| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/sx150x.h> |
| #include <linux/i2c/isl9519.h> |
| #include <linux/gpio.h> |
| #include <linux/msm_ssbi.h> |
| #include <linux/regulator/gpio-regulator.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/mfd/pm8xxx/pm8xxx-adc.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slimbus/slimbus.h> |
| #include <linux/bootmem.h> |
| #include <linux/msm_kgsl.h> |
| #ifdef CONFIG_ANDROID_PMEM |
| #include <linux/android_pmem.h> |
| #endif |
| #include <linux/cyttsp.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_data/qcom_crypto_device.h> |
| #include <linux/platform_data/qcom_wcnss_device.h> |
| #include <linux/leds.h> |
| #include <linux/leds-pm8xxx.h> |
| #include <linux/i2c/atmel_mxt_ts.h> |
| #include <linux/msm_tsens.h> |
| #include <linux/ks8851.h> |
| #include <linux/i2c/isa1200.h> |
| #include <linux/memory.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/setup.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/mach/mmc.h> |
| |
| #include <mach/board.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/msm_spi.h> |
| #ifdef CONFIG_USB_MSM_OTG_72K |
| #include <mach/msm_hsusb.h> |
| #else |
| #include <linux/usb/msm_hsusb.h> |
| #endif |
| #include <linux/usb/android.h> |
| #include <mach/usbdiag.h> |
| #include <mach/socinfo.h> |
| #include <mach/rpm.h> |
| #include <mach/gpio.h> |
| #include <mach/gpiomux.h> |
| #include <mach/msm_bus_board.h> |
| #include <mach/msm_memtypes.h> |
| #include <mach/dma.h> |
| #include <mach/msm_dsps.h> |
| #include <mach/msm_xo.h> |
| #include <mach/restart.h> |
| |
| #ifdef CONFIG_WCD9310_CODEC |
| #include <linux/slimbus/slimbus.h> |
| #include <linux/mfd/wcd9310/core.h> |
| #include <linux/mfd/wcd9310/pdata.h> |
| #endif |
| |
| #include <linux/ion.h> |
| #include <mach/ion.h> |
| #include <mach/mdm2.h> |
| #include <mach/mdm-peripheral.h> |
| |
| #include <linux/fmem.h> |
| |
| #include "timer.h" |
| #include "devices.h" |
| #include "devices-msm8x60.h" |
| #include "spm.h" |
| #include "board-8960.h" |
| #include <mach/pm.h> |
| #include <mach/cpuidle.h> |
| #include "rpm_resources.h" |
| #include "mpm.h" |
| #include "acpuclock.h" |
| #include "rpm_log.h" |
| #include "smd_private.h" |
| #include "pm-boot.h" |
| #include "msm_watchdog.h" |
| |
| static struct platform_device msm_fm_platform_init = { |
| .name = "iris_fm", |
| .id = -1, |
| }; |
| |
| #define KS8851_RST_GPIO 89 |
| #define KS8851_IRQ_GPIO 90 |
| #define HAP_SHIFT_LVL_OE_GPIO 47 |
| |
| #if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE) |
| |
| struct sx150x_platform_data msm8960_sx150x_data[] = { |
| [SX150X_CAM] = { |
| .gpio_base = GPIO_CAM_EXPANDER_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0, |
| .io_pulldn_ena = 0xc0, |
| .io_open_drain_ena = 0x0, |
| .irq_summary = -1, |
| }, |
| [SX150X_LIQUID] = { |
| .gpio_base = GPIO_LIQUID_EXPANDER_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0c08, |
| .io_pulldn_ena = 0x4060, |
| .io_open_drain_ena = 0x000c, |
| .io_polarity = 0, |
| .irq_summary = -1, |
| }, |
| }; |
| |
| #endif |
| |
| #define MSM_PMEM_ADSP_SIZE 0x7800000 |
| #define MSM_PMEM_AUDIO_SIZE 0x2B4000 |
| #ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY |
| #define MSM_PMEM_SIZE 0x4000000 /* 64 Mbytes */ |
| #else |
| #define MSM_PMEM_SIZE 0x2800000 /* 40 Mbytes */ |
| #endif |
| #define MSM_LIQUID_PMEM_SIZE 0x4000000 /* 64 Mbytes */ |
| |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| #define MSM_PMEM_KERNEL_EBI1_SIZE 0xB0C000 |
| #define MSM_ION_SF_SIZE MSM_PMEM_SIZE |
| #define MSM_ION_MM_FW_SIZE 0x200000 /* (2MB) */ |
| #define MSM_ION_MM_SIZE MSM_PMEM_ADSP_SIZE |
| #define MSM_ION_QSECOM_SIZE 0x100000 /* (1MB) */ |
| #define MSM_ION_MFC_SIZE SZ_8K |
| #define MSM_ION_AUDIO_SIZE MSM_PMEM_AUDIO_SIZE |
| #define MSM_ION_HEAP_NUM 8 |
| #define MSM_LIQUID_ION_MM_SIZE (MSM_ION_MM_SIZE + 0x600000) |
| static unsigned int msm_ion_cp_mm_size = MSM_ION_MM_SIZE; |
| #else |
| #define MSM_PMEM_KERNEL_EBI1_SIZE 0x110C000 |
| #define MSM_ION_HEAP_NUM 1 |
| #endif |
| |
| #ifdef CONFIG_KERNEL_PMEM_EBI_REGION |
| static unsigned pmem_kernel_ebi1_size = MSM_PMEM_KERNEL_EBI1_SIZE; |
| static int __init pmem_kernel_ebi1_size_setup(char *p) |
| { |
| pmem_kernel_ebi1_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_kernel_ebi1_size", pmem_kernel_ebi1_size_setup); |
| #endif |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| static unsigned pmem_size = MSM_PMEM_SIZE; |
| static unsigned pmem_param_set; |
| static int __init pmem_size_setup(char *p) |
| { |
| pmem_size = memparse(p, NULL); |
| pmem_param_set = 1; |
| return 0; |
| } |
| early_param("pmem_size", pmem_size_setup); |
| |
| static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE; |
| |
| static int __init pmem_adsp_size_setup(char *p) |
| { |
| pmem_adsp_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_adsp_size", pmem_adsp_size_setup); |
| |
| static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE; |
| |
| static int __init pmem_audio_size_setup(char *p) |
| { |
| pmem_audio_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_audio_size", pmem_audio_size_setup); |
| #endif |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static struct android_pmem_platform_data android_pmem_pdata = { |
| .name = "pmem", |
| .allocator_type = PMEM_ALLOCATORTYPE_ALLORNOTHING, |
| .cached = 1, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device android_pmem_device = { |
| .name = "android_pmem", |
| .id = 0, |
| .dev = {.platform_data = &android_pmem_pdata}, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_adsp_pdata = { |
| .name = "pmem_adsp", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| static struct platform_device android_pmem_adsp_device = { |
| .name = "android_pmem", |
| .id = 2, |
| .dev = { .platform_data = &android_pmem_adsp_pdata }, |
| }; |
| #endif |
| |
| static struct android_pmem_platform_data android_pmem_audio_pdata = { |
| .name = "pmem_audio", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device android_pmem_audio_device = { |
| .name = "android_pmem", |
| .id = 4, |
| .dev = { .platform_data = &android_pmem_audio_pdata }, |
| }; |
| #endif |
| |
| struct fmem_platform_data fmem_pdata = { |
| }; |
| |
| #define DSP_RAM_BASE_8960 0x8da00000 |
| #define DSP_RAM_SIZE_8960 0x1800000 |
| static int dspcrashd_pdata_8960 = 0xDEADDEAD; |
| |
| static struct resource resources_dspcrashd_8960[] = { |
| { |
| .name = "msm_dspcrashd", |
| .start = DSP_RAM_BASE_8960, |
| .end = DSP_RAM_BASE_8960 + DSP_RAM_SIZE_8960, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct platform_device msm_device_dspcrashd_8960 = { |
| .name = "msm_dspcrashd", |
| .num_resources = ARRAY_SIZE(resources_dspcrashd_8960), |
| .resource = resources_dspcrashd_8960, |
| .dev = { .platform_data = &dspcrashd_pdata_8960 }, |
| }; |
| |
| static struct memtype_reserve msm8960_reserve_table[] __initdata = { |
| [MEMTYPE_SMI] = { |
| }, |
| [MEMTYPE_EBI0] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| [MEMTYPE_EBI1] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| }; |
| |
| static void __init size_pmem_devices(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| android_pmem_adsp_pdata.size = pmem_adsp_size; |
| |
| if (!pmem_param_set && machine_is_msm8960_liquid()) |
| pmem_size = MSM_LIQUID_PMEM_SIZE; |
| android_pmem_pdata.size = pmem_size; |
| #endif |
| android_pmem_audio_pdata.size = MSM_PMEM_AUDIO_SIZE; |
| #endif |
| } |
| |
| static void __init reserve_memory_for(struct android_pmem_platform_data *p) |
| { |
| msm8960_reserve_table[p->memory_type].size += p->size; |
| } |
| |
| static void __init reserve_pmem_memory(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| reserve_memory_for(&android_pmem_adsp_pdata); |
| reserve_memory_for(&android_pmem_pdata); |
| #endif |
| reserve_memory_for(&android_pmem_audio_pdata); |
| msm8960_reserve_table[MEMTYPE_EBI1].size += pmem_kernel_ebi1_size; |
| #endif |
| } |
| |
| static void __init reserve_fmem_memory(void) |
| { |
| } |
| |
| static int msm8960_paddr_to_memtype(unsigned int paddr) |
| { |
| return MEMTYPE_EBI1; |
| } |
| |
| #ifdef CONFIG_ION_MSM |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static struct ion_cp_heap_pdata cp_mm_ion_pdata = { |
| .permission_type = IPT_TYPE_MM_CARVEOUT, |
| .align = PAGE_SIZE, |
| }; |
| |
| static struct ion_cp_heap_pdata cp_mfc_ion_pdata = { |
| .permission_type = IPT_TYPE_MFC_SHAREDMEM, |
| .align = PAGE_SIZE, |
| }; |
| |
| static struct ion_co_heap_pdata co_ion_pdata = { |
| .adjacent_mem_id = INVALID_HEAP_ID, |
| .align = PAGE_SIZE, |
| }; |
| |
| static struct ion_co_heap_pdata fw_co_ion_pdata = { |
| .adjacent_mem_id = ION_CP_MM_HEAP_ID, |
| .align = SZ_128K, |
| }; |
| #endif |
| static struct ion_platform_data ion_pdata = { |
| .nr = MSM_ION_HEAP_NUM, |
| .heaps = { |
| { |
| .id = ION_SYSTEM_HEAP_ID, |
| .type = ION_HEAP_TYPE_SYSTEM, |
| .name = ION_VMALLOC_HEAP_NAME, |
| }, |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| { |
| .id = ION_SF_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_SF_HEAP_NAME, |
| .size = MSM_ION_SF_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_ion_pdata, |
| }, |
| { |
| .id = ION_CP_MM_HEAP_ID, |
| .type = ION_HEAP_TYPE_CP, |
| .name = ION_MM_HEAP_NAME, |
| .size = MSM_ION_MM_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &cp_mm_ion_pdata, |
| }, |
| { |
| .id = ION_MM_FIRMWARE_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_MM_FIRMWARE_HEAP_NAME, |
| .size = MSM_ION_MM_FW_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &fw_co_ion_pdata, |
| }, |
| { |
| .id = ION_CP_MFC_HEAP_ID, |
| .type = ION_HEAP_TYPE_CP, |
| .name = ION_MFC_HEAP_NAME, |
| .size = MSM_ION_MFC_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &cp_mfc_ion_pdata, |
| }, |
| { |
| .id = ION_IOMMU_HEAP_ID, |
| .type = ION_HEAP_TYPE_IOMMU, |
| .name = ION_IOMMU_HEAP_NAME, |
| }, |
| { |
| .id = ION_QSECOM_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_QSECOM_HEAP_NAME, |
| .size = MSM_ION_QSECOM_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_ion_pdata, |
| }, |
| { |
| .id = ION_AUDIO_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_AUDIO_HEAP_NAME, |
| .size = MSM_ION_AUDIO_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_ion_pdata, |
| }, |
| #endif |
| } |
| }; |
| |
| static struct platform_device ion_dev = { |
| .name = "ion-msm", |
| .id = 1, |
| .dev = { .platform_data = &ion_pdata }, |
| }; |
| #endif |
| |
| struct platform_device fmem_device = { |
| .name = "fmem", |
| .id = 1, |
| .dev = { .platform_data = &fmem_pdata }, |
| }; |
| |
| static void reserve_ion_memory(void) |
| { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| unsigned int i; |
| |
| if (!pmem_param_set && machine_is_msm8960_liquid()) { |
| msm_ion_cp_mm_size = MSM_LIQUID_ION_MM_SIZE; |
| for (i = 0; i < ion_pdata.nr; i++) { |
| if (ion_pdata.heaps[i].id == ION_CP_MM_HEAP_ID) { |
| ion_pdata.heaps[i].size = msm_ion_cp_mm_size; |
| pr_debug("msm_ion_cp_mm_size 0x%x\n", |
| msm_ion_cp_mm_size); |
| break; |
| } |
| } |
| } |
| msm8960_reserve_table[MEMTYPE_EBI1].size += msm_ion_cp_mm_size; |
| msm8960_reserve_table[MEMTYPE_EBI1].size += MSM_ION_MM_FW_SIZE; |
| msm8960_reserve_table[MEMTYPE_EBI1].size += MSM_ION_SF_SIZE; |
| msm8960_reserve_table[MEMTYPE_EBI1].size += MSM_ION_MFC_SIZE; |
| msm8960_reserve_table[MEMTYPE_EBI1].size += MSM_ION_QSECOM_SIZE; |
| msm8960_reserve_table[MEMTYPE_EBI1].size += MSM_ION_AUDIO_SIZE; |
| #endif |
| } |
| |
| static void __init reserve_mdp_memory(void) |
| { |
| msm8960_mdp_writeback(msm8960_reserve_table); |
| } |
| |
| static void __init msm8960_calculate_reserve_sizes(void) |
| { |
| size_pmem_devices(); |
| reserve_pmem_memory(); |
| reserve_ion_memory(); |
| reserve_fmem_memory(); |
| reserve_mdp_memory(); |
| } |
| |
| static struct reserve_info msm8960_reserve_info __initdata = { |
| .memtype_reserve_table = msm8960_reserve_table, |
| .calculate_reserve_sizes = msm8960_calculate_reserve_sizes, |
| .paddr_to_memtype = msm8960_paddr_to_memtype, |
| }; |
| |
| static int msm8960_memory_bank_size(void) |
| { |
| return 1<<29; |
| } |
| |
| static void __init locate_unstable_memory(void) |
| { |
| struct membank *mb = &meminfo.bank[meminfo.nr_banks - 1]; |
| unsigned long bank_size; |
| unsigned long low, high; |
| |
| bank_size = msm8960_memory_bank_size(); |
| low = meminfo.bank[0].start; |
| high = mb->start + mb->size; |
| |
| /* Check if 32 bit overflow occured */ |
| if (high < mb->start) |
| high = ~0UL; |
| |
| low &= ~(bank_size - 1); |
| |
| if (high - low <= bank_size) |
| return; |
| msm8960_reserve_info.low_unstable_address = high - |
| MIN_MEMORY_BLOCK_SIZE; |
| msm8960_reserve_info.max_unstable_size = MIN_MEMORY_BLOCK_SIZE; |
| |
| msm8960_reserve_info.bank_size = bank_size; |
| pr_info("low unstable address %lx max size %lx bank size %lx\n", |
| msm8960_reserve_info.low_unstable_address, |
| msm8960_reserve_info.max_unstable_size, |
| msm8960_reserve_info.bank_size); |
| } |
| |
| static void __init place_movable_zone(void) |
| { |
| movable_reserved_start = msm8960_reserve_info.low_unstable_address; |
| movable_reserved_size = msm8960_reserve_info.max_unstable_size; |
| pr_info("movable zone start %lx size %lx\n", |
| movable_reserved_start, movable_reserved_size); |
| } |
| |
| static void __init msm8960_early_memory(void) |
| { |
| reserve_info = &msm8960_reserve_info; |
| locate_unstable_memory(); |
| place_movable_zone(); |
| } |
| |
| static void __init msm8960_reserve(void) |
| { |
| msm_reserve(); |
| fmem_pdata.phys = reserve_memory_for_fmem(fmem_pdata.size); |
| } |
| |
| static int msm8960_change_memory_power(u64 start, u64 size, |
| int change_type) |
| { |
| return soc_change_memory_power(start, size, change_type); |
| } |
| |
| static void __init msm8960_allocate_memory_regions(void) |
| { |
| msm8960_allocate_fb_region(); |
| } |
| |
| #ifdef CONFIG_WCD9310_CODEC |
| |
| #define TABLA_INTERRUPT_BASE (NR_MSM_IRQS + NR_GPIO_IRQS + NR_PM8921_IRQS) |
| |
| /* Micbias setting is based on 8660 CDP/MTP/FLUID requirement |
| * 4 micbiases are used to power various analog and digital |
| * microphones operating at 1800 mV. Technically, all micbiases |
| * can source from single cfilter since all microphones operate |
| * at the same voltage level. The arrangement below is to make |
| * sure all cfilters are exercised. LDO_H regulator ouput level |
| * does not need to be as high as 2.85V. It is choosen for |
| * microphone sensitivity purpose. |
| */ |
| static struct tabla_pdata tabla_platform_data = { |
| .slimbus_slave_device = { |
| .name = "tabla-slave", |
| .e_addr = {0, 0, 0x10, 0, 0x17, 2}, |
| }, |
| .irq = MSM_GPIO_TO_INT(62), |
| .irq_base = TABLA_INTERRUPT_BASE, |
| .num_irqs = NR_TABLA_IRQS, |
| .reset_gpio = PM8921_GPIO_PM_TO_SYS(34), |
| .micbias = { |
| .ldoh_v = TABLA_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 1800, |
| .cfilt3_mv = 1800, |
| .bias1_cfilt_sel = TABLA_CFILT1_SEL, |
| .bias2_cfilt_sel = TABLA_CFILT2_SEL, |
| .bias3_cfilt_sel = TABLA_CFILT3_SEL, |
| .bias4_cfilt_sel = TABLA_CFILT3_SEL, |
| } |
| }; |
| |
| static struct slim_device msm_slim_tabla = { |
| .name = "tabla-slim", |
| .e_addr = {0, 1, 0x10, 0, 0x17, 2}, |
| .dev = { |
| .platform_data = &tabla_platform_data, |
| }, |
| }; |
| |
| static struct tabla_pdata tabla20_platform_data = { |
| .slimbus_slave_device = { |
| .name = "tabla-slave", |
| .e_addr = {0, 0, 0x60, 0, 0x17, 2}, |
| }, |
| .irq = MSM_GPIO_TO_INT(62), |
| .irq_base = TABLA_INTERRUPT_BASE, |
| .num_irqs = NR_TABLA_IRQS, |
| .reset_gpio = PM8921_GPIO_PM_TO_SYS(34), |
| .micbias = { |
| .ldoh_v = TABLA_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 1800, |
| .cfilt3_mv = 1800, |
| .bias1_cfilt_sel = TABLA_CFILT1_SEL, |
| .bias2_cfilt_sel = TABLA_CFILT2_SEL, |
| .bias3_cfilt_sel = TABLA_CFILT3_SEL, |
| .bias4_cfilt_sel = TABLA_CFILT3_SEL, |
| } |
| }; |
| |
| static struct slim_device msm_slim_tabla20 = { |
| .name = "tabla2x-slim", |
| .e_addr = {0, 1, 0x60, 0, 0x17, 2}, |
| .dev = { |
| .platform_data = &tabla20_platform_data, |
| }, |
| }; |
| #endif |
| |
| static struct slim_boardinfo msm_slim_devices[] = { |
| #ifdef CONFIG_WCD9310_CODEC |
| { |
| .bus_num = 1, |
| .slim_slave = &msm_slim_tabla, |
| }, |
| { |
| .bus_num = 1, |
| .slim_slave = &msm_slim_tabla20, |
| }, |
| #endif |
| /* add more slimbus slaves as needed */ |
| }; |
| |
| #define MSM_WCNSS_PHYS 0x03000000 |
| #define MSM_WCNSS_SIZE 0x280000 |
| |
| static struct resource resources_wcnss_wlan[] = { |
| { |
| .start = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| .end = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| .name = "wcnss_wlanrx_irq", |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| .end = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| .name = "wcnss_wlantx_irq", |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = MSM_WCNSS_PHYS, |
| .end = MSM_WCNSS_PHYS + MSM_WCNSS_SIZE - 1, |
| .name = "wcnss_mmio", |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = 84, |
| .end = 88, |
| .name = "wcnss_gpios_5wire", |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct qcom_wcnss_opts qcom_wcnss_pdata = { |
| .has_48mhz_xo = 1, |
| }; |
| |
| static struct platform_device msm_device_wcnss_wlan = { |
| .name = "wcnss_wlan", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(resources_wcnss_wlan), |
| .resource = resources_wcnss_wlan, |
| .dev = {.platform_data = &qcom_wcnss_pdata}, |
| }; |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| |
| #define QCE_SIZE 0x10000 |
| #define QCE_0_BASE 0x18500000 |
| |
| #define QCE_HW_KEY_SUPPORT 0 |
| #define QCE_SHA_HMAC_SUPPORT 1 |
| #define QCE_SHARE_CE_RESOURCE 1 |
| #define QCE_CE_SHARED 0 |
| |
| /* Begin Bus scaling definitions */ |
| static struct msm_bus_vectors crypto_hw_init_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT0, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 0, |
| .ib = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT1, |
| .dst = MSM_BUS_SLAVE_GSBI1_UART, |
| .ab = 0, |
| .ib = 0, |
| }, |
| }; |
| |
| static struct msm_bus_vectors crypto_hw_active_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT0, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 70000000UL, |
| .ib = 70000000UL, |
| }, |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT1, |
| .dst = MSM_BUS_SLAVE_GSBI1_UART, |
| .ab = 2480000000UL, |
| .ib = 2480000000UL, |
| }, |
| }; |
| |
| static struct msm_bus_paths crypto_hw_bus_scale_usecases[] = { |
| { |
| ARRAY_SIZE(crypto_hw_init_vectors), |
| crypto_hw_init_vectors, |
| }, |
| { |
| ARRAY_SIZE(crypto_hw_active_vectors), |
| crypto_hw_active_vectors, |
| }, |
| }; |
| |
| static struct msm_bus_scale_pdata crypto_hw_bus_scale_pdata = { |
| crypto_hw_bus_scale_usecases, |
| ARRAY_SIZE(crypto_hw_bus_scale_usecases), |
| .name = "cryptohw", |
| }; |
| /* End Bus Scaling Definitions*/ |
| |
| static struct resource qcrypto_resources[] = { |
| [0] = { |
| .start = QCE_0_BASE, |
| .end = QCE_0_BASE + QCE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "crypto_channels", |
| .start = DMOV_CE_IN_CHAN, |
| .end = DMOV_CE_OUT_CHAN, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .name = "crypto_crci_in", |
| .start = DMOV_CE_IN_CRCI, |
| .end = DMOV_CE_IN_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .name = "crypto_crci_out", |
| .start = DMOV_CE_OUT_CRCI, |
| .end = DMOV_CE_OUT_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct resource qcedev_resources[] = { |
| [0] = { |
| .start = QCE_0_BASE, |
| .end = QCE_0_BASE + QCE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "crypto_channels", |
| .start = DMOV_CE_IN_CHAN, |
| .end = DMOV_CE_OUT_CHAN, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .name = "crypto_crci_in", |
| .start = DMOV_CE_IN_CRCI, |
| .end = DMOV_CE_IN_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .name = "crypto_crci_out", |
| .start = DMOV_CE_OUT_CRCI, |
| .end = DMOV_CE_OUT_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| |
| static struct msm_ce_hw_support qcrypto_ce_hw_suppport = { |
| .ce_shared = QCE_CE_SHARED, |
| .shared_ce_resource = QCE_SHARE_CE_RESOURCE, |
| .hw_key_support = QCE_HW_KEY_SUPPORT, |
| .sha_hmac = QCE_SHA_HMAC_SUPPORT, |
| .bus_scale_table = &crypto_hw_bus_scale_pdata, |
| }; |
| |
| static struct platform_device qcrypto_device = { |
| .name = "qcrypto", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(qcrypto_resources), |
| .resource = qcrypto_resources, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &qcrypto_ce_hw_suppport, |
| }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| |
| static struct msm_ce_hw_support qcedev_ce_hw_suppport = { |
| .ce_shared = QCE_CE_SHARED, |
| .shared_ce_resource = QCE_SHARE_CE_RESOURCE, |
| .hw_key_support = QCE_HW_KEY_SUPPORT, |
| .sha_hmac = QCE_SHA_HMAC_SUPPORT, |
| .bus_scale_table = &crypto_hw_bus_scale_pdata, |
| }; |
| |
| static struct platform_device qcedev_device = { |
| .name = "qce", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(qcedev_resources), |
| .resource = qcedev_resources, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &qcedev_ce_hw_suppport, |
| }, |
| }; |
| #endif |
| |
| #define MDM2AP_ERRFATAL 70 |
| #define AP2MDM_ERRFATAL 95 |
| #define MDM2AP_STATUS 69 |
| #define AP2MDM_STATUS 94 |
| #define AP2MDM_PMIC_RESET_N 80 |
| #define AP2MDM_KPDPWR_N 81 |
| |
| static struct resource mdm_resources[] = { |
| { |
| .start = MDM2AP_ERRFATAL, |
| .end = MDM2AP_ERRFATAL, |
| .name = "MDM2AP_ERRFATAL", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_ERRFATAL, |
| .end = AP2MDM_ERRFATAL, |
| .name = "AP2MDM_ERRFATAL", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = MDM2AP_STATUS, |
| .end = MDM2AP_STATUS, |
| .name = "MDM2AP_STATUS", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_STATUS, |
| .end = AP2MDM_STATUS, |
| .name = "AP2MDM_STATUS", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_PMIC_RESET_N, |
| .end = AP2MDM_PMIC_RESET_N, |
| .name = "AP2MDM_PMIC_RESET_N", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_KPDPWR_N, |
| .end = AP2MDM_KPDPWR_N, |
| .name = "AP2MDM_KPDPWR_N", |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct mdm_platform_data mdm_platform_data = { |
| .mdm_version = "2.5", |
| }; |
| |
| static struct platform_device mdm_device = { |
| .name = "mdm2_modem", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(mdm_resources), |
| .resource = mdm_resources, |
| .dev = { |
| .platform_data = &mdm_platform_data, |
| }, |
| }; |
| |
| static struct platform_device *mdm_devices[] __initdata = { |
| &mdm_device, |
| }; |
| |
| #define MSM_SHARED_RAM_PHYS 0x80000000 |
| |
| static void __init msm8960_map_io(void) |
| { |
| msm_shared_ram_phys = MSM_SHARED_RAM_PHYS; |
| msm_map_msm8960_io(); |
| |
| if (socinfo_init() < 0) |
| pr_err("socinfo_init() failed!\n"); |
| } |
| |
| static void __init msm8960_init_irq(void) |
| { |
| msm_mpm_irq_extn_init(); |
| gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, |
| (void *)MSM_QGIC_CPU_BASE); |
| |
| /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ |
| writel_relaxed(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); |
| |
| writel_relaxed(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); |
| mb(); |
| } |
| |
| static void __init msm8960_init_buses(void) |
| { |
| #ifdef CONFIG_MSM_BUS_SCALING |
| msm_bus_rpm_set_mt_mask(); |
| msm_bus_8960_apps_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8960_sys_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8960_mm_fabric_pdata.rpm_enabled = 1; |
| msm_bus_apps_fabric.dev.platform_data = |
| &msm_bus_8960_apps_fabric_pdata; |
| msm_bus_sys_fabric.dev.platform_data = &msm_bus_8960_sys_fabric_pdata; |
| msm_bus_mm_fabric.dev.platform_data = &msm_bus_8960_mm_fabric_pdata; |
| msm_bus_sys_fpb.dev.platform_data = &msm_bus_8960_sys_fpb_pdata; |
| msm_bus_cpss_fpb.dev.platform_data = &msm_bus_8960_cpss_fpb_pdata; |
| #endif |
| } |
| |
| static struct msm_spi_platform_data msm8960_qup_spi_gsbi1_pdata = { |
| .max_clock_speed = 15060000, |
| }; |
| |
| #ifdef CONFIG_USB_MSM_OTG_72K |
| static struct msm_otg_platform_data msm_otg_pdata; |
| #else |
| static int wr_phy_init_seq[] = { |
| 0x44, 0x80, /* set VBUS valid threshold |
| and disconnect valid threshold */ |
| 0x38, 0x81, /* update DC voltage level */ |
| 0x14, 0x82, /* set preemphasis and rise/fall time */ |
| 0x13, 0x83, /* set source impedance adjusment */ |
| -1}; |
| |
| static int liquid_v1_phy_init_seq[] = { |
| 0x44, 0x80,/* set VBUS valid threshold |
| and disconnect valid threshold */ |
| 0x3C, 0x81,/* update DC voltage level */ |
| 0x18, 0x82,/* set preemphasis and rise/fall time */ |
| 0x23, 0x83,/* set source impedance sdjusment */ |
| -1}; |
| |
| static struct msm_otg_platform_data msm_otg_pdata = { |
| .mode = USB_OTG, |
| .otg_control = OTG_PMIC_CONTROL, |
| .phy_type = SNPS_28NM_INTEGRATED_PHY, |
| .pmic_id_irq = PM8921_USB_ID_IN_IRQ(PM8921_IRQ_BASE), |
| .power_budget = 750, |
| }; |
| #endif |
| |
| #ifdef CONFIG_USB_EHCI_MSM_HSIC |
| #define HSIC_HUB_RESET_GPIO 91 |
| static struct msm_hsic_host_platform_data msm_hsic_pdata = { |
| .strobe = 150, |
| .data = 151, |
| }; |
| #else |
| static struct msm_hsic_host_platform_data msm_hsic_pdata; |
| #endif |
| |
| #define PID_MAGIC_ID 0x71432909 |
| #define SERIAL_NUM_MAGIC_ID 0x61945374 |
| #define SERIAL_NUMBER_LENGTH 127 |
| #define DLOAD_USB_BASE_ADD 0x2A03F0C8 |
| |
| struct magic_num_struct { |
| uint32_t pid; |
| uint32_t serial_num; |
| }; |
| |
| struct dload_struct { |
| uint32_t reserved1; |
| uint32_t reserved2; |
| uint32_t reserved3; |
| uint16_t reserved4; |
| uint16_t pid; |
| char serial_number[SERIAL_NUMBER_LENGTH]; |
| uint16_t reserved5; |
| struct magic_num_struct magic_struct; |
| }; |
| |
| static int usb_diag_update_pid_and_serial_num(uint32_t pid, const char *snum) |
| { |
| struct dload_struct __iomem *dload = 0; |
| |
| dload = ioremap(DLOAD_USB_BASE_ADD, sizeof(*dload)); |
| if (!dload) { |
| pr_err("%s: cannot remap I/O memory region: %08x\n", |
| __func__, DLOAD_USB_BASE_ADD); |
| return -ENXIO; |
| } |
| |
| pr_debug("%s: dload:%p pid:%x serial_num:%s\n", |
| __func__, dload, pid, snum); |
| /* update pid */ |
| dload->magic_struct.pid = PID_MAGIC_ID; |
| dload->pid = pid; |
| |
| /* update serial number */ |
| dload->magic_struct.serial_num = 0; |
| if (!snum) { |
| memset(dload->serial_number, 0, SERIAL_NUMBER_LENGTH); |
| goto out; |
| } |
| |
| dload->magic_struct.serial_num = SERIAL_NUM_MAGIC_ID; |
| strlcpy(dload->serial_number, snum, SERIAL_NUMBER_LENGTH); |
| out: |
| iounmap(dload); |
| return 0; |
| } |
| |
| static struct android_usb_platform_data android_usb_pdata = { |
| .update_pid_and_serial_num = usb_diag_update_pid_and_serial_num, |
| }; |
| |
| static struct platform_device android_usb_device = { |
| .name = "android_usb", |
| .id = -1, |
| .dev = { |
| .platform_data = &android_usb_pdata, |
| }, |
| }; |
| |
| static uint8_t spm_wfi_cmd_sequence[] __initdata = { |
| 0x03, 0x0f, |
| }; |
| |
| static uint8_t spm_power_collapse_without_rpm[] __initdata = { |
| 0x00, 0x24, 0x54, 0x10, |
| 0x09, 0x03, 0x01, |
| 0x10, 0x54, 0x30, 0x0C, |
| 0x24, 0x30, 0x0f, |
| }; |
| |
| static uint8_t spm_power_collapse_with_rpm[] __initdata = { |
| 0x00, 0x24, 0x54, 0x10, |
| 0x09, 0x07, 0x01, 0x0B, |
| 0x10, 0x54, 0x30, 0x0C, |
| 0x24, 0x30, 0x0f, |
| }; |
| |
| static struct msm_spm_seq_entry msm_spm_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_MODE_CLOCK_GATING, |
| .notify_rpm = false, |
| .cmd = spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = false, |
| .cmd = spm_power_collapse_without_rpm, |
| }, |
| [2] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = spm_power_collapse_with_rpm, |
| }, |
| }; |
| |
| static struct msm_spm_platform_data msm_spm_data[] __initdata = { |
| [0] = { |
| .reg_base_addr = MSM_SAW0_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_SECURE] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| .reg_init_values[MSM_SPM_REG_SAW2_VCTL] = 0xB0, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020202, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_seq_list), |
| .modes = msm_spm_seq_list, |
| }, |
| [1] = { |
| .reg_base_addr = MSM_SAW1_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_SECURE] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| .reg_init_values[MSM_SPM_REG_SAW2_VCTL] = 0xB0, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020202, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_seq_list), |
| .modes = msm_spm_seq_list, |
| }, |
| }; |
| |
| static uint8_t l2_spm_wfi_cmd_sequence[] __initdata = { |
| 0x00, 0x20, 0x03, 0x20, |
| 0x00, 0x0f, |
| }; |
| |
| static uint8_t l2_spm_gdhs_cmd_sequence[] __initdata = { |
| 0x00, 0x20, 0x34, 0x64, |
| 0x48, 0x07, 0x48, 0x20, |
| 0x50, 0x64, 0x04, 0x34, |
| 0x50, 0x0f, |
| }; |
| static uint8_t l2_spm_power_off_cmd_sequence[] __initdata = { |
| 0x00, 0x10, 0x34, 0x64, |
| 0x48, 0x07, 0x48, 0x10, |
| 0x50, 0x64, 0x04, 0x34, |
| 0x50, 0x0F, |
| }; |
| |
| static struct msm_spm_seq_entry msm_spm_l2_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_L2_MODE_RETENTION, |
| .notify_rpm = false, |
| .cmd = l2_spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_L2_MODE_GDHS, |
| .notify_rpm = true, |
| .cmd = l2_spm_gdhs_cmd_sequence, |
| }, |
| [2] = { |
| .mode = MSM_SPM_L2_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = l2_spm_power_off_cmd_sequence, |
| }, |
| }; |
| |
| static struct msm_spm_platform_data msm_spm_l2_data[] __initdata = { |
| [0] = { |
| .reg_base_addr = MSM_SAW_L2_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_SECURE] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020202, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x00A000AE, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A00020, |
| .modes = msm_spm_l2_seq_list, |
| .num_modes = ARRAY_SIZE(msm_spm_l2_seq_list), |
| }, |
| }; |
| |
| #define PM_HAP_EN_GPIO PM8921_GPIO_PM_TO_SYS(33) |
| #define PM_HAP_LEN_GPIO PM8921_GPIO_PM_TO_SYS(20) |
| |
| static struct msm_xo_voter *xo_handle_d1; |
| |
| static int isa1200_power(int on) |
| { |
| int rc = 0; |
| |
| gpio_set_value(HAP_SHIFT_LVL_OE_GPIO, !!on); |
| |
| rc = on ? msm_xo_mode_vote(xo_handle_d1, MSM_XO_MODE_ON) : |
| msm_xo_mode_vote(xo_handle_d1, MSM_XO_MODE_OFF); |
| if (rc < 0) { |
| pr_err("%s: failed to %svote for TCXO D1 buffer%d\n", |
| __func__, on ? "" : "de-", rc); |
| goto err_xo_vote; |
| } |
| |
| return 0; |
| |
| err_xo_vote: |
| gpio_set_value(HAP_SHIFT_LVL_OE_GPIO, !on); |
| return rc; |
| } |
| |
| static int isa1200_dev_setup(bool enable) |
| { |
| int rc = 0; |
| |
| struct pm_gpio hap_gpio_config = { |
| .direction = PM_GPIO_DIR_OUT, |
| .pull = PM_GPIO_PULL_NO, |
| .out_strength = PM_GPIO_STRENGTH_HIGH, |
| .function = PM_GPIO_FUNC_NORMAL, |
| .inv_int_pol = 0, |
| .vin_sel = 2, |
| .output_buffer = PM_GPIO_OUT_BUF_CMOS, |
| .output_value = 0, |
| }; |
| |
| if (enable == true) { |
| rc = pm8xxx_gpio_config(PM_HAP_EN_GPIO, &hap_gpio_config); |
| if (rc) { |
| pr_err("%s: pm8921 gpio %d config failed(%d)\n", |
| __func__, PM_HAP_EN_GPIO, rc); |
| return rc; |
| } |
| |
| rc = pm8xxx_gpio_config(PM_HAP_LEN_GPIO, &hap_gpio_config); |
| if (rc) { |
| pr_err("%s: pm8921 gpio %d config failed(%d)\n", |
| __func__, PM_HAP_LEN_GPIO, rc); |
| return rc; |
| } |
| |
| rc = gpio_request(HAP_SHIFT_LVL_OE_GPIO, "hap_shft_lvl_oe"); |
| if (rc) { |
| pr_err("%s: unable to request gpio %d (%d)\n", |
| __func__, HAP_SHIFT_LVL_OE_GPIO, rc); |
| return rc; |
| } |
| |
| rc = gpio_direction_output(HAP_SHIFT_LVL_OE_GPIO, 0); |
| if (rc) { |
| pr_err("%s: Unable to set direction\n", __func__); |
| goto free_gpio; |
| } |
| |
| xo_handle_d1 = msm_xo_get(MSM_XO_TCXO_D1, "isa1200"); |
| if (IS_ERR(xo_handle_d1)) { |
| rc = PTR_ERR(xo_handle_d1); |
| pr_err("%s: failed to get the handle for D1(%d)\n", |
| __func__, rc); |
| goto gpio_set_dir; |
| } |
| } else { |
| gpio_free(HAP_SHIFT_LVL_OE_GPIO); |
| |
| msm_xo_put(xo_handle_d1); |
| } |
| |
| return 0; |
| |
| gpio_set_dir: |
| gpio_set_value(HAP_SHIFT_LVL_OE_GPIO, 0); |
| free_gpio: |
| gpio_free(HAP_SHIFT_LVL_OE_GPIO); |
| return rc; |
| } |
| |
| static struct isa1200_regulator isa1200_reg_data[] = { |
| { |
| .name = "vcc_i2c", |
| .min_uV = ISA_I2C_VTG_MIN_UV, |
| .max_uV = ISA_I2C_VTG_MAX_UV, |
| .load_uA = ISA_I2C_CURR_UA, |
| }, |
| }; |
| |
| static struct isa1200_platform_data isa1200_1_pdata = { |
| .name = "vibrator", |
| .dev_setup = isa1200_dev_setup, |
| .power_on = isa1200_power, |
| .hap_en_gpio = PM_HAP_EN_GPIO, |
| .hap_len_gpio = PM_HAP_LEN_GPIO, |
| .max_timeout = 15000, |
| .mode_ctrl = PWM_GEN_MODE, |
| .pwm_fd = { |
| .pwm_div = 256, |
| }, |
| .is_erm = false, |
| .smart_en = true, |
| .ext_clk_en = true, |
| .chip_en = 1, |
| .regulator_info = isa1200_reg_data, |
| .num_regulators = ARRAY_SIZE(isa1200_reg_data), |
| }; |
| |
| static struct i2c_board_info msm_isa1200_board_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("isa1200_1", 0x90>>1), |
| }, |
| }; |
| |
| #define CYTTSP_TS_GPIO_IRQ 11 |
| #define CYTTSP_TS_SLEEP_GPIO 50 |
| #define CYTTSP_TS_RESOUT_N_GPIO 52 |
| |
| /*virtual key support */ |
| static ssize_t tma340_vkeys_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| return snprintf(buf, 200, |
| __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":73:1120:97:97" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":230:1120:97:97" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":389:1120:97:97" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":544:1120:97:97" |
| "\n"); |
| } |
| |
| static struct kobj_attribute tma340_vkeys_attr = { |
| .attr = { |
| .mode = S_IRUGO, |
| }, |
| .show = &tma340_vkeys_show, |
| }; |
| |
| static struct attribute *tma340_properties_attrs[] = { |
| &tma340_vkeys_attr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group tma340_properties_attr_group = { |
| .attrs = tma340_properties_attrs, |
| }; |
| |
| |
| static int cyttsp_platform_init(struct i2c_client *client) |
| { |
| int rc = 0; |
| static struct kobject *tma340_properties_kobj; |
| |
| tma340_vkeys_attr.attr.name = "virtualkeys.cyttsp-i2c"; |
| tma340_properties_kobj = kobject_create_and_add("board_properties", |
| NULL); |
| if (tma340_properties_kobj) |
| rc = sysfs_create_group(tma340_properties_kobj, |
| &tma340_properties_attr_group); |
| if (!tma340_properties_kobj || rc) |
| pr_err("%s: failed to create board_properties\n", |
| __func__); |
| |
| return 0; |
| } |
| |
| static struct cyttsp_regulator regulator_data[] = { |
| { |
| .name = "vdd", |
| .min_uV = CY_TMA300_VTG_MIN_UV, |
| .max_uV = CY_TMA300_VTG_MAX_UV, |
| .hpm_load_uA = CY_TMA300_CURR_24HZ_UA, |
| .lpm_load_uA = CY_TMA300_SLEEP_CURR_UA, |
| }, |
| /* TODO: Remove after runtime PM is enabled in I2C driver */ |
| { |
| .name = "vcc_i2c", |
| .min_uV = CY_I2C_VTG_MIN_UV, |
| .max_uV = CY_I2C_VTG_MAX_UV, |
| .hpm_load_uA = CY_I2C_CURR_UA, |
| .lpm_load_uA = CY_I2C_SLEEP_CURR_UA, |
| }, |
| }; |
| |
| static struct cyttsp_platform_data cyttsp_pdata = { |
| .panel_maxx = 634, |
| .panel_maxy = 1166, |
| .disp_maxx = 616, |
| .disp_maxy = 1023, |
| .disp_minx = 0, |
| .disp_miny = 16, |
| .flags = 0x01, |
| .gen = CY_GEN3, /* or */ |
| .use_st = CY_USE_ST, |
| .use_mt = CY_USE_MT, |
| .use_hndshk = CY_SEND_HNDSHK, |
| .use_trk_id = CY_USE_TRACKING_ID, |
| .use_sleep = CY_USE_DEEP_SLEEP_SEL | CY_USE_LOW_POWER_SEL, |
| .use_gestures = CY_USE_GESTURES, |
| .fw_fname = "cyttsp_8960_cdp.hex", |
| /* activate up to 4 groups |
| * and set active distance |
| */ |
| .gest_set = CY_GEST_GRP1 | CY_GEST_GRP2 | |
| CY_GEST_GRP3 | CY_GEST_GRP4 | |
| CY_ACT_DIST, |
| /* change act_intrvl to customize the Active power state |
| * scanning/processing refresh interval for Operating mode |
| */ |
| .act_intrvl = CY_ACT_INTRVL_DFLT, |
| /* change tch_tmout to customize the touch timeout for the |
| * Active power state for Operating mode |
| */ |
| .tch_tmout = CY_TCH_TMOUT_DFLT, |
| /* change lp_intrvl to customize the Low Power power state |
| * scanning/processing refresh interval for Operating mode |
| */ |
| .lp_intrvl = CY_LP_INTRVL_DFLT, |
| .sleep_gpio = CYTTSP_TS_SLEEP_GPIO, |
| .resout_gpio = CYTTSP_TS_RESOUT_N_GPIO, |
| .irq_gpio = CYTTSP_TS_GPIO_IRQ, |
| .regulator_info = regulator_data, |
| .num_regulators = ARRAY_SIZE(regulator_data), |
| .init = cyttsp_platform_init, |
| .correct_fw_ver = 9, |
| }; |
| |
| static struct i2c_board_info cyttsp_info[] __initdata = { |
| { |
| I2C_BOARD_INFO(CY_I2C_NAME, 0x24), |
| .platform_data = &cyttsp_pdata, |
| #ifndef CY_USE_TIMER |
| .irq = MSM_GPIO_TO_INT(CYTTSP_TS_GPIO_IRQ), |
| #endif /* CY_USE_TIMER */ |
| }, |
| }; |
| |
| /* configuration data */ |
| static const u8 mxt_config_data[] = { |
| /* T6 Object */ |
| 0, 0, 0, 0, 0, 0, |
| /* T38 Object */ |
| 11, 2, 0, 11, 11, 11, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, |
| /* T7 Object */ |
| 100, 16, 50, |
| /* T8 Object */ |
| 8, 0, 0, 0, 0, 0, 8, 14, 50, 215, |
| /* T9 Object */ |
| 131, 0, 0, 26, 42, 0, 32, 63, 3, 5, |
| 0, 2, 1, 113, 10, 10, 8, 10, 255, 2, |
| 85, 5, 0, 0, 20, 20, 75, 25, 202, 29, |
| 10, 10, 45, 46, |
| /* T15 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, |
| /* T18 Object */ |
| 0, 0, |
| /* T22 Object */ |
| 5, 0, 0, 0, 0, 0, 0, 0, 30, 0, |
| 0, 0, 5, 8, 10, 13, 0, |
| /* T24 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| /* T25 Object */ |
| 3, 0, 188, 52, 52, 33, 0, 0, 0, 0, |
| 0, 0, 0, 0, |
| /* T27 Object */ |
| 0, 0, 0, 0, 0, 0, 0, |
| /* T28 Object */ |
| 0, 0, 0, 8, 12, 60, |
| /* T40 Object */ |
| 0, 0, 0, 0, 0, |
| /* T41 Object */ |
| 0, 0, 0, 0, 0, 0, |
| /* T43 Object */ |
| 0, 0, 0, 0, 0, 0, |
| }; |
| |
| #define MXT_TS_GPIO_IRQ 11 |
| #define MXT_TS_LDO_EN_GPIO 50 |
| #define MXT_TS_RESET_GPIO 52 |
| |
| static void mxt_init_hw_liquid(void) |
| { |
| int rc; |
| |
| rc = gpio_request(MXT_TS_LDO_EN_GPIO, "mxt_ldo_en_gpio"); |
| if (rc) { |
| pr_err("%s: unable to request mxt_ldo_en_gpio [%d]\n", |
| __func__, MXT_TS_LDO_EN_GPIO); |
| return; |
| } |
| |
| rc = gpio_direction_output(MXT_TS_LDO_EN_GPIO, 1); |
| if (rc) { |
| pr_err("%s: unable to set_direction for mxt_ldo_en_gpio [%d]\n", |
| __func__, MXT_TS_LDO_EN_GPIO); |
| goto err_ldo_gpio_req; |
| } |
| |
| return; |
| |
| err_ldo_gpio_req: |
| gpio_free(MXT_TS_LDO_EN_GPIO); |
| } |
| |
| static struct mxt_platform_data mxt_platform_data = { |
| .config = mxt_config_data, |
| .config_length = ARRAY_SIZE(mxt_config_data), |
| .x_size = 1365, |
| .y_size = 767, |
| .irqflags = IRQF_TRIGGER_FALLING, |
| .i2c_pull_up = true, |
| .reset_gpio = MXT_TS_RESET_GPIO, |
| .irq_gpio = MXT_TS_GPIO_IRQ, |
| }; |
| |
| static struct i2c_board_info mxt_device_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("atmel_mxt_ts", 0x5b), |
| .platform_data = &mxt_platform_data, |
| .irq = MSM_GPIO_TO_INT(MXT_TS_GPIO_IRQ), |
| }, |
| }; |
| |
| static struct i2c_board_info sii_device_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("Sil-9244", 0x39), |
| .flags = I2C_CLIENT_WAKE, |
| .irq = MSM_GPIO_TO_INT(15), |
| }, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi4_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi3_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi10_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi12_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_rpm_platform_data msm_rpm_data = { |
| .reg_base_addrs = { |
| [MSM_RPM_PAGE_STATUS] = MSM_RPM_BASE, |
| [MSM_RPM_PAGE_CTRL] = MSM_RPM_BASE + 0x400, |
| [MSM_RPM_PAGE_REQ] = MSM_RPM_BASE + 0x600, |
| [MSM_RPM_PAGE_ACK] = MSM_RPM_BASE + 0xa00, |
| }, |
| |
| .irq_ack = RPM_APCC_CPU0_GP_HIGH_IRQ, |
| .irq_err = RPM_APCC_CPU0_GP_LOW_IRQ, |
| .irq_vmpm = RPM_APCC_CPU0_GP_MEDIUM_IRQ, |
| .msm_apps_ipc_rpm_reg = MSM_APCS_GCC_BASE + 0x008, |
| .msm_apps_ipc_rpm_val = 4, |
| }; |
| |
| static struct msm_pm_sleep_status_data msm_pm_slp_sts_data = { |
| .base_addr = MSM_ACC0_BASE + 0x08, |
| .cpu_offset = MSM_ACC1_BASE - MSM_ACC0_BASE, |
| .mask = 1UL << 13, |
| }; |
| |
| static struct ks8851_pdata spi_eth_pdata = { |
| .irq_gpio = KS8851_IRQ_GPIO, |
| .rst_gpio = KS8851_RST_GPIO, |
| }; |
| |
| static struct spi_board_info spi_board_info[] __initdata = { |
| { |
| .modalias = "ks8851", |
| .irq = MSM_GPIO_TO_INT(KS8851_IRQ_GPIO), |
| .max_speed_hz = 19200000, |
| .bus_num = 0, |
| .chip_select = 0, |
| .mode = SPI_MODE_0, |
| .platform_data = &spi_eth_pdata |
| }, |
| { |
| .modalias = "dsi_novatek_3d_panel_spi", |
| .max_speed_hz = 10800000, |
| .bus_num = 0, |
| .chip_select = 1, |
| .mode = SPI_MODE_0, |
| }, |
| }; |
| |
| static struct platform_device msm_device_saw_core0 = { |
| .name = "saw-regulator", |
| .id = 0, |
| .dev = { |
| .platform_data = &msm_saw_regulator_pdata_s5, |
| }, |
| }; |
| |
| static struct platform_device msm_device_saw_core1 = { |
| .name = "saw-regulator", |
| .id = 1, |
| .dev = { |
| .platform_data = &msm_saw_regulator_pdata_s6, |
| }, |
| }; |
| |
| static struct tsens_platform_data msm_tsens_pdata = { |
| .slope = 910, |
| .tsens_factor = 1000, |
| .hw_type = MSM_8960, |
| .tsens_num_sensor = 5, |
| }; |
| |
| static struct platform_device msm_tsens_device = { |
| .name = "tsens8960-tm", |
| .id = -1, |
| .dev = { |
| .platform_data = &msm_tsens_pdata, |
| }, |
| }; |
| |
| #ifdef CONFIG_MSM_FAKE_BATTERY |
| static struct platform_device fish_battery_device = { |
| .name = "fish_battery", |
| }; |
| #endif |
| |
| static struct platform_device msm8960_device_ext_5v_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_MPP_PM_TO_SYS(7), |
| .dev = { |
| .platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_5V], |
| }, |
| }; |
| |
| static struct platform_device msm8960_device_ext_l2_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = 91, |
| .dev = { |
| .platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_L2], |
| }, |
| }; |
| |
| static struct platform_device msm8960_device_ext_3p3v_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_GPIO_PM_TO_SYS(17), |
| .dev = { |
| .platform_data = |
| &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_3P3V], |
| }, |
| }; |
| |
| static struct platform_device msm8960_device_ext_otg_sw_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_GPIO_PM_TO_SYS(42), |
| .dev = { |
| .platform_data = |
| &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_OTG_SW], |
| }, |
| }; |
| |
| static struct platform_device msm8960_device_rpm_regulator __devinitdata = { |
| .name = "rpm-regulator", |
| .id = -1, |
| .dev = { |
| .platform_data = &msm_rpm_regulator_pdata, |
| }, |
| }; |
| |
| static struct msm_rpm_log_platform_data msm_rpm_log_pdata = { |
| .phys_addr_base = 0x0010C000, |
| .reg_offsets = { |
| [MSM_RPM_LOG_PAGE_INDICES] = 0x00000080, |
| [MSM_RPM_LOG_PAGE_BUFFER] = 0x000000A0, |
| }, |
| .phys_size = SZ_8K, |
| .log_len = 4096, /* log's buffer length in bytes */ |
| .log_len_mask = (4096 >> 2) - 1, /* length mask in units of u32 */ |
| }; |
| |
| static struct platform_device msm_rpm_log_device = { |
| .name = "msm_rpm_log", |
| .id = -1, |
| .dev = { |
| .platform_data = &msm_rpm_log_pdata, |
| }, |
| }; |
| |
| static struct platform_device *common_devices[] __initdata = { |
| &msm8960_device_dmov, |
| &msm_device_smd, |
| &msm8960_device_uart_gsbi5, |
| &msm_device_uart_dm6, |
| &msm_device_saw_core0, |
| &msm_device_saw_core1, |
| &msm8960_device_ext_5v_vreg, |
| &msm8960_device_ssbi_pmic, |
| &msm8960_device_ext_otg_sw_vreg, |
| &msm8960_device_qup_spi_gsbi1, |
| &msm8960_device_qup_i2c_gsbi3, |
| &msm8960_device_qup_i2c_gsbi4, |
| &msm8960_device_qup_i2c_gsbi10, |
| #ifndef CONFIG_MSM_DSPS |
| &msm8960_device_qup_i2c_gsbi12, |
| #endif |
| &msm_slim_ctrl, |
| &msm_device_wcnss_wlan, |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| &qcrypto_device, |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| &qcedev_device, |
| #endif |
| #ifdef CONFIG_MSM_ROTATOR |
| &msm_rotator_device, |
| #endif |
| &msm_device_sps, |
| #ifdef CONFIG_MSM_FAKE_BATTERY |
| &fish_battery_device, |
| #endif |
| &fmem_device, |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| &android_pmem_device, |
| &android_pmem_adsp_device, |
| #endif |
| &android_pmem_audio_device, |
| #endif |
| &msm_device_vidc, |
| &msm_device_bam_dmux, |
| &msm_fm_platform_init, |
| |
| #ifdef CONFIG_HW_RANDOM_MSM |
| &msm_device_rng, |
| #endif |
| &msm_rpm_device, |
| #ifdef CONFIG_ION_MSM |
| &ion_dev, |
| #endif |
| &msm_rpm_log_device, |
| &msm_rpm_stat_device, |
| &msm_device_tz_log, |
| |
| #ifdef CONFIG_MSM_QDSS |
| &msm_etb_device, |
| &msm_tpiu_device, |
| &msm_funnel_device, |
| &msm_ptm_device, |
| #endif |
| &msm_device_dspcrashd_8960, |
| &msm8960_device_watchdog, |
| }; |
| |
| static struct platform_device *sim_devices[] __initdata = { |
| &msm8960_device_otg, |
| &msm8960_device_gadget_peripheral, |
| &msm_device_hsusb_host, |
| &msm_device_hsic_host, |
| &android_usb_device, |
| &msm_device_vidc, |
| &msm_bus_apps_fabric, |
| &msm_bus_sys_fabric, |
| &msm_bus_mm_fabric, |
| &msm_bus_sys_fpb, |
| &msm_bus_cpss_fpb, |
| &msm_pcm, |
| &msm_pcm_routing, |
| &msm_cpudai0, |
| &msm_cpudai1, |
| &msm_cpudai_hdmi_rx, |
| &msm_cpudai_bt_rx, |
| &msm_cpudai_bt_tx, |
| &msm_cpudai_fm_rx, |
| &msm_cpudai_fm_tx, |
| &msm_cpudai_auxpcm_rx, |
| &msm_cpudai_auxpcm_tx, |
| &msm_cpu_fe, |
| &msm_stub_codec, |
| &msm_voice, |
| &msm_voip, |
| &msm_lpa_pcm, |
| &msm_compr_dsp, |
| &msm_cpudai_incall_music_rx, |
| &msm_cpudai_incall_record_rx, |
| &msm_cpudai_incall_record_tx, |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| &qcrypto_device, |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| &qcedev_device, |
| #endif |
| }; |
| |
| static struct platform_device *rumi3_devices[] __initdata = { |
| &msm_kgsl_3d0, |
| &msm_kgsl_2d0, |
| &msm_kgsl_2d1, |
| #ifdef CONFIG_MSM_GEMINI |
| &msm8960_gemini_device, |
| #endif |
| }; |
| |
| static struct platform_device *cdp_devices[] __initdata = { |
| &msm_8960_q6_lpass, |
| &msm_8960_q6_mss_fw, |
| &msm_8960_q6_mss_sw, |
| &msm_8960_riva, |
| &msm_pil_tzapps, |
| &msm8960_device_otg, |
| &msm8960_device_gadget_peripheral, |
| &msm_device_hsusb_host, |
| &android_usb_device, |
| &msm_pcm, |
| &msm_pcm_routing, |
| &msm_cpudai0, |
| &msm_cpudai1, |
| &msm_cpudai_hdmi_rx, |
| &msm_cpudai_bt_rx, |
| &msm_cpudai_bt_tx, |
| &msm_cpudai_fm_rx, |
| &msm_cpudai_fm_tx, |
| &msm_cpudai_auxpcm_rx, |
| &msm_cpudai_auxpcm_tx, |
| &msm_cpu_fe, |
| &msm_stub_codec, |
| &msm_kgsl_3d0, |
| #ifdef CONFIG_MSM_KGSL_2D |
| &msm_kgsl_2d0, |
| &msm_kgsl_2d1, |
| #endif |
| #ifdef CONFIG_MSM_GEMINI |
| &msm8960_gemini_device, |
| #endif |
| &msm_voice, |
| &msm_voip, |
| &msm_lpa_pcm, |
| &msm_cpudai_afe_01_rx, |
| &msm_cpudai_afe_01_tx, |
| &msm_cpudai_afe_02_rx, |
| &msm_cpudai_afe_02_tx, |
| &msm_pcm_afe, |
| &msm_compr_dsp, |
| &msm_cpudai_incall_music_rx, |
| &msm_cpudai_incall_record_rx, |
| &msm_cpudai_incall_record_tx, |
| &msm_pcm_hostless, |
| &msm_bus_apps_fabric, |
| &msm_bus_sys_fabric, |
| &msm_bus_mm_fabric, |
| &msm_bus_sys_fpb, |
| &msm_bus_cpss_fpb, |
| &msm_tsens_device, |
| }; |
| |
| static void __init msm8960_i2c_init(void) |
| { |
| msm8960_device_qup_i2c_gsbi4.dev.platform_data = |
| &msm8960_i2c_qup_gsbi4_pdata; |
| |
| msm8960_device_qup_i2c_gsbi3.dev.platform_data = |
| &msm8960_i2c_qup_gsbi3_pdata; |
| |
| msm8960_device_qup_i2c_gsbi10.dev.platform_data = |
| &msm8960_i2c_qup_gsbi10_pdata; |
| |
| msm8960_device_qup_i2c_gsbi12.dev.platform_data = |
| &msm8960_i2c_qup_gsbi12_pdata; |
| } |
| |
| static void __init msm8960_gfx_init(void) |
| { |
| uint32_t soc_platform_version = socinfo_get_version(); |
| if (SOCINFO_VERSION_MAJOR(soc_platform_version) == 1) { |
| struct kgsl_device_platform_data *kgsl_3d0_pdata = |
| msm_kgsl_3d0.dev.platform_data; |
| kgsl_3d0_pdata->pwrlevel[0].gpu_freq = 320000000; |
| kgsl_3d0_pdata->pwrlevel[1].gpu_freq = 266667000; |
| } |
| } |
| |
| static struct msm_cpuidle_state msm_cstates[] __initdata = { |
| {0, 0, "C0", "WFI", |
| MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT}, |
| |
| {0, 1, "C1", "STANDALONE_POWER_COLLAPSE", |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE}, |
| |
| {0, 2, "C2", "POWER_COLLAPSE", |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE}, |
| |
| {1, 0, "C0", "WFI", |
| MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT}, |
| |
| {1, 1, "C1", "STANDALONE_POWER_COLLAPSE", |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE}, |
| }; |
| |
| static struct msm_pm_platform_data msm_pm_data[MSM_PM_SLEEP_MODE_NR * 2] = { |
| [MSM_PM_MODE(0, MSM_PM_SLEEP_MODE_POWER_COLLAPSE)] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 0, |
| .suspend_enabled = 0, |
| }, |
| |
| [MSM_PM_MODE(0, MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE)] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 0, |
| .suspend_enabled = 0, |
| }, |
| |
| [MSM_PM_MODE(0, MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT)] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 1, |
| .suspend_enabled = 1, |
| }, |
| |
| [MSM_PM_MODE(1, MSM_PM_SLEEP_MODE_POWER_COLLAPSE)] = { |
| .idle_supported = 0, |
| .suspend_supported = 1, |
| .idle_enabled = 0, |
| .suspend_enabled = 0, |
| }, |
| |
| [MSM_PM_MODE(1, MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE)] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 0, |
| .suspend_enabled = 0, |
| }, |
| |
| [MSM_PM_MODE(1, MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT)] = { |
| .idle_supported = 1, |
| .suspend_supported = 0, |
| .idle_enabled = 1, |
| .suspend_enabled = 0, |
| }, |
| }; |
| |
| static struct msm_rpmrs_level msm_rpmrs_levels[] __initdata = { |
| { |
| MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 100, 8000, 100000, 1, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 2000, 6000, 60100000, 3000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, GDHS, MAX, ACTIVE), |
| false, |
| 4200, 5000, 60350000, 3500, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, HSFS_OPEN, MAX, ACTIVE), |
| false, |
| 6300, 4500, 65350000, 4800, |
| }, |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, HSFS_OPEN, ACTIVE, RET_HIGH), |
| false, |
| 7000, 3500, 66600000, 5150, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, GDHS, MAX, ACTIVE), |
| false, |
| 11700, 2500, 67850000, 5500, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, MAX, ACTIVE), |
| false, |
| 13800, 2000, 71850000, 6800, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, ACTIVE, RET_HIGH), |
| false, |
| 29700, 500, 75850000, 8800, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, RET_HIGH, RET_LOW), |
| false, |
| 29700, 0, 76350000, 9800, |
| }, |
| }; |
| |
| static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = { |
| .mode = MSM_PM_BOOT_CONFIG_TZ, |
| }; |
| |
| #ifdef CONFIG_I2C |
| #define I2C_SURF 1 |
| #define I2C_FFA (1 << 1) |
| #define I2C_RUMI (1 << 2) |
| #define I2C_SIM (1 << 3) |
| #define I2C_FLUID (1 << 4) |
| #define I2C_LIQUID (1 << 5) |
| |
| struct i2c_registry { |
| u8 machs; |
| int bus; |
| struct i2c_board_info *info; |
| int len; |
| }; |
| |
| /* Sensors DSPS platform data */ |
| #ifdef CONFIG_MSM_DSPS |
| #define DSPS_PIL_GENERIC_NAME "dsps" |
| #endif /* CONFIG_MSM_DSPS */ |
| |
| static void __init msm8960_init_dsps(void) |
| { |
| #ifdef CONFIG_MSM_DSPS |
| struct msm_dsps_platform_data *pdata = |
| msm_dsps_device.dev.platform_data; |
| pdata->pil_name = DSPS_PIL_GENERIC_NAME; |
| pdata->gpios = NULL; |
| pdata->gpios_num = 0; |
| |
| platform_device_register(&msm_dsps_device); |
| #endif /* CONFIG_MSM_DSPS */ |
| } |
| |
| static int hsic_peripheral_status = 1; |
| static DEFINE_MUTEX(hsic_status_lock); |
| |
| void peripheral_connect() |
| { |
| mutex_lock(&hsic_status_lock); |
| if (hsic_peripheral_status) |
| goto out; |
| platform_device_add(&msm_device_hsic_host); |
| hsic_peripheral_status = 1; |
| out: |
| mutex_unlock(&hsic_status_lock); |
| } |
| EXPORT_SYMBOL(peripheral_connect); |
| |
| void peripheral_disconnect() |
| { |
| mutex_lock(&hsic_status_lock); |
| if (!hsic_peripheral_status) |
| goto out; |
| platform_device_del(&msm_device_hsic_host); |
| hsic_peripheral_status = 0; |
| out: |
| mutex_unlock(&hsic_status_lock); |
| } |
| EXPORT_SYMBOL(peripheral_disconnect); |
| |
| static void __init msm8960_init_hsic(void) |
| { |
| #ifdef CONFIG_USB_EHCI_MSM_HSIC |
| uint32_t version = socinfo_get_version(); |
| |
| if (SOCINFO_VERSION_MAJOR(version) == 1) |
| return; |
| |
| if (PLATFORM_IS_CHARM25() || machine_is_msm8960_liquid()) |
| platform_device_register(&msm_device_hsic_host); |
| #endif |
| } |
| |
| #ifdef CONFIG_ISL9519_CHARGER |
| static struct isl_platform_data isl_data __initdata = { |
| .valid_n_gpio = 0, /* Not required when notify-by-pmic */ |
| .chg_detection_config = NULL, /* Not required when notify-by-pmic */ |
| .max_system_voltage = 4200, |
| .min_system_voltage = 3200, |
| .chgcurrent = 1000, /* 1900, */ |
| .term_current = 400, /* Need fine tuning */ |
| .input_current = 2048, |
| }; |
| |
| static struct i2c_board_info isl_charger_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("isl9519q", 0x9), |
| .irq = 0, /* Not required when notify-by-pmic */ |
| .platform_data = &isl_data, |
| }, |
| }; |
| #endif /* CONFIG_ISL9519_CHARGER */ |
| |
| static struct i2c_board_info liquid_io_expander_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("sx1508q", 0x20), |
| .platform_data = &msm8960_sx150x_data[SX150X_LIQUID] |
| }, |
| }; |
| |
| static struct i2c_registry msm8960_i2c_devices[] __initdata = { |
| #ifdef CONFIG_ISL9519_CHARGER |
| { |
| I2C_LIQUID, |
| MSM_8960_GSBI10_QUP_I2C_BUS_ID, |
| isl_charger_i2c_info, |
| ARRAY_SIZE(isl_charger_i2c_info), |
| }, |
| #endif /* CONFIG_ISL9519_CHARGER */ |
| { |
| I2C_SURF | I2C_FFA | I2C_FLUID, |
| MSM_8960_GSBI3_QUP_I2C_BUS_ID, |
| cyttsp_info, |
| ARRAY_SIZE(cyttsp_info), |
| }, |
| { |
| I2C_LIQUID, |
| MSM_8960_GSBI3_QUP_I2C_BUS_ID, |
| mxt_device_info, |
| ARRAY_SIZE(mxt_device_info), |
| }, |
| { |
| I2C_FFA | I2C_LIQUID, |
| MSM_8960_GSBI10_QUP_I2C_BUS_ID, |
| sii_device_info, |
| ARRAY_SIZE(sii_device_info), |
| }, |
| { |
| I2C_LIQUID, |
| MSM_8960_GSBI10_QUP_I2C_BUS_ID, |
| msm_isa1200_board_info, |
| ARRAY_SIZE(msm_isa1200_board_info), |
| }, |
| { |
| I2C_LIQUID, |
| MSM_8960_GSBI10_QUP_I2C_BUS_ID, |
| liquid_io_expander_i2c_info, |
| ARRAY_SIZE(liquid_io_expander_i2c_info), |
| }, |
| }; |
| #endif /* CONFIG_I2C */ |
| |
| static void __init register_i2c_devices(void) |
| { |
| #ifdef CONFIG_I2C |
| u8 mach_mask = 0; |
| int i; |
| #ifdef CONFIG_MSM_CAMERA |
| struct i2c_registry msm8960_camera_i2c_devices = { |
| I2C_SURF | I2C_FFA | I2C_FLUID | I2C_LIQUID | I2C_RUMI, |
| MSM_8960_GSBI4_QUP_I2C_BUS_ID, |
| msm8960_camera_board_info.board_info, |
| msm8960_camera_board_info.num_i2c_board_info, |
| }; |
| #endif |
| |
| /* Build the matching 'supported_machs' bitmask */ |
| if (machine_is_msm8960_cdp()) |
| mach_mask = I2C_SURF; |
| else if (machine_is_msm8960_rumi3()) |
| mach_mask = I2C_RUMI; |
| else if (machine_is_msm8960_sim()) |
| mach_mask = I2C_SIM; |
| else if (machine_is_msm8960_fluid()) |
| mach_mask = I2C_FLUID; |
| else if (machine_is_msm8960_liquid()) |
| mach_mask = I2C_LIQUID; |
| else if (machine_is_msm8960_mtp()) |
| mach_mask = I2C_FFA; |
| else |
| pr_err("unmatched machine ID in register_i2c_devices\n"); |
| |
| /* Run the array and install devices as appropriate */ |
| for (i = 0; i < ARRAY_SIZE(msm8960_i2c_devices); ++i) { |
| if (msm8960_i2c_devices[i].machs & mach_mask) |
| i2c_register_board_info(msm8960_i2c_devices[i].bus, |
| msm8960_i2c_devices[i].info, |
| msm8960_i2c_devices[i].len); |
| } |
| #ifdef CONFIG_MSM_CAMERA |
| if (msm8960_camera_i2c_devices.machs & mach_mask) |
| i2c_register_board_info(msm8960_camera_i2c_devices.bus, |
| msm8960_camera_i2c_devices.info, |
| msm8960_camera_i2c_devices.len); |
| #endif |
| #endif |
| } |
| |
| static void __init msm8960_sim_init(void) |
| { |
| struct msm_watchdog_pdata *wdog_pdata = (struct msm_watchdog_pdata *) |
| &msm8960_device_watchdog.dev.platform_data; |
| |
| wdog_pdata->bark_time = 15000; |
| BUG_ON(msm_rpm_init(&msm_rpm_data)); |
| BUG_ON(msm_rpmrs_levels_init(msm_rpmrs_levels, |
| ARRAY_SIZE(msm_rpmrs_levels))); |
| regulator_suppress_info_printing(); |
| platform_device_register(&msm8960_device_rpm_regulator); |
| msm_clock_init(&msm8960_clock_init_data); |
| msm8960_init_pmic(); |
| |
| msm8960_device_otg.dev.platform_data = &msm_otg_pdata; |
| msm8960_init_gpiomux(); |
| msm8960_i2c_init(); |
| msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data)); |
| msm_spm_l2_init(msm_spm_l2_data); |
| msm8960_init_buses(); |
| platform_add_devices(common_devices, ARRAY_SIZE(common_devices)); |
| msm8960_pm8921_gpio_mpp_init(); |
| platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices)); |
| acpuclk_init(&acpuclk_8960_soc_data); |
| |
| msm8960_device_qup_spi_gsbi1.dev.platform_data = |
| &msm8960_qup_spi_gsbi1_pdata; |
| spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); |
| |
| msm8960_init_mmc(); |
| msm8960_init_fb(); |
| slim_register_board_info(msm_slim_devices, |
| ARRAY_SIZE(msm_slim_devices)); |
| msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data)); |
| msm_pm_set_rpm_wakeup_irq(RPM_APCC_CPU0_WAKE_UP_IRQ); |
| msm_cpuidle_set_states(msm_cstates, ARRAY_SIZE(msm_cstates), |
| msm_pm_data); |
| BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata)); |
| msm_pm_init_sleep_status_data(&msm_pm_slp_sts_data); |
| } |
| |
| static void __init msm8960_rumi3_init(void) |
| { |
| BUG_ON(msm_rpm_init(&msm_rpm_data)); |
| BUG_ON(msm_rpmrs_levels_init(msm_rpmrs_levels, |
| ARRAY_SIZE(msm_rpmrs_levels))); |
| regulator_suppress_info_printing(); |
| platform_device_register(&msm8960_device_rpm_regulator); |
| msm_clock_init(&msm8960_dummy_clock_init_data); |
| msm8960_init_gpiomux(); |
| msm8960_init_pmic(); |
| msm8960_device_qup_spi_gsbi1.dev.platform_data = |
| &msm8960_qup_spi_gsbi1_pdata; |
| spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); |
| msm8960_i2c_init(); |
| msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data)); |
| msm_spm_l2_init(msm_spm_l2_data); |
| platform_add_devices(common_devices, ARRAY_SIZE(common_devices)); |
| msm8960_pm8921_gpio_mpp_init(); |
| platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices)); |
| msm8960_init_mmc(); |
| register_i2c_devices(); |
| msm8960_init_fb(); |
| slim_register_board_info(msm_slim_devices, |
| ARRAY_SIZE(msm_slim_devices)); |
| msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data)); |
| msm_pm_set_rpm_wakeup_irq(RPM_APCC_CPU0_WAKE_UP_IRQ); |
| msm_cpuidle_set_states(msm_cstates, ARRAY_SIZE(msm_cstates), |
| msm_pm_data); |
| BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata)); |
| msm_pm_init_sleep_status_data(&msm_pm_slp_sts_data); |
| } |
| |
| static void __init msm8960_cdp_init(void) |
| { |
| if (meminfo_init(SYS_MEMORY, SZ_256M) < 0) |
| pr_err("meminfo_init() failed!\n"); |
| |
| BUG_ON(msm_rpm_init(&msm_rpm_data)); |
| BUG_ON(msm_rpmrs_levels_init(msm_rpmrs_levels, |
| ARRAY_SIZE(msm_rpmrs_levels))); |
| |
| regulator_suppress_info_printing(); |
| if (msm_xo_init()) |
| pr_err("Failed to initialize XO votes\n"); |
| platform_device_register(&msm8960_device_rpm_regulator); |
| msm_clock_init(&msm8960_clock_init_data); |
| if (machine_is_msm8960_liquid()) |
| msm_otg_pdata.mhl_enable = true; |
| msm8960_device_otg.dev.platform_data = &msm_otg_pdata; |
| if (machine_is_msm8960_mtp() || machine_is_msm8960_fluid() || |
| machine_is_msm8960_cdp()) { |
| msm_otg_pdata.phy_init_seq = wr_phy_init_seq; |
| } else if (machine_is_msm8960_liquid()) { |
| msm_otg_pdata.phy_init_seq = |
| liquid_v1_phy_init_seq; |
| } |
| msm_otg_pdata.swfi_latency = |
| msm_rpmrs_levels[0].latency_us; |
| #ifdef CONFIG_USB_EHCI_MSM_HSIC |
| if (machine_is_msm8960_liquid()) { |
| if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) >= 2) |
| msm_hsic_pdata.hub_reset = HSIC_HUB_RESET_GPIO; |
| } |
| #endif |
| msm_device_hsic_host.dev.platform_data = &msm_hsic_pdata; |
| msm8960_init_gpiomux(); |
| msm8960_device_qup_spi_gsbi1.dev.platform_data = |
| &msm8960_qup_spi_gsbi1_pdata; |
| spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); |
| |
| msm8960_init_pmic(); |
| if ((SOCINFO_VERSION_MAJOR(socinfo_get_version()) >= 2 && |
| (machine_is_msm8960_mtp())) || machine_is_msm8960_liquid()) |
| msm_isa1200_board_info[0].platform_data = &isa1200_1_pdata; |
| msm8960_i2c_init(); |
| msm8960_gfx_init(); |
| msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data)); |
| msm_spm_l2_init(msm_spm_l2_data); |
| msm8960_init_buses(); |
| platform_add_devices(msm_footswitch_devices, |
| msm_num_footswitch_devices); |
| if (machine_is_msm8960_liquid()) |
| platform_device_register(&msm8960_device_ext_3p3v_vreg); |
| if (machine_is_msm8960_cdp()) |
| platform_device_register(&msm8960_device_ext_l2_vreg); |
| platform_add_devices(common_devices, ARRAY_SIZE(common_devices)); |
| msm8960_pm8921_gpio_mpp_init(); |
| platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices)); |
| msm8960_init_hsic(); |
| msm8960_init_cam(); |
| msm8960_init_mmc(); |
| acpuclk_init(&acpuclk_8960_soc_data); |
| if (machine_is_msm8960_liquid()) |
| mxt_init_hw_liquid(); |
| register_i2c_devices(); |
| msm8960_init_fb(); |
| slim_register_board_info(msm_slim_devices, |
| ARRAY_SIZE(msm_slim_devices)); |
| msm8960_init_dsps(); |
| msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data)); |
| msm_pm_set_rpm_wakeup_irq(RPM_APCC_CPU0_WAKE_UP_IRQ); |
| msm_cpuidle_set_states(msm_cstates, ARRAY_SIZE(msm_cstates), |
| msm_pm_data); |
| change_memory_power = &msm8960_change_memory_power; |
| BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata)); |
| msm_pm_init_sleep_status_data(&msm_pm_slp_sts_data); |
| if (PLATFORM_IS_CHARM25()) |
| platform_add_devices(mdm_devices, ARRAY_SIZE(mdm_devices)); |
| } |
| |
| MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") |
| .map_io = msm8960_map_io, |
| .reserve = msm8960_reserve, |
| .init_irq = msm8960_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8960_sim_init, |
| .init_early = msm8960_allocate_memory_regions, |
| .init_very_early = msm8960_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") |
| .map_io = msm8960_map_io, |
| .reserve = msm8960_reserve, |
| .init_irq = msm8960_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8960_rumi3_init, |
| .init_early = msm8960_allocate_memory_regions, |
| .init_very_early = msm8960_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8960_CDP, "QCT MSM8960 CDP") |
| .map_io = msm8960_map_io, |
| .reserve = msm8960_reserve, |
| .init_irq = msm8960_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8960_cdp_init, |
| .init_early = msm8960_allocate_memory_regions, |
| .init_very_early = msm8960_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8960_MTP, "QCT MSM8960 MTP") |
| .map_io = msm8960_map_io, |
| .reserve = msm8960_reserve, |
| .init_irq = msm8960_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8960_cdp_init, |
| .init_early = msm8960_allocate_memory_regions, |
| .init_very_early = msm8960_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8960_FLUID, "QCT MSM8960 FLUID") |
| .map_io = msm8960_map_io, |
| .reserve = msm8960_reserve, |
| .init_irq = msm8960_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8960_cdp_init, |
| .init_early = msm8960_allocate_memory_regions, |
| .init_very_early = msm8960_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8960_LIQUID, "QCT MSM8960 LIQUID") |
| .map_io = msm8960_map_io, |
| .reserve = msm8960_reserve, |
| .init_irq = msm8960_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8960_cdp_init, |
| .init_early = msm8960_allocate_memory_regions, |
| .init_very_early = msm8960_early_memory, |
| MACHINE_END |