arch/arm/mach-msm/platsmp-8625.c - kernel/msm - Gitiles

 /* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>

 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_scu.h>
 #include <asm/unified.h>
 #include <mach/msm_iomap.h>
 #include "pm.h"

 #define MSM_CORE1_RESET		0xA8600590
 #define MSM_CORE1_STATUS_MSK	0x02800000

 /*
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
 int pen_release = -1;

 static bool cold_boot_done;

 static uint32_t *msm8625_boot_vector;
 static void __iomem *reset_core1_base;

 /*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
  */
 static void __cpuinit write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();
 	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
 	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
 }

 static void __iomem *scu_base_addr(void)
 {
 	return MSM_SCU_BASE;
 }

 static DEFINE_SPINLOCK(boot_lock);

 /*
  * MP_CORE_IPC will be used to generate interrupt and can be used by either
  * of core.
  * To bring core1 out of GDFS we need to raise the SPI using the MP_CORE_IPC.
  */
 static void raise_clear_spi(unsigned int cpu, bool set)
 {
 	int value;

 	value = __raw_readl(MSM_CSR_BASE + 0x54);
 	if (set)
 		__raw_writel(value | BIT(cpu), MSM_CSR_BASE + 0x54);
 	else
 		__raw_writel(value & ~BIT(cpu), MSM_CSR_BASE + 0x54);
 	mb();
 }

 static void clear_pending_spi(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	struct irq_chip *c = irq_data_get_irq_chip(d);

 	c->irq_mask(d);
 	local_irq_disable();
 	/* Clear the IRQ from the ENABLE_SET */
 	gic_clear_irq_pending(irq);
 	local_irq_enable();
 }

 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	pr_debug("CPU%u: Booted secondary processor\n", cpu);

 	WARN_ON(msm_platform_secondary_init(cpu));

 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
 	gic_secondary_init(0);

 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
 	write_pen_release(-1);

 	/* clear the IPC1(SPI-8) pending SPI */
 	if (power_collapsed) {
 		raise_clear_spi(1, false);
 		clear_pending_spi(MSM8625_INT_ACSR_MP_CORE_IPC1);
 		power_collapsed = 0;
 	}

 	/*
 	 * Synchronise with the boot thread.
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
 }

 static int  __cpuinit msm8625_release_secondary(void)
 {
 	void __iomem *base_ptr;
 	int value = 0;
 	unsigned long timeout;

 	/*
 	 * loop to ensure that the GHS_STATUS_CORE1 bit in the
 	 * MPA5_STATUS_REG(0x3c) is set. The timeout for the while
 	 * loop can be set as 20us as of now
 	 */
 	timeout = jiffies + usecs_to_jiffies(20);
 	while (time_before(jiffies, timeout)) {
 		value = __raw_readl(MSM_CFG_CTL_BASE + 0x3c);
 		if ((value & MSM_CORE1_STATUS_MSK) ==
 				MSM_CORE1_STATUS_MSK)
 			break;
 			udelay(1);
 	}

 	if (!value) {
 		pr_err("Core 1 cannot be brought out of Reset!!!\n");
 		return -ENODEV;
 	}

 	base_ptr = ioremap_nocache(MSM_CORE1_RESET, SZ_4);
 	if (!base_ptr)
 		return -ENODEV;
 	/* Reset core 1 out of reset */
 	__raw_writel(0x0, base_ptr);
 	mb();

 	reset_core1_base = base_ptr;

 	return 0;
 }

 void __iomem *core1_reset_base(void)
 {
 	return reset_core1_base;
 }

 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;

 	preset_lpj = loops_per_jiffy;

 	if (cold_boot_done == false) {
 		if (msm8625_release_secondary()) {
 			pr_err("Failed to release secondary core\n");
 			return -ENODEV;
 		}
 		cold_boot_done = true;
 	}

 	/*
 	 * Set synchronisation state between this boot processor
 	 * and the secondary one
 	 */
 	spin_lock(&boot_lock);

 	/*
 	 * This is really belt and braces; we hold unintended secondary
 	 * CPUs in the holding pen until we're ready for them.  However,
 	 * since we haven't sent them a soft interrupt, they shouldn't
 	 * be there.
 	 */
 	write_pen_release(cpu);

 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 *
 	 * power_collapsed is the flag which will be updated for Powercollapse.
 	 * Once we are out of PC, as Core1 will be in the state of GDFS which
 	 * needs to be brought out by raising an SPI.
 	 */

 	if (power_collapsed) {
 		core1_gic_configure_and_raise();
 		raise_clear_spi(1, true);
 	} else {
 		gic_raise_softirq(cpumask_of(cpu), 1);
 	}

 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
 		smp_rmb();
 		if (pen_release == -1)
 			break;

 		udelay(10);
 	}

 	/*
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
 	 */
 	spin_unlock(&boot_lock);

 	return 0;
 }

 /*
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
 void __init smp_init_cpus(void)
 {
 	void __iomem *scu_base = scu_base_addr();

 	unsigned int i, ncores;

 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;

 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);

 	set_smp_cross_call(gic_raise_softirq);
 }

 static void __init msm8625_boot_vector_init(uint32_t *boot_vector,
 		unsigned long entry)
 {
 	if (!boot_vector)
 		return;
 	msm8625_boot_vector = boot_vector;

 	msm8625_boot_vector[0] = 0xE51FF004; /* ldr pc, 4 */
 	msm8625_boot_vector[1] = entry;
 }

 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i, value;
 	void __iomem *second_ptr;

 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);

 	scu_enable(scu_base_addr());

 	/*
 	 * Write the address of secondary startup into the
 	 * boot remapper register. The secondary CPU branches to this address.
 	 */
 	__raw_writel(MSM8625_SECONDARY_PHYS, (MSM_CFG_CTL_BASE + 0x34));
 	mb();

 	second_ptr = ioremap_nocache(MSM8625_SECONDARY_PHYS, SZ_8);
 	if (!second_ptr) {
 		pr_err("failed to ioremap for secondary core\n");
 		return;
 	}

 	msm8625_boot_vector_init(second_ptr,
 			virt_to_phys(msm_secondary_startup));
 	iounmap(second_ptr);

 	/* Enable boot remapper address: bit 26 for core1 */
 	value = __raw_readl(MSM_CFG_CTL_BASE + 0x30);
 	__raw_writel(value | (0x4 << 24), MSM_CFG_CTL_BASE + 0x30) ;
 	mb();
 }
	/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/init.h>
	#include <linux/errno.h>
	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/jiffies.h>
	#include <linux/smp.h>
	#include <linux/io.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>

	#include <asm/cacheflush.h>
	#include <asm/hardware/gic.h>
	#include <asm/hardware/cache-l2x0.h>
	#include <asm/smp_scu.h>
	#include <asm/unified.h>
	#include <mach/msm_iomap.h>
	#include "pm.h"

	#define MSM_CORE1_RESET 0xA8600590
	#define MSM_CORE1_STATUS_MSK 0x02800000

	/*
	* control for which core is the next to come out of the secondary
	* boot "holding pen"
	*/
	int pen_release = -1;

	static bool cold_boot_done;

	static uint32_t *msm8625_boot_vector;
	static void __iomem *reset_core1_base;

	/*
	* Write pen_release in a way that is guaranteed to be visible to all
	* observers, irrespective of whether they're taking part in coherency
	* or not. This is necessary for the hotplug code to work reliably.
	*/
	static void __cpuinit write_pen_release(int val)
	{
	pen_release = val;
	smp_wmb();
	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
	}

	static void __iomem *scu_base_addr(void)
	{
	return MSM_SCU_BASE;
	}

	static DEFINE_SPINLOCK(boot_lock);

	/*
	* MP_CORE_IPC will be used to generate interrupt and can be used by either
	* of core.
	* To bring core1 out of GDFS we need to raise the SPI using the MP_CORE_IPC.
	*/
	static void raise_clear_spi(unsigned int cpu, bool set)
	{
	int value;

	value = __raw_readl(MSM_CSR_BASE + 0x54);
	if (set)
	__raw_writel(value \| BIT(cpu), MSM_CSR_BASE + 0x54);
	else
	__raw_writel(value & ~BIT(cpu), MSM_CSR_BASE + 0x54);
	mb();
	}

	static void clear_pending_spi(unsigned int irq)
	{
	struct irq_data *d = irq_get_irq_data(irq);
	struct irq_chip *c = irq_data_get_irq_chip(d);

	c->irq_mask(d);
	local_irq_disable();
	/* Clear the IRQ from the ENABLE_SET */
	gic_clear_irq_pending(irq);
	local_irq_enable();
	}

	void __cpuinit platform_secondary_init(unsigned int cpu)
	{
	pr_debug("CPU%u: Booted secondary processor\n", cpu);

	WARN_ON(msm_platform_secondary_init(cpu));

	/*
	* if any interrupts are already enabled for the primary
	* core (e.g. timer irq), then they will not have been enabled
	* for us: do so
	*/
	gic_secondary_init(0);

	/*
	* let the primary processor know we're out of the
	* pen, then head off into the C entry point
	*/
	write_pen_release(-1);

	/* clear the IPC1(SPI-8) pending SPI */
	if (power_collapsed) {
	raise_clear_spi(1, false);
	clear_pending_spi(MSM8625_INT_ACSR_MP_CORE_IPC1);
	power_collapsed = 0;
	}

	/*
	* Synchronise with the boot thread.
	*/
	spin_lock(&boot_lock);
	spin_unlock(&boot_lock);
	}

	static int __cpuinit msm8625_release_secondary(void)
	{
	void __iomem *base_ptr;
	int value = 0;
	unsigned long timeout;

	/*
	* loop to ensure that the GHS_STATUS_CORE1 bit in the
	* MPA5_STATUS_REG(0x3c) is set. The timeout for the while
	* loop can be set as 20us as of now
	*/
	timeout = jiffies + usecs_to_jiffies(20);
	while (time_before(jiffies, timeout)) {
	value = __raw_readl(MSM_CFG_CTL_BASE + 0x3c);
	if ((value & MSM_CORE1_STATUS_MSK) ==
	MSM_CORE1_STATUS_MSK)
	break;
	udelay(1);
	}

	if (!value) {
	pr_err("Core 1 cannot be brought out of Reset!!!\n");
	return -ENODEV;
	}

	base_ptr = ioremap_nocache(MSM_CORE1_RESET, SZ_4);
	if (!base_ptr)
	return -ENODEV;
	/* Reset core 1 out of reset */
	__raw_writel(0x0, base_ptr);
	mb();

	reset_core1_base = base_ptr;

	return 0;
	}

	void __iomem *core1_reset_base(void)
	{
	return reset_core1_base;
	}

	int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
	{
	unsigned long timeout;

	preset_lpj = loops_per_jiffy;

	if (cold_boot_done == false) {
	if (msm8625_release_secondary()) {
	pr_err("Failed to release secondary core\n");
	return -ENODEV;
	}
	cold_boot_done = true;
	}

	/*
	* Set synchronisation state between this boot processor
	* and the secondary one
	*/
	spin_lock(&boot_lock);

	/*
	* This is really belt and braces; we hold unintended secondary
	* CPUs in the holding pen until we're ready for them. However,
	* since we haven't sent them a soft interrupt, they shouldn't
	* be there.
	*/
	write_pen_release(cpu);

	/*
	* Send the secondary CPU a soft interrupt, thereby causing
	* the boot monitor to read the system wide flags register,
	* and branch to the address found there.
	*
	* power_collapsed is the flag which will be updated for Powercollapse.
	* Once we are out of PC, as Core1 will be in the state of GDFS which
	* needs to be brought out by raising an SPI.
	*/

	if (power_collapsed) {
	core1_gic_configure_and_raise();
	raise_clear_spi(1, true);
	} else {
	gic_raise_softirq(cpumask_of(cpu), 1);
	}

	timeout = jiffies + (1 * HZ);
	while (time_before(jiffies, timeout)) {
	smp_rmb();
	if (pen_release == -1)
	break;

	udelay(10);
	}

	/*
	* now the secondary core is starting up let it run its
	* calibrations, then wait for it to finish
	*/
	spin_unlock(&boot_lock);

	return 0;
	}

	/*
	* Initialise the CPU possible map early - this describes the CPUs
	* which may be present or become present in the system.
	*/
	void __init smp_init_cpus(void)
	{
	void __iomem *scu_base = scu_base_addr();

	unsigned int i, ncores;

	ncores = scu_base ? scu_get_core_count(scu_base) : 1;

	for (i = 0; i < ncores; i++)
	set_cpu_possible(i, true);

	set_smp_cross_call(gic_raise_softirq);
	}

	static void __init msm8625_boot_vector_init(uint32_t *boot_vector,
	unsigned long entry)
	{
	if (!boot_vector)
	return;
	msm8625_boot_vector = boot_vector;

	msm8625_boot_vector[0] = 0xE51FF004; /* ldr pc, 4 */
	msm8625_boot_vector[1] = entry;
	}

	void __init platform_smp_prepare_cpus(unsigned int max_cpus)
	{
	int i, value;
	void __iomem *second_ptr;

	/*
	* Initialise the present map, which describes the set of CPUs
	* actually populated at the present time.
	*/
	for (i = 0; i < max_cpus; i++)
	set_cpu_present(i, true);

	scu_enable(scu_base_addr());

	/*
	* Write the address of secondary startup into the
	* boot remapper register. The secondary CPU branches to this address.
	*/
	__raw_writel(MSM8625_SECONDARY_PHYS, (MSM_CFG_CTL_BASE + 0x34));
	mb();

	second_ptr = ioremap_nocache(MSM8625_SECONDARY_PHYS, SZ_8);
	if (!second_ptr) {
	pr_err("failed to ioremap for secondary core\n");
	return;
	}

	msm8625_boot_vector_init(second_ptr,
	virt_to_phys(msm_secondary_startup));
	iounmap(second_ptr);

	/* Enable boot remapper address: bit 26 for core1 */
	value = __raw_readl(MSM_CFG_CTL_BASE + 0x30);
	__raw_writel(value \| (0x4 << 24), MSM_CFG_CTL_BASE + 0x30) ;
	mb();
	}