V4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver
This is a new framework to support boards based on the CX23885/7 PCIe
bridge. The framework supports digital (no analog yet)
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
new file mode 100644
index 0000000..9344fb5
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -0,0 +1,198 @@
+/*
+ * Driver for the Conexant CX23885 PCIe bridge
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "cx23885.h"
+
+/* ------------------------------------------------------------------ */
+/* board config info */
+
+struct cx23885_board cx23885_boards[] = {
+ [CX23885_BOARD_UNKNOWN] = {
+ .name = "UNKNOWN/GENERIC",
+ .bridge = CX23885_BRIDGE_UNDEFINED,
+ .input = {{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 0,
+ },{
+ .type = CX23885_VMUX_COMPOSITE2,
+ .vmux = 1,
+ },{
+ .type = CX23885_VMUX_COMPOSITE3,
+ .vmux = 2,
+ },{
+ .type = CX23885_VMUX_COMPOSITE4,
+ .vmux = 3,
+ }},
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
+ .name = "Hauppauge WinTV-HVR1800lp",
+ .bridge = CX23885_BRIDGE_885,
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1800] = {
+ .name = "Hauppauge WinTV-HVR1800",
+ .bridge = CX23885_BRIDGE_887,
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
+};
+const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs */
+
+struct cx23885_subid cx23885_subids[] = {
+ {
+ .subvendor = 0x0070,
+ .subdevice = 0x3400,
+ .card = CX23885_BOARD_UNKNOWN,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7600,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7800,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7801,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },
+};
+const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
+
+void cx23885_card_list(struct cx23885_dev *dev)
+{
+ int i;
+
+ if (0 == dev->pci->subsystem_vendor &&
+ 0 == dev->pci->subsystem_device) {
+ printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
+ "%s: be autodetected. Please pass card=<n> insmod option to\n"
+ "%s: workaround that. Redirect complaints to the vendor of\n"
+ "%s: the TV card. Best regards,\n"
+ "%s: -- tux\n",
+ dev->name, dev->name, dev->name, dev->name, dev->name);
+ } else {
+ printk("%s: Your board isn't known (yet) to the driver. You can\n"
+ "%s: try to pick one of the existing card configs via\n"
+ "%s: card=<n> insmod option. Updating to the latest\n"
+ "%s: version might help as well.\n",
+ dev->name, dev->name, dev->name, dev->name);
+ }
+ printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+ dev->name);
+ for (i = 0; i < cx23885_bcount; i++)
+ printk("%s: card=%d -> %s\n",
+ dev->name, i, cx23885_boards[i].name);
+}
+
+static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
+{
+ struct tveeprom tv;
+
+ tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
+
+
+ /* Make sure we support the board model */
+ switch (tv.model)
+ {
+ case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
+ case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
+ case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+ break;
+ default:
+ printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
+ break;
+ }
+
+ printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+ dev->name, tv.model);
+}
+
+void cx23885_card_setup(struct cx23885_dev *dev)
+{
+ static u8 eeprom[256];
+
+ if (dev->i2c_bus[0].i2c_rc == 0) {
+ dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+ tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
+ }
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ if (dev->i2c_bus[0].i2c_rc == 0)
+ hauppauge_eeprom(dev, eeprom+0x80);
+ break;
+ }
+}
+
+/* ------------------------------------------------------------------ */
+
+EXPORT_SYMBOL(cx23885_boards);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */