blob: ce6da0f2a9bfd6b0e3e13ff851b74b52e0bb5208 [file] [log] [blame]
/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <3>;
qcom,pm8226@0 {
spmi-slave-container;
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
qcom,power-on@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800 0x100>;
interrupts = <0x0 0x8 0x0>,
<0x0 0x8 0x1>,
<0x0 0x8 0x4>;
interrupt-names = "kpdpwr", "resin", "resin-bark";
qcom,pon-dbc-delay = <15625>;
qcom,system-reset;
qcom,pon_1 {
qcom,pon-type = <0>;
qcom,pull-up = <1>;
linux,code = <116>;
};
qcom,pon_2 {
qcom,pon-type = <1>;
qcom,support-reset = <1>;
qcom,pull-up = <1>;
qcom,s1-timer = <0>;
qcom,s2-timer = <2000>;
qcom,s2-type = <1>;
linux,code = <114>;
};
};
pm8226_chg: qcom,charger {
spmi-dev-container;
compatible = "qcom,qpnp-charger";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
qcom,chg-vddmax-mv = <4200>;
qcom,chg-vddsafe-mv = <4200>;
qcom,chg-vinmin-mv = <4200>;
qcom,chg-vbatdet-mv = <4100>;
qcom,chg-ibatmax-ma = <1500>;
qcom,chg-ibatterm-ma = <200>;
qcom,chg-ibatsafe-ma = <1500>;
qcom,chg-thermal-mitigation = <1500 700 600 325>;
qcom,chg-chgr@1000 {
status = "disabled";
reg = <0x1000 0x100>;
interrupts = <0x0 0x10 0x0>,
<0x0 0x10 0x1>,
<0x0 0x10 0x2>,
<0x0 0x10 0x3>,
<0x0 0x10 0x4>,
<0x0 0x10 0x5>,
<0x0 0x10 0x6>,
<0x0 0x10 0x7>;
interrupt-names = "vbat-det-lo",
"vbat-det-hi",
"chgwdog",
"state-change",
"trkl-chg-on",
"fast-chg-on",
"chg-failed",
"chg-done";
};
qcom,chg-buck@1100 {
status = "disabled";
reg = <0x1100 0x100>;
interrupts = <0x0 0x11 0x0>,
<0x0 0x11 0x1>,
<0x0 0x11 0x2>,
<0x0 0x11 0x3>,
<0x0 0x11 0x4>,
<0x0 0x11 0x5>,
<0x0 0x11 0x6>;
interrupt-names = "vbat-ov",
"vreg-ov",
"overtemp",
"vchg-loop",
"ichg-loop",
"ibat-loop",
"vdd-loop";
};
qcom,chg-bat-if@1200 {
status = "disabled";
reg = <0x1200 0x100>;
interrupts = <0x0 0x12 0x0>,
<0x0 0x12 0x1>,
<0x0 0x12 0x2>,
<0x0 0x12 0x3>,
<0x0 0x12 0x4>;
interrupt-names = "batt-pres",
"bat-temp-ok",
"bat-fet-on",
"vcp-on",
"psi";
};
qcom,chg-usb-chgpth@1300 {
status = "disabled";
reg = <0x1300 0x100>;
interrupts = <0 0x13 0x0>,
<0 0x13 0x1>,
<0x0 0x13 0x2>;
interrupt-names = "coarse-det-usb",
"usbin-valid",
"chg-gone";
};
qcom,chg-boost@1500 {
status = "disabled";
reg = <0x1500 0x100>;
interrupts = <0x0 0x15 0x0>,
<0x0 0x15 0x1>;
interrupt-names = "boost-pwr-ok",
"limit-error";
};
qcom,chg-misc@1600 {
status = "disabled";
reg = <0x1600 0x100>;
};
};
pm8226_bms: qcom,bms {
spmi-dev-container;
compatible = "qcom,qpnp-bms";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
qcom,r-sense-uohm = <10000>;
qcom,v-cutoff-uv = <3400000>;
qcom,max-voltage-uv = <4200000>;
qcom,r-conn-mohm = <18>;
qcom,shutdown-soc-valid-limit = <20>;
qcom,adjust-soc-low-threshold = <25>;
qcom,adjust-soc-high-threshold = <45>;
qcom,ocv-voltage-high-threshold-uv = <3750000>;
qcom,ocv-voltage-low-threshold-uv = <3650000>;
qcom,low-soc-calculate-soc-threshold = <15>;
qcom,low-soc-calculate-soc-ms = <5000>;
qcom,calculate-soc-ms = <20000>;
qcom,chg-term-ua = <100000>;
qcom,batt-type = <0>;
qcom,bms-iadc@3800 {
reg = <0x3800 0x100>;
};
qcom,bms-bms@4000 {
reg = <0x4000 0x100>;
interrupts = <0x0 0x40 0x0>,
<0x0 0x40 0x1>,
<0x0 0x40 0x2>,
<0x0 0x40 0x3>,
<0x0 0x40 0x4>,
<0x0 0x40 0x5>,
<0x0 0x40 0x6>,
<0x0 0x40 0x7>;
interrupt-names = "vsense_for_r",
"vsense_avg",
"sw_cc_thr",
"ocv_thr",
"charge_begin",
"good_ocv",
"ocv_for_r",
"cc_thr";
};
};
pm8226_gpios: gpios {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pm8226-gpio";
gpio@c000 {
reg = <0xc000 0x100>;
qcom,pin-num = <1>;
};
gpio@c100 {
reg = <0xc100 0x100>;
qcom,pin-num = <2>;
};
gpio@c200 {
reg = <0xc200 0x100>;
qcom,pin-num = <3>;
};
gpio@c300 {
reg = <0xc300 0x100>;
qcom,pin-num = <4>;
};
gpio@c400 {
reg = <0xc400 0x100>;
qcom,pin-num = <5>;
};
gpio@c500 {
reg = <0xc500 0x100>;
qcom,pin-num = <6>;
};
gpio@c600 {
reg = <0xc600 0x100>;
qcom,pin-num = <7>;
};
gpio@c700 {
reg = <0xc700 0x100>;
qcom,pin-num = <8>;
};
};
pm8226_mpps: mpps {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pm8226-mpp";
mpp@a000 {
reg = <0xa000 0x100>;
qcom,pin-num = <1>;
};
mpp@a100 {
reg = <0xa100 0x100>;
qcom,pin-num = <2>;
};
mpp@a200 {
reg = <0xa200 0x100>;
qcom,pin-num = <3>;
};
mpp@a300 {
reg = <0xa300 0x100>;
qcom,pin-num = <4>;
};
mpp@a400 {
reg = <0xa400 0x100>;
qcom,pin-num = <5>;
};
mpp@a500 {
reg = <0xa500 0x100>;
qcom,pin-num = <6>;
};
mpp@a600 {
reg = <0xa600 0x100>;
qcom,pin-num = <7>;
};
mpp@a700 {
reg = <0xa700 0x100>;
qcom,pin-num = <8>;
};
};
pm8226_vadc: vadc@3100 {
compatible = "qcom,qpnp-vadc";
reg = <0x3100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x31 0x0>;
interrupt-names = "eoc-int-en-set";
qcom,adc-bit-resolution = <15>;
qcom,adc-vdd-reference = <1800>;
chan@8 {
label = "die_temp";
reg = <8>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <3>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@9 {
label = "ref_625mv";
reg = <9>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@a {
label = "ref_1250v";
reg = <0xa>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
};
iadc@3600 {
compatible = "qcom,qpnp-iadc";
reg = <0x3600 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x36 0x0>;
interrupt-names = "eoc-int-en-set";
qcom,adc-bit-resolution = <16>;
qcom,adc-vdd-reference = <1800>;
qcom,rsense = <1500>;
chan@0 {
label = "internal_rsense";
reg = <0>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
};
qcom,pm8226_rtc {
spmi-dev-container;
compatible = "qcom,qpnp-rtc";
#address-cells = <1>;
#size-cells = <1>;
qcom,qpnp-rtc-write = <0>;
qcom,qpnp-rtc-alarm-pwrup = <0>;
qcom,pm8226_rtc_rw@6000 {
reg = <0x6000 0x100>;
};
qcom,pm8226_rtc_alarm@6100 {
reg = <0x6100 0x100>;
interrupts = <0x0 0x61 0x1>;
};
};
};
qcom,pm8226@1 {
spmi-slave-container;
reg = <0x1>;
#address-cells = <1>;
#size-cells = <1>;
regulator@1400 {
regulator-name = "8226_s1";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1400 0x300>;
status = "disabled";
qcom,ctl@1400 {
reg = <0x1400 0x100>;
};
qcom,ps@1500 {
reg = <0x1500 0x100>;
};
qcom,freq@1600 {
reg = <0x1600 0x100>;
};
};
regulator@1700 {
regulator-name = "8226_s2";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1700 0x300>;
status = "disabled";
qcom,ctl@1700 {
reg = <0x1700 0x100>;
};
qcom,ps@1800 {
reg = <0x1800 0x100>;
};
qcom,freq@1900 {
reg = <0x1900 0x100>;
};
};
regulator@1a00 {
regulator-name = "8226_s3";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1a00 0x300>;
status = "disabled";
qcom,ctl@1a00 {
reg = <0x1a00 0x100>;
};
qcom,ps@1b00 {
reg = <0x1b00 0x100>;
};
qcom,freq@1c00 {
reg = <0x1c00 0x100>;
};
};
regulator@1d00 {
regulator-name = "8226_s4";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1d00 0x300>;
status = "disabled";
qcom,ctl@1d00 {
reg = <0x1d00 0x100>;
};
qcom,ps@1e00 {
reg = <0x1e00 0x100>;
};
qcom,freq@1f00 {
reg = <0x1f00 0x100>;
};
};
regulator@2000 {
regulator-name = "8226_s5";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2000 0x300>;
status = "disabled";
qcom,ctl@2000 {
reg = <0x2000 0x100>;
};
qcom,ps@2100 {
reg = <0x2100 0x100>;
};
qcom,freq@2200 {
reg = <0x2200 0x100>;
};
};
regulator@4000 {
regulator-name = "8226_l1";
reg = <0x4000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4100 {
regulator-name = "8226_l2";
reg = <0x4100 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4200 {
regulator-name = "8226_l3";
reg = <0x4200 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4300 {
regulator-name = "8226_l4";
reg = <0x4300 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4400 {
regulator-name = "8226_l5";
reg = <0x4400 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4500 {
regulator-name = "8226_l6";
reg = <0x4500 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4600 {
regulator-name = "8226_l7";
reg = <0x4600 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4700 {
regulator-name = "8226_l8";
reg = <0x4700 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4800 {
regulator-name = "8226_l9";
reg = <0x4800 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4900 {
regulator-name = "8226_l10";
reg = <0x4900 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4b00 {
regulator-name = "8226_l12";
reg = <0x4b00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4d00 {
regulator-name = "8226_l14";
reg = <0x4d00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4e00 {
regulator-name = "8226_l15";
reg = <0x4e00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4f00 {
regulator-name = "8226_l16";
reg = <0x4f00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5000 {
regulator-name = "8226_l17";
reg = <0x5000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5100 {
regulator-name = "8226_l18";
reg = <0x5100 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5200 {
regulator-name = "8226_l19";
reg = <0x5200 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5300 {
regulator-name = "8226_l20";
reg = <0x5300 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5400 {
regulator-name = "8226_l21";
reg = <0x5400 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5500 {
regulator-name = "8226_l22";
reg = <0x5500 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5600 {
regulator-name = "8226_l23";
reg = <0x5600 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5700 {
regulator-name = "8226_l24";
reg = <0x5700 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5900 {
regulator-name = "8226_l26";
reg = <0x5900 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5a00 {
regulator-name = "8226_l27";
reg = <0x5a00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5b00 {
regulator-name = "8226_l28";
reg = <0x5b00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
qcom,leds@d800 {
compatible = "qcom,leds-qpnp";
reg = <0xd800 0x100>;
label = "wled";
};
regulator@8000 {
regulator-name = "8226_lvs1";
reg = <0x8000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
};
};