Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Put the space for cpu0 per-cpu area into .data section
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index f87fe7b..c6e11eb 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -133,61 +133,61 @@
reg = <0x00007400 0x00000400>;
big-endian;
};
+ };
- pci@1000 {
- device_type = "pci";
- compatible = "tsi109-pci", "tsi108-pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0x00001000 0x00001000>;
- bus-range = <0x0 0x0>;
- /*----------------------------------------------------+
- | PCI memory range.
- | 01 denotes I/O space
- | 02 denotes 32-bit memory space
- +----------------------------------------------------*/
- ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
- 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
- clock-frequency = <133333332>;
- interrupt-parent = <&MPIC>;
+ pci@c0001000 {
+ device_type = "pci";
+ compatible = "tsi109-pci", "tsi108-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xc0001000 0x00001000>;
+ bus-range = <0x0 0x0>;
+ /*----------------------------------------------------+
+ | PCI memory range.
+ | 01 denotes I/O space
+ | 02 denotes 32-bit memory space
+ +----------------------------------------------------*/
+ ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+ 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+ clock-frequency = <133333332>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x17 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ /*----------------------------------------------------+
+ | The INTA, INTB, INTC, INTD are shared.
+ +----------------------------------------------------*/
+ interrupt-map = <
+ 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+ 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+ 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+ 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+ 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+ 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+ 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+ 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+ 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+ 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+ 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+ 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+ 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+ 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+ 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+ 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+ >;
+
+ RT0: router@1180 {
+ device_type = "pic-router";
+ interrupt-controller;
+ big-endian;
+ clock-frequency = <0>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
interrupts = <0x17 0x2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- /*----------------------------------------------------+
- | The INTA, INTB, INTC, INTD are shared.
- +----------------------------------------------------*/
- interrupt-map = <
- 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
- 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
- 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
- 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
-
- 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
- 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
- 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
- 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
-
- 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
- 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
- 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
- 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
-
- 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
- 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
- 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
- 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
- >;
-
- RT0: router@1180 {
- device_type = "pic-router";
- interrupt-controller;
- big-endian;
- clock-frequency = <0>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupts = <0x17 0x2>;
- interrupt-parent = <&MPIC>;
- };
+ interrupt-parent = <&MPIC>;
};
};
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index d308a9f..31982d0 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -34,11 +34,7 @@
#include <asm/smp.h>
#ifdef CONFIG_HOTPLUG_CPU
-/* this is used for software suspend, and that shuts down
- * CPUs even while the system is still booting... */
-#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
- (system_state == SYSTEM_RUNNING \
- || system_state == SYSTEM_BOOTING))
+#define cpu_should_die() cpu_is_offline(smp_processor_id())
#else
#define cpu_should_die() 0
#endif
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 10c44d3..68dc8d9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -21,7 +21,7 @@
config MFD_SM501_GPIO
bool "Export GPIO via GPIO layer"
- depends on MFD_SM501 && HAVE_GPIO_LIB
+ depends on MFD_SM501 && GPIOLIB
---help---
This option uses the gpio library layer to export the 64 GPIO
lines on the SM501. The platform data is used to supply the
@@ -29,7 +29,7 @@
config MFD_ASIC3
bool "Support for Compaq ASIC3"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index bc2a807..ba5aa20 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -312,7 +312,6 @@
struct asic3 *asic = platform_get_drvdata(pdev);
unsigned long clksel = 0;
unsigned int irq, irq_base;
- int map_size;
int ret;
ret = platform_get_irq(pdev, 0);
@@ -534,6 +533,7 @@
struct asic3 *asic;
struct resource *mem;
unsigned long clksel;
+ int map_size;
int ret = 0;
asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 6d93dce..2f245fe 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -47,14 +47,22 @@
* HRTIMER_CB_IRQSAFE: Callback may run in hardirq context
* HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and
* does not restart the timer
- * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ: Callback must run in hardirq context
- * Special mode for tick emultation
+ * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context
+ * Special mode for tick emulation and
+ * scheduler timer. Such timers are per
+ * cpu and not allowed to be migrated on
+ * cpu unplug.
+ * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context
+ * with timer->base lock unlocked
+ * used for timers which call wakeup to
+ * avoid lock order problems with rq->lock
*/
enum hrtimer_cb_mode {
HRTIMER_CB_SOFTIRQ,
HRTIMER_CB_IRQSAFE,
HRTIMER_CB_IRQSAFE_NO_RESTART,
- HRTIMER_CB_IRQSAFE_NO_SOFTIRQ,
+ HRTIMER_CB_IRQSAFE_PERCPU,
+ HRTIMER_CB_IRQSAFE_UNLOCKED,
};
/*
@@ -67,9 +75,10 @@
* 0x02 callback function running
* 0x04 callback pending (high resolution mode)
*
- * Special case:
+ * Special cases:
* 0x03 callback function running and enqueued
* (was requeued on another CPU)
+ * 0x09 timer was migrated on CPU hotunplug
* The "callback function running and enqueued" status is only possible on
* SMP. It happens for example when a posix timer expired and the callback
* queued a signal. Between dropping the lock which protects the posix timer
@@ -87,6 +96,7 @@
#define HRTIMER_STATE_ENQUEUED 0x01
#define HRTIMER_STATE_CALLBACK 0x02
#define HRTIMER_STATE_PENDING 0x04
+#define HRTIMER_STATE_MIGRATE 0x08
/**
* struct hrtimer - the basic hrtimer structure
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b8e4dce..cdec83e 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -672,13 +672,14 @@
*/
BUG_ON(timer->function(timer) != HRTIMER_NORESTART);
return 1;
- case HRTIMER_CB_IRQSAFE_NO_SOFTIRQ:
+ case HRTIMER_CB_IRQSAFE_PERCPU:
+ case HRTIMER_CB_IRQSAFE_UNLOCKED:
/*
* This is solely for the sched tick emulation with
* dynamic tick support to ensure that we do not
* restart the tick right on the edge and end up with
* the tick timer in the softirq ! The calling site
- * takes care of this.
+ * takes care of this. Also used for hrtimer sleeper !
*/
debug_hrtimer_deactivate(timer);
return 1;
@@ -1245,7 +1246,8 @@
timer_stats_account_hrtimer(timer);
fn = timer->function;
- if (timer->cb_mode == HRTIMER_CB_IRQSAFE_NO_SOFTIRQ) {
+ if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU ||
+ timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) {
/*
* Used for scheduler timers, avoid lock inversion with
* rq->lock and tasklist_lock.
@@ -1452,7 +1454,7 @@
sl->timer.function = hrtimer_wakeup;
sl->task = task;
#ifdef CONFIG_HIGH_RES_TIMERS
- sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
#endif
}
@@ -1591,29 +1593,95 @@
#ifdef CONFIG_HOTPLUG_CPU
-static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
- struct hrtimer_clock_base *new_base)
+static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
+ struct hrtimer_clock_base *new_base, int dcpu)
{
struct hrtimer *timer;
struct rb_node *node;
+ int raise = 0;
while ((node = rb_first(&old_base->active))) {
timer = rb_entry(node, struct hrtimer, node);
BUG_ON(hrtimer_callback_running(timer));
debug_hrtimer_deactivate(timer);
- __remove_hrtimer(timer, old_base, HRTIMER_STATE_INACTIVE, 0);
+
+ /*
+ * Should not happen. Per CPU timers should be
+ * canceled _before_ the migration code is called
+ */
+ if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) {
+ __remove_hrtimer(timer, old_base,
+ HRTIMER_STATE_INACTIVE, 0);
+ WARN(1, "hrtimer (%p %p)active but cpu %d dead\n",
+ timer, timer->function, dcpu);
+ continue;
+ }
+
+ /*
+ * Mark it as STATE_MIGRATE not INACTIVE otherwise the
+ * timer could be seen as !active and just vanish away
+ * under us on another CPU
+ */
+ __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
timer->base = new_base;
/*
* Enqueue the timer. Allow reprogramming of the event device
*/
enqueue_hrtimer(timer, new_base, 1);
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+ /*
+ * Happens with high res enabled when the timer was
+ * already expired and the callback mode is
+ * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The
+ * enqueue code does not move them to the soft irq
+ * pending list for performance/latency reasons, but
+ * in the migration state, we need to do that
+ * otherwise we end up with a stale timer.
+ */
+ if (timer->state == HRTIMER_STATE_MIGRATE) {
+ timer->state = HRTIMER_STATE_PENDING;
+ list_add_tail(&timer->cb_entry,
+ &new_base->cpu_base->cb_pending);
+ raise = 1;
+ }
+#endif
+ /* Clear the migration state bit */
+ timer->state &= ~HRTIMER_STATE_MIGRATE;
}
+ return raise;
}
+#ifdef CONFIG_HIGH_RES_TIMERS
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+ struct hrtimer_cpu_base *new_base)
+{
+ struct hrtimer *timer;
+ int raise = 0;
+
+ while (!list_empty(&old_base->cb_pending)) {
+ timer = list_entry(old_base->cb_pending.next,
+ struct hrtimer, cb_entry);
+
+ __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0);
+ timer->base = &new_base->clock_base[timer->base->index];
+ list_add_tail(&timer->cb_entry, &new_base->cb_pending);
+ raise = 1;
+ }
+ return raise;
+}
+#else
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+ struct hrtimer_cpu_base *new_base)
+{
+ return 0;
+}
+#endif
+
static void migrate_hrtimers(int cpu)
{
struct hrtimer_cpu_base *old_base, *new_base;
- int i;
+ int i, raise = 0;
BUG_ON(cpu_online(cpu));
old_base = &per_cpu(hrtimer_bases, cpu);
@@ -1626,14 +1694,21 @@
spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
- migrate_hrtimer_list(&old_base->clock_base[i],
- &new_base->clock_base[i]);
+ if (migrate_hrtimer_list(&old_base->clock_base[i],
+ &new_base->clock_base[i], cpu))
+ raise = 1;
}
+ if (migrate_hrtimer_pending(old_base, new_base))
+ raise = 1;
+
spin_unlock(&old_base->lock);
spin_unlock(&new_base->lock);
local_irq_enable();
put_cpu_var(hrtimer_bases);
+
+ if (raise)
+ hrtimer_raise_softirq();
}
#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/kernel/sched.c b/kernel/sched.c
index 13dd2db..ad1962d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -201,7 +201,7 @@
hrtimer_init(&rt_b->rt_period_timer,
CLOCK_MONOTONIC, HRTIMER_MODE_REL);
rt_b->rt_period_timer.function = sched_rt_period_timer;
- rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
}
static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
@@ -1119,7 +1119,7 @@
hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
rq->hrtick_timer.function = hrtick;
- rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
}
#else
static inline void hrtick_clear(struct rq *rq)
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 39019b3f..cb02324 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -625,7 +625,7 @@
*/
hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ts->sched_timer.function = tick_sched_timer;
- ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
/* Get the next period (per cpu) */
ts->sched_timer.expires = tick_init_jiffy_update();
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index bb948e5..db58fb6 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -202,7 +202,7 @@
hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hrtimer->function = stack_trace_timer_fn;
- hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index ad994fc..f3da621 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1683,8 +1683,8 @@
/* Dell 3 stack systems with verb table in BIOS */
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS),
- SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS),
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index d68650d..0bbd945 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -681,7 +681,7 @@
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to create PCMs\n");
- return ret;
+ goto error_free_codec;
}
#ifdef USE_I2C
@@ -690,8 +690,7 @@
ret = i2c_add_driver(&cs4270_i2c_driver);
if (ret) {
printk(KERN_ERR "cs4270: failed to attach driver");
- snd_soc_free_pcms(socdev);
- return ret;
+ goto error_free_pcms;
}
/* Did we find a CS4270 on the I2C bus? */
@@ -713,10 +712,23 @@
ret = snd_soc_register_card(socdev);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to register card\n");
- snd_soc_free_pcms(socdev);
- return ret;
+ goto error_del_driver;
}
+ return 0;
+
+error_del_driver:
+#ifdef USE_I2C
+ i2c_del_driver(&cs4270_i2c_driver);
+
+error_free_pcms:
+#endif
+ snd_soc_free_pcms(socdev);
+
+error_free_codec:
+ kfree(socdev->codec);
+ socdev->codec = NULL;
+
return ret;
}
@@ -727,8 +739,7 @@
snd_soc_free_pcms(socdev);
#ifdef USE_I2C
- if (socdev->codec->control_data)
- i2c_del_driver(&cs4270_i2c_driver);
+ i2c_del_driver(&cs4270_i2c_driver);
#endif
kfree(socdev->codec);