| /* |
| * (C) Copyright David Brownell 2000-2002 |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #ifdef CONFIG_PPC_PMAC |
| #include <asm/machdep.h> |
| #include <asm/pmac_feature.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/prom.h> |
| #endif |
| |
| #include "usb.h" |
| |
| |
| /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| /* Coordinate handoffs between EHCI and companion controllers |
| * during system resume |
| */ |
| |
| static DEFINE_MUTEX(companions_mutex); |
| |
| #define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI |
| #define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI |
| #define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI |
| |
| enum companion_action { |
| SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS |
| }; |
| |
| static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, |
| enum companion_action action) |
| { |
| struct pci_dev *companion; |
| struct usb_hcd *companion_hcd; |
| unsigned int slot = PCI_SLOT(pdev->devfn); |
| |
| /* Iterate through other PCI functions in the same slot. |
| * If pdev is OHCI or UHCI then we are looking for EHCI, and |
| * vice versa. |
| */ |
| companion = NULL; |
| for (;;) { |
| companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion); |
| if (!companion) |
| break; |
| if (companion->bus != pdev->bus || |
| PCI_SLOT(companion->devfn) != slot) |
| continue; |
| |
| companion_hcd = pci_get_drvdata(companion); |
| if (!companion_hcd) |
| continue; |
| |
| /* For SET_HS_COMPANION, store a pointer to the EHCI bus in |
| * the OHCI/UHCI companion bus structure. |
| * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus |
| * in the OHCI/UHCI companion bus structure. |
| * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI |
| * companion controllers have fully resumed. |
| */ |
| |
| if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) && |
| companion->class == CL_EHCI) { |
| /* action must be SET_HS_COMPANION */ |
| dev_dbg(&companion->dev, "HS companion for %s\n", |
| dev_name(&pdev->dev)); |
| hcd->self.hs_companion = &companion_hcd->self; |
| |
| } else if (pdev->class == CL_EHCI && |
| (companion->class == CL_OHCI || |
| companion->class == CL_UHCI)) { |
| switch (action) { |
| case SET_HS_COMPANION: |
| dev_dbg(&pdev->dev, "HS companion for %s\n", |
| dev_name(&companion->dev)); |
| companion_hcd->self.hs_companion = &hcd->self; |
| break; |
| case CLEAR_HS_COMPANION: |
| companion_hcd->self.hs_companion = NULL; |
| break; |
| case WAIT_FOR_COMPANIONS: |
| device_pm_wait_for_dev(&pdev->dev, |
| &companion->dev); |
| break; |
| } |
| } |
| } |
| } |
| |
| static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) |
| { |
| mutex_lock(&companions_mutex); |
| dev_set_drvdata(&pdev->dev, hcd); |
| companion_common(pdev, hcd, SET_HS_COMPANION); |
| mutex_unlock(&companions_mutex); |
| } |
| |
| static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) |
| { |
| mutex_lock(&companions_mutex); |
| dev_set_drvdata(&pdev->dev, NULL); |
| |
| /* If pdev is OHCI or UHCI, just clear its hs_companion pointer */ |
| if (pdev->class == CL_OHCI || pdev->class == CL_UHCI) |
| hcd->self.hs_companion = NULL; |
| |
| /* Otherwise search for companion buses and clear their pointers */ |
| else |
| companion_common(pdev, hcd, CLEAR_HS_COMPANION); |
| mutex_unlock(&companions_mutex); |
| } |
| |
| static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd) |
| { |
| /* Only EHCI controllers need to wait. |
| * No locking is needed because a controller cannot be resumed |
| * while one of its companions is getting unbound. |
| */ |
| if (pdev->class == CL_EHCI) |
| companion_common(pdev, hcd, WAIT_FOR_COMPANIONS); |
| } |
| |
| #else /* !CONFIG_PM_SLEEP */ |
| |
| static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} |
| static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} |
| static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {} |
| |
| #endif /* !CONFIG_PM_SLEEP */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* configure so an HC device and id are always provided */ |
| /* always called with process context; sleeping is OK */ |
| |
| /** |
| * usb_hcd_pci_probe - initialize PCI-based HCDs |
| * @dev: USB Host Controller being probed |
| * @id: pci hotplug id connecting controller to HCD framework |
| * Context: !in_interrupt() |
| * |
| * Allocates basic PCI resources for this USB host controller, and |
| * then invokes the start() method for the HCD associated with it |
| * through the hotplug entry's driver_data. |
| * |
| * Store this function in the HCD's struct pci_driver as probe(). |
| */ |
| int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| struct hc_driver *driver; |
| struct usb_hcd *hcd; |
| int retval; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| if (!id) |
| return -EINVAL; |
| driver = (struct hc_driver *)id->driver_data; |
| if (!driver) |
| return -EINVAL; |
| |
| if (pci_enable_device(dev) < 0) |
| return -ENODEV; |
| dev->current_state = PCI_D0; |
| |
| if (!dev->irq) { |
| dev_err(&dev->dev, |
| "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", |
| pci_name(dev)); |
| retval = -ENODEV; |
| goto err1; |
| } |
| |
| hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev)); |
| if (!hcd) { |
| retval = -ENOMEM; |
| goto err1; |
| } |
| |
| if (driver->flags & HCD_MEMORY) { |
| /* EHCI, OHCI */ |
| hcd->rsrc_start = pci_resource_start(dev, 0); |
| hcd->rsrc_len = pci_resource_len(dev, 0); |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, |
| driver->description)) { |
| dev_dbg(&dev->dev, "controller already in use\n"); |
| retval = -EBUSY; |
| goto err2; |
| } |
| hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); |
| if (hcd->regs == NULL) { |
| dev_dbg(&dev->dev, "error mapping memory\n"); |
| retval = -EFAULT; |
| goto err3; |
| } |
| |
| } else { |
| /* UHCI */ |
| int region; |
| |
| for (region = 0; region < PCI_ROM_RESOURCE; region++) { |
| if (!(pci_resource_flags(dev, region) & |
| IORESOURCE_IO)) |
| continue; |
| |
| hcd->rsrc_start = pci_resource_start(dev, region); |
| hcd->rsrc_len = pci_resource_len(dev, region); |
| if (request_region(hcd->rsrc_start, hcd->rsrc_len, |
| driver->description)) |
| break; |
| } |
| if (region == PCI_ROM_RESOURCE) { |
| dev_dbg(&dev->dev, "no i/o regions available\n"); |
| retval = -EBUSY; |
| goto err2; |
| } |
| } |
| |
| pci_set_master(dev); |
| |
| retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); |
| if (retval != 0) |
| goto err4; |
| set_hs_companion(dev, hcd); |
| return retval; |
| |
| err4: |
| if (driver->flags & HCD_MEMORY) { |
| iounmap(hcd->regs); |
| err3: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| } else |
| release_region(hcd->rsrc_start, hcd->rsrc_len); |
| err2: |
| clear_hs_companion(dev, hcd); |
| usb_put_hcd(hcd); |
| err1: |
| pci_disable_device(dev); |
| dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval); |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(usb_hcd_pci_probe); |
| |
| |
| /* may be called without controller electrically present */ |
| /* may be called with controller, bus, and devices active */ |
| |
| /** |
| * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs |
| * @dev: USB Host Controller being removed |
| * Context: !in_interrupt() |
| * |
| * Reverses the effect of usb_hcd_pci_probe(), first invoking |
| * the HCD's stop() method. It is always called from a thread |
| * context, normally "rmmod", "apmd", or something similar. |
| * |
| * Store this function in the HCD's struct pci_driver as remove(). |
| */ |
| void usb_hcd_pci_remove(struct pci_dev *dev) |
| { |
| struct usb_hcd *hcd; |
| |
| hcd = pci_get_drvdata(dev); |
| if (!hcd) |
| return; |
| |
| usb_remove_hcd(hcd); |
| if (hcd->driver->flags & HCD_MEMORY) { |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| } else { |
| release_region(hcd->rsrc_start, hcd->rsrc_len); |
| } |
| clear_hs_companion(dev, hcd); |
| usb_put_hcd(hcd); |
| pci_disable_device(dev); |
| } |
| EXPORT_SYMBOL_GPL(usb_hcd_pci_remove); |
| |
| /** |
| * usb_hcd_pci_shutdown - shutdown host controller |
| * @dev: USB Host Controller being shutdown |
| */ |
| void usb_hcd_pci_shutdown(struct pci_dev *dev) |
| { |
| struct usb_hcd *hcd; |
| |
| hcd = pci_get_drvdata(dev); |
| if (!hcd) |
| return; |
| |
| if (hcd->driver->shutdown) |
| hcd->driver->shutdown(hcd); |
| } |
| EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static int check_root_hub_suspended(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct usb_hcd *hcd = pci_get_drvdata(pci_dev); |
| |
| if (!(hcd->state == HC_STATE_SUSPENDED || |
| hcd->state == HC_STATE_HALT)) { |
| dev_warn(dev, "Root hub is not suspended\n"); |
| return -EBUSY; |
| } |
| return 0; |
| } |
| |
| static int hcd_pci_suspend(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct usb_hcd *hcd = pci_get_drvdata(pci_dev); |
| int retval; |
| |
| /* Root hub suspend should have stopped all downstream traffic, |
| * and all bus master traffic. And done so for both the interface |
| * and the stub usb_device (which we check here). But maybe it |
| * didn't; writing sysfs power/state files ignores such rules... |
| */ |
| retval = check_root_hub_suspended(dev); |
| if (retval) |
| return retval; |
| |
| /* We might already be suspended (runtime PM -- not yet written) */ |
| if (pci_dev->current_state != PCI_D0) |
| return retval; |
| |
| if (hcd->driver->pci_suspend) { |
| retval = hcd->driver->pci_suspend(hcd); |
| suspend_report_result(hcd->driver->pci_suspend, retval); |
| if (retval) |
| return retval; |
| } |
| |
| synchronize_irq(pci_dev->irq); |
| |
| /* Downstream ports from this root hub should already be quiesced, so |
| * there will be no DMA activity. Now we can shut down the upstream |
| * link (except maybe for PME# resume signaling). We'll enter a |
| * low power state during suspend_noirq, if the hardware allows. |
| */ |
| pci_disable_device(pci_dev); |
| return retval; |
| } |
| |
| static int hcd_pci_suspend_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct usb_hcd *hcd = pci_get_drvdata(pci_dev); |
| int retval; |
| |
| retval = check_root_hub_suspended(dev); |
| if (retval) |
| return retval; |
| |
| pci_save_state(pci_dev); |
| |
| /* If the root hub is HALTed rather than SUSPENDed, |
| * disallow remote wakeup. |
| */ |
| if (hcd->state == HC_STATE_HALT) |
| device_set_wakeup_enable(dev, 0); |
| dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev)); |
| |
| /* Possibly enable remote wakeup, |
| * choose the appropriate low-power state, and go to that state. |
| */ |
| retval = pci_prepare_to_sleep(pci_dev); |
| if (retval == -EIO) { /* Low-power not supported */ |
| dev_dbg(dev, "--> PCI D0 legacy\n"); |
| retval = 0; |
| } else if (retval == 0) { |
| dev_dbg(dev, "--> PCI %s\n", |
| pci_power_name(pci_dev->current_state)); |
| } else { |
| suspend_report_result(pci_prepare_to_sleep, retval); |
| return retval; |
| } |
| |
| #ifdef CONFIG_PPC_PMAC |
| /* Disable ASIC clocks for USB */ |
| if (machine_is(powermac)) { |
| struct device_node *of_node; |
| |
| of_node = pci_device_to_OF_node(pci_dev); |
| if (of_node) |
| pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0); |
| } |
| #endif |
| return retval; |
| } |
| |
| static int hcd_pci_resume_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| |
| #ifdef CONFIG_PPC_PMAC |
| /* Reenable ASIC clocks for USB */ |
| if (machine_is(powermac)) { |
| struct device_node *of_node; |
| |
| of_node = pci_device_to_OF_node(pci_dev); |
| if (of_node) |
| pmac_call_feature(PMAC_FTR_USB_ENABLE, |
| of_node, 0, 1); |
| } |
| #endif |
| |
| /* Go back to D0 and disable remote wakeup */ |
| pci_back_from_sleep(pci_dev); |
| return 0; |
| } |
| |
| static int resume_common(struct device *dev, bool hibernated) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct usb_hcd *hcd = pci_get_drvdata(pci_dev); |
| int retval; |
| |
| if (hcd->state != HC_STATE_SUSPENDED) { |
| dev_dbg(dev, "can't resume, not suspended!\n"); |
| return 0; |
| } |
| |
| retval = pci_enable_device(pci_dev); |
| if (retval < 0) { |
| dev_err(dev, "can't re-enable after resume, %d!\n", retval); |
| return retval; |
| } |
| |
| pci_set_master(pci_dev); |
| |
| clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); |
| |
| if (hcd->driver->pci_resume) { |
| /* This call should be made only during system resume, |
| * not during runtime resume. |
| */ |
| wait_for_companions(pci_dev, hcd); |
| |
| retval = hcd->driver->pci_resume(hcd, hibernated); |
| if (retval) { |
| dev_err(dev, "PCI post-resume error %d!\n", retval); |
| usb_hc_died(hcd); |
| } |
| } |
| return retval; |
| } |
| |
| static int hcd_pci_resume(struct device *dev) |
| { |
| return resume_common(dev, false); |
| } |
| |
| static int hcd_pci_restore(struct device *dev) |
| { |
| return resume_common(dev, true); |
| } |
| |
| const struct dev_pm_ops usb_hcd_pci_pm_ops = { |
| .suspend = hcd_pci_suspend, |
| .suspend_noirq = hcd_pci_suspend_noirq, |
| .resume_noirq = hcd_pci_resume_noirq, |
| .resume = hcd_pci_resume, |
| .freeze = check_root_hub_suspended, |
| .freeze_noirq = check_root_hub_suspended, |
| .thaw_noirq = NULL, |
| .thaw = NULL, |
| .poweroff = hcd_pci_suspend, |
| .poweroff_noirq = hcd_pci_suspend_noirq, |
| .restore_noirq = hcd_pci_resume_noirq, |
| .restore = hcd_pci_restore, |
| }; |
| EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); |
| |
| #endif /* CONFIG_PM_SLEEP */ |