IB/qib: Hold link for TX SERDES settings
Hold the IB link at DISABLED until we get the correct TX settings
on mezz boards.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 50cceb3..b01809a 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -623,7 +623,6 @@
u8 ibmalfusesnap;
struct qib_qsfp_data qsfp_data;
char epmsgbuf[192]; /* for port error interrupt msg buffer */
- u8 bounced;
};
static struct {
@@ -1881,23 +1880,7 @@
IB_PHYSPORTSTATE_DISABLED)
qib_set_ib_7322_lstate(ppd, 0,
QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
- else {
- u32 lstate;
- /*
- * We need the current logical link state before
- * lflags are set in handle_e_ibstatuschanged.
- */
- lstate = qib_7322_iblink_state(ibcs);
-
- if (IS_QMH(dd) && !ppd->cpspec->bounced &&
- ltstate == IB_PHYSPORTSTATE_LINKUP &&
- (lstate >= IB_PORT_INIT &&
- lstate <= IB_PORT_ACTIVE)) {
- ppd->cpspec->bounced = 1;
- qib_7322_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE,
- IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL);
- }
-
+ else
/*
* Since going into a recovery state causes the link
* state to go down and since recovery is transitory,
@@ -1911,7 +1894,6 @@
ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
qib_handle_e_ibstatuschanged(ppd, ibcs);
- }
}
if (*msg && iserr)
qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
@@ -2381,6 +2363,11 @@
qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+ /* Hold the link state machine for mezz boards */
+ if (IS_QMH(dd) || IS_QME(dd))
+ qib_set_ib_7322_lstate(ppd, 0,
+ QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+
/* Also enable IBSTATUSCHG interrupt. */
val = qib_read_kreg_port(ppd, krp_errmask);
qib_write_kreg_port(ppd, krp_errmask,
@@ -5702,6 +5689,11 @@
ppd->cpspec->h1_val = h1;
/* now change the IBC and serdes, overriding generic */
init_txdds_table(ppd, 1);
+ /* Re-enable the physical state machine on mezz boards
+ * now that the correct settings have been set. */
+ if (IS_QMH(dd) || IS_QME(dd))
+ qib_set_ib_7322_lstate(ppd, 0,
+ QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
any++;
}
if (*nxt == '\n')