Merge branch 'imx/cleanup' into next/cleanup
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3146ed3..9277237 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -29,6 +29,7 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select GENERIC_IRQ_SHOW
+ select CPU_PM if (SUSPEND || CPU_IDLE)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -830,6 +831,7 @@
select HAVE_SCHED_CLOCK
select HAVE_TCM
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
@@ -1807,6 +1809,38 @@
endchoice
+config ARM_APPENDED_DTB
+ bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+ depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+ help
+ With this option, the boot code will look for a device tree binary
+ (DTB) appended to zImage
+ (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to zImage. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB. Proper passing of the
+ location into r2 of a bootloader provided DTB is always preferable
+ to this option.
+
+config ARM_ATAG_DTB_COMPAT
+ bool "Supplement the appended DTB with traditional ATAG information"
+ depends on ARM_APPENDED_DTB
+ help
+ Some old bootloaders can't be updated to a DTB capable one, yet
+ they provide ATAGs with memory configuration, the ramdisk address,
+ the kernel cmdline string, etc. Such information is dynamically
+ provided by the bootloader and can't always be stored in a static
+ DTB. To allow a device tree enabled kernel to be used with such
+ bootloaders, this option allows zImage to extract the information
+ from the ATAG list and store it at run time into the appended DTB.
+
config CMDLINE
string "Default kernel command string"
default ""
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 81cbe40..be3a0f7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -129,4 +129,10 @@
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+config ARM_KPROBES_TEST
+ tristate "Kprobes test module"
+ depends on KPROBES && MODULES
+ help
+ Perform tests of kprobes API and instruction set simulation.
+
endmenu
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index c602896..e0936a1 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -5,3 +5,12 @@
piggy.lzma
vmlinux
vmlinux.lds
+
+# borrowed libfdt files
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0c74a6f..e4f32a8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -26,6 +26,10 @@
OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
+# string library code (-Os is enforced to keep it much smaller)
+OBJS += string.o
+CFLAGS_string.o := -Os
+
#
# Architecture dependencies
#
@@ -89,21 +93,41 @@
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+# Borrowed libfdt files for the ATAG compatibility mode
+
+libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
+libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h
+
+libfdt_objs := $(addsuffix .o, $(basename $(libfdt)))
+
+$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,shipped)
+
+$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
+ $(addprefix $(obj)/,$(libfdt_hdrs))
+
+ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+OBJS += $(libfdt_objs) atags_to_fdt.o
+endif
+
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- font.o font.c head.o misc.o $(OBJS)
+ lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
-ccflags-y := -fpic -fno-builtin
+ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
+# Supply kernel BSS size to the decompressor via a linker symbol.
+KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -123,7 +147,7 @@
# For __aeabi_uidivmod
lib1funcs = $(obj)/lib1funcs.o
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
$(call cmd,shipped)
# We need to prevent any GOTOFF relocs being used with references
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
new file mode 100644
index 0000000..6ce11c4
--- /dev/null
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -0,0 +1,97 @@
+#include <asm/setup.h>
+#include <libfdt.h>
+
+static int node_offset(void *fdt, const char *node_path)
+{
+ int offset = fdt_path_offset(fdt, node_path);
+ if (offset == -FDT_ERR_NOTFOUND)
+ offset = fdt_add_subnode(fdt, 0, node_path);
+ return offset;
+}
+
+static int setprop(void *fdt, const char *node_path, const char *property,
+ uint32_t *val_array, int size)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop(fdt, offset, property, val_array, size);
+}
+
+static int setprop_string(void *fdt, const char *node_path,
+ const char *property, const char *string)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_string(fdt, offset, property, string);
+}
+
+static int setprop_cell(void *fdt, const char *node_path,
+ const char *property, uint32_t val)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_cell(fdt, offset, property, val);
+}
+
+/*
+ * Convert and fold provided ATAGs into the provided FDT.
+ *
+ * REturn values:
+ * = 0 -> pretend success
+ * = 1 -> bad ATAG (may retry with another possible ATAG pointer)
+ * < 0 -> error from libfdt
+ */
+int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+{
+ struct tag *atag = atag_list;
+ uint32_t mem_reg_property[2 * NR_BANKS];
+ int memcount = 0;
+ int ret;
+
+ /* make sure we've got an aligned pointer */
+ if ((u32)atag_list & 0x3)
+ return 1;
+
+ /* if we get a DTB here we're done already */
+ if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+ return 0;
+
+ /* validate the ATAG */
+ if (atag->hdr.tag != ATAG_CORE ||
+ (atag->hdr.size != tag_size(tag_core) &&
+ atag->hdr.size != 2))
+ return 1;
+
+ /* let's give it all the room it could need */
+ ret = fdt_open_into(fdt, fdt, total_space);
+ if (ret < 0)
+ return ret;
+
+ for_each_tag(atag, atag_list) {
+ if (atag->hdr.tag == ATAG_CMDLINE) {
+ setprop_string(fdt, "/chosen", "bootargs",
+ atag->u.cmdline.cmdline);
+ } else if (atag->hdr.tag == ATAG_MEM) {
+ if (memcount >= sizeof(mem_reg_property)/4)
+ continue;
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+ } else if (atag->hdr.tag == ATAG_INITRD2) {
+ uint32_t initrd_start, initrd_size;
+ initrd_start = atag->u.initrd.start;
+ initrd_size = atag->u.initrd.size;
+ setprop_cell(fdt, "/chosen", "linux,initrd-start",
+ initrd_start);
+ setprop_cell(fdt, "/chosen", "linux,initrd-end",
+ initrd_start + initrd_size);
+ }
+ }
+
+ if (memcount)
+ setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+
+ return fdt_pack(fdt);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index e95a598..9f5ac11 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -216,6 +216,103 @@
mov r10, r6
#endif
+ mov r5, #0 @ init dtb size to 0
+#ifdef CONFIG_ARM_APPENDED_DTB
+/*
+ * r0 = delta
+ * r2 = BSS start
+ * r3 = BSS end
+ * r4 = final kernel address
+ * r5 = appended dtb size (still unknown)
+ * r6 = _edata
+ * r7 = architecture ID
+ * r8 = atags/device tree pointer
+ * r9 = size of decompressed image
+ * r10 = end of this image, including bss/stack/malloc space if non XIP
+ * r11 = GOT start
+ * r12 = GOT end
+ * sp = stack pointer
+ *
+ * if there are device trees (dtb) appended to zImage, advance r10 so that the
+ * dtb data will get relocated along with the kernel if necessary.
+ */
+
+ ldr lr, [r6, #0]
+#ifndef __ARMEB__
+ ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
+#else
+ ldr r1, =0xd00dfeed
+#endif
+ cmp lr, r1
+ bne dtb_check_done @ not found
+
+#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
+ /*
+ * OK... Let's do some funky business here.
+ * If we do have a DTB appended to zImage, and we do have
+ * an ATAG list around, we want the later to be translated
+ * and folded into the former here. To be on the safe side,
+ * let's temporarily move the stack away into the malloc
+ * area. No GOT fixup has occurred yet, but none of the
+ * code we're about to call uses any global variable.
+ */
+ add sp, sp, #0x10000
+ stmfd sp!, {r0-r3, ip, lr}
+ mov r0, r8
+ mov r1, r6
+ sub r2, sp, r6
+ bl atags_to_fdt
+
+ /*
+ * If returned value is 1, there is no ATAG at the location
+ * pointed by r8. Try the typical 0x100 offset from start
+ * of RAM and hope for the best.
+ */
+ cmp r0, #1
+ sub r0, r4, #(TEXT_OFFSET - 0x100)
+ mov r1, r6
+ sub r2, sp, r6
+ blne atags_to_fdt
+
+ ldmfd sp!, {r0-r3, ip, lr}
+ sub sp, sp, #0x10000
+#endif
+
+ mov r8, r6 @ use the appended device tree
+
+ /*
+ * Make sure that the DTB doesn't end up in the final
+ * kernel's .bss area. To do so, we adjust the decompressed
+ * kernel size to compensate if that .bss size is larger
+ * than the relocated code.
+ */
+ ldr r5, =_kernel_bss_size
+ adr r1, wont_overwrite
+ sub r1, r6, r1
+ subs r1, r5, r1
+ addhi r9, r9, r1
+
+ /* Get the dtb's size */
+ ldr r5, [r6, #4]
+#ifndef __ARMEB__
+ /* convert r5 (dtb size) to little endian */
+ eor r1, r5, r5, ror #16
+ bic r1, r1, #0x00ff0000
+ mov r5, r5, ror #8
+ eor r5, r5, r1, lsr #8
+#endif
+
+ /* preserve 64-bit alignment */
+ add r5, r5, #7
+ bic r5, r5, #7
+
+ /* relocate some pointers past the appended dtb */
+ add r6, r6, r5
+ add r10, r10, r5
+ add sp, sp, r5
+dtb_check_done:
+#endif
+
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
@@ -223,15 +320,14 @@
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 - 16k page directory >= r10 -> OK
- * r4 + image length <= current position (pc) -> OK
+ * r4 + image length <= address of wont_overwrite -> OK
*/
add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
- ARM( cmp r10, pc )
- THUMB( mov lr, pc )
- THUMB( cmp r10, lr )
+ adr r9, wont_overwrite
+ cmp r10, r9
bls wont_overwrite
/*
@@ -285,14 +381,16 @@
* r2 = BSS start
* r3 = BSS end
* r4 = kernel execution address
+ * r5 = appended dtb size (0 if not present)
* r7 = architecture ID
* r8 = atags pointer
* r11 = GOT start
* r12 = GOT end
* sp = stack pointer
*/
- teq r0, #0
+ orrs r1, r0, r5
beq not_relocated
+
add r11, r11, r0
add r12, r12, r0
@@ -307,12 +405,21 @@
/*
* Relocate all entries in the GOT table.
+ * Bump bss entries to _edata + dtb size
*/
1: ldr r1, [r11, #0] @ relocate entries in the GOT
- add r1, r1, r0 @ table. This fixes up the
- str r1, [r11], #4 @ C references.
+ add r1, r1, r0 @ This fixes up C references
+ cmp r1, r2 @ if entry >= bss_start &&
+ cmphs r3, r1 @ bss_end > entry
+ addhi r1, r1, r5 @ entry += dtb size
+ str r1, [r11], #4 @ next entry
cmp r11, r12
blo 1b
+
+ /* bump our bss pointers too */
+ add r2, r2, r5
+ add r3, r3, r5
+
#else
/*
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
new file mode 100644
index 0000000..1f4e718
--- /dev/null
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -0,0 +1,15 @@
+#ifndef _ARM_LIBFDT_ENV_H
+#define _ARM_LIBFDT_ENV_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#define fdt16_to_cpu(x) be16_to_cpu(x)
+#define cpu_to_fdt16(x) cpu_to_be16(x)
+#define fdt32_to_cpu(x) be32_to_cpu(x)
+#define cpu_to_fdt32(x) cpu_to_be32(x)
+#define fdt64_to_cpu(x) be64_to_cpu(x)
+#define cpu_to_fdt64(x) cpu_to_be64(x)
+
+#endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 832d372..8e2a8fc 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,14 +18,9 @@
unsigned int __machine_arch_type;
-#define _LINUX_STRING_H_
-
#include <linux/compiler.h> /* for inline */
-#include <linux/types.h> /* for size_t */
-#include <linux/stddef.h> /* for NULL */
+#include <linux/types.h>
#include <linux/linkage.h>
-#include <asm/string.h>
-
static void putstr(const char *ptr);
extern void error(char *x);
@@ -101,41 +96,6 @@
flush();
}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i = 0;
- unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
-
- for (i = __n >> 3; i > 0; i--) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 2) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 1) {
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1)
- *d++ = *s++;
-
- return __dest;
-}
-
/*
* gzip declarations
*/
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
new file mode 100644
index 0000000..36e53ef
--- /dev/null
+++ b/arch/arm/boot/compressed/string.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/boot/compressed/string.c
+ *
+ * Small subset of simple string routines
+ */
+
+#include <linux/string.h>
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+ int i = 0;
+ unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+ for (i = __n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1)
+ *d++ = *s++;
+
+ return __dest;
+}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+ unsigned char *d = __dest;
+ const unsigned char *s = __src;
+
+ if (__dest == __src)
+ return __dest;
+
+ if (__dest < __src)
+ return memcpy(__dest, __src, count);
+
+ while (count--)
+ d[count] = s[count];
+ return __dest;
+}
+
+size_t strlen(const char *s)
+{
+ const char *sc = s;
+
+ while (*sc != '\0')
+ sc++;
+ return sc - s;
+}
+
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
+ int res = 0;
+
+ while (su1 < end) {
+ res = *su1++ - *su2++;
+ if (res)
+ break;
+ }
+ return res;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+ unsigned char c1, c2;
+ int res = 0;
+
+ do {
+ c1 = *cs++;
+ c2 = *ct++;
+ res = c1 - c2;
+ if (res)
+ break;
+ } while (c1);
+ return res;
+}
+
+void *memchr(const void *s, int c, size_t count)
+{
+ const unsigned char *p = s;
+
+ while (count--)
+ if ((unsigned char)c == *p++)
+ return (void *)(p - 1);
+ return NULL;
+}
+
+char *strchr(const char *s, int c)
+{
+ while (*s != (char)c)
+ if (*s++ == '\0')
+ return NULL;
+ return (char *)s;
+}
+
+#undef memset
+
+void *memset(void *s, int c, size_t count)
+{
+ char *xs = s;
+ while (count--)
+ *xs++ = c;
+ return s;
+}
+
+void __memzero(void *s, size_t count)
+{
+ memset(s, 0, count);
+}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 4e72883..4919f2a 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -51,6 +51,10 @@
_got_start = .;
.got : { *(.got) }
_got_end = .;
+
+ /* ensure the zImage file size is always a multiple of 64 bits */
+ /* (without a dummy byte, ld just ignores the empty section) */
+ .pad : { BYTE(0); . = ALIGN(8); }
_edata = .;
. = BSS_START;
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 3227ca9..734db99 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
@@ -276,6 +277,8 @@
if (gic_irqs > 1020)
gic_irqs = 1020;
+ gic->gic_irqs = gic_irqs;
+
/*
* Set all global interrupts to be level triggered, active low.
*/
@@ -343,6 +346,189 @@
writel_relaxed(1, base + GIC_CPU_CTRL);
}
+#ifdef CONFIG_CPU_PM
+/*
+ * Saves the GIC distributor registers during suspend or idle. Must be called
+ * with interrupts disabled but before powering down the GIC. After calling
+ * this function, no interrupts will be delivered by the GIC, and another
+ * platform-specific wakeup source must be enabled.
+ */
+static void gic_dist_save(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ void __iomem *dist_base;
+ int i;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ gic_data[gic_nr].saved_spi_conf[i] =
+ readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ gic_data[gic_nr].saved_spi_target[i] =
+ readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_enable[i] =
+ readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+}
+
+/*
+ * Restores the GIC distributor registers during resume or when coming out of
+ * idle. Must be called before enabling interrupts. If a level interrupt
+ * that occured while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occured will not be seen by
+ * the GIC and need to be handled by the platform-specific wakeup source.
+ */
+static void gic_dist_restore(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ unsigned int i;
+ void __iomem *dist_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ writel_relaxed(0, dist_base + GIC_DIST_CTRL);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
+ dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(0xa0a0a0a0,
+ dist_base + GIC_DIST_PRI + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
+ dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
+ dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ writel_relaxed(1, dist_base + GIC_DIST_CTRL);
+}
+
+static void gic_cpu_save(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+}
+
+static void gic_cpu_restore(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
+ writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+
+ writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+}
+
+static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+ int i;
+
+ for (i = 0; i < MAX_GIC_NR; i++) {
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ gic_cpu_save(i);
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ gic_cpu_restore(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER:
+ gic_dist_save(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ gic_dist_restore(i);
+ break;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gic_notifier_block = {
+ .notifier_call = gic_notifier,
+};
+
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+ gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_enable);
+
+ gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_conf);
+
+ cpu_pm_register_notifier(&gic_notifier_block);
+}
+#else
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+}
+#endif
+
void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
@@ -358,8 +544,10 @@
if (gic_nr == 0)
gic_cpu_base_addr = cpu_base;
+ gic_chip.flags |= gic_arch_extn.flags;
gic_dist_init(gic, irq_start);
gic_cpu_init(gic);
+ gic_pm_init(gic);
}
void __cpuinit gic_secondary_init(unsigned int gic_nr)
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 9f390ce..b5c9f5b 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -12,7 +12,12 @@
#endif
};
+struct omap_device;
+
struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+ struct omap_device *od;
+#endif
};
#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7a21d0b..7f27fab 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -205,6 +205,13 @@
int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
void *, dma_addr_t, size_t);
+/*
+ * This can be called during boot to increase the size of the consistent
+ * DMA region above it's default value of 2MB. It must be called before the
+ * memory allocator is initialised, i.e. before any core_initcall.
+ */
+extern void __init init_consistent_dma_size(unsigned long size);
+
#ifdef CONFIG_DMABOUNCE
/*
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..c562705 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -46,6 +46,14 @@
unsigned int irq_offset;
void __iomem *dist_base;
void __iomem *cpu_base;
+#ifdef CONFIG_CPU_PM
+ u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+ u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+ u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_conf;
+#endif
+ unsigned int gic_irqs;
};
#endif
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index f389b27..c190bc9 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -50,6 +50,7 @@
#define ARM_DEBUG_ARCH_V6_1 2
#define ARM_DEBUG_ARCH_V7_ECP14 3
#define ARM_DEBUG_ARCH_V7_MM 4
+#define ARM_DEBUG_ARCH_V7_1 5
/* Breakpoint */
#define ARM_BREAKPOINT_EXECUTE 0
@@ -57,6 +58,7 @@
/* Watchpoints */
#define ARM_BREAKPOINT_LOAD 1
#define ARM_BREAKPOINT_STORE 2
+#define ARM_FSR_ACCESS_MASK (1 << 11)
/* Privilege Levels */
#define ARM_BREAKPOINT_PRIV 1
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 217aa19..727da11 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,7 @@
struct machine_desc {
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
- unsigned long boot_params; /* tagged list */
+ unsigned long atag_offset; /* tagged list (relative) */
const char **dt_compat; /* array of device tree
* 'compatible' strings */
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index d2fedb5..b36f365 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -29,6 +29,7 @@
#define MT_MEMORY_NONCACHED 11
#define MT_MEMORY_DTCM 12
#define MT_MEMORY_ITCM 13
+#define MT_MEMORY_SO 14
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index b8de516..652fccc 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -77,16 +77,7 @@
*/
#define IOREMAP_MAX_ORDER 24
-/*
- * Size of DMA-consistent memory region. Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
#define CONSISTENT_END (0xffe00000UL)
-#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
#else /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 5750704..f1956b2 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -232,6 +232,9 @@
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_stronglyordered(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b7e82c4..71d99b8 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -13,7 +13,12 @@
#define __ARM_PMU_H__
#include <linux/interrupt.h>
+#include <linux/perf_event.h>
+/*
+ * Types of PMUs that can be accessed directly and require mutual
+ * exclusion between profiling tools.
+ */
enum arm_pmu_type {
ARM_PMU_DEVICE_CPU = 0,
ARM_NUM_PMU_DEVICES,
@@ -37,21 +42,17 @@
* reserve_pmu() - reserve the hardware performance counters
*
* Reserve the hardware performance counters in the system for exclusive use.
- * The platform_device for the system is returned on success, ERR_PTR()
- * encoded error on failure.
+ * Returns 0 on success or -EBUSY if the lock is already held.
*/
-extern struct platform_device *
+extern int
reserve_pmu(enum arm_pmu_type type);
/**
* release_pmu() - Relinquish control of the performance counters
*
* Release the performance counters and allow someone else to use them.
- * Callers must have disabled the counters and released IRQs before calling
- * this. The platform_device returned from reserve_pmu() must be passed as
- * a cookie.
*/
-extern int
+extern void
release_pmu(enum arm_pmu_type type);
/**
@@ -68,24 +69,78 @@
#include <linux/err.h>
-static inline struct platform_device *
+static inline int
reserve_pmu(enum arm_pmu_type type)
{
- return ERR_PTR(-ENODEV);
-}
-
-static inline int
-release_pmu(enum arm_pmu_type type)
-{
return -ENODEV;
}
-static inline int
-init_pmu(enum arm_pmu_type type)
-{
- return -ENODEV;
-}
+static inline void
+release_pmu(enum arm_pmu_type type) { }
#endif /* CONFIG_CPU_HAS_PMU */
+#ifdef CONFIG_HW_PERF_EVENTS
+
+/* The events for a given PMU register set. */
+struct pmu_hw_events {
+ /*
+ * The events that are active on the PMU for the given index.
+ */
+ struct perf_event **events;
+
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long *used_mask;
+
+ /*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+ raw_spinlock_t pmu_lock;
+};
+
+struct arm_pmu {
+ struct pmu pmu;
+ enum arm_perf_pmu_ids id;
+ enum arm_pmu_type type;
+ cpumask_t active_irqs;
+ const char *name;
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ void (*enable)(struct hw_perf_event *evt, int idx);
+ void (*disable)(struct hw_perf_event *evt, int idx);
+ int (*get_event_idx)(struct pmu_hw_events *hw_events,
+ struct hw_perf_event *hwc);
+ int (*set_event_filter)(struct hw_perf_event *evt,
+ struct perf_event_attr *attr);
+ u32 (*read_counter)(int idx);
+ void (*write_counter)(int idx, u32 val);
+ void (*start)(void);
+ void (*stop)(void);
+ void (*reset)(void *);
+ int (*map_event)(struct perf_event *event);
+ int num_events;
+ atomic_t active_events;
+ struct mutex reserve_mutex;
+ u64 max_period;
+ struct platform_device *plat_device;
+ struct pmu_hw_events *(*get_hw_events)(void);
+};
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+
+u64 armpmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx, int overflow);
+
+int armpmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx);
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 633d1cb..9e92cb2 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -81,6 +81,10 @@
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+/* These three are private to arch/arm/kernel/suspend.c */
+extern void cpu_do_suspend(void *);
+extern void cpu_do_resume(void *);
#else
#define cpu_proc_init processor._proc_init
#define cpu_proc_fin processor._proc_fin
@@ -89,6 +93,10 @@
#define cpu_dcache_clean_area processor.dcache_clean_area
#define cpu_set_pte_ext processor.set_pte_ext
#define cpu_do_switch_mm processor.switch_mm
+
+/* These three are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend processor.do_suspend
+#define cpu_do_resume processor.do_resume
#endif
extern void cpu_resume(void);
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index b0e4e1a..1c0a551 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -1,22 +1,7 @@
#ifndef __ASM_ARM_SUSPEND_H
#define __ASM_ARM_SUSPEND_H
-#include <asm/memory.h>
-#include <asm/tlbflush.h>
-
extern void cpu_resume(void);
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
- extern int __cpu_suspend(int, long, unsigned long,
- int (*)(unsigned long));
- int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
- flush_tlb_all();
- return ret;
-}
+extern int cpu_suspend(unsigned long, int (*)(unsigned long));
#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f7887dc..8fa83f5 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
-obj-$(CONFIG_PM_SLEEP) += sleep.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o suspend.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
@@ -43,6 +43,13 @@
else
obj-$(CONFIG_KPROBES) += kprobes-arm.o
endif
+obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o
+test-kprobes-objs := kprobes-test.o
+ifdef CONFIG_THUMB2_KERNEL
+test-kprobes-objs += kprobes-test-thumb.o
+else
+test-kprobes-objs += kprobes-test-arm.o
+endif
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a927ca1..5a46225 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -45,7 +45,6 @@
/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
-static int core_num_reserved_brps;
static int core_num_wrps;
/* Debug architecture version. */
@@ -137,10 +136,11 @@
u32 didr;
/* Do we implement the extended CPUID interface? */
- if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
- "CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n"))
+ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+ pr_warning("CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n");
return ARM_DEBUG_ARCH_V6;
+ }
ARM_DBG_READ(c0, 0, didr);
return (didr >> 16) & 0xf;
@@ -154,10 +154,21 @@
static int debug_arch_supported(void)
{
u8 arch = get_debug_arch();
- return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+
+ /* We don't support the memory-mapped interface. */
+ return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
+ arch >= ARM_DEBUG_ARCH_V7_1;
}
-/* Determine number of BRP register available. */
+/* Determine number of WRP registers available. */
+static int get_num_wrp_resources(void)
+{
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ return ((didr >> 28) & 0xf) + 1;
+}
+
+/* Determine number of BRP registers available. */
static int get_num_brp_resources(void)
{
u32 didr;
@@ -176,9 +187,10 @@
static int get_num_wrps(void)
{
/*
- * FIXME: When a watchpoint fires, the only way to work out which
- * watchpoint it was is by disassembling the faulting instruction
- * and working out the address of the memory access.
+ * On debug architectures prior to 7.1, when a watchpoint fires, the
+ * only way to work out which watchpoint it was is by disassembling
+ * the faulting instruction and working out the address of the memory
+ * access.
*
* Furthermore, we can only do this if the watchpoint was precise
* since imprecise watchpoints prevent us from calculating register
@@ -192,36 +204,17 @@
* [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
* that it is set on some implementations].
*/
+ if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
+ return 1;
-#if 0
- int wrps;
- u32 didr;
- ARM_DBG_READ(c0, 0, didr);
- wrps = ((didr >> 28) & 0xf) + 1;
-#endif
- int wrps = 1;
-
- if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
- wrps = get_num_brp_resources() - 1;
-
- return wrps;
-}
-
-/* We reserve one breakpoint for each watchpoint. */
-static int get_num_reserved_brps(void)
-{
- if (core_has_mismatch_brps())
- return get_num_wrps();
- return 0;
+ return get_num_wrp_resources();
}
/* Determine number of usable BRPs available. */
static int get_num_brps(void)
{
int brps = get_num_brp_resources();
- if (core_has_mismatch_brps())
- brps -= get_num_reserved_brps();
- return brps;
+ return core_has_mismatch_brps() ? brps - 1 : brps;
}
/*
@@ -239,7 +232,7 @@
/* Ensure that halting mode is disabled. */
if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
- "halting debug mode enabled. Unable to access hardware resources.\n")) {
+ "halting debug mode enabled. Unable to access hardware resources.\n")) {
ret = -EPERM;
goto out;
}
@@ -255,6 +248,7 @@
ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
break;
case ARM_DEBUG_ARCH_V7_ECP14:
+ case ARM_DEBUG_ARCH_V7_1:
ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
break;
default:
@@ -346,24 +340,10 @@
val_base = ARM_BASE_BVR;
slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
max_slots = core_num_brps;
- if (info->step_ctrl.enabled) {
- /* Override the breakpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- }
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled) {
- /* Install into the reserved breakpoint region. */
- ctrl_base = ARM_BASE_BCR + core_num_brps;
- val_base = ARM_BASE_BVR + core_num_brps;
- /* Override the watchpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- } else {
- ctrl_base = ARM_BASE_WCR;
- val_base = ARM_BASE_WVR;
- }
+ ctrl_base = ARM_BASE_WCR;
+ val_base = ARM_BASE_WVR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -382,6 +362,17 @@
goto out;
}
+ /* Override the breakpoint data with the step data. */
+ if (info->step_ctrl.enabled) {
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
+ i = 0;
+ ctrl_base = ARM_BASE_BCR + core_num_brps;
+ val_base = ARM_BASE_BVR + core_num_brps;
+ }
+ }
+
/* Setup the address register. */
write_wb_reg(val_base + i, addr);
@@ -405,10 +396,7 @@
max_slots = core_num_brps;
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled)
- base = ARM_BASE_BCR + core_num_brps;
- else
- base = ARM_BASE_WCR;
+ base = ARM_BASE_WCR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -426,6 +414,13 @@
if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
return;
+ /* Ensure that we disable the mismatch breakpoint. */
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
+ info->step_ctrl.enabled) {
+ i = 0;
+ base = ARM_BASE_BCR + core_num_brps;
+ }
+
/* Reset the control register. */
write_wb_reg(base + i, 0);
}
@@ -632,10 +627,9 @@
* we can use the mismatch feature as a poor-man's hardware
* single-step, but this only works for per-task breakpoints.
*/
- if (WARN_ONCE(!bp->overflow_handler &&
- (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
- || !bp->hw.bp_target),
- "overflow handler required but none found\n")) {
+ if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
+ !core_has_mismatch_brps() || !bp->hw.bp_target)) {
+ pr_warning("overflow handler required but none found\n");
ret = -EINVAL;
}
out:
@@ -666,34 +660,62 @@
arch_install_hw_breakpoint(bp);
}
-static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+static void watchpoint_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
{
- int i;
+ int i, access;
+ u32 val, ctrl_reg, alignment_mask;
struct perf_event *wp, **slots;
struct arch_hw_breakpoint *info;
+ struct arch_hw_breakpoint_ctrl ctrl;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- /* Without a disassembler, we can only handle 1 watchpoint. */
- BUG_ON(core_num_wrps > 1);
-
for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
- if (wp == NULL) {
- rcu_read_unlock();
- continue;
+ if (wp == NULL)
+ goto unlock;
+
+ info = counter_arch_bp(wp);
+ /*
+ * The DFAR is an unknown value on debug architectures prior
+ * to 7.1. Since we only allow a single watchpoint on these
+ * older CPUs, we can set the trigger to the lowest possible
+ * faulting address.
+ */
+ if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
+ BUG_ON(i > 0);
+ info->trigger = wp->attr.bp_addr;
+ } else {
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+ alignment_mask = 0x7;
+ else
+ alignment_mask = 0x3;
+
+ /* Check if the watchpoint value matches. */
+ val = read_wb_reg(ARM_BASE_WVR + i);
+ if (val != (addr & ~alignment_mask))
+ goto unlock;
+
+ /* Possible match, check the byte address select. */
+ ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+ decode_ctrl_reg(ctrl_reg, &ctrl);
+ if (!((1 << (addr & alignment_mask)) & ctrl.len))
+ goto unlock;
+
+ /* Check that the access type matches. */
+ access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+ HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+
+ /* We have a winner. */
+ info->trigger = addr;
}
- /*
- * The DFAR is an unknown value. Since we only allow a
- * single watchpoint, we can set the trigger to the lowest
- * possible faulting address.
- */
- info = counter_arch_bp(wp);
- info->trigger = wp->attr.bp_addr;
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
perf_bp_event(wp, regs);
@@ -705,6 +727,7 @@
if (!wp->overflow_handler)
enable_single_step(wp, instruction_pointer(regs));
+unlock:
rcu_read_unlock();
}
}
@@ -717,7 +740,7 @@
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- for (i = 0; i < core_num_reserved_brps; ++i) {
+ for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
@@ -820,7 +843,7 @@
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
- watchpoint_handler(addr, regs);
+ watchpoint_handler(addr, fsr, regs);
break;
default:
ret = 1; /* Unhandled fault. */
@@ -834,11 +857,31 @@
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *info)
+static cpumask_t debug_err_mask;
+
+static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
{
- int i, cpu = smp_processor_id();
+ int cpu = smp_processor_id();
+
+ pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
+ instr, cpu);
+
+ /* Set the error flag for this CPU and skip the faulting instruction. */
+ cpumask_set_cpu(cpu, &debug_err_mask);
+ instruction_pointer(regs) += 4;
+ return 0;
+}
+
+static struct undef_hook debug_reg_hook = {
+ .instr_mask = 0x0fe80f10,
+ .instr_val = 0x0e000e10,
+ .fn = debug_reg_trap,
+};
+
+static void reset_ctrl_regs(void *unused)
+{
+ int i, raw_num_brps, err = 0, cpu = smp_processor_id();
u32 dbg_power;
- cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
@@ -848,38 +891,52 @@
* Access Register to avoid taking undefined instruction exceptions
* later on.
*/
- if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+ switch (debug_arch) {
+ case ARM_DEBUG_ARCH_V7_ECP14:
/*
* Ensure sticky power-down is clear (i.e. debug logic is
* powered up).
*/
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
- if ((dbg_power & 0x1) == 0) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
- cpumask_or(cpumask, cpumask, cpumask_of(cpu));
- return;
- }
-
+ if ((dbg_power & 0x1) == 0)
+ err = -EPERM;
+ break;
+ case ARM_DEBUG_ARCH_V7_1:
/*
- * Unconditionally clear the lock by writing a value
- * other than 0xC5ACCE55 to the access register.
+ * Ensure the OS double lock is clear.
*/
- asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
- isb();
-
- /*
- * Clear any configured vector-catch events before
- * enabling monitor mode.
- */
- asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
- isb();
+ asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 1)
+ err = -EPERM;
+ break;
}
+ if (err) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
+ * Unconditionally clear the lock by writing a value
+ * other than 0xC5ACCE55 to the access register.
+ */
+ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+ isb();
+
+ /*
+ * Clear any configured vector-catch events before
+ * enabling monitor mode.
+ */
+ asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+ isb();
+
if (enable_monitor_mode())
return;
/* We must also reset any reserved registers. */
- for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
+ raw_num_brps = get_num_brp_resources();
+ for (i = 0; i < raw_num_brps; ++i) {
write_wb_reg(ARM_BASE_BCR + i, 0UL);
write_wb_reg(ARM_BASE_BVR + i, 0UL);
}
@@ -895,6 +952,7 @@
{
if (action == CPU_ONLINE)
smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+
return NOTIFY_OK;
}
@@ -905,7 +963,6 @@
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
- cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
@@ -916,28 +973,31 @@
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
- core_num_reserved_brps = get_num_reserved_brps();
core_num_wrps = get_num_wrps();
- pr_info("found %d breakpoint and %d watchpoint registers.\n",
- core_num_brps + core_num_reserved_brps, core_num_wrps);
-
- if (core_num_reserved_brps)
- pr_info("%d breakpoint(s) reserved for watchpoint "
- "single-step.\n", core_num_reserved_brps);
+ /*
+ * We need to tread carefully here because DBGSWENABLE may be
+ * driven low on this core and there isn't an architected way to
+ * determine that.
+ */
+ register_undef_hook(&debug_reg_hook);
/*
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
- on_each_cpu(reset_ctrl_regs, &cpumask, 1);
- if (!cpumask_empty(&cpumask)) {
+ on_each_cpu(reset_ctrl_regs, NULL, 1);
+ unregister_undef_hook(&debug_reg_hook);
+ if (!cpumask_empty(&debug_err_mask)) {
core_num_brps = 0;
- core_num_reserved_brps = 0;
core_num_wrps = 0;
return 0;
}
+ pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
+ core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
+ "", core_num_wrps);
+
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
max_watchpoint_len = 4;
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 79203ee..9fe8910 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,6 +60,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -971,6 +972,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
+#endif
static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
{
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
new file mode 100644
index 0000000..fc82de8
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -0,0 +1,1323 @@
+/*
+ * arch/arm/kernel/kprobes-test-arm.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "32"
+
+#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_MEM(15, 3f+1) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_arm_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
+
+#define _DATA_PROCESSING_DNM(op,s,val) \
+ TEST_RR( op "eq" s " r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "ne" s " r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cs" s " r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cc" s " r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "mi" s " r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "pl" s " r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vs" s " r6, r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", pc, lsl #3") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vc" s " r6, pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vc" s " r6, sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "hi" s " r8, r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
+ TEST_RRR( op "ls" s " r9, r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
+ TEST_RRR( op "ge" s " r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
+ TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
+ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
+ TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
+ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
+ TEST( op s " r4, pc" ", #0x00005a00")
+
+#define DATA_PROCESSING_DNM(op,val) \
+ _DATA_PROCESSING_DNM(op,"",val) \
+ _DATA_PROCESSING_DNM(op,"s",val)
+
+#define DATA_PROCESSING_NM(op,val) \
+ TEST_RR( op "ne r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "eq r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cc r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cs r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "pl r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "mi r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vc r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R ( op "vs r",7, VAL1,", pc, lsl #3") \
+ TEST_R ( op "vs r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vs pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vs sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "ls r",9, VAL1,", r",14,val, ", lsl r",0, 3,"") \
+ TEST_RRR( op "hi r",9, VAL1,", r",14,val, ", lsr r",7, 4,"") \
+ TEST_RRR( op "lt r",11,VAL1,", r",14,val, ", asr r",7, 5,"") \
+ TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
+ TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
+ TEST_R( op "eq r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
+ TEST_R( op " r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING_DM(op,s,val) \
+ TEST_R( op "eq" s " r0, r",1, val, "") \
+ TEST_R( op "ne" s " r1, r",1, val, ", lsl #3") \
+ TEST_R( op "cs" s " r2, r",3, val, ", lsr #4") \
+ TEST_R( op "cc" s " r3, r",3, val, ", asr #5") \
+ TEST_R( op "mi" s " r4, r",5, N(val),", asr #6") \
+ TEST_R( op "pl" s " r5, r",5, val, ", ror #7") \
+ TEST_R( op "vs" s " r6, r",10,val, ", rrx") \
+ TEST( op "vs" s " r7, pc, lsl #3") \
+ TEST( op "vs" s " r7, sp, lsr #4") \
+ TEST_RR( op "vc" s " r8, r",7, val, ", lsl r",0, 3,"") \
+ TEST_RR( op "hi" s " r9, r",9, val, ", lsr r",7, 4,"") \
+ TEST_RR( op "ls" s " r10, r",9, val, ", asr r",7, 5,"") \
+ TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
+ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
+ TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
+ TEST( op "eq" s " r0, #0xf5") \
+ TEST( op "ne" s " r11, #0xf5000000") \
+ TEST( op s " r7, #0x000af000") \
+ TEST( op s " r4, #0x00005a00")
+
+#define DATA_PROCESSING_DM(op,val) \
+ _DATA_PROCESSING_DM(op,"",val) \
+ _DATA_PROCESSING_DM(op,"s",val)
+
+ DATA_PROCESSING_DNM("and",0xf00f00ff)
+ DATA_PROCESSING_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING_DNM("sub",VAL2)
+ DATA_PROCESSING_DNM("rsb",VAL2)
+ DATA_PROCESSING_DNM("add",VAL2)
+ DATA_PROCESSING_DNM("adc",VAL2)
+ DATA_PROCESSING_DNM("sbc",VAL2)
+ DATA_PROCESSING_DNM("rsc",VAL2)
+ DATA_PROCESSING_NM("tst",0xf00f00ff)
+ DATA_PROCESSING_NM("teq",0xf00f00ff)
+ DATA_PROCESSING_NM("cmp",VAL2)
+ DATA_PROCESSING_NM("cmn",VAL2)
+ DATA_PROCESSING_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING_DM("mov",VAL2)
+ DATA_PROCESSING_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING_DM("mvn",VAL2)
+
+ TEST("mov ip, sp") /* This has special case emulation code */
+
+ TEST_SUPPORTED("mov pc, #0x1000");
+ TEST_SUPPORTED("mov sp, #0x1000");
+ TEST_SUPPORTED("cmp pc, #0x1000");
+ TEST_SUPPORTED("cmp sp, #0x1000");
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc")
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED("movs pc, r1")
+ TEST_UNSUPPORTED("movs pc, r1, lsl r2")
+ TEST_UNSUPPORTED("movs pc, #0x10000")
+ TEST_UNSUPPORTED("adds pc, lr, r1")
+ TEST_UNSUPPORTED("adds pc, lr, r1, lsl r2")
+ TEST_UNSUPPORTED("adds pc, lr, #4")
+
+ /* Data-processing with SP as target */
+ TEST("add sp, sp, #16")
+ TEST("sub sp, sp, #8")
+ TEST("bic sp, sp, #0x20")
+ TEST("orr sp, sp, #0x20")
+ TEST_PR( "add sp, r",10,0,", r",11,4,"")
+ TEST_PRR("add sp, r",10,0,", r",11,4,", asl r",12,1,"")
+ TEST_P( "mov sp, r",10,0,"")
+ TEST_PR( "mov sp, r",10,0,", asl r",12,0,"")
+
+ /* Data-processing with PC as target */
+ TEST_BF( "add pc, pc, #2f-1b-8")
+ TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
+ TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
+ TEST_BF_R ("mov pc, r",0,2f,"")
+ TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
+ TEST_BB( "sub pc, pc, #1b-2b+8")
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#endif
+ TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
+ TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
+ TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
+ TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
+#endif
+ TEST_GROUP("Miscellaneous instructions")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrspl r7, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, lr")
+ TEST_UNSUPPORTED("msr spsr, r0")
+
+ TEST_BF_R("bx r",0,2f,"")
+ TEST_BB_R("bx r",7,2f,"")
+ TEST_BF_R("bxeq r",14,2f,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clzeq r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+ TEST( "clz r4, sp")
+ TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0")
+ TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("bxj r0")
+#endif
+
+ TEST_BF_R("blx r",0,2f,"")
+ TEST_BB_R("blx r",7,2f,"")
+ TEST_BF_R("blxeq r",14,2f,"")
+ TEST_UNSUPPORTED(".word 0x0120003f @ blx pc")
+
+ TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qsub lr, r",9, VAL2,", r13")
+ TEST_RR( "qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdsub lr, r",9, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc")
+ TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1")
+
+ TEST_UNSUPPORTED("bkpt 0xffff")
+ TEST_UNSUPPORTED("bkpt 0x0000")
+
+ TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+
+ TEST_GROUP("Halfword multiply and multiply-accumulate")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+
+ TEST_GROUP("Multiply and multiply-accumulate")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "mul lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+ TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "muls lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+ TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umaal lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+#endif
+
+ TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+ TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+ TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+ TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+ TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+
+ TEST_GROUP("Synchronization primitives")
+
+ /*
+ * Use hard coded constants for SWP instructions to avoid warnings
+ * about deprecated instructions.
+ */
+ TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
+ TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
+ TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
+ TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
+ TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+ TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
+ TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
+
+ TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("ldrex r2, [sp]")
+ TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]")
+ TEST_UNSUPPORTED("ldrexd r2, r3, [sp]")
+ TEST_UNSUPPORTED("strexb r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexb r2, [sp]")
+ TEST_UNSUPPORTED("strexh r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexh r2, [sp]")
+#endif
+ TEST_GROUP("Extra load/store instructions")
+
+ TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")
+ TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]")
+ TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
+ TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc")
+
+ TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc")
+
+ TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]")
+ TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]")
+ TEST_RP( "strh r",1, VAL1,", [r",2, 24,", #4]!")
+ TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!")
+ TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48")
+ TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48")
+
+ TEST_P( "ldrh r0, [r",0, 24,", #-2]")
+ TEST_P( "ldrvsh r14, [r",13,0, ", #2]")
+ TEST_P( "ldrh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrvch r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrh r10, [r",9, 64,"], #-48")
+ TEST( "ldrh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48")
+
+ TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]")
+ TEST_PR( "ldrsb r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11")
+
+ TEST_P( "ldrsb r0, [r",0, 24,", #-1]")
+ TEST_P( "ldrgesb r14, [r",13,0, ", #1]")
+ TEST_P( "ldrsb r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrltsb r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsb r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsb r10, [r",9, 64,"], #-48")
+ TEST( "ldrsb r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48")
+
+ TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrsh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11")
+
+ TEST_P( "ldrsh r0, [r",0, 24,", #-1]")
+ TEST_P( "ldreqsh r14, [r",13,0 ,", #1]")
+ TEST_P( "ldrsh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrnesh r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsh r10, [r",9, 64,"], #-48")
+ TEST( "ldrsh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("strht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrht r1, [r2], r3")
+ TEST_UNSUPPORTED("strht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
+#endif
+
+ TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
+ TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
+ TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+ TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")
+
+ TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]")
+ TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]")
+ TEST_PR( "ldrd r4, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"")
+ TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc")
+
+ TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]")
+ TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]")
+ TEST_RP( "strd r",4, VAL1,", [r",2, 24,", #16]!")
+ TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!")
+ TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48")
+ TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!")
+
+ TEST_P( "ldrd r0, [r",0, 24,", #-8]")
+ TEST_P( "ldrhid r8, [r",13,0, ", #8]")
+ TEST_P( "ldrd r4, [r",2, 24,", #16]!")
+ TEST_P( "ldrlsd r6, [r",11,24,", #-16]!")
+ TEST_P( "ldrd r2, [r",5, 24,"], #48")
+ TEST_P( "ldrd r10, [r",9,6,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48")
+ TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48")
+
+ TEST_GROUP("Miscellaneous")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0")
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0")
+#endif
+
+ TEST_UNSUPPORTED("msr cpsr, 0x13")
+ TEST_UNSUPPORTED("msr cpsr_f, 0xf0000000")
+ TEST_UNSUPPORTED("msr spsr, 0x13")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED("dbg #0")
+#endif
+
+ TEST_GROUP("Load/store word and unsigned byte")
+
+#define LOAD_STORE(byte) \
+ TEST_RP( "str"byte" r",0, VAL1,", [r",1, 24,", #-2]") \
+ TEST_RP( "str"byte" r",14,VAL2,", [r",13,0, ", #2]") \
+ TEST_RP( "str"byte" r",1, VAL1,", [r",2, 24,", #4]!") \
+ TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \
+ TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \
+ TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \
+ TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \
+ TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\
+ TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \
+ TEST_P( "ldr"byte" r14, [r",13,0, ", #2]") \
+ TEST_P( "ldr"byte" r1, [r",2, 24,", #4]!") \
+ TEST_P( "ldr"byte" r12, [r",11,24,", #-4]!") \
+ TEST_P( "ldr"byte" r2, [r",3, 24,"], #48") \
+ TEST_P( "ldr"byte" r10, [r",9, 64,"], #-48") \
+ TEST_PR( "ldr"byte" r0, [r",0, 48,", -r",2, 24,"]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 48,"]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 48,"]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,48,", -r",10,24,"]!") \
+ TEST_PR( "ldr"byte" r2, [r",3, 24,"], r",4, 48,"") \
+ TEST_PR( "ldr"byte" r10, [r",9, 48,"], -r",11,24,"") \
+ TEST_PR( "ldr"byte" r0, [r",0, 24,", r",2, 32,", asl #1]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 32,", lsr #2]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 32,", asr #3]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,24,", r",10, 4,", ror #31]!") \
+ TEST( "ldr"byte" r0, [pc, #0]") \
+ TEST_R( "ldr"byte" r12, [pc, r",14,0,"]")
+
+ LOAD_STORE("")
+ TEST_P( "str pc, [r",0,0,", #15*4]")
+ TEST_R( "str pc, [sp, r",2,15*4,"]")
+ TEST_BF( "ldr pc, [sp, #15*4]")
+ TEST_BF_R("ldr pc, [sp, r",2,15*4,"]")
+
+ TEST_P( "str sp, [r",0,0,", #13*4]")
+ TEST_R( "str sp, [sp, r",2,13*4,"]")
+ TEST_BF( "ldr sp, [sp, #13*4]")
+ TEST_BF_R("ldr sp, [sp, r",2,13*4,"]")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+#endif
+ TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]")
+ TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]")
+
+ LOAD_STORE("b")
+ TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!")
+ TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!")
+
+ TEST_UNSUPPORTED("ldrt r0, [r1], #4")
+ TEST_UNSUPPORTED("ldrt r1, [r2], r3")
+ TEST_UNSUPPORTED("strt r2, [r3], #4")
+ TEST_UNSUPPORTED("strt r3, [r4], r5")
+ TEST_UNSUPPORTED("ldrbt r4, [r5], #4")
+ TEST_UNSUPPORTED("ldrbt r5, [r6], r7")
+ TEST_UNSUPPORTED("strbt r6, [r7], #4")
+ TEST_UNSUPPORTED("strbt r7, [r8], r9")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+
+ TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10")
+ TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10")
+ TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10")
+ TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10")
+ TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+ TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10")
+
+ TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10")
+ TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10")
+ TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10")
+ TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10")
+ TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+ TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10")
+
+ TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10")
+ TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10")
+ TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10")
+ TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10")
+ TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+ TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+
+ TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10")
+ TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10")
+ TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10")
+ TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10")
+ TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+ TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10")
+
+ TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10")
+ TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10")
+ TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10")
+ TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10")
+ TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+ TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10")
+
+ TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10")
+ TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10")
+ TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10")
+ TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10")
+ TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+ TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc")
+#endif /* __LINUX_ARM_ARCH__ >= 7 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Packing, unpacking, saturation, and reversal")
+
+ TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2")
+ TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+ TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2")
+ TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8")
+
+ TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8")
+
+ TEST_R( "rev r0, r",0, VAL1,"")
+ TEST_R( "rev r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8")
+
+ TEST_R( "rev16 r0, r",0, VAL1,"")
+ TEST_R( "rev16 r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_R( "rbit r0, r",0, VAL1,"")
+ TEST_R( "rbit r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12")
+#endif
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7")
+ TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc")
+ TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8")
+ TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8")
+
+ TEST_R( "revsh r0, r",0, VAL1,"")
+ TEST_R( "revsh r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12")
+ TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc")
+
+ TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+
+ TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Signed multiplies")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8")
+
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8")
+
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10")
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc")
+
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8")
+
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc")
+
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Bit Field")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfcvs r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31");
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20")
+
+ TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */
+ TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ TEST_GROUP("Branch, branch with link, and block data transfer")
+
+ TEST_P( "stmda r",0, 16*4,", {r0}")
+ TEST_P( "stmeqda r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmneda r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmda r",13,0, "!, {pc}")
+
+ TEST_P( "ldmda r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmcsda r",4, 15*4,", {r0-r15}")
+ TEST_BF_P("ldmccda r",7, 15*4,"!, {r8-r15}")
+ TEST_P( "ldmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmda r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmia r",0, 16*4,", {r0}")
+ TEST_P( "stmmiia r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmplia r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmia r",14,0, "!, {pc}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmvsia r",4, 0, ", {r0-r15}")
+ TEST_BF_P("ldmvcia r",7, 8*4, "!, {r8-r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0}")
+ TEST_P( "stmhidb r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmlsdb r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmdb r",13,4, "!, {pc}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmgedb r",4, 16*4,", {r0-r15}")
+ TEST_BF_P("ldmltdb r",7, 16*4,"!, {r8-r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {pc}")
+
+ TEST_P( "stmib r",0, 16*4,", {r0}")
+ TEST_P( "stmgtib r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmleib r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmib r",13,-4, "!, {pc}")
+
+ TEST_P( "ldmib r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmeqib r",4, -4,", {r0-r15}")
+ TEST_BF_P("ldmneib r",7, 7*4,"!, {r8-r15}")
+ TEST_P( "ldmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmib r",14,14*4,"!, {pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmeqdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmnedb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmccia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmcsia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia r",0,15*4,", {pc}")
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia r",13,0,", {r0-r15}")
+#endif
+ TEST_BF("b 2f")
+ TEST_BF("bl 2f")
+ TEST_BB("b 2b")
+ TEST_BB("bl 2b")
+
+ TEST_BF("beq 2f")
+ TEST_BF("bleq 2f")
+ TEST_BB("bne 2b")
+ TEST_BB("blne 2b")
+
+ TEST_BF("bgt 2f")
+ TEST_BF("blgt 2f")
+ TEST_BB("blt 2b")
+ TEST_BB("bllt 2b")
+
+ TEST_GROUP("Supervisor Call, and coprocessor instructions")
+
+ /*
+ * We can't really test these by executing them, so all
+ * we can do is check that probes are, or are not allowed.
+ * At the moment none are allowed...
+ */
+#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code)
+
+#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc) \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], {1}") \
+ \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}")
+
+#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \
+ \
+ TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mcr"two" 0, 0, r0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
+ COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+ TEST_UNSUPPORTED("svc 0")
+ TEST_UNSUPPORTED("svc 0xffffff")
+
+ TEST_UNSUPPORTED("svc 0")
+
+ TEST_GROUP("Unconditional instruction")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("srsda sp, 0x13")
+ TEST_UNSUPPORTED("srsdb sp, 0x13")
+ TEST_UNSUPPORTED("srsia sp, 0x13")
+ TEST_UNSUPPORTED("srsib sp, 0x13")
+ TEST_UNSUPPORTED("srsda sp!, 0x13")
+ TEST_UNSUPPORTED("srsdb sp!, 0x13")
+ TEST_UNSUPPORTED("srsia sp!, 0x13")
+ TEST_UNSUPPORTED("srsib sp!, 0x13")
+
+ TEST_UNSUPPORTED("rfeda sp")
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfeib sp")
+ TEST_UNSUPPORTED("rfeda sp!")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+ TEST_UNSUPPORTED("rfeib sp!")
+ TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc")
+ TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc")
+ TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc")
+ TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc")
+ TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!")
+ TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!")
+ TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!")
+ TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_X( "blx __dummy_thumb_subroutine_even",
+ ".thumb \n\t"
+ ".space 4 \n\t"
+ ".type __dummy_thumb_subroutine_even, %%function \n\t"
+ "__dummy_thumb_subroutine_even: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_even")
+
+ TEST_X( "blx __dummy_thumb_subroutine_odd",
+ ".thumb \n\t"
+ ".space 2 \n\t"
+ ".type __dummy_thumb_subroutine_odd, %%function \n\t"
+ "__dummy_thumb_subroutine_odd: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_odd")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+#if __LINUX_ARM_ARCH__ >= 6
+ COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+#endif
+
+ TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("cps 0x13")
+ TEST_UNSUPPORTED("cpsie i")
+ TEST_UNSUPPORTED("cpsid i")
+ TEST_UNSUPPORTED("cpsie i,0x13")
+ TEST_UNSUPPORTED("cpsid i,0x13")
+ TEST_UNSUPPORTED("setend le")
+ TEST_UNSUPPORTED("setend be")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_P("pli [r",0,0b,", #16]")
+ TEST( "pli [pc, #0]")
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 5
+ TEST_P("pld [r",0,32,", #-16]")
+ TEST( "pld [pc, #0]")
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]")
+ TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]")
+ TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]");
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+#endif
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
new file mode 100644
index 0000000..5e726c3
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -0,0 +1,1187 @@
+/*
+ * arch/arm/kernel/kprobes-test-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "16"
+
+#define DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK; \
+ tests \
+ kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK;
+
+#define CONDITION_INSTRUCTIONS(cc_pos, tests) \
+ kprobe_test_cc_position = cc_pos; \
+ DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_cc_position = 0;
+
+#define TEST_ITBLOCK(code) \
+ kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK; \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " mov r1, #0x11 \n\t" \
+ " mov r2, #0x22 \n\t" \
+ " mov r3, #0x33 \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END \
+ kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK;
+
+#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f+1) \
+ TEST_ARG_MEM(15, 3f) \
+ TEST_ARG_END("") \
+ " nop \n\t" /* To align 1f */ \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "3: adr lr, 2f+1 \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_thumb16_test_cases(void)
+{
+ kprobe_test_flags = TEST_FLAG_NARROW_INSTR;
+
+ TEST_GROUP("Shift (immediate), add, subtract, move, and compare")
+
+ TEST_R( "lsls r7, r",0,VAL1,", #5")
+ TEST_R( "lsls r0, r",7,VAL2,", #11")
+ TEST_R( "lsrs r7, r",0,VAL1,", #5")
+ TEST_R( "lsrs r0, r",7,VAL2,", #11")
+ TEST_R( "asrs r7, r",0,VAL1,", #5")
+ TEST_R( "asrs r0, r",7,VAL2,", #11")
+ TEST_RR( "adds r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "adds r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_RR( "subs r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "subs r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_R( "adds r7, r",0,VAL1,", #5")
+ TEST_R( "adds r0, r",7,VAL2,", #2")
+ TEST_R( "subs r7, r",0,VAL1,", #5")
+ TEST_R( "subs r0, r",7,VAL2,", #2")
+ TEST( "movs.n r0, #0x5f")
+ TEST( "movs.n r7, #0xa0")
+ TEST_R( "cmp.n r",0,0x5e, ", #0x5f")
+ TEST_R( "cmp.n r",5,0x15f,", #0x5f")
+ TEST_R( "cmp.n r",7,0xa0, ", #0xa0")
+ TEST_R( "adds.n r",0,VAL1,", #0x5f")
+ TEST_R( "adds.n r",7,VAL2,", #0xa0")
+ TEST_R( "subs.n r",0,VAL1,", #0x5f")
+ TEST_R( "subs.n r",7,VAL2,", #0xa0")
+
+ TEST_GROUP("16-bit Thumb data-processing instructions")
+
+#define DATA_PROCESSING16(op,val) \
+ TEST_RR( op" r",0,VAL1,", r",7,val,"") \
+ TEST_RR( op" r",7,VAL2,", r",0,val,"")
+
+ DATA_PROCESSING16("ands",0xf00f00ff)
+ DATA_PROCESSING16("eors",0xf00f00ff)
+ DATA_PROCESSING16("lsls",11)
+ DATA_PROCESSING16("lsrs",11)
+ DATA_PROCESSING16("asrs",11)
+ DATA_PROCESSING16("adcs",VAL2)
+ DATA_PROCESSING16("sbcs",VAL2)
+ DATA_PROCESSING16("rors",11)
+ DATA_PROCESSING16("tst",0xf00f00ff)
+ TEST_R("rsbs r",0,VAL1,", #0")
+ TEST_R("rsbs r",7,VAL2,", #0")
+ DATA_PROCESSING16("cmp",0xf00f00ff)
+ DATA_PROCESSING16("cmn",0xf00f00ff)
+ DATA_PROCESSING16("orrs",0xf00f00ff)
+ DATA_PROCESSING16("muls",VAL2)
+ DATA_PROCESSING16("bics",0xf00f00ff)
+ DATA_PROCESSING16("mvns",VAL2)
+
+ TEST_GROUP("Special data instructions and branch and exchange")
+
+ TEST_RR( "add r",0, VAL1,", r",7,VAL2,"")
+ TEST_RR( "add r",3, VAL2,", r",8,VAL3,"")
+ TEST_RR( "add r",8, VAL3,", r",0,VAL1,"")
+ TEST_R( "add sp" ", r",8,-8, "")
+ TEST_R( "add r",14,VAL1,", pc")
+ TEST_BF_R("add pc" ", r",0,2f-1f-8,"")
+ TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc")
+
+ TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"")
+ TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"")
+ TEST_R( "cmp sp" ", r",8,-8, "")
+
+ TEST_R( "mov r0, r",7,VAL2,"")
+ TEST_R( "mov r3, r",8,VAL3,"")
+ TEST_R( "mov r8, r",0,VAL1,"")
+ TEST_P( "mov sp, r",8,-8, "")
+ TEST( "mov lr, pc")
+ TEST_BF_R("mov pc, r",0,2f, "")
+
+ TEST_BF_R("bx r",0, 2f+1,"")
+ TEST_BF_R("bx r",14,2f+1,"")
+ TESTCASE_START("bx pc")
+ TEST_ARG_REG(14, 99f+1)
+ TEST_ARG_END("")
+ " nop \n\t" /* To align the bx pc*/
+ "50: nop \n\t"
+ "1: bx pc \n\t"
+ " bx lr \n\t"
+ ".arm \n\t"
+ " adr lr, 2f+1 \n\t"
+ " bx lr \n\t"
+ ".thumb \n\t"
+ "2: nop \n\t"
+ TESTCASE_END
+
+ TEST_BF_R("blx r",0, 2f+1,"")
+ TEST_BB_R("blx r",14,2f+1,"")
+ TEST_UNSUPPORTED(".short 0x47f8 @ blx pc")
+
+ TEST_GROUP("Load from Literal Pool")
+
+ TEST_X( "ldr r0, 3f",
+ ".align \n\t"
+ "3: .word "__stringify(VAL1))
+ TEST_X( "ldr r7, 3f",
+ ".space 128 \n\t"
+ ".align \n\t"
+ "3: .word "__stringify(VAL2))
+
+ TEST_GROUP("16-bit Thumb Load/store instructions")
+
+ TEST_RPR("str r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("str r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strh r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strh r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strb r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strb r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrsb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldr r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldr r7, [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrh r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrsh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsh r7, [r",6, 24,", r",5, 50,"]")
+
+ TEST_RP("str r",0, VAL1,", [r",1, 24,", #120]")
+ TEST_RP("str r",7, VAL2,", [r",6, 24,", #120]")
+ TEST_P( "ldr r0, [r",1, 24,", #120]")
+ TEST_P( "ldr r7, [r",6, 24,", #120]")
+ TEST_RP("strb r",0, VAL1,", [r",1, 24,", #30]")
+ TEST_RP("strb r",7, VAL2,", [r",6, 24,", #30]")
+ TEST_P( "ldrb r0, [r",1, 24,", #30]")
+ TEST_P( "ldrb r7, [r",6, 24,", #30]")
+ TEST_RP("strh r",0, VAL1,", [r",1, 24,", #60]")
+ TEST_RP("strh r",7, VAL2,", [r",6, 24,", #60]")
+ TEST_P( "ldrh r0, [r",1, 24,", #60]")
+ TEST_P( "ldrh r7, [r",6, 24,", #60]")
+
+ TEST_R( "str r",0, VAL1,", [sp, #0]")
+ TEST_R( "str r",7, VAL2,", [sp, #160]")
+ TEST( "ldr r0, [sp, #0]")
+ TEST( "ldr r7, [sp, #160]")
+
+ TEST_RP("str r",0, VAL1,", [r",0, 24,"]")
+ TEST_P( "ldr r0, [r",0, 24,"]")
+
+ TEST_GROUP("Generate PC-/SP-relative address")
+
+ TEST("add r0, pc, #4")
+ TEST("add r7, pc, #1020")
+ TEST("add r0, sp, #4")
+ TEST("add r7, sp, #1020")
+
+ TEST_GROUP("Miscellaneous 16-bit instructions")
+
+ TEST_UNSUPPORTED( "cpsie i")
+ TEST_UNSUPPORTED( "cpsid i")
+ TEST_UNSUPPORTED( "setend le")
+ TEST_UNSUPPORTED( "setend be")
+
+ TEST("add sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */
+ TEST("sub sp, #0x7f*4")
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_BF_R( "cbnz r",0,0, ", 2f")
+ TEST_BF_R( "cbz r",2,-1,", 2f")
+ TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
+ TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
+)
+ TEST_R("sxth r0, r",7, HH1,"")
+ TEST_R("sxth r7, r",0, HH2,"")
+ TEST_R("sxtb r0, r",7, HH1,"")
+ TEST_R("sxtb r7, r",0, HH2,"")
+ TEST_R("uxth r0, r",7, HH1,"")
+ TEST_R("uxth r7, r",0, HH2,"")
+ TEST_R("uxtb r0, r",7, HH1,"")
+ TEST_R("uxtb r7, r",0, HH2,"")
+ TEST_R("rev r0, r",7, VAL1,"")
+ TEST_R("rev r7, r",0, VAL2,"")
+ TEST_R("rev16 r0, r",7, VAL1,"")
+ TEST_R("rev16 r7, r",0, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xba80")
+ TEST_UNSUPPORTED(".short 0xbabf")
+ TEST_R("revsh r0, r",7, VAL1,"")
+ TEST_R("revsh r7, r",0, VAL2,"")
+
+#define TEST_POPPC(code, offset) \
+ TESTCASE_START(code) \
+ TEST_ARG_PTR(13, offset) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code,0) \
+ TESTCASE_END
+
+ TEST("push {r0}")
+ TEST("push {r7}")
+ TEST("push {r14}")
+ TEST("push {r0-r7,r14}")
+ TEST("push {r0,r2,r4,r6,r14}")
+ TEST("push {r1,r3,r5,r7}")
+ TEST("pop {r0}")
+ TEST("pop {r7}")
+ TEST("pop {r0,r2,r4,r6}")
+ TEST_POPPC("pop {pc}",15*4)
+ TEST_POPPC("pop {r0-r7,pc}",7*4)
+ TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4)
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {pc} @ ",13,15*4,"")
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {r0-r7,pc} @ ",13,7*4,"")
+
+ TEST_UNSUPPORTED("bkpt.n 0")
+ TEST_UNSUPPORTED("bkpt.n 255")
+
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
+ TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+
+#define TEST_IT(code, code2) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " "code2" \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_IT("it eq","moveq r0,#0")
+ TEST_IT("it vc","movvc r0,#0")
+ TEST_IT("it le","movle r0,#0")
+ TEST_IT("ite eq","moveq r0,#0\n\t movne r1,#1")
+ TEST_IT("itet vc","movvc r0,#0\n\t movvs r1,#1\n\t movvc r2,#2")
+ TEST_IT("itete le","movle r0,#0\n\t movgt r1,#1\n\t movle r2,#2\n\t movgt r3,#3")
+ TEST_IT("itttt le","movle r0,#0\n\t movle r1,#1\n\t movle r2,#2\n\t movle r3,#3")
+ TEST_IT("iteee le","movle r0,#0\n\t movgt r1,#1\n\t movgt r2,#2\n\t movgt r3,#3")
+)
+
+ TEST_GROUP("Load and store multiple")
+
+ TEST_P("ldmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("ldmia r",7, 16*4,"!, {r0-r6}")
+ TEST_P("stmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("stmia r",0, 16*4,"!, {r0-r7}")
+
+ TEST_GROUP("Conditional branch and Supervisor Call instructions")
+
+CONDITION_INSTRUCTIONS(8,
+ TEST_BF("beq 2f")
+ TEST_BB("bne 2b")
+ TEST_BF("bgt 2f")
+ TEST_BB("blt 2b")
+)
+ TEST_UNSUPPORTED(".short 0xde00")
+ TEST_UNSUPPORTED(".short 0xdeff")
+ TEST_UNSUPPORTED("svc #0x00")
+ TEST_UNSUPPORTED("svc #0xff")
+
+ TEST_GROUP("Unconditional branch")
+
+ TEST_BF( "b 2f")
+ TEST_BB( "b 2b")
+ TEST_BF_X("b 2f", 0x400)
+ TEST_BB_X("b 2b", 0x400)
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("subs.n r0, r0")
+
+ verbose("\n");
+}
+
+
+void kprobe_thumb32_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Load/store multiple")
+
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+
+ TEST_P( "stmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmia r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmia r",7, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmia r",4, 0, ", {r0-r12,r14}")
+ TEST_BF_P("ldmia r",5, 8*4, "!, {r6-r12,r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,14*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmdb r",5, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_BF_P("ldmdb r",5, 16*4,"!, {r6-r12,r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmdb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}")
+
+ TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}")
+ TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}")
+ TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}")
+
+ TEST_GROUP("Load/store double or exclusive, table branch")
+
+ TEST_P( "ldrd r0, r1, [r",1, 24,", #-16]")
+ TEST( "ldrd r12, r14, [sp, #16]")
+ TEST_P( "ldrd r1, r0, [r",7, 24,", #-16]!")
+ TEST( "ldrd r14, r12, [sp, #16]!")
+ TEST_P( "ldrd r1, r0, [r",7, 24,"], #16")
+ TEST( "ldrd r7, r8, [sp], #-16")
+
+ TEST_X( "ldrd r12, r14, 3f",
+ ".align 3 \n\t"
+ "3: .word "__stringify(VAL1)" \n\t"
+ " .word "__stringify(VAL2))
+
+ TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]")
+
+ TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
+ TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!")
+ TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
+ TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16")
+ TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16")
+
+ TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbb [pc, r",4, (9f-(1f+4)+1),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbb [r",1,9f,", r",2,0,"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbh [r",1,9f, ", r",14,1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]")
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]")
+ TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]")
+
+ TEST_UNSUPPORTED("strexb r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexh r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexd r0, r1, [r2]")
+ TEST_UNSUPPORTED("ldrexb r0, [r1]")
+ TEST_UNSUPPORTED("ldrexh r0, [r1]")
+ TEST_UNSUPPORTED("ldrexd r0, [r1]")
+
+ TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
+
+#define _DATA_PROCESSING32_DNM(op,s,val) \
+ TEST_RR(op s".w r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op s" r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op s" r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op s" r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op s" r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op s" r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op s" r8, r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op s" r0, r",11,VAL1,", #0x00010001") \
+ TEST_R( op s" r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s" r7, r",8, VAL2,", #0x000af000")
+
+#define DATA_PROCESSING32_DNM(op,val) \
+ _DATA_PROCESSING32_DNM(op,"",val) \
+ _DATA_PROCESSING32_DNM(op,"s",val)
+
+#define DATA_PROCESSING32_NM(op,val) \
+ TEST_RR(op".w r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op" r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op" r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op" r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op" r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op" r",11,VAL1,", #0x00010001") \
+ TEST_R( op" r",0, VAL1,", #0xf5000000") \
+ TEST_R( op" r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING32_DM(op,s,val) \
+ TEST_R( op s".w r0, r",14, val, "") \
+ TEST_R( op s" r1, r",12, val, ", lsl #3") \
+ TEST_R( op s" r2, r",11, val, ", lsr #4") \
+ TEST_R( op s" r3, r",10, val, ", asr #5") \
+ TEST_R( op s" r4, r",9, N(val),", asr #6") \
+ TEST_R( op s" r5, r",8, val, ", ror #7") \
+ TEST_R( op s" r8, r",7,val, ", rrx") \
+ TEST( op s" r0, #0x00010001") \
+ TEST( op s" r11, #0xf5000000") \
+ TEST( op s" r7, #0x000af000") \
+ TEST( op s" r4, #0x00005a00")
+
+#define DATA_PROCESSING32_DM(op,val) \
+ _DATA_PROCESSING32_DM(op,"",val) \
+ _DATA_PROCESSING32_DM(op,"s",val)
+
+ DATA_PROCESSING32_DNM("and",0xf00f00ff)
+ DATA_PROCESSING32_NM("tst",0xf00f00ff)
+ DATA_PROCESSING32_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING32_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING32_DM("mov",VAL2)
+ DATA_PROCESSING32_DNM("orn",0xf00f00ff)
+ DATA_PROCESSING32_DM("mvn",VAL2)
+ DATA_PROCESSING32_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING32_NM("teq",0xf00f00ff)
+ DATA_PROCESSING32_DNM("add",VAL2)
+ DATA_PROCESSING32_NM("cmn",VAL2)
+ DATA_PROCESSING32_DNM("adc",VAL2)
+ DATA_PROCESSING32_DNM("sbc",VAL2)
+ DATA_PROCESSING32_DNM("sub",VAL2)
+ DATA_PROCESSING32_NM("cmp",VAL2)
+ DATA_PROCESSING32_DNM("rsb",VAL2)
+
+ TEST_RR("pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc")
+ TEST_P("cmn.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7")
+ TEST( "cmn sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc")
+ TEST_P("cmp.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7")
+ TEST( "cmp sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008")
+
+ TEST_R("add.w r0, sp, r",1, 4,"")
+ TEST_R("adds r0, sp, r",1, 4,", asl #3")
+ TEST_R("add r0, sp, r",1, 4,", asl #4")
+ TEST_R("add r0, sp, r",1, 16,", ror #1")
+ TEST_R("add.w sp, sp, r",1, 4,"")
+ TEST_R("add sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1")
+ TEST( "add.w r0, sp, #24")
+ TEST( "add.w sp, sp, #24")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp")
+
+ TEST_R("sub.w r0, sp, r",1, 4,"")
+ TEST_R("subs r0, sp, r",1, 4,", asl #3")
+ TEST_R("sub r0, sp, r",1, 4,", asl #4")
+ TEST_R("sub r0, sp, r",1, 16,", ror #1")
+ TEST_R("sub.w sp, sp, r",1, 4,"")
+ TEST_R("sub sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1")
+ TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1")
+ TEST( "sub.w r0, sp, #24")
+ TEST( "sub.w sp, sp, #24")
+
+ TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp")
+ TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3")
+ TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp")
+ TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3")
+ TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb20,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb80,0x0000")
+ TEST_UNSUPPORTED(".short 0xebe0,0x0000")
+
+ TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf120,0x0000")
+ TEST_UNSUPPORTED(".short 0xf180,0x0000")
+ TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xec00,0x0000")
+ TEST_UNSUPPORTED(".short 0xeff0,0x0000")
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+
+ TEST_GROUP("Data-processing (plain binary immediate)")
+
+ TEST_R("addw r0, r",1, VAL1,", #0x123")
+ TEST( "addw r14, sp, #0xf5a")
+ TEST( "addw sp, sp, #0x20")
+ TEST( "addw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120")
+
+ TEST_R("subw r0, r",1, VAL1,", #0x123")
+ TEST( "subw r14, sp, #0xf5a")
+ TEST( "subw sp, sp, #0x20")
+ TEST( "subw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120")
+
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0")
+ TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0")
+
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0")
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfc r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31")
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20")
+
+ TEST_GROUP("Branches and miscellaneous control")
+
+CONDITION_INSTRUCTIONS(22,
+ TEST_BF("beq.w 2f")
+ TEST_BB("bne.w 2b")
+ TEST_BF("bgt.w 2f")
+ TEST_BB("blt.w 2b")
+ TEST_BF_X("bpl.w 2f",0x1000)
+)
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, r1")
+ TEST_UNSUPPORTED("msr spsr, r2")
+
+ TEST_UNSUPPORTED("cpsie.w i")
+ TEST_UNSUPPORTED("cpsid.w i")
+ TEST_UNSUPPORTED("cps 0x13")
+
+ TEST_SUPPORTED("yield.w")
+ TEST("sev.w")
+ TEST("nop.w")
+ TEST("wfi.w")
+ TEST_SUPPORTED("wfe.w")
+ TEST_UNSUPPORTED("dbg.w #0")
+
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+
+ TEST_UNSUPPORTED("bxj r0")
+
+ TEST_UNSUPPORTED("subs pc, lr, #4")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+
+ TEST_BF( "b.w 2f")
+ TEST_BB( "b.w 2b")
+ TEST_BF_X("b.w 2f", 0x1000)
+
+ TEST_BF( "bl.w 2f")
+ TEST_BB( "bl.w 2b")
+ TEST_BB_X("bl.w 2b", 0x1000)
+
+ TEST_X( "blx __dummy_arm_subroutine",
+ ".arm \n\t"
+ ".align \n\t"
+ ".type __dummy_arm_subroutine, %%function \n\t"
+ "__dummy_arm_subroutine: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".thumb \n\t"
+ )
+ TEST( "blx __dummy_arm_subroutine")
+
+ TEST_GROUP("Store single data item")
+
+#define SINGLE_STORE(size) \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,-1024,", #1024]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, -1024,", #1080]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #-120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #-128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, ", #120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, ", #128]!") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \
+ TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \
+ TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \
+ TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \
+ TEST_UNSUPPORTED("str"size"t r0, [r1, #4]")
+
+ SINGLE_STORE("b")
+ SINGLE_STORE("h")
+ SINGLE_STORE("")
+
+ TEST("str sp, [sp]")
+ TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]")
+ TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]")
+
+ TEST_GROUP("Advanced SIMD element or structure load/store instructions")
+
+ TEST_UNSUPPORTED(".short 0xf900,0x0000")
+ TEST_UNSUPPORTED(".short 0xf92f,0xffff")
+ TEST_UNSUPPORTED(".short 0xf980,0x0000")
+ TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+
+ TEST_GROUP("Load single data item and memory hints")
+
+#define SINGLE_LOAD(size) \
+ TEST_P( "ldr"size" r0, [r",11,-1024, ", #1024]") \
+ TEST_P( "ldr"size" r14, [r",1, -1024,", #1080]") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #120") \
+ TEST_P( "ldr"size" r14, [r",1, 24, "], #128") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #-120") \
+ TEST_P( "ldr"size" r14, [r",1,24, "], #-128") \
+ TEST_P( "ldr"size" r0, [r",11,24, ", #120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 24, ", #128]!") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]!") \
+ TEST_PR("ldr"size".w r0, [r",1, 0,", r",2, 4,"]") \
+ TEST_PR("ldr"size" r14, [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_X( "ldr"size".w r0, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL1)) \
+ TEST_X( "ldr"size".w r14, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL2)) \
+ TEST( "ldr"size".w r7, 3b") \
+ TEST( "ldr"size".w r7, [sp, #24]") \
+ TEST_P( "ldr"size".w r0, [r",0,0, "]") \
+ TEST_UNSUPPORTED("ldr"size"t r0, [r1, #4]")
+
+ SINGLE_LOAD("b")
+ SINGLE_LOAD("sb")
+ SINGLE_LOAD("h")
+ SINGLE_LOAD("sh")
+ SINGLE_LOAD("")
+
+ TEST_BF_P("ldr pc, [r",14, 15*4,"]")
+ TEST_P( "ldr sp, [r",14, 13*4,"]")
+ TEST_BF_R("ldr pc, [sp, r",14, 15*4,"]")
+ TEST_R( "ldr sp, [sp, r",14, 13*4,"]")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+ TEST_SUPPORTED("ldr sp, 99f")
+ TEST_SUPPORTED("ldr pc, 99f")
+
+ TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f")
+ TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]")
+ TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]")
+
+ TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+
+ TEST( "pli [pc, #4]")
+ TEST( "pli [pc, #-4]")
+ TEST( "pld [pc, #4]")
+ TEST( "pld [pc, #-4]")
+
+ TEST_P( "pld [r",0,-1024,", #1024]")
+ TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]")
+ TEST_P( "pli [r",4, 0b,", #1024]")
+ TEST_P( "pld [r",7, 120,", #-120]")
+ TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]")
+ TEST_P( "pli [r",11,120,", #-120]")
+ TEST( "pld [sp, #0]")
+
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]")
+ TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]")
+ TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]");
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]")
+ TEST_R( "pld [sp, r",1, 16,"]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]")
+
+ TEST_GROUP("Data-processing (register)")
+
+#define SHIFTS32(op) \
+ TEST_RR(op" r0, r",1, VAL1,", r",2, 3, "") \
+ TEST_RR(op" r14, r",12,VAL2,", r",11,10,"")
+
+ SHIFTS32("lsl")
+ SHIFTS32("lsls")
+ SHIFTS32("lsr")
+ SHIFTS32("lsrs")
+ SHIFTS32("asr")
+ SHIFTS32("asrs")
+ SHIFTS32("ror")
+ SHIFTS32("rors")
+
+ TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2")
+ TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp");
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
+ TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+
+#define PARALLEL_ADD_SUB(op) \
+ TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"asx r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"asx r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sax r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sax r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"add8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add8 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub8 r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ PARALLEL_ADD_SUB("s")
+ PARALLEL_ADD_SUB("q")
+ PARALLEL_ADD_SUB("sh")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ PARALLEL_ADD_SUB("u")
+ PARALLEL_ADD_SUB("uq")
+ PARALLEL_ADD_SUB("uh")
+
+ TEST_GROUP("Miscellaneous operations")
+
+ TEST_RR("qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qsub lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdsub lr, r",9, VAL2,", r",8, VAL1,"")
+
+ TEST_R("rev.w r0, r",0, VAL1,"")
+ TEST_R("rev r14, r",12, VAL2,"")
+ TEST_R("rev16.w r0, r",0, VAL1,"")
+ TEST_R("rev16 r14, r",12, VAL2,"")
+ TEST_R("rbit r0, r",0, VAL1,"")
+ TEST_R("rbit r14, r",12, VAL2,"")
+ TEST_R("revsh.w r0, r",0, VAL1,"")
+ TEST_R("revsh r14, r",12, VAL2,"")
+
+ TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12");
+ TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12");
+ TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc");
+ TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp");
+
+ TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clz r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+
+ TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+
+ TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9")
+ TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp");
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbt r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+
+ TEST_GROUP("Long multiply, long multiply accumulate, and divide")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp");
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "smlsld r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsld r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlsldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "umaal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umaal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xffff,0xffff")
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("sub.w r0, r0")
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
new file mode 100644
index 0000000..e17cdd6
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.c
@@ -0,0 +1,1748 @@
+/*
+ * arch/arm/kernel/kprobes-test.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains test code for ARM kprobes.
+ *
+ * The top level function run_all_tests() executes tests for all of the
+ * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests
+ * fall into two categories; run_api_tests() checks basic functionality of the
+ * kprobes API, and run_test_cases() is a comprehensive test for kprobes
+ * instruction decoding and simulation.
+ *
+ * run_test_cases() first checks the kprobes decoding table for self consistency
+ * (using table_test()) then executes a series of test cases for each of the CPU
+ * instruction forms. coverage_start() and coverage_end() are used to verify
+ * that these test cases cover all of the possible combinations of instructions
+ * described by the kprobes decoding tables.
+ *
+ * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c
+ * which use the macros defined in kprobes-test.h. The rest of this
+ * documentation will describe the operation of the framework used by these
+ * test cases.
+ */
+
+/*
+ * TESTING METHODOLOGY
+ * -------------------
+ *
+ * The methodology used to test an ARM instruction 'test_insn' is to use
+ * inline assembler like:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ *
+ * When the test case is run a kprobe is placed of each nop. The
+ * post-handler of the test_before probe is used to modify the saved CPU
+ * register context to that which we require for the test case. The
+ * pre-handler of the of the test_after probe saves a copy of the CPU
+ * register context. In this way we can execute test_insn with a specific
+ * register context and see the results afterwards.
+ *
+ * To actually test the kprobes instruction emulation we perform the above
+ * step a second time but with an additional kprobe on the test_case
+ * instruction itself. If the emulation is accurate then the results seen
+ * by the test_after probe will be identical to the first run which didn't
+ * have a probe on test_case.
+ *
+ * Each test case is run several times with a variety of variations in the
+ * flags value of stored in CPSR, and for Thumb code, different ITState.
+ *
+ * For instructions which can modify PC, a second test_after probe is used
+ * like this:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * b test_done
+ * test_after2: nop
+ * test_done:
+ *
+ * The test case is constructed such that test_insn branches to
+ * test_after2, or, if testing a conditional instruction, it may just
+ * continue to test_after. The probes inserted at both locations let us
+ * determine which happened. A similar approach is used for testing
+ * backwards branches...
+ *
+ * b test_before
+ * b test_done @ helps to cope with off by 1 branches
+ * test_after2: nop
+ * b test_done
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * test_done:
+ *
+ * The macros used to generate the assembler instructions describe above
+ * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B
+ * (branch backwards). In these, the local variables numbered 1, 50, 2 and
+ * 99 represent: test_before, test_case, test_after2 and test_done.
+ *
+ * FRAMEWORK
+ * ---------
+ *
+ * Each test case is wrapped between the pair of macros TESTCASE_START and
+ * TESTCASE_END. As well as performing the inline assembler boilerplate,
+ * these call out to the kprobes_test_case_start() and
+ * kprobes_test_case_end() functions which drive the execution of the test
+ * case. The specific arguments to use for each test case are stored as
+ * inline data constructed using the various TEST_ARG_* macros. Putting
+ * this all together, a simple test case may look like:
+ *
+ * TESTCASE_START("Testing mov r0, r7")
+ * TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678
+ * TEST_ARG_END("")
+ * TEST_INSTRUCTION("mov r0, r7")
+ * TESTCASE_END
+ *
+ * Note, in practice the single convenience macro TEST_R would be used for this
+ * instead.
+ *
+ * The above would expand to assembler looking something like:
+ *
+ * @ TESTCASE_START
+ * bl __kprobes_test_case_start
+ * @ start of inline data...
+ * .ascii "mov r0, r7" @ text title for test case
+ * .byte 0
+ * .align 2
+ *
+ * @ TEST_ARG_REG
+ * .byte ARG_TYPE_REG
+ * .byte 7
+ * .short 0
+ * .word 0x1234567
+ *
+ * @ TEST_ARG_END
+ * .byte ARG_TYPE_END
+ * .byte TEST_ISA @ flags, including ISA being tested
+ * .short 50f-0f @ offset of 'test_before'
+ * .short 2f-0f @ offset of 'test_after2' (if relevent)
+ * .short 99f-0f @ offset of 'test_done'
+ * @ start of test case code...
+ * 0:
+ * .code TEST_ISA @ switch to ISA being tested
+ *
+ * @ TEST_INSTRUCTION
+ * 50: nop @ location for 'test_before' probe
+ * 1: mov r0, r7 @ the test case instruction 'test_insn'
+ * nop @ location for 'test_after' probe
+ *
+ * // TESTCASE_END
+ * 2:
+ * 99: bl __kprobes_test_case_end_##TEST_ISA
+ * .code NONMAL_ISA
+ *
+ * When the above is execute the following happens...
+ *
+ * __kprobes_test_case_start() is an assembler wrapper which sets up space
+ * for a stack buffer and calls the C function kprobes_test_case_start().
+ * This C function will do some initial processing of the inline data and
+ * setup some global state. It then inserts the test_before and test_after
+ * kprobes and returns a value which causes the assembler wrapper to jump
+ * to the start of the test case code, (local label '0').
+ *
+ * When the test case code executes, the test_before probe will be hit and
+ * test_before_post_handler will call setup_test_context(). This fills the
+ * stack buffer and CPU registers with a test pattern and then processes
+ * the test case arguments. In our example there is one TEST_ARG_REG which
+ * indicates that R7 should be loaded with the value 0x12345678.
+ *
+ * When the test_before probe ends, the test case continues and executes
+ * the "mov r0, r7" instruction. It then hits the test_after probe and the
+ * pre-handler for this (test_after_pre_handler) will save a copy of the
+ * CPU register context. This should now have R0 holding the same value as
+ * R7.
+ *
+ * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is
+ * an assembler wrapper which switches back to the ISA used by the test
+ * code and calls the C function kprobes_test_case_end().
+ *
+ * For each run through the test case, test_case_run_count is incremented
+ * by one. For even runs, kprobes_test_case_end() saves a copy of the
+ * register and stack buffer contents from the test case just run. It then
+ * inserts a kprobe on the test case instruction 'test_insn' and returns a
+ * value to cause the test case code to be re-run.
+ *
+ * For odd numbered runs, kprobes_test_case_end() compares the register and
+ * stack buffer contents to those that were saved on the previous even
+ * numbered run (the one without the kprobe on test_insn). These should be
+ * the same if the kprobe instruction simulation routine is correct.
+ *
+ * The pair of test case runs is repeated with different combinations of
+ * flag values in CPSR and, for Thumb, different ITState. This is
+ * controlled by test_context_cpsr().
+ *
+ * BUILDING TEST CASES
+ * -------------------
+ *
+ *
+ * As an aid to building test cases, the stack buffer is initialised with
+ * some special values:
+ *
+ * [SP+13*4] Contains SP+120. This can be used to test instructions
+ * which load a value into SP.
+ *
+ * [SP+15*4] When testing branching instructions using TEST_BRANCH_{F,B},
+ * this holds the target address of the branch, 'test_after2'.
+ * This can be used to test instructions which load a PC value
+ * from memory.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+#include "kprobes-test.h"
+
+
+#define BENCHMARKING 1
+
+
+/*
+ * Test basic API
+ */
+
+static bool test_regs_ok;
+static int test_func_instance;
+static int pre_handler_called;
+static int post_handler_called;
+static int jprobe_func_called;
+static int kretprobe_handler_called;
+
+#define FUNC_ARG1 0x12345678
+#define FUNC_ARG2 0xabcdef
+
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+long arm_func(long r0, long r1);
+
+static void __used __naked __arm_kprobes_test_func(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ ".type arm_func, %%function \n\t"
+ "arm_func: \n\t"
+ "adds r0, r0, r1 \n\t"
+ "bx lr \n\t"
+ ".code "NORMAL_ISA /* Back to Thumb if necessary */
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+long thumb16_func(long r0, long r1);
+long thumb32even_func(long r0, long r1);
+long thumb32odd_func(long r0, long r1);
+
+static void __used __naked __thumb_kprobes_test_funcs(void)
+{
+ __asm__ __volatile__ (
+ ".type thumb16_func, %%function \n\t"
+ "thumb16_func: \n\t"
+ "adds.n r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ ".type thumb32even_func, %%function \n\t"
+ "thumb32even_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ "nop.n \n\t"
+ ".type thumb32odd_func, %%function \n\t"
+ "thumb32odd_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+
+static int call_test_func(long (*func)(long, long), bool check_test_regs)
+{
+ long ret;
+
+ ++test_func_instance;
+ test_regs_ok = false;
+
+ ret = (*func)(FUNC_ARG1, FUNC_ARG2);
+ if (ret != FUNC_ARG1 + FUNC_ARG2) {
+ pr_err("FAIL: call_test_func: func returned %lx\n", ret);
+ return false;
+ }
+
+ if (check_test_regs && !test_regs_ok) {
+ pr_err("FAIL: test regs not OK\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ pre_handler_called = test_func_instance;
+ if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ post_handler_called = test_func_instance;
+ if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2)
+ test_regs_ok = false;
+}
+
+static struct kprobe the_kprobe = {
+ .addr = 0,
+ .pre_handler = pre_handler,
+ .post_handler = post_handler
+};
+
+static int test_kprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kprobe.addr = (kprobe_opcode_t *)func;
+ ret = register_kprobe(&the_kprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kprobe(&the_kprobe);
+ the_kprobe.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (pre_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe pre_handler not called\n");
+ return -EINVAL;
+ }
+ if (post_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe post_handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (pre_handler_called == test_func_instance ||
+ post_handler_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __kprobes jprobe_func(long r0, long r1)
+{
+ jprobe_func_called = test_func_instance;
+ if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ jprobe_return();
+}
+
+static struct jprobe the_jprobe = {
+ .entry = jprobe_func,
+};
+
+static int test_jprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_jprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_jprobe(&the_jprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_jprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_jprobe(&the_jprobe);
+ the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (jprobe_func_called != test_func_instance) {
+ pr_err("FAIL: jprobe handler function not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __kprobes
+kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ kretprobe_handler_called = test_func_instance;
+ if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static struct kretprobe the_kretprobe = {
+ .handler = kretprobe_handler,
+};
+
+static int test_kretprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kretprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_kretprobe(&the_kretprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kretprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kretprobe(&the_kretprobe);
+ the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (kretprobe_handler_called != test_func_instance) {
+ pr_err("FAIL: kretprobe handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: kretprobe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int run_api_tests(long (*func)(long, long))
+{
+ int ret;
+
+ pr_info(" kprobe\n");
+ ret = test_kprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" jprobe\n");
+ ret = test_jprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" kretprobe\n");
+ ret = test_kretprobe(func);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+/*
+ * Benchmarking
+ */
+
+#if BENCHMARKING
+
+static void __naked benchmark_nop(void)
+{
+ __asm__ __volatile__ (
+ "nop \n\t"
+ "bx lr"
+ );
+}
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define wide ".w"
+#else
+#define wide
+#endif
+
+static void __naked benchmark_pushpop1(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r3-r11,lr} \n\t"
+ "ldmia"wide" sp!, {r3-r11,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop2(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0-r8,lr} \n\t"
+ "ldmia"wide" sp!, {r0-r8,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop3(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r4,lr} \n\t"
+ "ldmia"wide" sp!, {r4,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop4(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0,lr} \n\t"
+ "ldmia"wide" sp!, {r0,pc}"
+ );
+}
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+static void __naked benchmark_pushpop_thumb(void)
+{
+ __asm__ __volatile__ (
+ "push.n {r0-r7,lr} \n\t"
+ "pop.n {r0-r7,pc}"
+ );
+}
+
+#endif
+
+static int __kprobes
+benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ return 0;
+}
+
+static int benchmark(void(*fn)(void))
+{
+ unsigned n, i, t, t0;
+
+ for (n = 1000; ; n *= 2) {
+ t0 = sched_clock();
+ for (i = n; i > 0; --i)
+ fn();
+ t = sched_clock() - t0;
+ if (t >= 250000000)
+ break; /* Stop once we took more than 0.25 seconds */
+ }
+ return t / n; /* Time for one iteration in nanoseconds */
+};
+
+static int kprobe_benchmark(void(*fn)(void), unsigned offset)
+{
+ struct kprobe k = {
+ .addr = (kprobe_opcode_t *)((uintptr_t)fn + offset),
+ .pre_handler = benchmark_pre_handler,
+ };
+
+ int ret = register_kprobe(&k);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = benchmark(fn);
+
+ unregister_kprobe(&k);
+ return ret;
+};
+
+struct benchmarks {
+ void (*fn)(void);
+ unsigned offset;
+ const char *title;
+};
+
+static int run_benchmarks(void)
+{
+ int ret;
+ struct benchmarks list[] = {
+ {&benchmark_nop, 0, "nop"},
+ /*
+ * benchmark_pushpop{1,3} will have the optimised
+ * instruction emulation, whilst benchmark_pushpop{2,4} will
+ * be the equivalent unoptimised instructions.
+ */
+ {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"},
+ {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"},
+ {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"},
+ {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"},
+ {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"},
+ {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"},
+ {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"},
+ {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"},
+#ifdef CONFIG_THUMB2_KERNEL
+ {&benchmark_pushpop_thumb, 0, "push.n {r0-r7,lr}"},
+ {&benchmark_pushpop_thumb, 2, "pop.n {r0-r7,pc}"},
+#endif
+ {0}
+ };
+
+ struct benchmarks *b;
+ for (b = list; b->fn; ++b) {
+ ret = kprobe_benchmark(b->fn, b->offset);
+ if (ret < 0)
+ return ret;
+ pr_info(" %dns for kprobe %s\n", ret, b->title);
+ }
+
+ pr_info("\n");
+ return 0;
+}
+
+#endif /* BENCHMARKING */
+
+
+/*
+ * Decoding table self-consistency tests
+ */
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+ [DECODE_TYPE_TABLE] = sizeof(struct decode_table),
+ [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom),
+ [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate),
+ [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate),
+ [DECODE_TYPE_OR] = sizeof(struct decode_or),
+ [DECODE_TYPE_REJECT] = sizeof(struct decode_reject)
+};
+
+static int table_iter(const union decode_item *table,
+ int (*fn)(const struct decode_header *, void *),
+ void *args)
+{
+ const struct decode_header *h = (struct decode_header *)table;
+ int result;
+
+ for (;;) {
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (type == DECODE_TYPE_END)
+ return 0;
+
+ result = fn(h, args);
+ if (result)
+ return result;
+
+ h = (struct decode_header *)
+ ((uintptr_t)h + decode_struct_sizes[type]);
+
+ }
+}
+
+static int table_test_fail(const struct decode_header *h, const char* message)
+{
+
+ pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",
+ message, h->mask.bits, h->value.bits);
+ return -EINVAL;
+}
+
+struct table_test_args {
+ const union decode_item *root_table;
+ u32 parent_mask;
+ u32 parent_value;
+};
+
+static int table_test_fn(const struct decode_header *h, void *args)
+{
+ struct table_test_args *a = (struct table_test_args *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (h->value.bits & ~h->mask.bits)
+ return table_test_fail(h, "Match value has bits not in mask");
+
+ if ((h->mask.bits & a->parent_mask) != a->parent_mask)
+ return table_test_fail(h, "Mask has bits not in parent mask");
+
+ if ((h->value.bits ^ a->parent_value) & a->parent_mask)
+ return table_test_fail(h, "Value is inconsistent with parent");
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ struct table_test_args args2 = *a;
+ args2.parent_mask = h->mask.bits;
+ args2.parent_value = h->value.bits;
+ return table_iter(d->table.table, table_test_fn, &args2);
+ }
+
+ return 0;
+}
+
+static int table_test(const union decode_item *table)
+{
+ struct table_test_args args = {
+ .root_table = table,
+ .parent_mask = 0,
+ .parent_value = 0
+ };
+ return table_iter(args.root_table, table_test_fn, &args);
+}
+
+
+/*
+ * Decoding table test coverage analysis
+ *
+ * coverage_start() builds a coverage_table which contains a list of
+ * coverage_entry's to match each entry in the specified kprobes instruction
+ * decoding table.
+ *
+ * When test cases are run, coverage_add() is called to process each case.
+ * This looks up the corresponding entry in the coverage_table and sets it as
+ * being matched, as well as clearing the regs flag appropriate for the test.
+ *
+ * After all test cases have been run, coverage_end() is called to check that
+ * all entries in coverage_table have been matched and that all regs flags are
+ * cleared. I.e. that all possible combinations of instructions described by
+ * the kprobes decoding tables have had a test case executed for them.
+ */
+
+bool coverage_fail;
+
+#define MAX_COVERAGE_ENTRIES 256
+
+struct coverage_entry {
+ const struct decode_header *header;
+ unsigned regs;
+ unsigned nesting;
+ char matched;
+};
+
+struct coverage_table {
+ struct coverage_entry *base;
+ unsigned num_entries;
+ unsigned nesting;
+};
+
+struct coverage_table coverage;
+
+#define COVERAGE_ANY_REG (1<<0)
+#define COVERAGE_SP (1<<1)
+#define COVERAGE_PC (1<<2)
+#define COVERAGE_PCWB (1<<3)
+
+static const char coverage_register_lookup[16] = {
+ [REG_TYPE_ANY] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_SAMEAS16] = COVERAGE_ANY_REG,
+ [REG_TYPE_SP] = COVERAGE_SP,
+ [REG_TYPE_PC] = COVERAGE_PC,
+ [REG_TYPE_NOSP] = COVERAGE_ANY_REG | COVERAGE_SP,
+ [REG_TYPE_NOSPPC] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_NOPC] = COVERAGE_ANY_REG | COVERAGE_PC,
+ [REG_TYPE_NOPCWB] = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB,
+ [REG_TYPE_NOPCX] = COVERAGE_ANY_REG,
+ [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP,
+};
+
+unsigned coverage_start_registers(const struct decode_header *h)
+{
+ unsigned regs = 0;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf;
+ regs |= coverage_register_lookup[r] << i;
+ }
+ return regs;
+}
+
+static int coverage_start_fn(const struct decode_header *h, void *args)
+{
+ struct coverage_table *coverage = (struct coverage_table *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+ struct coverage_entry *entry = coverage->base + coverage->num_entries;
+
+ if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) {
+ pr_err("FAIL: Out of space for test coverage data");
+ return -ENOMEM;
+ }
+
+ ++coverage->num_entries;
+
+ entry->header = h;
+ entry->regs = coverage_start_registers(h);
+ entry->nesting = coverage->nesting;
+ entry->matched = false;
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ int ret;
+ ++coverage->nesting;
+ ret = table_iter(d->table.table, coverage_start_fn, coverage);
+ --coverage->nesting;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int coverage_start(const union decode_item *table)
+{
+ coverage.base = kmalloc(MAX_COVERAGE_ENTRIES *
+ sizeof(struct coverage_entry), GFP_KERNEL);
+ coverage.num_entries = 0;
+ coverage.nesting = 0;
+ return table_iter(table, coverage_start_fn, &coverage);
+}
+
+static void
+coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn)
+{
+ int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ enum decode_reg_type reg_type = (regs >> i) & 0xf;
+ int reg = (insn >> i) & 0xf;
+ int flag;
+
+ if (!reg_type)
+ continue;
+
+ if (reg == 13)
+ flag = COVERAGE_SP;
+ else if (reg == 15)
+ flag = COVERAGE_PC;
+ else
+ flag = COVERAGE_ANY_REG;
+ entry->regs &= ~(flag << i);
+
+ switch (reg_type) {
+
+ case REG_TYPE_NONE:
+ case REG_TYPE_ANY:
+ case REG_TYPE_SAMEAS16:
+ break;
+
+ case REG_TYPE_SP:
+ if (reg != 13)
+ return;
+ break;
+
+ case REG_TYPE_PC:
+ if (reg != 15)
+ return;
+ break;
+
+ case REG_TYPE_NOSP:
+ if (reg == 13)
+ return;
+ break;
+
+ case REG_TYPE_NOSPPC:
+ case REG_TYPE_NOSPPCX:
+ if (reg == 13 || reg == 15)
+ return;
+ break;
+
+ case REG_TYPE_NOPCWB:
+ if (!is_writeback(insn))
+ break;
+ if (reg == 15) {
+ entry->regs &= ~(COVERAGE_PCWB << i);
+ return;
+ }
+ break;
+
+ case REG_TYPE_NOPC:
+ case REG_TYPE_NOPCX:
+ if (reg == 15)
+ return;
+ break;
+ }
+
+ }
+}
+
+static void coverage_add(kprobe_opcode_t insn)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+ bool matched = false;
+ unsigned nesting = 0;
+
+ for (; entry < end; ++entry) {
+ const struct decode_header *h = entry->header;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (entry->nesting > nesting)
+ continue; /* Skip sub-table we didn't match */
+
+ if (entry->nesting < nesting)
+ break; /* End of sub-table we were scanning */
+
+ if (!matched) {
+ if ((insn & h->mask.bits) != h->value.bits)
+ continue;
+ entry->matched = true;
+ }
+
+ switch (type) {
+
+ case DECODE_TYPE_TABLE:
+ ++nesting;
+ break;
+
+ case DECODE_TYPE_CUSTOM:
+ case DECODE_TYPE_SIMULATE:
+ case DECODE_TYPE_EMULATE:
+ coverage_add_registers(entry, insn);
+ return;
+
+ case DECODE_TYPE_OR:
+ matched = true;
+ break;
+
+ case DECODE_TYPE_REJECT:
+ default:
+ return;
+ }
+
+ }
+}
+
+static void coverage_end(void)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+
+ for (; entry < end; ++entry) {
+ u32 mask = entry->header->mask.bits;
+ u32 value = entry->header->value.bits;
+
+ if (entry->regs) {
+ pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",
+ mask, value, entry->regs);
+ coverage_fail = true;
+ }
+ if (!entry->matched) {
+ pr_err("FAIL: Test coverage entry missing for %08x %08x\n",
+ mask, value);
+ coverage_fail = true;
+ }
+ }
+
+ kfree(coverage.base);
+}
+
+
+/*
+ * Framework for instruction set test cases
+ */
+
+void __naked __kprobes_test_case_start(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r4-r11} \n\t"
+ "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "bic r0, lr, #1 @ r0 = inline title string \n\t"
+ "mov r1, sp \n\t"
+ "bl kprobes_test_case_start \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "movne pc, r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "mov pc, r0 \n\t"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+void __naked __kprobes_test_case_end_16(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "bxne r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ "orr lr, lr, #1 @ will return to Thumb code \n\t"
+ "ldr pc, 1f \n\t"
+ "1: \n\t"
+ ".word __kprobes_test_case_end_16 \n\t"
+ );
+}
+
+#endif
+
+
+int kprobe_test_flags;
+int kprobe_test_cc_position;
+
+static int test_try_count;
+static int test_pass_count;
+static int test_fail_count;
+
+static struct pt_regs initial_regs;
+static struct pt_regs expected_regs;
+static struct pt_regs result_regs;
+
+static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)];
+
+static const char *current_title;
+static struct test_arg *current_args;
+static u32 *current_stack;
+static uintptr_t current_branch_target;
+
+static uintptr_t current_code_start;
+static kprobe_opcode_t current_instruction;
+
+
+#define TEST_CASE_PASSED -1
+#define TEST_CASE_FAILED -2
+
+static int test_case_run_count;
+static bool test_case_is_thumb;
+static int test_instance;
+
+/*
+ * We ignore the state of the imprecise abort disable flag (CPSR.A) because this
+ * can change randomly as the kernel doesn't take care to preserve or initialise
+ * this across context switches. Also, with Security Extentions, the flag may
+ * not be under control of the kernel; for this reason we ignore the state of
+ * the FIQ disable flag CPSR.F as well.
+ */
+#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT)
+
+static unsigned long test_check_cc(int cc, unsigned long cpsr)
+{
+ unsigned long temp;
+
+ switch (cc) {
+ case 0x0: /* eq */
+ return cpsr & PSR_Z_BIT;
+
+ case 0x1: /* ne */
+ return (~cpsr) & PSR_Z_BIT;
+
+ case 0x2: /* cs */
+ return cpsr & PSR_C_BIT;
+
+ case 0x3: /* cc */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0x4: /* mi */
+ return cpsr & PSR_N_BIT;
+
+ case 0x5: /* pl */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0x6: /* vs */
+ return cpsr & PSR_V_BIT;
+
+ case 0x7: /* vc */
+ return (~cpsr) & PSR_V_BIT;
+
+ case 0x8: /* hi */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
+
+ case 0x9: /* ls */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0xa: /* ge */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0xb: /* lt */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+
+ case 0xc: /* gt */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+
+ case 0xd: /* le */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+
+ case 0xe: /* al */
+ case 0xf: /* unconditional */
+ return true;
+ }
+ BUG();
+ return false;
+}
+
+static int is_last_scenario;
+static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */
+static int memory_needs_checking;
+
+static unsigned long test_context_cpsr(int scenario)
+{
+ unsigned long cpsr;
+
+ probe_should_run = 1;
+
+ /* Default case is that we cycle through 16 combinations of flags */
+ cpsr = (scenario & 0xf) << 28; /* N,Z,C,V flags */
+ cpsr |= (scenario & 0xf) << 16; /* GE flags */
+ cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */
+
+ if (!test_case_is_thumb) {
+ /* Testing ARM code */
+ probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) {
+ /* Testing Thumb code without setting ITSTATE */
+ if (kprobe_test_cc_position) {
+ int cc = (current_instruction >> kprobe_test_cc_position) & 0xf;
+ probe_should_run = test_check_cc(cc, cpsr) != 0;
+ }
+
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) {
+ /* Testing Thumb code with all combinations of ITSTATE */
+ unsigned x = (scenario >> 4);
+ unsigned cond_base = x % 7; /* ITSTATE<7:5> */
+ unsigned mask = x / 7 + 2; /* ITSTATE<4:0>, bits reversed */
+
+ if (mask > 0x1f) {
+ /* Finish by testing state from instruction 'itt al' */
+ cond_base = 7;
+ mask = 0x4;
+ if ((scenario & 0xf) == 0xf)
+ is_last_scenario = true;
+ }
+
+ cpsr |= cond_base << 13; /* ITSTATE<7:5> */
+ cpsr |= (mask & 0x1) << 12; /* ITSTATE<4> */
+ cpsr |= (mask & 0x2) << 10; /* ITSTATE<3> */
+ cpsr |= (mask & 0x4) << 8; /* ITSTATE<2> */
+ cpsr |= (mask & 0x8) << 23; /* ITSTATE<1> */
+ cpsr |= (mask & 0x10) << 21; /* ITSTATE<0> */
+
+ probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0;
+
+ } else {
+ /* Testing Thumb code with several combinations of ITSTATE */
+ switch (scenario) {
+ case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */
+ cpsr = 0x00000800;
+ probe_should_run = 0;
+ break;
+ case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */
+ cpsr = 0xf0007800;
+ probe_should_run = 0;
+ break;
+ case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */
+ cpsr = 0x00009800;
+ break;
+ case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */
+ cpsr = 0xf0002800;
+ is_last_scenario = true;
+ break;
+ }
+ }
+
+ return cpsr;
+}
+
+static void setup_test_context(struct pt_regs *regs)
+{
+ int scenario = test_case_run_count>>1;
+ unsigned long val;
+ struct test_arg *args;
+ int i;
+
+ is_last_scenario = false;
+ memory_needs_checking = false;
+
+ /* Initialise test memory on stack */
+ val = (scenario & 1) ? VALM : ~VALM;
+ for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i)
+ current_stack[i] = val + (i << 8);
+ /* Put target of branch on stack for tests which load PC from memory */
+ if (current_branch_target)
+ current_stack[15] = current_branch_target;
+ /* Put a value for SP on stack for tests which load SP from memory */
+ current_stack[13] = (u32)current_stack + 120;
+
+ /* Initialise register values to their default state */
+ val = (scenario & 2) ? VALR : ~VALR;
+ for (i = 0; i < 13; ++i)
+ regs->uregs[i] = val ^ (i << 8);
+ regs->ARM_lr = val ^ (14 << 8);
+ regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK);
+ regs->ARM_cpsr |= test_context_cpsr(scenario);
+
+ /* Perform testcase specific register setup */
+ args = current_args;
+ for (; args[0].type != ARG_TYPE_END; ++args)
+ switch (args[0].type) {
+ case ARG_TYPE_REG: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] = arg->val;
+ break;
+ }
+ case ARG_TYPE_PTR: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] =
+ (unsigned long)current_stack + arg->val;
+ memory_needs_checking = true;
+ break;
+ }
+ case ARG_TYPE_MEM: {
+ struct test_arg_mem *arg = (struct test_arg_mem *)args;
+ current_stack[arg->index] = arg->val;
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+struct test_probe {
+ struct kprobe kprobe;
+ bool registered;
+ int hit;
+};
+
+static void unregister_test_probe(struct test_probe *probe)
+{
+ if (probe->registered) {
+ unregister_kprobe(&probe->kprobe);
+ probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */
+ }
+ probe->registered = false;
+}
+
+static int register_test_probe(struct test_probe *probe)
+{
+ int ret;
+
+ if (probe->registered)
+ BUG();
+
+ ret = register_kprobe(&probe->kprobe);
+ if (ret >= 0) {
+ probe->registered = true;
+ probe->hit = -1;
+ }
+ return ret;
+}
+
+static int __kprobes
+test_before_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static void __kprobes
+test_before_post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ setup_test_context(regs);
+ initial_regs = *regs;
+ initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+}
+
+static int __kprobes
+test_case_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static int __kprobes
+test_after_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ if (container_of(p, struct test_probe, kprobe)->hit == test_instance)
+ return 0; /* Already run for this test instance */
+
+ result_regs = *regs;
+ result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+
+ /* Undo any changes done to SP by the test case */
+ regs->ARM_sp = (unsigned long)current_stack;
+
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static struct test_probe test_before_probe = {
+ .kprobe.pre_handler = test_before_pre_handler,
+ .kprobe.post_handler = test_before_post_handler,
+};
+
+static struct test_probe test_case_probe = {
+ .kprobe.pre_handler = test_case_pre_handler,
+};
+
+static struct test_probe test_after_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static struct test_probe test_after2_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static void test_case_cleanup(void)
+{
+ unregister_test_probe(&test_before_probe);
+ unregister_test_probe(&test_case_probe);
+ unregister_test_probe(&test_after_probe);
+ unregister_test_probe(&test_after2_probe);
+}
+
+static void print_registers(struct pt_regs *regs)
+{
+ pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n",
+ regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
+ pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n",
+ regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7);
+ pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n",
+ regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp);
+ pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n",
+ regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc);
+ pr_err("cpsr %08lx\n", regs->ARM_cpsr);
+}
+
+static void print_memory(u32 *mem, size_t size)
+{
+ int i;
+ for (i = 0; i < size / sizeof(u32); i += 4)
+ pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],
+ mem[i+2], mem[i+3]);
+}
+
+static size_t expected_memory_size(u32 *sp)
+{
+ size_t size = sizeof(expected_memory);
+ int offset = (uintptr_t)sp - (uintptr_t)current_stack;
+ if (offset > 0)
+ size -= offset;
+ return size;
+}
+
+static void test_case_failed(const char *message)
+{
+ test_case_cleanup();
+
+ pr_err("FAIL: %s\n", message);
+ pr_err("FAIL: Test %s\n", current_title);
+ pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);
+}
+
+static unsigned long next_instruction(unsigned long pc)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+ if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+ return pc + 2;
+ else
+#endif
+ return pc + 4;
+}
+
+static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
+{
+ struct test_arg *args;
+ struct test_arg_end *end_arg;
+ unsigned long test_code;
+
+ args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
+
+ current_title = title;
+ current_args = args;
+ current_stack = stack;
+
+ ++test_try_count;
+
+ while (args->type != ARG_TYPE_END)
+ ++args;
+ end_arg = (struct test_arg_end *)args;
+
+ test_code = (unsigned long)(args + 1); /* Code starts after args */
+
+ test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB;
+ if (test_case_is_thumb)
+ test_code |= 1;
+
+ current_code_start = test_code;
+
+ current_branch_target = 0;
+ if (end_arg->branch_offset != end_arg->end_offset)
+ current_branch_target = test_code + end_arg->branch_offset;
+
+ test_code += end_arg->code_offset;
+ test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ test_code = next_instruction(test_code);
+ test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (test_case_is_thumb) {
+ u16 *p = (u16 *)(test_code & ~1);
+ current_instruction = p[0];
+ if (is_wide_instruction(current_instruction)) {
+ current_instruction <<= 16;
+ current_instruction |= p[1];
+ }
+ } else {
+ current_instruction = *(u32 *)test_code;
+ }
+
+ if (current_title[0] == '.')
+ verbose("%s\n", current_title);
+ else
+ verbose("%s\t@ %0*x\n", current_title,
+ test_case_is_thumb ? 4 : 8,
+ current_instruction);
+
+ test_code = next_instruction(test_code);
+ test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) {
+ if (!test_case_is_thumb ||
+ is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 16-bit instruction");
+ goto fail;
+ }
+ } else {
+ if (test_case_is_thumb &&
+ !is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 32-bit instruction");
+ goto fail;
+ }
+ }
+
+ coverage_add(current_instruction);
+
+ if (end_arg->flags & ARG_FLAG_UNSUPPORTED) {
+ if (register_test_probe(&test_case_probe) < 0)
+ goto pass;
+ test_case_failed("registered probe for unsupported instruction");
+ goto fail;
+ }
+
+ if (end_arg->flags & ARG_FLAG_SUPPORTED) {
+ if (register_test_probe(&test_case_probe) >= 0)
+ goto pass;
+ test_case_failed("couldn't register probe for supported instruction");
+ goto fail;
+ }
+
+ if (register_test_probe(&test_before_probe) < 0) {
+ test_case_failed("register test_before_probe failed");
+ goto fail;
+ }
+ if (register_test_probe(&test_after_probe) < 0) {
+ test_case_failed("register test_after_probe failed");
+ goto fail;
+ }
+ if (current_branch_target) {
+ test_after2_probe.kprobe.addr =
+ (kprobe_opcode_t *)current_branch_target;
+ if (register_test_probe(&test_after2_probe) < 0) {
+ test_case_failed("register test_after2_probe failed");
+ goto fail;
+ }
+ }
+
+ /* Start first run of test case */
+ test_case_run_count = 0;
+ ++test_instance;
+ return current_code_start;
+pass:
+ test_case_run_count = TEST_CASE_PASSED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+fail:
+ test_case_run_count = TEST_CASE_FAILED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+}
+
+static bool check_test_results(void)
+{
+ size_t mem_size = 0;
+ u32 *mem = 0;
+
+ if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) {
+ test_case_failed("registers differ");
+ goto fail;
+ }
+
+ if (memory_needs_checking) {
+ mem = (u32 *)result_regs.ARM_sp;
+ mem_size = expected_memory_size(mem);
+ if (memcmp(expected_memory, mem, mem_size)) {
+ test_case_failed("test memory differs");
+ goto fail;
+ }
+ }
+
+ return true;
+
+fail:
+ pr_err("initial_regs:\n");
+ print_registers(&initial_regs);
+ pr_err("expected_regs:\n");
+ print_registers(&expected_regs);
+ pr_err("result_regs:\n");
+ print_registers(&result_regs);
+
+ if (mem) {
+ pr_err("current_stack=%p\n", current_stack);
+ pr_err("expected_memory:\n");
+ print_memory(expected_memory, mem_size);
+ pr_err("result_memory:\n");
+ print_memory(mem, mem_size);
+ }
+
+ return false;
+}
+
+static uintptr_t __used kprobes_test_case_end(void)
+{
+ if (test_case_run_count < 0) {
+ if (test_case_run_count == TEST_CASE_PASSED)
+ /* kprobes_test_case_start did all the needed testing */
+ goto pass;
+ else
+ /* kprobes_test_case_start failed */
+ goto fail;
+ }
+
+ if (test_before_probe.hit != test_instance) {
+ test_case_failed("test_before_handler not run");
+ goto fail;
+ }
+
+ if (test_after_probe.hit != test_instance &&
+ test_after2_probe.hit != test_instance) {
+ test_case_failed("test_after_handler not run");
+ goto fail;
+ }
+
+ /*
+ * Even numbered test runs ran without a probe on the test case so
+ * we can gather reference results. The subsequent odd numbered run
+ * will have the probe inserted.
+ */
+ if ((test_case_run_count & 1) == 0) {
+ /* Save results from run without probe */
+ u32 *mem = (u32 *)result_regs.ARM_sp;
+ expected_regs = result_regs;
+ memcpy(expected_memory, mem, expected_memory_size(mem));
+
+ /* Insert probe onto test case instruction */
+ if (register_test_probe(&test_case_probe) < 0) {
+ test_case_failed("register test_case_probe failed");
+ goto fail;
+ }
+ } else {
+ /* Check probe ran as expected */
+ if (probe_should_run == 1) {
+ if (test_case_probe.hit != test_instance) {
+ test_case_failed("test_case_handler not run");
+ goto fail;
+ }
+ } else if (probe_should_run == 0) {
+ if (test_case_probe.hit == test_instance) {
+ test_case_failed("test_case_handler ran");
+ goto fail;
+ }
+ }
+
+ /* Remove probe for any subsequent reference run */
+ unregister_test_probe(&test_case_probe);
+
+ if (!check_test_results())
+ goto fail;
+
+ if (is_last_scenario)
+ goto pass;
+ }
+
+ /* Do next test run */
+ ++test_case_run_count;
+ ++test_instance;
+ return current_code_start;
+fail:
+ ++test_fail_count;
+ goto end;
+pass:
+ ++test_pass_count;
+end:
+ test_case_cleanup();
+ return 0;
+}
+
+
+/*
+ * Top level test functions
+ */
+
+static int run_test_cases(void (*tests)(void), const union decode_item *table)
+{
+ int ret;
+
+ pr_info(" Check decoding tables\n");
+ ret = table_test(table);
+ if (ret)
+ return ret;
+
+ pr_info(" Run test cases\n");
+ ret = coverage_start(table);
+ if (ret)
+ return ret;
+
+ tests();
+
+ coverage_end();
+ return 0;
+}
+
+
+static int __init run_all_tests(void)
+{
+ int ret = 0;
+
+ pr_info("Begining kprobe tests...\n");
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+ pr_info("Probe ARM code\n");
+ ret = run_api_tests(arm_func);
+ if (ret)
+ goto out;
+
+ pr_info("ARM instruction simulation\n");
+ ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
+ if (ret)
+ goto out;
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+ pr_info("Probe 16-bit Thumb code\n");
+ ret = run_api_tests(thumb16_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, even halfword\n");
+ ret = run_api_tests(thumb32even_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, odd halfword\n");
+ ret = run_api_tests(thumb32odd_func);
+ if (ret)
+ goto out;
+
+ pr_info("16-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb16_test_cases,
+ kprobe_decode_thumb16_table);
+ if (ret)
+ goto out;
+
+ pr_info("32-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb32_test_cases,
+ kprobe_decode_thumb32_table);
+ if (ret)
+ goto out;
+#endif
+
+ pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n",
+ test_try_count, test_pass_count, test_fail_count);
+ if (test_fail_count) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+#if BENCHMARKING
+ pr_info("Benchmarks\n");
+ ret = run_benchmarks();
+ if (ret)
+ goto out;
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ /* We are able to run all test cases so coverage should be complete */
+ if (coverage_fail) {
+ pr_err("FAIL: Test coverage checks failed\n");
+ ret = -EINVAL;
+ goto out;
+ }
+#endif
+
+out:
+ if (ret == 0)
+ pr_info("Finished kprobe tests OK\n");
+ else
+ pr_err("kprobe tests failed\n");
+
+ return ret;
+}
+
+
+/*
+ * Module setup
+ */
+
+#ifdef MODULE
+
+static void __exit kprobe_test_exit(void)
+{
+}
+
+module_init(run_all_tests)
+module_exit(kprobe_test_exit)
+MODULE_LICENSE("GPL");
+
+#else /* !MODULE */
+
+late_initcall(run_all_tests);
+
+#endif
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
new file mode 100644
index 0000000..0dc5d77
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.h
@@ -0,0 +1,392 @@
+/*
+ * arch/arm/kernel/kprobes-test.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define VERBOSE 0 /* Set to '1' for more logging of test cases */
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define NORMAL_ISA "16"
+#else
+#define NORMAL_ISA "32"
+#endif
+
+
+/* Flags used in kprobe_test_flags */
+#define TEST_FLAG_NO_ITBLOCK (1<<0)
+#define TEST_FLAG_FULL_ITBLOCK (1<<1)
+#define TEST_FLAG_NARROW_INSTR (1<<2)
+
+extern int kprobe_test_flags;
+extern int kprobe_test_cc_position;
+
+
+#define TEST_MEMORY_SIZE 256
+
+
+/*
+ * Test case structures.
+ *
+ * The arguments given to test cases can be one of three types.
+ *
+ * ARG_TYPE_REG
+ * Load a register with the given value.
+ *
+ * ARG_TYPE_PTR
+ * Load a register with a pointer into the stack buffer (SP + given value).
+ *
+ * ARG_TYPE_MEM
+ * Store the given value into the stack buffer at [SP+index].
+ *
+ */
+
+#define ARG_TYPE_END 0
+#define ARG_TYPE_REG 1
+#define ARG_TYPE_PTR 2
+#define ARG_TYPE_MEM 3
+
+#define ARG_FLAG_UNSUPPORTED 0x01
+#define ARG_FLAG_SUPPORTED 0x02
+#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */
+#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */
+
+struct test_arg {
+ u8 type; /* ARG_TYPE_x */
+ u8 _padding[7];
+};
+
+struct test_arg_regptr {
+ u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */
+ u8 reg;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_mem {
+ u8 type; /* ARG_TYPE_MEM */
+ u8 index;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_end {
+ u8 type; /* ARG_TYPE_END */
+ u8 flags; /* ARG_FLAG_x */
+ u16 code_offset;
+ u16 branch_offset;
+ u16 end_offset;
+};
+
+
+/*
+ * Building blocks for test cases.
+ *
+ * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
+ *
+ * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
+ * used followed by a terminating TEST_ARG_END.
+ *
+ * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
+ * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
+ *
+ * Some specific test cases may make use of other custom constructs.
+ */
+
+#if VERBOSE
+#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
+#else
+#define verbose(fmt, ...)
+#endif
+
+#define TEST_GROUP(title) \
+ verbose("\n"); \
+ verbose(title"\n"); \
+ verbose("---------------------------------------------------------\n");
+
+#define TESTCASE_START(title) \
+ __asm__ __volatile__ ( \
+ "bl __kprobes_test_case_start \n\t" \
+ /* don't use .asciz here as 'title' may be */ \
+ /* multiple strings to be concatenated. */ \
+ ".ascii "#title" \n\t" \
+ ".byte 0 \n\t" \
+ ".align 2 \n\t"
+
+#define TEST_ARG_REG(reg, val) \
+ ".byte "__stringify(ARG_TYPE_REG)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_PTR(reg, val) \
+ ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_MEM(index, val) \
+ ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \
+ ".byte "#index" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_END(flags) \
+ ".byte "__stringify(ARG_TYPE_END)" \n\t" \
+ ".byte "TEST_ISA flags" \n\t" \
+ ".short 50f-0f \n\t" \
+ ".short 2f-0f \n\t" \
+ ".short 99f-0f \n\t" \
+ ".code "TEST_ISA" \n\t" \
+ "0: \n\t"
+
+#define TEST_INSTRUCTION(instruction) \
+ "50: nop \n\t" \
+ "1: "instruction" \n\t" \
+ " nop \n\t"
+
+#define TEST_BRANCH_F(instruction, xtra_dist) \
+ TEST_INSTRUCTION(instruction) \
+ ".if "#xtra_dist" \n\t" \
+ " b 99f \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t"
+
+#define TEST_BRANCH_B(instruction, xtra_dist) \
+ " b 50f \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t" \
+ " b 99f \n\t" \
+ ".if "#xtra_dist" \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ TEST_INSTRUCTION(instruction)
+
+#define TESTCASE_END \
+ "2: \n\t" \
+ "99: \n\t" \
+ " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \
+ ".code "NORMAL_ISA" \n\t" \
+ : : \
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \
+ );
+
+
+/*
+ * Macros to define test cases.
+ *
+ * Those of the form TEST_{R,P,M}* can be used to define test cases
+ * which take combinations of the three basic types of arguments. E.g.
+ *
+ * TEST_R One register argument
+ * TEST_RR Two register arguments
+ * TEST_RPR A register, a pointer, then a register argument
+ *
+ * For testing instructions which may branch, there are macros TEST_BF_*
+ * and TEST_BB_* for branching forwards and backwards.
+ *
+ * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
+ * the just verify that a kprobe is or is not allowed on the given instruction.
+ */
+
+#define TEST(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_UNSUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_SUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg code2) \
+ TESTCASE_END
+
+#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_REG(reg4, val4) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TESTCASE_END
+
+#define TEST_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2) \
+ TESTCASE_END
+
+#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_PTR(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_BF_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2, 0) \
+ TESTCASE_END
+
+#define TEST_BF_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF(code) TEST_BF_X(code, 0)
+#define TEST_BB(code) TEST_BB_X(code, 0)
+
+#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
+#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
+
+#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
+ TESTCASE_END
+
+#define TEST_X(code, codex) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RX(code1, reg, val, code2, codex) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg) code2) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+
+/* Various values used in test cases... */
+#define N(val) (val ^ 0xffffffff)
+#define VAL1 0x12345678
+#define VAL2 N(VAL1)
+#define VAL3 0xa5f801
+#define VAL4 N(VAL3)
+#define VALM 0x456789ab
+#define VALR 0xdeaddead
+#define HH1 0x0123fecb
+#define HH2 0xa9874567
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+void kprobe_thumb16_test_cases(void);
+void kprobe_thumb32_test_cases(void);
+#else
+void kprobe_arm_test_cases(void);
+#endif
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 902ca59..8f96ec7 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -943,6 +944,9 @@
*/
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
+#endif
static void __kprobes
t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
@@ -1423,6 +1427,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
+#endif
static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
{
diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h
index a6aeda0..38945f7 100644
--- a/arch/arm/kernel/kprobes.h
+++ b/arch/arm/kernel/kprobes.h
@@ -413,6 +413,14 @@
DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+#ifdef CONFIG_THUMB2_KERNEL
+extern const union decode_item kprobe_decode_thumb16_table[];
+extern const union decode_item kprobe_decode_thumb32_table[];
+#else
+extern const union decode_item kprobe_decode_arm_table[];
+#endif
+
+
int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
const union decode_item *table, bool thumb16);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 53c9c26..e6e5d7c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -12,6 +12,7 @@
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
+#include <linux/bitmap.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -26,16 +27,8 @@
#include <asm/pmu.h>
#include <asm/stacktrace.h>
-static struct platform_device *pmu_device;
-
/*
- * Hardware lock to serialize accesses to PMU registers. Needed for the
- * read/modify/write sequences.
- */
-static DEFINE_RAW_SPINLOCK(pmu_lock);
-
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
* another platform that supports more, we need to increase this to be the
* largest of all platforms.
*
@@ -43,62 +36,24 @@
* cycle counter CCNT + 31 events counters CNT0..30.
* Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
*/
-#define ARMPMU_MAX_HWEVENTS 33
+#define ARMPMU_MAX_HWEVENTS 32
-/* The events for a given CPU. */
-struct cpu_hw_events {
- /*
- * The events that are active on the CPU for the given index. Index 0
- * is reserved.
- */
- struct perf_event *events[ARMPMU_MAX_HWEVENTS];
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
- /*
- * A 1 bit for an index indicates that the counter is being used for
- * an event. A 0 means that the counter can be used.
- */
- unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-
- /*
- * A 1 bit for an index indicates that the counter is actively being
- * used.
- */
- unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-};
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-struct arm_pmu {
- enum arm_perf_pmu_ids id;
- const char *name;
- irqreturn_t (*handle_irq)(int irq_num, void *dev);
- void (*enable)(struct hw_perf_event *evt, int idx);
- void (*disable)(struct hw_perf_event *evt, int idx);
- int (*get_event_idx)(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc);
- u32 (*read_counter)(int idx);
- void (*write_counter)(int idx, u32 val);
- void (*start)(void);
- void (*stop)(void);
- void (*reset)(void *);
- const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
- const unsigned (*event_map)[PERF_COUNT_HW_MAX];
- u32 raw_event_mask;
- int num_events;
- u64 max_period;
-};
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
/* Set at runtime when we know what CPU type we are. */
-static const struct arm_pmu *armpmu;
+static struct arm_pmu *cpu_pmu;
enum arm_perf_pmu_ids
armpmu_get_pmu_id(void)
{
int id = -ENODEV;
- if (armpmu != NULL)
- id = armpmu->id;
+ if (cpu_pmu != NULL)
+ id = cpu_pmu->id;
return id;
}
@@ -109,8 +64,8 @@
{
int max_events = 0;
- if (armpmu != NULL)
- max_events = armpmu->num_events;
+ if (cpu_pmu != NULL)
+ max_events = cpu_pmu->num_events;
return max_events;
}
@@ -130,7 +85,11 @@
#define CACHE_OP_UNSUPPORTED 0xFFFF
static int
-armpmu_map_cache_event(u64 config)
+armpmu_map_cache_event(const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u64 config)
{
unsigned int cache_type, cache_op, cache_result, ret;
@@ -146,7 +105,7 @@
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
- ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
+ ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
@@ -155,23 +114,46 @@
}
static int
-armpmu_map_event(u64 config)
+armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
- int mapping = (*armpmu->event_map)[config];
- return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+ int mapping = (*event_map)[config];
+ return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}
static int
-armpmu_map_raw_event(u64 config)
+armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
- return (int)(config & armpmu->raw_event_mask);
+ return (int)(config & raw_event_mask);
}
-static int
+static int map_cpu_event(struct perf_event *event,
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+ const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u32 raw_event_mask)
+{
+ u64 config = event->attr.config;
+
+ switch (event->attr.type) {
+ case PERF_TYPE_HARDWARE:
+ return armpmu_map_event(event_map, config);
+ case PERF_TYPE_HW_CACHE:
+ return armpmu_map_cache_event(cache_map, config);
+ case PERF_TYPE_RAW:
+ return armpmu_map_raw_event(raw_event_mask, config);
+ }
+
+ return -ENOENT;
+}
+
+int
armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int ret = 0;
@@ -202,11 +184,12 @@
return ret;
}
-static u64
+u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
again:
@@ -246,11 +229,9 @@
static void
armpmu_stop(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to update the counter, so ignore
* PERF_EF_UPDATE, see comments in armpmu_start().
@@ -266,11 +247,9 @@
static void
armpmu_start(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to reprogram the period, so ignore
* PERF_EF_RELOAD, see the comment below.
@@ -293,16 +272,16 @@
static void
armpmu_del(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
WARN_ON(idx < 0);
- clear_bit(idx, cpuc->active_mask);
armpmu_stop(event, PERF_EF_UPDATE);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
+ hw_events->events[idx] = NULL;
+ clear_bit(idx, hw_events->used_mask);
perf_event_update_userpage(event);
}
@@ -310,7 +289,8 @@
static int
armpmu_add(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
@@ -318,7 +298,7 @@
perf_pmu_disable(event->pmu);
/* If we don't have a space for the counter then finish early. */
- idx = armpmu->get_event_idx(cpuc, hwc);
+ idx = armpmu->get_event_idx(hw_events, hwc);
if (idx < 0) {
err = idx;
goto out;
@@ -330,8 +310,7 @@
*/
event->hw.idx = idx;
armpmu->disable(hwc, idx);
- cpuc->events[idx] = event;
- set_bit(idx, cpuc->active_mask);
+ hw_events->events[idx] = event;
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
@@ -345,25 +324,25 @@
return err;
}
-static struct pmu pmu;
-
static int
-validate_event(struct cpu_hw_events *cpuc,
+validate_event(struct pmu_hw_events *hw_events,
struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event fake_event = event->hw;
+ struct pmu *leader_pmu = event->group_leader->pmu;
- if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+ if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
- return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+ return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
}
static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
- struct cpu_hw_events fake_pmu;
+ struct pmu_hw_events fake_pmu;
memset(&fake_pmu, 0, sizeof(fake_pmu));
@@ -383,110 +362,119 @@
static irqreturn_t armpmu_platform_irq(int irq, void *dev)
{
- struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
+ struct arm_pmu *armpmu = (struct arm_pmu *) dev;
+ struct platform_device *plat_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
return plat->handle_irq(irq, dev, armpmu->handle_irq);
}
+static void
+armpmu_release_hardware(struct arm_pmu *armpmu)
+{
+ int i, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
+
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+ for (i = 0; i < irqs; ++i) {
+ if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
+ continue;
+ irq = platform_get_irq(pmu_device, i);
+ if (irq >= 0)
+ free_irq(irq, armpmu);
+ }
+
+ release_pmu(armpmu->type);
+}
+
static int
-armpmu_reserve_hardware(void)
+armpmu_reserve_hardware(struct arm_pmu *armpmu)
{
struct arm_pmu_platdata *plat;
irq_handler_t handle_irq;
- int i, err = -ENODEV, irq;
+ int i, err, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
- pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
- if (IS_ERR(pmu_device)) {
+ err = reserve_pmu(armpmu->type);
+ if (err) {
pr_warning("unable to reserve pmu\n");
- return PTR_ERR(pmu_device);
+ return err;
}
- init_pmu(ARM_PMU_DEVICE_CPU);
-
plat = dev_get_platdata(&pmu_device->dev);
if (plat && plat->handle_irq)
handle_irq = armpmu_platform_irq;
else
handle_irq = armpmu->handle_irq;
- if (pmu_device->num_resources < 1) {
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+ if (irqs < 1) {
pr_err("no irqs for PMUs defined\n");
return -ENODEV;
}
- for (i = 0; i < pmu_device->num_resources; ++i) {
+ for (i = 0; i < irqs; ++i) {
+ err = 0;
irq = platform_get_irq(pmu_device, i);
if (irq < 0)
continue;
+ /*
+ * If we have a single PMU interrupt that we can't shift,
+ * assume that we're running on a uniprocessor machine and
+ * continue. Otherwise, continue without this interrupt.
+ */
+ if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, i);
+ continue;
+ }
+
err = request_irq(irq, handle_irq,
IRQF_DISABLED | IRQF_NOBALANCING,
- "armpmu", NULL);
+ "arm-pmu", armpmu);
if (err) {
- pr_warning("unable to request IRQ%d for ARM perf "
- "counters\n", irq);
- break;
+ pr_err("unable to request IRQ%d for ARM PMU counters\n",
+ irq);
+ armpmu_release_hardware(armpmu);
+ return err;
}
+
+ cpumask_set_cpu(i, &armpmu->active_irqs);
}
- if (err) {
- for (i = i - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
- }
-
- return err;
+ return 0;
}
static void
-armpmu_release_hardware(void)
-{
- int i, irq;
-
- for (i = pmu_device->num_resources - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- armpmu->stop();
-
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-
-static void
hw_perf_event_destroy(struct perf_event *event)
{
- if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
- armpmu_release_hardware();
- mutex_unlock(&pmu_reserve_mutex);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ atomic_t *active_events = &armpmu->active_events;
+ struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
+
+ if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
+ armpmu_release_hardware(armpmu);
+ mutex_unlock(pmu_reserve_mutex);
}
}
static int
+event_requires_mode_exclusion(struct perf_event_attr *attr)
+{
+ return attr->exclude_idle || attr->exclude_user ||
+ attr->exclude_kernel || attr->exclude_hv;
+}
+
+static int
__hw_perf_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int mapping, err;
- /* Decode the generic type into an ARM event identifier. */
- if (PERF_TYPE_HARDWARE == event->attr.type) {
- mapping = armpmu_map_event(event->attr.config);
- } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
- mapping = armpmu_map_cache_event(event->attr.config);
- } else if (PERF_TYPE_RAW == event->attr.type) {
- mapping = armpmu_map_raw_event(event->attr.config);
- } else {
- pr_debug("event type %x not supported\n", event->attr.type);
- return -EOPNOTSUPP;
- }
+ mapping = armpmu->map_event(event);
if (mapping < 0) {
pr_debug("event %x:%llx not supported\n", event->attr.type,
@@ -495,34 +483,31 @@
}
/*
- * Check whether we need to exclude the counter from certain modes.
- * The ARM performance counters are on all of the time so if someone
- * has asked us for some excludes then we have to fail.
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet. For SMP systems, each core has it's own PMU so we can't do any
+ * clever allocation or constraints checking at this point.
*/
- if (event->attr.exclude_kernel || event->attr.exclude_user ||
- event->attr.exclude_hv || event->attr.exclude_idle) {
+ hwc->idx = -1;
+ hwc->config_base = 0;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ /*
+ * Check whether we need to exclude the counter from certain modes.
+ */
+ if ((!armpmu->set_event_filter ||
+ armpmu->set_event_filter(hwc, &event->attr)) &&
+ event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
return -EPERM;
}
/*
- * We don't assign an index until we actually place the event onto
- * hardware. Use -1 to signify that we haven't decided where to put it
- * yet. For SMP systems, each core has it's own PMU so we can't do any
- * clever allocation or constraints checking at this point.
+ * Store the event encoding into the config_base field.
*/
- hwc->idx = -1;
-
- /*
- * Store the event encoding into the config_base field. config and
- * event_base are unused as the only 2 things we need to know are
- * the event mapping and the counter to use. The counter to use is
- * also the indx and the config_base is the event type.
- */
- hwc->config_base = (unsigned long)mapping;
- hwc->config = 0;
- hwc->event_base = 0;
+ hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
@@ -542,32 +527,23 @@
static int armpmu_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
int err = 0;
+ atomic_t *active_events = &armpmu->active_events;
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HARDWARE:
- case PERF_TYPE_HW_CACHE:
- break;
-
- default:
+ if (armpmu->map_event(event) == -ENOENT)
return -ENOENT;
- }
-
- if (!armpmu)
- return -ENODEV;
event->destroy = hw_perf_event_destroy;
- if (!atomic_inc_not_zero(&active_events)) {
- mutex_lock(&pmu_reserve_mutex);
- if (atomic_read(&active_events) == 0) {
- err = armpmu_reserve_hardware();
- }
+ if (!atomic_inc_not_zero(active_events)) {
+ mutex_lock(&armpmu->reserve_mutex);
+ if (atomic_read(active_events) == 0)
+ err = armpmu_reserve_hardware(armpmu);
if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmu_reserve_mutex);
+ atomic_inc(active_events);
+ mutex_unlock(&armpmu->reserve_mutex);
}
if (err)
@@ -582,22 +558,9 @@
static void armpmu_enable(struct pmu *pmu)
{
- /* Enable all of the perf events on hardware. */
- int idx, enabled = 0;
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
- if (!armpmu)
- return;
-
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
-
- if (!event)
- continue;
-
- armpmu->enable(&event->hw, idx);
- enabled = 1;
- }
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
if (enabled)
armpmu->start();
@@ -605,20 +568,32 @@
static void armpmu_disable(struct pmu *pmu)
{
- if (armpmu)
- armpmu->stop();
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ armpmu->stop();
}
-static struct pmu pmu = {
- .pmu_enable = armpmu_enable,
- .pmu_disable = armpmu_disable,
- .event_init = armpmu_event_init,
- .add = armpmu_add,
- .del = armpmu_del,
- .start = armpmu_start,
- .stop = armpmu_stop,
- .read = armpmu_read,
-};
+static void __init armpmu_init(struct arm_pmu *armpmu)
+{
+ atomic_set(&armpmu->active_events, 0);
+ mutex_init(&armpmu->reserve_mutex);
+
+ armpmu->pmu = (struct pmu) {
+ .pmu_enable = armpmu_enable,
+ .pmu_disable = armpmu_disable,
+ .event_init = armpmu_event_init,
+ .add = armpmu_add,
+ .del = armpmu_del,
+ .start = armpmu_start,
+ .stop = armpmu_stop,
+ .read = armpmu_read,
+ };
+}
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+{
+ armpmu_init(armpmu);
+ return perf_pmu_register(&armpmu->pmu, name, type);
+}
/* Include the PMU-specific implementations. */
#include "perf_event_xscale.c"
@@ -630,14 +605,72 @@
* This requires SMP to be available, so exists as a separate initcall.
*/
static int __init
-armpmu_reset(void)
+cpu_pmu_reset(void)
{
- if (armpmu && armpmu->reset)
- return on_each_cpu(armpmu->reset, NULL, 1);
+ if (cpu_pmu && cpu_pmu->reset)
+ return on_each_cpu(cpu_pmu->reset, NULL, 1);
return 0;
}
-arch_initcall(armpmu_reset);
+arch_initcall(cpu_pmu_reset);
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id armpmu_of_device_ids[] = {
+ {.compatible = "arm,cortex-a9-pmu"},
+ {.compatible = "arm,cortex-a8-pmu"},
+ {.compatible = "arm,arm1136-pmu"},
+ {.compatible = "arm,arm1176-pmu"},
+ {},
+};
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+ {.name = "arm-pmu"},
+ {},
+};
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+ cpu_pmu->plat_device = pdev;
+ return 0;
+}
+
+static struct platform_driver armpmu_driver = {
+ .driver = {
+ .name = "arm-pmu",
+ .of_match_table = armpmu_of_device_ids,
+ },
+ .probe = armpmu_device_probe,
+ .id_table = armpmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+ return platform_driver_register(&armpmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+static struct pmu_hw_events *armpmu_get_cpu_events(void)
+{
+ return &__get_cpu_var(cpu_hw_events);
+}
+
+static void __init cpu_pmu_init(struct arm_pmu *armpmu)
+{
+ int cpu;
+ for_each_possible_cpu(cpu) {
+ struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+ events->events = per_cpu(hw_events, cpu);
+ events->used_mask = per_cpu(used_mask, cpu);
+ raw_spin_lock_init(&events->pmu_lock);
+ }
+ armpmu->get_hw_events = armpmu_get_cpu_events;
+ armpmu->type = ARM_PMU_DEVICE_CPU;
+}
+
+/*
+ * CPU PMU identification and registration.
+ */
static int __init
init_hw_perf_events(void)
{
@@ -651,22 +684,22 @@
case 0xB360: /* ARM1136 */
case 0xB560: /* ARM1156 */
case 0xB760: /* ARM1176 */
- armpmu = armv6pmu_init();
+ cpu_pmu = armv6pmu_init();
break;
case 0xB020: /* ARM11mpcore */
- armpmu = armv6mpcore_pmu_init();
+ cpu_pmu = armv6mpcore_pmu_init();
break;
case 0xC080: /* Cortex-A8 */
- armpmu = armv7_a8_pmu_init();
+ cpu_pmu = armv7_a8_pmu_init();
break;
case 0xC090: /* Cortex-A9 */
- armpmu = armv7_a9_pmu_init();
+ cpu_pmu = armv7_a9_pmu_init();
break;
case 0xC050: /* Cortex-A5 */
- armpmu = armv7_a5_pmu_init();
+ cpu_pmu = armv7_a5_pmu_init();
break;
case 0xC0F0: /* Cortex-A15 */
- armpmu = armv7_a15_pmu_init();
+ cpu_pmu = armv7_a15_pmu_init();
break;
}
/* Intel CPUs [xscale]. */
@@ -674,23 +707,23 @@
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
case 1:
- armpmu = xscale1pmu_init();
+ cpu_pmu = xscale1pmu_init();
break;
case 2:
- armpmu = xscale2pmu_init();
+ cpu_pmu = xscale2pmu_init();
break;
}
}
- if (armpmu) {
+ if (cpu_pmu) {
pr_info("enabled with %s PMU driver, %d counters available\n",
- armpmu->name, armpmu->num_events);
+ cpu_pmu->name, cpu_pmu->num_events);
+ cpu_pmu_init(cpu_pmu);
+ armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
}
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-
return 0;
}
early_initcall(init_hw_perf_events);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index dd7f3b9..e63d811 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -54,7 +54,7 @@
};
enum armv6_counters {
- ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_CYCLE_COUNTER = 0,
ARMV6_COUNTER0,
ARMV6_COUNTER1,
};
@@ -433,6 +433,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = 0;
@@ -454,12 +455,29 @@
* Mask out the current event and set the counter to count the event
* that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int counter_is_active(unsigned long pmcr, int idx)
+{
+ unsigned long mask = 0;
+ if (idx == ARMV6_CYCLE_COUNTER)
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ else if (idx == ARMV6_COUNTER0)
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ else if (idx == ARMV6_COUNTER1)
+ mask = ARMV6_PMCR_COUNT1_IEN;
+
+ if (mask)
+ return pmcr & mask;
+
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return 0;
}
static irqreturn_t
@@ -468,7 +486,7 @@
{
unsigned long pmcr = armv6_pmcr_read();
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -487,11 +505,11 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
+ if (!counter_is_active(pmcr, idx))
continue;
/*
@@ -508,7 +526,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -527,28 +545,30 @@
armv6pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val |= ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
armv6pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
/* Always place a cycle counter into the cycle counter. */
@@ -578,6 +598,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -598,12 +619,12 @@
* of ETM bus signal assertion cycles. The external reporting should
* be disabled and so this should never increment.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
@@ -611,6 +632,7 @@
int idx)
{
unsigned long val, mask, flags, evt = 0;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -627,15 +649,21 @@
* Unlike UP ARMv6, we don't have a way of stopping the counters. We
* simply disable the interrupt reporting.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static const struct arm_pmu armv6pmu = {
+static int armv6_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6_perf_map,
+ &armv6_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6pmu = {
.id = ARM_PERF_PMU_ID_V6,
.name = "v6",
.handle_irq = armv6pmu_handle_irq,
@@ -646,14 +674,12 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6_perf_cache_map,
- .event_map = &armv6_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return &armv6pmu;
}
@@ -665,7 +691,14 @@
* disable the interrupt reporting and update the event. When unthrottling we
* reset the period and enable the interrupt reporting.
*/
-static const struct arm_pmu armv6mpcore_pmu = {
+
+static int armv6mpcore_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6mpcore_perf_map,
+ &armv6mpcore_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6mpcore_pmu = {
.id = ARM_PERF_PMU_ID_V6MP,
.name = "v6mpcore",
.handle_irq = armv6pmu_handle_irq,
@@ -676,24 +709,22 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6mpcore_perf_cache_map,
- .event_map = &armv6mpcore_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6mpcore_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return &armv6mpcore_pmu;
}
#else
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 4c85183..98b7573 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -17,6 +17,9 @@
*/
#ifdef CONFIG_CPU_V7
+
+static struct arm_pmu armv7pmu;
+
/*
* Common ARMv7 event types
*
@@ -676,25 +679,26 @@
};
/*
- * Perf Events counters
+ * Perf Events' indices
*/
-enum armv7_counters {
- ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
- ARMV7_COUNTER0 = 2, /* First event counter */
-};
+#define ARMV7_IDX_CYCLE_COUNTER 0
+#define ARMV7_IDX_COUNTER0 1
+#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+#define ARMV7_MAX_COUNTERS 32
+#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1)
/*
* ARMv7 low level PMNC access
*/
/*
+ * Perf Event to low level counters mapping
+ */
+#define ARMV7_IDX_TO_COUNTER(x) \
+ (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
+
+/*
* Per-CPU PMNC: config reg
*/
#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
@@ -708,103 +712,76 @@
#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
/*
- * Available counters
- */
-#define ARMV7_CNT0 0 /* First event counter */
-#define ARMV7_CCNT 31 /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
-
-/*
* FLAG: counters overflow flag status reg
*/
-#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
-static inline unsigned long armv7_pmnc_read(void)
+/*
+ * PMXEVTYPER: Event selection reg
+ */
+#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */
+#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */
+
+/*
+ * Event filters for PMUv2
+ */
+#define ARMV7_EXCLUDE_PL1 (1 << 31)
+#define ARMV7_EXCLUDE_USER (1 << 30)
+#define ARMV7_INCLUDE_HYP (1 << 27)
+
+static inline u32 armv7_pmnc_read(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
return val;
}
-static inline void armv7_pmnc_write(unsigned long val)
+static inline void armv7_pmnc_write(u32 val)
{
val &= ARMV7_PMNC_MASK;
isb();
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
}
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+static inline int armv7_pmnc_has_overflowed(u32 pmnc)
{
return pmnc & ARMV7_OVERFLOWED_MASK;
}
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum armv7_counters counter)
+static inline int armv7_pmnc_counter_valid(int idx)
+{
+ return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
{
int ret = 0;
+ u32 counter;
- if (counter == ARMV7_CYCLE_COUNTER)
- ret = pmnc & ARMV7_FLAG_C;
- else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
- ret = pmnc & ARMV7_FLAG_P(counter);
- else
+ if (!armv7_pmnc_counter_valid(idx)) {
pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), counter);
+ smp_processor_id(), idx);
+ } else {
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ ret = pmnc & BIT(counter);
+ }
return ret;
}
-static inline int armv7_pmnc_select_counter(unsigned int idx)
+static inline int armv7_pmnc_select_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
- pr_err("CPU%u selecting wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u selecting wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
isb();
return idx;
@@ -812,124 +789,95 @@
static inline u32 armv7pmu_read_counter(int idx)
{
- unsigned long value = 0;
+ u32 value = 0;
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mrc p15, 0, %0, c9, c13, 2"
- : "=r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
return value;
}
static inline void armv7pmu_write_counter(int idx, u32 value)
{
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mcr p15, 0, %0, c9, c13, 2"
- : : "r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
}
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
{
if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTSEL_MASK;
+ val &= ARMV7_EVTYPE_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+static inline int armv7_pmnc_enable_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENS_C;
- else
- val = ARMV7_CNTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+static inline int armv7_pmnc_disable_counter(int idx)
{
- u32 val;
+ u32 counter;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENC_C;
- else
- val = ARMV7_CNTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+static inline int armv7_pmnc_enable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENS_C;
- else
- val = ARMV7_INTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+static inline int armv7_pmnc_disable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENC_C;
- else
- val = ARMV7_INTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
return idx;
}
@@ -973,14 +921,14 @@
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
- for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
}
}
#endif
@@ -988,12 +936,13 @@
static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Enable counter and interrupt, and set the counter to count
* the event that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1002,9 +951,10 @@
/*
* Set event (if destined for PMNx counters)
- * We don't need to set the event if it's a cycle count
+ * We only need to set the event for the cycle counter if we
+ * have the ability to perform event filtering.
*/
- if (idx != ARMV7_CYCLE_COUNTER)
+ if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
armv7_pmnc_write_evtsel(idx, hwc->config_base);
/*
@@ -1017,17 +967,18 @@
*/
armv7_pmnc_enable_counter(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Disable counter and interrupt
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1039,14 +990,14 @@
*/
armv7_pmnc_disable_intens(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
{
- unsigned long pmnc;
+ u32 pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -1069,13 +1020,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@@ -1090,7 +1038,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -1108,61 +1056,114 @@
static void armv7pmu_start(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all counters */
armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_stop(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all counters */
armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx;
+ unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
- if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
- if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
- return ARMV7_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * the events counters
- */
- for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
- if (!test_and_set_bit(idx, cpuc->used_mask))
- return idx;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
+ return ARMV7_IDX_CYCLE_COUNTER;
}
+
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+}
+
+/*
+ * Add an event filter to a given event. This will only work for PMUv2 PMUs.
+ */
+static int armv7pmu_set_event_filter(struct hw_perf_event *event,
+ struct perf_event_attr *attr)
+{
+ unsigned long config_base = 0;
+
+ if (attr->exclude_idle)
+ return -EPERM;
+ if (attr->exclude_user)
+ config_base |= ARMV7_EXCLUDE_USER;
+ if (attr->exclude_kernel)
+ config_base |= ARMV7_EXCLUDE_PL1;
+ if (!attr->exclude_hv)
+ config_base |= ARMV7_INCLUDE_HYP;
+
+ /*
+ * Install the filter into config_base as this is used to
+ * construct the event type.
+ */
+ event->config_base = config_base;
+
+ return 0;
}
static void armv7pmu_reset(void *info)
{
- u32 idx, nb_cnt = armpmu->num_events;
+ u32 idx, nb_cnt = cpu_pmu->num_events;
/* The counter and interrupt enable registers are unknown at reset. */
- for (idx = 1; idx < nb_cnt; ++idx)
+ for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
armv7pmu_disable_event(NULL, idx);
/* Initialize & Reset PMNC: C and P bits */
armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
}
+static int armv7_a8_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a8_perf_map,
+ &armv7_a8_perf_cache_map, 0xFF);
+}
+
+static int armv7_a9_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a9_perf_map,
+ &armv7_a9_perf_cache_map, 0xFF);
+}
+
+static int armv7_a5_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a5_perf_map,
+ &armv7_a5_perf_cache_map, 0xFF);
+}
+
+static int armv7_a15_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a15_perf_map,
+ &armv7_a15_perf_cache_map, 0xFF);
+}
+
static struct arm_pmu armv7pmu = {
.handle_irq = armv7pmu_handle_irq,
.enable = armv7pmu_enable_event,
@@ -1173,7 +1174,6 @@
.start = armv7pmu_start,
.stop = armv7pmu_stop,
.reset = armv7pmu_reset,
- .raw_event_mask = 0xFF,
.max_period = (1LLU << 32) - 1,
};
@@ -1188,62 +1188,59 @@
return nb_cnt + 1;
}
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
- armv7pmu.cache_map = &armv7_a8_perf_cache_map;
- armv7pmu.event_map = &armv7_a8_perf_map;
+ armv7pmu.map_event = armv7_a8_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
- armv7pmu.cache_map = &armv7_a9_perf_cache_map;
- armv7pmu.event_map = &armv7_a9_perf_map;
+ armv7pmu.map_event = armv7_a9_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
- armv7pmu.cache_map = &armv7_a5_perf_cache_map;
- armv7pmu.event_map = &armv7_a5_perf_map;
+ armv7pmu.map_event = armv7_a5_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
- armv7pmu.cache_map = &armv7_a15_perf_cache_map;
- armv7pmu.event_map = &armv7_a15_perf_map;
+ armv7pmu.map_event = armv7_a15_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
+ armv7pmu.set_event_filter = armv7pmu_set_event_filter;
return &armv7pmu;
}
#else
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3c43974..e0cca10 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -40,7 +40,7 @@
};
enum xscale_counters {
- XSCALE_CYCLE_COUNTER = 1,
+ XSCALE_CYCLE_COUNTER = 0,
XSCALE_COUNTER0,
XSCALE_COUNTER1,
XSCALE_COUNTER2,
@@ -222,7 +222,7 @@
{
unsigned long pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -249,13 +249,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -266,7 +263,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -284,6 +281,7 @@
xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -305,18 +303,19 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -336,16 +335,16 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
if (XSCALE_PERFCTR_CCNT == event->config_base) {
@@ -368,24 +367,26 @@
xscale1pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val |= XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -424,7 +425,13 @@
}
}
-static const struct arm_pmu xscale1pmu = {
+static int xscale_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &xscale_perf_map,
+ &xscale_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu xscale1pmu = {
.id = ARM_PERF_PMU_ID_XSCALE1,
.name = "xscale1",
.handle_irq = xscale1pmu_handle_irq,
@@ -435,14 +442,12 @@
.get_event_idx = xscale1pmu_get_event_idx,
.start = xscale1pmu_start,
.stop = xscale1pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return &xscale1pmu;
}
@@ -560,7 +565,7 @@
{
unsigned long pmnc, of_flags;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -581,13 +586,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -598,7 +600,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -616,6 +618,7 @@
xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -649,16 +652,17 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -692,14 +696,14 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx = xscale1pmu_get_event_idx(cpuc, event);
@@ -718,24 +722,26 @@
xscale2pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
val |= XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -786,7 +792,7 @@
}
}
-static const struct arm_pmu xscale2pmu = {
+static struct arm_pmu xscale2pmu = {
.id = ARM_PERF_PMU_ID_XSCALE2,
.name = "xscale2",
.handle_irq = xscale2pmu_handle_irq,
@@ -797,24 +803,22 @@
.get_event_idx = xscale2pmu_get_event_idx,
.start = xscale2pmu_start,
.stop = xscale2pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 5,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return &xscale2pmu;
}
#else
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index c53474f..2c3407e 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -10,192 +10,26 @@
*
*/
-#define pr_fmt(fmt) "PMU: " fmt
-
-#include <linux/cpumask.h>
#include <linux/err.h>
-#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
#include <asm/pmu.h>
-static volatile long pmu_lock;
+/*
+ * PMU locking to ensure mutual exclusion between different subsystems.
+ */
+static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
-
-static int __devinit pmu_register(struct platform_device *pdev,
- enum arm_pmu_type type)
-{
- if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
- pr_warning("received registration request for unknown "
- "PMU device type %d\n", type);
- return -EINVAL;
- }
-
- if (pmu_devices[type]) {
- pr_warning("rejecting duplicate registration of PMU device "
- "type %d.", type);
- return -ENOSPC;
- }
-
- pr_info("registered new PMU device of type %d\n", type);
- pmu_devices[type] = pdev;
- return 0;
-}
-
-#define OF_MATCH_PMU(_name, _type) { \
- .compatible = _name, \
- .data = (void *)_type, \
-}
-
-#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
-
-static struct of_device_id armpmu_of_device_ids[] = {
- OF_MATCH_CPU("arm,cortex-a9-pmu"),
- OF_MATCH_CPU("arm,cortex-a8-pmu"),
- OF_MATCH_CPU("arm,arm1136-pmu"),
- OF_MATCH_CPU("arm,arm1176-pmu"),
- {},
-};
-
-#define PLAT_MATCH_PMU(_name, _type) { \
- .name = _name, \
- .driver_data = _type, \
-}
-
-#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
- PLAT_MATCH_CPU("arm-pmu"),
- {},
-};
-
-enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
-{
- const struct of_device_id *of_id;
- const struct platform_device_id *pdev_id;
-
- /* provided by of_device_id table */
- if (pdev->dev.of_node) {
- of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
- BUG_ON(!of_id);
- return (enum arm_pmu_type)of_id->data;
- }
-
- /* Provided by platform_device_id table */
- pdev_id = platform_get_device_id(pdev);
- BUG_ON(!pdev_id);
- return pdev_id->driver_data;
-}
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
- return pmu_register(pdev, armpmu_device_type(pdev));
-}
-
-static struct platform_driver armpmu_driver = {
- .driver = {
- .name = "arm-pmu",
- .of_match_table = armpmu_of_device_ids,
- },
- .probe = armpmu_device_probe,
- .id_table = armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
- return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-struct platform_device *
+int
reserve_pmu(enum arm_pmu_type type)
{
- struct platform_device *pdev;
-
- if (test_and_set_bit_lock(type, &pmu_lock)) {
- pdev = ERR_PTR(-EBUSY);
- } else if (pmu_devices[type] == NULL) {
- clear_bit_unlock(type, &pmu_lock);
- pdev = ERR_PTR(-ENODEV);
- } else {
- pdev = pmu_devices[type];
- }
-
- return pdev;
+ return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
}
EXPORT_SYMBOL_GPL(reserve_pmu);
-int
+void
release_pmu(enum arm_pmu_type type)
{
- if (WARN_ON(!pmu_devices[type]))
- return -EINVAL;
- clear_bit_unlock(type, &pmu_lock);
- return 0;
+ clear_bit_unlock(type, pmu_lock);
}
-EXPORT_SYMBOL_GPL(release_pmu);
-
-static int
-set_irq_affinity(int irq,
- unsigned int cpu)
-{
-#ifdef CONFIG_SMP
- int err = irq_set_affinity(irq, cpumask_of(cpu));
- if (err)
- pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, cpu);
- return err;
-#else
- return -EINVAL;
-#endif
-}
-
-static int
-init_cpu_pmu(void)
-{
- int i, irqs, err = 0;
- struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
-
- if (!pdev)
- return -ENODEV;
-
- irqs = pdev->num_resources;
-
- /*
- * If we have a single PMU interrupt that we can't shift, assume that
- * we're running on a uniprocessor machine and continue.
- */
- if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
- return 0;
-
- for (i = 0; i < irqs; ++i) {
- err = set_irq_affinity(platform_get_irq(pdev, i), i);
- if (err)
- break;
- }
-
- return err;
-}
-
-int
-init_pmu(enum arm_pmu_type type)
-{
- int err = 0;
-
- switch (type) {
- case ARM_PMU_DEVICE_CPU:
- err = init_cpu_pmu();
- break;
- default:
- pr_warning("attempt to initialise PMU of unknown "
- "type %d\n", type);
- err = -EINVAL;
- }
-
- return err;
-}
-EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index e514c76..6136144 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -820,25 +820,8 @@
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
- else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
- /*
- * We still are executing with a minimal MMU mapping created
- * with the presumption that the machine default for this
- * is located in the first MB of RAM. Anything else will
- * fault and silently hang the kernel at this point.
- */
- if (mdesc->boot_params < PHYS_OFFSET ||
- mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
- printk(KERN_WARNING
- "Default boot params at physical 0x%08lx out of reach\n",
- mdesc->boot_params);
- } else
-#endif
- {
- tags = phys_to_virt(mdesc->boot_params);
- }
- }
+ else if (mdesc->atag_offset)
+ tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index dc902f2..020e99c 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -8,92 +8,61 @@
.text
/*
- * Save CPU state for a suspend
- * r1 = v:p offset
- * r2 = suspend function arg0
- * r3 = suspend function
+ * Save CPU state for a suspend. This saves the CPU general purpose
+ * registers, and allocates space on the kernel stack to save the CPU
+ * specific registers and some other data for resume.
+ * r0 = suspend function arg0
+ * r1 = suspend function
*/
ENTRY(__cpu_suspend)
stmfd sp!, {r4 - r11, lr}
#ifdef MULTI_CPU
ldr r10, =processor
- ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
- ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
#else
- ldr r5, =cpu_suspend_size
- ldr ip, =cpu_do_resume
+ ldr r4, =cpu_suspend_size
#endif
- mov r6, sp @ current virtual SP
- sub sp, sp, r5 @ allocate CPU state on stack
- mov r0, sp @ save pointer to CPU save block
- add ip, ip, r1 @ convert resume fn to phys
- stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn
- ldr r5, =sleep_save_sp
- add r6, sp, r1 @ convert SP to phys
- stmfd sp!, {r2, r3} @ save suspend func arg and pointer
+ mov r5, sp @ current virtual SP
+ add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn
+ sub sp, sp, r4 @ allocate CPU state on stack
+ stmfd sp!, {r0, r1} @ save suspend func arg and pointer
+ add r0, sp, #8 @ save pointer to save block
+ mov r1, r4 @ size of save block
+ mov r2, r5 @ virtual SP
+ ldr r3, =sleep_save_sp
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
ALT_UP(mov lr, #0)
and lr, lr, #15
- str r6, [r5, lr, lsl #2] @ save phys SP
-#else
- str r6, [r5] @ save phys SP
+ add r3, r3, lr, lsl #2
#endif
-#ifdef MULTI_CPU
- mov lr, pc
- ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
-#else
- bl cpu_do_suspend
-#endif
-
- @ flush data cache
-#ifdef MULTI_CACHE
- ldr r10, =cpu_cache
- mov lr, pc
- ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
-#else
- bl __cpuc_flush_kern_all
-#endif
+ bl __cpu_suspend_save
adr lr, BSYM(cpu_suspend_abort)
ldmfd sp!, {r0, pc} @ call suspend fn
ENDPROC(__cpu_suspend)
.ltorg
cpu_suspend_abort:
- ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn
+ ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn
+ teq r0, #0
+ moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_suspend_abort)
/*
* r0 = control register value
- * r1 = v:p offset (preserved by cpu_do_resume)
- * r2 = phys page table base
- * r3 = L1 section flags
*/
-ENTRY(cpu_resume_mmu)
- adr r4, cpu_resume_turn_mmu_on
- mov r4, r4, lsr #20
- orr r3, r3, r4, lsl #20
- ldr r5, [r2, r4, lsl #2] @ save old mapping
- str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
- sub r2, r2, r1
- ldr r3, =cpu_resume_after_mmu
- bic r1, r0, #CR_C @ ensure D-cache is disabled
- b cpu_resume_turn_mmu_on
-ENDPROC(cpu_resume_mmu)
- .ltorg
.align 5
-cpu_resume_turn_mmu_on:
- mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
- mrc p15, 0, r1, c0, c0, 0 @ read id reg
- mov r1, r1
- mov r1, r1
+ENTRY(cpu_resume_mmu)
+ ldr r3, =cpu_resume_after_mmu
+ mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ mov r0, r0
+ mov r0, r0
mov pc, r3 @ jump to virtual address
-ENDPROC(cpu_resume_turn_mmu_on)
+ENDPROC(cpu_resume_mmu)
cpu_resume_after_mmu:
- str r5, [r2, r4, lsl #2] @ restore old mapping
- mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
bl cpu_init @ restore the und/abt/irq banked regs
mov r0, #0 @ return zero on success
ldmfd sp!, {r4 - r11, pc}
@@ -119,7 +88,7 @@
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
- @ load v:p, stack, resume fn
+ @ load phys pgd, stack, resume fn
ARM( ldmia r0!, {r1, sp, pc} )
THUMB( ldmia r0!, {r1, r2, r3} )
THUMB( mov sp, r2 )
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
new file mode 100644
index 0000000..93a22d2
--- /dev/null
+++ b/arch/arm/kernel/suspend.c
@@ -0,0 +1,72 @@
+#include <linux/init.h>
+
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+
+static pgd_t *suspend_pgd;
+
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern void cpu_resume_mmu(void);
+
+/*
+ * This is called by __cpu_suspend() to save the state, and do whatever
+ * flushing is required to ensure that when the CPU goes to sleep we have
+ * the necessary data available when the caches are not searched.
+ */
+void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
+{
+ *save_ptr = virt_to_phys(ptr);
+
+ /* This must correspond to the LDM in cpu_resume() assembly */
+ *ptr++ = virt_to_phys(suspend_pgd);
+ *ptr++ = sp;
+ *ptr++ = virt_to_phys(cpu_do_resume);
+
+ cpu_do_suspend(ptr);
+
+ flush_cache_all();
+ outer_clean_range(*save_ptr, *save_ptr + ptrsz);
+ outer_clean_range(virt_to_phys(save_ptr),
+ virt_to_phys(save_ptr) + sizeof(*save_ptr));
+}
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+ struct mm_struct *mm = current->active_mm;
+ int ret;
+
+ if (!suspend_pgd)
+ return -EINVAL;
+
+ /*
+ * Provide a temporary page table with an identity mapping for
+ * the MMU-enable code, required for resuming. On successful
+ * resume (indicated by a zero return code), we need to switch
+ * back to the correct page tables.
+ */
+ ret = __cpu_suspend(arg, fn);
+ if (ret == 0) {
+ cpu_switch_mm(mm->pgd, mm);
+ local_flush_tlb_all();
+ }
+
+ return ret;
+}
+
+static int __init cpu_suspend_init(void)
+{
+ suspend_pgd = pgd_alloc(&init_mm);
+ if (suspend_pgd) {
+ unsigned long addr = virt_to_phys(cpu_resume_mmu);
+ identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
+ }
+ return suspend_pgd ? 0 : -ENOMEM;
+}
+core_initcall(cpu_suspend_init);
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index e04c5fb..1532b50 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -319,6 +320,7 @@
static void __init at91sam9g45_map_io(void)
{
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
+ init_consistent_dma_size(SZ_4M);
}
static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c611b9..406bb64 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -128,8 +128,6 @@
#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
/*
* DMA peripheral identifiers
* for hardware handshaking interface
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
index 15162e4..8848a5b 100644
--- a/arch/arm/mach-bcmring/include/mach/memory.h
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -25,9 +25,4 @@
#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
-/*
- * Maximum DMA memory allowed is 14M
- */
-#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
-
#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 0f1c37e..8616876 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -13,6 +13,7 @@
*****************************************************************************/
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -53,4 +54,6 @@
{
iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+ /* Maximum DMA memory allowed is 14M */
+ init_consistent_dma_size(14 << 20);
}
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c..0276091 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@
MACHINE_START(AUTCPU12, "autronix autcpu12")
/* Maintainer: Thomas Gleixner */
- .boot_params = 0xc0020000,
+ .atag_offset = 0x20000,
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d..25b3bfd 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@
MACHINE_START(CDB89712, "Cirrus-CDB89712")
/* Maintainer: Ray Lehtiniemi */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf..1df9ec6 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@
MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
/* Maintainer: Rob Scott */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 67b5abb4..06c8abd 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,7 +37,7 @@
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
/* Maintainer: Nobody */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x0100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 98ca5b2..abf522d 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -57,7 +57,7 @@
MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
/* Maintainer: Jon McClintock */
- .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */
+ .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */
.fixup = fixup_edb7211,
.map_io = edb7211_map_io,
.reserve = edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index b1cb479..b6f7d86 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,7 +75,6 @@
MACHINE_START(FORTUNET, "ARM-FortuNet")
/* Maintainer: FortuNet Inc. */
- .boot_params = 0x00000000,
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..e7f75ae 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,7 +89,7 @@
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_p720t,
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 3e7d149..55f7b4b 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -197,7 +197,7 @@
}
MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd786..26d94c0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@
}
MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d514..6e41cb5 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1291,7 +1291,7 @@
}
MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd..6556628 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@
}
MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284c..b307470 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@
}
MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f21..04c43ab 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@
}
MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a1..a005e769 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a314..337c45e 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -792,7 +792,7 @@
}
MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
@@ -801,7 +801,7 @@
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226..6efc84cc 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -566,7 +566,7 @@
}
MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a800..38d6f64 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@
MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a..c6701e4 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@
}
MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c..5dd4da9 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@
MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 7828920..90ee7b5 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@
#endif
MACHINE_START(TNETV107X, "TNETV107X EVM")
- .boot_params = (TNETV107X_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d25573..865ffe5 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/etherdevice.h>
#include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
@@ -86,6 +87,8 @@
iotable_init(davinci_soc_info.io_desc,
davinci_soc_info.io_desc_num);
+ init_consistent_dma_size(14 << 20);
+
/*
* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2f7e719..68def71 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -136,6 +136,7 @@
.n_cc = 1,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
@@ -151,6 +152,7 @@
.n_cc = 1,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
},
{
.n_channel = 32,
@@ -160,6 +162,7 @@
.n_cc = 1,
.queue_tc_mapping = da850_queue_tc_mapping,
.queue_priority_mapping = da850_queue_priority_mapping,
+ .default_queue = EVENTQ_0,
},
};
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 6162cae..29b17f7 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -80,6 +80,7 @@
.n_cc = 1,
.queue_tc_mapping = edma_tc_mapping,
.queue_priority_mapping = edma_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9..68fb181 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -591,6 +591,7 @@
.n_cc = 1,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c27..555ff5b 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -514,6 +514,7 @@
.n_cc = 1,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e711..b0c350a 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -555,6 +555,7 @@
.n_cc = 1,
.queue_tc_mapping = dm646x_queue_tc_mapping,
.queue_priority_mapping = dm646x_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 6b96698..da90103 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -1435,12 +1435,11 @@
goto fail1;
}
- edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+ edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
if (!edma_cc[j]) {
status = -ENOMEM;
goto fail1;
}
- memset(edma_cc[j], 0, sizeof(struct edma));
edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
EDMA_MAX_DMACH);
@@ -1450,8 +1449,6 @@
EDMA_MAX_CC);
edma_cc[j]->default_queue = info[j]->default_queue;
- if (!edma_cc[j]->default_queue)
- edma_cc[j]->default_queue = EVENTQ_1;
dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
edmacc_regs_base[j]);
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 7873194..885d233 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -36,9 +36,4 @@
#define DDR2_MCLKSTOPEN_BIT BIT(30)
#define DDR2_LPMODEN_BIT BIT(31)
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9..c8a406f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@
}
MACHINE_START(CM_A510, "Compulab CM-A510 Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = cm_a510_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ec..11ea34e 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@
}
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 087bc77..d0ce8ab 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,7 +280,7 @@
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
- .boot_params = 0x00000400,
+ .atag_offset = 0x400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
.soft_reboot = 1,
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 9969bb1..257175e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -240,7 +240,7 @@
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -251,7 +251,7 @@
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -262,7 +262,7 @@
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -273,7 +273,7 @@
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -284,7 +284,7 @@
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -295,7 +295,7 @@
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -306,7 +306,7 @@
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -317,7 +317,7 @@
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@
#ifdef CONFIG_MACH_MICRO9H
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -88,7 +88,7 @@
#ifdef CONFIG_MACH_MICRO9M
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -99,7 +99,7 @@
#ifdef CONFIG_MACH_MICRO9L
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -110,7 +110,7 @@
#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 8392e95..238bc60 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -65,8 +65,8 @@
}
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ /* Maintainer: Ryan Mallon */
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 2e9c614..3bdf3a2 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab9..bee8f77 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -113,22 +113,7 @@
config MACH_SMDKC210
bool "SMDKC210"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_PD
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_SDHCI
+ select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7..e3e93ea 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -25,7 +25,7 @@
# machine support
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..f0ca6c1 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b..6e05368 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1152,7 +1152,7 @@
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index a7c65e0..0000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
- .win_mode = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
- .win[0] = &smdkc210_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(1),
- .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(5),
- .end = IRQ_EINT(5),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
- .resource = smdkc210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &s5p_device_fimd0,
- &smdkc210_lcd_lte480wv,
- &smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkc210_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
- samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
- s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
- platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkc210_map_io,
- .init_machine = smdkc210_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea41495..2c1a076 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
@@ -112,6 +117,67 @@
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+ .win[0] = &smdkv310_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@
&exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
+ &s5p_device_fimd0,
+ &smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
};
@@ -248,6 +316,7 @@
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+ s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -255,7 +324,16 @@
MACHINE_START(SMDKV310, "SMDKV310")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d89..2aac6f7 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -762,7 +762,7 @@
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 5b1a8db..a3da5d1 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,7 +86,7 @@
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.soft_reboot = 1,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..012210c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..d8c1c92 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,7 +648,7 @@
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.reserve_lp0 = 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91..f41dba3 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
/* Maintainer: Jamey Hicks / George France */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07..5927d3c 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af..cd7437a 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@
}
MACHINE_START(RUT100, "Teltonika RUT100")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422..a367880 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a22034..f382811 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd222_timer,
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 65f1bea..9886f19 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -29,7 +29,7 @@
MACHINE_START(H7201, "Hynix GMS30C7201")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0xc0001000,
+ .atag_offset = 0x1000,
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a..284a134 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@
MACHINE_START(H7202, "Hynix HMS30C7202")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0x40000100,
+ .atag_offset = 0x100,
.map_io = h720x_map_io,
.init_irq = h7202_init_irq,
.timer = &h7202_timer,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 83e5e3a..fa2b97d 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -554,7 +554,7 @@
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index f851fe9..b1ec2cf 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -311,7 +311,7 @@
};
MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index d698074..ea6c9c3 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@
MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 2442d5d..9163318 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -163,7 +163,7 @@
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6778f81..22306ce 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -275,7 +275,7 @@
};
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 272f793..8da48b3 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,7 @@
MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index d81a769..21a14a2 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,7 @@
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 05da82e..4e030ac 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -272,7 +272,7 @@
};
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index e8867ff..b4a5e03 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -140,7 +140,7 @@
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
@@ -149,7 +149,7 @@
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d389ecf..e56828d 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -305,7 +305,7 @@
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX21_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx21ads_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 7f66a91..dd25ee8 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -253,7 +253,7 @@
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 097ff42..bcf480b 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -421,7 +421,7 @@
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index fc26ed7..efe6109 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -345,7 +345,7 @@
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index c20be75..589066f 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -764,7 +764,7 @@
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 29ca890..910c456 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -535,7 +535,7 @@
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 126913a..e92eaf9 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -295,7 +295,7 @@
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4b47fd9..5242cb7 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -280,7 +280,7 @@
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b358383..1d01ef2 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -567,7 +567,7 @@
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index b3b9bd8..f2a873d 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -217,7 +217,7 @@
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c85876f..5ec3989 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,7 @@
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 71083aa..0f6bd11 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -435,7 +435,7 @@
};
MACHINE_START(PCA100, "phyCARD-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index f45b7cd..186d4eb 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -688,7 +688,7 @@
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = pcm037_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 5a38e09..a497a29 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -351,7 +351,7 @@
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 660ec3e..0a4d31d 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -418,7 +418,7 @@
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 05b74a7..c33ab00 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -265,7 +265,7 @@
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index db2d604..85d3284 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,7 @@
MACHINE_START(SCB9328, "Synertronixx scb9328")
/* Sascha Hauer */
- .boot_params = 0x08000100,
+ .atag_offset = 100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8cdc730..a20fb3f 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -459,7 +459,7 @@
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = ap_map_io,
.init_early = integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab..5de49c3 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = intcp_map_io,
.init_early = intcp_init_early,
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 23dfaff..4cf2cc4 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a..cd9e274 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 6cbffbf..4325055 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@
}
MACHINE_START(EM7210, "Lanner EM7210")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = em7210_map_io,
.init_irq = iop32x_init_irq,
.timer = &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ceef5d4..0edc880 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@
MACHINE_START(GLANTANK, "GLAN Tank")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = glantank_map_io,
.init_irq = iop32x_init_irq,
.timer = &glantank_timer,
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3a62514..9e7aacc 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
@@ -327,7 +327,7 @@
*/
MACHINE_START(EP80219, "Intel EP80219")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 35b7e69..53ea86f 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@
MACHINE_START(IQ80321, "Intel IQ80321")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq80321_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1a374ea..d726927 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@
MACHINE_START(N2100, "Thecus N2100")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = n2100_map_io,
.init_irq = iop32x_init_irq,
.timer = &n2100_timer,
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 637c027..9e14ccc 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80331, "Intel IQ80331")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 90a0436..09c899a 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80332, "Intel IQ80332")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 62c60ad..af99945 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -254,7 +254,7 @@
MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = enp2611_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5bad1a8..f7dfd97 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -171,7 +171,7 @@
MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 3d3cef8..d33bcac 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -286,7 +286,7 @@
MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index be2a254..61a2867 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -417,7 +417,7 @@
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -428,7 +428,7 @@
#ifdef CONFIG_ARCH_IXDP2801
MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -441,7 +441,7 @@
*/
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe..30dd316 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = espresso_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index ec028e3..b3a57e0 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@
.map_io = ixdp2351_map_io,
.init_irq = ixdp2351_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ixdp2351_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 844551d..8f4dcbb 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -175,6 +175,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = roadrunner_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index ee19c1d..37609a2 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -185,7 +185,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index e24564b..81dfec3 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -130,7 +130,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 03e5451..71607a7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -279,7 +279,7 @@
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 23a8b36..a9540cd 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -273,7 +273,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = fsg_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d4f851b..d69d1b0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gateway7001_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 7548d9a..bf6678d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gmlr_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3790dff..aa029fc 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gtwx5715_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6a29279..f235f82 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -270,7 +270,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -284,7 +284,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -298,7 +298,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index afb5187..9f46692 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -314,7 +314,7 @@
MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 69e40f2..3676fbf 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -300,7 +300,7 @@
MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 045336c..27e469e 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = vulcan_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 40b9fad..b14144b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = wg302v2_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@
}
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@
MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@
}
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -269,7 +269,7 @@
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -280,7 +280,7 @@
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -410,7 +410,7 @@
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@
#ifdef CONFIG_MACH_OPENRD_BASE
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -226,7 +226,7 @@
#ifdef CONFIG_MACH_OPENRD_CLIENT
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -238,7 +238,7 @@
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@
MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -149,7 +149,7 @@
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@
MACHINE_START(T5325, "HP t5325 Thin Client")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3ca4f8e..a5fcc7c 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,7 +223,7 @@
MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index 1338cb3..fb91a71 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,7 +121,7 @@
MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index e2e3cba..8f67a75 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,7 +53,7 @@
MACHINE_START(KS8695, "KS8695 Centaur Development Board")
/* Maintainer: Micrel Semiconductor Inc. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7993b09..9b621e1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -382,7 +382,7 @@
MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
/* Maintainer: Kevin Wells, NXP Semiconductors */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 18a3c97..16c86f8 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = halibut_fixup,
.map_io = halibut_map_io,
.init_irq = halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7a9a03e..8a1672e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@
extern struct sys_timer msm_timer;
MACHINE_START(MAHIMAHI, "mahimahi")
- .boot_params = 0x20000100,
+ .atag_offset = 0x100,
.fixup = mahimahi_fixup,
.map_io = mahimahi_map_io,
.init_irq = msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..a807655 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -130,7 +130,7 @@
}
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -138,7 +138,7 @@
MACHINE_END
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -146,7 +146,7 @@
MACHINE_END
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -154,7 +154,7 @@
MACHINE_END
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index b7a8496..5a2ab68 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -106,7 +106,7 @@
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
@@ -114,7 +114,7 @@
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
@@ -122,7 +122,7 @@
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..51109b1 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -193,7 +193,7 @@
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
@@ -201,7 +201,7 @@
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 68f930f..dc0bcb5 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -105,7 +105,7 @@
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 8143867..22d5694 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@
}
MACHINE_START(TROUT, "HTC Dream")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = trout_fixup,
.map_io = trout_map_io,
.init_irq = trout_init_irq,
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f12..0e94268 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@
MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wxl_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe..50b85ae 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14..e85222e 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@
MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index b0a140a..190a6e7 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -290,7 +290,7 @@
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 452a087..72410d2 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -328,7 +328,7 @@
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index e5db7c1..f988be7 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -168,7 +168,7 @@
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index a320094..622b2de 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -414,7 +414,7 @@
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index bfbc300..d231b3e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -278,7 +278,7 @@
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 00f2721..d4e98f0 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -264,7 +264,7 @@
};
MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203..90903dd 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@
}
MACHINE_START(NXDB500, "Hilscher nxdb500")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe..c63384a 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@
}
MACHINE_START(NXDKN, "Hilscher nxdkn")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd..8f548ec 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@
}
MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 1399303..398a75f 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -276,7 +276,7 @@
MACHINE_START(NOMADIK, "NHK8815")
/* Maintainer: ST MicroElectronics */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
.timer = &nomadik_timer,
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index d702570..1f741b1 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,7 +35,6 @@
MACHINE_START(NUC932EVB, "NUC932EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc932evb_map_io,
.init_irq = nuc93x_init_irq,
.init_machine = nuc932evb_init,
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 312ea6b..eb36b25 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -386,7 +386,7 @@
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = ams_delta_map_io,
.reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a6b1bea..999789c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -389,7 +389,7 @@
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 04fc356..23cc9e4 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -94,7 +94,7 @@
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
/* Maintainer: Tony Lindgren <tony@atomide.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_generic_map_io,
.reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7fb1a..6c70c28 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -461,7 +461,7 @@
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = h2_map_io,
.reserve = omap_reserve,
.init_irq = h2_init_irq,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 31f3487..8e2b64a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -449,7 +449,7 @@
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = h3_map_io,
.reserve = omap_reserve,
.init_irq = h3_init_irq,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 36e06ea..e81ead1 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -611,7 +611,7 @@
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = htcherald_map_io,
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 0b1ba46..8b03459 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -459,7 +459,7 @@
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = innovator_map_io,
.reserve = omap_reserve,
.init_irq = innovator_init_irq,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 5469ce2..6825635 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -264,7 +264,7 @@
}
MACHINE_START(NOKIA770, "Nokia 770")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_nokia770_map_io,
.reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b08a213..44b8e93 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -583,7 +583,7 @@
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = osk_map_io,
.reserve = omap_reserve,
.init_irq = osk_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 459cb6b..3d8cd90 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -275,7 +275,7 @@
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmte_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index b214f45..d0eefe8 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,7 +321,7 @@
}
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmtt_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9b0ea48..98e79bc 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -341,7 +341,7 @@
}
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmz71_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmz71_init_irq,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 67acd41..ad3a156 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -350,7 +350,7 @@
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 9c3b7c5..602b55c 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -421,7 +421,7 @@
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_sx1_map_io,
.reserve = omap_reserve,
.init_irq = omap_sx1_init_irq,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 036edc0e..8016515 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -301,7 +301,7 @@
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = voiceblue_map_io,
.reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 870886a..1cfa1b6 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,6 +121,7 @@
#endif
omap_sram_init();
+ omap_init_consistent_dma_size();
}
/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ab7395d..91f9abb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -31,6 +31,7 @@
static int dsp_use;
static struct clk *api_clk;
static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -78,6 +79,17 @@
.free = omap1_mcbsp_free,
};
+#define OMAP7XX_MCBSP1_BASE 0xfffb1000
+#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE 0xe1011800
+#define OMAP1510_MCBSP2_BASE 0xfffb1000
+#define OMAP1510_MCBSP3_BASE 0xe1017000
+
+#define OMAP1610_MCBSP1_BASE 0xe1011800
+#define OMAP1610_MCBSP2_BASE 0xfffb1000
+#define OMAP1610_MCBSP3_BASE 0xe1017000
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
struct resource omap7xx_mcbsp_res[][6] = {
{
@@ -369,6 +381,39 @@
#define OMAP16XX_MCBSP_COUNT 0
#endif
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
+{
+ int i;
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
+ config[i].reg_size = 2;
+ config[i].reg_step = 2;
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f343365..cd45c04 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -116,9 +116,12 @@
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o
+ clockdomains2xxx_3xxx_data.o \
+ clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomain44xx.o \
clockdomains44xx_data.o
@@ -185,78 +188,66 @@
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
- hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
- hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
- hsmmc.o \
- board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO) += board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o \
- hsmmc.o
+ sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
sdram-nokia.o \
board-rx51-peripherals.o \
- board-rx51-video.o \
- hsmmc.o
+ board-rx51-video.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
- board-zoom-display.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
- hsmmc.o
+ board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
- hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
- hsmmc.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
- hsmmc.o \
+ omap_phy_internal.o
+
+obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
- omap_phy_internal.o \
+ omap_phy_internal.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
-obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
- hsmmc.o
+obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+
# Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
+obj-y += $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
+obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2028464..bb5452e 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -141,12 +141,6 @@
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -235,6 +229,7 @@
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap2_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
@@ -248,18 +243,12 @@
"Secondary LCD backlight");
}
-static void __init omap_2430sdp_map_io(void)
-{
- omap2_set_globals_243x();
- omap243x_map_common_io();
-}
-
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_2430sdp_map_io,
- .init_early = omap_2430sdp_init_early,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cf..5b5999c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -225,12 +225,6 @@
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
-static void __init omap_3430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -719,6 +713,7 @@
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
+ omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -729,10 +724,10 @@
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_3430sdp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e4f37b5..f552305 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -70,13 +70,6 @@
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
-static void __init omap_sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
zoom_display_init();
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -215,10 +210,10 @@
}
MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_sdp_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index c7cef44..6a4fbb2 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -389,12 +389,6 @@
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
@@ -809,6 +803,7 @@
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
@@ -830,18 +825,12 @@
omap_4430sdp_display_init();
}
-static void __init omap_4430sdp_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 933e935..7834536 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,12 +47,6 @@
};
#endif
-static void __init am3517_crane_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -98,10 +93,10 @@
}
MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_crane_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c3..65a5912 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -362,11 +362,6 @@
/*
* Board initialization
*/
-static void __init am3517_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -490,10 +486,10 @@
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_evm_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7021170..29c409b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -273,12 +273,6 @@
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
@@ -340,20 +334,15 @@
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
-}
-
-static void __init omap_apollon_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
+ omap_sdrc_init(NULL, NULL);
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_apollon_map_io,
- .init_early = omap_apollon_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab..5665e68 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -471,13 +471,6 @@
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
-static void __init cm_t35_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
@@ -634,20 +629,20 @@
}
MACHINE_START(CM_T35, "Compulab CM-T35")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 05c72f4..3f4dc66 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -251,12 +251,6 @@
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
-static void __init cm_t3517_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
@@ -299,10 +294,10 @@
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t3517_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b6002ec..556df32 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -397,19 +397,6 @@
},
};
-
-static void __init devkit8000_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
- omap3_init_irq();
-}
-
#define OMAP_DM9000_BASE 0x2c000000
static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_dm9000_init();
@@ -667,11 +656,11 @@
}
MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = devkit8000_init_early,
- .init_irq = devkit8000_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index aa1b0cb..30a6f52 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,11 +148,6 @@
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
/**
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c240a3f..d25503a 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -24,7 +24,26 @@
int nr_parts;
};
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
extern void board_flash_init(struct flash_partitions [],
char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+ char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 54db41a..e8d45d3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -36,12 +36,12 @@
static void __init omap_generic_init_early(void)
{
omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
}
static void __init omap_generic_init(void)
{
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
}
@@ -66,7 +66,7 @@
/* XXX This machine entry name should be updated */
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap_generic_map_io,
.init_early = omap_generic_init_early,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 45de2b3..fe75c19 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -290,17 +290,6 @@
{ OMAP_TAG_LCD, &h4_lcd_config },
};
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
- omap2_init_irq();
-}
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -371,22 +360,17 @@
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
h4_init_flash();
}
-static void __init omap_h4_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_h4_map_io,
- .init_early = omap_h4_init_early,
- .init_irq = omap_h4_init_irq,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
+ .init_irq = omap2_init_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778..e20cad6 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -491,13 +491,6 @@
&igep_vwlan_device,
};
-static void __init igep_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(m65kxxxxam_sdrc_params,
- m65kxxxxam_sdrc_params);
-}
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
omap_serial_init();
+ omap_sdrc_init(m65kxxxxam_sdrc_params,
+ m65kxxxxam_sdrc_params);
usb_musb_init(NULL);
igep_flash_init();
@@ -672,20 +667,20 @@
}
MACHINE_START(IGEP0020, "IGEP v2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 218764c..0fa28be 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -193,12 +193,6 @@
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
-static void __init omap_ldp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -325,6 +319,7 @@
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
@@ -333,10 +328,10 @@
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_ldp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e11f0c5..e9d5f4a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -616,18 +616,6 @@
},
};
-static void __init n8x0_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
@@ -689,36 +677,37 @@
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..3826493 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -447,13 +447,6 @@
static void __init omap3_beagle_init_early(void)
{
omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
- omap3_init_irq();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -534,6 +527,8 @@
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -557,11 +552,11 @@
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_beagle_init_early,
- .init_irq = omap3_beagle_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f..aa6a935 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -520,12 +520,6 @@
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
-static void __init omap3_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -640,6 +634,7 @@
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
@@ -681,10 +676,10 @@
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_evm_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 703aeb5..7c0f193 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -182,12 +182,6 @@
gpmc_smsc911x_init(&board_smsc911x_data);
}
-static void __init omap3logic_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
board_mmc_init();
board_smsc911x_init();
@@ -209,18 +204,18 @@
}
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 080d7bd..fed2f7d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -525,13 +525,6 @@
}
};
-static void __init omap3pandora_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static void __init pandora_wl1251_init(void)
{
struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@
ARRAY_SIZE(omap3pandora_devices));
omap_display_init(&pandora_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -606,10 +601,10 @@
}
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3pandora_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e10498..170e1eb 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -428,17 +428,6 @@
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
-static void __init omap3_stalker_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@@ -478,6 +467,7 @@
omap_display_init(&omap3_stalker_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -494,10 +484,10 @@
MACHINE_START(SBC3530, "OMAP3 STALKER")
/* Maintainer: Jason Lam -lzg@ema-tech.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3_stalker_init_early,
- .init_irq = omap3_stalker_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 852ea04..c2d5348 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -326,18 +326,6 @@
};
#endif
-static void __init omap3_touchbook_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&omap3_touchbook_lcd_device,
&leds_gpio,
@@ -385,6 +373,8 @@
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -404,11 +394,11 @@
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_touchbook_init_early,
- .init_irq = omap3_touchbook_init_irq,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..2141894 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -95,12 +95,6 @@
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -569,24 +563,19 @@
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a99..9f13dc2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -478,13 +478,6 @@
return 0;
}
-static void __init overo_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -514,6 +507,8 @@
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_nand_flash_init(0, overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions));
usb_musb_init(NULL);
@@ -561,10 +556,10 @@
}
MACHINE_START(OVERO, "Gumstix Overo")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = overo_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 7dfed24..616fb39 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -123,15 +123,6 @@
omap2_hsmmc_init(mmc);
}
-static void __init rm680_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@
static void __init rm680_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(NULL);
rm680_peripherals_init();
}
-static void __init rm680_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = rm680_map_io,
- .init_early = rm680_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 5ea142f..74c8aad 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -102,15 +102,6 @@
{ OMAP_TAG_LCD, &rx51_lcd_config },
};
-static void __init rx51_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@ -127,11 +118,17 @@
static void __init rx51_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
@@ -142,12 +139,6 @@
platform_device_register(&leds_gpio);
}
-static void __init rx51_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static void __init rx51_reserve(void)
{
rx51_video_mem_init();
@@ -156,10 +147,10 @@
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = rx51_reserve,
- .map_io = rx51_map_io,
- .init_early = rx51_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index a85d5b0..e26c79c 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -27,15 +27,10 @@
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
-static void __init ti8168_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = ti8168_evm_config;
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
@@ -48,9 +43,9 @@
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
- .init_early = ti8168_init_early,
+ .init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 8a98c3c..be6684d 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -34,17 +34,6 @@
#define ZOOM3_EHCI_RESET_GPIO 64
-static void __init omap_zoom_init_early(void)
-{
- omap2_init_common_infrastructure();
- if (machine_is_omap_zoom2())
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- else if (machine_is_omap_zoom3())
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -129,24 +118,32 @@
ZOOM_NAND_CS, NAND_BUSWIDTH_16);
zoom_debugboard_init();
zoom_peripherals_init();
+
+ if (machine_is_omap_zoom2())
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ else if (machine_is_omap_zoom3())
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
+
zoom_display_init();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index b9b8446..dadb8c6 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3472,7 +3472,16 @@
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ /*
+ * 3505 must be tested before 3517, since 3517 returns true
+ * for both AM3517 chips and AM3517 family chips, which
+ * includes 3505. Unfortunately there's no obvious family
+ * test for 3517/3505 :-(
+ */
+ if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_34XX;
+ cpu_clkflg = CK_3505;
+ } else if (cpu_is_omap3517()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_3517;
} else if (cpu_is_omap3505()) {
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8f08906..8480ee4 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -73,9 +73,6 @@
if (!clkdm || !clkdm->name)
return -EINVAL;
- if (!omap_chip_is(clkdm->omap_chip))
- return -EINVAL;
-
pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@
{
struct clkdm_dep *cd;
- if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+ if (!clkdm || !deps)
return ERR_PTR(-EINVAL);
for (cd = deps; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
if (!cd->clkdm && cd->clkdm_name)
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -148,9 +142,6 @@
if (!autodep)
return;
- if (!omap_chip_is(autodep->omap_chip))
- return;
-
clkdm = clkdm_lookup(autodep->clkdm.name);
if (!clkdm) {
pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -216,9 +204,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -243,8 +228,6 @@
struct clkdm_dep *cd;
for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (cd->clkdm)
continue;
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@
/* Public functions */
/**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
*
- * Set up internal state. If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those. No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs. Should be called
+ * before any other clkdm_register*() function. Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void clkdm_init(struct clockdomain **clkdms,
- struct clkdm_autodep *init_autodeps,
- struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+ if (!co)
+ return -EINVAL;
+
+ if (arch_clkdm)
+ return -EEXIST;
+
+ arch_clkdm = co;
+
+ return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC. Must
+ * be called after clkdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
{
struct clockdomain **c = NULL;
- struct clockdomain *clkdm;
- struct clkdm_autodep *autodep = NULL;
- if (!custom_funcs)
- WARN(1, "No custom clkdm functions registered\n");
- else
- arch_clkdm = custom_funcs;
+ if (!arch_clkdm)
+ return -EACCES;
- if (clkdms)
- for (c = clkdms; *c; c++)
- _clkdm_register(*c);
+ if (!cs)
+ return -EINVAL;
- autodeps = init_autodeps;
+ for (c = cs; *c; c++)
+ _clkdm_register(*c);
+
+ return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies." These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy. However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+ struct clkdm_autodep *a = NULL;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
+ if (!ia)
+ return -EINVAL;
+
if (autodeps)
- for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
- _autodep_lookup(autodep);
+ return -EEXIST;
- /*
- * Put all clockdomains into software-supervised mode; PM code
- * should later enable hardware-supervised mode as appropriate
- */
+ autodeps = ia;
+ for (a = autodeps; a->clkdm.ptr; a++)
+ _autodep_lookup(a);
+
+ return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate. Must be
+ * called after clkdm_register_clkdms(). Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
+ */
+int clkdm_complete_init(void)
+{
+ struct clockdomain *clkdm;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
list_for_each_entry(clkdm, &clkdm_list, node) {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@
_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
clkdm_clear_all_sleepdeps(clkdm);
}
+
+ return 0;
}
/**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 1e50c88..f7b5860 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -45,7 +45,6 @@
/**
* struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
* @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
*
* A clockdomain that should have wkdeps and sleepdeps added when a
* clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@
const char *name;
struct clockdomain *ptr;
} clkdm;
- const struct omap_chip_id omap_chip;
};
/**
* struct clkdm_dep - encode dependencies between clockdomains
* @clkdm_name: clockdomain name
* @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
* @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
* @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
*
@@ -81,7 +78,6 @@
struct clockdomain *clkdm;
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
- const struct omap_chip_id omap_chip;
};
/* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@
* @clkdm_offs: (OMAP4 only) CM clockdomain register offset
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
* @usecount: Usecount tracking
* @node: list_head to link all clockdomains together
*
@@ -126,7 +121,6 @@
const u16 clkdm_offs;
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
- const struct omap_chip_id omap_chip;
atomic_t usecount;
struct list_head node;
spinlock_t lock;
@@ -166,8 +160,11 @@
int (*clkdm_clk_disable)(struct clockdomain *clkdm);
};
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
- struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
#endif
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index f740edb..a0d68db 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
@@ -98,8 +96,6 @@
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index b43706a..935c7f0 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
new file mode 100644
index 0000000..0ab8e46
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -0,0 +1,154 @@
+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = mpu_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+ .name = "iva1_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2420_clkdm,
+ &iva1_2420_clkdm,
+ &dsp_2420_clkdm,
+ &gfx_2420_clkdm,
+ &core_l3_2420_clkdm,
+ &core_l4_2420_clkdm,
+ &dss_2420_clkdm,
+ NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+ if (!cpu_is_omap242x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap242x);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
new file mode 100644
index 0000000..3645ed0
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -0,0 +1,181 @@
+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = mpu_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+ .name = "mdm_clkdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = mdm_2430_wkdeps,
+ .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2430_clkdm,
+ &mdm_clkdm,
+ &dsp_2430_clkdm,
+ &gfx_2430_clkdm,
+ &core_l3_2430_clkdm,
+ &core_l4_2430_clkdm,
+ &dss_2430_clkdm,
+ NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+ if (!cpu_is_omap243x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap243x);
+ clkdm_complete_init();
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 13bde95..0a6a048 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 clockdomains
+ * OMAP2/3 clockdomain common data
*
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -51,374 +51,28 @@
* changed in software) are not included here yet, but should be.
*/
-/* OMAP2/3-common wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 24XX-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP2
-
/* Wakeup dependency source arrays */
-/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
-static struct clkdm_dep dsp_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
+/* 2xxx-specific possible dependencies */
+
+/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
+struct clkdm_dep gfx_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep mpu_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
+/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
+struct clkdm_dep dsp_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep core_24xx_wkdeps[] = {
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-/* 2430-specific possible wakeup dependencies */
-
-#ifdef CONFIG_SOC_OMAP2430
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- { NULL },
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/* OMAP3-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep per_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep usbhost_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
-static struct clkdm_dep mpu_3xxx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
-static struct clkdm_dep iva2_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
-static struct clkdm_dep cam_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
-static struct clkdm_dep dss_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct clkdm_dep neon_wkdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* Sleep dependency source arrays for OMAP3-specific clkdms */
-
-/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
-static struct clkdm_dep dss_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
-static struct clkdm_dep per_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
-static struct clkdm_dep usbhost_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_CAM: MPU */
-static struct clkdm_dep cam_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* OMAP2/3-common clockdomains
@@ -430,439 +84,18 @@
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
-static struct clockdomain wkup_clkdm = {
+struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain prm_clkdm = {
+struct clockdomain prm_common_clkdm = {
.name = "prm_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain cm_clkdm = {
+struct clockdomain cm_common_clkdm = {
.name = "cm_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-
-/*
- * 2420-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct clockdomain mpu_2420_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain iva1_2420_clkdm = {
- .name = "iva1_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dsp_2420_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain gfx_2420_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dss_2420_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-#endif /* CONFIG_SOC_OMAP2420 */
-
-
-/*
- * 2430-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct clockdomain mpu_2430_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
- .name = "mdm_clkdm",
- .pwrdm = { .name = "mdm_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = mdm_2430_wkdeps,
- .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dsp_2430_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain gfx_2430_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dss_2430_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/*
- * OMAP3 clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct clockdomain mpu_3xxx_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
- .dep_bit = OMAP3430_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_3xxx_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain neon_clkdm = {
- .name = "neon_clkdm",
- .pwrdm = { .name = "neon_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = neon_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain iva2_clkdm = {
- .name = "iva2_clkdm",
- .pwrdm = { .name = "iva2_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
- .wkdep_srcs = iva2_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain gfx_3430es1_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
-};
-
-static struct clockdomain sgx_clkdm = {
- .name = "sgx_clkdm",
- .pwrdm = { .name = "sgx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-/*
- * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
- * then that information was removed from the 34xx ES2+ TRM. It is
- * unclear whether the core is still there, but the clockdomain logic
- * is there, and must be programmed to an appropriate state if the
- * CORE clockdomain is to become inactive.
- */
-static struct clockdomain d2d_clkdm = {
- .name = "d2d_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_3xxx_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_3xxx_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/* Another case of bit name collisions between several registers: EN_DSS */
-static struct clockdomain dss_3xxx_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "dss_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
- .wkdep_srcs = dss_wkdeps,
- .sleepdep_srcs = dss_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain cam_clkdm = {
- .name = "cam_clkdm",
- .pwrdm = { .name = "cam_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = cam_wkdeps,
- .sleepdep_srcs = cam_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain usbhost_clkdm = {
- .name = "usbhost_clkdm",
- .pwrdm = { .name = "usbhost_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = usbhost_wkdeps,
- .sleepdep_srcs = usbhost_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-static struct clockdomain per_clkdm = {
- .name = "per_clkdm",
- .pwrdm = { .name = "per_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_EN_PER_SHIFT,
- .wkdep_srcs = per_wkdeps,
- .sleepdep_srcs = per_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
-static struct clockdomain emu_clkdm = {
- .name = "emu_clkdm",
- .pwrdm = { .name = "emu_pwrdm" },
- .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll1_clkdm = {
- .name = "dpll1_clkdm",
- .pwrdm = { .name = "dpll1_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll2_clkdm = {
- .name = "dpll2_clkdm",
- .pwrdm = { .name = "dpll2_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll3_clkdm = {
- .name = "dpll3_clkdm",
- .pwrdm = { .name = "dpll3_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll4_clkdm = {
- .name = "dpll4_clkdm",
- .pwrdm = { .name = "dpll4_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll5_clkdm = {
- .name = "dpll5_clkdm",
- .pwrdm = { .name = "dpll5_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
-/*
- * Clockdomain hwsup dependencies (OMAP3 only)
- */
-
-static struct clkdm_autodep clkdm_autodeps[] = {
- {
- .clkdm = { .name = "mpu_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = "iva2_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = NULL },
- }
-};
-
-static struct clockdomain *clockdomains_omap2[] __initdata = {
- &wkup_clkdm,
- &cm_clkdm,
- &prm_clkdm,
-
-#ifdef CONFIG_SOC_OMAP2420
- &mpu_2420_clkdm,
- &iva1_2420_clkdm,
- &dsp_2420_clkdm,
- &gfx_2420_clkdm,
- &core_l3_2420_clkdm,
- &core_l4_2420_clkdm,
- &dss_2420_clkdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mpu_2430_clkdm,
- &mdm_clkdm,
- &dsp_2430_clkdm,
- &gfx_2430_clkdm,
- &core_l3_2430_clkdm,
- &core_l4_2430_clkdm,
- &dss_2430_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
- &mpu_3xxx_clkdm,
- &neon_clkdm,
- &iva2_clkdm,
- &gfx_3430es1_clkdm,
- &sgx_clkdm,
- &d2d_clkdm,
- &core_l3_3xxx_clkdm,
- &core_l4_3xxx_clkdm,
- &dss_3xxx_clkdm,
- &cam_clkdm,
- &usbhost_clkdm,
- &per_clkdm,
- &emu_clkdm,
- &dpll1_clkdm,
- &dpll2_clkdm,
- &dpll3_clkdm,
- &dpll4_clkdm,
- &dpll5_clkdm,
-#endif
- NULL,
-};
-
-void __init omap2xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations);
-}
-
-void __init omap3xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations);
-}
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
new file mode 100644
index 0000000..b84e138
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP3xxx clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP3xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP3-specific possible dependencies */
+
+/*
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm", },
+ { .clkdm_name = "mpu_clkdm", },
+ { .clkdm_name = "wkup_clkdm", },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * OMAP3 clockdomains
+ */
+
+static struct clockdomain mpu_3xxx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_3xxx_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
+static struct clockdomain neon_clkdm = {
+ .name = "neon_clkdm",
+ .pwrdm = { .name = "neon_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = neon_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+};
+
+static struct clockdomain iva2_clkdm = {
+ .name = "iva2_clkdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+};
+
+static struct clockdomain sgx_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM. It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+ .name = "d2d_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_wkdeps,
+ .sleepdep_srcs = dss_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
+static struct clockdomain cam_clkdm = {
+ .name = "cam_clkdm",
+ .pwrdm = { .name = "cam_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = cam_wkdeps,
+ .sleepdep_srcs = cam_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+};
+
+static struct clockdomain usbhost_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = usbhost_wkdeps,
+ .sleepdep_srcs = usbhost_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
+static struct clockdomain per_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_wkdeps,
+ .sleepdep_srcs = per_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
+static struct clockdomain emu_clkdm = {
+ .name = "emu_clkdm",
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+};
+
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+};
+
+/*
+ * Clockdomain hwsup dependencies
+ */
+
+static struct clkdm_autodep clkdm_autodeps[] = {
+ {
+ .clkdm = { .name = "mpu_clkdm" },
+ },
+ {
+ .clkdm = { .name = "iva2_clkdm" },
+ },
+ {
+ .clkdm = { .name = NULL },
+ }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_3xxx_clkdm,
+ &neon_clkdm,
+ &iva2_clkdm,
+ &d2d_clkdm,
+ &core_l3_3xxx_clkdm,
+ &core_l4_3xxx_clkdm,
+ &dss_3xxx_clkdm,
+ &cam_clkdm,
+ &per_clkdm,
+ &emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ NULL
+};
+
+static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
+ &gfx_3430es1_clkdm,
+ NULL,
+};
+
+static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
+ &sgx_clkdm,
+ &dpll5_clkdm,
+ &usbhost_clkdm,
+ NULL,
+};
+
+void __init omap3xxx_clockdomains_init(void)
+{
+ struct clockdomain **sc;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ clkdm_register_platform_funcs(&omap3_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap3430_common);
+
+ sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
+ clockdomains_omap3430es2plus;
+
+ clkdm_register_clkdms(sc);
+
+ clkdm_register_autodeps(clkdm_autodeps);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index dccc651..9299ac2 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -34,350 +34,122 @@
/* Static Dependencies for OMAP4 Clock Domains */
static struct clkdm_dep d2d_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dma_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_init_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep mpu_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep tesla_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
@@ -388,7 +160,6 @@
.cm_inst = OMAP4430_CM2_CEFUSE_INST,
.clkdm_offs = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_cfg_44xx_clkdm = {
@@ -399,7 +170,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
.dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain tesla_44xx_clkdm = {
@@ -412,7 +182,6 @@
.wkdep_srcs = tesla_wkup_sleep_deps,
.sleepdep_srcs = tesla_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_gfx_44xx_clkdm = {
@@ -425,7 +194,6 @@
.wkdep_srcs = l3_gfx_wkup_sleep_deps,
.sleepdep_srcs = l3_gfx_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ivahd_44xx_clkdm = {
@@ -438,7 +206,6 @@
.wkdep_srcs = ivahd_wkup_sleep_deps,
.sleepdep_srcs = ivahd_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_secure_44xx_clkdm = {
@@ -451,7 +218,6 @@
.wkdep_srcs = l4_secure_wkup_sleep_deps,
.sleepdep_srcs = l4_secure_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_per_44xx_clkdm = {
@@ -462,7 +228,6 @@
.clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
.dep_bit = OMAP4430_L4PER_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain abe_44xx_clkdm = {
@@ -473,7 +238,6 @@
.clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS,
.dep_bit = OMAP4430_ABE_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_instr_44xx_clkdm = {
@@ -482,7 +246,6 @@
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_init_44xx_clkdm = {
@@ -495,7 +258,6 @@
.wkdep_srcs = l3_init_wkup_sleep_deps,
.sleepdep_srcs = l3_init_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain d2d_44xx_clkdm = {
@@ -507,7 +269,6 @@
.wkdep_srcs = d2d_wkup_sleep_deps,
.sleepdep_srcs = d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu0_44xx_clkdm = {
@@ -517,7 +278,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU0_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu1_44xx_clkdm = {
@@ -527,7 +287,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU1_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_emif_44xx_clkdm = {
@@ -538,7 +297,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
.dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_ao_44xx_clkdm = {
@@ -548,7 +306,6 @@
.cm_inst = OMAP4430_CM2_ALWAYS_ON_INST,
.clkdm_offs = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ducati_44xx_clkdm = {
@@ -561,7 +318,6 @@
.wkdep_srcs = ducati_wkup_sleep_deps,
.sleepdep_srcs = ducati_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu_44xx_clkdm = {
@@ -573,7 +329,6 @@
.wkdep_srcs = mpu_wkup_sleep_deps,
.sleepdep_srcs = mpu_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_2_44xx_clkdm = {
@@ -584,7 +339,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS,
.dep_bit = OMAP4430_L3_2_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_1_44xx_clkdm = {
@@ -595,7 +349,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS,
.dep_bit = OMAP4430_L3_1_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain iss_44xx_clkdm = {
@@ -607,7 +360,6 @@
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dss_44xx_clkdm = {
@@ -620,7 +372,6 @@
.wkdep_srcs = l3_dss_wkup_sleep_deps,
.sleepdep_srcs = l3_dss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_wkup_44xx_clkdm = {
@@ -631,7 +382,6 @@
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain emu_sys_44xx_clkdm = {
@@ -641,7 +391,6 @@
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dma_44xx_clkdm = {
@@ -653,7 +402,6 @@
.wkdep_srcs = l3_dma_wkup_sleep_deps,
.sleepdep_srcs = l3_dma_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* As clockdomains are added or removed above, this list must also be changed */
@@ -685,7 +433,10 @@
NULL
};
+
void __init omap44xx_clockdomains_init(void)
{
- clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations);
+ clkdm_register_platform_funcs(&omap4_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap44xx);
+ clkdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 3f20cbb..de61f15 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -56,6 +56,12 @@
{
__omap2_set_globals(&omap242x_globals);
}
+
+void __init omap242x_map_io(void)
+{
+ omap2_set_globals_242x();
+ omap242x_map_common_io();
+}
#endif
#if defined(CONFIG_SOC_OMAP2430)
@@ -74,6 +80,12 @@
{
__omap2_set_globals(&omap243x_globals);
}
+
+void __init omap243x_map_io(void)
+{
+ omap2_set_globals_243x();
+ omap243x_map_common_io();
+}
#endif
#if defined(CONFIG_ARCH_OMAP3)
@@ -138,5 +150,11 @@
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
}
+
+void __init omap4_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap44xx_map_common_io();
+}
#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 1077ad6..10adf66 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -44,7 +44,7 @@
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
@@ -61,12 +61,12 @@
if (!oh)
pr_err("could not look up %s\n", oh_name);
- od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
+ pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap3_l3_init);
@@ -74,7 +74,7 @@
{
int l, i;
struct omap_hwmod *oh[3];
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
@@ -92,12 +92,12 @@
pr_err("could not look up %s\n", oh_name);
}
- od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
+ pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
0, NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap4_l3_init);
@@ -232,7 +232,7 @@
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
struct omap4_keypad_platform_data *keypad_data;
unsigned int id = -1;
@@ -247,15 +247,15 @@
keypad_data = sdp4430_keypad_data;
- od = omap_device_build(name, id, oh, keypad_data,
+ pdev = omap_device_build(name, id, oh, keypad_data,
sizeof(struct omap4_keypad_platform_data),
omap_keyboard_latency,
ARRAY_SIZE(omap_keyboard_latency), 0);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
@@ -274,7 +274,7 @@
static inline void omap_init_mbox(void)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
@@ -282,10 +282,10 @@
return;
}
- od = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
+ pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
- WARN(IS_ERR(od), "%s: could not build device, err %ld\n",
- __func__, PTR_ERR(od));
+ WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
+ __func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
@@ -344,7 +344,7 @@
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
@@ -371,10 +371,10 @@
}
spi_num++;
- od = omap_device_build(name, spi_num, oh, pdata,
+ pdev = omap_device_build(name, spi_num, oh, pdata,
sizeof(*pdata), omap_mcspi_latency,
ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -709,7 +709,7 @@
static int __init omap_init_wdt(void)
{
int id = -1;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
@@ -723,10 +723,10 @@
return -EINVAL;
}
- od = omap_device_build(dev_name, id, oh, NULL, 0,
+ pdev = omap_device_build(dev_name, id, oh, NULL, 0,
omap_wdt_latency,
ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a5b7a23..18693f6 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -78,7 +78,7 @@
{
int r = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
int i, oh_count;
struct omap_display_platform_data pdata;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -108,13 +108,13 @@
return -ENODEV;
}
- od = omap_device_build(curr_dss_hwmod[i].dev_name,
+ pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
omap_dss_latency,
ARRAY_SIZE(omap_dss_latency), 0);
- if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+ if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index c9ff0e7..ae8cb3f 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -228,7 +228,7 @@
/* One time initializations */
static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_system_dma_plat_info *p;
struct resource *mem;
char *name = "omap_dma_system";
@@ -258,23 +258,23 @@
p->errata = configure_dma_errata();
- od = omap_device_build(name, 0, oh, p, sizeof(*p),
+ pdev = omap_device_build(name, 0, oh, p, sizeof(*p),
omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
kfree(p);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
- dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+ dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
return -EINVAL;
}
dma_base = ioremap(mem->start, resource_size(mem));
if (!dma_base) {
- dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+ dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
return -ENOMEM;
}
@@ -283,7 +283,7 @@
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+ dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
return -ENOMEM;
}
return 0;
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2765cdc..652ccc5 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -34,7 +34,7 @@
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
@@ -107,19 +107,19 @@
return -EINVAL;
}
- od = omap_device_build(name, id - 1, oh, pdata,
+ pdev = omap_device_build(name, id - 1, oh, pdata,
sizeof(*pdata), omap_gpio_latency,
ARRAY_SIZE(omap_gpio_latency),
false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
gpio_bank_count++;
return 0;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9b45c7..cc87919 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -430,7 +430,7 @@
void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_device_pm_latency *ohl;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
@@ -471,9 +471,9 @@
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
+ pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
@@ -482,7 +482,7 @@
* return device handle to board setup code
* required to populate for regulator framework structure
*/
- hsmmcinfo->dev = &od->pdev.dev;
+ hsmmcinfo->dev = &pdev->dev;
done:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 06d4a80..0b3ae9d 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -35,7 +35,7 @@
{
int retval = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
const char *oh_name = "spinlock";
const char *dev_name = "omap_hwspinlock";
@@ -48,13 +48,13 @@
if (oh == NULL)
return -EINVAL;
- od = omap_device_build(dev_name, 0, oh, NULL, 0,
+ pdev = omap_device_build(dev_name, 0, oh, NULL, 0,
omap_spinlock_latency,
ARRAY_SIZE(omap_spinlock_latency), false);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("Can't build omap_device for %s:%s\n", dev_name,
oh_name);
- retval = PTR_ERR(od);
+ retval = PTR_ERR(pdev);
}
return retval;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37efb86..d27daf9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,7 +28,6 @@
#include "control.h"
-static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
u32 omap_features;
@@ -39,19 +38,6 @@
}
EXPORT_SYMBOL(omap_rev);
-/**
- * omap_chip_is - test whether currently running OMAP matches a chip type
- * @oc: omap_chip_t to test against
- *
- * Test whether the currently-running OMAP chip matches the supplied
- * chip type 'oc'. Returns 1 upon a match; 0 upon failure.
- */
-int omap_chip_is(struct omap_chip_id oci)
-{
- return (oci.oc & omap_chip.oc) ? 1 : 0;
-}
-EXPORT_SYMBOL(omap_chip_is);
-
int omap_type(void)
{
u32 val = 0;
@@ -242,14 +228,12 @@
omap_features = OMAP3_HAS_NEON;
}
-static void __init omap3_check_revision(void)
+static void __init omap3_check_revision(const char **cpu_rev)
{
u32 cpuid, idcode;
u16 hawkeye;
u8 rev;
- omap_chip.oc = CHIP_IS_OMAP3430;
-
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -258,7 +242,7 @@
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ *cpu_rev = "1.0";
return;
}
@@ -279,77 +263,85 @@
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.0";
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.1";
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ *cpu_rev = "3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
-
- /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1.2";
}
break;
case 0xb868:
- /* Handle OMAP35xx/AM35xx devices
+ /*
+ * Handle OMAP/AM 3505/3517 devices
*
- * Set the device to be OMAP3505 here. Actual device
+ * Set the device to be OMAP3517 here. Actual device
* is identified later based on the features.
- *
- * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
- omap_revision = OMAP3505_REV(rev);
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP3517_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 1:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = OMAP3517_REV_ES1_1;
+ *cpu_rev = "1.1";
+ }
break;
case 0xb891:
/* Handle 36xx devices */
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
switch(rev) {
case 0: /* Take care of early samples */
omap_revision = OMAP3630_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
omap_revision = OMAP3630_REV_ES1_1;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+ *cpu_rev = "1.1";
break;
case 2:
+ /* FALLTHROUGH */
default:
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
}
break;
case 0xb81e:
- omap_chip.oc = CHIP_IS_TI816X;
-
switch (rev) {
case 0:
omap_revision = TI8168_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
- omap_revision = TI8168_REV_ES1_1;
- break;
+ /* FALLTHROUGH */
default:
- omap_revision = TI8168_REV_ES1_1;
+ omap_revision = TI8168_REV_ES1_1;
+ *cpu_rev = "1.1";
+ break;
}
break;
default:
- /* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ /* Unknown default to latest silicon rev as default */
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
+ pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
}
}
@@ -382,24 +374,20 @@
switch (rev) {
case 0:
omap_revision = OMAP4430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES1;
break;
case 1:
default:
omap_revision = OMAP4430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2;
}
break;
case 0xb95c:
switch (rev) {
case 3:
omap_revision = OMAP4430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_1;
break;
case 4:
default:
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
case 0xb94e:
@@ -407,14 +395,12 @@
case 0:
default:
omap_revision = OMAP4460_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -425,94 +411,33 @@
if (omap3_has_ ##feat()) \
printk(#feat" ");
-static void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(const char *cpu_rev)
{
- u8 rev = GET_OMAP_REVISION();
- char cpu_name[16], cpu_rev[16];
+ const char *cpu_name;
- /* OMAP3430 and OMAP3530 are assumed to be same.
+ /*
+ * OMAP3430 and OMAP3530 are assumed to be same.
*
* OMAP3525, OMAP3515 and OMAP3503 can be detected only based
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
if (cpu_is_omap3630()) {
- strcpy(cpu_name, "OMAP3630");
- } else if (cpu_is_omap3505()) {
- /*
- * AM35xx devices
- */
- if (omap3_has_sgx()) {
- omap_revision = OMAP3517_REV(rev);
- strcpy(cpu_name, "AM3517");
- } else {
- /* Already set in omap3_check_revision() */
- strcpy(cpu_name, "AM3505");
- }
+ cpu_name = "OMAP3630";
+ } else if (cpu_is_omap3517()) {
+ /* AM35xx devices */
+ cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
- strcpy(cpu_name, "TI816X");
+ cpu_name = "TI816X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
- strcpy(cpu_name, "OMAP3430/3530");
+ cpu_name = "OMAP3430/3530";
} else if (omap3_has_iva()) {
- omap_revision = OMAP3525_REV(rev);
- strcpy(cpu_name, "OMAP3525");
+ cpu_name = "OMAP3525";
} else if (omap3_has_sgx()) {
- omap_revision = OMAP3515_REV(rev);
- strcpy(cpu_name, "OMAP3515");
+ cpu_name = "OMAP3515";
} else {
- omap_revision = OMAP3503_REV(rev);
- strcpy(cpu_name, "OMAP3503");
- }
-
- if (cpu_is_omap3630() || cpu_is_ti816x()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "1.1");
- break;
- case OMAP_REVBITS_02:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.2");
- }
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.1");
- }
- } else {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "2.0");
- break;
- case OMAP_REVBITS_02:
- strcpy(cpu_rev, "2.1");
- break;
- case OMAP_REVBITS_03:
- strcpy(cpu_rev, "3.0");
- break;
- case OMAP_REVBITS_04:
- strcpy(cpu_rev, "3.1");
- break;
- case OMAP_REVBITS_05:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "3.1.2");
- }
+ cpu_name = "OMAP3503";
}
/* Print verbose information */
@@ -533,6 +458,8 @@
*/
void __init omap2_check_revision(void)
{
+ const char *cpu_rev;
+
/*
* At this point we have an idea about the processor revision set
* earlier with omap2_set_globals_tap().
@@ -540,7 +467,7 @@
if (cpu_is_omap24xx()) {
omap24xx_check_revision();
} else if (cpu_is_omap34xx()) {
- omap3_check_revision();
+ omap3_check_revision(&cpu_rev);
/* TI816X doesn't have feature register */
if (!cpu_is_ti816x())
@@ -548,7 +475,7 @@
else
ti816x_check_features();
- omap3_cpuinfo();
+ omap3_cpuinfo(cpu_rev);
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
@@ -557,22 +484,6 @@
} else {
pr_err("OMAP revision unknown, please fix!\n");
}
-
- /*
- * OK, now we know the exact revision. Initialize omap_chip bits
- * for powerdowmain and clockdomain code.
- */
- if (cpu_is_omap243x()) {
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;
- return;
- } else if (cpu_is_omap242x()) {
- /* Currently only supports 2420ES2.1.1 and 2420-all */
- omap_chip.oc |= CHIP_IS_OMAP2420;
- return;
- }
-
- pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2ce1ce6..c14308c 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -16,7 +16,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -250,6 +249,7 @@
omap2_check_revision();
omap_sram_init();
+ omap_init_consistent_dma_size();
}
#ifdef CONFIG_SOC_OMAP2420
@@ -341,12 +341,12 @@
u8 postsetup_state;
if (cpu_is_omap242x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
+ omap242x_powerdomains_init();
+ omap242x_clockdomains_init();
omap2420_hwmod_init();
} else if (cpu_is_omap243x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
+ omap243x_powerdomains_init();
+ omap243x_clockdomains_init();
omap2430_hwmod_init();
} else if (cpu_is_omap34xx()) {
omap3xxx_powerdomains_init();
@@ -376,7 +376,7 @@
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
- * omap2_init_common_infra() and omap2_init_common_devices().
+ * omap2_init_common_infra() and omap_sdrc_init().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
@@ -400,7 +400,47 @@
pr_err("Could not init clock framework - unknown SoC\n");
}
-void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+void __init omap2420_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap2430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3630_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init am35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init ti816x_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap4430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 4a6ef6a..5063f25 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -27,66 +27,69 @@
#include "control.h"
-/* McBSP internal signal muxing functions */
+/*
+ * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
+ * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
+ */
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
-void omap2_mcbsp1_mux_clkr_src(u8 mux)
+/* McBSP internal signal muxing function */
+static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == CLKR_SRC_CLKR)
- v &= ~OMAP2_MCBSP1_CLKR_MASK;
- else if (mux == CLKR_SRC_CLKX)
- v |= OMAP2_MCBSP1_CLKR_MASK;
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
-void omap2_mcbsp1_mux_fsr_src(u8 mux)
-{
- u32 v;
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP2_MCBSP1_CLKR_MASK;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP2_MCBSP1_CLKR_MASK;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP2_MCBSP1_FSR_MASK;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP2_MCBSP1_FSR_MASK;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == FSR_SRC_FSR)
- v &= ~OMAP2_MCBSP1_FSR_MASK;
- else if (mux == FSR_SRC_FSX)
- v |= OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+
+ return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
/* McBSP CLKS source switching function */
-
-int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
+ const char *src)
{
- struct omap_mcbsp *mcbsp;
struct clk *fck_src;
char *fck_src_name;
int r;
- if (!omap_mcbsp_check_valid_id(id)) {
- pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
- return -EINVAL;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ if (!strcmp(src, "clks_ext"))
fck_src_name = "pad_fck";
- else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ else if (!strcmp(src, "clks_fclk"))
fck_src_name = "prcm_fck";
else
return -EINVAL;
- fck_src = clk_get(mcbsp->dev, fck_src_name);
+ fck_src = clk_get(dev, fck_src_name);
if (IS_ERR_OR_NULL(fck_src)) {
pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
fck_src_name);
return -EINVAL;
}
- pm_runtime_put_sync(mcbsp->dev);
+ pm_runtime_put_sync(dev);
- r = clk_set_parent(mcbsp->fclk, fck_src);
+ r = clk_set_parent(clk, fck_src);
if (IS_ERR_VALUE(r)) {
pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
"clks", fck_src_name);
@@ -94,13 +97,30 @@
return -EINVAL;
}
- pm_runtime_get_sync(mcbsp->dev);
+ pm_runtime_get_sync(dev);
clk_put(fck_src);
return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
+
+static int omap3_enable_st_clock(unsigned int id, bool enable)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (enable)
+ w &= ~(1 << (id - 2));
+ else
+ w |= 1 << (id - 2);
+ omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ return 0;
+}
struct omap_device_pm_latency omap2_mcbsp_latency[] = {
{
@@ -116,7 +136,7 @@
char *name = "omap-mcbsp";
struct omap_hwmod *oh_device[2];
struct omap_mcbsp_platform_data *pdata = NULL;
- struct omap_device *od;
+ struct platform_device *pdev;
sscanf(oh->name, "mcbsp%d", &id);
@@ -126,7 +146,13 @@
return -ENOMEM;
}
- pdata->mcbsp_config_type = oh->class->rev;
+ pdata->reg_step = 4;
+ if (oh->class->rev < MCBSP_CONFIG_TYPE2) {
+ pdata->reg_size = 2;
+ } else {
+ pdata->reg_size = 4;
+ pdata->has_ccr = true;
+ }
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -137,22 +163,29 @@
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
oh_device[1] = omap_hwmod_lookup((
(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
+ pdata->enable_st_clock = omap3_enable_st_clock;
count++;
}
- od = omap_device_build_ss(name, id, oh_device, count, pdata,
+ pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
sizeof(*pdata), omap2_mcbsp_latency,
ARRAY_SIZE(omap2_mcbsp_latency), false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 84cc0bd..d713807 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1954,9 +1954,6 @@
i = 0;
do {
- if (!omap_chip_is(ohs[i]->omap_chip))
- continue;
-
r = _register(ohs[i]);
WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
r);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..b6ea69a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -100,7 +100,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters),
.slaves = omap2420_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -206,7 +205,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -227,7 +225,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -243,7 +240,6 @@
.main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -271,7 +267,6 @@
.class = &iva_hwmod_class,
.masters = omap2420_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2420_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer1 */
@@ -317,7 +312,6 @@
.slaves = omap2420_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer2 */
@@ -354,7 +348,6 @@
.slaves = omap2420_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer3 */
@@ -391,7 +384,6 @@
.slaves = omap2420_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer4 */
@@ -428,7 +420,6 @@
.slaves = omap2420_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer5 */
@@ -465,7 +456,6 @@
.slaves = omap2420_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
@@ -503,7 +493,6 @@
.slaves = omap2420_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer7 */
@@ -540,7 +529,6 @@
.slaves = omap2420_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer8 */
@@ -577,7 +565,6 @@
.slaves = omap2420_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer9 */
@@ -614,7 +601,6 @@
.slaves = omap2420_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer10 */
@@ -651,7 +637,6 @@
.slaves = omap2420_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer11 */
@@ -688,7 +673,6 @@
.slaves = omap2420_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer12 */
@@ -725,7 +709,6 @@
.slaves = omap2420_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* l4_wkup -> wd_timer2 */
@@ -766,7 +749,6 @@
},
.slaves = omap2420_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART1 */
@@ -792,7 +774,6 @@
.slaves = omap2420_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART2 */
@@ -818,7 +799,6 @@
.slaves = omap2420_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART3 */
@@ -844,7 +824,6 @@
.slaves = omap2420_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dss */
@@ -898,7 +877,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -938,7 +916,6 @@
},
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -975,7 +952,6 @@
},
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1013,7 +989,6 @@
},
.slaves = omap2420_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1064,7 +1039,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1092,7 +1066,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1197,7 +1170,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio2 */
@@ -1223,7 +1195,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio3 */
@@ -1249,7 +1220,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio4 */
@@ -1275,7 +1245,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dma attributes */
@@ -1322,7 +1291,6 @@
.masters = omap2420_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1363,7 +1331,6 @@
},
.slaves = omap2420_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi1 */
@@ -1393,7 +1360,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi2 */
@@ -1423,7 +1389,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -1473,7 +1438,6 @@
},
.slaves = omap2420_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcbsp2 */
@@ -1514,7 +1478,6 @@
},
.slaves = omap2420_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 408193d..56de8d6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -110,7 +110,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters),
.slaves = omap2430_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -250,7 +249,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -301,7 +299,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -317,7 +314,6 @@
.main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -345,7 +341,6 @@
.class = &iva_hwmod_class,
.masters = omap2430_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2430_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer1 */
@@ -391,7 +386,6 @@
.slaves = omap2430_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer2 */
@@ -428,7 +422,6 @@
.slaves = omap2430_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer3 */
@@ -465,7 +458,6 @@
.slaves = omap2430_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer4 */
@@ -502,7 +494,6 @@
.slaves = omap2430_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer5 */
@@ -539,7 +530,6 @@
.slaves = omap2430_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer6 */
@@ -576,7 +566,6 @@
.slaves = omap2430_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer7 */
@@ -613,7 +602,6 @@
.slaves = omap2430_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer8 */
@@ -650,7 +638,6 @@
.slaves = omap2430_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer9 */
@@ -687,7 +674,6 @@
.slaves = omap2430_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer10 */
@@ -724,7 +710,6 @@
.slaves = omap2430_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer11 */
@@ -761,7 +746,6 @@
.slaves = omap2430_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer12 */
@@ -798,7 +782,6 @@
.slaves = omap2430_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* l4_wkup -> wd_timer2 */
@@ -839,7 +822,6 @@
},
.slaves = omap2430_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART1 */
@@ -865,7 +847,6 @@
.slaves = omap2430_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART2 */
@@ -891,7 +872,6 @@
.slaves = omap2430_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART3 */
@@ -917,7 +897,6 @@
.slaves = omap2430_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dss */
@@ -965,7 +944,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -999,7 +977,6 @@
},
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1030,7 +1007,6 @@
},
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1062,7 +1038,6 @@
},
.slaves = omap2430_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1123,7 +1098,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C2 */
@@ -1151,7 +1125,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* l4_wkup -> gpio1 */
@@ -1273,7 +1246,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio2 */
@@ -1299,7 +1271,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio3 */
@@ -1325,7 +1296,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio4 */
@@ -1351,7 +1321,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio5 */
@@ -1382,7 +1351,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dma attributes */
@@ -1429,7 +1397,6 @@
.masters = omap2430_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1469,7 +1436,6 @@
},
.slaves = omap2430_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi1 */
@@ -1499,7 +1465,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi2 */
@@ -1529,7 +1494,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi3 */
@@ -1572,7 +1536,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -1628,7 +1591,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/*
@@ -1689,7 +1651,6 @@
},
.slaves = omap2430_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp2 */
@@ -1731,7 +1692,6 @@
},
.slaves = omap2430_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp3 */
@@ -1783,7 +1743,6 @@
},
.slaves = omap2430_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp4 */
@@ -1841,7 +1800,6 @@
},
.slaves = omap2430_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp5 */
@@ -1899,7 +1857,6 @@
},
.slaves = omap2430_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO common */
@@ -1966,7 +1923,6 @@
.slaves = omap2430_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO2 */
@@ -2010,7 +1966,6 @@
.slaves = omap2430_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 25bf43b..ab35acb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -156,7 +156,6 @@
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters),
.slaves = omap3xxx_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -459,7 +458,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -474,7 +472,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -489,7 +486,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -505,7 +501,6 @@
.main_clk = "arm_fck",
.masters = omap3xxx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -533,7 +528,6 @@
.class = &iva_hwmod_class,
.masters = omap3xxx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer class */
@@ -613,7 +607,6 @@
.slaves = omap3xxx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer2 */
@@ -659,7 +652,6 @@
.slaves = omap3xxx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer3 */
@@ -705,7 +697,6 @@
.slaves = omap3xxx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer4 */
@@ -751,7 +742,6 @@
.slaves = omap3xxx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer5 */
@@ -797,7 +787,6 @@
.slaves = omap3xxx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer6 */
@@ -843,7 +832,6 @@
.slaves = omap3xxx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer7 */
@@ -889,7 +877,6 @@
.slaves = omap3xxx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer8 */
@@ -935,7 +922,6 @@
.slaves = omap3xxx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer9 */
@@ -981,7 +967,6 @@
.slaves = omap3xxx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer10 */
@@ -1018,7 +1003,6 @@
.slaves = omap3xxx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer11 */
@@ -1055,7 +1039,6 @@
.slaves = omap3xxx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer12*/
@@ -1105,7 +1088,6 @@
.slaves = omap3xxx_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* l4_wkup -> wd_timer2 */
@@ -1182,7 +1164,6 @@
},
.slaves = omap3xxx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
/*
* XXX: Use software supervised mode, HW supervised smartidle seems to
* block CORE power domain idle transitions. Maybe a HW bug in wdt2?
@@ -1213,7 +1194,6 @@
.slaves = omap3xxx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART2 */
@@ -1239,7 +1219,6 @@
.slaves = omap3xxx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART3 */
@@ -1265,7 +1244,6 @@
.slaves = omap3xxx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART4 */
@@ -1302,7 +1280,6 @@
.slaves = omap3xxx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static struct omap_hwmod_class i2c_class = {
@@ -1390,7 +1367,6 @@
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1415,8 +1391,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 |
- CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1),
};
/* l4_core -> dss_dispc */
@@ -1454,9 +1428,6 @@
},
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1518,9 +1489,6 @@
},
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1558,9 +1526,6 @@
},
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1599,9 +1564,6 @@
},
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1637,7 +1599,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C2 */
@@ -1672,7 +1633,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C3 */
@@ -1718,7 +1678,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
.class = &i2c_class,
.dev_attr = &i2c3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4_wkup -> gpio1 */
@@ -1880,7 +1839,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio2 */
@@ -1912,7 +1870,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio3 */
@@ -1944,7 +1901,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio4 */
@@ -1976,7 +1932,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio5 */
@@ -2013,7 +1968,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio6 */
@@ -2050,7 +2004,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* dma_system -> L3 */
@@ -2134,7 +2087,6 @@
.masters = omap3xxx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -2207,7 +2159,6 @@
},
.slaves = omap3xxx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp2 */
@@ -2264,7 +2215,6 @@
.slaves = omap3xxx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
.dev_attr = &omap34xx_mcbsp2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3 */
@@ -2321,7 +2271,6 @@
.slaves = omap3xxx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
.dev_attr = &omap34xx_mcbsp3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp4 */
@@ -2379,7 +2328,6 @@
},
.slaves = omap3xxx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp5 */
@@ -2437,7 +2385,6 @@
},
.slaves = omap3xxx_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* 'mcbsp sidetone' class */
@@ -2498,7 +2445,6 @@
},
.slaves = omap3xxx_mcbsp2_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3_sidetone */
@@ -2547,7 +2493,6 @@
},
.slaves = omap3xxx_mcbsp3_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -2609,9 +2554,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2631,7 +2573,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/* SR2 */
@@ -2655,9 +2596,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2677,7 +2615,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/*
@@ -2745,7 +2682,6 @@
},
.slaves = omap3xxx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4 core -> mcspi1 interface */
@@ -2843,7 +2779,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi2 */
@@ -2873,7 +2808,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi3 */
@@ -2916,7 +2850,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* SPI4 */
@@ -2957,7 +2890,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi4_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -3014,7 +2946,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* usb_otg_hs */
@@ -3042,7 +2973,6 @@
.slaves = am35xx_usbhsotg_slaves,
.slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves),
.class = &am35xx_usbotg_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1)
};
/* MMC/SD/SDIO common */
@@ -3108,7 +3038,6 @@
.slaves = omap3xxx_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO2 */
@@ -3151,7 +3080,6 @@
.slaves = omap3xxx_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO3 */
@@ -3193,7 +3121,6 @@
.slaves = omap3xxx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
@@ -3224,10 +3151,7 @@
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- &omap3xxx_uart4_hwmod,
/* dss class */
- &omap3430es1_dss_core_hwmod,
- &omap3xxx_dss_core_hwmod,
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
@@ -3239,9 +3163,6 @@
&omap3xxx_i2c3_hwmod,
&omap34xx_sr1_hwmod,
&omap34xx_sr2_hwmod,
- &omap36xx_sr1_hwmod,
- &omap36xx_sr2_hwmod,
-
/* gpio class */
&omap3xxx_gpio1_hwmod,
@@ -3272,16 +3193,96 @@
&omap34xx_mcspi3,
&omap34xx_mcspi4,
- /* usbotg class */
- &omap3xxx_usbhsotg_hwmod,
-
- /* usbotg for am35x */
- &am35xx_usbhsotg_hwmod,
-
NULL,
};
+/* 3430ES1-only hwmods */
+static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+ &omap3430es1_dss_core_hwmod,
+ NULL
+};
+
+/* 3430ES2+-only hwmods */
+static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+ &omap3xxx_dss_core_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+/* 34xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+ &omap34xx_sr1_hwmod,
+ &omap34xx_sr2_hwmod,
+ NULL
+};
+
+/* 36xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+ &omap3xxx_uart4_hwmod,
+ &omap3xxx_dss_core_hwmod,
+ &omap36xx_sr1_hwmod,
+ &omap36xx_sr2_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+static __initdata struct omap_hwmod *am35xx_hwmods[] = {
+ &omap3xxx_dss_core_hwmod, /* XXX ??? */
+ &am35xx_usbhsotg_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
- return omap_hwmod_register(omap3xxx_hwmods);
+ int r;
+ struct omap_hwmod **h = NULL;
+ unsigned int rev;
+
+ /* Register hwmods common to all OMAP3 */
+ r = omap_hwmod_register(omap3xxx_hwmods);
+ if (!r)
+ return r;
+
+ rev = omap_rev();
+
+ /*
+ * Register hwmods common to individual OMAP3 families, all
+ * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
+ * All possible revisions should be included in this conditional.
+ */
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
+ rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
+ h = omap34xx_hwmods;
+ } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
+ h = am35xx_hwmods;
+ } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_2) {
+ h = omap36xx_hwmods;
+ } else {
+ WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
+ return -EINVAL;
+ };
+
+ r = omap_hwmod_register(h);
+ if (!r)
+ return r;
+
+ /*
+ * Register hwmods specific to certain ES levels of a
+ * particular family of silicon (e.g., 34xx ES1.0)
+ */
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0) {
+ h = omap3430es1_hwmods;
+ } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430es2plus_hwmods;
+ };
+
+ if (h)
+ r = omap_hwmod_register(h);
+
+ return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 6201422..caaf409 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -133,7 +133,6 @@
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
.mpu_irqs = omap44xx_dmm_irqs,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -189,7 +188,6 @@
},
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -236,7 +234,6 @@
},
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_1 */
@@ -336,7 +333,6 @@
},
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_2 */
@@ -438,7 +434,6 @@
},
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_3 */
@@ -496,7 +491,6 @@
},
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -559,7 +553,6 @@
},
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_cfg */
@@ -588,7 +581,6 @@
},
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_per */
@@ -617,7 +609,6 @@
},
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_wkup */
@@ -646,7 +637,6 @@
},
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -677,7 +667,6 @@
.clkdm_name = "mpuss_clkdm",
.slaves = omap44xx_mpu_private_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -828,7 +817,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves),
.masters = omap44xx_aess_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_aess_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -856,7 +844,6 @@
},
.opt_clks = bandgap_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -917,7 +904,6 @@
},
.slaves = omap44xx_counter_32k_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1005,7 +991,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
.masters = omap44xx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1098,7 +1083,6 @@
},
.slaves = omap44xx_dmic_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1164,7 +1148,6 @@
.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1187,7 +1170,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves),
.masters = omap44xx_dsp_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1278,7 +1260,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves),
.masters = omap44xx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1381,7 +1362,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1480,7 +1460,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* dss_dsi2 */
@@ -1558,7 +1537,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1656,7 +1634,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1748,7 +1725,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1817,7 +1793,6 @@
},
.slaves = omap44xx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1901,7 +1876,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio2 */
@@ -1957,7 +1931,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio3 */
@@ -2013,7 +1986,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio4 */
@@ -2069,7 +2041,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio5 */
@@ -2125,7 +2096,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio6 */
@@ -2181,7 +2151,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2261,7 +2230,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves),
.masters = omap44xx_hsi_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2345,7 +2313,6 @@
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c2 */
@@ -2402,7 +2369,6 @@
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c3 */
@@ -2459,7 +2425,6 @@
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c4 */
@@ -2516,7 +2481,6 @@
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2577,7 +2541,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2593,7 +2556,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2616,7 +2578,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves),
.masters = omap44xx_ipu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2706,7 +2667,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves),
.masters = omap44xx_iss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2781,7 +2741,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2797,7 +2756,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_iva_hwmod = {
@@ -2820,7 +2778,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves),
.masters = omap44xx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2890,7 +2847,6 @@
},
.slaves = omap44xx_kbd_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2956,7 +2912,6 @@
},
.slaves = omap44xx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3051,7 +3006,6 @@
},
.slaves = omap44xx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp2 */
@@ -3127,7 +3081,6 @@
},
.slaves = omap44xx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp3 */
@@ -3203,7 +3156,6 @@
},
.slaves = omap44xx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp4 */
@@ -3258,7 +3210,6 @@
},
.slaves = omap44xx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3353,7 +3304,6 @@
},
.slaves = omap44xx_mcpdm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3442,7 +3392,6 @@
.dev_attr = &mcspi1_dev_attr,
.slaves = omap44xx_mcspi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi2 */
@@ -3505,7 +3454,6 @@
.dev_attr = &mcspi2_dev_attr,
.slaves = omap44xx_mcspi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi3 */
@@ -3568,7 +3516,6 @@
.dev_attr = &mcspi3_dev_attr,
.slaves = omap44xx_mcspi3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi4 */
@@ -3629,7 +3576,6 @@
.dev_attr = &mcspi4_dev_attr,
.slaves = omap44xx_mcspi4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3718,7 +3664,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves),
.masters = omap44xx_mmc1_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc2 */
@@ -3779,7 +3724,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves),
.masters = omap44xx_mmc2_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc3 */
@@ -3834,7 +3778,6 @@
},
.slaves = omap44xx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc4 */
@@ -3890,7 +3833,6 @@
},
.slaves = omap44xx_mmc4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc5 */
@@ -3945,7 +3887,6 @@
},
.slaves = omap44xx_mmc5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3987,7 +3928,6 @@
},
.masters = omap44xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4063,7 +4003,6 @@
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_iva */
@@ -4112,7 +4051,6 @@
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_mpu */
@@ -4161,7 +4099,6 @@
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4224,7 +4161,6 @@
},
.slaves = omap44xx_spinlock_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4310,7 +4246,6 @@
},
.slaves = omap44xx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer2 */
@@ -4358,7 +4293,6 @@
},
.slaves = omap44xx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer3 */
@@ -4406,7 +4340,6 @@
},
.slaves = omap44xx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer4 */
@@ -4454,7 +4387,6 @@
},
.slaves = omap44xx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer5 */
@@ -4521,7 +4453,6 @@
},
.slaves = omap44xx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer6 */
@@ -4589,7 +4520,6 @@
},
.slaves = omap44xx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer7 */
@@ -4656,7 +4586,6 @@
},
.slaves = omap44xx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer8 */
@@ -4723,7 +4652,6 @@
},
.slaves = omap44xx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer9 */
@@ -4771,7 +4699,6 @@
},
.slaves = omap44xx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer10 */
@@ -4819,7 +4746,6 @@
},
.slaves = omap44xx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer11 */
@@ -4867,7 +4793,6 @@
},
.slaves = omap44xx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4944,7 +4869,6 @@
},
.slaves = omap44xx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart2 */
@@ -4999,7 +4923,6 @@
},
.slaves = omap44xx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart3 */
@@ -5055,7 +4978,6 @@
},
.slaves = omap44xx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart4 */
@@ -5110,7 +5032,6 @@
},
.slaves = omap44xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5195,7 +5116,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
.masters = omap44xx_usb_otg_hs_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5266,7 +5186,6 @@
},
.slaves = omap44xx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* wd_timer3 */
@@ -5333,7 +5252,6 @@
},
.slaves = omap44xx_wd_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index ab8b35b..9262a6b 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -69,7 +69,7 @@
opp_def->hwmod_name, i);
return -EINVAL;
}
- dev = &oh->od->pdev.dev;
+ dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 472bf22..25b8c7f 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -60,19 +60,19 @@
static int _init_omap_device(char *name, struct device **new_dev)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
- od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
- if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+ pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+ if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
- *new_dev = &od->pdev.dev;
+ *new_dev = &pdev->dev;
return 0;
}
@@ -136,8 +136,8 @@
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
- printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
- pwrdm->name);
+ pr_err("%s: unable to set state of powerdomain: %s\n",
+ __func__, pwrdm->name);
goto err;
}
@@ -161,11 +161,11 @@
}
/*
- * This API is to be called during init to put the various voltage
+ * This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
- * opp entry and puts the voltage domain to the voltage specifies
+ * opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
@@ -177,21 +177,20 @@
unsigned long freq, bootup_volt;
if (!vdd_name || !clk_name || !dev) {
- printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+ pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
voltdm = omap_voltage_domain_lookup(vdd_name);
if (IS_ERR(voltdm)) {
- printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+ pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
- printk(KERN_ERR "%s: unable to get clk %s\n",
- __func__, clk_name);
+ pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
@@ -200,14 +199,14 @@
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
- printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+ pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
if (!bootup_volt) {
- printk(KERN_ERR "%s: unable to find voltage corresponding"
+ pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
goto exit;
}
@@ -216,8 +215,7 @@
return 0;
exit:
- printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
- __func__, vdd_name);
+ pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bf089e7..cf0c216 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,8 +53,6 @@
#include "powerdomain.h"
#include "clockdomain.h"
-static int omap2_pm_debug;
-
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
@@ -96,7 +94,6 @@
static void omap2_enter_full_retention(void)
{
u32 l;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* There is 1 reference hold for all children of the oscillator
* clock, the following will remove it. If no one else uses the
@@ -124,10 +121,6 @@
omap2_gpio_prepare_for_idle(0);
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
@@ -155,13 +148,6 @@
console_unlock();
no_sleep:
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
omap2_gpio_resume_after_idle();
clk_enable(osc_ck);
@@ -219,7 +205,6 @@
static void omap2_enter_mpu_retention(void)
{
int only_idle = 0;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
@@ -246,19 +231,7 @@
only_idle = 1;
}
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
omap2_sram_idle();
-
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
}
static int omap2_can_sleep(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9b..c8cbd00 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -55,7 +55,7 @@
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
- return (suspend_state != PM_SUSPEND_ON);
+ return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index 171fccd..f97afff 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -1,9 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/powerdomain-common.c
- * Contains common powerdomain framework functions
+ * Common powerdomain framework functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
*
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index ef71fdd..896cb4c 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1,7 +1,7 @@
/*
* OMAP powerdomain control
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Written by Paul Walmsley
@@ -81,9 +81,6 @@
if (!pwrdm || !pwrdm->name)
return -EINVAL;
- if (!omap_chip_is(pwrdm->omap_chip))
- return -EINVAL;
-
if (cpu_is_omap44xx() &&
pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
@@ -194,36 +191,76 @@
/* Public functions */
/**
- * pwrdm_init - set up the powerdomain layer
- * @pwrdms: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specific implementations
+ * pwrdm_register_platform_funcs - register powerdomain implementation fns
+ * @po: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdms, registering all
- * that are available on the current CPU. Also, program all
- * powerdomain target state as ON; this is to prevent domains from
- * hitting low power states (if bootloader has target states set to
- * something other than ON) and potentially even losing context while
- * PM is not fully initialized. The PM late init code can then program
- * the desired target state for all the power domains. No return
- * value.
+ * Register the list of function pointers used to implement the
+ * powerdomain functions on different OMAP SoCs. Should be called
+ * before any other pwrdm_register*() function. Returns -EINVAL if
+ * @po is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
+int pwrdm_register_platform_funcs(struct pwrdm_ops *po)
+{
+ if (!po)
+ return -EINVAL;
+
+ if (arch_pwrdm)
+ return -EEXIST;
+
+ arch_pwrdm = po;
+
+ return 0;
+}
+
+/**
+ * pwrdm_register_pwrdms - register SoC powerdomains
+ * @ps: pointer to an array of struct powerdomain to register
+ *
+ * Register the powerdomains available on a particular OMAP SoC. Must
+ * be called after pwrdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is
+ * null; or 0 upon success.
+ */
+int pwrdm_register_pwrdms(struct powerdomain **ps)
{
struct powerdomain **p = NULL;
+
+ if (!arch_pwrdm)
+ return -EEXIST;
+
+ if (!ps)
+ return -EINVAL;
+
+ for (p = ps; *p; p++)
+ _pwrdm_register(*p);
+
+ return 0;
+}
+
+/**
+ * pwrdm_complete_init - set up the powerdomain layer
+ *
+ * Do whatever is necessary to initialize registered powerdomains and
+ * powerdomain code. Currently, this programs the next power state
+ * for each powerdomain to ON. This prevents powerdomains from
+ * unexpectedly losing context or entering high wakeup latency modes
+ * with non-power-management-enabled kernels. Must be called after
+ * pwrdm_register_pwrdms(). Returns -EACCES if called before
+ * pwrdm_register_pwrdms(), or 0 upon success.
+ */
+int pwrdm_complete_init(void)
+{
struct powerdomain *temp_p;
- if (!custom_funcs)
- WARN(1, "powerdomain: No custom pwrdm functions registered\n");
- else
- arch_pwrdm = custom_funcs;
-
- if (pwrdms) {
- for (p = pwrdms; *p; p++)
- _pwrdm_register(*p);
- }
+ if (list_empty(&pwrdm_list))
+ return -EACCES;
list_for_each_entry(temp_p, &pwrdm_list, node)
pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
+
+ return 0;
}
/**
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index d23d979..8febd84 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -78,7 +78,6 @@
/**
* struct powerdomain - OMAP powerdomain
* @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
* @prcm_offs: the address offset from CM_BASE/PRM_BASE
* @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
* @pwrsts: Possible powerdomain power states
@@ -98,7 +97,6 @@
*/
struct powerdomain {
const char *name;
- const struct omap_chip_id omap_chip;
const s16 prcm_offs;
const u8 pwrsts;
const u8 pwrsts_logic_ret;
@@ -162,7 +160,9 @@
int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
};
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
+int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
+int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
+int pwrdm_complete_init(void);
struct powerdomain *pwrdm_lookup(const char *name);
@@ -210,7 +210,8 @@
u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-extern void omap2xxx_powerdomains_init(void);
+extern void omap242x_powerdomains_init(void);
+extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 4210c33..bf30483 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 common powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -12,20 +12,6 @@
*/
/*
- * To Do List
- * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
- * Clock Domain Framework
- */
-
-/*
- * This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34xx chips.
- *
- * This is not an exhaustive listing of powerdomains on the chips; only
- * powerdomains that can be controlled in software.
- */
-
-/*
* The names for the DSP/IVA2 powerdomains are confusing.
*
* Most OMAP chips have an on-board DSP.
@@ -59,8 +45,6 @@
struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -75,6 +59,5 @@
struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_ON,
};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index cc389fb..bb4394e 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2XXX powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -28,7 +28,6 @@
static struct powerdomain dsp_pwrdm = {
.name = "dsp_pwrdm",
.prcm_offs = OMAP24XX_DSP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -43,7 +42,6 @@
static struct powerdomain mpu_24xx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -58,7 +56,6 @@
static struct powerdomain core_24xx_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.banks = 3,
.pwrsts_mem_ret = {
@@ -78,14 +75,11 @@
* 2430-specific powerdomains
*/
-#ifdef CONFIG_SOC_OMAP2430
-
/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
static struct powerdomain mdm_pwrdm = {
.name = "mdm_pwrdm",
.prcm_offs = OMAP2430_MDM_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -97,27 +91,41 @@
},
};
-#endif /* CONFIG_SOC_OMAP2430 */
+/*
+ *
+ */
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap24xx[] __initdata = {
&wkup_omap2_pwrdm,
&gfx_omap2_pwrdm,
-
-#ifdef CONFIG_ARCH_OMAP2
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mdm_pwrdm,
-#endif
NULL
};
-void __init omap2xxx_powerdomains_init(void)
+static struct powerdomain *powerdomains_omap2430[] __initdata = {
+ &mdm_pwrdm,
+ NULL
+};
+
+void __init omap242x_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations);
+ if (!cpu_is_omap2420())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_complete_init();
+}
+
+void __init omap243x_powerdomains_init(void)
+{
+ if (!cpu_is_omap2430())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_register_pwrdms(powerdomains_omap2430);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..e4f3a7d 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP3 powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <plat/cpu.h>
+
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
@@ -27,8 +29,6 @@
* 34XX-specific powerdomains, dependencies
*/
-#ifdef CONFIG_ARCH_OMAP3
-
/*
* Powerdomains
*/
@@ -36,7 +36,6 @@
static struct powerdomain iva2_pwrdm = {
.name = "iva2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 4,
@@ -57,7 +56,6 @@
static struct powerdomain mpu_3xxx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_MPU_QUIRK,
@@ -83,10 +81,6 @@
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3630ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -103,8 +97,6 @@
static struct powerdomain core_3xxx_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
- CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
/*
@@ -125,7 +117,6 @@
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -146,7 +137,6 @@
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -161,7 +151,6 @@
static struct powerdomain cam_pwrdm = {
.name = "cam_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -177,7 +166,6 @@
static struct powerdomain per_pwrdm = {
.name = "per_pwrdm",
.prcm_offs = OMAP3430_PER_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -192,13 +180,11 @@
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static struct powerdomain neon_pwrdm = {
.name = "neon_pwrdm",
.prcm_offs = OMAP3430_NEON_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
};
@@ -206,7 +192,6 @@
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
/*
@@ -228,60 +213,92 @@
static struct powerdomain dpll1_pwrdm = {
.name = "dpll1_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static struct powerdomain dpll2_pwrdm = {
.name = "dpll2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static struct powerdomain dpll3_pwrdm = {
.name = "dpll3_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static struct powerdomain dpll4_pwrdm = {
.name = "dpll4_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap3430_common[] __initdata = {
&wkup_omap2_pwrdm,
- &gfx_omap2_pwrdm,
&iva2_pwrdm,
&mpu_3xxx_pwrdm,
&neon_pwrdm,
- &core_3xxx_pre_es3_1_pwrdm,
- &core_3xxx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
- &sgx_pwrdm,
- &usbhost_pwrdm,
&dpll1_pwrdm,
&dpll2_pwrdm,
&dpll3_pwrdm,
&dpll4_pwrdm,
- &dpll5_pwrdm,
-#endif
NULL
};
+static struct powerdomain *powerdomains_omap3430es1[] __initdata = {
+ &gfx_omap2_pwrdm,
+ &core_3xxx_pre_es3_1_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.0 */
+static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = {
+ &core_3xxx_pre_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.1+ */
+static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
+ &core_3xxx_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
void __init omap3xxx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+ unsigned int rev;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap3430_common);
+
+ rev = omap_rev();
+
+ if (rev == OMAP3430_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es1);
+ else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
+ else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
+ rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
+ pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
+ else
+ WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 247e794..cbce0c9 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -35,7 +35,6 @@
.name = "core_pwrdm",
.prcm_offs = OMAP4430_PRM_CORE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 5,
@@ -61,7 +60,6 @@
.name = "gfx_pwrdm",
.prcm_offs = OMAP4430_PRM_GFX_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -78,7 +76,6 @@
.name = "abe_pwrdm",
.prcm_offs = OMAP4430_PRM_ABE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
@@ -98,7 +95,6 @@
.name = "dss_pwrdm",
.prcm_offs = OMAP4430_PRM_DSS_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
@@ -116,7 +112,6 @@
.name = "tesla_pwrdm",
.prcm_offs = OMAP4430_PRM_TESLA_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -138,7 +133,6 @@
.name = "wkup_pwrdm",
.prcm_offs = OMAP4430_PRM_WKUP_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -154,7 +148,6 @@
.name = "cpu0_pwrdm",
.prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -171,7 +164,6 @@
.name = "cpu1_pwrdm",
.prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -188,7 +180,6 @@
.name = "emu_pwrdm",
.prcm_offs = OMAP4430_PRM_EMU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -204,7 +195,6 @@
.name = "mpu_pwrdm",
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -225,7 +215,6 @@
.name = "ivahd_pwrdm",
.prcm_offs = OMAP4430_PRM_IVAHD_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
@@ -249,7 +238,6 @@
.name = "cam_pwrdm",
.prcm_offs = OMAP4430_PRM_CAM_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -266,7 +254,6 @@
.name = "l3init_pwrdm",
.prcm_offs = OMAP4430_PRM_L3INIT_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -284,7 +271,6 @@
.name = "l4per_pwrdm",
.prcm_offs = OMAP4430_PRM_L4PER_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -307,7 +293,6 @@
.name = "always_on_core_pwrdm",
.prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
};
@@ -316,7 +301,6 @@
.name = "cefuse_pwrdm",
.prcm_offs = OMAP4430_PRM_CEFUSE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
@@ -352,5 +336,7 @@
void __init omap44xx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations);
+ pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap44xx);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 466fc722..3d1c1d3 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -711,7 +711,7 @@
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
@@ -799,20 +799,20 @@
if (WARN_ON(!oh))
return;
- od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+ pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
omap_uart_latency,
ARRAY_SIZE(omap_uart_latency), false);
- WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
- uart->pdev = &od->pdev;
+ uart->pdev = pdev;
oh->dev_attr = uart;
@@ -846,8 +846,8 @@
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(&od->pdev.dev, true);
- DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
+ device_init_wakeup(&pdev->dev, true);
+ DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 10d3c5e..624264d 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -80,7 +80,7 @@
static int sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_volt_data *volt_data;
char *name = "smartreflex";
static int i;
@@ -120,10 +120,10 @@
sr_data->enable_on_init = sr_enable_on_init;
- od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+ pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
omap_sr_latency,
ARRAY_SIZE(omap_sr_latency), 0);
- if (IS_ERR(od))
+ if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
exit:
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@
#ifdef CONFIG_MACH_D2NET
MACHINE_START(D2NET, "LaCie d2 Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -348,7 +348,7 @@
#ifdef CONFIG_MACH_BIGDISK
MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index a3e3e9e..88432ab 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -359,7 +359,7 @@
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index c105556..9e5c166 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -730,7 +730,7 @@
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(DNS323, "D-Link DNS-323")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
/* Maintainer: Christopher Moore <moore@free.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = edmini_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 0038124..9115511 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -380,7 +380,7 @@
#ifdef CONFIG_MACH_KUROBOX_PRO
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -393,7 +393,7 @@
#ifdef CONFIG_MACH_LINKSTATION_PRO
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@
MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@
#ifdef CONFIG_MACH_LINKSTATION_MINI
MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lsmini_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index ef3bb8e..6020e26 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@
MACHINE_START(MSS2, "Maxtor Shared Storage II")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mss2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 63ff10c..b3356ad 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -229,7 +229,7 @@
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(MV2120, "HP Media Vault mv2120")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 291d22b..8c87666 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -169,7 +169,7 @@
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 3f02362..994644f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -181,7 +181,7 @@
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 27fd38e..1903d25 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -306,7 +306,7 @@
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..e06fdae 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -122,7 +122,7 @@
MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index a34e4fa..3061832 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -358,7 +358,7 @@
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = tsp2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c983161..3dbcd5e 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -323,7 +323,7 @@
MACHINE_START(TS209, "QNAP TS-109/TS-209")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts209_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cc33b22..23c9e2e 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -312,7 +312,7 @@
MACHINE_START(TS409, "QNAP TS-409")
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts409_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 2653595..1c63a76 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -173,7 +173,7 @@
MACHINE_START(WNR854T, "Netgear WNR854T")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wnr854t_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 251ef15..4fd9f18 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -261,7 +261,7 @@
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 6339975..cdb95e7 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@
MACHINE_START(PNX4008, "Philips PNX4008")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = pnx4008_map_io,
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
index 615a4e7..aebad7e 100644
--- a/arch/arm/mach-prima2/clock.c
+++ b/arch/arm/mach-prima2/clock.c
@@ -350,10 +350,10 @@
.clk = &clk_mem,
}, {
.dev_id = "sys",
- .clk = &clk_sys,
+ .clk = &clk_sys,
}, {
.dev_id = "io",
- .clk = &clk_io,
+ .clk = &clk_io,
},
};
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index f57124b..a3918d9 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -1,5 +1,5 @@
/*
- * Defines machines for CSR SiRFprimaII
+ * Defines machines for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
@@ -31,7 +31,7 @@
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index ed7ec48..26ab6fe 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -133,14 +133,14 @@
/* Overwrite weak default sched_clock with more precise one */
unsigned long long notrace sched_clock(void)
{
- static int is_mapped = 0;
+ static int is_mapped;
/*
* sched_clock is called earlier than .init of sys_timer
* if we map timer memory in .init of sys_timer, system
* will panic due to illegal memory access
*/
- if(!is_mapped) {
+ if (!is_mapped) {
sirfsoc_of_timer_map();
is_mapped = 1;
}
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index ef3e8b1..7765d67 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -828,5 +828,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 648b0ab..4efc16d 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 13cf518..349896c 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -513,7 +513,7 @@
#endif
MACHINE_START(ARMCORE, "Compulab CM-X2XX")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = cmx2xx_map_io,
.nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b6a5134..9ac0225 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -852,7 +852,7 @@
}
MACHINE_START(CM_X300, "CM-X300 module")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 8709209..7db6646 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
@@ -315,7 +315,7 @@
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_income_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 60a6781..c825e8b 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa300_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d2c6631..692e1ff 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -253,7 +253,7 @@
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fe812ea..5e2cf39 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,7 +272,7 @@
}
MACHINE_START(CSB726, "Cogent CSB726")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2e37ea5..94acc0b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@
}
MACHINE_START(EM_X270, "Compulab EM-X270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
@@ -1308,7 +1308,7 @@
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b4599ec..e823c54 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -189,7 +189,7 @@
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -239,7 +239,7 @@
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -362,7 +362,7 @@
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -551,7 +551,7 @@
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -743,7 +743,7 @@
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -948,7 +948,7 @@
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index b73eadb..8308eee 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -863,7 +863,7 @@
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -929,7 +929,7 @@
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1120,7 +1120,7 @@
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1186,7 +1186,7 @@
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1226,7 +1226,7 @@
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index deaa111..9c8208c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@
}
MACHINE_START(GUMSTIX, "Gumstix")
- .boot_params = 0xa0000100, /* match u-boot bi_boot_params */
+ .atag_offset = 0x100, /* match u-boot bi_boot_params */
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0a23512..4b5e110 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -203,7 +203,7 @@
}
MACHINE_START(H5400, "HP iPAQ H5000")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index a997d0ab..f2c3245 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -158,7 +158,7 @@
MACHINE_START(HIMALAYA, "HTC Himalaya")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index c748a47..6f6368e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -838,7 +838,7 @@
}
MACHINE_START(H4700, "HP iPAQ HX4700")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d427429..f78d5db 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@
}
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8f97e15..0037e57 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c171d6e..16df0fc 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -499,7 +499,7 @@
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
/* Maintainer: Peter Barada */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = lpd270_map_io,
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5fe5bcd..4b796c3 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -753,7 +753,7 @@
MACHINE_START(MAGICIAN, "HTC Magician")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 4622eb7..cc6e14f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -616,7 +616,7 @@
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0xa0000100, /* BLOB boot parameter setting */
+ .atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 64810f9..b938fc2 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -751,7 +751,7 @@
}
MACHINE_START(MIOA701, "MIO A701")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index fb408861..4af5d51 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@
/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
MACHINE_START(NEC_MP900, "MobilePro900/C")
- .boot_params = 0xa0220100,
+ .atag_offset = 0x220100,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 6b77365..3d4a281 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@
}
MACHINE_START(PALMLD, "Palm LifeDrive")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmld_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9bd3e47..99d6bcf 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ad4a6c..6ec7cae 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -537,7 +537,7 @@
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 664232f..9376da0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@
}
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index bb27d4b..7346fbf 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -440,7 +440,7 @@
}
MACHINE_START(TREO680, "Palm Treo 680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
@@ -450,7 +450,7 @@
MACHINE_END
MACHINE_START(CENTRO, "Palm Centro 685")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fc42855..2b9e76f 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -364,7 +364,7 @@
}
MACHINE_START(PALMTX, "Palm T|X")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index e61c1cc..68e18ba 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -399,7 +399,7 @@
}
MACHINE_START(PALMZ72, "Palm Zire72")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ffa65df..0b825a3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@
MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
/* Maintainer: Pengutronix */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pcm027_map_io,
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index bbcd905..6810cdd 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1086,7 +1086,7 @@
#ifdef CONFIG_MACH_RAUMFELD_RC
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_controller_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@
#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_connector_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1108,7 +1108,7 @@
#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_speaker_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index df4356e..602d70b 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index ebd6379..5ce3403 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -103,7 +103,7 @@
}
MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = SAARB_NR_IRQS,
.init_irq = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3f8d0af..4c9a48b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1004,7 +1004,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
@@ -1016,6 +1016,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 32fb58e..ad47bb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd5a8ea..fd56916 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@
}
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index c041750..35bbf13 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
@@ -564,7 +564,7 @@
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d4a3dc7..242ddae 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@
MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 5f8490a..a7539a6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@
}
MACHINE_START(VPAC270, "Voipac PXA270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index acc600f..54930cc 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -180,7 +180,7 @@
}
MACHINE_START(XCEP, "Iskratel XCEP")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = xcep_init,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 6c9275a..65fed37 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -718,7 +718,7 @@
}
MACHINE_START(ZIPIT2, "Zipit Z2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 99c49bc..c424e7d 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,7 +904,7 @@
MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = zeus_map_io,
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 15ec66b..31d4968 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..026c66a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..7263dea 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -358,7 +358,7 @@
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..671ad6d 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..cbf22df 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 363b0ab..8ec7e52 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 580b3c7..a9241eb 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,7 +218,7 @@
MACHINE_START(RISCPC, "Acorn-RiscPC")
/* Maintainer: Russell King */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.reserve_lp0 = 1,
.reserve_lp1 = 1,
.map_io = rpc_map_io,
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7245a55..3700cf3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -8,7 +8,6 @@
select CPU_ARM920T
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
- select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
@@ -28,11 +27,6 @@
help
Power Management code common to S3C2410 and better
-config S3C2410_GPIO
- bool
- help
- GPIO code for S3C2410 and similar processors
-
config SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 8169535..782fd81 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -13,7 +13,6 @@
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO) += gpio.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 0d8e043..dbe43df 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -47,38 +47,26 @@
.channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -90,12 +78,10 @@
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
deleted file mode 100644
index 9664e01..0000000
--- a/arch/arm/mach-s3c2410/gpio.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C24XX_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
- return -EINVAL;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG(8);
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C24XX_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C24XX_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 425552d..4cf495f 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -14,9 +14,53 @@
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
-#include <plat/map.h>
-#define S3C2410_ADDR(x) S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_PA_EBI (0x48800000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
/* physical addresses of all the chip-select areas */
@@ -100,12 +142,10 @@
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_UART S3C2410_PA_UART
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141..7983894 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@
}
MACHINE_START(AML_M5900, "AML_M5900")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536..a20ae1a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa06..556c535 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa..1dc3e32 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@
/* Maintainer: Christer Weinigel <christer@weinigel.se>,
Ben Dooks <ben-linux@fluff.org>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
@@ -596,7 +596,7 @@
MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd..f03f3fd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@
MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index f44f775..367d376 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -344,7 +344,7 @@
}
MACHINE_START(QT2410, "QT2410")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f033..99c9dfd 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
* to SMDK2410 */
/* Maintainer: Jonas Dietsche */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b83..e0d0b6f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@
}
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a..df47e8e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@
MACHINE_START(VR1000, "Thorcom-VR1000")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2cf4e5..b8b9029 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -9,7 +9,6 @@
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
- select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 6c48a91..7e4d95f 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
-obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 7abecfc..c61e326 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -50,64 +50,46 @@
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
.channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
- .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 3404a87..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5eeb475..286ef17 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -655,7 +655,7 @@
MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 834cfb6..d6325ed 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -128,7 +128,7 @@
MACHINE_START(S3C2413, "S3C2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2412, "SMDK2412")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -150,7 +150,7 @@
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 83544eb..5955c15 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -156,7 +156,7 @@
}
MACHINE_START(VSTMS, "VSTMS")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = vstms_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb..a9eee53 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@
MACHINE_START(SMDK2416, "SMDK2416")
/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 50825a3..c461fb8 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -8,7 +8,6 @@
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
- select S3C2410_GPIO
select S3C2440_DMA if S3C2410_DMA
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
@@ -20,7 +19,6 @@
select CPU_ARM920T
select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
- select S3C2410_GPIO
select S3C2410_PM if PM
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 3b0529f..0e73f8f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -48,38 +48,26 @@
.channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -91,31 +79,26 @@
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
.channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d708678..74f92fc 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@
MACHINE_START(ANUBIS, "Simtec-Anubis")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b78..38887ee 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@
MACHINE_START(AT2440EVB, "AT2440EVB")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index c10ddf4..de1e0ff 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -595,7 +595,7 @@
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index fc2dc0b..91fe0b4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@
MACHINE_START(MINI2440, "MINI2440")
/* Maintainer: Michel Pollet <buserror@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306..61c0bf1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@
MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d885363..dc142eb 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea950..684dbb3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@
MACHINE_START(RX1950, "HP iPAQ RX1950")
/* Maintainers: Vasily Khoruzhick */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a..e19499c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f..36eeb41 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@
MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 3f65868..fe52151 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -54,68 +54,46 @@
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2443_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_0),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3_SRC2] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_1),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -124,27 +102,22 @@
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2443_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2443_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels = MAP(S3C2443_DMAREQSEL_PCMIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels = MAP(S3C2443_DMAREQSEL_PCMOUT),
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels = MAP(S3C2443_DMAREQSEL_MICIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
};
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e..bec107e 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2443, "SMDK2443")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2443_map_io,
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e..8dc0576 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -145,6 +146,7 @@
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
idcode = __raw_readl(S3C_VA_SYS + 0x118);
if (!idcode) {
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index a1f13f0..23a1d71 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -16,6 +16,7 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s3c.h>
/*
* Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -94,16 +94,10 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
index 4760cda..b704669 100644
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ b/arch/arm/mach-s3c64xx/include/mach/memory.h
@@ -15,6 +15,4 @@
#define PLAT_PHYS_OFFSET UL(0x50000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
-
#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb88643..d164a28 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe..8065803 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -329,9 +329,6 @@
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_timer[0],
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
@@ -766,7 +763,7 @@
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc..19a0887 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49b..fb8969a 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -205,12 +205,6 @@
.dev.platform_data = &mini6410_lcd_power_data,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static struct platform_device *mini6410_devices[] __initdata = {
&mini6410_device_eth,
&s3c_device_hsmmc0,
@@ -319,7 +313,7 @@
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
@@ -349,7 +343,7 @@
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857..c30f2e5 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1..93170d4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -198,12 +198,6 @@
&s3c_device_ohci,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static void __init real6410_map_io(void)
{
u32 tmp;
@@ -300,7 +294,7 @@
s3c_fb_set_platdata(&real6410_lcd_pdata);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
@@ -329,7 +323,7 @@
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8df..cbb57de 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 5796397..04f914b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642..6fd5e95 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index a9f3183..5f147c3 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -619,12 +619,6 @@
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
.no = S3C64XX_GPF(15),
@@ -666,7 +660,7 @@
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
@@ -703,7 +697,7 @@
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c0095..8a93854 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -111,6 +112,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
void __init s5p6450_map_io(void)
@@ -120,6 +122,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
/*
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
index 365a6eb..b14cbc3 100644
--- a/arch/arm/mach-s5p64x0/include/mach/memory.h
+++ b/arch/arm/mach-s5p64x0/include/mach/memory.h
@@ -14,6 +14,5 @@
#define __ASM_ARCH_MEMORY_H __FILE__
#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8df..88857f5 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -129,12 +129,6 @@
/* To be populated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
.no = S5P6440_GPF(15),
@@ -155,7 +149,7 @@
static void __init smdk6440_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
@@ -171,7 +165,7 @@
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf..e1b277b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -148,12 +148,6 @@
{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
.no = S5P6450_GPF(15),
@@ -174,7 +168,7 @@
static void __init smdk6450_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
@@ -190,7 +184,7 @@
MACHINE_START(SMDK6450, "SMDK6450")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d890..26f5c91 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -203,12 +203,6 @@
&s5pc100_device_spdif,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
.no = S5PC100_GPD(0),
@@ -228,7 +222,7 @@
static void __init smdkc100_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* I2C */
s3c_i2c0_set_platdata(NULL);
@@ -254,7 +248,7 @@
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 69dd87c..aaeb44a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,7 +14,6 @@
select S3C_PL330_DMA
select S5P_EXT_INT
select S5P_HRT
- select S5PV210_PM if PM
help
Enable S5PV210 CPU support
@@ -169,9 +168,4 @@
endmenu
-config S5PV210_PM
- bool
- help
- Power Management code common to S5PV210
-
endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 599a3c0..ef7e466 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
-obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# machine support
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec..9114572 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -20,6 +20,7 @@
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -119,6 +120,7 @@
void __init s5pv210_map_io(void)
{
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+ init_consistent_dma_size(14 << 20);
/* initialise device information early */
s5pv210_default_sdhci0();
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 7b5fcf0..2d3cfa2 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -14,7 +14,6 @@
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
* Sparsemem support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 509627f..5811a96 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@
/* Maintainers:
Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51..061cc7e 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -897,7 +897,7 @@
MACHINE_START(GONI, "GONI")
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8..f7266bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@
MACHINE_START(SMDKC110, "SMDKC110")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc..a9106c3 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -265,12 +265,6 @@
/* To Be Updated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
.no = S5PV210_GPD0(3),
@@ -296,7 +290,7 @@
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
@@ -319,7 +313,7 @@
MACHINE_START(SMDKV210, "SMDKV210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0d..97cc066 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@
MACHINE_START(TORBRECK, "TORBRECK")
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..d40da5f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,7 +447,7 @@
MACHINE_START(ASSABET, "Intel-Assabet")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
.init_irq = sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..bda83e1 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@
}
MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = badge4_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376..b30733a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3100_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a..6fd324d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3600_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..30f4a55 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@
*/
MACHINE_START(HACKKIT, "HackKit Cpu Board")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = hackkit_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066..0bb520d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@
MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = jornada720_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..5bc59d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@
}
MACHINE_START(LART, "LART")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = lart_map_io,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0..032f388 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@
}
MACHINE_START(NANOENGINE, "BSE nanoEngine")
- .boot_params = 0xc0000000,
+ .atag_offset = 0x100,
.map_io = nanoengine_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b24..1cccbf5 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@
}
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = shannon_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cfb7607..a1c2427 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -229,7 +229,7 @@
MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..feda3ca 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,7 +152,7 @@
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
- .boot_params = 0x08003000,
+ .atag_offset = 0x3000,
.map_io = shark_map_io,
.init_irq = shark_init_irq,
.timer = &shark_timer,
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cdfdd62..5fde49d 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -37,6 +37,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@@ -447,6 +448,8 @@
static void __init ag5evm_map_io(void)
{
iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh73a0_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 523f608..b622d8d 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -42,6 +42,7 @@
#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/dma-mapping.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
@@ -1170,6 +1171,8 @@
static void __init ap4evb_map_io(void)
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index ef4613b..8b620bf 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7367.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -260,6 +261,8 @@
static void __init g3evm_map_io(void)
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 8e3c555..7719ddc 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -33,6 +33,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7377.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -274,6 +275,8 @@
static void __init g4evm_map_io(void)
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 17c19dc..de2253d 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -45,6 +45,7 @@
#include <linux/tca6416_keypad.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
@@ -1381,6 +1382,8 @@
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index ad00c3c..0ffbe81 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,7 +4,4 @@
#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
-/* DMA memory at 0xf6000000 - 0xffdfffff */
-#define CONSISTENT_DMA_SIZE (158 << 20)
-
#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f6..a5ff98e 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@
}
MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce..45d180d 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@
}
MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353..2287984 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@
}
MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe..8238fe3 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@
}
MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
.timer = &spear6xx_timer,
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2d..777a5bb 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = tcc8k_map_io,
.init_irq = tcc8k_init_irq,
.init_machine = tcc8k_init,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 846cd7d..a4d1980 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -179,7 +179,7 @@
}
MACHINE_START(HARMONY, "harmony")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_harmony_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index ea2f79c..3197c4c 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -127,7 +127,7 @@
}
MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_paz00_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 56cbabf..9e98ac7 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -201,7 +201,7 @@
MACHINE_START(SEABOARD, "seaboard")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -210,7 +210,7 @@
MACHINE_END
MACHINE_START(KAEN, "kaen")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -219,7 +219,7 @@
MACHINE_END
MACHINE_START(WARIO, "wario")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 89a6d2a..8489aa8 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -171,7 +171,7 @@
}
MACHINE_START(TRIMSLICE, "trimslice")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_trimslice_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index d5e3f89..690b888 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -61,7 +61,7 @@
{ NULL, NULL, 0, 0},
};
-void __init tegra_init_cache(void)
+static void __init tegra_init_cache(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 0e1016a..b2647ec 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -57,12 +57,12 @@
static DEFINE_MUTEX(tegra_cpu_lock);
static bool is_suspended;
-int tegra_verify_speed(struct cpufreq_policy *policy)
+static int tegra_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, freq_table);
}
-unsigned int tegra_getspeed(unsigned int cpu)
+static unsigned int tegra_getspeed(unsigned int cpu)
{
unsigned long rate;
@@ -130,7 +130,7 @@
unsigned int target_freq,
unsigned int relation)
{
- int idx;
+ unsigned int idx;
unsigned int freq;
int ret = 0;
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..489e82b 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -29,7 +29,9 @@
#include <mach/iomap.h>
#include <mach/dma.h>
#include <mach/usb_phy.h>
+
#include "gpio-names.h"
+#include "devices.h"
static struct resource i2c_resource1[] = {
[0] = {
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index f4ef5eb..c0cf967 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -105,13 +105,17 @@
#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-const unsigned int ahb_addr_wrap_table[8] = {
+static const unsigned int ahb_addr_wrap_table[8] = {
0, 32, 64, 128, 256, 512, 1024, 2048
};
-const unsigned int apb_addr_wrap_table[8] = {0, 1, 2, 4, 8, 16, 32, 64};
+static const unsigned int apb_addr_wrap_table[8] = {
+ 0, 1, 2, 4, 8, 16, 32, 64
+};
-const unsigned int bus_width_table[5] = {8, 16, 32, 64, 128};
+static const unsigned int bus_width_table[5] = {
+ 8, 16, 32, 64, 128
+};
#define TEGRA_DMA_NAME_SIZE 16
struct tegra_dma_channel {
@@ -157,7 +161,7 @@
return;
}
-void tegra_dma_stop(struct tegra_dma_channel *ch)
+static void tegra_dma_stop(struct tegra_dma_channel *ch)
{
u32 csr;
u32 status;
@@ -174,7 +178,7 @@
writel(status, ch->addr + APB_DMA_CHAN_STA);
}
-int tegra_dma_cancel(struct tegra_dma_channel *ch)
+static int tegra_dma_cancel(struct tegra_dma_channel *ch)
{
u32 csr;
unsigned long irq_flags;
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index 4cea223..35a011f 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -33,20 +33,26 @@
*
*/
+#ifdef __ASSEMBLY__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
#define IO_IRAM_PHYS 0x40000000
-#define IO_IRAM_VIRT 0xFE400000
+#define IO_IRAM_VIRT IOMEM(0xFE400000)
#define IO_IRAM_SIZE SZ_256K
#define IO_CPU_PHYS 0x50040000
-#define IO_CPU_VIRT 0xFE000000
+#define IO_CPU_VIRT IOMEM(0xFE000000)
#define IO_CPU_SIZE SZ_16K
#define IO_PPSB_PHYS 0x60000000
-#define IO_PPSB_VIRT 0xFE200000
+#define IO_PPSB_VIRT IOMEM(0xFE200000)
#define IO_PPSB_SIZE SZ_1M
#define IO_APB_PHYS 0x70000000
-#define IO_APB_VIRT 0xFE300000
+#define IO_APB_VIRT IOMEM(0xFE300000)
#define IO_APB_SIZE SZ_1M
#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
@@ -61,7 +67,7 @@
IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \
IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \
IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \
- 0)
+ NULL)
#ifndef __ASSEMBLER__
@@ -71,7 +77,7 @@
void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
void tegra_iounmap(volatile void __iomem *addr);
-#define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n))
+#define IO_ADDRESS(n) (IO_TO_VIRT(n))
#ifdef CONFIG_TEGRA_PCI
extern void __iomem *tegra_pcie_io_base;
diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h
index 401d1b7..39c396d 100644
--- a/arch/arm/mach-tegra/include/mach/powergate.h
+++ b/arch/arm/mach-tegra/include/mach/powergate.h
@@ -31,7 +31,6 @@
int tegra_powergate_power_on(int id);
int tegra_powergate_power_off(int id);
-bool tegra_powergate_is_powered(int id);
int tegra_powergate_remove_clamping(int id);
/* Must be called with clk disabled, and returns with clk enabled */
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index ea50fe2..5489f8b 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -31,25 +31,25 @@
static struct map_desc tegra_io_desc[] __initdata = {
{
- .virtual = IO_PPSB_VIRT,
+ .virtual = (unsigned long)IO_PPSB_VIRT,
.pfn = __phys_to_pfn(IO_PPSB_PHYS),
.length = IO_PPSB_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_APB_VIRT,
+ .virtual = (unsigned long)IO_APB_VIRT,
.pfn = __phys_to_pfn(IO_APB_PHYS),
.length = IO_APB_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_CPU_VIRT,
+ .virtual = (unsigned long)IO_CPU_VIRT,
.pfn = __phys_to_pfn(IO_CPU_PHYS),
.length = IO_CPU_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_IRAM_VIRT,
+ .virtual = (unsigned long)IO_IRAM_VIRT,
.pfn = __phys_to_pfn(IO_IRAM_PHYS),
.length = IO_IRAM_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index f1f699d..f5aa173 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -41,6 +41,8 @@
#include <mach/clk.h>
#include <mach/powergate.h>
+#include "board.h"
+
/* register definitions */
#define AFI_OFFSET 0x3800
#define PADS_OFFSET 0x3000
@@ -150,9 +152,9 @@
static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
/*
* Tegra2 defines 1GB in the AXI address map for PCIe.
@@ -460,7 +462,7 @@
struct tegra_pcie_port *pp;
if (nr >= tegra_pcie.num_ports)
- return 0;
+ return NULL;
pp = tegra_pcie.port + nr;
pp->root_bus_nr = sys->busnr;
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 3cee9aa..9483064 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -89,12 +89,11 @@
return tegra_powergate_set(id, false);
}
-bool tegra_powergate_is_powered(int id)
+static bool tegra_powergate_is_powered(int id)
{
u32 status;
- if (id < 0 || id >= TEGRA_NUM_POWERGATE)
- return -EINVAL;
+ WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE);
status = pmc_read(PWRGATE_STATUS) & (1 << id);
return !!status;
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 0fe9b3e..371869d 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -166,13 +166,13 @@
static int tegra_periph_clk_enable_refcount[3 * 32];
#define clk_writel(value, reg) \
- __raw_writel(value, (u32)reg_clk_base + (reg))
+ __raw_writel(value, reg_clk_base + (reg))
#define clk_readl(reg) \
- __raw_readl((u32)reg_clk_base + (reg))
+ __raw_readl(reg_clk_base + (reg))
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
unsigned long clk_measure_input_freq(void)
{
@@ -918,7 +918,7 @@
static void tegra2_periph_clk_init(struct clk *c)
{
u32 val = clk_readl(c->reg);
- const struct clk_mux_sel *mux = 0;
+ const struct clk_mux_sel *mux = NULL;
const struct clk_mux_sel *sel;
if (c->flags & MUX) {
for (sel = c->inputs; sel->input != NULL; sel++) {
@@ -1459,7 +1459,7 @@
static struct clk_mux_sel tegra_clk_m_sel[] = {
{ .input = &tegra_clk_32k, .value = 0},
{ .input = &tegra_pll_s, .value = 1},
- { 0, 0},
+ { NULL , 0},
};
static struct clk tegra_clk_m = {
@@ -1861,7 +1861,7 @@
{ .name = "ext_audio_clk1", .value = 6 },
{ .name = "ext_vimclk", .value = 7 },
#endif
- { 0, 0 }
+ { NULL, 0 }
};
static struct clk tegra_clk_audio = {
@@ -1885,7 +1885,7 @@
},
};
-struct clk_lookup tegra_audio_clk_lookups[] = {
+static struct clk_lookup tegra_audio_clk_lookups[] = {
{ .con_id = "audio", .clk = &tegra_clk_audio },
{ .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
};
@@ -1926,7 +1926,7 @@
{ .input = &tegra_pll_p_out3, .value = 6},
{ .input = &tegra_clk_d, .value = 7},
{ .input = &tegra_pll_x, .value = 8},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_sclk[] = {
@@ -1938,7 +1938,7 @@
{ .input = &tegra_clk_d, .value = 5},
{ .input = &tegra_clk_32k, .value = 6},
{ .input = &tegra_pll_m_out1, .value = 7},
- { 0, 0},
+ { NULL, 0},
};
static struct clk tegra_clk_cclk = {
@@ -2009,7 +2009,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_p, .value = 2},
{ .input = &tegra_pll_a_out0, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
@@ -2017,7 +2017,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_p, .value = 2},
{ .input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
@@ -2025,7 +2025,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_m, .value = 2},
{ .input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
@@ -2033,7 +2033,7 @@
{.input = &tegra_clk_audio_2x, .value = 1},
{.input = &tegra_pll_p, .value = 2},
{.input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
@@ -2041,7 +2041,7 @@
{.input = &tegra_pll_d_out0, .value = 1},
{.input = &tegra_pll_c, .value = 2},
{.input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
@@ -2050,39 +2050,39 @@
{.input = &tegra_clk_audio, .value = 2},
{.input = &tegra_clk_m, .value = 3},
{.input = &tegra_clk_32k, .value = 4},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
{.input = &tegra_pll_p, .value = 0},
{.input = &tegra_pll_c, .value = 1},
{.input = &tegra_pll_m, .value = 2},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_clk_m[] = {
{ .input = &tegra_clk_m, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_out3[] = {
{ .input = &tegra_pll_p_out3, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_plld[] = {
{ .input = &tegra_pll_d, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_clk_32k[] = {
{ .input = &tegra_clk_32k, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pclk[] = {
{ .input = &tegra_clk_pclk, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk tegra_clk_emc = {
@@ -2125,7 +2125,7 @@
.parent = _parent, \
}
-struct clk tegra_list_clks[] = {
+static struct clk tegra_list_clks[] = {
PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0),
PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET),
PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
@@ -2221,7 +2221,7 @@
* configuration. List those here to register them twice in the clock lookup
* table under two names.
*/
-struct clk_duplicate tegra_clk_duplicates[] = {
+static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("uarta", "tegra_uart.0", NULL),
CLK_DUPLICATE("uartb", "tegra_uart.1", NULL),
CLK_DUPLICATE("uartc", "tegra_uart.2", NULL),
@@ -2252,7 +2252,7 @@
.clk = ck, \
}
-struct clk *tegra_ptr_clks[] = {
+static struct clk *tegra_ptr_clks[] = {
&tegra_clk_32k,
&tegra_pll_s,
&tegra_clk_m,
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 9035042..e2272d2 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -62,9 +62,9 @@
static u64 persistent_ms, last_persistent_ms;
#define timer_writel(value, reg) \
- __raw_writel(value, (u32)timer_reg_base + (reg))
+ __raw_writel(value, timer_reg_base + (reg))
#define timer_readl(reg) \
- __raw_readl((u32)timer_reg_base + (reg))
+ __raw_readl(timer_reg_base + (reg))
static int tegra_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
@@ -133,7 +133,7 @@
* tegra_rtc driver could be executing to avoid race conditions
* on the RTC shadow register
*/
-u64 tegra_rtc_read_ms(void)
+static u64 tegra_rtc_read_ms(void)
{
u32 ms = readl(rtc_base + RTC_MILLISECONDS);
u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 32a7b0f..966a5a0 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -48,39 +48,12 @@
endchoice
-choice
- prompt "Memory configuration"
- default MACH_U300_SINGLE_RAM
- ---help---
- You have to config the kernel according to the physical memory
- configuration.
-
-config MACH_U300_SINGLE_RAM
- bool "Single RAM"
- help
- Select this if you want support for Single RAM phones.
-
-config MACH_U300_DUAL_RAM
- bool "Dual RAM"
- help
- Select this if you want support for Dual RAM phones.
- This is two RAM memories on different EMIFs.
-endchoice
-
config U300_DEBUG
bool "Debug support for U300"
depends on PM
help
Debug support for U300 in sysfs, procfs etc.
-config MACH_U300_SEMI_IS_SHARED
- bool "The SEMI is used by both the access and application side"
- depends on MACH_U300
- help
- This makes it possible to use the SEMI (Shared External
- Memory Interface) from both from access and application
- side.
-
config MACH_U300_SPIDUMMY
bool "SSP/SPI dummy chip"
select SPI
@@ -93,25 +66,6 @@
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-comment "All the settings below must match the bootloader's settings"
-
-config MACH_U300_ACCESS_MEM_SIZE
- int "Access CPU memory allocation"
- range 7 25
- depends on MACH_U300_SINGLE_RAM
- default 13
- help
- How much memory in MiB that the Access side CPU has allocated
-
-config MACH_U300_2MB_ALIGNMENT_FIX
- bool "2MiB alignment fix"
- depends on MACH_U300_SINGLE_RAM
- default y
- help
- If yes and the Access side CPU has allocated an odd size in
- MiB, this fix gives you one MiB extra that would otherwise be
- lost due to Linux 2 MiB alignment policy.
-
endmenu
endif
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
index 6fbfc6e..a06bb0d 100644
--- a/arch/arm/mach-u300/Makefile.boot
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -1,15 +1,4 @@
-# Note: the following conditions must always be true:
-# ZRELADDR == virt_to_phys(TEXTADDR)
-# PARAMS_PHYS must be within 4MB of ZRELADDR
-# INITRD_PHYS must be in RAM
-
-ifdef CONFIG_MACH_U300_SINGLE_RAM
- zreladdr-y := 0x28E08000
- params_phys-y := 0x28E00100
-else
- zreladdr-y := 0x48008000
- params_phys-y := 0x48000100
-endif
-
+ zreladdr-y := 0x48008000
+params_phys-y := 0x48000100
# This isn't used.
-#initrd_phys-y := 0x29800000
+#initrd_phys-y := 0x48800000
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 399c89f..724037e 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -25,6 +25,7 @@
#include <linux/err.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h>
+#include <linux/dma-mapping.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -68,30 +69,13 @@
.length = SZ_32K,
.type = MT_DEVICE,
},
- {
- .virtual = 0xffff2000, /* TCM memory */
- .pfn = __phys_to_pfn(0xffff2000),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-
- /*
- * This overlaps with the IRQ vectors etc at 0xffff0000, so these
- * may have to be moved to 0x00000000 in order to use the ROM.
- */
- /*
- {
- .virtual = U300_BOOTROM_VIRT_BASE,
- .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
- .length = SZ_64K,
- .type = MT_ROM,
- },
- */
};
void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+ /* We enable a real big DMA buffer if need be. */
+ init_consistent_dma_size(SZ_4M);
}
/*
@@ -361,51 +345,6 @@
}
};
-/* TODO: These should be protected by suitable #ifdef's */
-static struct resource ave_resources[] = {
- {
- .name = "AVE3e I/O Area",
- .start = U300_VIDEOENC_BASE,
- .end = U300_VIDEOENC_BASE + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e IRQ0",
- .start = IRQ_U300_VIDEO_ENC_0,
- .end = IRQ_U300_VIDEO_ENC_0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e IRQ1",
- .start = IRQ_U300_VIDEO_ENC_1,
- .end = IRQ_U300_VIDEO_ENC_1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e Physmem Area",
- .start = 0, /* 0 will be remapped to reserved memory */
- .end = SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- /*
- * The AVE3e requires two regions of 256MB that it considers
- * "invisible". The hardware will not be able to access these
- * addresses, so they should never point to system RAM.
- */
- {
- .name = "AVE3e Reserved 0",
- .start = 0xd0000000,
- .end = 0xd0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e Reserved 1",
- .start = 0xe0000000,
- .end = 0xe0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
static struct resource dma_resource[] = {
{
.start = U300_DMAC_BASE,
@@ -1612,13 +1551,6 @@
},
};
-static struct platform_device ave_device = {
- .name = "video_enc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ave_resources),
- .resource = ave_resources,
-};
-
static struct platform_device dma_device = {
.name = "coh901318",
.id = -1,
@@ -1643,10 +1575,8 @@
&gpio_device,
&nand_device,
&wdog_device,
- &ave_device
};
-
/*
* Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
* together so some interrupts are connected to the first one and some
@@ -1837,17 +1767,10 @@
/* Register subdevices on the SPI bus */
u300_spi_register_board_devices();
-#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
- /*
- * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
- * both subsystems are requesting this mode.
- * If we not share the Acc SDRAM, this is never the case. Therefore
- * enable it here from the App side.
- */
+ /* Enable SEMI self refresh */
val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
-#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
}
static int core_module_init(void)
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..c808f34 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -13,30 +13,7 @@
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
-#ifdef CONFIG_MACH_U300_DUAL_RAM
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
-
-#else
-
-#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#else
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
-#endif
-
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
+#define PLAT_PHYS_OFFSET UL(0x48000000)
+#define BOOT_PARAMS_OFFSET 0x100
#endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..89422ee 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -23,21 +23,6 @@
#include <asm/mach/arch.h>
#include <asm/memory.h>
-static void __init u300_reserve(void)
-{
- /*
- * U300 - This platform family can share physical memory
- * between two ARM cpus, one running Linux and the other
- * running another OS.
- */
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
- CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
- memblock_reserve(PHYS_OFFSET, 0x00100000);
-#endif
-#endif
-}
-
static void __init u300_init_machine(void)
{
u300_init_devices();
@@ -61,9 +46,8 @@
MACHINE_START(U300, MACH_U300_STRING)
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .boot_params = BOOT_PARAMS_OFFSET,
+ .atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
- .reserve = u300_reserve,
.init_irq = u300_init_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 4210cb4..a3e0c86 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -6,6 +6,7 @@
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
+ select ARM_ERRATA_754322
menu "Ux500 SoC"
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 1694916..9fd00a6 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,6 +4,7 @@
obj-y := clock.o cpu.o devices.o devices-common.o \
id.o usb.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f26fd76..4108c7b 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -153,7 +153,7 @@
GPIO7_U1_RTSn | PIN_OUTPUT_HIGH,
};
-static pin_cfg_t mop500_pins_hrefv60[] = {
+static pin_cfg_t hrefv60_pins[] = {
/* WLAN */
GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */
GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */
@@ -279,14 +279,26 @@
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins_common,
- ARRAY_SIZE(mop500_pins_common));
- if (machine_is_hrefv60())
- nmk_config_pins(mop500_pins_hrefv60,
- ARRAY_SIZE(mop500_pins_hrefv60));
- else if (machine_is_snowball())
- nmk_config_pins(snowball_pins,
- ARRAY_SIZE(snowball_pins));
- else
- nmk_config_pins(mop500_pins_default,
- ARRAY_SIZE(mop500_pins_default));
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(mop500_pins_default,
+ ARRAY_SIZE(mop500_pins_default));
+}
+
+void __init snowball_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
+}
+
+void __init hrefv60_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(hrefv60_pins,
+ ARRAY_SIZE(hrefv60_pins));
}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index d0cb9e5..6826fae 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -216,30 +216,48 @@
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
- if (!machine_is_snowball())
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
- if (machine_is_hrefv60() || machine_is_snowball()) {
- if (machine_is_hrefv60()) {
- mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
- sdi0_en = HREFV60_SDMMC_EN_GPIO;
- sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
- } else if (machine_is_snowball()) {
- mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
- mop500_sdi0_data.cd_invert = true;
- sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
- sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
- }
- sdi0_configure();
- }
-
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
* mop500_sdi_tc35892_init() above.
*/
}
+
+void __init snowball_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
+
+void __init hrefv60_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cd54aba..4810968 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -603,28 +603,14 @@
{
int i2c0_devs;
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- if (!machine_is_snowball()) {
- if (machine_is_hrefv60())
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- else
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
- }
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
u8500_init_devices();
mop500_pins_init();
- if (machine_is_snowball())
- platform_add_devices(snowball_platform_devs,
- ARRAY_SIZE(snowball_platform_devs));
- else
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
@@ -632,8 +618,66 @@
mop500_uart_init();
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- if (machine_is_hrefv60())
- i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init snowball_init_machine(void)
+{
+ int i2c0_devs;
+
+ u8500_init_devices();
+
+ snowball_pins_init();
+
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+
+ mop500_i2c_init();
+ snowball_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init hrefv60_init_machine(void)
+{
+ int i2c0_devs;
+
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+
+ u8500_init_devices();
+
+ hrefv60_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
@@ -645,7 +689,7 @@
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -654,18 +698,18 @@
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
- .init_machine = mop500_init_machine,
+ .init_machine = hrefv60_init_machine,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
- .init_machine = mop500_init_machine,
+ .init_machine = snowball_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index ee77a89..de18a2a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -40,10 +40,13 @@
struct i2c_board_info;
extern void mop500_sdi_init(void);
+extern void snowball_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pins_init(void);
+void __init hrefv60_pins_init(void);
+void __init snowball_pins_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index e58f0f5..166d47a 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -118,7 +118,7 @@
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
new file mode 100644
index 0000000..122ddde
--- /dev/null
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/hardware.h>
+#include <mach/id.h>
+
+static void __iomem *l2x0_base;
+
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* wait for the operation to complete */
+ while (readl_relaxed(reg) & mask)
+ cpu_relax();
+}
+
+static inline void ux500_cache_sync(void)
+{
+ writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
+ ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
+
+ /* invalidate all ways */
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ ux500_cache_sync();
+}
+
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ return 0;
+}
+
+static int __init ux500_l2x0_init(void)
+{
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
+
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+
+ /* 64KB way size, 8 way associativity, force WA */
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+ /* Override invalidate function */
+ outer_cache.disable = ux500_l2x0_disable;
+ outer_cache.inv_all = ux500_l2x0_inv_all;
+
+ return 0;
+}
+
+early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1da23bb..252e8b3 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -11,8 +11,6 @@
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/localtimer.h>
@@ -26,10 +24,6 @@
void __iomem *_PRCMU_BASE;
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2x0_base;
-#endif
-
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
@@ -57,69 +51,6 @@
clk_init();
}
-#ifdef CONFIG_CACHE_L2X0
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
- /* wait for the operation to complete */
- while (readl_relaxed(reg) & mask)
- ;
-}
-
-static inline void ux500_cache_sync(void)
-{
- void __iomem *base = l2x0_base;
-
- writel_relaxed(0, base + L2X0_CACHE_SYNC);
- ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
- void __iomem *base = l2x0_base;
- uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
-
- /* invalidate all ways */
- writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
- ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
- ux500_cache_sync();
-}
-
-static int ux500_l2x0_init(void)
-{
- if (cpu_is_u5500())
- l2x0_base = __io_address(U5500_L2CC_BASE);
- else if (cpu_is_u8500())
- l2x0_base = __io_address(U8500_L2CC_BASE);
- else
- ux500_unknown_soc();
-
- /* 64KB way size, 8 way associativity, force WA */
- l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
- /* Override invalidate function */
- outer_cache.disable = ux500_l2x0_disable;
- outer_cache.inv_all = ux500_l2x0_inv_all;
-
- return 0;
-}
-early_initcall(ux500_l2x0_init);
-#endif
-
static void __init ux500_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 7dd0807..6fb3c4b 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -51,15 +51,9 @@
static inline void arch_decomp_setup(void)
{
/* Check in run time if we run on an U8500 or U5500 */
- if (machine_is_u8500() ||
- machine_is_svp8500v1() ||
- machine_is_svp8500v2() ||
- machine_is_hrefv60() ||
- machine_is_snowball())
- ux500_uart_base = U8500_UART2_BASE;
- else if (machine_is_u5500())
+ if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;
- else /* not much can be done to help here */
+ else
ux500_uart_base = U8500_UART2_BASE;
}
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index f923764..8b1d1a7 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -35,40 +35,40 @@
#define GPIO4_GPIO PIN_CFG(4, GPIO)
#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP)
#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
#define GPIO5_GPIO PIN_CFG(5, GPIO)
#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP)
#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
#define GPIO6_GPIO PIN_CFG(6, GPIO)
#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP)
#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
#define GPIO7_GPIO PIN_CFG(7, GPIO)
#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP)
#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
#define GPIO8_GPIO PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP)
-#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP)
+#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP)
+#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP)
#define GPIO9_GPIO PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP)
-#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP)
+#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP)
+#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP)
#define GPIO10_GPIO PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP)
-#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP)
+#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP)
#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
#define GPIO11_GPIO PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP)
-#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP)
+#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP)
#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
#define GPIO12_GPIO PIN_CFG(12, GPIO)
@@ -87,66 +87,66 @@
#define GPIO16_GPIO PIN_CFG(16, GPIO)
#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP)
#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
#define GPIO17_GPIO PIN_CFG(17, GPIO)
#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP)
#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
#define GPIO18_GPIO PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP)
+#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP)
#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
#define GPIO19_GPIO PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP)
+#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP)
#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
#define GPIO20_GPIO PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP)
+#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP)
#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
#define GPIO21_GPIO PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP)
+#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP)
#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
#define GPIO22_GPIO PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP)
+#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP)
#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
#define GPIO23_GPIO PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP)
+#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP)
#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
#define GPIO24_GPIO PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP)
+#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP)
#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
#define GPIO25_GPIO PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP)
+#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP)
#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
#define GPIO26_GPIO PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP)
+#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP)
#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
#define GPIO27_GPIO PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP)
+#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP)
#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
#define GPIO28_GPIO PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP)
+#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP)
#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
@@ -357,48 +357,48 @@
#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
#define GPIO128_GPIO PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP)
+#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP)
#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
#define GPIO129_GPIO PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP)
+#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP)
#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
#define GPIO130_GPIO PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP)
+#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP)
#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
#define GPIO131_GPIO PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP)
+#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP)
#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
#define GPIO132_GPIO PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP)
+#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP)
#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
#define GPIO133_GPIO PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP)
+#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP)
#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
#define GPIO134_GPIO PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP)
+#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP)
#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
#define GPIO135_GPIO PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP)
+#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP)
#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
#define GPIO136_GPIO PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP)
+#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP)
#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
#define GPIO137_GPIO PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP)
+#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP)
#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
#define GPIO138_GPIO PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP)
+#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP)
#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
#define GPIO139_GPIO PIN_CFG(139, GPIO)
@@ -434,10 +434,10 @@
#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
#define GPIO147_GPIO PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP)
+#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP)
#define GPIO148_GPIO PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP)
+#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP)
#define GPIO149_GPIO PIN_CFG(149, GPIO)
#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
@@ -459,82 +459,82 @@
#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
#define GPIO153_GPIO PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
#define GPIO154_GPIO PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
#define GPIO155_GPIO PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
#define GPIO156_GPIO PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
#define GPIO157_GPIO PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP)
#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
#define GPIO158_GPIO PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP)
#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
#define GPIO159_GPIO PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP)
#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
#define GPIO160_GPIO PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP)
#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
#define GPIO160_NONE PIN_CFG(160, ALT_C)
#define GPIO161_GPIO PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
#define GPIO162_GPIO PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
#define GPIO163_GPIO PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
#define GPIO164_GPIO PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP)
#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
#define GPIO165_GPIO PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP)
#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
#define GPIO166_GPIO PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP)
#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
#define GPIO167_GPIO PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP)
#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
#define GPIO168_GPIO PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP)
#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
#define GPIO168_NONE PIN_CFG(168, ALT_C)
@@ -569,39 +569,39 @@
#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
#define GPIO197_GPIO PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP)
+#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP)
#define GPIO198_GPIO PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP)
+#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP)
#define GPIO199_GPIO PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP)
+#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP)
#define GPIO200_GPIO PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP)
+#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP)
#define GPIO201_GPIO PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP)
+#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP)
#define GPIO202_GPIO PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP)
+#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP)
#define GPIO202_PWL PIN_CFG(202, ALT_B)
#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
#define GPIO203_GPIO PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP)
+#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP)
#define GPIO204_GPIO PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP)
+#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP)
#define GPIO205_GPIO PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP)
+#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP)
#define GPIO206_GPIO PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP)
+#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP)
#define GPIO207_GPIO PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP)
+#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP)
#define GPIO208_GPIO PIN_CFG(208, GPIO)
#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
@@ -632,21 +632,25 @@
#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
+#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C)
#define GPIO216_GPIO PIN_CFG(216, GPIO)
#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP)
+#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP)
+#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C)
#define GPIO217_GPIO PIN_CFG(217, GPIO)
#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
+#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C)
#define GPIO218_GPIO PIN_CFG(218, GPIO)
#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP)
+#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP)
+#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C)
#define GPIO219_GPIO PIN_CFG(219, GPIO)
#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
@@ -694,12 +698,12 @@
#define GPIO229_GPIO PIN_CFG(229, GPIO)
#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
#define GPIO229_PWL PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP)
+#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP)
#define GPIO230_GPIO PIN_CFG(230, GPIO)
#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
#define GPIO230_PWL PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP)
+#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP)
#define GPIO256_GPIO PIN_CFG(256, GPIO)
#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b..fda4866 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23df..feaf9cb 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@
MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d0d267a..1fafc32 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -443,7 +443,7 @@
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d..a464c75 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@
}
MACHINE_START(BV07, "Benign BV07 Mini Netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = vt8500_reserve_mem,
.map_io = vt8500_map_io,
.init_irq = vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadb..cf910a9 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@
}
MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = wm8505_reserve_mem,
.map_io = wm8505_map_io,
.init_irq = wm8505_init_irq,
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde..31c1090 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90P910EVB, "W90P910EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc910evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b..4062e55 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@
MACHINE_START(W90P950EVB, "W90P950EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc950evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645..0ab9995 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90N960EVB, "W90N960EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc960evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c3ff82f..01f5987 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -18,12 +18,14 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/memory.h>
#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
+#include <asm/mach/arch.h>
#include "mm.h"
@@ -117,26 +119,37 @@
}
#ifdef CONFIG_MMU
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT)
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static pte_t **consistent_pte;
+
+#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+
+unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+
+void __init init_consistent_dma_size(unsigned long size)
+{
+ unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+
+ BUG_ON(consistent_pte); /* Check we're called before DMA region init */
+ BUG_ON(base < VMALLOC_END);
+
+ /* Grow region to accommodate specified size */
+ if (base < consistent_base)
+ consistent_base = base;
+}
#include "vmregion.h"
static struct arm_vmregion_head consistent_head = {
.vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
@@ -155,7 +168,17 @@
pmd_t *pmd;
pte_t *pte;
int i = 0;
- u32 base = CONSISTENT_BASE;
+ unsigned long base = consistent_base;
+ unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+
+ consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
+ if (!consistent_pte) {
+ pr_err("%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
+ consistent_head.vm_start = base;
do {
pgd = pgd_offset(&init_mm, base);
@@ -198,7 +221,7 @@
size_t align;
int bit;
- if (!consistent_pte[0]) {
+ if (!consistent_pte) {
printk(KERN_ERR "%s: not initialised\n", __func__);
dump_stack();
return NULL;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index cc7e2d8..34409a0 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -653,9 +653,6 @@
" ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n"
#endif
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
-#ifdef CONFIG_MMU
- " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n"
-#endif
" vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
" lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
#ifdef CONFIG_HIGHMEM
@@ -674,9 +671,6 @@
MLK(ITCM_OFFSET, (unsigned long) itcm_end),
#endif
MLK(FIXADDR_START, FIXADDR_TOP),
-#ifdef CONFIG_MMU
- MLM(CONSISTENT_BASE, CONSISTENT_END),
-#endif
MLM(VMALLOC_START, VMALLOC_END),
MLM(PAGE_OFFSET, (unsigned long)high_memory),
#ifdef CONFIG_HIGHMEM
@@ -699,9 +693,6 @@
* be detected at build time already.
*/
#ifdef CONFIG_MMU
- BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE);
- BUG_ON(VMALLOC_END > CONSISTENT_BASE);
-
BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
BUG_ON(TASK_SIZE > MODULES_VADDR);
#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 594d677..ea9c9f3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -273,6 +273,14 @@
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_SO] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_MT_UNCACHED,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
+ PMD_SECT_UNCACHED | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 2e6849b..88fb3d9 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,31 +379,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 4
+.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index cd8f79c..9f8fd91 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,31 +394,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 4
+.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#endif
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 69e7f2e..7d91545 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -168,20 +168,19 @@
mov pc, lr
.globl cpu_sa1100_suspend_size
-.equ cpu_sa1100_suspend_size, 4*4
+.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
- stmia r0, {r4 - r7} @ store cp regs
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r5, c13, c0, 0 @ PID
+ mrc p15, 0, r6, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r6} @ store cp regs
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
- ldmia r0, {r4 - r7} @ load cp regs
+ ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
@@ -189,13 +188,9 @@
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- mov r0, r7 @ control register
- mov r2, r5, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r5, c13, c0, 0 @ PID
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a923aa0..d061d2f 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -128,20 +128,18 @@
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
-.equ cpu_v6_suspend_size, 4 * 8
+.equ cpu_v6_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
- mrc p15, 0, r11, c1, c0, 0 @ control register
- stmia r0, {r4 - r11}
- ldmfd sp!, {r4- r11, pc}
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r9, c1, c0, 0 @ control register
+ stmia r0, {r4 - r9}
+ ldmfd sp!, {r4- r9, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
@@ -150,25 +148,21 @@
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
- ldmia r0, {r4 - r11}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0, {r4 - r9}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
- mov r0, r11 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
string cpu_v6_name, "ARMv6-compatible processor"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 9049c07..6af366c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -217,56 +217,50 @@
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 9
+.equ cpu_v7_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- stmia r0!, {r4 - r6}
+ mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ TTB 0
- mrc p15, 0, r8, c2, c0, 1 @ TTB 1
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r11}
- ldmfd sp!, {r4 - r11, pc}
+ mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r8, c1, c0, 0 @ Control register
+ mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r6 - r10}
+ ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
- ldmia r0!, {r4 - r6}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r11}
+ mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ ldmia r0, {r6 - r10}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ TTB 0
- mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
- teq r4, r10 @ Is it already set?
- mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ teq r4, r9 @ Is it already set?
+ mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
+ mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
- mov r0, r9 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
__CPUINIT
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 755e1bf..abf0507 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -406,24 +406,23 @@
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 7
+.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmia sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmia sp!, {r4 - r9, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
@@ -433,15 +432,10 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =0x542e @ section flags
+ orr r1, r1, #0x18 @ cache the page table in L2
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index fbc06e5..3277904 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -520,24 +520,23 @@
.align
.globl cpu_xscale_suspend_size
-.equ cpu_xscale_suspend_size, 4 * 7
+.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmfd sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmfd sp!, {r4 - r9, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -545,13 +544,9 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 11be5cd..3ec84b9 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -40,19 +40,4 @@
# endif
#endif
-#if defined(CONFIG_MX3_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
-
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 05a3936..22cb97d 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -37,7 +37,6 @@
* SLPM value = same as normal
*
* PIN_CFG - default config with alternate function
- * PIN_CFG_PULL - default config with alternate function and pull up/down
*/
typedef unsigned long pin_cfg_t;
@@ -133,10 +132,6 @@
(PIN_CFG_DEFAULT |\
(PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-#define PIN_CFG_PULL(num, alt, pull) \
- ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
- (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
-
extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98d..bd9a06b 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -26,54 +26,8 @@
#include <plat/mmc.h>
#include <mach/gpio.h>
#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{
- int i;
-
- omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!omap_mcbsp_devices) {
- printk(KERN_ERR "Could not register McBSP devices\n");
- return;
- }
-
- for (i = 0; i < size; i++) {
- struct platform_device *new_mcbsp;
- int ret;
-
- new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
- if (!new_mcbsp)
- continue;
- platform_device_add_resources(new_mcbsp, &res[i * res_count],
- res_count);
- new_mcbsp->dev.platform_data = &config[i];
- ret = platform_device_add(new_mcbsp);
- if (ret) {
- platform_device_put(new_mcbsp);
- continue;
- }
- omap_mcbsp_devices[i] = new_mcbsp;
- }
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 3341ca4..0c7caf2 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -135,7 +135,7 @@
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
struct omap_i2c_bus_platform_data *pdata;
@@ -160,12 +160,12 @@
*/
if (cpu_is_omap34xx())
pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- od = omap_device_build(name, bus_id, oh, pdata,
+ pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
- WARN(IS_ERR(od), "Could not build omap_device for %s\n", name);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
#else
static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index df4b968..197ca03 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -80,8 +80,6 @@
*
* @div is the divisor that should be applied to the parent clock's rate
* to produce the current clock's rate.
- *
- * XXX @flags probably should be replaced with an struct omap_chip.
*/
struct clksel_rate {
u32 val;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..abda2c7 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -45,6 +45,15 @@
extern void omap_reserve(void);
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
@@ -74,7 +83,11 @@
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap242x_map_io(void);
+void omap243x_map_io(void);
void omap3_map_io(void);
+void omap4_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67b3d75..2f90269 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -44,13 +44,6 @@
int omap_type(void);
-struct omap_chip_id {
- u16 oc;
- u8 type;
-};
-
-#define OMAP_CHIP_INIT(x) { .oc = x }
-
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
@@ -60,19 +53,6 @@
unsigned int omap_rev(void);
/*
- * Define CPU revision bits
- *
- * Verbose meaning of the revision bits may be different for a silicon
- * family. This difference can be handled separately.
- */
-#define OMAP_REVBITS_00 0x00
-#define OMAP_REVBITS_01 0x01
-#define OMAP_REVBITS_02 0x02
-#define OMAP_REVBITS_03 0x03
-#define OMAP_REVBITS_04 0x04
-#define OMAP_REVBITS_05 0x05
-
-/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
@@ -262,7 +242,7 @@
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3505, 0x3517)
IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
@@ -354,8 +334,9 @@
(!omap3_has_sgx()) && \
(omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3505() is_omap3505()
# define cpu_is_omap3517() is_omap3517()
+# define cpu_is_omap3505() (cpu_is_omap3517() && \
+ !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti816x() is_ti816x()
@@ -379,35 +360,31 @@
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
#define OMAP243X_CLASS 0x24300024
#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
#define OMAP343X_CLASS 0x34300034
#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
#define OMAP363X_CLASS 0x36300034
#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP35XX_CLASS 0x35000034
-#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
-#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
-#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
-#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
-#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
-#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+#define OMAP3517_CLASS 0x35170034
+#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
+#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -418,61 +395,6 @@
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
-#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
-#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
-#define CHIP_IS_OMAP3630ES1 (1 << 7)
-#define CHIP_IS_OMAP4430ES1 (1 << 8)
-#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
-#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
-#define CHIP_IS_OMAP4430ES2 (1 << 11)
-#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
-#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
-#define CHIP_IS_TI816X (1 << 14)
-#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
-
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
- CHIP_IS_OMAP4430ES2 | \
- CHIP_IS_OMAP4430ES2_1 | \
- CHIP_IS_OMAP4430ES2_2 | \
- CHIP_IS_OMAP4460ES1_0)
-
-/*
- * "GE" here represents "greater than or equal to" in terms of ES
- * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
- * chips at ES2 and beyond, but not, for example, any OMAP lines after
- * OMAP3.
- */
-#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
- CHIP_IS_OMAP3430ES3_0 | \
- CHIP_GE_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1 | \
- CHIP_GE_OMAP3630ES1_1)
-#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \
- CHIP_IS_OMAP3630ES1_2)
-
-int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
/*
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index d72ec85..a93a00d 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -300,7 +300,7 @@
#endif
extern void omap2_init_common_infrastructure(void);
-extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap omap_ioremap
@@ -309,6 +309,8 @@
void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
void omap_iounmap(volatile void __iomem *addr);
+extern void __init omap_init_consistent_dma_size(void);
+
#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 9882c65..8fa74e2 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -25,9 +25,7 @@
#define __ASM_ARCH_OMAP_MCBSP_H
#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <plat/clock.h>
+#include <linux/clk.h>
/* macro for building platform_device for McBSP ports */
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
@@ -40,104 +38,60 @@
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-#define OMAP7XX_MCBSP1_BASE 0xfffb1000
-#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+/* McBSP register numbers. Register address offset = num * reg_step */
+enum {
+ /* Common registers */
+ OMAP_MCBSP_REG_SPCR2 = 4,
+ OMAP_MCBSP_REG_SPCR1,
+ OMAP_MCBSP_REG_RCR2,
+ OMAP_MCBSP_REG_RCR1,
+ OMAP_MCBSP_REG_XCR2,
+ OMAP_MCBSP_REG_XCR1,
+ OMAP_MCBSP_REG_SRGR2,
+ OMAP_MCBSP_REG_SRGR1,
+ OMAP_MCBSP_REG_MCR2,
+ OMAP_MCBSP_REG_MCR1,
+ OMAP_MCBSP_REG_RCERA,
+ OMAP_MCBSP_REG_RCERB,
+ OMAP_MCBSP_REG_XCERA,
+ OMAP_MCBSP_REG_XCERB,
+ OMAP_MCBSP_REG_PCR0,
+ OMAP_MCBSP_REG_RCERC,
+ OMAP_MCBSP_REG_RCERD,
+ OMAP_MCBSP_REG_XCERC,
+ OMAP_MCBSP_REG_XCERD,
+ OMAP_MCBSP_REG_RCERE,
+ OMAP_MCBSP_REG_RCERF,
+ OMAP_MCBSP_REG_XCERE,
+ OMAP_MCBSP_REG_XCERF,
+ OMAP_MCBSP_REG_RCERG,
+ OMAP_MCBSP_REG_RCERH,
+ OMAP_MCBSP_REG_XCERG,
+ OMAP_MCBSP_REG_XCERH,
-#define OMAP1510_MCBSP1_BASE 0xe1011800
-#define OMAP1510_MCBSP2_BASE 0xfffb1000
-#define OMAP1510_MCBSP3_BASE 0xe1017000
+ /* OMAP1-OMAP2420 registers */
+ OMAP_MCBSP_REG_DRR2 = 0,
+ OMAP_MCBSP_REG_DRR1,
+ OMAP_MCBSP_REG_DXR2,
+ OMAP_MCBSP_REG_DXR1,
-#define OMAP1610_MCBSP1_BASE 0xe1011800
-#define OMAP1610_MCBSP2_BASE 0xfffb1000
-#define OMAP1610_MCBSP3_BASE 0xe1017000
+ /* OMAP2430 and onwards */
+ OMAP_MCBSP_REG_DRR = 0,
+ OMAP_MCBSP_REG_DXR = 2,
+ OMAP_MCBSP_REG_SYSCON = 35,
+ OMAP_MCBSP_REG_THRSH2,
+ OMAP_MCBSP_REG_THRSH1,
+ OMAP_MCBSP_REG_IRQST = 40,
+ OMAP_MCBSP_REG_IRQEN,
+ OMAP_MCBSP_REG_WAKEUPEN,
+ OMAP_MCBSP_REG_XCCR,
+ OMAP_MCBSP_REG_RCCR,
+ OMAP_MCBSP_REG_XBUFFSTAT,
+ OMAP_MCBSP_REG_RBUFFSTAT,
+ OMAP_MCBSP_REG_SSELCR,
+};
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_DRR 0x02
-#define OMAP_MCBSP_REG_DXR 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR 0x00
-#define OMAP_MCBSP_REG_RCCR 0x00
-
-#else
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_DRR 0x00
-#define OMAP_MCBSP_REG_DXR 0x08
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MCBSP_REG_SYSCON 0x8C
-#define OMAP_MCBSP_REG_THRSH2 0x90
-#define OMAP_MCBSP_REG_THRSH1 0x94
-#define OMAP_MCBSP_REG_IRQST 0xA0
-#define OMAP_MCBSP_REG_IRQEN 0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
-#define OMAP_MCBSP_REG_XCCR 0xAC
-#define OMAP_MCBSP_REG_RCCR 0xB0
-#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4
-#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8
-#define OMAP_MCBSP_REG_SSELCR 0xBC
-
+/* OMAP3 sidetone control registers */
#define OMAP_ST_REG_REV 0x00
#define OMAP_ST_REG_SYSCONFIG 0x10
#define OMAP_ST_REG_IRQSTATUS 0x18
@@ -146,8 +100,6 @@
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#endif
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -344,20 +296,20 @@
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void (*free)(unsigned int);
- int (*set_clks_src)(u8, u8);
};
struct omap_mcbsp_platform_data {
- unsigned long phys_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP3
- /* Sidetone block for McBSP 2 and 3 */
- unsigned long phys_base_st;
-#endif
u16 buffer_size;
- unsigned int mcbsp_config_type;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
struct omap_mcbsp_st_data {
@@ -389,14 +341,12 @@
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP3
struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
-#endif
void *reg_cache;
- unsigned int mcbsp_config_type;
+ int reg_cache_size;
};
/**
@@ -408,16 +358,10 @@
};
extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count, omap_mcbsp_cache_size;
-
-#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+extern int omap_mcbsp_count;
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
@@ -426,18 +370,6 @@
u16 omap_mcbsp_get_tx_delay(unsigned int id);
u16 omap_mcbsp_get_rx_delay(unsigned int id);
int omap_mcbsp_get_dma_op_mode(unsigned int id);
-#else
-static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
-static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
-#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
void omap_mcbsp_start(unsigned int id, int tx, int rx);
@@ -453,21 +385,11 @@
int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
-#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
int omap_st_enable(unsigned int id);
int omap_st_disable(unsigned int id);
int omap_st_is_enabled(unsigned int id);
-#else
-static inline int omap_st_set_chgain(unsigned int id, int channel,
- s16 chgain) { return 0; }
-static inline int omap_st_get_chgain(unsigned int id, int channel,
- s16 *chgain) { return 0; }
-static inline int omap_st_enable(unsigned int id) { return 0; }
-static inline int omap_st_disable(unsigned int id) { return 0; }
-static inline int omap_st_is_enabled(unsigned int id) { return 0; }
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index e6720aa..7f9df6f 100644
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -85,18 +85,5 @@
#endif /* CONFIG_ARCH_OMAP15XX */
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
- (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index ee405b36..d4d9b96 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -68,7 +68,7 @@
*
*/
struct omap_device {
- struct platform_device pdev;
+ struct platform_device *pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
@@ -88,24 +88,18 @@
/* Core code interface */
-int omap_device_count_resources(struct omap_device *od);
-int omap_device_fill_resources(struct omap_device *od, struct resource *res);
-
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-int omap_device_register(struct omap_device *od);
-int omap_early_device_register(struct omap_device *od);
-
void __iomem *omap_device_get_rt_va(struct omap_device *od);
/* OMAP PM interface */
@@ -122,11 +116,6 @@
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
-static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
-{
- od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
/*
* Entries should be kept in latency order ascending
*
@@ -157,6 +146,17 @@
#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
/* Get omap_device pointer from platform_device pointer */
-#define to_omap_device(x) container_of((x), struct omap_device, pdev)
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+ return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+ struct omap_device *od = to_omap_device(pdev);
+
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0e329ca..9115aed 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -496,7 +496,6 @@
* @_state: internal-use hwmod state
* @_postsetup_state: internal-use state to leave the hwmod in after _setup()
* @flags: hwmod flags (documented below)
- * @omap_chip: OMAP chips this hwmod is present on
* @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
@@ -545,7 +544,6 @@
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
- const struct omap_chip_id omap_chip;
};
int omap_hwmod_register(struct omap_hwmod **ohs);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1ecfa9..e9b0e23 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <plat/omap7xx.h>
#include <plat/omap1510.h>
@@ -139,3 +140,10 @@
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 6c62af1..4b15cd7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,45 +24,40 @@
#include <linux/slab.h>
#include <plat/mcbsp.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-/* XXX These "sideways" includes are a sign that something is wrong */
-#include "../mach-omap2/cm2xxx_3xxx.h"
-#include "../mach-omap2/cm-regbits-34xx.h"
-
struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count, omap_mcbsp_cache_size;
+int omap_mcbsp_count;
+
+#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
- } else if (cpu_is_omap2420()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
+ __raw_writew((u16)val, addr);
} else {
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
- __raw_writel(val, mcbsp->io_base + reg);
+ ((u32 *)mcbsp->reg_cache)[reg] = val;
+ __raw_writel(val, addr);
}
}
static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
- } else if (cpu_is_omap2420()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ return !from_cache ? __raw_readw(addr) :
+ ((u16 *)mcbsp->reg_cache)[reg];
} else {
- return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ return !from_cache ? __raw_readl(addr) :
+ ((u32 *)mcbsp->reg_cache)[reg];
}
}
-#ifdef CONFIG_ARCH_OMAP3
static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
__raw_writel(val, mcbsp->st_data->io_base_st + reg);
@@ -72,7 +67,6 @@
{
return __raw_readl(mcbsp->st_data->io_base_st + reg);
}
-#endif
#define MCBSP_READ(mcbsp, reg) \
omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
@@ -187,7 +181,7 @@
MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
MCBSP_WRITE(mcbsp, XCCR, config->xccr);
MCBSP_WRITE(mcbsp, RCCR, config->rccr);
}
@@ -239,46 +233,28 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- data_reg = mcbsp->phys_dma_base;
-
- if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (mcbsp->pdata->reg_size == 2) {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR1;
+ data_reg = OMAP_MCBSP_REG_DRR1;
else
- data_reg += OMAP_MCBSP_REG_DXR1;
+ data_reg = OMAP_MCBSP_REG_DXR1;
} else {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR;
+ data_reg = OMAP_MCBSP_REG_DRR;
else
- data_reg += OMAP_MCBSP_REG_DXR;
+ data_reg = OMAP_MCBSP_REG_DXR;
}
- return data_reg;
+ return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
}
EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_device *find_omap_device_by_dev(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- return container_of(pdev, struct omap_device, pdev);
-}
-
static void omap_st_on(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Sidetone uses McBSP ICLK - which must not idle when sidetones
- * are enabled or sidetones start sounding ugly.
- */
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w &= ~(1 << (mcbsp->id - 2));
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
/* Enable McBSP Sidetone */
w = MCBSP_READ(mcbsp, SSELCR);
@@ -292,9 +268,6 @@
static void omap_st_off(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
@@ -302,17 +275,13 @@
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w |= 1 << (mcbsp->id - 2);
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
}
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
{
u16 val, i;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
val = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -340,9 +309,6 @@
{
u16 w;
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -525,14 +491,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_tx_thres)
MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
@@ -548,14 +513,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_rx_thres)
MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
@@ -625,6 +589,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of free locations in the buffer */
buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
@@ -648,6 +614,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of used locations in the buffer */
buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
@@ -683,46 +651,6 @@
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
-#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
-#endif
-
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
@@ -735,7 +663,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+ reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
if (!reg_cache) {
return -ENOMEM;
}
@@ -757,8 +685,9 @@
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -795,8 +724,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -825,8 +755,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -866,7 +797,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_start(mcbsp);
/* Only enable SRG, if McBSP is master */
@@ -904,7 +835,7 @@
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
}
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
/* Release the transmitter and receiver */
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w &= ~(tx ? XDISABLE : 0);
@@ -934,7 +865,7 @@
/* Reset transmitter */
tx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w |= (tx ? XDISABLE : 0);
MCBSP_WRITE(mcbsp, XCCR, w);
@@ -944,7 +875,7 @@
/* Reset receiver */
rx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, RCCR);
w |= (rx ? RDISABLE : 0);
MCBSP_WRITE(mcbsp, RCCR, w);
@@ -961,39 +892,72 @@
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
-/*
- * The following functions are only required on an OMAP1-only build.
- * mach-omap2/mcbsp.c contains the real functions
- */
-#ifndef CONFIG_ARCH_OMAP2PLUS
int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return -EINVAL;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+ return -EINVAL;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ src = "clks_ext";
+ else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ src = "clks_fclk";
+ else
+ return -EINVAL;
+
+ if (mcbsp->pdata->set_clk_src)
+ return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
+ else
+ return -EINVAL;
}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (mux == CLKR_SRC_CLKR)
+ src = "clkr";
+ else if (mux == CLKR_SRC_CLKX)
+ src = "clkx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
-}
-#endif
+ struct omap_mcbsp *mcbsp;
+ const char *src;
-#ifdef CONFIG_ARCH_OMAP3
+ if (mux == FSR_SRC_FSR)
+ src = "fsr";
+ else if (mux == FSR_SRC_FSX)
+ src = "fsx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
@@ -1084,6 +1048,17 @@
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
static ssize_t st_taps_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1142,27 +1117,6 @@
static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
-static const struct attribute *additional_attrs[] = {
- &dev_attr_max_tx_thres.attr,
- &dev_attr_max_rx_thres.attr,
- &dev_attr_dma_op_mode.attr,
- NULL,
-};
-
-static const struct attribute_group additional_attr_group = {
- .attrs = (struct attribute **)additional_attrs,
-};
-
-static inline int __devinit omap_additional_add(struct device *dev)
-{
- return sysfs_create_group(&dev->kobj, &additional_attr_group);
-}
-
-static inline void __devexit omap_additional_remove(struct device *dev)
-{
- sysfs_remove_group(&dev->kobj, &additional_attr_group);
-}
-
static const struct attribute *sidetone_attrs[] = {
&dev_attr_st_taps.attr,
NULL,
@@ -1172,10 +1126,9 @@
.attrs = (struct attribute **)sidetone_attrs,
};
-static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+static int __devinit omap_st_add(struct omap_mcbsp *mcbsp,
+ struct resource *res)
{
- struct platform_device *pdev;
- struct resource *res;
struct omap_mcbsp_st_data *st_data;
int err;
@@ -1185,9 +1138,6 @@
goto err1;
}
- pdev = container_of(mcbsp->dev, struct platform_device, dev);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
st_data->io_base_st = ioremap(res->start, resource_size(res));
if (!st_data->io_base_st) {
err = -ENOMEM;
@@ -1214,60 +1164,11 @@
{
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- if (st_data) {
- sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- iounmap(st_data->io_base_st);
- kfree(st_data);
- }
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
}
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
-{
- mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
- if (cpu_is_omap34xx()) {
- /*
- * Initially configure the maximum thresholds to a safe value.
- * The McBSP FIFO usage with these values should not go under
- * 16 locations.
- * If the whole FIFO without safety buffer is used, than there
- * is a possibility that the DMA will be not able to push the
- * new data on time, causing channel shifts in runtime.
- */
- mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
- mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
- /*
- * REVISIT: Set dmap_op_mode to THRESHOLD as default
- * for mcbsp2 instances.
- */
- if (omap_additional_add(mcbsp->dev))
- dev_warn(mcbsp->dev,
- "Unable to create additional controls\n");
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- if (omap_st_add(mcbsp))
- dev_warn(mcbsp->dev,
- "Unable to create sidetone controls\n");
-
- } else {
- mcbsp->max_tx_thres = -EINVAL;
- mcbsp->max_rx_thres = -EINVAL;
- }
-}
-
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
-{
- if (cpu_is_omap34xx()) {
- omap_additional_remove(mcbsp->dev);
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- omap_st_remove(mcbsp);
- }
-}
-#else
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1316,7 +1217,7 @@
}
}
mcbsp->phys_base = res->start;
- omap_mcbsp_cache_size = resource_size(res);
+ mcbsp->reg_cache_size = resource_size(res);
mcbsp->io_base = ioremap(res->start, resource_size(res));
if (!mcbsp->io_base) {
ret = -ENOMEM;
@@ -1364,15 +1265,52 @@
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
- mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
pm_runtime_enable(mcbsp->dev);
- /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
- omap34xx_device_init(mcbsp);
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (mcbsp->pdata->buffer_size) {
+ /*
+ * Initially configure the maximum thresholds to a safe value.
+ * The McBSP FIFO usage with these values should not go under
+ * 16 locations.
+ * If the whole FIFO without safety buffer is used, than there
+ * is a possibility that the DMA will be not able to push the
+ * new data on time, causing channel shifts in runtime.
+ */
+ mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+ mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
+
+ ret = sysfs_create_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create additional controls\n");
+ goto err_thres;
+ }
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
+ if (res) {
+ ret = omap_st_add(mcbsp, res);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+ goto err_st;
+ }
+ }
return 0;
+err_st:
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+err_thres:
+ clk_put(mcbsp->fclk);
err_res:
iounmap(mcbsp->io_base);
err_ioremap:
@@ -1392,7 +1330,12 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- omap34xx_device_exit(mcbsp);
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+
+ if (mcbsp->st_data)
+ omap_st_remove(mcbsp);
clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 02609ee..26aee5c 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -94,6 +94,9 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
+static int omap_device_register(struct platform_device *pdev);
+static int omap_early_device_register(struct platform_device *pdev);
+
/* Private functions */
/**
@@ -114,7 +117,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +141,24 @@
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev->dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +185,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +208,26 @@
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev->dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -245,28 +245,27 @@
if (!clk_alias || !clk_name)
return;
- pr_debug("omap_device: %s: Creating %s -> %s\n",
- dev_name(&od->pdev.dev), clk_alias, clk_name);
+ dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
- r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
+ r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- pr_warning("omap_device: %s: alias %s already exists\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_warn(&od->pdev->dev,
+ "alias %s already exists\n", clk_alias);
clk_put(r);
return;
}
r = omap_clk_get_by_name(clk_name);
if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), clk_name);
+ dev_err(&od->pdev->dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
return;
}
- l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_err(&od->pdev->dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
return;
}
@@ -343,7 +342,7 @@
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
-int omap_device_count_resources(struct omap_device *od)
+static int omap_device_count_resources(struct omap_device *od)
{
int c = 0;
int i;
@@ -352,7 +351,7 @@
c += omap_hwmod_count_resources(od->hwmods[i]);
pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+ "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
return c;
}
@@ -374,7 +373,8 @@
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
-int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+static int omap_device_fill_resources(struct omap_device *od,
+ struct resource *res)
{
int c = 0;
int i, r;
@@ -405,7 +405,7 @@
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -438,15 +438,15 @@
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device)
{
int ret = -ENOMEM;
+ struct platform_device *pdev;
struct omap_device *od;
- char *pdev_name2;
struct resource *res = NULL;
int i, res_count;
struct omap_hwmod **hwmods;
@@ -457,72 +457,76 @@
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
+ pdev = platform_device_alloc(pdev_name, pdev_id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto odbs_exit;
+ }
+
pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
oh_cnt);
od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
- if (!od)
- return ERR_PTR(-ENOMEM);
-
+ if (!od) {
+ ret = -ENOMEM;
+ goto odbs_exit1;
+ }
od->hwmods_cnt = oh_cnt;
hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
GFP_KERNEL);
if (!hwmods)
- goto odbs_exit1;
+ goto odbs_exit2;
memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
od->hwmods = hwmods;
-
- pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
- if (!pdev_name2)
- goto odbs_exit2;
- strcpy(pdev_name2, pdev_name);
-
- od->pdev.name = pdev_name2;
- od->pdev.id = pdev_id;
+ od->pdev = pdev;
res_count = omap_device_count_resources(od);
if (res_count > 0) {
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto odbs_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto odbs_exit3;
}
- omap_device_fill_resources(od, res);
- od->pdev.num_resources = res_count;
- od->pdev.resource = res;
-
- ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+ ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit4;
+ goto odbs_exit3;
+
+ pdev->archdata.od = od;
+
+ if (is_early_device)
+ ret = omap_early_device_register(pdev);
+ else
+ ret = omap_device_register(pdev);
+ if (ret)
+ goto odbs_exit3;
od->pm_lats = pm_lats;
od->pm_lats_cnt = pm_lats_cnt;
- if (is_early_device)
- ret = omap_early_device_register(od);
- else
- ret = omap_device_register(od);
-
for (i = 0; i < oh_cnt; i++) {
hwmods[i]->od = od;
_add_hwmod_clocks_clkdev(od, hwmods[i]);
}
- if (ret)
- goto odbs_exit4;
+ return pdev;
- return od;
-
-odbs_exit4:
- kfree(res);
odbs_exit3:
- kfree(pdev_name2);
-odbs_exit2:
kfree(hwmods);
-odbs_exit1:
+odbs_exit2:
kfree(od);
+odbs_exit1:
+ platform_device_put(pdev);
+odbs_exit:
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
@@ -538,11 +542,11 @@
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-int omap_early_device_register(struct omap_device *od)
+static int omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
- devices[0] = &(od->pdev);
+ devices[0] = pdev;
early_platform_add_devices(devices, 1);
return 0;
}
@@ -638,13 +642,13 @@
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-int omap_device_register(struct omap_device *od)
+static int omap_device_register(struct platform_device *pdev)
{
- pr_debug("omap_device: %s: registering\n", od->pdev.name);
+ pr_debug("omap_device: %s: registering\n", pdev->name);
- od->pdev.dev.parent = &omap_device_parent;
- od->pdev.dev.pm_domain = &omap_device_pm_domain;
- return platform_device_register(&od->pdev);
+ pdev->dev.parent = &omap_device_parent;
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+ return platform_device_add(pdev);
}
@@ -671,8 +675,9 @@
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -710,8 +715,9 @@
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -742,8 +748,9 @@
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
deleted file mode 100644
index bd534d3..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/map.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-#define S3C_UART_OFFSET (0x4000)
-
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_IIS SZ_1M
-#define S3C24XX_SZ_ADC SZ_1M
-#define S3C24XX_SZ_SPI SZ_1M
-#define S3C24XX_SZ_SDI SZ_1M
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
-
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fad..ebc142c 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -72,7 +72,6 @@
mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
- kdiv = pll_con1 & PLL46XX_KDIV_MASK;
if (pll_type == pll_4650c)
kdiv = pll_con1 & PLL4650C_KDIV_MASK;
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index db7a65c..06825c4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -58,22 +58,5 @@
void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index 2497321..4524ef4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -58,22 +58,5 @@
void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index f60aedb..9cede96 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -59,22 +59,5 @@
void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index ede776f..0358ef4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -62,22 +62,5 @@
void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 82543f0..5f3d46a 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -43,8 +43,17 @@
.resource = s3c_ts_resource,
};
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
+ if (!pd)
+ pd = &default_ts_data;
+
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
&s3c_device_ts);
}
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 336d5ac..ab9bce6 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -18,11 +18,6 @@
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
-struct s3c24xx_dma_addr {
- unsigned long from;
- unsigned long to;
-};
-
/* struct s3c24xx_dma_map
*
* this holds the mapping information for the channel selected
@@ -31,7 +26,6 @@
struct s3c24xx_dma_map {
const char *name;
- struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
new file mode 100644
index 0000000..7d04875
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C24XX_VA_UART S3C_VA_UART
+
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_PA_UART S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET (0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/map-s5p.h
rename to arch/arm/plat-samsung/include/plat/map-s5p.h
index 36d3551..c2d7bda 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
@@ -40,8 +40,6 @@
#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
-#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
@@ -58,4 +56,6 @@
#define S3C_UART_OFFSET (0x400)
#endif
+#include <plat/map-s3c.h>
+
#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 058e096..4a65520 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -86,6 +86,13 @@
struct mmc_card *card);
};
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set);
+
/**
* s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
* @pd: Platform data to register to device.
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 7cf2e1e..6de1a38 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <plat/devs.h>
+#include <plat/sdhci.h>
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
@@ -35,3 +36,24 @@
pdev->dev.platform_data = npd;
return npd;
}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set)
+{
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->max_width)
+ set->max_width = pd->max_width;
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
+}
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 79bcb43..0cbd5a0 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/signal.h>
@@ -68,7 +69,7 @@
/*
* Force a reload of the VFP context from the thread structure. We do
* this by ensuring that access to the VFP hardware is disabled, and
- * clear last_VFP_context. Must be called from non-preemptible context.
+ * clear vfp_current_hw_state. Must be called from non-preemptible context.
*/
static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
{
@@ -436,9 +437,7 @@
set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
}
-#ifdef CONFIG_PM
-#include <linux/syscore_ops.h>
-
+#ifdef CONFIG_CPU_PM
static int vfp_pm_suspend(void)
{
struct thread_info *ti = current_thread_info();
@@ -468,19 +467,33 @@
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
}
-static struct syscore_ops vfp_pm_syscore_ops = {
- .suspend = vfp_pm_suspend,
- .resume = vfp_pm_resume,
+static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
+ void *v)
+{
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ vfp_pm_suspend();
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ vfp_pm_resume();
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block vfp_cpu_pm_notifier_block = {
+ .notifier_call = vfp_cpu_pm_notifier,
};
static void vfp_pm_init(void)
{
- register_syscore_ops(&vfp_pm_syscore_ops);
+ cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
}
#else
static inline void vfp_pm_init(void) { }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_CPU_PM */
/*
* Ensure that the VFP state stored in 'thread->vfpstate' is up to date
diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h
new file mode 100644
index 0000000..455b233
--- /dev/null
+++ b/include/linux/cpu_pm.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_CPU_PM_H
+#define _LINUX_CPU_PM_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+/*
+ * When a CPU goes to a low power state that turns off power to the CPU's
+ * power domain, the contents of some blocks (floating point coprocessors,
+ * interrupt controllers, caches, timers) in the same power domain can
+ * be lost. The cpm_pm notifiers provide a method for platform idle, suspend,
+ * and hotplug implementations to notify the drivers for these blocks that
+ * they may be reset.
+ *
+ * All cpu_pm notifications must be called with interrupts disabled.
+ *
+ * The notifications are split into two classes: CPU notifications and CPU
+ * cluster notifications.
+ *
+ * CPU notifications apply to a single CPU and must be called on the affected
+ * CPU. They are used to save per-cpu context for affected blocks.
+ *
+ * CPU cluster notifications apply to all CPUs in a single power domain. They
+ * are used to save any global context for affected blocks, and must be called
+ * after all the CPUs in the power domain have been notified of the low power
+ * state.
+ */
+
+/*
+ * Event codes passed as unsigned long val to notifier calls
+ */
+enum cpu_pm_event {
+ /* A single cpu is entering a low power state */
+ CPU_PM_ENTER,
+
+ /* A single cpu failed to enter a low power state */
+ CPU_PM_ENTER_FAILED,
+
+ /* A single cpu is exiting a low power state */
+ CPU_PM_EXIT,
+
+ /* A cpu power domain is entering a low power state */
+ CPU_CLUSTER_PM_ENTER,
+
+ /* A cpu power domain failed to enter a low power state */
+ CPU_CLUSTER_PM_ENTER_FAILED,
+
+ /* A cpu power domain is exiting a low power state */
+ CPU_CLUSTER_PM_EXIT,
+};
+
+#ifdef CONFIG_CPU_PM
+int cpu_pm_register_notifier(struct notifier_block *nb);
+int cpu_pm_unregister_notifier(struct notifier_block *nb);
+int cpu_pm_enter(void);
+int cpu_pm_exit(void);
+int cpu_cluster_pm_enter(void);
+int cpu_cluster_pm_exit(void);
+
+#else
+
+static inline int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_pm_exit(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_exit(void)
+{
+ return 0;
+}
+#endif
+#endif
diff --git a/kernel/Makefile b/kernel/Makefile
index eca595e..988cb3d 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -101,6 +101,7 @@
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
+obj-$(CONFIG_CPU_PM) += cpu_pm.o
obj-$(CONFIG_PERF_EVENTS) += events/
diff --git a/kernel/cpu_pm.c b/kernel/cpu_pm.c
new file mode 100644
index 0000000..249152e
--- /dev/null
+++ b/kernel/cpu_pm.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+
+static DEFINE_RWLOCK(cpu_pm_notifier_lock);
+static RAW_NOTIFIER_HEAD(cpu_pm_notifier_chain);
+
+static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls)
+{
+ int ret;
+
+ ret = __raw_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL,
+ nr_to_call, nr_calls);
+
+ return notifier_to_errno(ret);
+}
+
+/**
+ * cpu_pm_register_notifier - register a driver with cpu_pm
+ * @nb: notifier block to register
+ *
+ * Add a driver to a list of drivers that are notified about
+ * CPU and CPU cluster low power entry and exit.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_register.
+ */
+int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_register(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
+
+/**
+ * cpu_pm_unregister_notifier - unregister a driver with cpu_pm
+ * @nb: notifier block to be unregistered
+ *
+ * Remove a driver from the CPU PM notifier list.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_unregister.
+ */
+int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_unregister(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier);
+
+/**
+ * cpm_pm_enter - CPU low power entry notifier
+ *
+ * Notifies listeners that a single CPU is entering a low power state that may
+ * cause some blocks in the same power domain as the cpu to reset.
+ *
+ * Must be called on the affected CPU with interrupts disabled. Platform is
+ * responsible for ensuring that cpu_pm_enter is not called twice on the same
+ * CPU before cpu_pm_exit is called. Notified drivers can include VFP
+ * co-processor, interrupt controller and it's PM extensions, local CPU
+ * timers context save/restore which shouldn't be interrupted. Hence it
+ * must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU PM
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_enter);
+
+/**
+ * cpm_pm_exit - CPU low power exit notifier
+ *
+ * Notifies listeners that a single CPU is exiting a low power state that may
+ * have caused some blocks in the same power domain as the cpu to reset.
+ *
+ * Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_exit);
+
+/**
+ * cpm_cluster_pm_enter - CPU cluster low power entry notifier
+ *
+ * Notifies listeners that all cpus in a power domain are entering a low power
+ * state that may cause some blocks in the same power domain to reset.
+ *
+ * Must be called after cpu_pm_enter has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU cluster
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_CLUSTER_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_enter);
+
+/**
+ * cpm_cluster_pm_exit - CPU cluster low power exit notifier
+ *
+ * Notifies listeners that all cpus in a power domain are exiting form a
+ * low power state that may have caused some blocks in the same power domain
+ * to reset.
+ *
+ * Must be called after cpu_pm_exit has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_exit);
+
+#ifdef CONFIG_PM
+static int cpu_pm_suspend(void)
+{
+ int ret;
+
+ ret = cpu_pm_enter();
+ if (ret)
+ return ret;
+
+ ret = cpu_cluster_pm_enter();
+ return ret;
+}
+
+static void cpu_pm_resume(void)
+{
+ cpu_cluster_pm_exit();
+ cpu_pm_exit();
+}
+
+static struct syscore_ops cpu_pm_syscore_ops = {
+ .suspend = cpu_pm_suspend,
+ .resume = cpu_pm_resume,
+};
+
+static int cpu_pm_init(void)
+{
+ register_syscore_ops(&cpu_pm_syscore_ops);
+ return 0;
+}
+core_initcall(cpu_pm_init);
+#endif
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 0f85778..fbe38f2 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5758,6 +5758,7 @@
pmu = idr_find(&pmu_idr, event->attr.type);
rcu_read_unlock();
if (pmu) {
+ event->pmu = pmu;
ret = pmu->event_init(event);
if (ret)
pmu = ERR_PTR(ret);
@@ -5765,6 +5766,7 @@
}
list_for_each_entry_rcu(pmu, &pmus, entry) {
+ event->pmu = pmu;
ret = pmu->event_init(event);
if (!ret)
goto unlock;
@@ -5891,8 +5893,6 @@
return ERR_PTR(err);
}
- event->pmu = pmu;
-
if (!event->parent) {
if (event->attach_state & PERF_ATTACH_TASK)
jump_label_inc(&perf_sched_events);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 3744c59..80a8597 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -235,3 +235,7 @@
config PM_GENERIC_DOMAINS_RUNTIME
def_bool y
depends on PM_RUNTIME && PM_GENERIC_DOMAINS
+
+config CPU_PM
+ bool
+ depends on SUSPEND || CPU_IDLE