| #ifndef __SOUND_EMU8000_H |
| #define __SOUND_EMU8000_H |
| /* |
| * Defines for the emu8000 (AWE32/64) |
| * |
| * Copyright (C) 1999 Steve Ratcliffe |
| * Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include "emux_synth.h" |
| #include "seq_kernel.h" |
| |
| /* |
| * Hardware parameters. |
| */ |
| #define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/ |
| #define EMU8000_DRAM_OFFSET 0x200000 /* Beginning of on board ram */ |
| #define EMU8000_CHANNELS 32 /* Number of hardware channels */ |
| #define EMU8000_DRAM_VOICES 30 /* number of normal voices */ |
| |
| /* Flags to set a dma channel to read or write */ |
| #define EMU8000_RAM_READ 0 |
| #define EMU8000_RAM_WRITE 1 |
| #define EMU8000_RAM_CLOSE 2 |
| #define EMU8000_RAM_MODE_MASK 0x03 |
| #define EMU8000_RAM_RIGHT 0x10 /* use 'right' DMA channel */ |
| |
| enum { |
| EMU8000_CONTROL_BASS = 0, |
| EMU8000_CONTROL_TREBLE, |
| EMU8000_CONTROL_CHORUS_MODE, |
| EMU8000_CONTROL_REVERB_MODE, |
| EMU8000_CONTROL_FM_CHORUS_DEPTH, |
| EMU8000_CONTROL_FM_REVERB_DEPTH, |
| EMU8000_NUM_CONTROLS, |
| }; |
| |
| /* |
| * Structure to hold all state information for the emu8000 driver. |
| * |
| * Note 1: The chip supports 32 channels in hardware this is max_channels |
| * some of the channels may be used for other things so max_channels is |
| * the number in use for wave voices. |
| */ |
| struct snd_emu8000 { |
| |
| struct snd_emux *emu; |
| |
| int index; /* sequencer client index */ |
| int seq_ports; /* number of sequencer ports */ |
| int fm_chorus_depth; /* FM OPL3 chorus depth */ |
| int fm_reverb_depth; /* FM OPL3 reverb depth */ |
| |
| int mem_size; /* memory size */ |
| unsigned long port1; /* Port usually base+0 */ |
| unsigned long port2; /* Port usually at base+0x400 */ |
| unsigned long port3; /* Port usually at base+0x800 */ |
| struct resource *res_port1; |
| struct resource *res_port2; |
| struct resource *res_port3; |
| unsigned short last_reg;/* Last register command */ |
| spinlock_t reg_lock; |
| |
| int dram_checked; |
| |
| struct snd_card *card; /* The card that this belongs to */ |
| |
| int chorus_mode; |
| int reverb_mode; |
| int bass_level; |
| int treble_level; |
| |
| struct snd_util_memhdr *memhdr; |
| |
| spinlock_t control_lock; |
| struct snd_kcontrol *controls[EMU8000_NUM_CONTROLS]; |
| |
| struct snd_pcm *pcm; /* pcm on emu8000 wavetable */ |
| |
| }; |
| |
| /* sequencer device id */ |
| #define SNDRV_SEQ_DEV_ID_EMU8000 "emu8000-synth" |
| |
| |
| /* exported functions */ |
| int snd_emu8000_new(struct snd_card *card, int device, long port, int seq_ports, |
| struct snd_seq_device **ret); |
| void snd_emu8000_poke(struct snd_emu8000 *emu, unsigned int port, unsigned int reg, |
| unsigned int val); |
| unsigned short snd_emu8000_peek(struct snd_emu8000 *emu, unsigned int port, |
| unsigned int reg); |
| void snd_emu8000_poke_dw(struct snd_emu8000 *emu, unsigned int port, unsigned int reg, |
| unsigned int val); |
| unsigned int snd_emu8000_peek_dw(struct snd_emu8000 *emu, unsigned int port, |
| unsigned int reg); |
| void snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode); |
| |
| void snd_emu8000_init_fm(struct snd_emu8000 *emu); |
| |
| void snd_emu8000_update_chorus_mode(struct snd_emu8000 *emu); |
| void snd_emu8000_update_reverb_mode(struct snd_emu8000 *emu); |
| void snd_emu8000_update_equalizer(struct snd_emu8000 *emu); |
| int snd_emu8000_load_chorus_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len); |
| int snd_emu8000_load_reverb_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len); |
| |
| #endif /* __SOUND_EMU8000_H */ |