| /* |
| * MPC8378E RDB Device Tree Source |
| * |
| * Copyright 2007, 2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| compatible = "fsl,mpc8378rdb"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8378@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; |
| i-cache-line-size = <32>; |
| d-cache-size = <32768>; |
| i-cache-size = <32768>; |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; // 256MB at 0 |
| }; |
| |
| localbus@e0005000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; |
| reg = <0xe0005000 0x1000>; |
| interrupts = <77 0x8>; |
| interrupt-parent = <&ipic>; |
| |
| // CS0 and CS1 are swapped when |
| // booting from nand, but the |
| // addresses are the same. |
| ranges = <0x0 0x0 0xfe000000 0x00800000 |
| 0x1 0x0 0xe0600000 0x00008000 |
| 0x2 0x0 0xf0000000 0x00020000 |
| 0x3 0x0 0xfa000000 0x00008000>; |
| |
| flash@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x800000>; |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| nand@1,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8378-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <0x1 0x0 0x8000>; |
| |
| u-boot@0 { |
| reg = <0x0 0x100000>; |
| read-only; |
| }; |
| |
| kernel@100000 { |
| reg = <0x100000 0x300000>; |
| }; |
| fs@400000 { |
| reg = <0x400000 0x1c00000>; |
| }; |
| }; |
| }; |
| |
| immr@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| ranges = <0x0 0xe0000000 0x00100000>; |
| reg = <0xe0000000 0x00000200>; |
| bus-frequency = <0>; |
| |
| wdt@200 { |
| device_type = "watchdog"; |
| compatible = "mpc83xx_wdt"; |
| reg = <0x200 0x100>; |
| }; |
| |
| gpio1: gpio-controller@c00 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; |
| reg = <0xc00 0x100>; |
| interrupts = <74 0x8>; |
| interrupt-parent = <&ipic>; |
| gpio-controller; |
| }; |
| |
| gpio2: gpio-controller@d00 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; |
| reg = <0xd00 0x100>; |
| interrupts = <75 0x8>; |
| interrupt-parent = <&ipic>; |
| gpio-controller; |
| }; |
| |
| sleep-nexus { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| sleep = <&pmc 0x0c000000>; |
| ranges; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <14 0x8>; |
| interrupt-parent = <&ipic>; |
| dfsrr; |
| |
| dtt@48 { |
| compatible = "national,lm75"; |
| reg = <0x48>; |
| }; |
| |
| at24@50 { |
| compatible = "at24,24c256"; |
| reg = <0x50>; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| }; |
| |
| mcu_pio: mcu@a { |
| #gpio-cells = <2>; |
| compatible = "fsl,mc9s08qg8-mpc8378erdb", |
| "fsl,mcu-mpc8349emitx"; |
| reg = <0x0a>; |
| gpio-controller; |
| }; |
| }; |
| |
| sdhci@2e000 { |
| compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <42 0x8>; |
| interrupt-parent = <&ipic>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <15 0x8>; |
| interrupt-parent = <&ipic>; |
| dfsrr; |
| }; |
| |
| spi@7000 { |
| cell-index = <0>; |
| compatible = "fsl,spi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <16 0x8>; |
| interrupt-parent = <&ipic>; |
| mode = "cpu"; |
| }; |
| |
| dma@82a8 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; |
| reg = <0x82a8 4>; |
| ranges = <0 0x8100 0x1a8>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x180 0x28>; |
| cell-index = <3>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| }; |
| |
| usb@23000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x23000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&ipic>; |
| interrupts = <38 0x8>; |
| phy_type = "ulpi"; |
| sleep = <&pmc 0x00c00000>; |
| }; |
| |
| enet0: ethernet@24000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| ranges = <0x0 0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <32 0x8 33 0x8 34 0x8>; |
| phy-connection-type = "mii"; |
| interrupt-parent = <&ipic>; |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy2>; |
| sleep = <&pmc 0xc0000000>; |
| fsl,magic-packet; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x520 0x20>; |
| |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&ipic>; |
| interrupts = <17 0x8>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| enet1: ethernet@25000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| ranges = <0x0 0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <35 0x8 36 0x8 37 0x8>; |
| phy-connection-type = "mii"; |
| interrupt-parent = <&ipic>; |
| fixed-link = <1 1 1000 0 0>; |
| tbi-handle = <&tbi1>; |
| sleep = <&pmc 0x30000000>; |
| fsl,magic-packet; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-tbi"; |
| reg = <0x520 0x20>; |
| |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <9 0x8>; |
| interrupt-parent = <&ipic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <10 0x8>; |
| interrupt-parent = <&ipic>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", |
| "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <11 0x8>; |
| interrupt-parent = <&ipic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0x9fe>; |
| fsl,descriptor-types-mask = <0x3ab0ebf>; |
| sleep = <&pmc 0x03000000>; |
| }; |
| |
| /* IPIC |
| * interrupts cell = <intr #, sense> |
| * sense values match linux IORESOURCE_IRQ_* defines: |
| * sense == 8: Level, low assertion |
| * sense == 2: Edge, high-to-low change |
| */ |
| ipic: interrupt-controller@700 { |
| compatible = "fsl,ipic"; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x700 0x100>; |
| }; |
| |
| pmc: power@b00 { |
| compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; |
| reg = <0xb00 0x100 0xa00 0x100>; |
| interrupts = <80 0x8>; |
| interrupt-parent = <&ipic>; |
| }; |
| }; |
| |
| pci0: pci@e0008500 { |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ |
| |
| /* IDSEL AD14 IRQ6 inta */ |
| 0x7000 0x0 0x0 0x1 &ipic 22 0x8 |
| |
| /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ |
| 0x7800 0x0 0x0 0x1 &ipic 21 0x8 |
| 0x7800 0x0 0x0 0x2 &ipic 22 0x8 |
| 0x7800 0x0 0x0 0x4 &ipic 23 0x8 |
| |
| /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ |
| 0xE000 0x0 0x0 0x1 &ipic 23 0x8 |
| 0xE000 0x0 0x0 0x2 &ipic 21 0x8 |
| 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; |
| interrupt-parent = <&ipic>; |
| interrupts = <66 0x8>; |
| bus-range = <0 0>; |
| ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; |
| sleep = <&pmc 0x00010000>; |
| clock-frequency = <66666666>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008500 0x100 /* internal registers */ |
| 0xe0008300 0x8>; /* config space access registers */ |
| compatible = "fsl,mpc8349-pci"; |
| device_type = "pci"; |
| }; |
| |
| pci1: pcie@e0009000 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; |
| reg = <0xe0009000 0x00001000>; |
| ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; |
| bus-range = <0 255>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = <0 0 0 1 &ipic 1 8 |
| 0 0 0 2 &ipic 1 8 |
| 0 0 0 3 &ipic 1 8 |
| 0 0 0 4 &ipic 1 8>; |
| sleep = <&pmc 0x00300000>; |
| clock-frequency = <0>; |
| |
| pcie@0 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| reg = <0 0 0 0 0>; |
| ranges = <0x02000000 0 0xa8000000 |
| 0x02000000 0 0xa8000000 |
| 0 0x10000000 |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00800000>; |
| }; |
| }; |
| |
| pci2: pcie@e000a000 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; |
| reg = <0xe000a000 0x00001000>; |
| ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; |
| bus-range = <0 255>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = <0 0 0 1 &ipic 2 8 |
| 0 0 0 2 &ipic 2 8 |
| 0 0 0 3 &ipic 2 8 |
| 0 0 0 4 &ipic 2 8>; |
| sleep = <&pmc 0x000c0000>; |
| clock-frequency = <0>; |
| |
| pcie@0 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| reg = <0 0 0 0 0>; |
| ranges = <0x02000000 0 0xc8000000 |
| 0x02000000 0 0xc8000000 |
| 0 0x10000000 |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00800000>; |
| }; |
| }; |
| }; |