hwmon: (dme1737) Add support for in7 for SCH5127
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.
Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index fc5df76..4d29351 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -42,7 +42,7 @@
This driver implements support for the hardware monitoring capabilities of the
SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
-temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
+temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
automatically.
@@ -105,6 +105,7 @@
in4: V1_IN 0V - 1.5V
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
+ in7: Vtrip (+1.5V) 0V - 1.99V
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
@@ -217,10 +218,10 @@
vrm RW Voltage regulator module version
number.
-in[0-6]_input RO Measured voltage in millivolts.
-in[0-6]_min RW Low limit for voltage input.
-in[0-6]_max RW High limit for voltage input.
-in[0-6]_alarm RO Voltage input alarm. Returns 1 if
+in[0-7]_input RO Measured voltage in millivolts.
+in[0-7]_min RW Low limit for voltage input.
+in[0-7]_max RW High limit for voltage input.
+in[0-7]_alarm RO Voltage input alarm. Returns 1 if
voltage input is or went outside the
associated min-max range, 0 otherwise.
@@ -324,3 +325,4 @@
pwm5 opt opt
fan6 opt opt
pwm6 opt opt
+in7 yes
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index e9a610b..ec683ea 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -77,12 +77,14 @@
* in4 +12V
* in5 VTR (+3.3V stby)
* in6 Vbat
+ * in7 Vtrip (sch5127 only)
*
* --------------------------------------------------------------------- */
-/* Voltages (in) numbered 0-6 (ix) */
-#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) \
- : 0x94 + (ix))
+/* Voltages (in) numbered 0-7 (ix) */
+#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) : \
+ (ix) < 7 ? 0x94 + (ix) : \
+ 0x1f)
#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \
: 0x91 + (ix) * 2)
#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \
@@ -101,10 +103,11 @@
* IN_TEMP_LSB(1) = [temp3, temp1]
* IN_TEMP_LSB(2) = [in4, temp2]
* IN_TEMP_LSB(3) = [in3, in0]
- * IN_TEMP_LSB(4) = [in2, in1] */
+ * IN_TEMP_LSB(4) = [in2, in1]
+ * IN_TEMP_LSB(5) = [res, in7] */
#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix))
-static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
-static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
+static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5};
+static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4};
static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
@@ -145,7 +148,7 @@
#define DME1737_REG_ALARM1 0x41
#define DME1737_REG_ALARM2 0x42
#define DME1737_REG_ALARM3 0x83
-static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
+static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18};
static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
@@ -190,6 +193,7 @@
#define HAS_PWM_MIN (1 << 4) /* bit 4 */
#define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */
#define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */
+#define HAS_IN7 (1 << 17) /* bit 17 */
/* ---------------------------------------------------------------------
* Data structures and manipulation thereof
@@ -213,9 +217,9 @@
u32 has_features;
/* Register values */
- u16 in[7];
- u8 in_min[7];
- u8 in_max[7];
+ u16 in[8];
+ u8 in_min[8];
+ u8 in_max[8];
s16 temp[3];
s8 temp_min[3];
s8 temp_max[3];
@@ -247,7 +251,7 @@
static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
3300};
static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
- 3300};
+ 3300, 1500};
#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \
(type) == sch5027 ? IN_NOMINAL_SCH5027 : \
(type) == sch5127 ? IN_NOMINAL_SCH5127 : \
@@ -580,7 +584,7 @@
{
struct dme1737_data *data = dev_get_drvdata(dev);
int ix;
- u8 lsb[5];
+ u8 lsb[6];
mutex_lock(&data->update_lock);
@@ -603,6 +607,9 @@
/* Voltage inputs are stored as 16 bit values even
* though they have only 12 bits resolution. This is
* to make it consistent with the temp inputs. */
+ if (ix == 7 && !(data->has_features & HAS_IN7)) {
+ continue;
+ }
data->in[ix] = dme1737_read(data,
DME1737_REG_IN(ix)) << 8;
data->in_min[ix] = dme1737_read(data,
@@ -635,10 +642,16 @@
* which the registers are read (MSB first, then LSB) is
* important! */
for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
+ if (ix == 5 && !(data->has_features & HAS_IN7)) {
+ continue;
+ }
lsb[ix] = dme1737_read(data,
DME1737_REG_IN_TEMP_LSB(ix));
}
for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+ if (ix == 7 && !(data->has_features & HAS_IN7)) {
+ continue;
+ }
data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
}
@@ -762,7 +775,7 @@
/* ---------------------------------------------------------------------
* Voltage sysfs attributes
- * ix = [0-5]
+ * ix = [0-7]
* --------------------------------------------------------------------- */
#define SYS_IN_INPUT 0
@@ -1439,7 +1452,7 @@
* Sysfs device attribute defines and structs
* --------------------------------------------------------------------- */
-/* Voltages 0-6 */
+/* Voltages 0-7 */
#define SENSOR_DEVICE_ATTR_IN(ix) \
static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
@@ -1458,6 +1471,7 @@
SENSOR_DEVICE_ATTR_IN(4);
SENSOR_DEVICE_ATTR_IN(5);
SENSOR_DEVICE_ATTR_IN(6);
+SENSOR_DEVICE_ATTR_IN(7);
/* Temperatures 1-3 */
@@ -1695,6 +1709,21 @@
.attrs = dme1737_zone_hyst_attr,
};
+/* The following struct holds voltage in7 related attributes, which
+ * are not available in all chips. The following chips support them:
+ * SCH5127 */
+static struct attribute *dme1737_in7_attr[] = {
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_in7_group = {
+ .attrs = dme1737_in7_attr,
+};
+
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
@@ -1986,6 +2015,9 @@
if (data->has_features & HAS_ZONE_HYST) {
sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
}
+ if (data->has_features & HAS_IN7) {
+ sysfs_remove_group(&dev->kobj, &dme1737_in7_group);
+ }
sysfs_remove_group(&dev->kobj, &dme1737_group);
if (!data->client) {
@@ -2030,6 +2062,12 @@
&dme1737_zone_hyst_group))) {
goto exit_remove;
}
+ if (data->has_features & HAS_IN7) {
+ err = sysfs_create_group(&dev->kobj, &dme1737_in7_group);
+ if (err) {
+ goto exit_remove;
+ }
+ }
/* Create fan sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
@@ -2188,7 +2226,7 @@
data->has_features |= HAS_ZONE3;
break;
case sch5127:
- data->has_features |= HAS_FAN(2) | HAS_PWM(2);
+ data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7;
break;
default:
break;