[ALSA] ad1848/cs4231: replace commented out debug code with snd-printd{,d}
While I'm at it another 'while I'm there' -- replace commented out debug
code with snd-printd{,d}.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/isa/ad1848/ad1848_lib.c b/sound/isa/ad1848/ad1848_lib.c
index c10dfc1..eee941b 100644
--- a/sound/isa/ad1848/ad1848_lib.c
+++ b/sound/isa/ad1848/ad1848_lib.c
@@ -213,13 +213,14 @@
/* end of cleanup sequence */
for (timeout = 12000; timeout > 0 && (inb(AD1848P(chip, REGSEL)) & AD1848_INIT); timeout--)
udelay(100);
-#if 0
- printk("(1) timeout = %i\n", timeout);
-#endif
+
+ snd_printdd("(1) timeout = %d\n", timeout);
+
#ifdef CONFIG_SND_DEBUG
if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT)
snd_printk(KERN_WARNING "mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL));
#endif
+
chip->mce_bit &= ~AD1848_MCE;
timeout = inb(AD1848P(chip, REGSEL));
outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL));
@@ -236,9 +237,9 @@
* which at the slowest possible rate of 5.5125 kHz means 907 us.
*/
msleep(1);
-#if 0
- printk("(2) jiffies = %li\n", jiffies);
-#endif
+
+ snd_printdd("(2) jiffies = %lu\n", jiffies);
+
time = msecs_to_jiffies(250);
while (snd_ad1848_in(chip, AD1848_TEST_INIT) & AD1848_CALIB_IN_PROGRESS) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
@@ -249,9 +250,9 @@
time = schedule_timeout(time);
spin_lock_irqsave(&chip->reg_lock, flags);
}
-#if 0
- printk("(3) jiffies = %li\n", jiffies);
-#endif
+
+ snd_printdd("(3) jiffies = %lu\n", jiffies);
+
time = msecs_to_jiffies(100);
while (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
@@ -263,10 +264,9 @@
spin_lock_irqsave(&chip->reg_lock, flags);
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
-#if 0
- printk("(4) jiffies = %li\n", jiffies);
- snd_printk("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL)));
-#endif
+
+ snd_printdd("(4) jiffies = %lu\n", jiffies);
+ snd_printd("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL)));
}
static unsigned int snd_ad1848_get_count(unsigned char format,
diff --git a/sound/isa/cs423x/cs4231_lib.c b/sound/isa/cs423x/cs4231_lib.c
index 0e604bf..c0ffb20 100644
--- a/sound/isa/cs423x/cs4231_lib.c
+++ b/sound/isa/cs423x/cs4231_lib.c
@@ -316,9 +316,7 @@
int timeout;
snd_cs4231_busy_wait(chip);
-#if 0
- printk("(1) timeout = %i\n", timeout);
-#endif
+
#ifdef CONFIG_SND_DEBUG
if (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
snd_printk("mce_down [0x%lx] - auto calibration time out (0)\n", (long)CS4231P(REGSEL));
@@ -342,9 +340,9 @@
* which at the slowest possible rate of 5.5125 kHz means 907 us.
*/
msleep(1);
-#if 0
- printk("(2) jiffies = %li\n", jiffies);
-#endif
+
+ snd_printdd("(1) jiffies = %lu\n", jiffies);
+
/* in 10 ms increments, check condition, up to 250 ms */
timeout = 25;
while (snd_cs4231_in(chip, CS4231_TEST_INIT) & CS4231_CALIB_IN_PROGRESS) {
@@ -354,9 +352,9 @@
}
msleep(10);
}
-#if 0
- printk("(3) jiffies = %li\n", jiffies);
-#endif
+
+ snd_printdd("(2) jiffies = %lu\n", jiffies);
+
/* in 10 ms increments, check condition, up to 100 ms */
timeout = 10;
while (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) {
@@ -366,10 +364,9 @@
}
msleep(10);
}
-#if 0
- printk("(4) jiffies = %li\n", jiffies);
- snd_printk("mce_down - exit = 0x%x\n", cs4231_inb(chip, CS4231P(REGSEL)));
-#endif
+
+ snd_printdd("(3) jiffies = %lu\n", jiffies);
+ snd_printd("mce_down - exit = 0x%x\n", cs4231_inb(chip, CS4231P(REGSEL)));
}
static unsigned int snd_cs4231_get_count(unsigned char format, unsigned int size)