| /* |
| * Freescale MPC85xx, MPC83xx DMA Engine support |
| * |
| * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Author: |
| * Zhang Wei <wei.zhang@freescale.com>, Jul 2007 |
| * Ebony Zhu <ebony.zhu@freescale.com>, May 2007 |
| * |
| * Description: |
| * DMA engine driver for Freescale MPC8540 DMA controller, which is |
| * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. |
| * The support for MPC8349 DMA contorller is also added. |
| * |
| * This driver instructs the DMA controller to issue the PCI Read Multiple |
| * command for PCI read operations, instead of using the default PCI Read Line |
| * command. Please be aware that this setting may result in read pre-fetching |
| * on some platforms. |
| * |
| * This is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/dmaengine.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/fsldma.h> |
| #include "fsldma.h" |
| |
| static void dma_init(struct fsldma_chan *fsl_chan) |
| { |
| /* Reset the channel */ |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, 0, 32); |
| |
| switch (fsl_chan->feature & FSL_DMA_IP_MASK) { |
| case FSL_DMA_IP_85XX: |
| /* Set the channel to below modes: |
| * EIE - Error interrupt enable |
| * EOSIE - End of segments interrupt enable (basic mode) |
| * EOLNIE - End of links interrupt enable |
| */ |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, FSL_DMA_MR_EIE |
| | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32); |
| break; |
| case FSL_DMA_IP_83XX: |
| /* Set the channel to below modes: |
| * EOTIE - End-of-transfer interrupt enable |
| * PRC_RM - PCI read multiple |
| */ |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, FSL_DMA_MR_EOTIE |
| | FSL_DMA_MR_PRC_RM, 32); |
| break; |
| } |
| |
| } |
| |
| static void set_sr(struct fsldma_chan *fsl_chan, u32 val) |
| { |
| DMA_OUT(fsl_chan, &fsl_chan->regs->sr, val, 32); |
| } |
| |
| static u32 get_sr(struct fsldma_chan *fsl_chan) |
| { |
| return DMA_IN(fsl_chan, &fsl_chan->regs->sr, 32); |
| } |
| |
| static void set_desc_cnt(struct fsldma_chan *fsl_chan, |
| struct fsl_dma_ld_hw *hw, u32 count) |
| { |
| hw->count = CPU_TO_DMA(fsl_chan, count, 32); |
| } |
| |
| static void set_desc_src(struct fsldma_chan *fsl_chan, |
| struct fsl_dma_ld_hw *hw, dma_addr_t src) |
| { |
| u64 snoop_bits; |
| |
| snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) |
| ? ((u64)FSL_DMA_SATR_SREADTYPE_SNOOP_READ << 32) : 0; |
| hw->src_addr = CPU_TO_DMA(fsl_chan, snoop_bits | src, 64); |
| } |
| |
| static void set_desc_dst(struct fsldma_chan *fsl_chan, |
| struct fsl_dma_ld_hw *hw, dma_addr_t dst) |
| { |
| u64 snoop_bits; |
| |
| snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) |
| ? ((u64)FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE << 32) : 0; |
| hw->dst_addr = CPU_TO_DMA(fsl_chan, snoop_bits | dst, 64); |
| } |
| |
| static void set_desc_next(struct fsldma_chan *fsl_chan, |
| struct fsl_dma_ld_hw *hw, dma_addr_t next) |
| { |
| u64 snoop_bits; |
| |
| snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX) |
| ? FSL_DMA_SNEN : 0; |
| hw->next_ln_addr = CPU_TO_DMA(fsl_chan, snoop_bits | next, 64); |
| } |
| |
| static void set_cdar(struct fsldma_chan *fsl_chan, dma_addr_t addr) |
| { |
| DMA_OUT(fsl_chan, &fsl_chan->regs->cdar, addr | FSL_DMA_SNEN, 64); |
| } |
| |
| static dma_addr_t get_cdar(struct fsldma_chan *fsl_chan) |
| { |
| return DMA_IN(fsl_chan, &fsl_chan->regs->cdar, 64) & ~FSL_DMA_SNEN; |
| } |
| |
| static void set_ndar(struct fsldma_chan *fsl_chan, dma_addr_t addr) |
| { |
| DMA_OUT(fsl_chan, &fsl_chan->regs->ndar, addr, 64); |
| } |
| |
| static dma_addr_t get_ndar(struct fsldma_chan *fsl_chan) |
| { |
| return DMA_IN(fsl_chan, &fsl_chan->regs->ndar, 64); |
| } |
| |
| static u32 get_bcr(struct fsldma_chan *fsl_chan) |
| { |
| return DMA_IN(fsl_chan, &fsl_chan->regs->bcr, 32); |
| } |
| |
| static int dma_is_idle(struct fsldma_chan *fsl_chan) |
| { |
| u32 sr = get_sr(fsl_chan); |
| return (!(sr & FSL_DMA_SR_CB)) || (sr & FSL_DMA_SR_CH); |
| } |
| |
| static void dma_start(struct fsldma_chan *fsl_chan) |
| { |
| u32 mode; |
| |
| mode = DMA_IN(fsl_chan, &fsl_chan->regs->mr, 32); |
| |
| if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { |
| if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { |
| DMA_OUT(fsl_chan, &fsl_chan->regs->bcr, 0, 32); |
| mode |= FSL_DMA_MR_EMP_EN; |
| } else { |
| mode &= ~FSL_DMA_MR_EMP_EN; |
| } |
| } |
| |
| if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT) |
| mode |= FSL_DMA_MR_EMS_EN; |
| else |
| mode |= FSL_DMA_MR_CS; |
| |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, mode, 32); |
| } |
| |
| static void dma_halt(struct fsldma_chan *fsl_chan) |
| { |
| u32 mode; |
| int i; |
| |
| mode = DMA_IN(fsl_chan, &fsl_chan->regs->mr, 32); |
| mode |= FSL_DMA_MR_CA; |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, mode, 32); |
| |
| mode &= ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA); |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, mode, 32); |
| |
| for (i = 0; i < 100; i++) { |
| if (dma_is_idle(fsl_chan)) |
| break; |
| udelay(10); |
| } |
| |
| if (i >= 100 && !dma_is_idle(fsl_chan)) |
| dev_err(fsl_chan->dev, "DMA halt timeout!\n"); |
| } |
| |
| static void set_ld_eol(struct fsldma_chan *fsl_chan, |
| struct fsl_desc_sw *desc) |
| { |
| u64 snoop_bits; |
| |
| snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX) |
| ? FSL_DMA_SNEN : 0; |
| |
| desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, |
| DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL |
| | snoop_bits, 64); |
| } |
| |
| static void append_ld_queue(struct fsldma_chan *fsl_chan, |
| struct fsl_desc_sw *new_desc) |
| { |
| struct fsl_desc_sw *queue_tail = to_fsl_desc(fsl_chan->ld_queue.prev); |
| |
| if (list_empty(&fsl_chan->ld_queue)) |
| return; |
| |
| /* Link to the new descriptor physical address and |
| * Enable End-of-segment interrupt for |
| * the last link descriptor. |
| * (the previous node's next link descriptor) |
| * |
| * For FSL_DMA_IP_83xx, the snoop enable bit need be set. |
| */ |
| queue_tail->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, |
| new_desc->async_tx.phys | FSL_DMA_EOSIE | |
| (((fsl_chan->feature & FSL_DMA_IP_MASK) |
| == FSL_DMA_IP_83XX) ? FSL_DMA_SNEN : 0), 64); |
| } |
| |
| /** |
| * fsl_chan_set_src_loop_size - Set source address hold transfer size |
| * @fsl_chan : Freescale DMA channel |
| * @size : Address loop size, 0 for disable loop |
| * |
| * The set source address hold transfer size. The source |
| * address hold or loop transfer size is when the DMA transfer |
| * data from source address (SA), if the loop size is 4, the DMA will |
| * read data from SA, SA + 1, SA + 2, SA + 3, then loop back to SA, |
| * SA + 1 ... and so on. |
| */ |
| static void fsl_chan_set_src_loop_size(struct fsldma_chan *fsl_chan, int size) |
| { |
| u32 mode; |
| |
| mode = DMA_IN(fsl_chan, &fsl_chan->regs->mr, 32); |
| |
| switch (size) { |
| case 0: |
| mode &= ~FSL_DMA_MR_SAHE; |
| break; |
| case 1: |
| case 2: |
| case 4: |
| case 8: |
| mode |= FSL_DMA_MR_SAHE | (__ilog2(size) << 14); |
| break; |
| } |
| |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, mode, 32); |
| } |
| |
| /** |
| * fsl_chan_set_dst_loop_size - Set destination address hold transfer size |
| * @fsl_chan : Freescale DMA channel |
| * @size : Address loop size, 0 for disable loop |
| * |
| * The set destination address hold transfer size. The destination |
| * address hold or loop transfer size is when the DMA transfer |
| * data to destination address (TA), if the loop size is 4, the DMA will |
| * write data to TA, TA + 1, TA + 2, TA + 3, then loop back to TA, |
| * TA + 1 ... and so on. |
| */ |
| static void fsl_chan_set_dst_loop_size(struct fsldma_chan *fsl_chan, int size) |
| { |
| u32 mode; |
| |
| mode = DMA_IN(fsl_chan, &fsl_chan->regs->mr, 32); |
| |
| switch (size) { |
| case 0: |
| mode &= ~FSL_DMA_MR_DAHE; |
| break; |
| case 1: |
| case 2: |
| case 4: |
| case 8: |
| mode |= FSL_DMA_MR_DAHE | (__ilog2(size) << 16); |
| break; |
| } |
| |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, mode, 32); |
| } |
| |
| /** |
| * fsl_chan_set_request_count - Set DMA Request Count for external control |
| * @fsl_chan : Freescale DMA channel |
| * @size : Number of bytes to transfer in a single request |
| * |
| * The Freescale DMA channel can be controlled by the external signal DREQ#. |
| * The DMA request count is how many bytes are allowed to transfer before |
| * pausing the channel, after which a new assertion of DREQ# resumes channel |
| * operation. |
| * |
| * A size of 0 disables external pause control. The maximum size is 1024. |
| */ |
| static void fsl_chan_set_request_count(struct fsldma_chan *fsl_chan, int size) |
| { |
| u32 mode; |
| |
| BUG_ON(size > 1024); |
| |
| mode = DMA_IN(fsl_chan, &fsl_chan->regs->mr, 32); |
| mode |= (__ilog2(size) << 24) & 0x0f000000; |
| |
| DMA_OUT(fsl_chan, &fsl_chan->regs->mr, mode, 32); |
| } |
| |
| /** |
| * fsl_chan_toggle_ext_pause - Toggle channel external pause status |
| * @fsl_chan : Freescale DMA channel |
| * @enable : 0 is disabled, 1 is enabled. |
| * |
| * The Freescale DMA channel can be controlled by the external signal DREQ#. |
| * The DMA Request Count feature should be used in addition to this feature |
| * to set the number of bytes to transfer before pausing the channel. |
| */ |
| static void fsl_chan_toggle_ext_pause(struct fsldma_chan *fsl_chan, int enable) |
| { |
| if (enable) |
| fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT; |
| else |
| fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT; |
| } |
| |
| /** |
| * fsl_chan_toggle_ext_start - Toggle channel external start status |
| * @fsl_chan : Freescale DMA channel |
| * @enable : 0 is disabled, 1 is enabled. |
| * |
| * If enable the external start, the channel can be started by an |
| * external DMA start pin. So the dma_start() does not start the |
| * transfer immediately. The DMA channel will wait for the |
| * control pin asserted. |
| */ |
| static void fsl_chan_toggle_ext_start(struct fsldma_chan *fsl_chan, int enable) |
| { |
| if (enable) |
| fsl_chan->feature |= FSL_DMA_CHAN_START_EXT; |
| else |
| fsl_chan->feature &= ~FSL_DMA_CHAN_START_EXT; |
| } |
| |
| static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) |
| { |
| struct fsldma_chan *fsl_chan = to_fsl_chan(tx->chan); |
| struct fsl_desc_sw *desc = tx_to_fsl_desc(tx); |
| struct fsl_desc_sw *child; |
| unsigned long flags; |
| dma_cookie_t cookie; |
| |
| /* cookie increment and adding to ld_queue must be atomic */ |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| |
| cookie = fsl_chan->common.cookie; |
| list_for_each_entry(child, &desc->tx_list, node) { |
| cookie++; |
| if (cookie < 0) |
| cookie = 1; |
| |
| desc->async_tx.cookie = cookie; |
| } |
| |
| fsl_chan->common.cookie = cookie; |
| append_ld_queue(fsl_chan, desc); |
| list_splice_init(&desc->tx_list, fsl_chan->ld_queue.prev); |
| |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| |
| return cookie; |
| } |
| |
| /** |
| * fsl_dma_alloc_descriptor - Allocate descriptor from channel's DMA pool. |
| * @fsl_chan : Freescale DMA channel |
| * |
| * Return - The descriptor allocated. NULL for failed. |
| */ |
| static struct fsl_desc_sw *fsl_dma_alloc_descriptor( |
| struct fsldma_chan *fsl_chan) |
| { |
| dma_addr_t pdesc; |
| struct fsl_desc_sw *desc_sw; |
| |
| desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc); |
| if (desc_sw) { |
| memset(desc_sw, 0, sizeof(struct fsl_desc_sw)); |
| INIT_LIST_HEAD(&desc_sw->tx_list); |
| dma_async_tx_descriptor_init(&desc_sw->async_tx, |
| &fsl_chan->common); |
| desc_sw->async_tx.tx_submit = fsl_dma_tx_submit; |
| desc_sw->async_tx.phys = pdesc; |
| } |
| |
| return desc_sw; |
| } |
| |
| |
| /** |
| * fsl_dma_alloc_chan_resources - Allocate resources for DMA channel. |
| * @fsl_chan : Freescale DMA channel |
| * |
| * This function will create a dma pool for descriptor allocation. |
| * |
| * Return - The number of descriptors allocated. |
| */ |
| static int fsl_dma_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct fsldma_chan *fsl_chan = to_fsl_chan(chan); |
| |
| /* Has this channel already been allocated? */ |
| if (fsl_chan->desc_pool) |
| return 1; |
| |
| /* We need the descriptor to be aligned to 32bytes |
| * for meeting FSL DMA specification requirement. |
| */ |
| fsl_chan->desc_pool = dma_pool_create("fsl_dma_engine_desc_pool", |
| fsl_chan->dev, sizeof(struct fsl_desc_sw), |
| 32, 0); |
| if (!fsl_chan->desc_pool) { |
| dev_err(fsl_chan->dev, "No memory for channel %d " |
| "descriptor dma pool.\n", fsl_chan->id); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /** |
| * fsl_dma_free_chan_resources - Free all resources of the channel. |
| * @fsl_chan : Freescale DMA channel |
| */ |
| static void fsl_dma_free_chan_resources(struct dma_chan *chan) |
| { |
| struct fsldma_chan *fsl_chan = to_fsl_chan(chan); |
| struct fsl_desc_sw *desc, *_desc; |
| unsigned long flags; |
| |
| dev_dbg(fsl_chan->dev, "Free all channel resources.\n"); |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) { |
| #ifdef FSL_DMA_LD_DEBUG |
| dev_dbg(fsl_chan->dev, |
| "LD %p will be released.\n", desc); |
| #endif |
| list_del(&desc->node); |
| /* free link descriptor */ |
| dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys); |
| } |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| dma_pool_destroy(fsl_chan->desc_pool); |
| |
| fsl_chan->desc_pool = NULL; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| fsl_dma_prep_interrupt(struct dma_chan *chan, unsigned long flags) |
| { |
| struct fsldma_chan *fsl_chan; |
| struct fsl_desc_sw *new; |
| |
| if (!chan) |
| return NULL; |
| |
| fsl_chan = to_fsl_chan(chan); |
| |
| new = fsl_dma_alloc_descriptor(fsl_chan); |
| if (!new) { |
| dev_err(fsl_chan->dev, "No free memory for link descriptor\n"); |
| return NULL; |
| } |
| |
| new->async_tx.cookie = -EBUSY; |
| new->async_tx.flags = flags; |
| |
| /* Insert the link descriptor to the LD ring */ |
| list_add_tail(&new->node, &new->tx_list); |
| |
| /* Set End-of-link to the last link descriptor of new list*/ |
| set_ld_eol(fsl_chan, new); |
| |
| return &new->async_tx; |
| } |
| |
| static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( |
| struct dma_chan *chan, dma_addr_t dma_dst, dma_addr_t dma_src, |
| size_t len, unsigned long flags) |
| { |
| struct fsldma_chan *fsl_chan; |
| struct fsl_desc_sw *first = NULL, *prev = NULL, *new; |
| struct list_head *list; |
| size_t copy; |
| |
| if (!chan) |
| return NULL; |
| |
| if (!len) |
| return NULL; |
| |
| fsl_chan = to_fsl_chan(chan); |
| |
| do { |
| |
| /* Allocate the link descriptor from DMA pool */ |
| new = fsl_dma_alloc_descriptor(fsl_chan); |
| if (!new) { |
| dev_err(fsl_chan->dev, |
| "No free memory for link descriptor\n"); |
| goto fail; |
| } |
| #ifdef FSL_DMA_LD_DEBUG |
| dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); |
| #endif |
| |
| copy = min(len, (size_t)FSL_DMA_BCR_MAX_CNT); |
| |
| set_desc_cnt(fsl_chan, &new->hw, copy); |
| set_desc_src(fsl_chan, &new->hw, dma_src); |
| set_desc_dst(fsl_chan, &new->hw, dma_dst); |
| |
| if (!first) |
| first = new; |
| else |
| set_desc_next(fsl_chan, &prev->hw, new->async_tx.phys); |
| |
| new->async_tx.cookie = 0; |
| async_tx_ack(&new->async_tx); |
| |
| prev = new; |
| len -= copy; |
| dma_src += copy; |
| dma_dst += copy; |
| |
| /* Insert the link descriptor to the LD ring */ |
| list_add_tail(&new->node, &first->tx_list); |
| } while (len); |
| |
| new->async_tx.flags = flags; /* client is in control of this ack */ |
| new->async_tx.cookie = -EBUSY; |
| |
| /* Set End-of-link to the last link descriptor of new list*/ |
| set_ld_eol(fsl_chan, new); |
| |
| return &first->async_tx; |
| |
| fail: |
| if (!first) |
| return NULL; |
| |
| list = &first->tx_list; |
| list_for_each_entry_safe_reverse(new, prev, list, node) { |
| list_del(&new->node); |
| dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys); |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction |
| * @chan: DMA channel |
| * @sgl: scatterlist to transfer to/from |
| * @sg_len: number of entries in @scatterlist |
| * @direction: DMA direction |
| * @flags: DMAEngine flags |
| * |
| * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the |
| * DMA_SLAVE API, this gets the device-specific information from the |
| * chan->private variable. |
| */ |
| static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg( |
| struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, |
| enum dma_data_direction direction, unsigned long flags) |
| { |
| struct fsldma_chan *fsl_chan; |
| struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL; |
| struct fsl_dma_slave *slave; |
| struct list_head *tx_list; |
| size_t copy; |
| |
| int i; |
| struct scatterlist *sg; |
| size_t sg_used; |
| size_t hw_used; |
| struct fsl_dma_hw_addr *hw; |
| dma_addr_t dma_dst, dma_src; |
| |
| if (!chan) |
| return NULL; |
| |
| if (!chan->private) |
| return NULL; |
| |
| fsl_chan = to_fsl_chan(chan); |
| slave = chan->private; |
| |
| if (list_empty(&slave->addresses)) |
| return NULL; |
| |
| hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry); |
| hw_used = 0; |
| |
| /* |
| * Build the hardware transaction to copy from the scatterlist to |
| * the hardware, or from the hardware to the scatterlist |
| * |
| * If you are copying from the hardware to the scatterlist and it |
| * takes two hardware entries to fill an entire page, then both |
| * hardware entries will be coalesced into the same page |
| * |
| * If you are copying from the scatterlist to the hardware and a |
| * single page can fill two hardware entries, then the data will |
| * be read out of the page into the first hardware entry, and so on |
| */ |
| for_each_sg(sgl, sg, sg_len, i) { |
| sg_used = 0; |
| |
| /* Loop until the entire scatterlist entry is used */ |
| while (sg_used < sg_dma_len(sg)) { |
| |
| /* |
| * If we've used up the current hardware address/length |
| * pair, we need to load a new one |
| * |
| * This is done in a while loop so that descriptors with |
| * length == 0 will be skipped |
| */ |
| while (hw_used >= hw->length) { |
| |
| /* |
| * If the current hardware entry is the last |
| * entry in the list, we're finished |
| */ |
| if (list_is_last(&hw->entry, &slave->addresses)) |
| goto finished; |
| |
| /* Get the next hardware address/length pair */ |
| hw = list_entry(hw->entry.next, |
| struct fsl_dma_hw_addr, entry); |
| hw_used = 0; |
| } |
| |
| /* Allocate the link descriptor from DMA pool */ |
| new = fsl_dma_alloc_descriptor(fsl_chan); |
| if (!new) { |
| dev_err(fsl_chan->dev, "No free memory for " |
| "link descriptor\n"); |
| goto fail; |
| } |
| #ifdef FSL_DMA_LD_DEBUG |
| dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); |
| #endif |
| |
| /* |
| * Calculate the maximum number of bytes to transfer, |
| * making sure it is less than the DMA controller limit |
| */ |
| copy = min_t(size_t, sg_dma_len(sg) - sg_used, |
| hw->length - hw_used); |
| copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT); |
| |
| /* |
| * DMA_FROM_DEVICE |
| * from the hardware to the scatterlist |
| * |
| * DMA_TO_DEVICE |
| * from the scatterlist to the hardware |
| */ |
| if (direction == DMA_FROM_DEVICE) { |
| dma_src = hw->address + hw_used; |
| dma_dst = sg_dma_address(sg) + sg_used; |
| } else { |
| dma_src = sg_dma_address(sg) + sg_used; |
| dma_dst = hw->address + hw_used; |
| } |
| |
| /* Fill in the descriptor */ |
| set_desc_cnt(fsl_chan, &new->hw, copy); |
| set_desc_src(fsl_chan, &new->hw, dma_src); |
| set_desc_dst(fsl_chan, &new->hw, dma_dst); |
| |
| /* |
| * If this is not the first descriptor, chain the |
| * current descriptor after the previous descriptor |
| */ |
| if (!first) { |
| first = new; |
| } else { |
| set_desc_next(fsl_chan, &prev->hw, |
| new->async_tx.phys); |
| } |
| |
| new->async_tx.cookie = 0; |
| async_tx_ack(&new->async_tx); |
| |
| prev = new; |
| sg_used += copy; |
| hw_used += copy; |
| |
| /* Insert the link descriptor into the LD ring */ |
| list_add_tail(&new->node, &first->tx_list); |
| } |
| } |
| |
| finished: |
| |
| /* All of the hardware address/length pairs had length == 0 */ |
| if (!first || !new) |
| return NULL; |
| |
| new->async_tx.flags = flags; |
| new->async_tx.cookie = -EBUSY; |
| |
| /* Set End-of-link to the last link descriptor of new list */ |
| set_ld_eol(fsl_chan, new); |
| |
| /* Enable extra controller features */ |
| if (fsl_chan->set_src_loop_size) |
| fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size); |
| |
| if (fsl_chan->set_dst_loop_size) |
| fsl_chan->set_dst_loop_size(fsl_chan, slave->dst_loop_size); |
| |
| if (fsl_chan->toggle_ext_start) |
| fsl_chan->toggle_ext_start(fsl_chan, slave->external_start); |
| |
| if (fsl_chan->toggle_ext_pause) |
| fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause); |
| |
| if (fsl_chan->set_request_count) |
| fsl_chan->set_request_count(fsl_chan, slave->request_count); |
| |
| return &first->async_tx; |
| |
| fail: |
| /* If first was not set, then we failed to allocate the very first |
| * descriptor, and we're done */ |
| if (!first) |
| return NULL; |
| |
| /* |
| * First is set, so all of the descriptors we allocated have been added |
| * to first->tx_list, INCLUDING "first" itself. Therefore we |
| * must traverse the list backwards freeing each descriptor in turn |
| * |
| * We're re-using variables for the loop, oh well |
| */ |
| tx_list = &first->tx_list; |
| list_for_each_entry_safe_reverse(new, prev, tx_list, node) { |
| list_del_init(&new->node); |
| dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys); |
| } |
| |
| return NULL; |
| } |
| |
| static void fsl_dma_device_terminate_all(struct dma_chan *chan) |
| { |
| struct fsldma_chan *fsl_chan; |
| struct fsl_desc_sw *desc, *tmp; |
| unsigned long flags; |
| |
| if (!chan) |
| return; |
| |
| fsl_chan = to_fsl_chan(chan); |
| |
| /* Halt the DMA engine */ |
| dma_halt(fsl_chan); |
| |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| |
| /* Remove and free all of the descriptors in the LD queue */ |
| list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) { |
| list_del(&desc->node); |
| dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys); |
| } |
| |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| } |
| |
| /** |
| * fsl_dma_update_completed_cookie - Update the completed cookie. |
| * @fsl_chan : Freescale DMA channel |
| */ |
| static void fsl_dma_update_completed_cookie(struct fsldma_chan *fsl_chan) |
| { |
| struct fsl_desc_sw *cur_desc, *desc; |
| dma_addr_t ld_phy; |
| |
| ld_phy = get_cdar(fsl_chan) & FSL_DMA_NLDA_MASK; |
| |
| if (ld_phy) { |
| cur_desc = NULL; |
| list_for_each_entry(desc, &fsl_chan->ld_queue, node) |
| if (desc->async_tx.phys == ld_phy) { |
| cur_desc = desc; |
| break; |
| } |
| |
| if (cur_desc && cur_desc->async_tx.cookie) { |
| if (dma_is_idle(fsl_chan)) |
| fsl_chan->completed_cookie = |
| cur_desc->async_tx.cookie; |
| else |
| fsl_chan->completed_cookie = |
| cur_desc->async_tx.cookie - 1; |
| } |
| } |
| } |
| |
| /** |
| * fsl_chan_ld_cleanup - Clean up link descriptors |
| * @fsl_chan : Freescale DMA channel |
| * |
| * This function clean up the ld_queue of DMA channel. |
| * If 'in_intr' is set, the function will move the link descriptor to |
| * the recycle list. Otherwise, free it directly. |
| */ |
| static void fsl_chan_ld_cleanup(struct fsldma_chan *fsl_chan) |
| { |
| struct fsl_desc_sw *desc, *_desc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| |
| dev_dbg(fsl_chan->dev, "chan completed_cookie = %d\n", |
| fsl_chan->completed_cookie); |
| list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) { |
| dma_async_tx_callback callback; |
| void *callback_param; |
| |
| if (dma_async_is_complete(desc->async_tx.cookie, |
| fsl_chan->completed_cookie, fsl_chan->common.cookie) |
| == DMA_IN_PROGRESS) |
| break; |
| |
| callback = desc->async_tx.callback; |
| callback_param = desc->async_tx.callback_param; |
| |
| /* Remove from ld_queue list */ |
| list_del(&desc->node); |
| |
| dev_dbg(fsl_chan->dev, "link descriptor %p will be recycle.\n", |
| desc); |
| dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys); |
| |
| /* Run the link descriptor callback function */ |
| if (callback) { |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| dev_dbg(fsl_chan->dev, "link descriptor %p callback\n", |
| desc); |
| callback(callback_param); |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| } |
| } |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| } |
| |
| /** |
| * fsl_chan_xfer_ld_queue - Transfer link descriptors in channel ld_queue. |
| * @fsl_chan : Freescale DMA channel |
| */ |
| static void fsl_chan_xfer_ld_queue(struct fsldma_chan *fsl_chan) |
| { |
| struct list_head *ld_node; |
| dma_addr_t next_dst_addr; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| |
| if (!dma_is_idle(fsl_chan)) |
| goto out_unlock; |
| |
| dma_halt(fsl_chan); |
| |
| /* If there are some link descriptors |
| * not transfered in queue. We need to start it. |
| */ |
| |
| /* Find the first un-transfer desciptor */ |
| for (ld_node = fsl_chan->ld_queue.next; |
| (ld_node != &fsl_chan->ld_queue) |
| && (dma_async_is_complete( |
| to_fsl_desc(ld_node)->async_tx.cookie, |
| fsl_chan->completed_cookie, |
| fsl_chan->common.cookie) == DMA_SUCCESS); |
| ld_node = ld_node->next); |
| |
| if (ld_node != &fsl_chan->ld_queue) { |
| /* Get the ld start address from ld_queue */ |
| next_dst_addr = to_fsl_desc(ld_node)->async_tx.phys; |
| dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n", |
| (unsigned long long)next_dst_addr); |
| set_cdar(fsl_chan, next_dst_addr); |
| dma_start(fsl_chan); |
| } else { |
| set_cdar(fsl_chan, 0); |
| set_ndar(fsl_chan, 0); |
| } |
| |
| out_unlock: |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| } |
| |
| /** |
| * fsl_dma_memcpy_issue_pending - Issue the DMA start command |
| * @fsl_chan : Freescale DMA channel |
| */ |
| static void fsl_dma_memcpy_issue_pending(struct dma_chan *chan) |
| { |
| struct fsldma_chan *fsl_chan = to_fsl_chan(chan); |
| |
| #ifdef FSL_DMA_LD_DEBUG |
| struct fsl_desc_sw *ld; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fsl_chan->desc_lock, flags); |
| if (list_empty(&fsl_chan->ld_queue)) { |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| return; |
| } |
| |
| dev_dbg(fsl_chan->dev, "--memcpy issue--\n"); |
| list_for_each_entry(ld, &fsl_chan->ld_queue, node) { |
| int i; |
| dev_dbg(fsl_chan->dev, "Ch %d, LD %08x\n", |
| fsl_chan->id, ld->async_tx.phys); |
| for (i = 0; i < 8; i++) |
| dev_dbg(fsl_chan->dev, "LD offset %d: %08x\n", |
| i, *(((u32 *)&ld->hw) + i)); |
| } |
| dev_dbg(fsl_chan->dev, "----------------\n"); |
| spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); |
| #endif |
| |
| fsl_chan_xfer_ld_queue(fsl_chan); |
| } |
| |
| /** |
| * fsl_dma_is_complete - Determine the DMA status |
| * @fsl_chan : Freescale DMA channel |
| */ |
| static enum dma_status fsl_dma_is_complete(struct dma_chan *chan, |
| dma_cookie_t cookie, |
| dma_cookie_t *done, |
| dma_cookie_t *used) |
| { |
| struct fsldma_chan *fsl_chan = to_fsl_chan(chan); |
| dma_cookie_t last_used; |
| dma_cookie_t last_complete; |
| |
| fsl_chan_ld_cleanup(fsl_chan); |
| |
| last_used = chan->cookie; |
| last_complete = fsl_chan->completed_cookie; |
| |
| if (done) |
| *done = last_complete; |
| |
| if (used) |
| *used = last_used; |
| |
| return dma_async_is_complete(cookie, last_complete, last_used); |
| } |
| |
| /*----------------------------------------------------------------------------*/ |
| /* Interrupt Handling */ |
| /*----------------------------------------------------------------------------*/ |
| |
| static irqreturn_t fsldma_chan_irq(int irq, void *data) |
| { |
| struct fsldma_chan *fsl_chan = data; |
| u32 stat; |
| int update_cookie = 0; |
| int xfer_ld_q = 0; |
| |
| stat = get_sr(fsl_chan); |
| dev_dbg(fsl_chan->dev, "event: channel %d, stat = 0x%x\n", |
| fsl_chan->id, stat); |
| set_sr(fsl_chan, stat); /* Clear the event register */ |
| |
| stat &= ~(FSL_DMA_SR_CB | FSL_DMA_SR_CH); |
| if (!stat) |
| return IRQ_NONE; |
| |
| if (stat & FSL_DMA_SR_TE) |
| dev_err(fsl_chan->dev, "Transfer Error!\n"); |
| |
| /* Programming Error |
| * The DMA_INTERRUPT async_tx is a NULL transfer, which will |
| * triger a PE interrupt. |
| */ |
| if (stat & FSL_DMA_SR_PE) { |
| dev_dbg(fsl_chan->dev, "event: Programming Error INT\n"); |
| if (get_bcr(fsl_chan) == 0) { |
| /* BCR register is 0, this is a DMA_INTERRUPT async_tx. |
| * Now, update the completed cookie, and continue the |
| * next uncompleted transfer. |
| */ |
| update_cookie = 1; |
| xfer_ld_q = 1; |
| } |
| stat &= ~FSL_DMA_SR_PE; |
| } |
| |
| /* If the link descriptor segment transfer finishes, |
| * we will recycle the used descriptor. |
| */ |
| if (stat & FSL_DMA_SR_EOSI) { |
| dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n"); |
| dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n", |
| (unsigned long long)get_cdar(fsl_chan), |
| (unsigned long long)get_ndar(fsl_chan)); |
| stat &= ~FSL_DMA_SR_EOSI; |
| update_cookie = 1; |
| } |
| |
| /* For MPC8349, EOCDI event need to update cookie |
| * and start the next transfer if it exist. |
| */ |
| if (stat & FSL_DMA_SR_EOCDI) { |
| dev_dbg(fsl_chan->dev, "event: End-of-Chain link INT\n"); |
| stat &= ~FSL_DMA_SR_EOCDI; |
| update_cookie = 1; |
| xfer_ld_q = 1; |
| } |
| |
| /* If it current transfer is the end-of-transfer, |
| * we should clear the Channel Start bit for |
| * prepare next transfer. |
| */ |
| if (stat & FSL_DMA_SR_EOLNI) { |
| dev_dbg(fsl_chan->dev, "event: End-of-link INT\n"); |
| stat &= ~FSL_DMA_SR_EOLNI; |
| xfer_ld_q = 1; |
| } |
| |
| if (update_cookie) |
| fsl_dma_update_completed_cookie(fsl_chan); |
| if (xfer_ld_q) |
| fsl_chan_xfer_ld_queue(fsl_chan); |
| if (stat) |
| dev_dbg(fsl_chan->dev, "event: unhandled sr 0x%02x\n", |
| stat); |
| |
| dev_dbg(fsl_chan->dev, "event: Exit\n"); |
| tasklet_schedule(&fsl_chan->tasklet); |
| return IRQ_HANDLED; |
| } |
| |
| static void dma_do_tasklet(unsigned long data) |
| { |
| struct fsldma_chan *fsl_chan = (struct fsldma_chan *)data; |
| fsl_chan_ld_cleanup(fsl_chan); |
| } |
| |
| static irqreturn_t fsldma_ctrl_irq(int irq, void *data) |
| { |
| struct fsldma_device *fdev = data; |
| struct fsldma_chan *chan; |
| unsigned int handled = 0; |
| u32 gsr, mask; |
| int i; |
| |
| gsr = (fdev->feature & FSL_DMA_BIG_ENDIAN) ? in_be32(fdev->regs) |
| : in_le32(fdev->regs); |
| mask = 0xff000000; |
| dev_dbg(fdev->dev, "IRQ: gsr 0x%.8x\n", gsr); |
| |
| for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) { |
| chan = fdev->chan[i]; |
| if (!chan) |
| continue; |
| |
| if (gsr & mask) { |
| dev_dbg(fdev->dev, "IRQ: chan %d\n", chan->id); |
| fsldma_chan_irq(irq, chan); |
| handled++; |
| } |
| |
| gsr &= ~mask; |
| mask >>= 8; |
| } |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static void fsldma_free_irqs(struct fsldma_device *fdev) |
| { |
| struct fsldma_chan *chan; |
| int i; |
| |
| if (fdev->irq != NO_IRQ) { |
| dev_dbg(fdev->dev, "free per-controller IRQ\n"); |
| free_irq(fdev->irq, fdev); |
| return; |
| } |
| |
| for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) { |
| chan = fdev->chan[i]; |
| if (chan && chan->irq != NO_IRQ) { |
| dev_dbg(fdev->dev, "free channel %d IRQ\n", chan->id); |
| free_irq(chan->irq, chan); |
| } |
| } |
| } |
| |
| static int fsldma_request_irqs(struct fsldma_device *fdev) |
| { |
| struct fsldma_chan *chan; |
| int ret; |
| int i; |
| |
| /* if we have a per-controller IRQ, use that */ |
| if (fdev->irq != NO_IRQ) { |
| dev_dbg(fdev->dev, "request per-controller IRQ\n"); |
| ret = request_irq(fdev->irq, fsldma_ctrl_irq, IRQF_SHARED, |
| "fsldma-controller", fdev); |
| return ret; |
| } |
| |
| /* no per-controller IRQ, use the per-channel IRQs */ |
| for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) { |
| chan = fdev->chan[i]; |
| if (!chan) |
| continue; |
| |
| if (chan->irq == NO_IRQ) { |
| dev_err(fdev->dev, "no interrupts property defined for " |
| "DMA channel %d. Please fix your " |
| "device tree\n", chan->id); |
| ret = -ENODEV; |
| goto out_unwind; |
| } |
| |
| dev_dbg(fdev->dev, "request channel %d IRQ\n", chan->id); |
| ret = request_irq(chan->irq, fsldma_chan_irq, IRQF_SHARED, |
| "fsldma-chan", chan); |
| if (ret) { |
| dev_err(fdev->dev, "unable to request IRQ for DMA " |
| "channel %d\n", chan->id); |
| goto out_unwind; |
| } |
| } |
| |
| return 0; |
| |
| out_unwind: |
| for (/* none */; i >= 0; i--) { |
| chan = fdev->chan[i]; |
| if (!chan) |
| continue; |
| |
| if (chan->irq == NO_IRQ) |
| continue; |
| |
| free_irq(chan->irq, chan); |
| } |
| |
| return ret; |
| } |
| |
| /*----------------------------------------------------------------------------*/ |
| /* OpenFirmware Subsystem */ |
| /*----------------------------------------------------------------------------*/ |
| |
| static int __devinit fsl_dma_chan_probe(struct fsldma_device *fdev, |
| struct device_node *node, u32 feature, const char *compatible) |
| { |
| struct fsldma_chan *fchan; |
| struct resource res; |
| int err; |
| |
| /* alloc channel */ |
| fchan = kzalloc(sizeof(*fchan), GFP_KERNEL); |
| if (!fchan) { |
| dev_err(fdev->dev, "no free memory for DMA channels!\n"); |
| err = -ENOMEM; |
| goto out_return; |
| } |
| |
| /* ioremap registers for use */ |
| fchan->regs = of_iomap(node, 0); |
| if (!fchan->regs) { |
| dev_err(fdev->dev, "unable to ioremap registers\n"); |
| err = -ENOMEM; |
| goto out_free_fchan; |
| } |
| |
| err = of_address_to_resource(node, 0, &res); |
| if (err) { |
| dev_err(fdev->dev, "unable to find 'reg' property\n"); |
| goto out_iounmap_regs; |
| } |
| |
| fchan->feature = feature; |
| if (!fdev->feature) |
| fdev->feature = fchan->feature; |
| |
| /* |
| * If the DMA device's feature is different than the feature |
| * of its channels, report the bug |
| */ |
| WARN_ON(fdev->feature != fchan->feature); |
| |
| fchan->dev = fdev->dev; |
| fchan->id = ((res.start - 0x100) & 0xfff) >> 7; |
| if (fchan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) { |
| dev_err(fdev->dev, "too many channels for device\n"); |
| err = -EINVAL; |
| goto out_iounmap_regs; |
| } |
| |
| fdev->chan[fchan->id] = fchan; |
| tasklet_init(&fchan->tasklet, dma_do_tasklet, (unsigned long)fchan); |
| |
| /* Initialize the channel */ |
| dma_init(fchan); |
| |
| /* Clear cdar registers */ |
| set_cdar(fchan, 0); |
| |
| switch (fchan->feature & FSL_DMA_IP_MASK) { |
| case FSL_DMA_IP_85XX: |
| fchan->toggle_ext_pause = fsl_chan_toggle_ext_pause; |
| case FSL_DMA_IP_83XX: |
| fchan->toggle_ext_start = fsl_chan_toggle_ext_start; |
| fchan->set_src_loop_size = fsl_chan_set_src_loop_size; |
| fchan->set_dst_loop_size = fsl_chan_set_dst_loop_size; |
| fchan->set_request_count = fsl_chan_set_request_count; |
| } |
| |
| spin_lock_init(&fchan->desc_lock); |
| INIT_LIST_HEAD(&fchan->ld_queue); |
| |
| fchan->common.device = &fdev->common; |
| |
| /* find the IRQ line, if it exists in the device tree */ |
| fchan->irq = irq_of_parse_and_map(node, 0); |
| |
| /* Add the channel to DMA device channel list */ |
| list_add_tail(&fchan->common.device_node, &fdev->common.channels); |
| fdev->common.chancnt++; |
| |
| dev_info(fdev->dev, "#%d (%s), irq %d\n", fchan->id, compatible, |
| fchan->irq != NO_IRQ ? fchan->irq : fdev->irq); |
| |
| return 0; |
| |
| out_iounmap_regs: |
| iounmap(fchan->regs); |
| out_free_fchan: |
| kfree(fchan); |
| out_return: |
| return err; |
| } |
| |
| static void fsl_dma_chan_remove(struct fsldma_chan *fchan) |
| { |
| irq_dispose_mapping(fchan->irq); |
| list_del(&fchan->common.device_node); |
| iounmap(fchan->regs); |
| kfree(fchan); |
| } |
| |
| static int __devinit fsldma_of_probe(struct of_device *op, |
| const struct of_device_id *match) |
| { |
| struct fsldma_device *fdev; |
| struct device_node *child; |
| int err; |
| |
| fdev = kzalloc(sizeof(*fdev), GFP_KERNEL); |
| if (!fdev) { |
| dev_err(&op->dev, "No enough memory for 'priv'\n"); |
| err = -ENOMEM; |
| goto out_return; |
| } |
| |
| fdev->dev = &op->dev; |
| INIT_LIST_HEAD(&fdev->common.channels); |
| |
| /* ioremap the registers for use */ |
| fdev->regs = of_iomap(op->node, 0); |
| if (!fdev->regs) { |
| dev_err(&op->dev, "unable to ioremap registers\n"); |
| err = -ENOMEM; |
| goto out_free_fdev; |
| } |
| |
| /* map the channel IRQ if it exists, but don't hookup the handler yet */ |
| fdev->irq = irq_of_parse_and_map(op->node, 0); |
| |
| dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask); |
| dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask); |
| dma_cap_set(DMA_SLAVE, fdev->common.cap_mask); |
| fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources; |
| fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources; |
| fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt; |
| fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy; |
| fdev->common.device_is_tx_complete = fsl_dma_is_complete; |
| fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending; |
| fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg; |
| fdev->common.device_terminate_all = fsl_dma_device_terminate_all; |
| fdev->common.dev = &op->dev; |
| |
| dev_set_drvdata(&op->dev, fdev); |
| |
| /* |
| * We cannot use of_platform_bus_probe() because there is no |
| * of_platform_bus_remove(). Instead, we manually instantiate every DMA |
| * channel object. |
| */ |
| for_each_child_of_node(op->node, child) { |
| if (of_device_is_compatible(child, "fsl,eloplus-dma-channel")) { |
| fsl_dma_chan_probe(fdev, child, |
| FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN, |
| "fsl,eloplus-dma-channel"); |
| } |
| |
| if (of_device_is_compatible(child, "fsl,elo-dma-channel")) { |
| fsl_dma_chan_probe(fdev, child, |
| FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN, |
| "fsl,elo-dma-channel"); |
| } |
| } |
| |
| /* |
| * Hookup the IRQ handler(s) |
| * |
| * If we have a per-controller interrupt, we prefer that to the |
| * per-channel interrupts to reduce the number of shared interrupt |
| * handlers on the same IRQ line |
| */ |
| err = fsldma_request_irqs(fdev); |
| if (err) { |
| dev_err(fdev->dev, "unable to request IRQs\n"); |
| goto out_free_fdev; |
| } |
| |
| dma_async_device_register(&fdev->common); |
| return 0; |
| |
| out_free_fdev: |
| irq_dispose_mapping(fdev->irq); |
| kfree(fdev); |
| out_return: |
| return err; |
| } |
| |
| static int fsldma_of_remove(struct of_device *op) |
| { |
| struct fsldma_device *fdev; |
| unsigned int i; |
| |
| fdev = dev_get_drvdata(&op->dev); |
| dma_async_device_unregister(&fdev->common); |
| |
| fsldma_free_irqs(fdev); |
| |
| for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) { |
| if (fdev->chan[i]) |
| fsl_dma_chan_remove(fdev->chan[i]); |
| } |
| |
| iounmap(fdev->regs); |
| dev_set_drvdata(&op->dev, NULL); |
| kfree(fdev); |
| |
| return 0; |
| } |
| |
| static struct of_device_id fsldma_of_ids[] = { |
| { .compatible = "fsl,eloplus-dma", }, |
| { .compatible = "fsl,elo-dma", }, |
| {} |
| }; |
| |
| static struct of_platform_driver fsldma_of_driver = { |
| .name = "fsl-elo-dma", |
| .match_table = fsldma_of_ids, |
| .probe = fsldma_of_probe, |
| .remove = fsldma_of_remove, |
| }; |
| |
| /*----------------------------------------------------------------------------*/ |
| /* Module Init / Exit */ |
| /*----------------------------------------------------------------------------*/ |
| |
| static __init int fsldma_init(void) |
| { |
| int ret; |
| |
| pr_info("Freescale Elo / Elo Plus DMA driver\n"); |
| |
| ret = of_register_platform_driver(&fsldma_of_driver); |
| if (ret) |
| pr_err("fsldma: failed to register platform driver\n"); |
| |
| return ret; |
| } |
| |
| static void __exit fsldma_exit(void) |
| { |
| of_unregister_platform_driver(&fsldma_of_driver); |
| } |
| |
| subsys_initcall(fsldma_init); |
| module_exit(fsldma_exit); |
| |
| MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver"); |
| MODULE_LICENSE("GPL"); |