
- .cpu_die = generic_mach_cpu_die,
-#endif
};
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index c95215f..a830c5e 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -840,92 +840,149 @@
/* Setup openpic */
mpic_setup_this_cpu();
-
- if (cpu_nr == 0) {
-#ifdef CONFIG_PPC64
- extern void g5_phy_disable_cpu1(void);
-
- /* Close i2c bus if it was used for tb sync */
- if (pmac_tb_clock_chip_host) {
- pmac_i2c_close(pmac_tb_clock_chip_host);
- pmac_tb_clock_chip_host = NULL;
- }
-
- /* If we didn't start the second CPU, we must take
- * it off the bus
- */
- if (of_machine_is_compatible("MacRISC4") &&
- num_online_cpus() < 2)
- g5_phy_disable_cpu1();
-#endif /* CONFIG_PPC64 */
-
- if (ppc_md.progress)
- ppc_md.progress("core99_setup_cpu 0 done", 0x349);
- }
}
-
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
-
-int smp_core99_cpu_disable(void)
+#ifdef CONFIG_HOTPLUG_CPU
+static int smp_core99_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
{
- set_cpu_online(smp_processor_id(), false);
+ int rc;
- /* XXX reset cpu affinity here */
+ switch(action) {
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ /* Open i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host) {
+ rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
+ if (rc) {
+ pr_err("Failed to open i2c bus for time sync\n");
+ return notifier_from_errno(rc);
+ }
+ }
+ break;
+ case CPU_ONLINE:
+ case CPU_UP_CANCELED:
+ /* Close i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host)
+ pmac_i2c_close(pmac_tb_clock_chip_host);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata smp_core99_cpu_nb = {
+ .notifier_call = smp_core99_cpu_notify,
+};
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static void __init smp_core99_bringup_done(void)
+{
+#ifdef CONFIG_PPC64
+ extern void g5_phy_disable_cpu1(void);
+
+ /* Close i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host)
+ pmac_i2c_close(pmac_tb_clock_chip_host);
+
+ /* If we didn't start the second CPU, we must take
+ * it off the bus.
+ */
+ if (of_machine_is_compatible("MacRISC4") &&
+ num_online_cpus() < 2) {
+ set_cpu_present(1, false);
+ g5_phy_disable_cpu1();
+ }
+#endif /* CONFIG_PPC64 */
+
+#ifdef CONFIG_HOTPLUG_CPU
+ register_cpu_notifier(&smp_core99_cpu_nb);
+#endif
+ if (ppc_md.progress)
+ ppc_md.progress("smp_core99_bringup_done", 0x349);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int smp_core99_cpu_disable(void)
+{
+ int rc = generic_cpu_disable();
+ if (rc)
+ return rc;
+
mpic_cpu_set_priority(0xf);
- asm volatile("mtdec %0" : : "r" (0x7fffffff));
- mb();
- udelay(20);
- asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
return 0;
}
-static int cpu_dead[NR_CPUS];
+#ifdef CONFIG_PPC32
-void pmac32_cpu_die(void)
+static void pmac_cpu_die(void)
{
+ int cpu = smp_processor_id();
+
local_irq_disable();
- cpu_dead[smp_processor_id()] = 1;
+ idle_task_exit();
+ pr_debug("CPU%d offline\n", cpu);
+ generic_set_cpu_dead(cpu);
+ smp_wmb();
mb();
low_cpu_die();
}
-void smp_core99_cpu_die(unsigned int cpu)
-{
- int timeout;
+#else /* CONFIG_PPC32 */
- timeout = 1000;
- while (!cpu_dead[cpu]) {
- if (--timeout == 0) {
- printk("CPU %u refused to die!\n", cpu);
- break;
- }
- msleep(1);
+static void pmac_cpu_die(void)
+{
+ int cpu = smp_processor_id();
+
+ local_irq_disable();
+ idle_task_exit();
+
+ /*
+ * turn off as much as possible, we'll be
+ * kicked out as this will only be invoked
+ * on core99 platforms for now ...
+ */
+
+ printk(KERN_INFO "CPU#%d offline\n", cpu);
+ generic_set_cpu_dead(cpu);
+ smp_wmb();
+
+ /*
+ * Re-enable interrupts. The NAP code needs to enable them
+ * anyways, do it now so we deal with the case where one already
+ * happened while soft-disabled.
+ * We shouldn't get any external interrupts, only decrementer, and the
+ * decrementer handler is safe for use on offline CPUs
+ */
+ local_irq_enable();
+
+ while (1) {
+ /* let's not take timer interrupts too often ... */
+ set_dec(0x7fffffff);
+
+ /* Enter NAP mode */
+ power4_idle();
}
- cpu_dead[cpu] = 0;
}
-#endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */
+#endif /* else CONFIG_PPC32 */
+#endif /* CONFIG_HOTPLUG_CPU */
/* Core99 Macs (dual G4s and G5s) */
struct smp_ops_t core99_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_core99_probe,
+ .bringup_done = smp_core99_bringup_done,
.kick_cpu = smp_core99_kick_cpu,
.setup_cpu = smp_core99_setup_cpu,
.give_timebase = smp_core99_give_timebase,
.take_timebase = smp_core99_take_timebase,
#if defined(CONFIG_HOTPLUG_CPU)
-# if defined(CONFIG_PPC32)
.cpu_disable = smp_core99_cpu_disable,
- .cpu_die = smp_core99_cpu_die,
-# endif
-# if defined(CONFIG_PPC64)
- .cpu_disable = generic_cpu_disable,
.cpu_die = generic_cpu_die,
- /* intentionally do *NOT* assign cpu_enable,
- * the generic code will use kick_cpu then! */
-# endif
#endif
};
@@ -957,5 +1014,10 @@
smp_ops = &psurge_smp_ops;
}
#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_HOTPLUG_CPU
+ ppc_md.cpu_die = pmac_cpu_die;
+#endif
}
+
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 419707b..00cc3a0 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -480,8 +480,32 @@
const char *new_msgs, unsigned long new_len)
{
static unsigned int oops_count = 0;
+ static bool panicking = false;
size_t text_len;
+ switch (reason) {
+ case KMSG_DUMP_RESTART:
+ case KMSG_DUMP_HALT:
+ case KMSG_DUMP_POWEROFF:
+ /* These are almost always orderly shutdowns. */
+ return;
+ case KMSG_DUMP_OOPS:
+ case KMSG_DUMP_KEXEC:
+ break;
+ case KMSG_DUMP_PANIC:
+ panicking = true;
+ break;
+ case KMSG_DUMP_EMERG:
+ if (panicking)
+ /* Panic report already captured. */
+ return;
+ break;
+ default:
+ pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",
+ __FUNCTION__, (int) reason);
+ return;
+ }
+
if (clobbering_unread_rtas_event())
return;
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
index 75a6f48..08672d9 100644
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -34,6 +34,4 @@
#endif
extern enum cpu_state_vals get_preferred_offline_state(int cpu);
-extern int start_secondary(void);
-extern void start_secondary_resume(void);
#endif
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 0317cce..d6479f9 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -64,8 +64,8 @@
int qcss_tok = rtas_token("query-cpu-stopped-state");
if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_INFO "Firmware doesn't support "
- "query-cpu-stopped-state\n");
+ printk_once(KERN_INFO
+ "Firmware doesn't support query-cpu-stopped-state\n");
return QCSS_HARDWARE_ERROR;
}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 6c1e638..ec8fe22 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -204,33 +204,33 @@
static void xics_unmask_irq(struct irq_data *d)
{
- unsigned int irq;
+ unsigned int hwirq;
int call_status;
int server;
pr_devel("xics: unmask virq %d\n", d->irq);
- irq = (unsigned int)irq_map[d->irq].hwirq;
- pr_devel(" -> map to hwirq 0x%x\n", irq);
- if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ hwirq = (unsigned int)irq_map[d->irq].hwirq;
+ pr_devel(" -> map to hwirq 0x%x\n", hwirq);
+ if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
return;
server = get_irq_server(d->irq, d->affinity, 0);
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
+ call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hwirq, server,
DEFAULT_PRIORITY);
if (call_status != 0) {
printk(KERN_ERR
"%s: ibm_set_xive irq %u server %x returned %d\n",
- __func__, irq, server, call_status);
+ __func__, hwirq, server, call_status);
return;
}
/* Now unmask the interrupt (often a no-op) */
- call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq);
+ call_status = rtas_call(ibm_int_on, 1, 1, NULL, hwirq);
if (call_status != 0) {
printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
- __func__, irq, call_status);
+ __func__, hwirq, call_status);
return;
}
}
@@ -250,46 +250,46 @@
return 0;
}
-static void xics_mask_real_irq(struct irq_data *d)
+static void xics_mask_real_irq(unsigned int hwirq)
{
int call_status;
- if (d->irq == XICS_IPI)
+ if (hwirq == XICS_IPI)
return;
- call_status = rtas_call(ibm_int_off, 1, 1, NULL, d->irq);
+ call_status = rtas_call(ibm_int_off, 1, 1, NULL, hwirq);
if (call_status != 0) {
printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
- __func__, d->irq, call_status);
+ __func__, hwirq, call_status);
return;
}
/* Have to set XIVE to 0xff to be able to remove a slot */
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, d->irq,
+ call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hwirq,
default_server, 0xff);
if (call_status != 0) {
printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
- __func__, d->irq, call_status);
+ __func__, hwirq, call_status);
return;
}
}
static void xics_mask_irq(struct irq_data *d)
{
- unsigned int irq;
+ unsigned int hwirq;
pr_devel("xics: mask virq %d\n", d->irq);
- irq = (unsigned int)irq_map[d->irq].hwirq;
- if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ hwirq = (unsigned int)irq_map[d->irq].hwirq;
+ if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
return;
- xics_mask_real_irq(d);
+ xics_mask_real_irq(hwirq);
}
static void xics_mask_unknown_vec(unsigned int vec)
{
printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
- xics_mask_real_irq(irq_get_irq_data(vec));
+ xics_mask_real_irq(vec);
}
static inline unsigned int xics_xirr_vector(unsigned int xirr)
@@ -373,37 +373,37 @@
static void xics_eoi_direct(struct irq_data *d)
{
- unsigned int irq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int hwirq = (unsigned int)irq_map[d->irq].hwirq;
iosync();
- direct_xirr_info_set((pop_cppr() << 24) | irq);
+ direct_xirr_info_set((pop_cppr() << 24) | hwirq);
}
static void xics_eoi_lpar(struct irq_data *d)
{
- unsigned int irq = (unsigned int)irq_map[d->irq].hwirq;
+ unsigned int hwirq = (unsigned int)irq_map[d->irq].hwirq;
iosync();
- lpar_xirr_info_set((pop_cppr() << 24) | irq);
+ lpar_xirr_info_set((pop_cppr() << 24) | hwirq);
}
static int
xics_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool force)
{
- unsigned int irq;
+ unsigned int hwirq;
int status;
int xics_status[2];
int irq_server;
- irq = (unsigned int)irq_map[d->irq].hwirq;
- if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ hwirq = (unsigned int)irq_map[d->irq].hwirq;
+ if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
return -1;
- status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
+ status = rtas_call(ibm_get_xive, 1, 3, xics_status, hwirq);
if (status) {
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
- __func__, irq, status);
+ __func__, hwirq, status);
return -1;
}
@@ -418,11 +418,11 @@
}
status = rtas_call(ibm_set_xive, 3, 1, NULL,
- irq, irq_server, xics_status[1]);
+ hwirq, irq_server, xics_status[1]);
if (status) {
printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
- __func__, irq, status);
+ __func__, hwirq, status);
return -1;
}
@@ -874,7 +874,7 @@
void xics_migrate_irqs_away(void)
{
int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
- unsigned int irq, virq;
+ int virq;
/* If we used to be the default server, move to the new "boot_cpuid" */
if (hw_cpu == default_server)
@@ -892,6 +892,7 @@
for_each_irq(virq) {
struct irq_desc *desc;
struct irq_chip *chip;
+ unsigned int hwirq;
int xics_status[2];
int status;
unsigned long flags;
@@ -901,9 +902,9 @@
continue;
if (irq_map[virq].host != xics_host)
continue;
- irq = (unsigned int)irq_map[virq].hwirq;
+ hwirq = (unsigned int)irq_map[virq].hwirq;
/* We need to get IPIs still. */
- if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
continue;
desc = irq_to_desc(virq);
@@ -918,10 +919,10 @@
raw_spin_lock_irqsave(&desc->lock, flags);
- status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
+ status = rtas_call(ibm_get_xive, 1, 3, xics_status, hwirq);
if (status) {
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
- __func__, irq, status);
+ __func__, hwirq, status);
goto unlock;
}
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index f550e23..a88800f 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -80,7 +80,7 @@
if ((hw & 1) == 0) {
siel |= (0x80000000 >> hw);
out_be32(&siu_reg->sc_siel, siel);
- __irq_set_handler_locked(irq, handle_edge_irq);
+ __irq_set_handler_locked(d->irq, handle_edge_irq);
}
}
return 0;
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 4278bbc..e73bc78 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -3,7 +3,6 @@
config SCORE
def_bool y
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
choice
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9af3c8d..bc439de 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -23,7 +23,6 @@
select HAVE_SPARSE_IRQ
select RTC_LIB
select GENERIC_ATOMIC64
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
help
The SuperH is a RISC processor targeted for use in embedded systems
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 14b2346..e560d10 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -51,7 +51,6 @@
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select IRQ_PREFLOW_FASTEOI
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 2f475d7..9d897b6 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -403,8 +403,9 @@
#define __NR_name_to_handle_at 332
#define __NR_open_by_handle_at 333
#define __NR_clock_adjtime 334
+#define __NR_syncfs 335
-#define NR_syscalls 335
+#define NR_syscalls 336
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c
index 2abace0..773091a 100644
--- a/arch/sparc/kernel/auxio_64.c
+++ b/arch/sparc/kernel/auxio_64.c
@@ -93,7 +93,7 @@
}
EXPORT_SYMBOL(auxio_set_lte);
-static struct of_device_id __initdata auxio_match[] = {
+static const struct of_device_id auxio_match[] = {
{
.name = "auxio",
},
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 136d371..7eef3f7 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -140,7 +140,7 @@
goto out;
}
-static struct of_device_id __initdata clock_board_match[] = {
+static const struct of_device_id clock_board_match[] = {
{
.name = "clock-board",
},
@@ -245,7 +245,7 @@
goto out;
}
-static struct of_device_id __initdata fhc_match[] = {
+static const struct of_device_id fhc_match[] = {
{
.name = "fhc",
},
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 4a700f4..3add4de 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1218,7 +1218,7 @@
return 0;
}
-static struct vio_device_id __initdata ds_match[] = {
+static const struct vio_device_id ds_match[] = {
{
.type = "domain-services-port",
},
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 1504df8..906ee3e 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1283,7 +1283,7 @@
.globl ret_from_fork
ret_from_fork:
call schedule_tail
- mov %g3, %o0
+ ld [%g3 + TI_TASK], %o0
b ret_sys_call
ld [%sp + STACKFRAME_SZ + PT_I0], %o0
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 6addb91..56db064 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -107,7 +107,7 @@
return hp;
}
-static void mdesc_memblock_free(struct mdesc_handle *hp)
+static void __init mdesc_memblock_free(struct mdesc_handle *hp)
{
unsigned int alloc_size;
unsigned long start;
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index 3d70f83..d29a32f 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -496,7 +496,7 @@
return err;
}
-static struct of_device_id __initdata fire_match[] = {
+static const struct of_device_id fire_match[] = {
{
.name = "pci",
.compatible = "pciex108e,80f0",
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 56ee745..86ae08d 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -592,7 +592,7 @@
return err;
}
-static struct of_device_id __initdata psycho_match[] = {
+static const struct of_device_id psycho_match[] = {
{
.name = "pci",
.compatible = "pci108e,8000",
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 2857073..948068a 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -581,7 +581,7 @@
return err;
}
-static struct of_device_id __initdata sabre_match[] = {
+static const struct of_device_id sabre_match[] = {
{
.name = "pci",
.compatible = "pci108e,a001",
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 1d41af7..fecfcb2 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -1470,7 +1470,7 @@
* and pci108e,8001. So list the chips in reverse chronological
* order.
*/
-static struct of_device_id __initdata schizo_match[] = {
+static const struct of_device_id schizo_match[] = {
{
.name = "pci",
.compatible = "pci108e,a801",
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 6cf5346..b01a06e 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -998,7 +998,7 @@
return err;
}
-static struct of_device_id __initdata pci_sun4v_match[] = {
+static const struct of_device_id pci_sun4v_match[] = {
{
.name = "pci",
.compatible = "SUNW,sun4v-pci",
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index cd725fe2..cb4c0f5 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -52,7 +52,7 @@
return 0;
}
-static struct of_device_id __initdata power_match[] = {
+static const struct of_device_id power_match[] = {
{
.name = "power",
},
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 4b86eaf..47ac73c 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-
+/*335*/ .long sys_syncfs
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 0331baf..4f3170c 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,6 +85,7 @@
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
+ .word sys_syncfs
#endif /* CONFIG_COMPAT */
@@ -161,3 +162,4 @@
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
+ .word sys_syncfs
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 95ec25f..2b8d54b 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -442,7 +442,7 @@
return platform_device_register(&rtc_cmos_device);
}
-static struct of_device_id __initdata rtc_match[] = {
+static const struct of_device_id rtc_match[] = {
{
.name = "rtc",
.compatible = "m5819",
@@ -487,7 +487,7 @@
return platform_device_register(&rtc_bq4802_device);
}
-static struct of_device_id __initdata bq4802_match[] = {
+static const struct of_device_id bq4802_match[] = {
{
.name = "rtc",
.compatible = "bq4802",
@@ -552,7 +552,7 @@
return platform_device_register(&m48t59_rtc);
}
-static struct of_device_id __initdata mostek_match[] = {
+static const struct of_device_id mostek_match[] = {
{
.name = "eeprom",
},
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 5e34a9f..6e2cdd5 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,7 +11,6 @@
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
# FIXME: investigate whether we need/want these options.
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 109ddc0..a923483 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -7,7 +7,6 @@
bool
default y
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
config MMU
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 04e0249..d3a3032 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -10,7 +10,6 @@
select HAVE_KERNEL_LZMA
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select ARCH_WANT_FRAME_POINTERS
help
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
index e08d6d3..76a8bee 100644
--- a/arch/unicore32/Makefile
+++ b/arch/unicore32/Makefile
@@ -48,7 +48,7 @@
ASM_GENERIC_HEADERS += cputime.h current.h
ASM_GENERIC_HEADERS += device.h div64.h
ASM_GENERIC_HEADERS += emergency-restart.h errno.h
-ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h
+ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h futex.h
ASM_GENERIC_HEADERS += hardirq.h hw_irq.h
ASM_GENERIC_HEADERS += ioctl.h ioctls.h ipcbuf.h irq_regs.h
ASM_GENERIC_HEADERS += kdebug.h kmap_types.h
diff --git a/arch/unicore32/include/asm/futex.h b/arch/unicore32/include/asm/futex.h
deleted file mode 100644
index 07dea61..0000000
--- a/arch/unicore32/include/asm/futex.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/unicore32/include/asm/futex.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __UNICORE_FUTEX_H__
-#define __UNICORE_FUTEX_H__
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/preempt.h>
-#include <linux/uaccess.h>
-#include <linux/errno.h>
-
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
- __asm__ __volatile__( \
- "1: ldw.u %1, [%2]\n" \
- " " insn "\n" \
- "2: stw.u %0, [%2]\n" \
- " mov %0, #0\n" \
- "3:\n" \
- " .pushsection __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 4f, 2b, 4f\n" \
- " .popsection\n" \
- " .pushsection .fixup,\"ax\"\n" \
- "4: mov %0, %4\n" \
- " b 3b\n" \
- " .popsection" \
- : "=&r" (ret), "=&r" (oldval) \
- : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
- : "cc", "memory")
-
-static inline int
-futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
-{
- int op = (encoded_op >> 28) & 7;
- int cmp = (encoded_op >> 24) & 15;
- int oparg = (encoded_op << 8) >> 20;
- int cmparg = (encoded_op << 20) >> 20;
- int oldval = 0, ret;
-
- if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
- oparg = 1 << oparg;
-
- if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
- return -EFAULT;
-
- pagefault_disable(); /* implies preempt_disable() */
-
- switch (op) {
- case FUTEX_OP_SET:
- __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
- break;
- case FUTEX_OP_ADD:
- __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
- break;
- case FUTEX_OP_OR:
- __futex_atomic_op("or %0, %1, %3", ret, oldval, uaddr, oparg);
- break;
- case FUTEX_OP_ANDN:
- __futex_atomic_op("and %0, %1, %3",
- ret, oldval, uaddr, ~oparg);
- break;
- case FUTEX_OP_XOR:
- __futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg);
- break;
- default:
- ret = -ENOSYS;
- }
-
- pagefault_enable(); /* subsumes preempt_enable() */
-
- if (!ret) {
- switch (cmp) {
- case FUTEX_OP_CMP_EQ:
- ret = (oldval == cmparg);
- break;
- case FUTEX_OP_CMP_NE:
- ret = (oldval != cmparg);
- break;
- case FUTEX_OP_CMP_LT:
- ret = (oldval < cmparg);
- break;
- case FUTEX_OP_CMP_GE:
- ret = (oldval >= cmparg);
- break;
- case FUTEX_OP_CMP_LE:
- ret = (oldval <= cmparg);
- break;
- case FUTEX_OP_CMP_GT:
- ret = (oldval > cmparg);
- break;
- default:
- ret = -ENOSYS;
- }
- }
- return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
- int val;
-
- if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
- return -EFAULT;
-
- pagefault_disable(); /* implies preempt_disable() */
-
- __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
- "1: ldw.u %0, [%3]\n"
- " cmpxor.a %0, %1\n"
- " bne 3f\n"
- "2: stw.u %2, [%3]\n"
- "3:\n"
- " .pushsection __ex_table,\"a\"\n"
- " .align 3\n"
- " .long 1b, 4f, 2b, 4f\n"
- " .popsection\n"
- " .pushsection .fixup,\"ax\"\n"
- "4: mov %0, %4\n"
- " b 3b\n"
- " .popsection"
- : "=&r" (val)
- : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
- : "cc", "memory");
-
- pagefault_enable(); /* subsumes preempt_enable() */
-
- return val;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __UNICORE_FUTEX_H__ */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
index a18bdc3..8040d57 100644
--- a/arch/unicore32/include/mach/PKUnity.h
+++ b/arch/unicore32/include/mach/PKUnity.h
@@ -24,16 +24,6 @@
#define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
/*
- * PKUNITY Memory Map Addresses: 0x0D000000 - 0x0EFFFFFF (32MB)
- * 0x0D000000 - 0x0DFFFFFF 16MB: for UVC
- * 0x0E000000 - 0x0EFFFFFF 16MB: for UNIGFX
- */
-#define PKUNITY_UVC_MMAP_BASE 0x0D000000
-#define PKUNITY_UVC_MMAP_SIZE 0x01000000 /* 16MB */
-#define PKUNITY_UNIGFX_MMAP_BASE 0x0E000000
-#define PKUNITY_UNIGFX_MMAP_SIZE 0x01000000 /* 16MB */
-
-/*
* PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
* 0x80000000 - 0x8000000B 12B PCI Configuration regs
* 0x80010000 - 0x80010250 592B PCI Bridge Base
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
index 0bf21c9..4be72c2 100644
--- a/arch/unicore32/include/mach/memory.h
+++ b/arch/unicore32/include/mach/memory.h
@@ -50,7 +50,6 @@
/* kuser area */
#define KUSER_VECPAGE_BASE (KUSER_BASE + UL(0x3fff0000))
-#define KUSER_UNIGFX_BASE (PAGE_OFFSET + PKUNITY_UNIGFX_MMAP_BASE)
/* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
#define kuser_vecpage_to_vectors(x) ((x) - (KUSER_VECPAGE_BASE) \
+ (VECTORS_BASE))
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
index 8b1b6be..1a505a7 100644
--- a/arch/unicore32/kernel/puv3-core.c
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -99,11 +99,6 @@
.end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = PKUNITY_UNIGFX_MMAP_BASE,
- .end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE,
- .flags = IORESOURCE_MEM,
- },
};
static struct resource puv3_rtc_resources[] = {
diff --git a/arch/unicore32/kernel/rtc.c b/arch/unicore32/kernel/rtc.c
index c5f0682..8cad70b 100644
--- a/arch/unicore32/kernel/rtc.c
+++ b/arch/unicore32/kernel/rtc.c
@@ -88,11 +88,6 @@
return 0;
}
-static int puv3_rtc_setfreq(struct device *dev, int freq)
-{
- return 0;
-}
-
/* Time read/write */
static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
@@ -214,8 +209,6 @@
.set_time = puv3_rtc_settime,
.read_alarm = puv3_rtc_getalarm,
.set_alarm = puv3_rtc_setalarm,
- .irq_set_freq = puv3_rtc_setfreq,
- .irq_set_state = puv3_rtc_setpie,
.proc = puv3_rtc_proc,
};
@@ -294,8 +287,6 @@
puv3_rtc_enable(pdev, 1);
- puv3_rtc_setfreq(&pdev->dev, 1);
-
/* register RTC and exit */
rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 1e175a8..471b6bc 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -64,12 +64,6 @@
*/
static struct resource mem_res[] = {
{
- .name = "Video RAM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_MEM
- },
- {
.name = "Kernel text",
.start = 0,
.end = 0,
@@ -83,9 +77,8 @@
}
};
-#define video_ram mem_res[0]
-#define kernel_code mem_res[1]
-#define kernel_data mem_res[2]
+#define kernel_code mem_res[0]
+#define kernel_data mem_res[1]
/*
* These functions re-use the assembly code in head.S, which
@@ -224,10 +217,6 @@
kernel_data.end <= res->end)
request_resource(res, &kernel_data);
}
-
- video_ram.start = PKUNITY_UNIGFX_MMAP_BASE;
- video_ram.end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE;
- request_resource(&iomem_resource, &video_ram);
}
static void (*init_machine)(void) __initdata;
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
index 25abbb1..254e36f 100644
--- a/arch/unicore32/kernel/traps.c
+++ b/arch/unicore32/kernel/traps.c
@@ -22,7 +22,6 @@
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/init.h>
-#include <linux/uaccess.h>
#include <linux/atomic.h>
#include <linux/unistd.h>
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
index 0b4eb89..9bf7f7a 100644
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -14,6 +14,7 @@
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/page.h>
+#include <asm/cache.h>
OUTPUT_ARCH(unicore32)
ENTRY(stext)
@@ -29,7 +30,7 @@
HEAD_TEXT_SECTION
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
- PERCPU(PAGE_SIZE)
+ PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
__init_end = .;
_stext = .;
@@ -45,10 +46,10 @@
_sdata = .;
RO_DATA_SECTION(PAGE_SIZE)
- RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
_edata = .;
- EXCEPTION_TABLE(32)
+ EXCEPTION_TABLE(L1_CACHE_BYTES)
NOTES
BSS_SECTION(0, 0, 0)
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
index 7bf3d58..db2d334 100644
--- a/arch/unicore32/mm/mmu.c
+++ b/arch/unicore32/mm/mmu.c
@@ -338,15 +338,6 @@
* and can only be in node 0.
*/
memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
-
-#ifdef CONFIG_PUV3_UNIGFX
- /*
- * These should likewise go elsewhere. They pre-reserve the
- * screen/video memory region at the 48M~64M of main system memory.
- */
- memblock_reserve(PKUNITY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE);
- memblock_reserve(PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE);
-#endif
}
/*
@@ -371,17 +362,6 @@
pmd_clear(pmd_off_k(addr));
/*
- * Create a mapping for UniGFX VRAM
- */
-#ifdef CONFIG_PUV3_UNIGFX
- map.pfn = __phys_to_pfn(PKUNITY_UNIGFX_MMAP_BASE);
- map.virtual = KUSER_UNIGFX_BASE;
- map.length = PKUNITY_UNIGFX_MMAP_SIZE;
- map.type = MT_KUSER;
- create_mapping(&map);
-#endif
-
- /*
* Create a mapping for the machine vectors at the high-vectors
* location (0xffff0000). If we aren't using high-vectors, also
* create a mapping at the low-vectors virtual address.
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index a279d98..2b7d573 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -2,7 +2,6 @@
#define _ASM_X86_APIC_H
#include <linux/cpumask.h>
-#include <linux/delay.h>
#include <linux/pm.h>
#include <asm/alternative.h>
diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 97b6d81..057099e 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -10,7 +10,6 @@
#include <linux/spinlock.h> /* And spinlocks */
#include <asm/io.h> /* need byte IO */
-#include <linux/delay.h>
#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
#define dma_outb outb_p
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 6801959..4c39baa 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -21,7 +21,7 @@
EXPORT_SYMBOL(amd_nb_misc_ids);
static struct pci_device_id amd_nb_link_ids[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{}
};
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 1293c70..cd1ffed 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -316,7 +316,7 @@
irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
/* APB timer irqs are set up as mp_irqs, timer is edge type */
- __set_irq_handler(adev->irq, handle_edge_irq, 0, "edge");
+ __irq_set_handler(adev->irq, handle_edge_irq, 0, "edge");
if (system_state == SYSTEM_BOOTING) {
if (request_irq(adev->irq, apbt_interrupt_handler,
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index c4e557a..5260fe9 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -16,6 +16,7 @@
#include <linux/kprobes.h>
#include <linux/nmi.h>
#include <linux/module.h>
+#include <linux/delay.h>
#ifdef CONFIG_HARDLOCKUP_DETECTOR
u64 hw_nmi_get_sample_period(void)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 3c28928..33b10a0 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -23,6 +23,8 @@
#include <linux/io.h>
#include <linux/pci.h>
#include <linux/kdebug.h>
+#include <linux/delay.h>
+#include <linux/crash_dump.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
@@ -34,6 +36,7 @@
#include <asm/ipi.h>
#include <asm/smp.h>
#include <asm/x86_init.h>
+#include <asm/emergency-restart.h>
DEFINE_PER_CPU(int, x2apic_extra_bits);
@@ -810,4 +813,11 @@
/* register Legacy VGA I/O redirection handler */
pci_register_set_vga_state(uv_set_vga_state);
+
+ /*
+ * For a kdump kernel the reset must be BOOT_ACPI, not BOOT_EFI, as
+ * EFI is not enabled in the kdump kernel.
+ */
+ if (is_kdump_kernel())
+ reboot_type = BOOT_ACPI;
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5a05ef6..3385ea2 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1626,7 +1626,7 @@
static unsigned int mce_poll(struct file *file, poll_table *wait)
{
poll_wait(file, &mce_wait, wait);
- if (rcu_dereference_check_mce(mcelog.next))
+ if (rcu_access_index(mcelog.next))
return POLLIN | POLLRDNORM;
if (!mce_apei_read_done && apei_check_mce())
return POLLIN | POLLRDNORM;
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 307dfbb..929739a 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -293,14 +293,24 @@
/*
* HACK!
- * We use this same function to initialize the mtrrs on boot.
- * The state of the boot cpu's mtrrs has been saved, and we want
- * to replicate across all the APs.
- * If we're doing that @reg is set to something special...
+ *
+ * We use this same function to initialize the mtrrs during boot,
+ * resume, runtime cpu online and on an explicit request to set a
+ * specific MTRR.
+ *
+ * During boot or suspend, the state of the boot cpu's mtrrs has been
+ * saved, and we want to replicate that across all the cpus that come
+ * online (either at the end of boot or resume or during a runtime cpu
+ * online). If we're doing that, @reg is set to something special and on
+ * this cpu we still do mtrr_if->set_all(). During boot/resume, this
+ * is unnecessary if at this point we are still on the cpu that started
+ * the boot/resume sequence. But there is no guarantee that we are still
+ * on the same cpu. So we do mtrr_if->set_all() on this cpu aswell to be
+ * sure that we are in sync with everyone else.
*/
if (reg != ~0U)
mtrr_if->set(reg, base, size, type);
- else if (!mtrr_aps_delayed_init)
+ else
mtrr_if->set_all();
/* Wait for the others */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 948a31e..1cb0b9f 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -8,6 +8,7 @@
#include <linux/seq_file.h>
#include <linux/smp.h>
#include <linux/ftrace.h>
+#include <linux/delay.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 5ed0ab5..f924280 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -550,6 +550,7 @@
microcode_dev_exit();
unregister_hotcpu_notifier(&mc_cpu_notifier);
+ unregister_syscore_ops(&mc_syscore_ops);
get_online_cpus();
mutex_lock(µcode_mutex);
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d3ce37e..08c44b0 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -6,6 +6,7 @@
#include <linux/dmi.h>
#include <linux/sched.h>
#include <linux/tboot.h>
+#include <linux/delay.h>
#include <acpi/reboot.h>
#include <asm/io.h>
#include <asm/apic.h>
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 8dace18..cf97500 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -49,6 +49,10 @@
val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
val |= (counter_config->unit_mask & 0xFF) << 8;
+ counter_config->extra &= (ARCH_PERFMON_EVENTSEL_INV |
+ ARCH_PERFMON_EVENTSEL_EDGE |
+ ARCH_PERFMON_EVENTSEL_CMASK);
+ val |= counter_config->extra;
event &= model->event_mask ? model->event_mask : 0xFF;
val |= event & 0xFF;
val |= (event & 0x0F00) << 24;
@@ -440,6 +444,7 @@
oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ oprofilefs_create_ulong(sb, dir, "extra", &counter_config[i].extra);
}
return 0;
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index e28398d..0b7b7b1 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -22,6 +22,7 @@
unsigned long kernel;
unsigned long user;
unsigned long unit_mask;
+ unsigned long extra;
};
extern struct op_counter_config counter_config[];
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index a7b38d3..7cb6424 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -11,6 +11,7 @@
#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <asm/mmu_context.h>
#include <asm/uv/uv.h>
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 1d730b5..7c275f5 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -9,7 +9,6 @@
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
- select GENERIC_HARDIRQS_NO_DEPRECATED
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
index a2a73d9..b86d7e2 100644
--- a/drivers/ata/pata_palmld.c
+++ b/drivers/ata/pata_palmld.c
@@ -33,6 +33,11 @@
#define DRV_NAME "pata_palmld"
+static struct gpio palmld_hdd_gpios[] = {
+ { GPIO_NR_PALMLD_IDE_PWEN, GPIOF_INIT_HIGH, "HDD Power" },
+ { GPIO_NR_PALMLD_IDE_RESET, GPIOF_INIT_LOW, "HDD Reset" },
+};
+
static struct scsi_host_template palmld_sht = {
ATA_PIO_SHT(DRV_NAME),
};
@@ -52,28 +57,23 @@
/* allocate host */
host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- return -ENOMEM;
+ if (!host) {
+ ret = -ENOMEM;
+ goto err1;
+ }
/* remap drive's physical memory address */
mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
- if (!mem)
- return -ENOMEM;
+ if (!mem) {
+ ret = -ENOMEM;
+ goto err1;
+ }
/* request and activate power GPIO, IRQ GPIO */
- ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+ ret = gpio_request_array(palmld_hdd_gpios,
+ ARRAY_SIZE(palmld_hdd_gpios));
if (ret)
goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
- if (ret)
- goto err3;
/* reset the drive */
gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
@@ -96,13 +96,15 @@
ata_sff_std_ports(&ap->ioaddr);
/* activate host */
- return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+ ret = ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
&palmld_sht);
+ if (ret)
+ goto err2;
-err3:
- gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+ return ret;
+
err2:
- gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+ gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
err1:
return ret;
}
@@ -116,8 +118,7 @@
/* power down the HDD */
gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
- gpio_free(GPIO_NR_PALMLD_IDE_RESET);
- gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+ gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
return 0;
}
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 9c595e3..adc9358 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1297,7 +1297,7 @@
/**
* Search EDID for CEA extension block.
*/
-static u8 *drm_find_cea_extension(struct edid *edid)
+u8 *drm_find_cea_extension(struct edid *edid)
{
u8 *edid_ext = NULL;
int i;
@@ -1318,6 +1318,7 @@
return edid_ext;
}
+EXPORT_SYMBOL(drm_find_cea_extension);
/**
* drm_detect_hdmi_monitor - detect whether monitor is hdmi.
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5daa991..f5b0d83 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -39,7 +39,7 @@
ret__ = -ETIMEDOUT; \
break; \
} \
- if (W && !in_dbg_master()) msleep(W); \
+ if (W && !(in_atomic() || in_dbg_master())) msleep(W); \
} \
ret__; \
})
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 82d04c5..d3b903b 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -259,7 +259,7 @@
if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
- return 0;
+ goto clear_err;
val = I915_READ(GMBUS3 + reg_offset);
do {
@@ -287,7 +287,7 @@
if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
- return 0;
+ goto clear_err;
val = loop = 0;
do {
@@ -302,14 +302,31 @@
if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
- return 0;
+ goto clear_err;
}
- return num;
+ goto done;
+
+clear_err:
+ /* Toggle the Software Clear Interrupt bit. This has the effect
+ * of resetting the GMBUS controller and so clearing the
+ * BUS_ERROR raised by the slave's NAK.
+ */
+ I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
+ I915_WRITE(GMBUS1 + reg_offset, 0);
+
+done:
+ /* Mark the GMBUS interface as disabled. We will re-enable it at the
+ * start of the next xfer, till then let it sleep.
+ */
+ I915_WRITE(GMBUS0 + reg_offset, 0);
+ return i;
timeout:
DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
bus->reg0 & 0xff, bus->adapter.name);
+ I915_WRITE(GMBUS0 + reg_offset, 0);
+
/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);
if (!bus->force_bit)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 1a311ad..86cd30b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -473,19 +473,13 @@
intel_lvds_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
- enum drm_connector_status status = connector_status_connected;
+ enum drm_connector_status status;
status = intel_panel_detect(dev);
if (status != connector_status_unknown)
return status;
- /* ACPI lid methods were generally unreliable in this generation, so
- * don't even bother.
- */
- if (IS_GEN2(dev) || IS_GEN3(dev))
- return connector_status_connected;
-
- return status;
+ return connector_status_connected;
}
/**
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index e8b04f4..b52e460 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -97,7 +97,7 @@
return -ENOMEM;
}
- nvbo->bo.persistant_swap_storage = nvbo->gem->filp;
+ nvbo->bo.persistent_swap_storage = nvbo->gem->filp;
nvbo->gem->driver_private = nvbo;
return 0;
}
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 10e41af..b41ec59 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1009,6 +1009,7 @@
uint64_t fb_location;
uint32_t fb_format, fb_pitch_pixels, tiling_flags;
u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE);
+ u32 tmp;
int r;
/* no fb bound */
@@ -1137,6 +1138,15 @@
WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
(crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+ /* pageflip setup */
+ /* make sure flip is at vb rather than hb */
+ tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
+ tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
+ WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
+
+ /* set pageflip to happen anywhere in vblank interval */
+ WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+
if (!atomic && fb && fb != crtc->fb) {
radeon_fb = to_radeon_framebuffer(fb);
rbo = gem_to_radeon_bo(radeon_fb->obj);
@@ -1167,6 +1177,7 @@
uint64_t fb_location;
uint32_t fb_format, fb_pitch_pixels, tiling_flags;
u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE;
+ u32 tmp;
int r;
/* no fb bound */
@@ -1294,6 +1305,15 @@
WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
(crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+ /* pageflip setup */
+ /* make sure flip is at vb rather than hb */
+ tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
+ tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
+ WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
+
+ /* set pageflip to happen anywhere in vblank interval */
+ WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+
if (!atomic && fb && fb != crtc->fb) {
radeon_fb = to_radeon_framebuffer(fb);
rbo = gem_to_radeon_bo(radeon_fb->obj);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 941080a..0b0cc74 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -43,17 +43,6 @@
void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc)
{
- struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc];
- u32 tmp;
-
- /* make sure flip is at vb rather than hb */
- tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
- tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
- WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
-
- /* set pageflip to happen anywhere in vblank interval */
- WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
-
/* enable the pflip int */
radeon_irq_kms_pflip_irq_get(rdev, crtc);
}
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 02d5c41..99768d9 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -675,7 +675,8 @@
ATOM_ENCODER_CAP_RECORD *cap_record;
u16 caps = 0;
- while (record->ucRecordType > 0 &&
+ while (record->ucRecordSize > 0 &&
+ record->ucRecordType > 0 &&
record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
switch (record->ucRecordType) {
case ATOM_ENCODER_CAP_RECORD_TYPE:
@@ -720,7 +721,8 @@
break;
}
- while (record->ucRecordType > 0 &&
+ while (record->ucRecordSize > 0 &&
+ record->ucRecordType > 0 &&
record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
switch (record->ucRecordType) {
case ATOM_I2C_RECORD_TYPE:
@@ -782,10 +784,9 @@
ATOM_HPD_INT_RECORD *hpd_record;
ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
- while (record->ucRecordType > 0
- && record->
- ucRecordType <=
- ATOM_MAX_OBJECT_RECORD_NUMBER) {
+ while (record->ucRecordSize > 0 &&
+ record->ucRecordType > 0 &&
+ record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
switch (record->ucRecordType) {
case ATOM_I2C_RECORD_TYPE:
i2c_record =
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index cf602e2..8caf546 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2079,6 +2079,19 @@
DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I,
&hpd);
+ /* TV - TV DAC */
+ ddc_i2c.valid = false;
+ hpd.hpd = RADEON_HPD_NONE;
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_enum(dev,
+ ATOM_DEVICE_TV1_SUPPORT,
+ 2),
+ ATOM_DEVICE_TV1_SUPPORT);
+ radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+ DRM_MODE_CONNECTOR_SVIDEO,
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO,
+ &hpd);
break;
default:
DRM_INFO("Connector table: %d (invalid)\n",
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 19763f5..876cebc 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -48,17 +48,6 @@
void rs600_pre_page_flip(struct radeon_device *rdev, int crtc)
{
- struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc];
- u32 tmp;
-
- /* make sure flip is at vb rather than hb */
- tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
- tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
- WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
-
- /* set pageflip to happen anywhere in vblank interval */
- WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
-
/* enable the pflip int */
radeon_irq_kms_pflip_irq_get(rdev, crtc);
}
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 0b6a55a..2e618b5 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1168,7 +1168,7 @@
uint32_t page_alignment,
unsigned long buffer_start,
bool interruptible,
- struct file *persistant_swap_storage,
+ struct file *persistent_swap_storage,
size_t acc_size,
void (*destroy) (struct ttm_buffer_object *))
{
@@ -1211,7 +1211,7 @@
bo->priv_flags = 0;
bo->mem.placement = (TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED);
bo->seq_valid = false;
- bo->persistant_swap_storage = persistant_swap_storage;
+ bo->persistent_swap_storage = persistent_swap_storage;
bo->acc_size = acc_size;
atomic_inc(&bo->glob->bo_count);
@@ -1260,7 +1260,7 @@
uint32_t page_alignment,
unsigned long buffer_start,
bool interruptible,
- struct file *persistant_swap_storage,
+ struct file *persistent_swap_storage,
struct ttm_buffer_object **p_bo)
{
struct ttm_buffer_object *bo;
@@ -1282,7 +1282,7 @@
ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
buffer_start, interruptible,
- persistant_swap_storage, acc_size, NULL);
+ persistent_swap_storage, acc_size, NULL);
if (likely(ret == 0))
*p_bo = bo;
@@ -1863,7 +1863,7 @@
if (bo->bdev->driver->swap_notify)
bo->bdev->driver->swap_notify(bo);
- ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
+ ret = ttm_tt_swapout(bo->ttm, bo->persistent_swap_storage);
out:
/**
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 86d5b17..90e23e0 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -332,7 +332,7 @@
ttm_tt_free_page_directory(ttm);
}
- if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP) &&
+ if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP) &&
ttm->swap_storage)
fput(ttm->swap_storage);
@@ -503,7 +503,7 @@
page_cache_release(from_page);
}
- if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP))
+ if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP))
fput(swap_storage);
ttm->swap_storage = NULL;
ttm->page_flags &= ~TTM_PAGE_FLAG_SWAPPED;
@@ -514,7 +514,7 @@
return ret;
}
-int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
+int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage)
{
struct address_space *swap_space;
struct file *swap_storage;
@@ -540,7 +540,7 @@
return 0;
}
- if (!persistant_swap_storage) {
+ if (!persistent_swap_storage) {
swap_storage = shmem_file_setup("ttm swap",
ttm->num_pages << PAGE_SHIFT,
0);
@@ -549,7 +549,7 @@
return PTR_ERR(swap_storage);
}
} else
- swap_storage = persistant_swap_storage;
+ swap_storage = persistent_swap_storage;
swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
@@ -577,12 +577,12 @@
ttm_tt_free_alloced_pages(ttm);
ttm->swap_storage = swap_storage;
ttm->page_flags |= TTM_PAGE_FLAG_SWAPPED;
- if (persistant_swap_storage)
- ttm->page_flags |= TTM_PAGE_FLAG_PERSISTANT_SWAP;
+ if (persistent_swap_storage)
+ ttm->page_flags |= TTM_PAGE_FLAG_PERSISTENT_SWAP;
return 0;
out_err:
- if (!persistant_swap_storage)
+ if (!persistent_swap_storage)
fput(swap_storage);
return ret;
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 97e22be..de58191 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -154,4 +154,4 @@
MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("J Keerthy");
-MODULE_ALIAS("twl4030_madc_hwmon");
+MODULE_ALIAS("platform:twl4030_madc_hwmon");
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bca2af2..c987033 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -153,7 +153,7 @@
static struct i2c_adapter * u3_1;
static struct i2c_adapter * k2;
static struct i2c_client * fcu;
-static struct cpu_pid_state cpu_state[2];
+static struct cpu_pid_state processor_state[2];
static struct basckside_pid_params backside_params;
static struct backside_pid_state backside_state;
static struct drives_pid_state drives_state;
@@ -664,8 +664,8 @@
static void fetch_cpu_pumps_minmax(void)
{
- struct cpu_pid_state *state0 = &cpu_state[0];
- struct cpu_pid_state *state1 = &cpu_state[1];
+ struct cpu_pid_state *state0 = &processor_state[0];
+ struct cpu_pid_state *state1 = &processor_state[1];
u16 pump_min = 0, pump_max = 0xffff;
u16 tmp[4];
@@ -717,17 +717,17 @@
return sprintf(buf, "%d", data); \
}
-BUILD_SHOW_FUNC_FIX(cpu0_temperature, cpu_state[0].last_temp)
-BUILD_SHOW_FUNC_FIX(cpu0_voltage, cpu_state[0].voltage)
-BUILD_SHOW_FUNC_FIX(cpu0_current, cpu_state[0].current_a)
-BUILD_SHOW_FUNC_INT(cpu0_exhaust_fan_rpm, cpu_state[0].rpm)
-BUILD_SHOW_FUNC_INT(cpu0_intake_fan_rpm, cpu_state[0].intake_rpm)
+BUILD_SHOW_FUNC_FIX(cpu0_temperature, processor_state[0].last_temp)
+BUILD_SHOW_FUNC_FIX(cpu0_voltage, processor_state[0].voltage)
+BUILD_SHOW_FUNC_FIX(cpu0_current, processor_state[0].current_a)
+BUILD_SHOW_FUNC_INT(cpu0_exhaust_fan_rpm, processor_state[0].rpm)
+BUILD_SHOW_FUNC_INT(cpu0_intake_fan_rpm, processor_state[0].intake_rpm)
-BUILD_SHOW_FUNC_FIX(cpu1_temperature, cpu_state[1].last_temp)
-BUILD_SHOW_FUNC_FIX(cpu1_voltage, cpu_state[1].voltage)
-BUILD_SHOW_FUNC_FIX(cpu1_current, cpu_state[1].current_a)
-BUILD_SHOW_FUNC_INT(cpu1_exhaust_fan_rpm, cpu_state[1].rpm)
-BUILD_SHOW_FUNC_INT(cpu1_intake_fan_rpm, cpu_state[1].intake_rpm)
+BUILD_SHOW_FUNC_FIX(cpu1_temperature, processor_state[1].last_temp)
+BUILD_SHOW_FUNC_FIX(cpu1_voltage, processor_state[1].voltage)
+BUILD_SHOW_FUNC_FIX(cpu1_current, processor_state[1].current_a)
+BUILD_SHOW_FUNC_INT(cpu1_exhaust_fan_rpm, processor_state[1].rpm)
+BUILD_SHOW_FUNC_INT(cpu1_intake_fan_rpm, processor_state[1].intake_rpm)
BUILD_SHOW_FUNC_FIX(backside_temperature, backside_state.last_temp)
BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm)
@@ -919,8 +919,8 @@
static void do_monitor_cpu_combined(void)
{
- struct cpu_pid_state *state0 = &cpu_state[0];
- struct cpu_pid_state *state1 = &cpu_state[1];
+ struct cpu_pid_state *state0 = &processor_state[0];
+ struct cpu_pid_state *state1 = &processor_state[1];
s32 temp0, power0, temp1, power1;
s32 temp_combi, power_combi;
int rc, intake, pump;
@@ -1150,7 +1150,7 @@
/*
* Initialize the state structure for one CPU control loop
*/
-static int init_cpu_state(struct cpu_pid_state *state, int index)
+static int init_processor_state(struct cpu_pid_state *state, int index)
{
int err;
@@ -1205,7 +1205,7 @@
/*
* Dispose of the state data for one CPU control loop
*/
-static void dispose_cpu_state(struct cpu_pid_state *state)
+static void dispose_processor_state(struct cpu_pid_state *state)
{
if (state->monitor == NULL)
return;
@@ -1804,9 +1804,9 @@
set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM);
/* Initialize ADCs */
- initialize_adc(&cpu_state[0]);
- if (cpu_state[1].monitor != NULL)
- initialize_adc(&cpu_state[1]);
+ initialize_adc(&processor_state[0]);
+ if (processor_state[1].monitor != NULL)
+ initialize_adc(&processor_state[1]);
fcu_tickle_ticks = FCU_TICKLE_TICKS;
@@ -1833,14 +1833,14 @@
if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
do_monitor_cpu_combined();
else if (cpu_pid_type == CPU_PID_TYPE_RACKMAC) {
- do_monitor_cpu_rack(&cpu_state[0]);
- if (cpu_state[1].monitor != NULL)
- do_monitor_cpu_rack(&cpu_state[1]);
+ do_monitor_cpu_rack(&processor_state[0]);
+ if (processor_state[1].monitor != NULL)
+ do_monitor_cpu_rack(&processor_state[1]);
// better deal with UP
} else {
- do_monitor_cpu_split(&cpu_state[0]);
- if (cpu_state[1].monitor != NULL)
- do_monitor_cpu_split(&cpu_state[1]);
+ do_monitor_cpu_split(&processor_state[0]);
+ if (processor_state[1].monitor != NULL)
+ do_monitor_cpu_split(&processor_state[1]);
// better deal with UP
}
/* Then, the rest */
@@ -1885,8 +1885,8 @@
*/
static void dispose_control_loops(void)
{
- dispose_cpu_state(&cpu_state[0]);
- dispose_cpu_state(&cpu_state[1]);
+ dispose_processor_state(&processor_state[0]);
+ dispose_processor_state(&processor_state[1]);
dispose_backside_state(&backside_state);
dispose_drives_state(&drives_state);
dispose_slots_state(&slots_state);
@@ -1928,12 +1928,12 @@
/* Create control loops for everything. If any fail, everything
* fails
*/
- if (init_cpu_state(&cpu_state[0], 0))
+ if (init_processor_state(&processor_state[0], 0))
goto fail;
if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
fetch_cpu_pumps_minmax();
- if (cpu_count > 1 && init_cpu_state(&cpu_state[1], 1))
+ if (cpu_count > 1 && init_processor_state(&processor_state[1], 1))
goto fail;
if (init_backside_state(&backside_state))
goto fail;
diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 64454d3..ecfd9fb 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -1494,12 +1494,17 @@
}
memset(&fm_st_proto, 0, sizeof(fm_st_proto));
- fm_st_proto.type = ST_FM;
fm_st_proto.recv = fm_st_receive;
fm_st_proto.match_packet = NULL;
fm_st_proto.reg_complete_cb = fm_st_reg_comp_cb;
fm_st_proto.write = NULL; /* TI ST driver will fill write pointer */
fm_st_proto.priv_data = fmdev;
+ fm_st_proto.chnl_id = 0x08;
+ fm_st_proto.max_frame_size = 0xff;
+ fm_st_proto.hdr_len = 1;
+ fm_st_proto.offset_len_in_hdr = 0;
+ fm_st_proto.len_size = 1;
+ fm_st_proto.reserve = 1;
ret = st_register(&fm_st_proto);
if (ret == -EINPROGRESS) {
@@ -1532,7 +1537,7 @@
g_st_write = fm_st_proto.write;
} else {
fmerr("Failed to get ST write func pointer\n");
- ret = st_unregister(ST_FM);
+ ret = st_unregister(&fm_st_proto);
if (ret < 0)
fmerr("st_unregister failed %d\n", ret);
return -EAGAIN;
@@ -1586,6 +1591,7 @@
*/
u32 fmc_release(struct fmdev *fmdev)
{
+ static struct st_proto_s fm_st_proto;
u32 ret;
if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
@@ -1604,7 +1610,11 @@
fmdev->resp_comp = NULL;
fmdev->rx.freq = 0;
- ret = st_unregister(ST_FM);
+ memset(&fm_st_proto, 0, sizeof(fm_st_proto));
+ fm_st_proto.chnl_id = 0x08;
+
+ ret = st_unregister(&fm_st_proto);
+
if (ret < 0)
fmerr("Failed to de-register FM from ST %d\n", ret);
else
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index ac0e42b..accaf6c 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -41,6 +41,7 @@
#include <linux/bitops.h>
#include <media/rc-core.h>
#include <linux/pci_ids.h>
+#include <linux/delay.h>
#include "ite-cir.h"
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index a520395..443cb7f 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -34,14 +34,24 @@
#define COLIBRI320_DETECT_GPIO 81
#define COLIBRI320_READY_GPIO 29
-static struct {
- int reset_gpio;
- int ppen_gpio;
- int bvd1_gpio;
- int bvd2_gpio;
- int detect_gpio;
- int ready_gpio;
-} colibri_pcmcia_gpio;
+enum {
+ DETECT = 0,
+ READY = 1,
+ BVD1 = 2,
+ BVD2 = 3,
+ PPEN = 4,
+ RESET = 5,
+};
+
+/* Contents of this array are configured on-the-fly in init function */
+static struct gpio colibri_pcmcia_gpios[] = {
+ { 0, GPIOF_IN, "PCMCIA Detect" },
+ { 0, GPIOF_IN, "PCMCIA Ready" },
+ { 0, GPIOF_IN, "PCMCIA BVD1" },
+ { 0, GPIOF_IN, "PCMCIA BVD2" },
+ { 0, GPIOF_INIT_LOW, "PCMCIA PPEN" },
+ { 0, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
static struct pcmcia_irqs colibri_irqs[] = {
{
@@ -54,88 +64,42 @@
{
int ret;
- ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+ ret = gpio_request_array(colibri_pcmcia_gpios,
+ ARRAY_SIZE(colibri_pcmcia_gpios));
if (ret)
goto err1;
- ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
- if (ret)
- goto err2;
- ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
- if (ret)
- goto err2;
- ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
- if (ret)
- goto err3;
+ colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
+ skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
- ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
- if (ret)
- goto err3;
- ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
- if (ret)
- goto err4;
-
- ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
- if (ret)
- goto err4;
- ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
- if (ret)
- goto err5;
-
- ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
- if (ret)
- goto err5;
- ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
- if (ret)
- goto err6;
-
- ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
- if (ret)
- goto err6;
- ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
- if (ret)
- goto err7;
-
- colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
- skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
-
- return soc_pcmcia_request_irqs(skt, colibri_irqs,
+ ret = soc_pcmcia_request_irqs(skt, colibri_irqs,
ARRAY_SIZE(colibri_irqs));
+ if (ret)
+ goto err2;
-err7:
- gpio_free(colibri_pcmcia_gpio.detect_gpio);
-err6:
- gpio_free(colibri_pcmcia_gpio.ready_gpio);
-err5:
- gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
-err4:
- gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
-err3:
- gpio_free(colibri_pcmcia_gpio.reset_gpio);
+ return ret;
+
err2:
- gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+ gpio_free_array(colibri_pcmcia_gpios,
+ ARRAY_SIZE(colibri_pcmcia_gpios));
err1:
return ret;
}
static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(colibri_pcmcia_gpio.detect_gpio);
- gpio_free(colibri_pcmcia_gpio.ready_gpio);
- gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
- gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
- gpio_free(colibri_pcmcia_gpio.reset_gpio);
- gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+ gpio_free_array(colibri_pcmcia_gpios,
+ ARRAY_SIZE(colibri_pcmcia_gpios));
}
static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
- state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
- state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
- state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+ state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
+ state->ready = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
+ state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
+ state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
@@ -145,9 +109,10 @@
colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+ gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
!(state->Vcc == 33 && state->Vpp < 50));
- gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+ gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
+ state->flags & SS_RESET);
return 0;
}
@@ -190,20 +155,20 @@
/* Colibri PXA270 */
if (machine_is_colibri()) {
- colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO;
- colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO;
- colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO;
- colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO;
- colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO;
- colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO;
+ colibri_pcmcia_gpios[RESET].gpio = COLIBRI270_RESET_GPIO;
+ colibri_pcmcia_gpios[PPEN].gpio = COLIBRI270_PPEN_GPIO;
+ colibri_pcmcia_gpios[BVD1].gpio = COLIBRI270_BVD1_GPIO;
+ colibri_pcmcia_gpios[BVD2].gpio = COLIBRI270_BVD2_GPIO;
+ colibri_pcmcia_gpios[DETECT].gpio = COLIBRI270_DETECT_GPIO;
+ colibri_pcmcia_gpios[READY].gpio = COLIBRI270_READY_GPIO;
/* Colibri PXA320 */
} else if (machine_is_colibri320()) {
- colibri_pcmcia_gpio.reset_gpio = COLIBRI320_RESET_GPIO;
- colibri_pcmcia_gpio.ppen_gpio = COLIBRI320_PPEN_GPIO;
- colibri_pcmcia_gpio.bvd1_gpio = COLIBRI320_BVD1_GPIO;
- colibri_pcmcia_gpio.bvd2_gpio = COLIBRI320_BVD2_GPIO;
- colibri_pcmcia_gpio.detect_gpio = COLIBRI320_DETECT_GPIO;
- colibri_pcmcia_gpio.ready_gpio = COLIBRI320_READY_GPIO;
+ colibri_pcmcia_gpios[RESET].gpio = COLIBRI320_RESET_GPIO;
+ colibri_pcmcia_gpios[PPEN].gpio = COLIBRI320_PPEN_GPIO;
+ colibri_pcmcia_gpios[BVD1].gpio = COLIBRI320_BVD1_GPIO;
+ colibri_pcmcia_gpios[BVD2].gpio = COLIBRI320_BVD2_GPIO;
+ colibri_pcmcia_gpios[DETECT].gpio = COLIBRI320_DETECT_GPIO;
+ colibri_pcmcia_gpios[READY].gpio = COLIBRI320_READY_GPIO;
}
ret = platform_device_add_data(colibri_pcmcia_device,
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 6fb6f7f..69f7367 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -4,7 +4,7 @@
* Driver for Palm LifeDrive PCMCIA
*
* Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -20,49 +20,27 @@
#include <mach/palmld.h>
#include "soc_common.h"
+static struct gpio palmld_pcmcia_gpios[] = {
+ { GPIO_NR_PALMLD_PCMCIA_POWER, GPIOF_INIT_LOW, "PCMCIA Power" },
+ { GPIO_NR_PALMLD_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+ { GPIO_NR_PALMLD_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
+};
+
static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
- if (ret)
- goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
- if (ret)
- goto err3;
- ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
- if (ret)
- goto err4;
+ ret = gpio_request_array(palmld_pcmcia_gpios,
+ ARRAY_SIZE(palmld_pcmcia_gpios));
skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
- return 0;
-err4:
- gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
-err3:
- gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
-err2:
- gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
-err1:
return ret;
}
static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
- gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
- gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+ gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
}
static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 459a232..d0ad6a7 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -4,7 +4,7 @@
* Driver for Palm Tungsten|C PCMCIA
*
* Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,79 +21,30 @@
#include <mach/palmtc.h>
#include "soc_common.h"
+static struct gpio palmtc_pcmcia_gpios[] = {
+ { GPIO_NR_PALMTC_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" },
+ { GPIO_NR_PALMTC_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" },
+ { GPIO_NR_PALMTC_PCMCIA_POWER3, GPIOF_INIT_LOW, "PCMCIA Power 3" },
+ { GPIO_NR_PALMTC_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+ { GPIO_NR_PALMTC_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
+ { GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN, "PCMCIA Power Ready" },
+};
+
static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
- if (ret)
- goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
- if (ret)
- goto err3;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
- if (ret)
- goto err4;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
- if (ret)
- goto err4;
- ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
- if (ret)
- goto err5;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
- if (ret)
- goto err5;
- ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
- if (ret)
- goto err6;
-
- ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
- if (ret)
- goto err6;
- ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
- if (ret)
- goto err7;
+ ret = gpio_request_array(palmtc_pcmcia_gpios,
+ ARRAY_SIZE(palmtc_pcmcia_gpios));
skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
- return 0;
-err7:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-err6:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
-err5:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
-err4:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
-err3:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
-err2:
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
-err1:
return ret;
}
static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
- gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+ gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
}
static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index b07b247..1a25804 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -3,7 +3,7 @@
*
* Driver for Palm T|X PCMCIA
*
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,67 +13,34 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
-
-#include <mach/gpio.h>
#include <mach/palmtx.h>
-
#include "soc_common.h"
+static struct gpio palmtx_pcmcia_gpios[] = {
+ { GPIO_NR_PALMTX_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" },
+ { GPIO_NR_PALMTX_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" },
+ { GPIO_NR_PALMTX_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
+ { GPIO_NR_PALMTX_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
+};
+
static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
- if (ret)
- goto err1;
- ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
- if (ret)
- goto err3;
- ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
- if (ret)
- goto err4;
-
- ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
- if (ret)
- goto err4;
- ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
- if (ret)
- goto err5;
+ ret = gpio_request_array(palmtx_pcmcia_gpios,
+ ARRAY_SIZE(palmtx_pcmcia_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
- return 0;
-err5:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
-err4:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
-err3:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
-err2:
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
-err1:
return ret;
}
static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
- gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
- gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+ gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
}
static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 55627ec..435002d 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -3,8 +3,7 @@
*
* Driver for Voipac PXA270 PCMCIA and CF sockets
*
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,6 +21,19 @@
#include "soc_common.h"
+static struct gpio vpac270_pcmcia_gpios[] = {
+ { GPIO84_VPAC270_PCMCIA_CD, GPIOF_IN, "PCMCIA Card Detect" },
+ { GPIO35_VPAC270_PCMCIA_RDY, GPIOF_IN, "PCMCIA Ready" },
+ { GPIO107_VPAC270_PCMCIA_PPEN, GPIOF_INIT_LOW, "PCMCIA PPEN" },
+ { GPIO11_VPAC270_PCMCIA_RESET, GPIOF_INIT_LOW, "PCMCIA Reset" },
+};
+
+static struct gpio vpac270_cf_gpios[] = {
+ { GPIO17_VPAC270_CF_CD, GPIOF_IN, "CF Card Detect" },
+ { GPIO12_VPAC270_CF_RDY, GPIOF_IN, "CF Ready" },
+ { GPIO16_VPAC270_CF_RESET, GPIOF_INIT_LOW, "CF Reset" },
+};
+
static struct pcmcia_irqs cd_irqs[] = {
{
.sock = 0,
@@ -40,96 +52,34 @@
int ret;
if (skt->nr == 0) {
- ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD);
- if (ret)
- goto err2;
-
- ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY");
- if (ret)
- goto err2;
- ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY);
- if (ret)
- goto err3;
-
- ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN");
- if (ret)
- goto err3;
- ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0);
- if (ret)
- goto err4;
-
- ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET");
- if (ret)
- goto err4;
- ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0);
- if (ret)
- goto err5;
+ ret = gpio_request_array(vpac270_pcmcia_gpios,
+ ARRAY_SIZE(vpac270_pcmcia_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
- return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
-
-err5:
- gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
-err4:
- gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
-err3:
- gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
-err2:
- gpio_free(GPIO84_VPAC270_PCMCIA_CD);
-err1:
- return ret;
-
+ if (!ret)
+ ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
} else {
- ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD");
- if (ret)
- goto err6;
- ret = gpio_direction_input(GPIO17_VPAC270_CF_CD);
- if (ret)
- goto err7;
-
- ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY");
- if (ret)
- goto err7;
- ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY);
- if (ret)
- goto err8;
-
- ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET");
- if (ret)
- goto err8;
- ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0);
- if (ret)
- goto err9;
+ ret = gpio_request_array(vpac270_cf_gpios,
+ ARRAY_SIZE(vpac270_cf_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
- return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
-
-err9:
- gpio_free(GPIO16_VPAC270_CF_RESET);
-err8:
- gpio_free(GPIO12_VPAC270_CF_RDY);
-err7:
- gpio_free(GPIO17_VPAC270_CF_CD);
-err6:
- return ret;
-
+ if (!ret)
+ ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
}
+
+ return ret;
}
static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
- gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
- gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
- gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
- gpio_free(GPIO84_VPAC270_PCMCIA_CD);
- gpio_free(GPIO16_VPAC270_CF_RESET);
- gpio_free(GPIO12_VPAC270_CF_RDY);
- gpio_free(GPIO17_VPAC270_CF_CD);
+ if (skt->nr == 0)
+ gpio_request_array(vpac270_pcmcia_gpios,
+ ARRAY_SIZE(vpac270_pcmcia_gpios));
+ else
+ gpio_request_array(vpac270_cf_gpios,
+ ARRAY_SIZE(vpac270_cf_gpios));
}
static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index b86bc32..332a2c4 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -319,7 +319,7 @@
return IRQ_NONE;
}
-static int __init
+static int __devinit
vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
{
int retval = 0;
@@ -391,7 +391,7 @@
spin_unlock_irq(&rtc_lock);
}
-static void __exit rtc_mrst_do_remove(struct device *dev)
+static void __devexit rtc_mrst_do_remove(struct device *dev)
{
struct mrst_rtc *mrst = dev_get_drvdata(dev);
struct resource *iomem;
@@ -500,14 +500,14 @@
#endif
-static int __init vrtc_mrst_platform_probe(struct platform_device *pdev)
+static int __devinit vrtc_mrst_platform_probe(struct platform_device *pdev)
{
return vrtc_mrst_do_probe(&pdev->dev,
platform_get_resource(pdev, IORESOURCE_MEM, 0),
platform_get_irq(pdev, 0));
}
-static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev)
+static int __devexit vrtc_mrst_platform_remove(struct platform_device *pdev)
{
rtc_mrst_do_remove(&pdev->dev);
return 0;
@@ -525,7 +525,7 @@
static struct platform_driver vrtc_mrst_platform_driver = {
.probe = vrtc_mrst_platform_probe,
- .remove = __exit_p(vrtc_mrst_platform_remove),
+ .remove = __devexit_p(vrtc_mrst_platform_remove),
.shutdown = vrtc_mrst_platform_shutdown,
.driver = {
.name = (char *) driver_name,
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 0571ef9..9f4b58b 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -138,6 +138,7 @@
#include <linux/spinlock.h>
#include <linux/stat.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
index df36a42..5b93485 100644
--- a/drivers/sh/intc/internals.h
+++ b/drivers/sh/intc/internals.h
@@ -86,7 +86,7 @@
static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
{
- struct irq_chip *chip = get_irq_chip(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
return container_of(chip, struct intc_desc_int, chip);
}
@@ -103,7 +103,7 @@
set_irq_flags(irq, IRQF_VALID);
#else
/* same effect on other architectures */
- set_irq_noprobe(irq);
+ irq_set_noprobe(irq);
#endif
}
diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c
index 6b633b1..8763088 100644
--- a/drivers/staging/altera-stapl/altera-jtag.c
+++ b/drivers/staging/altera-stapl/altera-jtag.c
@@ -23,6 +23,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <staging/altera.h>
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 428f4fe..0ad3288 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -95,6 +95,7 @@
{
/* tty->read_cnt is not read locked ? */
int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ int old_left;
/*
* If we are doing input canonicalization, and there are no
@@ -104,7 +105,12 @@
*/
if (left <= 0)
left = tty->icanon && !tty->canon_data;
+ old_left = tty->receive_room;
tty->receive_room = left;
+
+ /* Did this open up the receive buffer? We may need to flip */
+ if (left && !old_left)
+ schedule_work(&tty->buf.work);
}
static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e1aee37..80484af 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1506,7 +1506,7 @@
config SERIAL_GRLIB_GAISLER_APBUART
tristate "GRLIB APBUART serial support"
- depends on OF
+ depends on OF && SPARC
select SERIAL_CORE
---help---
Add support for the GRLIB APBUART serial port.
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 1ab999b..19a9436 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -555,10 +555,9 @@
static int __devinit apbuart_probe(struct platform_device *op)
{
- int i = -1;
+ int i;
struct uart_port *port = NULL;
- i = 0;
for (i = 0; i < grlib_apbuart_port_nr; i++) {
if (op->dev.of_node == grlib_apbuart_nodes[i])
break;
@@ -566,6 +565,7 @@
port = &grlib_apbuart_ports[i];
port->dev = &op->dev;
+ port->irq = op->archdata.irqs[0];
uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
@@ -598,24 +598,12 @@
static int grlib_apbuart_configure(void)
{
- struct device_node *np, *rp;
- const u32 *prop;
- int freq_khz, line = 0;
-
- /* Get bus frequency */
- rp = of_find_node_by_path("/");
- if (!rp)
- return -ENODEV;
- rp = of_get_next_child(rp, NULL);
- if (!rp)
- return -ENODEV;
- prop = of_get_property(rp, "clock-frequency", NULL);
- if (!prop)
- return -ENODEV;
- freq_khz = *prop;
+ struct device_node *np;
+ int line = 0;
for_each_matching_node(np, apbuart_match) {
- const int *irqs, *ampopts;
+ const int *ampopts;
+ const u32 *freq_hz;
const struct amba_prom_registers *regs;
struct uart_port *port;
unsigned long addr;
@@ -623,11 +611,11 @@
ampopts = of_get_property(np, "ampopts", NULL);
if (ampopts && (*ampopts == 0))
continue; /* Ignore if used by another OS instance */
-
- irqs = of_get_property(np, "interrupts", NULL);
regs = of_get_property(np, "reg", NULL);
+ /* Frequency of APB Bus is frequency of UART */
+ freq_hz = of_get_property(np, "freq", NULL);
- if (!irqs || !regs)
+ if (!regs || !freq_hz || (*freq_hz == 0))
continue;
grlib_apbuart_nodes[line] = np;
@@ -638,12 +626,12 @@
port->mapbase = addr;
port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
- port->irq = *irqs;
+ port->irq = 0;
port->iotype = UPIO_MEM;
port->ops = &grlib_apbuart_ops;
port->flags = UPF_BOOT_AUTOCONF;
port->line = line;
- port->uartclk = freq_khz * 1000;
+ port->uartclk = *freq_hz;
port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
line++;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index b945121..f1a7918 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -442,10 +442,8 @@
line discipline as we want to empty the queue */
if (test_bit(TTY_FLUSHPENDING, &tty->flags))
break;
- if (!tty->receive_room || seen_tail) {
- schedule_work(&tty->buf.work);
+ if (!tty->receive_room || seen_tail)
break;
- }
if (count > tty->receive_room)
count = tty->receive_room;
char_buf = head->char_buf_ptr + head->read;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index b37f92c..444b60a 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,24 +139,6 @@
static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
static void nuke (struct pxa25x_ep *, int status);
-/* one GPIO should be used to detect VBUS from the host */
-static int is_vbus_present(void)
-{
- struct pxa2xx_udc_mach_info *mach = the_controller->mach;
-
- if (gpio_is_valid(mach->gpio_vbus)) {
- int value = gpio_get_value(mach->gpio_vbus);
-
- if (mach->gpio_vbus_inverted)
- return !value;
- else
- return !!value;
- }
- if (mach->udc_is_connected)
- return mach->udc_is_connected();
- return 1;
-}
-
/* one GPIO should control a D+ pullup, so host sees this device (or not) */
static void pullup_off(void)
{
@@ -1055,7 +1037,7 @@
"%s version: %s\nGadget driver: %s\nHost %s\n\n",
driver_name, DRIVER_VERSION SIZE_STR "(pio)",
dev->driver ? dev->driver->driver.name : "(none)",
- is_vbus_present() ? "full speed" : "disconnected");
+ dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
/* registers for device and ep0 */
seq_printf(m,
@@ -1094,7 +1076,7 @@
(tmp & UDCCFR_ACM) ? " acm" : "");
}
- if (!is_vbus_present() || !dev->driver)
+ if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
goto done;
seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
@@ -1435,14 +1417,6 @@
#endif
-static irqreturn_t udc_vbus_irq(int irq, void *_dev)
-{
- struct pxa25x_udc *dev = _dev;
-
- pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
- return IRQ_HANDLED;
-}
-
/*-------------------------------------------------------------------------*/
@@ -1766,12 +1740,9 @@
if (unlikely(udccr & UDCCR_SUSIR)) {
udc_ack_int_UDCCR(UDCCR_SUSIR);
handled = 1;
- DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
- ? "" : "+disconnect");
+ DBG(DBG_VERBOSE, "USB suspend\n");
- if (!is_vbus_present())
- stop_activity(dev, dev->driver);
- else if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->suspend)
dev->driver->suspend(&dev->gadget);
@@ -1786,8 +1757,7 @@
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
- && dev->driver->resume
- && is_vbus_present())
+ && dev->driver->resume)
dev->driver->resume(&dev->gadget);
}
@@ -2137,7 +2107,7 @@
static int __init pxa25x_udc_probe(struct platform_device *pdev)
{
struct pxa25x_udc *dev = &memory;
- int retval, vbus_irq, irq;
+ int retval, irq;
u32 chiprev;
/* insist on Intel/ARM/XScale */
@@ -2199,19 +2169,6 @@
dev->transceiver = otg_get_transceiver();
- if (gpio_is_valid(dev->mach->gpio_vbus)) {
- if ((retval = gpio_request(dev->mach->gpio_vbus,
- "pxa25x_udc GPIO VBUS"))) {
- dev_dbg(&pdev->dev,
- "can't get vbus gpio %d, err: %d\n",
- dev->mach->gpio_vbus, retval);
- goto err_gpio_vbus;
- }
- gpio_direction_input(dev->mach->gpio_vbus);
- vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
- } else
- vbus_irq = 0;
-
if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
@@ -2237,7 +2194,7 @@
udc_disable(dev);
udc_reinit(dev);
- dev->vbus = !!is_vbus_present();
+ dev->vbus = 0;
/* irq setup after old hardware state is cleaned up */
retval = request_irq(irq, pxa25x_udc_irq,
@@ -2273,22 +2230,10 @@
}
} else
#endif
- if (vbus_irq) {
- retval = request_irq(vbus_irq, udc_vbus_irq,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- driver_name, dev);
- if (retval != 0) {
- pr_err("%s: can't get irq %i, err %d\n",
- driver_name, vbus_irq, retval);
- goto err_vbus_irq;
- }
- }
create_debug_files(dev);
return 0;
- err_vbus_irq:
#ifdef CONFIG_ARCH_LUBBOCK
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
err_irq_lub:
@@ -2298,9 +2243,6 @@
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (gpio_is_valid(dev->mach->gpio_vbus))
- gpio_free(dev->mach->gpio_vbus);
- err_gpio_vbus:
if (dev->transceiver) {
otg_put_transceiver(dev->transceiver);
dev->transceiver = NULL;
@@ -2337,10 +2279,6 @@
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (gpio_is_valid(dev->mach->gpio_vbus)) {
- free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
- gpio_free(dev->mach->gpio_vbus);
- }
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d2c0196..ba0d287 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -106,7 +106,7 @@
static int mct_u232_tiocmget(struct tty_struct *tty);
static int mct_u232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
-static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int mct_u232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static int mct_u232_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
@@ -874,7 +874,7 @@
}
}
-static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int mct_u232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
DEFINE_WAIT(wait);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f609..a1dd4d4 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -413,7 +413,7 @@
return result;
}
-static int opticon_tiocmset(struct tty_struct *tty, struct file *file,
+static int opticon_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index dbd2dc4..27f2c57 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/vmalloc.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/fb.h>
@@ -531,7 +530,7 @@
return -EINVAL;
}
- writel(PKUNITY_UNIGFX_MMAP_BASE, UDE_FSA);
+ writel(info->fix.smem_start, UDE_FSA);
writel(info->var.yres, UDE_LS);
writel(get_line_length(info->var.xres,
info->var.bits_per_pixel) >> 3, UDE_PS);
@@ -680,13 +679,27 @@
struct fb_info *info;
u32 unifb_regs[UNIFB_REGS_NUM];
int retval = -ENOMEM;
- struct resource *iomem, *mapmem;
+ struct resource *iomem;
+ void *videomemory;
+
+ videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP,
+ get_order(UNIFB_MEMSIZE));
+ if (!videomemory)
+ goto err;
+
+ memset(videomemory, 0, UNIFB_MEMSIZE);
+
+ unifb_fix.smem_start = virt_to_phys(videomemory);
+ unifb_fix.smem_len = UNIFB_MEMSIZE;
+
+ iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ unifb_fix.mmio_start = iomem->start;
info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
if (!info)
goto err;
- info->screen_base = (char __iomem *)KUSER_UNIGFX_BASE;
+ info->screen_base = (char __iomem *)videomemory;
info->fbops = &unifb_ops;
retval = fb_find_mode(&info->var, info, NULL,
@@ -695,13 +708,6 @@
if (!retval || (retval == 4))
info->var = unifb_default;
- iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
- unifb_fix.mmio_start = iomem->start;
-
- mapmem = platform_get_resource(dev, IORESOURCE_MEM, 1);
- unifb_fix.smem_start = mapmem->start;
- unifb_fix.smem_len = UNIFB_MEMSIZE;
-
info->fix = unifb_fix;
info->pseudo_palette = info->par;
info->par = NULL;
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 825b665..a2e5b51 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -627,7 +627,12 @@
static void overlay1fb_disable(struct pxafb_layer *ofb)
{
- uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+ uint32_t lccr5;
+
+ if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
+ return;
+
+ lccr5 = lcd_readl(ofb->fbi, LCCR5);
lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
@@ -685,7 +690,12 @@
static void overlay2fb_disable(struct pxafb_layer *ofb)
{
- uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+ uint32_t lccr5;
+
+ if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
+ return;
+
+ lccr5 = lcd_readl(ofb->fbi, LCCR5);
lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
@@ -720,12 +730,10 @@
if (user == 0)
return -ENODEV;
- /* allow only one user at a time */
- if (atomic_inc_and_test(&ofb->usage))
- return -EBUSY;
+ if (ofb->usage++ == 0)
+ /* unblank the base framebuffer */
+ fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
- /* unblank the base framebuffer */
- fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
return 0;
}
@@ -733,12 +741,15 @@
{
struct pxafb_layer *ofb = (struct pxafb_layer*) info;
- atomic_dec(&ofb->usage);
- ofb->ops->disable(ofb);
+ if (ofb->usage == 1) {
+ ofb->ops->disable(ofb);
+ ofb->fb.var.height = -1;
+ ofb->fb.var.width = -1;
+ ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
+ ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
- free_pages_exact(ofb->video_mem, ofb->video_mem_size);
- ofb->video_mem = NULL;
- ofb->video_mem_size = 0;
+ ofb->usage--;
+ }
return 0;
}
@@ -750,7 +761,7 @@
int xpos, ypos, pfor, bpp;
xpos = NONSTD_TO_XPOS(var->nonstd);
- ypos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_YPOS(var->nonstd);
pfor = NONSTD_TO_PFOR(var->nonstd);
bpp = pxafb_var_to_bpp(var);
@@ -794,7 +805,7 @@
return 0;
}
-static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
+static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
{
struct fb_var_screeninfo *var = &ofb->fb.var;
int pfor = NONSTD_TO_PFOR(var->nonstd);
@@ -812,27 +823,11 @@
size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
- /* don't re-allocate if the original video memory is enough */
if (ofb->video_mem) {
if (ofb->video_mem_size >= size)
return 0;
-
- free_pages_exact(ofb->video_mem, ofb->video_mem_size);
}
-
- ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
- if (ofb->video_mem == NULL)
- return -ENOMEM;
-
- ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
- ofb->video_mem_size = size;
-
- mutex_lock(&ofb->fb.mm_lock);
- ofb->fb.fix.smem_start = ofb->video_mem_phys;
- ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual;
- mutex_unlock(&ofb->fb.mm_lock);
- ofb->fb.screen_base = ofb->video_mem;
- return 0;
+ return -EINVAL;
}
static int overlayfb_set_par(struct fb_info *info)
@@ -841,13 +836,13 @@
struct fb_var_screeninfo *var = &info->var;
int xpos, ypos, pfor, bpp, ret;
- ret = overlayfb_map_video_memory(ofb);
+ ret = overlayfb_check_video_memory(ofb);
if (ret)
return ret;
bpp = pxafb_var_to_bpp(var);
xpos = NONSTD_TO_XPOS(var->nonstd);
- ypos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_YPOS(var->nonstd);
pfor = NONSTD_TO_PFOR(var->nonstd);
ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
@@ -891,7 +886,7 @@
ofb->id = id;
ofb->ops = &ofb_ops[id];
- atomic_set(&ofb->usage, 0);
+ ofb->usage = 0;
ofb->fbi = fbi;
init_completion(&ofb->branch_done);
}
@@ -904,29 +899,60 @@
return 0;
}
-static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
+static int __devinit pxafb_overlay_map_video_memory(struct pxafb_info *pxafb,
+ struct pxafb_layer *ofb)
+{
+ /* We assume that user will use at most video_mem_size for overlay fb,
+ * anyway, it's useless to use 16bpp main plane and 24bpp overlay
+ */
+ ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
+ GFP_KERNEL | __GFP_ZERO);
+ if (ofb->video_mem == NULL)
+ return -ENOMEM;
+
+ ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
+ ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
+
+ mutex_lock(&ofb->fb.mm_lock);
+ ofb->fb.fix.smem_start = ofb->video_mem_phys;
+ ofb->fb.fix.smem_len = pxafb->video_mem_size;
+ mutex_unlock(&ofb->fb.mm_lock);
+
+ ofb->fb.screen_base = ofb->video_mem;
+
+ return 0;
+}
+
+static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
{
int i, ret;
if (!pxafb_overlay_supported())
- return 0;
+ return;
for (i = 0; i < 2; i++) {
- init_pxafb_overlay(fbi, &fbi->overlay[i], i);
- ret = register_framebuffer(&fbi->overlay[i].fb);
+ struct pxafb_layer *ofb = &fbi->overlay[i];
+ init_pxafb_overlay(fbi, ofb, i);
+ ret = register_framebuffer(&ofb->fb);
if (ret) {
dev_err(fbi->dev, "failed to register overlay %d\n", i);
- return ret;
+ continue;
}
+ ret = pxafb_overlay_map_video_memory(fbi, ofb);
+ if (ret) {
+ dev_err(fbi->dev,
+ "failed to map video memory for overlay %d\n",
+ i);
+ unregister_framebuffer(&ofb->fb);
+ continue;
+ }
+ ofb->registered = 1;
}
/* mask all IU/BS/EOF/SOF interrupts */
lcd_writel(fbi, LCCR5, ~0);
- /* place overlay(s) on top of base */
- fbi->lccr0 |= LCCR0_OUC;
pr_info("PXA Overlay driver loaded successfully!\n");
- return 0;
}
static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
@@ -936,8 +962,15 @@
if (!pxafb_overlay_supported())
return;
- for (i = 0; i < 2; i++)
- unregister_framebuffer(&fbi->overlay[i].fb);
+ for (i = 0; i < 2; i++) {
+ struct pxafb_layer *ofb = &fbi->overlay[i];
+ if (ofb->registered) {
+ if (ofb->video_mem)
+ free_pages_exact(ofb->video_mem,
+ ofb->video_mem_size);
+ unregister_framebuffer(&ofb->fb);
+ }
+ }
}
#else
static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
@@ -1368,7 +1401,8 @@
(lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
(lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
(lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
- (lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))
+ ((fbi->lccr0 & LCCR0_SDS) &&
+ (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
pxafb_schedule_work(fbi, C_REENABLE);
return 0;
@@ -1420,7 +1454,8 @@
lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
- lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
+ if (fbi->lccr0 & LCCR0_SDS)
+ lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
}
@@ -1613,7 +1648,8 @@
switch (val) {
case CPUFREQ_PRECHANGE:
- set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+ if (!fbi->overlay[0].usage && !fbi->overlay[1].usage)
+ set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
break;
case CPUFREQ_POSTCHANGE:
@@ -1806,6 +1842,12 @@
pxafb_decode_mach_info(fbi, inf);
+#ifdef CONFIG_FB_PXA_OVERLAY
+ /* place overlay(s) on top of base */
+ if (pxafb_overlay_supported())
+ fbi->lccr0 |= LCCR0_OUC;
+#endif
+
init_waitqueue_head(&fbi->ctrlr_wait);
INIT_WORK(&fbi->task, pxafb_task);
mutex_init(&fbi->ctrlr_lock);
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 2353521..26ba9fa 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -92,7 +92,8 @@
struct pxafb_layer {
struct fb_info fb;
int id;
- atomic_t usage;
+ int registered;
+ uint32_t usage;
uint32_t control[2];
struct pxafb_layer_ops *ops;
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index a1ee8fa..f60b07b 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -3215,9 +3215,15 @@
{
struct ceph_mds_client *mdsc = fsc->mdsc;
+ dout("mdsc_destroy %p\n", mdsc);
ceph_mdsc_stop(mdsc);
+
+ /* flush out any connection work with references to us */
+ ceph_msgr_flush();
+
fsc->mdsc = NULL;
kfree(mdsc);
+ dout("mdsc_destroy %p done\n", mdsc);
}
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index a9e78b4..f2f77fd 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -353,7 +353,7 @@
if (opt->name)
seq_printf(m, ",name=%s", opt->name);
- if (opt->secret)
+ if (opt->key)
seq_puts(m, ",secret=<hidden>");
if (opt->mount_timeout != CEPH_MOUNT_TIMEOUT_DEFAULT)
diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index 93589fc..397e732 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -72,10 +72,9 @@
/*
* check to see if the page is mapped already (no holes)
*/
- if (PageMappedToDisk(page)) {
- unlock_page(page);
+ if (PageMappedToDisk(page))
goto mapped;
- }
+
if (page_has_buffers(page)) {
struct buffer_head *bh, *head;
int fully_mapped = 1;
@@ -90,7 +89,6 @@
if (fully_mapped) {
SetPageMappedToDisk(page);
- unlock_page(page);
goto mapped;
}
}
@@ -105,16 +103,17 @@
return VM_FAULT_SIGBUS;
ret = block_page_mkwrite(vma, vmf, nilfs_get_block);
- if (unlikely(ret)) {
+ if (ret != VM_FAULT_LOCKED) {
nilfs_transaction_abort(inode->i_sb);
return ret;
}
+ nilfs_set_file_dirty(inode, 1 << (PAGE_SHIFT - inode->i_blkbits));
nilfs_transaction_commit(inode->i_sb);
mapped:
SetPageChecked(page);
wait_on_page_writeback(page);
- return 0;
+ return VM_FAULT_LOCKED;
}
static const struct vm_operations_struct nilfs_file_vm_ops = {
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 856e8e4..a8dd344 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -114,19 +114,19 @@
* Macros to check inode numbers
*/
#define NILFS_MDT_INO_BITS \
- ((unsigned int)(1 << NILFS_DAT_INO | 1 << NILFS_CPFILE_INO | \
- 1 << NILFS_SUFILE_INO | 1 << NILFS_IFILE_INO | \
- 1 << NILFS_ATIME_INO | 1 << NILFS_SKETCH_INO))
+ ((unsigned int)(1 << NILFS_DAT_INO | 1 << NILFS_CPFILE_INO | \
+ 1 << NILFS_SUFILE_INO | 1 << NILFS_IFILE_INO | \
+ 1 << NILFS_ATIME_INO | 1 << NILFS_SKETCH_INO))
#define NILFS_SYS_INO_BITS \
- ((unsigned int)(1 << NILFS_ROOT_INO) | NILFS_MDT_INO_BITS)
+ ((unsigned int)(1 << NILFS_ROOT_INO) | NILFS_MDT_INO_BITS)
#define NILFS_FIRST_INO(sb) (((struct the_nilfs *)sb->s_fs_info)->ns_first_ino)
#define NILFS_MDT_INODE(sb, ino) \
- ((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & (1 << (ino))))
+ ((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & (1 << (ino))))
#define NILFS_VALID_INODE(sb, ino) \
- ((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & (1 << (ino))))
+ ((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & (1 << (ino))))
/**
* struct nilfs_transaction_info: context information for synchronization
@@ -285,7 +285,7 @@
extern void nilfs_error(struct super_block *, const char *, const char *, ...)
__attribute__ ((format (printf, 3, 4)));
extern void nilfs_warning(struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
+ __attribute__ ((format (printf, 3, 4)));
extern struct nilfs_super_block *
nilfs_read_super_block(struct super_block *, u64, int, struct buffer_head **);
extern int nilfs_store_magic_and_option(struct super_block *,
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 4d2a1ee..9d2dc6b 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -495,12 +495,14 @@
void nilfs_mapping_init(struct address_space *mapping,
struct backing_dev_info *bdi)
{
+ static const struct address_space_operations empty_aops;
+
mapping->host = NULL;
mapping->flags = 0;
mapping_set_gfp_mask(mapping, GFP_NOFS);
mapping->assoc_mapping = NULL;
mapping->backing_dev_info = bdi;
- mapping->a_ops = NULL;
+ mapping->a_ops = &empty_aops;
}
/*
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index f2d2faf..e5a3f58 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -194,6 +194,13 @@
#ifdef CONFIG_SMP
# define WARN_ON_SMP(x) WARN_ON(x)
#else
+/*
+ * Use of ({0;}) because WARN_ON_SMP(x) may be used either as
+ * a stand alone line statement or as a condition in an if ()
+ * statement.
+ * A simple "0" would cause gcc to give a "statement has no effect"
+ * warning.
+ */
# define WARN_ON_SMP(x) ({0;})
#endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 60edf9b..aaec097 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -778,6 +778,7 @@
void *data, struct drm_file *file_priv);
extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
+extern u8 *drm_find_cea_extension(struct edid *edid);
extern bool drm_detect_hdmi_monitor(struct edid *edid);
extern bool drm_detect_monitor_audio(struct edid *edid);
extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 820ee90..816e30c 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -472,6 +472,8 @@
{0x1002, 0x9803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9804, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 50852aa..a6bd117 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -158,9 +158,9 @@
* the object is destroyed.
* @event_queue: Queue for processes waiting on buffer object status change.
* @mem: structure describing current placement.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
* pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object.
+ * holds a pointer to a persistent shmem object.
* @ttm: TTM structure holding system pages.
* @evicted: Whether the object was evicted without user-space knowing.
* @cpu_writes: For synchronization. Number of cpu writers.
@@ -221,7 +221,7 @@
*/
struct ttm_mem_reg mem;
- struct file *persistant_swap_storage;
+ struct file *persistent_swap_storage;
struct ttm_tt *ttm;
bool evicted;
@@ -459,9 +459,9 @@
* user buffer object.
* @interruptible: If needing to sleep to wait for GPU resources,
* sleep interruptible.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
* pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object. Typically, this would
+ * holds a pointer to a persistent shmem object. Typically, this would
* point to the shmem object backing a GEM object if TTM is used to back a
* GEM user interface.
* @acc_size: Accounted size for this object.
@@ -490,7 +490,7 @@
uint32_t page_alignment,
unsigned long buffer_start,
bool interrubtible,
- struct file *persistant_swap_storage,
+ struct file *persistent_swap_storage,
size_t acc_size,
void (*destroy) (struct ttm_buffer_object *));
/**
@@ -506,9 +506,9 @@
* user buffer object.
* @interruptible: If needing to sleep while waiting for GPU resources,
* sleep interruptible.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
* pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object. Typically, this would
+ * holds a pointer to a persistent shmem object. Typically, this would
* point to the shmem object backing a GEM object if TTM is used to back a
* GEM user interface.
* @p_bo: On successful completion *p_bo points to the created object.
@@ -528,7 +528,7 @@
uint32_t page_alignment,
unsigned long buffer_start,
bool interruptible,
- struct file *persistant_swap_storage,
+ struct file *persistent_swap_storage,
struct ttm_buffer_object **p_bo);
/**
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index efed082..960b521 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -122,7 +122,7 @@
#define TTM_PAGE_FLAG_USER_DIRTY (1 << 2)
#define TTM_PAGE_FLAG_WRITE (1 << 3)
#define TTM_PAGE_FLAG_SWAPPED (1 << 4)
-#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
+#define TTM_PAGE_FLAG_PERSISTENT_SWAP (1 << 5)
#define TTM_PAGE_FLAG_ZERO_ALLOC (1 << 6)
#define TTM_PAGE_FLAG_DMA32 (1 << 7)
@@ -714,7 +714,7 @@
*/
extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement);
extern int ttm_tt_swapout(struct ttm_tt *ttm,
- struct file *persistant_swap_storage);
+ struct file *persistent_swap_storage);
/*
* ttm_bo.c
diff --git a/include/keys/ceph-type.h b/include/keys/ceph-type.h
new file mode 100644
index 0000000..f69c4ac
--- /dev/null
+++ b/include/keys/ceph-type.h
@@ -0,0 +1,8 @@
+#ifndef _KEYS_CEPH_TYPE_H
+#define _KEYS_CEPH_TYPE_H
+
+#include <linux/key.h>
+
+extern struct key_type key_type_ceph;
+
+#endif
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index 7fff521..aa13392 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -67,12 +67,12 @@
bool negotiating; /* true if negotiating protocol */
const char *name; /* entity name */
u64 global_id; /* our unique id in system */
- const char *secret; /* our secret key */
+ const struct ceph_crypto_key *key; /* our secret key */
unsigned want_keys; /* which services we want */
};
extern struct ceph_auth_client *ceph_auth_init(const char *name,
- const char *secret);
+ const struct ceph_crypto_key *key);
extern void ceph_auth_destroy(struct ceph_auth_client *ac);
extern void ceph_auth_reset(struct ceph_auth_client *ac);
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index 0d2e0ff..6365f04 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -61,7 +61,7 @@
pointer type of args */
int num_mon;
char *name;
- char *secret;
+ struct ceph_crypto_key *key;
};
/*
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 59b72ca..943c9b5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -338,14 +338,6 @@
/* IRQ wakeup (PM) control: */
extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
-#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT
-/* Please do not use: Use the replacement functions instead */
-static inline int set_irq_wake(unsigned int irq, unsigned int on)
-{
- return irq_set_irq_wake(irq, on);
-}
-#endif
-
static inline int enable_irq_wake(unsigned int irq)
{
return irq_set_irq_wake(irq, 1);
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 2a375a7..09a3080 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -64,13 +64,6 @@
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
* IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context
* IRQ_NESTED_TRHEAD - Interrupt nests into another thread
- *
- * Deprecated bits. They are kept updated as long as
- * CONFIG_GENERIC_HARDIRQS_NO_COMPAT is not set. Will go away soon. These bits
- * are internal state of the core code and if you really need to acces
- * them then talk to the genirq maintainer instead of hacking
- * something weird.
- *
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 03e8e8d..c2478a3 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -208,6 +208,7 @@
unsigned long long *crash_size, unsigned long long *crash_base);
int crash_shrink_memory(unsigned long new_size);
size_t crash_get_memory_size(void);
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
#else /* !CONFIG_KEXEC */
struct pt_regs;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 11fd381..4e2c915 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -518,7 +518,7 @@
#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303
#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304
#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603
-#define PCI_DEVICE_ID_AMD_15H_NB_LINK 0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604
#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 311b4dc..04d75a8 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1086,7 +1086,7 @@
{
perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
- COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next));
+ __perf_event_task_sched_out(task, next);
}
extern void perf_event_mmap(struct vm_area_struct *vma);
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index af56148..ff422d2 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -339,6 +339,12 @@
((typeof(*p) __force __kernel *)(p)); \
})
+#define __rcu_access_index(p, space) \
+ ({ \
+ typeof(p) _________p1 = ACCESS_ONCE(p); \
+ rcu_dereference_sparse(p, space); \
+ (_________p1); \
+ })
#define __rcu_dereference_index_check(p, c) \
({ \
typeof(p) _________p1 = ACCESS_ONCE(p); \
@@ -429,6 +435,20 @@
#define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/
/**
+ * rcu_access_index() - fetch RCU index with no dereferencing
+ * @p: The index to read
+ *
+ * Return the value of the specified RCU-protected index, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful
+ * when the value of this index is accessed, but the index is not
+ * dereferenced, for example, when testing an RCU-protected index against
+ * -1. Although rcu_access_index() may also be used in cases where
+ * update-side locks prevent the value of the index from changing, you
+ * should instead use rcu_dereference_index_protected() for this use case.
+ */
+#define rcu_access_index(p) __rcu_access_index((p), __rcu)
+
+/**
* rcu_dereference_index_check() - rcu_dereference for indices with debug checking
* @p: The pointer to read, prior to dereferencing
* @c: The conditions under which the dereference will take place
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 979ed84..ddc2b3d 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -45,25 +45,25 @@
/* platform domain */
#define SND_SOC_DAPM_INPUT(wname) \
{ .id = snd_soc_dapm_input, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0}
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_OUTPUT(wname) \
{ .id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0}
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_MIC(wname, wevent) \
{ .id = snd_soc_dapm_mic, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0, .event = wevent, \
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
#define SND_SOC_DAPM_HP(wname, wevent) \
{ .id = snd_soc_dapm_hp, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0, .event = wevent, \
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_SPK(wname, wevent) \
{ .id = snd_soc_dapm_spk, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0, .event = wevent, \
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_LINE(wname, wevent) \
{ .id = snd_soc_dapm_line, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0, .event = wevent, \
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
/* path domain */
@@ -189,11 +189,11 @@
/* events that are pre and post DAPM */
#define SND_SOC_DAPM_PRE(wname, wevent) \
{ .id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0, .event = wevent, \
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_POST(wname, wevent) \
{ .id = snd_soc_dapm_post, .name = wname, .kcontrols = NULL, \
- .num_kcontrols = 0, .event = wevent, \
+ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
/* stream domain */
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index a69c333..c574f9a 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -10,9 +10,6 @@
config GENERIC_HARDIRQS
def_bool y
-config GENERIC_HARDIRQS_NO_COMPAT
- bool
-
# Options selectable by the architecture code
# Make sparse irq Kconfig switch below available
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 616ec1c..1dafc86 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -514,7 +514,7 @@
} while ((desc->istate & IRQS_PENDING) &&
!irqd_irq_disabled(&desc->irq_data));
-out_unlock:
+out_eoi:
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ec19b92..4e240a3 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1099,7 +1099,8 @@
return size;
}
-static void free_reserved_phys_range(unsigned long begin, unsigned long end)
+void __weak crash_free_reserved_phys_range(unsigned long begin,
+ unsigned long end)
{
unsigned long addr;
@@ -1135,7 +1136,7 @@
start = roundup(start, PAGE_SIZE);
end = roundup(start + new_size, PAGE_SIZE);
- free_reserved_phys_range(end, crashk_res.end);
+ crash_free_reserved_phys_range(end, crashk_res.end);
if ((start == end) && (crashk_res.parent != NULL))
release_resource(&crashk_res);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index c75925c..27960f1 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -145,8 +145,8 @@
*/
int sysctl_perf_event_paranoid __read_mostly = 1;
-/* Minimum for 128 pages + 1 for the user control page */
-int sysctl_perf_event_mlock __read_mostly = 516; /* 'free' kb per user */
+/* Minimum for 512 kiB + 1 user control page */
+int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */
/*
* max perf event sample rate
@@ -6531,6 +6531,11 @@
goto err_alloc;
}
+ if (task) {
+ put_task_struct(task);
+ task = NULL;
+ }
+
/*
* Look up the group leader (we will attach this event to it):
*/
diff --git a/kernel/sched.c b/kernel/sched.c
index f592ce6..a884551 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5011,6 +5011,17 @@
return -EINVAL;
}
+ /*
+ * If not changing anything there's no need to proceed further:
+ */
+ if (unlikely(policy == p->policy && (!rt_policy(policy) ||
+ param->sched_priority == p->rt_priority))) {
+
+ __task_rq_unlock(rq);
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ return 0;
+ }
+
#ifdef CONFIG_RT_GROUP_SCHED
if (user) {
/*
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 3f7ec9e..c7ec5c8 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -22,6 +22,7 @@
#include <linux/latencytop.h>
#include <linux/sched.h>
+#include <linux/cpumask.h>
/*
* Targeted preemption latency for CPU-bound tasks:
@@ -3850,8 +3851,8 @@
interval = msecs_to_jiffies(interval);
if (unlikely(!interval))
interval = 1;
- if (interval > HZ*NR_CPUS/10)
- interval = HZ*NR_CPUS/10;
+ if (interval > HZ*num_online_cpus()/10)
+ interval = HZ*num_online_cpus()/10;
need_serialize = sd->flags & SD_SERIALIZE;
diff --git a/kernel/signal.c b/kernel/signal.c
index 1186cf7..dc17929 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -226,7 +226,7 @@
/*
* allocate a new signal queue record
* - this may be called without locks if and only if t == current, otherwise an
- * appopriate lock must be held to stop the target task from exiting
+ * appropriate lock must be held to stop the target task from exiting
*/
static struct sigqueue *
__sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimit)
@@ -375,15 +375,15 @@
return !tracehook_consider_fatal_signal(tsk, sig);
}
-
-/* Notify the system that a driver wants to block all signals for this
+/*
+ * Notify the system that a driver wants to block all signals for this
* process, and wants to be notified if any signals at all were to be
* sent/acted upon. If the notifier routine returns non-zero, then the
* signal will be acted upon after all. If the notifier routine returns 0,
* then then signal will be blocked. Only one block per process is
* allowed. priv is a pointer to private data that the notifier routine
- * can use to determine if the signal should be blocked or not. */
-
+ * can use to determine if the signal should be blocked or not.
+ */
void
block_all_signals(int (*notifier)(void *priv), void *priv, sigset_t *mask)
{
@@ -434,9 +434,10 @@
copy_siginfo(info, &first->info);
__sigqueue_free(first);
} else {
- /* Ok, it wasn't in the queue. This must be
- a fast-pathed signal or we must have been
- out of queue space. So zero out the info.
+ /*
+ * Ok, it wasn't in the queue. This must be
+ * a fast-pathed signal or we must have been
+ * out of queue space. So zero out the info.
*/
info->si_signo = sig;
info->si_errno = 0;
@@ -468,7 +469,7 @@
}
/*
- * Dequeue a signal and return the element to the caller, which is
+ * Dequeue a signal and return the element to the caller, which is
* expected to free it.
*
* All callers have to hold the siglock.
@@ -490,7 +491,7 @@
* itimers are process shared and we restart periodic
* itimers in the signal delivery path to prevent DoS
* attacks in the high resolution timer case. This is
- * compliant with the old way of self restarting
+ * compliant with the old way of self-restarting
* itimers, as the SIGALRM is a legacy signal and only
* queued once. Changing the restart behaviour to
* restart the timer in the signal dequeue path is
@@ -923,14 +924,15 @@
if (info == SEND_SIG_FORCED)
goto out_set;
- /* Real-time signals must be queued if sent by sigqueue, or
- some other real-time mechanism. It is implementation
- defined whether kill() does so. We attempt to do so, on
- the principle of least surprise, but since kill is not
- allowed to fail with EAGAIN when low on memory we just
- make sure at least one signal gets delivered and don't
- pass on the info struct. */
-
+ /*
+ * Real-time signals must be queued if sent by sigqueue, or
+ * some other real-time mechanism. It is implementation
+ * defined whether kill() does so. We attempt to do so, on
+ * the principle of least surprise, but since kill is not
+ * allowed to fail with EAGAIN when low on memory we just
+ * make sure at least one signal gets delivered and don't
+ * pass on the info struct.
+ */
if (sig < SIGRTMIN)
override_rlimit = (is_si_special(info) || info->si_code >= 0);
else
@@ -1201,8 +1203,7 @@
return error;
}
-int
-kill_proc_info(int sig, struct siginfo *info, pid_t pid)
+int kill_proc_info(int sig, struct siginfo *info, pid_t pid)
{
int error;
rcu_read_lock();
@@ -1299,8 +1300,7 @@
* These are for backward compatibility with the rest of the kernel source.
*/
-int
-send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
+int send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
{
/*
* Make sure legacy kernel users don't send in bad values
@@ -1368,7 +1368,7 @@
* These functions support sending signals using preallocated sigqueue
* structures. This is needed "because realtime applications cannot
* afford to lose notifications of asynchronous events, like timer
- * expirations or I/O completions". In the case of Posix Timers
+ * expirations or I/O completions". In the case of POSIX Timers
* we allocate the sigqueue structure from the timer_create. If this
* allocation fails we are able to report the failure to the application
* with an EAGAIN error.
@@ -1553,7 +1553,7 @@
info.si_signo = SIGCHLD;
info.si_errno = 0;
/*
- * see comment in do_notify_parent() abot the following 3 lines
+ * see comment in do_notify_parent() about the following 4 lines
*/
rcu_read_lock();
info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
@@ -1611,7 +1611,7 @@
}
/*
- * Return nonzero if there is a SIGKILL that should be waking us up.
+ * Return non-zero if there is a SIGKILL that should be waking us up.
* Called with the siglock held.
*/
static int sigkill_pending(struct task_struct *tsk)
@@ -1735,7 +1735,7 @@
/*
* This performs the stopping for SIGSTOP and other stop signals.
* We have to stop all threads in the thread group.
- * Returns nonzero if we've actually stopped and released the siglock.
+ * Returns non-zero if we've actually stopped and released the siglock.
* Returns zero if we didn't stop and still hold the siglock.
*/
static int do_signal_stop(int signr)
@@ -1823,10 +1823,12 @@
current->exit_code = 0;
- /* Update the siginfo structure if the signal has
- changed. If the debugger wanted something
- specific in the siginfo structure then it should
- have updated *info via PTRACE_SETSIGINFO. */
+ /*
+ * Update the siginfo structure if the signal has
+ * changed. If the debugger wanted something
+ * specific in the siginfo structure then it should
+ * have updated *info via PTRACE_SETSIGINFO.
+ */
if (signr != info->si_signo) {
info->si_signo = signr;
info->si_errno = 0;
@@ -2034,7 +2036,8 @@
if (!signal_pending(tsk))
goto out;
- /* It could be that __group_complete_signal() choose us to
+ /*
+ * It could be that __group_complete_signal() choose us to
* notify about group-wide signal. Another thread should be
* woken now to take the signal since we will not.
*/
@@ -2072,6 +2075,9 @@
* System call entry points.
*/
+/**
+ * sys_restart_syscall - restart a system call
+ */
SYSCALL_DEFINE0(restart_syscall)
{
struct restart_block *restart = ¤t_thread_info()->restart_block;
@@ -2125,6 +2131,13 @@
return error;
}
+/**
+ * sys_rt_sigprocmask - change the list of currently blocked signals
+ * @how: whether to add, remove, or set signals
+ * @set: stores pending signals
+ * @oset: previous value of signal mask if non-null
+ * @sigsetsize: size of sigset_t type
+ */
SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
sigset_t __user *, oset, size_t, sigsetsize)
{
@@ -2183,8 +2196,14 @@
out:
return error;
-}
+}
+/**
+ * sys_rt_sigpending - examine a pending signal that has been raised
+ * while blocked
+ * @set: stores pending signals
+ * @sigsetsize: size of sigset_t type or larger
+ */
SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
{
return do_sigpending(set, sigsetsize);
@@ -2233,9 +2252,9 @@
err |= __put_user(from->si_trapno, &to->si_trapno);
#endif
#ifdef BUS_MCEERR_AO
- /*
+ /*
* Other callers might not initialize the si_lsb field,
- * so check explicitely for the right codes here.
+ * so check explicitly for the right codes here.
*/
if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
@@ -2264,6 +2283,14 @@
#endif
+/**
+ * sys_rt_sigtimedwait - synchronously wait for queued signals specified
+ * in @uthese
+ * @uthese: queued signals to wait for
+ * @uinfo: if non-null, the signal's siginfo is returned here
+ * @uts: upper bound on process time suspension
+ * @sigsetsize: size of sigset_t type
+ */
SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
siginfo_t __user *, uinfo, const struct timespec __user *, uts,
size_t, sigsetsize)
@@ -2280,7 +2307,7 @@
if (copy_from_user(&these, uthese, sizeof(these)))
return -EFAULT;
-
+
/*
* Invert the set of allowed signals to get those we
* want to block.
@@ -2305,9 +2332,11 @@
+ (ts.tv_sec || ts.tv_nsec));
if (timeout) {
- /* None ready -- temporarily unblock those we're
+ /*
+ * None ready -- temporarily unblock those we're
* interested while we are sleeping in so that we'll
- * be awakened when they arrive. */
+ * be awakened when they arrive.
+ */
current->real_blocked = current->blocked;
sigandsets(¤t->blocked, ¤t->blocked, &these);
recalc_sigpending();
@@ -2339,6 +2368,11 @@
return ret;
}
+/**
+ * sys_kill - send a signal to a process
+ * @pid: the PID of the process
+ * @sig: signal to be sent
+ */
SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
{
struct siginfo info;
@@ -2414,7 +2448,11 @@
return do_tkill(tgid, pid, sig);
}
-/*
+/**
+ * sys_tkill - send signal to one specific task
+ * @pid: the PID of the task
+ * @sig: signal to be sent
+ *
* Send a signal to only one task, even if it's a CLONE_THREAD task.
*/
SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
@@ -2426,6 +2464,12 @@
return do_tkill(0, pid, sig);
}
+/**
+ * sys_rt_sigqueueinfo - send signal information to a signal
+ * @pid: the PID of the thread
+ * @sig: signal to be sent
+ * @uinfo: signal info to be sent
+ */
SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
siginfo_t __user *, uinfo)
{
@@ -2553,12 +2597,11 @@
error = -EINVAL;
/*
- *
- * Note - this code used to test ss_flags incorrectly
+ * Note - this code used to test ss_flags incorrectly:
* old code may have been written using ss_flags==0
* to mean ss_flags==SS_ONSTACK (as this was the only
* way that worked) - this fix preserves that older
- * mechanism
+ * mechanism.
*/
if (ss_flags != SS_DISABLE && ss_flags != SS_ONSTACK && ss_flags != 0)
goto out;
@@ -2592,6 +2635,10 @@
#ifdef __ARCH_WANT_SYS_SIGPENDING
+/**
+ * sys_sigpending - examine pending signals
+ * @set: where mask of pending signal is returned
+ */
SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
{
return do_sigpending(set, sizeof(*set));
@@ -2600,8 +2647,15 @@
#endif
#ifdef __ARCH_WANT_SYS_SIGPROCMASK
-/* Some platforms have their own version with special arguments others
- support only sys_rt_sigprocmask. */
+/**
+ * sys_sigprocmask - examine and change blocked signals
+ * @how: whether to add, remove, or set signals
+ * @set: signals to add or remove (if non-null)
+ * @oset: previous value of signal mask if non-null
+ *
+ * Some platforms have their own version with special arguments;
+ * others support only sys_rt_sigprocmask.
+ */
SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
old_sigset_t __user *, oset)
@@ -2654,6 +2708,13 @@
#endif /* __ARCH_WANT_SYS_SIGPROCMASK */
#ifdef __ARCH_WANT_SYS_RT_SIGACTION
+/**
+ * sys_rt_sigaction - alter an action taken by a process
+ * @sig: signal to be sent
+ * @act: the thread group ID of the thread
+ * @oact: the PID of the thread
+ * @sigsetsize: size of sigset_t type
+ */
SYSCALL_DEFINE4(rt_sigaction, int, sig,
const struct sigaction __user *, act,
struct sigaction __user *, oact,
@@ -2740,6 +2801,12 @@
#endif
#ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
+/**
+ * sys_rt_sigsuspend - replace the signal mask for a value with the
+ * @unewset value until a signal is received
+ * @unewset: new signal mask value
+ * @sigsetsize: size of sigset_t type
+ */
SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
{
sigset_t newset;
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5f1bb8e..f6117a4 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -652,6 +652,8 @@
struct timespec delta;
delta.tv_sec = txc->time.tv_sec;
delta.tv_nsec = txc->time.tv_usec;
+ if (!capable(CAP_SYS_TIME))
+ return -EPERM;
if (!(txc->modes & ADJ_NANO))
delta.tv_nsec *= 1000;
result = timekeeping_inject_offset(&delta);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index df9234c..c768bcd 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -434,11 +434,9 @@
config DEBUG_KMEMLEAK_TEST
tristate "Simple test for the kernel memory leak detector"
- depends on DEBUG_KMEMLEAK
+ depends on DEBUG_KMEMLEAK && m
help
- Say Y or M here to build a test for the kernel memory leak
- detector. This option enables a module that explicitly leaks
- memory.
+ This option enables a module that explicitly leaks memory.
If unsure, say N.
diff --git a/net/ceph/Kconfig b/net/ceph/Kconfig
index ad42404..be683f2 100644
--- a/net/ceph/Kconfig
+++ b/net/ceph/Kconfig
@@ -4,6 +4,7 @@
select LIBCRC32C
select CRYPTO_AES
select CRYPTO
+ select KEYS
default n
help
Choose Y or M here to include cephlib, which provides the
diff --git a/net/ceph/auth.c b/net/ceph/auth.c
index 549c1f4..b4bf4ac 100644
--- a/net/ceph/auth.c
+++ b/net/ceph/auth.c
@@ -35,12 +35,12 @@
/*
* setup, teardown.
*/
-struct ceph_auth_client *ceph_auth_init(const char *name, const char *secret)
+struct ceph_auth_client *ceph_auth_init(const char *name, const struct ceph_crypto_key *key)
{
struct ceph_auth_client *ac;
int ret;
- dout("auth_init name '%s' secret '%s'\n", name, secret);
+ dout("auth_init name '%s'\n", name);
ret = -ENOMEM;
ac = kzalloc(sizeof(*ac), GFP_NOFS);
@@ -52,8 +52,8 @@
ac->name = name;
else
ac->name = CEPH_AUTH_NAME_DEFAULT;
- dout("auth_init name %s secret %s\n", ac->name, secret);
- ac->secret = secret;
+ dout("auth_init name %s\n", ac->name);
+ ac->key = key;
return ac;
out:
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 7fd5dfc..1587dc6 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -662,14 +662,16 @@
goto out;
ret = -EINVAL;
- if (!ac->secret) {
+ if (!ac->key) {
pr_err("no secret set (for auth_x protocol)\n");
goto out_nomem;
}
- ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret);
- if (ret)
+ ret = ceph_crypto_key_clone(&xi->secret, ac->key);
+ if (ret < 0) {
+ pr_err("cannot clone key: %d\n", ret);
goto out_nomem;
+ }
xi->starting = true;
xi->ticket_handlers = RB_ROOT;
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 95f96ab..132963a 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -5,6 +5,8 @@
#include <linux/fs.h>
#include <linux/inet.h>
#include <linux/in6.h>
+#include <linux/key.h>
+#include <keys/ceph-type.h>
#include <linux/module.h>
#include <linux/mount.h>
#include <linux/parser.h>
@@ -20,6 +22,7 @@
#include <linux/ceph/decode.h>
#include <linux/ceph/mon_client.h>
#include <linux/ceph/auth.h>
+#include "crypto.h"
@@ -117,9 +120,29 @@
if (ret)
return ret;
- ret = strcmp_null(opt1->secret, opt2->secret);
- if (ret)
- return ret;
+ if (opt1->key && !opt2->key)
+ return -1;
+ if (!opt1->key && opt2->key)
+ return 1;
+ if (opt1->key && opt2->key) {
+ if (opt1->key->type != opt2->key->type)
+ return -1;
+ if (opt1->key->created.tv_sec != opt2->key->created.tv_sec)
+ return -1;
+ if (opt1->key->created.tv_nsec != opt2->key->created.tv_nsec)
+ return -1;
+ if (opt1->key->len != opt2->key->len)
+ return -1;
+ if (opt1->key->key && !opt2->key->key)
+ return -1;
+ if (!opt1->key->key && opt2->key->key)
+ return 1;
+ if (opt1->key->key && opt2->key->key) {
+ ret = memcmp(opt1->key->key, opt2->key->key, opt1->key->len);
+ if (ret)
+ return ret;
+ }
+ }
/* any matching mon ip implies a match */
for (i = 0; i < opt1->num_mon; i++) {
@@ -176,6 +199,7 @@
Opt_fsid,
Opt_name,
Opt_secret,
+ Opt_key,
Opt_ip,
Opt_last_string,
/* string args above */
@@ -192,6 +216,7 @@
{Opt_fsid, "fsid=%s"},
{Opt_name, "name=%s"},
{Opt_secret, "secret=%s"},
+ {Opt_key, "key=%s"},
{Opt_ip, "ip=%s"},
/* string args above */
{Opt_noshare, "noshare"},
@@ -203,11 +228,56 @@
{
dout("destroy_options %p\n", opt);
kfree(opt->name);
- kfree(opt->secret);
+ if (opt->key) {
+ ceph_crypto_key_destroy(opt->key);
+ kfree(opt->key);
+ }
kfree(opt);
}
EXPORT_SYMBOL(ceph_destroy_options);
+/* get secret from key store */
+static int get_secret(struct ceph_crypto_key *dst, const char *name) {
+ struct key *ukey;
+ int key_err;
+ int err = 0;
+ struct ceph_crypto_key *ckey;
+
+ ukey = request_key(&key_type_ceph, name, NULL);
+ if (!ukey || IS_ERR(ukey)) {
+ /* request_key errors don't map nicely to mount(2)
+ errors; don't even try, but still printk */
+ key_err = PTR_ERR(ukey);
+ switch (key_err) {
+ case -ENOKEY:
+ pr_warning("ceph: Mount failed due to key not found: %s\n", name);
+ break;
+ case -EKEYEXPIRED:
+ pr_warning("ceph: Mount failed due to expired key: %s\n", name);
+ break;
+ case -EKEYREVOKED:
+ pr_warning("ceph: Mount failed due to revoked key: %s\n", name);
+ break;
+ default:
+ pr_warning("ceph: Mount failed due to unknown key error"
+ " %d: %s\n", key_err, name);
+ }
+ err = -EPERM;
+ goto out;
+ }
+
+ ckey = ukey->payload.data;
+ err = ceph_crypto_key_clone(dst, ckey);
+ if (err)
+ goto out_key;
+ /* pass through, err is 0 */
+
+out_key:
+ key_put(ukey);
+out:
+ return err;
+}
+
int ceph_parse_options(struct ceph_options **popt, char *options,
const char *dev_name, const char *dev_name_end,
int (*parse_extra_token)(char *c, void *private),
@@ -295,9 +365,24 @@
GFP_KERNEL);
break;
case Opt_secret:
- opt->secret = kstrndup(argstr[0].from,
- argstr[0].to-argstr[0].from,
- GFP_KERNEL);
+ opt->key = kzalloc(sizeof(*opt->key), GFP_KERNEL);
+ if (!opt->key) {
+ err = -ENOMEM;
+ goto out;
+ }
+ err = ceph_crypto_key_unarmor(opt->key, argstr[0].from);
+ if (err < 0)
+ goto out;
+ break;
+ case Opt_key:
+ opt->key = kzalloc(sizeof(*opt->key), GFP_KERNEL);
+ if (!opt->key) {
+ err = -ENOMEM;
+ goto out;
+ }
+ err = get_secret(opt->key, argstr[0].from);
+ if (err < 0)
+ goto out;
break;
/* misc */
@@ -394,8 +479,8 @@
ceph_osdc_stop(&client->osdc);
/*
- * make sure mds and osd connections close out before destroying
- * the auth module, which is needed to free those connections'
+ * make sure osd connections close out before destroying the
+ * auth module, which is needed to free those connections'
* ceph_authorizers.
*/
ceph_msgr_flush();
@@ -496,10 +581,14 @@
if (ret < 0)
goto out;
- ret = ceph_msgr_init();
+ ret = ceph_crypto_init();
if (ret < 0)
goto out_debugfs;
+ ret = ceph_msgr_init();
+ if (ret < 0)
+ goto out_crypto;
+
pr_info("loaded (mon/osd proto %d/%d, osdmap %d/%d %d/%d)\n",
CEPH_MONC_PROTOCOL, CEPH_OSDC_PROTOCOL,
CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT,
@@ -507,6 +596,8 @@
return 0;
+out_crypto:
+ ceph_crypto_shutdown();
out_debugfs:
ceph_debugfs_cleanup();
out:
@@ -517,6 +608,7 @@
{
dout("exit_ceph_lib\n");
ceph_msgr_exit();
+ ceph_crypto_shutdown();
ceph_debugfs_cleanup();
}
diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c
index 7b505b0..5a8009c 100644
--- a/net/ceph/crypto.c
+++ b/net/ceph/crypto.c
@@ -5,10 +5,23 @@
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <crypto/hash.h>
+#include <linux/key-type.h>
+#include <keys/ceph-type.h>
#include <linux/ceph/decode.h>
#include "crypto.h"
+int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
+ const struct ceph_crypto_key *src)
+{
+ memcpy(dst, src, sizeof(struct ceph_crypto_key));
+ dst->key = kmalloc(src->len, GFP_NOFS);
+ if (!dst->key)
+ return -ENOMEM;
+ memcpy(dst->key, src->key, src->len);
+ return 0;
+}
+
int ceph_crypto_key_encode(struct ceph_crypto_key *key, void **p, void *end)
{
if (*p + sizeof(u16) + sizeof(key->created) +
@@ -410,3 +423,63 @@
return -EINVAL;
}
}
+
+int ceph_key_instantiate(struct key *key, const void *data, size_t datalen)
+{
+ struct ceph_crypto_key *ckey;
+ int ret;
+ void *p;
+
+ ret = -EINVAL;
+ if (datalen <= 0 || datalen > 32767 || !data)
+ goto err;
+
+ ret = key_payload_reserve(key, datalen);
+ if (ret < 0)
+ goto err;
+
+ ret = -ENOMEM;
+ ckey = kmalloc(sizeof(*ckey), GFP_KERNEL);
+ if (!ckey)
+ goto err;
+
+ /* TODO ceph_crypto_key_decode should really take const input */
+ p = (void*)data;
+ ret = ceph_crypto_key_decode(ckey, &p, (char*)data+datalen);
+ if (ret < 0)
+ goto err_ckey;
+
+ key->payload.data = ckey;
+ return 0;
+
+err_ckey:
+ kfree(ckey);
+err:
+ return ret;
+}
+
+int ceph_key_match(const struct key *key, const void *description)
+{
+ return strcmp(key->description, description) == 0;
+}
+
+void ceph_key_destroy(struct key *key) {
+ struct ceph_crypto_key *ckey = key->payload.data;
+
+ ceph_crypto_key_destroy(ckey);
+}
+
+struct key_type key_type_ceph = {
+ .name = "ceph",
+ .instantiate = ceph_key_instantiate,
+ .match = ceph_key_match,
+ .destroy = ceph_key_destroy,
+};
+
+int ceph_crypto_init(void) {
+ return register_key_type(&key_type_ceph);
+}
+
+void ceph_crypto_shutdown(void) {
+ unregister_key_type(&key_type_ceph);
+}
diff --git a/net/ceph/crypto.h b/net/ceph/crypto.h
index f9eccac..1919d15 100644
--- a/net/ceph/crypto.h
+++ b/net/ceph/crypto.h
@@ -19,6 +19,8 @@
kfree(key->key);
}
+extern int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
+ const struct ceph_crypto_key *src);
extern int ceph_crypto_key_encode(struct ceph_crypto_key *key,
void **p, void *end);
extern int ceph_crypto_key_decode(struct ceph_crypto_key *key,
@@ -40,6 +42,8 @@
void *dst, size_t *dst_len,
const void *src1, size_t src1_len,
const void *src2, size_t src2_len);
+extern int ceph_crypto_init(void);
+extern void ceph_crypto_shutdown(void);
/* armor.c */
extern int ceph_armor(char *dst, const char *src, const char *end);
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 8a07939..cbe31fa 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -759,7 +759,7 @@
/* authentication */
monc->auth = ceph_auth_init(cl->options->name,
- cl->options->secret);
+ cl->options->key);
if (IS_ERR(monc->auth))
return PTR_ERR(monc->auth);
monc->auth->want_keys =
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 02212ed..3b91d65 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -837,8 +837,7 @@
dout("moving osd to %p lru\n", req->r_osd);
__move_osd_to_lru(osdc, req->r_osd);
}
- if (list_empty(&req->r_osd_item) &&
- list_empty(&req->r_linger_item))
+ if (list_empty(&req->r_linger_item))
req->r_osd = NULL;
}
@@ -883,7 +882,8 @@
dout("moving osd to %p lru\n", req->r_osd);
__move_osd_to_lru(osdc, req->r_osd);
}
- req->r_osd = NULL;
+ if (list_empty(&req->r_osd_item))
+ req->r_osd = NULL;
}
}
@@ -1602,11 +1602,11 @@
cookie, ver, event);
if (event) {
event_work = kmalloc(sizeof(*event_work), GFP_NOIO);
- INIT_WORK(&event_work->work, do_event_work);
if (!event_work) {
dout("ERROR: could not allocate event_work\n");
goto done_err;
}
+ INIT_WORK(&event_work->work, do_event_work);
event_work->event = event;
event_work->ver = ver;
event_work->notify_id = notify_id;
@@ -1672,7 +1672,7 @@
if (req->r_sent == 0) {
rc = __map_request(osdc, req);
if (rc < 0)
- return rc;
+ goto out_unlock;
if (req->r_osd == NULL) {
dout("send_request %p no up osds in pg\n", req);
ceph_monc_request_next_osdmap(&osdc->client->monc);
@@ -1689,6 +1689,8 @@
}
}
}
+
+out_unlock:
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
return rc;
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a82e3756..64449cb 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -375,6 +375,7 @@
}
if (runtime->no_period_wakeup) {
+ snd_pcm_sframes_t xrun_threshold;
/*
* Without regular period interrupts, we have to check
* the elapsed time to detect xruns.
@@ -383,7 +384,8 @@
if (jdelta < runtime->hw_ptr_buffer_jiffies / 2)
goto no_delta_check;
hdelta = jdelta - delta * HZ / runtime->rate;
- while (hdelta > runtime->hw_ptr_buffer_jiffies / 2 + 1) {
+ xrun_threshold = runtime->hw_ptr_buffer_jiffies / 2 + 1;
+ while (hdelta > xrun_threshold) {
delta += runtime->buffer_size;
hw_base += runtime->buffer_size;
if (hw_base >= runtime->boundary)
diff --git a/sound/firewire/speakers.c b/sound/firewire/speakers.c
index 0fce921..5466de8 100644
--- a/sound/firewire/speakers.c
+++ b/sound/firewire/speakers.c
@@ -778,10 +778,9 @@
{
struct fwspk *fwspk = dev_get_drvdata(dev);
- snd_card_disconnect(fwspk->card);
-
mutex_lock(&fwspk->mutex);
amdtp_out_stream_pcm_abort(&fwspk->stream);
+ snd_card_disconnect(fwspk->card);
fwspk_stop_stream(fwspk);
mutex_unlock(&fwspk->mutex);
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 537cfba..863eafe 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -229,6 +229,7 @@
#define ES_REG_1371_CODEC 0x14 /* W/R: Codec Read/Write register address */
#define ES_1371_CODEC_RDY (1<<31) /* codec ready */
#define ES_1371_CODEC_WIP (1<<30) /* codec register access in progress */
+#define EV_1938_CODEC_MAGIC (1<<26)
#define ES_1371_CODEC_PIRD (1<<23) /* codec read/write select register */
#define ES_1371_CODEC_WRITE(a,d) ((((a)&0x7f)<<16)|(((d)&0xffff)<<0))
#define ES_1371_CODEC_READS(a) ((((a)&0x7f)<<16)|ES_1371_CODEC_PIRD)
@@ -603,12 +604,18 @@
#ifdef CHIP1371
+static inline bool is_ev1938(struct ensoniq *ensoniq)
+{
+ return ensoniq->pci->device == 0x8938;
+}
+
static void snd_es1371_codec_write(struct snd_ac97 *ac97,
unsigned short reg, unsigned short val)
{
struct ensoniq *ensoniq = ac97->private_data;
- unsigned int t, x;
+ unsigned int t, x, flag;
+ flag = is_ev1938(ensoniq) ? EV_1938_CODEC_MAGIC : 0;
mutex_lock(&ensoniq->src_mutex);
for (t = 0; t < POLL_COUNT; t++) {
if (!(inl(ES_REG(ensoniq, 1371_CODEC)) & ES_1371_CODEC_WIP)) {
@@ -630,7 +637,8 @@
0x00010000)
break;
}
- outl(ES_1371_CODEC_WRITE(reg, val), ES_REG(ensoniq, 1371_CODEC));
+ outl(ES_1371_CODEC_WRITE(reg, val) | flag,
+ ES_REG(ensoniq, 1371_CODEC));
/* restore SRC reg */
snd_es1371_wait_src_ready(ensoniq);
outl(x, ES_REG(ensoniq, 1371_SMPRATE));
@@ -647,8 +655,9 @@
unsigned short reg)
{
struct ensoniq *ensoniq = ac97->private_data;
- unsigned int t, x, fail = 0;
+ unsigned int t, x, flag, fail = 0;
+ flag = is_ev1938(ensoniq) ? EV_1938_CODEC_MAGIC : 0;
__again:
mutex_lock(&ensoniq->src_mutex);
for (t = 0; t < POLL_COUNT; t++) {
@@ -671,7 +680,8 @@
0x00010000)
break;
}
- outl(ES_1371_CODEC_READS(reg), ES_REG(ensoniq, 1371_CODEC));
+ outl(ES_1371_CODEC_READS(reg) | flag,
+ ES_REG(ensoniq, 1371_CODEC));
/* restore SRC reg */
snd_es1371_wait_src_ready(ensoniq);
outl(x, ES_REG(ensoniq, 1371_SMPRATE));
@@ -683,6 +693,11 @@
/* now wait for the stinkin' data (RDY) */
for (t = 0; t < POLL_COUNT; t++) {
if ((x = inl(ES_REG(ensoniq, 1371_CODEC))) & ES_1371_CODEC_RDY) {
+ if (is_ev1938(ensoniq)) {
+ for (t = 0; t < 100; t++)
+ inl(ES_REG(ensoniq, CONTROL));
+ x = inl(ES_REG(ensoniq, 1371_CODEC));
+ }
mutex_unlock(&ensoniq->src_mutex);
return ES_1371_CODEC_READ(x);
}
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index d08cf31..69e3386 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3034,6 +3034,7 @@
SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
{}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0ef0035..12c6f45 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9863,7 +9863,6 @@
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG),
@@ -10700,6 +10699,7 @@
PINFIX_LENOVO_Y530,
PINFIX_PB_M5210,
PINFIX_ACER_ASPIRE_7736,
+ PINFIX_GIGABYTE_880GM,
};
static const struct alc_fixup alc882_fixups[] = {
@@ -10731,6 +10731,13 @@
.type = ALC_FIXUP_SKU,
.v.sku = ALC_FIXUP_SKU_IGNORE,
},
+ [PINFIX_GIGABYTE_880GM] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x1114410 }, /* set as speaker */
+ { }
+ }
+ },
};
static struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -10738,6 +10745,7 @@
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", PINFIX_ACER_ASPIRE_7736),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", PINFIX_GIGABYTE_880GM),
{}
};
@@ -18774,8 +18782,6 @@
ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
- ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x152d, 0x2304, "Quanta WH1", ALC663_ASUS_H13),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
@@ -19449,6 +19455,7 @@
ALC662_FIXUP_IDEAPAD,
ALC272_FIXUP_MARIO,
ALC662_FIXUP_CZC_P10T,
+ ALC662_FIXUP_GIGABYTE,
};
static const struct alc_fixup alc662_fixups[] = {
@@ -19477,12 +19484,20 @@
{}
}
},
+ [ALC662_FIXUP_GIGABYTE] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x1114410 }, /* set as speaker */
+ { }
+ }
+ },
};
static struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", ALC662_FIXUP_GIGABYTE),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c
index 2a30eae..a54d2a5 100644
--- a/sound/soc/codecs/sn95031.c
+++ b/sound/soc/codecs/sn95031.c
@@ -26,7 +26,9 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <linux/slab.h>
+
#include <asm/intel_scu_ipc.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 00b6d87..eb1a0b4 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -324,6 +324,10 @@
dac33_write(codec, DAC33_OUT_AMP_CTRL,
dac33_read_reg_cache(codec, DAC33_OUT_AMP_CTRL));
+ dac33_write(codec, DAC33_LDAC_PWR_CTRL,
+ dac33_read_reg_cache(codec, DAC33_LDAC_PWR_CTRL));
+ dac33_write(codec, DAC33_RDAC_PWR_CTRL,
+ dac33_read_reg_cache(codec, DAC33_RDAC_PWR_CTRL));
}
static inline int dac33_read_id(struct snd_soc_codec *codec)
@@ -670,6 +674,7 @@
{
struct snd_soc_codec *codec = dac33->codec;
unsigned int delay;
+ unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
@@ -677,10 +682,10 @@
DAC33_THRREG(dac33->nsample));
/* Take the timestamps */
- spin_lock_irq(&dac33->lock);
+ spin_lock_irqsave(&dac33->lock, flags);
dac33->t_stamp2 = ktime_to_us(ktime_get());
dac33->t_stamp1 = dac33->t_stamp2;
- spin_unlock_irq(&dac33->lock);
+ spin_unlock_irqrestore(&dac33->lock, flags);
dac33_write16(codec, DAC33_PREFILL_MSB,
DAC33_THRREG(dac33->alarm_threshold));
@@ -692,11 +697,11 @@
break;
case DAC33_FIFO_MODE7:
/* Take the timestamp */
- spin_lock_irq(&dac33->lock);
+ spin_lock_irqsave(&dac33->lock, flags);
dac33->t_stamp1 = ktime_to_us(ktime_get());
/* Move back the timestamp with drain time */
dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
- spin_unlock_irq(&dac33->lock);
+ spin_unlock_irqrestore(&dac33->lock, flags);
dac33_write16(codec, DAC33_PREFILL_MSB,
DAC33_THRREG(DAC33_MODE7_MARGIN));
@@ -714,13 +719,14 @@
static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_codec *codec = dac33->codec;
+ unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
/* Take the timestamp */
- spin_lock_irq(&dac33->lock);
+ spin_lock_irqsave(&dac33->lock, flags);
dac33->t_stamp2 = ktime_to_us(ktime_get());
- spin_unlock_irq(&dac33->lock);
+ spin_unlock_irqrestore(&dac33->lock, flags);
dac33_write16(codec, DAC33_NSAMPLE_MSB,
DAC33_THRREG(dac33->nsample));
@@ -773,10 +779,11 @@
{
struct snd_soc_codec *codec = dev;
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+ unsigned long flags;
- spin_lock(&dac33->lock);
+ spin_lock_irqsave(&dac33->lock, flags);
dac33->t_stamp1 = ktime_to_us(ktime_get());
- spin_unlock(&dac33->lock);
+ spin_unlock_irqrestore(&dac33->lock, flags);
/* Do not schedule the workqueue in Mode7 */
if (dac33->fifo_mode != DAC33_FIFO_MODE7)
@@ -1173,15 +1180,16 @@
unsigned int time_delta, uthr;
int samples_out, samples_in, samples;
snd_pcm_sframes_t delay = 0;
+ unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_BYPASS:
break;
case DAC33_FIFO_MODE1:
- spin_lock(&dac33->lock);
+ spin_lock_irqsave(&dac33->lock, flags);
t0 = dac33->t_stamp1;
t1 = dac33->t_stamp2;
- spin_unlock(&dac33->lock);
+ spin_unlock_irqrestore(&dac33->lock, flags);
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
@@ -1246,10 +1254,10 @@
}
break;
case DAC33_FIFO_MODE7:
- spin_lock(&dac33->lock);
+ spin_lock_irqsave(&dac33->lock, flags);
t0 = dac33->t_stamp1;
uthr = dac33->uthr;
- spin_unlock(&dac33->lock);
+ spin_unlock_irqrestore(&dac33->lock, flags);
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 482fcdb..255901c 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -1629,8 +1629,10 @@
priv->naudint = naudint;
priv->workqueue = create_singlethread_workqueue("twl6040-codec");
- if (!priv->workqueue)
+ if (!priv->workqueue) {
+ ret = -ENOMEM;
goto work_err;
+ }
INIT_DELAYED_WORK(&priv->delayed_work, twl6040_accessory_work);
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 671ef8d..aab7765 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -110,12 +110,12 @@
slave_config.direction = DMA_TO_DEVICE;
slave_config.dst_addr = dma_params->dma_addr;
slave_config.dst_addr_width = buswidth;
- slave_config.dst_maxburst = dma_params->burstsize;
+ slave_config.dst_maxburst = dma_params->burstsize * buswidth;
} else {
slave_config.direction = DMA_FROM_DEVICE;
slave_config.src_addr = dma_params->dma_addr;
slave_config.src_addr_width = buswidth;
- slave_config.src_maxburst = dma_params->burstsize;
+ slave_config.src_maxburst = dma_params->burstsize * buswidth;
}
ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
@@ -303,6 +303,11 @@
static int __devinit imx_soc_platform_probe(struct platform_device *pdev)
{
+ struct imx_ssi *ssi = platform_get_drvdata(pdev);
+
+ ssi->dma_params_tx.burstsize = 6;
+ ssi->dma_params_rx.burstsize = 4;
+
return snd_soc_register_platform(&pdev->dev, &imx_soc_platform_mx2);
}
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index a4406a1..dc8a875 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -234,7 +234,4 @@
*/
#define IMX_SSI_DMABUF_SIZE (64 * 1024)
-#define DMA_RXFIFO_BURST 0x4
-#define DMA_TXFIFO_BURST 0x6
-
#endif /* _IMX_SSI_H */
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 784cff5..9027da4 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -310,7 +310,7 @@
.cpu_dai_name = "pxa2xx-i2s",
.codec_dai_name = "wm8731-hifi",
.platform_name = "pxa-pcm-audio",
- .codec_name = "wm8731-codec-0.001b",
+ .codec_name = "wm8731-codec.0-001b",
.init = corgi_wm8731_init,
.ops = &corgi_ops,
};
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index fcab80b..fc017c0 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -331,7 +331,7 @@
goto err;
if (gpios[i].wake) {
- ret = set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
+ ret = irq_set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
if (ret != 0)
printk(KERN_ERR
"Failed to mark GPIO %d as wake source: %d\n",
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 158c30e..207dee5 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -165,8 +165,12 @@
strip-libs = $(filter-out -l%,$(1))
$(OUTPUT)python/perf.so: $(PYRF_OBJS)
- $(QUIET_GEN)python util/setup.py --quiet build_ext --build-lib='$(OUTPUT)python' \
- --build-temp='$(OUTPUT)python/temp'
+ $(QUIET_GEN)( \
+ export CFLAGS="$(BASIC_CFLAGS)"; \
+ python util/setup.py --quiet build_ext --build-lib='$(OUTPUT)python' \
+ --build-temp='$(OUTPUT)python/temp' \
+ )
+
#
# No Perl scripts right now:
#
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 6febcc1..17d1dcb 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -41,7 +41,7 @@
static u64 default_interval = 0;
static unsigned int page_size;
-static unsigned int mmap_pages = 128;
+static unsigned int mmap_pages = UINT_MAX;
static unsigned int user_freq = UINT_MAX;
static int freq = 1000;
static int output;
@@ -275,11 +275,10 @@
!no_inherit) < 0) {
int err = errno;
- if (err == EPERM || err == EACCES)
- die("Permission error - are you root?\n"
- "\t Consider tweaking"
- " /proc/sys/kernel/perf_event_paranoid.\n");
- else if (err == ENODEV && cpu_list) {
+ if (err == EPERM || err == EACCES) {
+ ui__warning_paranoid();
+ exit(EXIT_FAILURE);
+ } else if (err == ENODEV && cpu_list) {
die("No such device - did you specify"
" an out-of-range profile CPU?\n");
} else if (err == EINVAL && sample_id_all_avail) {
@@ -302,11 +301,19 @@
&& attr->config == PERF_COUNT_HW_CPU_CYCLES) {
if (verbose)
- warning(" ... trying to fall back to cpu-clock-ticks\n");
+ ui__warning("The cycles event is not supported, "
+ "trying to fall back to cpu-clock-ticks\n");
attr->type = PERF_TYPE_SOFTWARE;
attr->config = PERF_COUNT_SW_CPU_CLOCK;
goto try_again;
}
+
+ if (err == ENOENT) {
+ ui__warning("The %s event is not supported.\n",
+ event_name(pos));
+ exit(EXIT_FAILURE);
+ }
+
printf("\n");
error("sys_perf_event_open() syscall returned with %d (%s). /bin/dmesg may provide additional information.\n",
err, strerror(err));
@@ -506,6 +513,10 @@
if (have_tracepoints(&evsel_list->entries))
perf_header__set_feat(&session->header, HEADER_TRACE_INFO);
+ /* 512 kiB: default amount of unprivileged mlocked memory */
+ if (mmap_pages == UINT_MAX)
+ mmap_pages = (512 * 1024) / page_size;
+
if (forks) {
child_pid = fork();
if (child_pid < 0) {
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 676b4fb..fc1273e 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -850,10 +850,10 @@
top.evlist->threads, group, inherit) < 0) {
int err = errno;
- if (err == EPERM || err == EACCES)
- die("Permission error - are you root?\n"
- "\t Consider tweaking"
- " /proc/sys/kernel/perf_event_paranoid.\n");
+ if (err == EPERM || err == EACCES) {
+ ui__warning_paranoid();
+ goto out_err;
+ }
/*
* If it's cycles then fall back to hrtimer
* based cpu-clock-tick sw counter, which
@@ -861,25 +861,41 @@
*/
if (attr->type == PERF_TYPE_HARDWARE &&
attr->config == PERF_COUNT_HW_CPU_CYCLES) {
-
if (verbose)
- warning(" ... trying to fall back to cpu-clock-ticks\n");
+ ui__warning("Cycles event not supported,\n"
+ "trying to fall back to cpu-clock-ticks\n");
attr->type = PERF_TYPE_SOFTWARE;
attr->config = PERF_COUNT_SW_CPU_CLOCK;
goto try_again;
}
- printf("\n");
- error("sys_perf_event_open() syscall returned with %d "
- "(%s). /bin/dmesg may provide additional information.\n",
- err, strerror(err));
- die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
- exit(-1);
+
+ if (err == ENOENT) {
+ ui__warning("The %s event is not supported.\n",
+ event_name(counter));
+ goto out_err;
+ }
+
+ ui__warning("The sys_perf_event_open() syscall "
+ "returned with %d (%s). /bin/dmesg "
+ "may provide additional information.\n"
+ "No CONFIG_PERF_EVENTS=y kernel support "
+ "configured?\n", err, strerror(err));
+ goto out_err;
}
}
- if (perf_evlist__mmap(evlist, mmap_pages, false) < 0)
- die("failed to mmap with %d (%s)\n", errno, strerror(errno));
+ if (perf_evlist__mmap(evlist, mmap_pages, false) < 0) {
+ ui__warning("Failed to mmap with %d (%s)\n",
+ errno, strerror(errno));
+ goto out_err;
+ }
+
+ return;
+
+out_err:
+ exit_browser(0);
+ exit(0);
}
static int __cmd_top(void)
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index d4536a9..155749d 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -57,6 +57,16 @@
}
#endif
+void ui__warning_paranoid(void)
+{
+ ui__warning("Permission error - are you root?\n"
+ "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
+ " -1 - Not paranoid at all\n"
+ " 0 - Disallow raw tracepoint access for unpriv\n"
+ " 1 - Disallow cpu events for unpriv\n"
+ " 2 - Disallow kernel profiling for unpriv\n");
+}
+
void trace_event(union perf_event *event)
{
unsigned char *raw_event = (void *)event;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 93516cf4..fd53db4 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -36,5 +36,6 @@
#endif
void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
+void ui__warning_paranoid(void);
#endif /* __PERF_DEBUG_H */
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 2b15c36..1023f67 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -710,7 +710,7 @@
* in the whole kernel symbol list.
*/
if ((long long)al->addr < 0 &&
- cpumode == PERF_RECORD_MISC_KERNEL &&
+ cpumode == PERF_RECORD_MISC_USER &&
machine && mg != &machine->kmaps) {
mg = &machine->kmaps;
goto try_again;
diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py
index e24ffad..bbc982f 100644
--- a/tools/perf/util/setup.py
+++ b/tools/perf/util/setup.py
@@ -1,13 +1,18 @@
#!/usr/bin/python2
from distutils.core import setup, Extension
+from os import getenv
+
+cflags = ['-fno-strict-aliasing', '-Wno-write-strings']
+cflags += getenv('CFLAGS', '').split()
perf = Extension('perf',
sources = ['util/python.c', 'util/ctype.c', 'util/evlist.c',
'util/evsel.c', 'util/cpumap.c', 'util/thread_map.c',
'util/util.c', 'util/xyarray.c', 'util/cgroup.c'],
include_dirs = ['util/include'],
- extra_compile_args = ['-fno-strict-aliasing', '-Wno-write-strings'])
+ extra_compile_args = cflags,
+ )
setup(name='perf',
version='0.1',
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 17df793..f06c10f 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1196,6 +1196,8 @@
if (curr_dso == NULL)
goto out_elf_end;
curr_dso->kernel = self->kernel;
+ curr_dso->long_name = self->long_name;
+ curr_dso->long_name_len = self->long_name_len;
curr_map = map__new2(start, curr_dso,
map->type);
if (curr_map == NULL) {
@@ -1842,6 +1844,7 @@
if (fd < 0)
return -1;
+ dso__set_long_name(self, (char *)vmlinux);
dso__set_loaded(self, map->type);
err = dso__load_sym(self, map, symfs_vmlinux, fd, filter, 0, 0);
close(fd);
@@ -2403,6 +2406,8 @@
if (symbol_conf.initialized)
return 0;
+ symbol_conf.priv_size = ALIGN(symbol_conf.priv_size, sizeof(u64));
+
elf_version(EV_CURRENT);
if (symbol_conf.sort_by_name)
symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) -