[TG3]: Kill some less useful flags
Kill the TG3_FLAG_NO_{TX|RX}_PSEUDO_CSUM flags because they are not
very useful. This will free up some bits for new flags.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d6047bd..376d8e7 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5828,10 +5828,14 @@
GRC_MODE_NO_TX_PHDR_CSUM |
GRC_MODE_NO_RX_PHDR_CSUM);
tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
- if (tp->tg3_flags & TG3_FLAG_NO_TX_PSEUDO_CSUM)
- tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
- if (tp->tg3_flags & TG3_FLAG_NO_RX_PSEUDO_CSUM)
- tp->grc_mode |= GRC_MODE_NO_RX_PHDR_CSUM;
+
+ /* Pseudo-header checksum is done by hardware logic and not
+ * the offload processers, so make the chip do the pseudo-
+ * header checksums on receive. For transmit it is more
+ * convenient to do the pseudo-header checksum in software
+ * as Linux does that on transmit for us in all cases.
+ */
+ tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
tw32(GRC_MODE,
tp->grc_mode |
@@ -10303,15 +10307,6 @@
if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
- /* Pseudo-header checksum is done by hardware logic and not
- * the offload processers, so make the chip do the pseudo-
- * header checksums on receive. For transmit it is more
- * convenient to do the pseudo-header checksum in software
- * as Linux does that on transmit for us in all cases.
- */
- tp->tg3_flags |= TG3_FLAG_NO_TX_PSEUDO_CSUM;
- tp->tg3_flags &= ~TG3_FLAG_NO_RX_PSEUDO_CSUM;
-
/* Derive initial jumbo mode from MTU assigned in
* ether_setup() via the alloc_etherdev() call
*/