Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / d7867959e7e928ab52ef204e2559937e5c9fc4ce / . / drivers / media / video / bttv-cards.c
blob: 3413bace443a6a06da2d0de1a4db9aad6c82d017 [file] [log] [blame]
/*
bttv-cards.c
this file has configuration informations - card-specific stuff
like the big tvcards array for the most part
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
& Marcus Metzler (mocm@thp.uni-koeln.de)
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/firmware.h>
#include <asm/io.h>
#include "bttvp.h"
/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
static void boot_bt832(struct bttv *btv);
static void hauppauge_eeprom(struct bttv *btv);
static void avermedia_eeprom(struct bttv *btv);
static void osprey_eeprom(struct bttv *btv);
static void modtec_eeprom(struct bttv *btv);
static void init_PXC200(struct bttv *btv);
static void init_RTV24(struct bttv *btv);
static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
int set);
static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
int set);
static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
static void rv605_muxsel(struct bttv *btv, unsigned int input);
static void eagle_muxsel(struct bttv *btv, unsigned int input);
static void xguard_muxsel(struct bttv *btv, unsigned int input);
static void ivc120_muxsel(struct bttv *btv, unsigned int input);
static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
static void PXC200_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_init(struct bttv *btv);
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
static void tibetCS16_init(struct bttv *btv);
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
static void kodicom4400r_init(struct bttv *btv);
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea5757_read(struct bttv *btv);
static int tea5757_write(struct bttv *btv, int value);
static void identify_by_eeprom(struct bttv *btv,
unsigned char eeprom_data[256]);
static int __devinit pvr_boot(struct bttv *btv);
/* config variables */
static unsigned int triton1=0;
static unsigned int vsfx=0;
static unsigned int latency = UNSET;
int no_overlay=-1;
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
#ifdef MODULE
static unsigned int autoload = 1;
#else
static unsigned int autoload = 0;
#endif
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
/* insmod options */
module_param(triton1, int, 0444);
module_param(vsfx, int, 0444);
module_param(no_overlay, int, 0444);
module_param(latency, int, 0444);
module_param(gpiomask, int, 0444);
module_param(audioall, int, 0444);
module_param(autoload, int, 0444);
module_param_array(card, int, NULL, 0444);
module_param_array(pll, int, NULL, 0444);
module_param_array(tuner, int, NULL, 0444);
module_param_array(svhs, int, NULL, 0444);
module_param_array(remote, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
"[enable bug compatibility for triton1 + others]");
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
"[yet another chipset flaw workaround]");
MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */
static struct CARD {
unsigned id;
int cardnr;
char *name;
} cards[] __devinitdata = {
{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
{ 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
{ 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
{ 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
{ 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
{ 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
{ 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
{ 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
{ 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
{ 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
{ 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
{ 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
{ 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
/* some cards ship with byteswapped IDs ... */
{ 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
{ 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
/* this seems to happen as well ... */
{ 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
{ 0x3000121a, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
{ 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
{ 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
{ 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
{ 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
{ 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
{ 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
{ 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
{ 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
{ 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
{ 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
/* clashes with FlyVideo
*{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
{ 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
{ 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
{ 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
{ 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
{ 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
{ 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
{ 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
{ 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
{ 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
{ 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
{ 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
{ 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
{ 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
{ 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
{ 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
{ 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
{ 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
{ 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
{ 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
{ 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
{ 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
{ 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
{ 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
{ 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
{ 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
{ 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
{ 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
{ 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
{ 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
/* likely broken, vendor id doesn't match the other magic views ...
* { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
/* DVB cards (using pci function .1 for mpeg data xfer) */
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
{ 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
{ 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
{ 0, -1, NULL }
};
/* ----------------------------------------------------------------------- */
/* array with description for bt848 / bt878 tv/grabber cards */
struct tvcard bttv_tvcards[] = {
/* ---- card 0x00 ---------------------------------- */
[BTTV_BOARD_UNKNOWN] = {
.name = " *** UNKNOWN/GENERIC *** ",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MIRO] = {
.name = "MIRO PCTV",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 2, 0, 0, 0, 10},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_HAUPPAUGE] = {
.name = "Hauppauge (bt848)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 1, 2, 3, 4},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_STB] = {
.name = "STB, Gateway P/N 6000699 (bt848)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 4, 0, 2, 3, 1},
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* ---- card 0x04 ---------------------------------- */
[BTTV_BOARD_INTEL] = {
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = 2,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = 4,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_DIAMOND] = {
.name = "Diamond DTV2000",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 3,
.muxsel = { 2, 3, 1, 0},
.audiomux = { 0, 1, 0, 1, 3},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_AVERMEDIA] = {
.name = "AVerMedia TVPhone",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.muxsel = { 2, 3, 1, 1},
.gpiomask = 0x0f,
.audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
/* 0x04 for some cards ?? */
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = avermedia_tvphone_audio,
.has_remote = 1,
},
[BTTV_BOARD_MATRIX_VISION] = {
.name = "MATRIX-Vision MV-Delta",
.video_inputs = 5,
.audio_inputs = 1,
.tuner = -1,
.svhs = 3,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 0, 0},
.audiomux = {0 },
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x08 ---------------------------------- */
[BTTV_BOARD_FLYVIDEO] = {
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xc00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TURBOTV] = {
.name = "IMS/IXmicro TurboTV",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 3,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 1, 1, 2, 3, 0},
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_HAUPPAUGE878] = {
.name = "Hauppauge (bt878)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x0f, /* old: 7 */
.muxsel = { 2, 0, 1, 1},
.audiomux = { 0, 1, 2, 3, 4},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MIROPRO] = {
.name = "MIRO PCTV pro",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x3014f,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x20001,0x10001, 0, 0,10},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x0c ---------------------------------- */
[BTTV_BOARD_ADSTECH_TV] = {
.name = "ADS Technologies Channel Surfer TV (bt848)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 13, 14, 11, 7, 0, 0},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_AVERMEDIA98] = {
.name = "AVerMedia TVCapture 98",
.video_inputs = 3,
.audio_inputs = 4,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 13, 14, 11, 7, 0, 0},
.needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = avermedia_tv_stereo_audio,
.no_gpioirq = 1,
},
[BTTV_BOARD_VHX] = {
.name = "Aimslab Video Highway Xtreme (VHX)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ZOLTRIX] = {
.name = "Zoltrix TV-Max",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = {0 , 0, 1 , 0, 10},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x10 ---------------------------------- */
[BTTV_BOARD_PIXVIEWPLAYTV] = {
.name = "Prolink Pixelview PlayTV (bt878)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x01fe00,
.muxsel = { 2, 3, 1, 1},
#if 0
/* old */
.audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
#else
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
#endif
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
},
[BTTV_BOARD_WINVIEW_601] = {
.name = "Leadtek WinView 601",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x8300f8,
.muxsel = { 2, 3, 1, 1,0},
.audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = winview_audio,
.has_radio = 1,
},
[BTTV_BOARD_AVEC_INTERCAP] = {
.name = "AVEC Intercapture",
.video_inputs = 3,
.audio_inputs = 2,
.tuner = 0,
.svhs = 2,
.gpiomask = 0,
.muxsel = {2, 3, 1, 1},
.audiomux = {1, 0, 0, 0, 0},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_LIFE_FLYKIT] = {
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = -1,
.svhs = -1,
.gpiomask = 0x8dff00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0 },
.no_msp34xx = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x14 ---------------------------------- */
[BTTV_BOARD_CEI_RAFFLES] = {
.name = "CEI Raffles Card",
.video_inputs = 3,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.muxsel = {2, 3, 1, 1},
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_CONFERENCETV] = {
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
.video_inputs = 4,
.audio_inputs = 2, /* tuner, line in */
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_PHOEBE_TVMAS] = {
.name = "Askey CPH050/ Phoebe Tv Master + FM",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xc00,
.muxsel = { 2, 3, 1, 1},
.audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MODTEC_205] = {
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 7,
.muxsel = { 2, 3, -1 },
.digital_mode = DIGITAL_MODE_CAMERA,
.audiomux = { 0, 0, 0, 0, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x18 ---------------------------------- */
[BTTV_BOARD_MAGICTVIEW061] = {
.name = "Askey CPH05X/06X (bt878) [many vendors]",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xe00,
.muxsel = { 2, 3, 1, 1},
.audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_VOBIS_BOOSTAR] = {
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1f0fff,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = terratv_audio,
},
[BTTV_BOARD_HAUPPAUG_WCAM] = {
.name = "Hauppauge WinCam newer (bt878)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 7,
.muxsel = { 2, 0, 1, 1},
.audiomux = { 0, 1, 2, 3, 4},
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MAXI] = {
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
.video_inputs = 4,
.audio_inputs = 2,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_SECAM,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x1c ---------------------------------- */
[BTTV_BOARD_TERRATV] = {
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1f0fff,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = terratv_audio,
/* GPIO wiring:
External 20 pin connector (for Active Radio Upgrade board)
gpio00: i2c-sda
gpio01: i2c-scl
gpio02: om5610-data
gpio03: om5610-clk
gpio04: om5610-wre
gpio05: om5610-stereo
gpio06: rds6588-davn
gpio07: Pin 7 n.c.
gpio08: nIOW
gpio09+10: nIOR, nSEL ?? (bt878)
gpio09: nIOR (bt848)
gpio10: nSEL (bt848)
Sound Routing:
gpio16: u2-A0 (1st 4052bt)
gpio17: u2-A1
gpio18: u2-nEN
gpio19: u4-A0 (2nd 4052)
gpio20: u4-A1
u4-nEN - GND
Btspy:
00000 : Cdrom (internal audio input)
10000 : ext. Video audio input
20000 : TV Mono
a0000 : TV Mono/2
1a0000 : TV Stereo
30000 : Radio
40000 : Mute
*/
},
[BTTV_BOARD_PXC200] = {
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
.name = "Imagenation PXC200",
.video_inputs = 5,
.audio_inputs = 1,
.tuner = -1,
.svhs = 1, /* was: 4 */
.gpiomask = 0,
.muxsel = { 2, 3, 1, 0, 0},
.audiomux = { 0 },
.needs_tvaudio = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
},
[BTTV_BOARD_FLYVIDEO_98] = {
.name = "Lifeview FlyVideo 98 LR50",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800, /* 0x8dfe00 */
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_IPROTV] = {
.name = "Formac iProTV, Formac ProTV I (bt848)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 1,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 1, 0, 0, 0, 0 },
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x20 ---------------------------------- */
[BTTV_BOARD_INTEL_C_S_PCI] = {
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = 2,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = 4,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVALUE] = {
.name = "Terratec TerraTValue Version Bt878",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xffff00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_WINFAST2000] = {
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
#if 0
.gpiomask = 0xc33000,
.audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
#else
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
.gpiomask = 0xb33000,
.audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
#endif
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
gpio23 -- hef4052:nEnable (0x800000)
gpio12 -- hef4052:A1
gpio13 -- hef4052:A0
0x0000: external audio
0x1000: FM
0x2000: TV
0x3000: n.c.
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
.needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
.tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = winfast2000_audio,
.has_remote = 1,
},
[BTTV_BOARD_CHRONOS_VS2] = {
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
.video_inputs = 4,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x24 ---------------------------------- */
[BTTV_BOARD_TYPHOON_TVIEW] = {
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
.video_inputs = 4,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_PXELVWPLTVPRO] = {
.name = "Prolink PixelView PlayTV pro",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xff,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MAGICTVIEW063] = {
.name = "Askey CPH06X TView99",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x551e00,
.muxsel = { 2, 3, 1, 0},
.audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = 1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_PINNACLE] = {
.name = "Pinnacle PCTV Studio/Rave",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x03000F,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 2, 0xd0001, 0, 0, 1},
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x28 ---------------------------------- */
[BTTV_BOARD_STB2] = {
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 4, 0, 2, 3, 1},
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_AVPHONE98] = {
.name = "AVerMedia TVPhone 98",
.video_inputs = 3,
.audio_inputs = 4,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 13, 4, 11, 7, 0, 0},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
.audio_hook = avermedia_tvphone_audio,
},
[BTTV_BOARD_PV951] = {
.name = "ProVideo PV951", /* pic16c54 */
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0, 0, 0, 0},
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ONAIR_TV] = {
.name = "Little OnAir TV",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xe00b,
.muxsel = {2, 3, 1, 1},
.audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
.no_msp34xx = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x2c ---------------------------------- */
[BTTV_BOARD_SIGMA_TVII_FM] = {
.name = "Sigma TVII-FM",
.video_inputs = 2,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 3,
.muxsel = {2, 3, 1, 1},
.audiomux = {1, 1, 0, 2, 3},
.no_msp34xx = 1,
.pll = PLL_NONE,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MATRIX_VISION2] = {
.name = "MATRIX-Vision MV-Delta 2",
.video_inputs = 5,
.audio_inputs = 1,
.tuner = -1,
.svhs = 3,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 0, 0},
.audiomux = {0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ZOLTRIX_GENIE] = {
.name = "Zoltrix Genie TV/FM",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xbcf03f,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 21,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVRADIO] = {
.name = "Terratec TV/Radio+",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x70000,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = 1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
},
/* ---- card 0x30 ---------------------------------- */
[BTTV_BOARD_DYNALINK] = {
.name = "Askey CPH03x/ Dynalink Magic TView",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = {2,0,0,0,1},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_GVBCTV3PCI] = {
.name = "IODATA GV-BCTV3/PCI",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x010f00,
.muxsel = {2, 3, 0, 0},
.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = gvbctv3pci_audio,
},
[BTTV_BOARD_PXELVWPLTVPAK] = {
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
.video_inputs = 5,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 0xAA0000,
.muxsel = { 2,3,1,1,-1 },
.digital_mode = DIGITAL_MODE_CAMERA,
.audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring: (different from Rev.4C !)
GPIO17: U4.A0 (first hef4052bt)
GPIO19: U4.A1
GPIO20: U5.A1 (second hef4052bt)
GPIO21: U4.nEN
GPIO22: BT832 Reset Line
GPIO23: A5,A0, U5,nEN
Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
*/
},
[BTTV_BOARD_EAGLE] = {
.name = "Eagle Wireless Capricorn2 (bt878A)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 0, 1, 1},
.audiomux = { 0, 1, 2, 3, 4},
.pll = PLL_28,
.tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x34 ---------------------------------- */
[BTTV_BOARD_PINNACLEPRO] = {
/* David Härdeman <david@2gen.com> */
.name = "Pinnacle PCTV Studio Pro",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 0x03000F,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 1, 0xd0001, 0, 0, 10},
/* sound path (5 sources):
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
0= ext. Audio IN
1= from MUX2
2= Mono TV sound from Tuner
3= not connected
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TVIEW_RDS_FM] = {
/* Claas Langbehn <claas@bigfoot.com>,
Sven Grothklags <sven@upb.de> */
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
.video_inputs = 4,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1c,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0, 0x10, 8, 4 },
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_LIFETEC_9415] = {
/* Tim Röstermundt <rosterm@uni-muenster.de>
in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
options tuner type=5 */
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x18e0,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
/* For cards with tda9820/tda9821:
0x0000: Tuner normal stereo
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
0x0880: Tuner A2 stereo */
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_BESTBUY_EASYTV] = {
/* Miguel Angel Alvarez <maacruz@navegalia.com>
old Easy TV BT848 version (model CPH031) */
.name = "Askey CPH031/ BESTBUY Easy TV",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xF,
.muxsel = { 2, 3, 1, 0},
.audiomux = { 2, 0, 0, 0, 10},
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x38 ---------------------------------- */
[BTTV_BOARD_FLYVIDEO_98FM] = {
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
.name = "Lifeview FlyVideo 98FM LR50",
.video_inputs = 4,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
.pll = PLL_28,
.tuner_type = 5,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* This is the ultimate cheapo capture card
* just a BT848A on a small PCB!
* Steve Hosgood <steve@equiinet.com> */
[BTTV_BOARD_GRANDTEC] = {
.name = "GrandTec 'Grand Video Capture' (Bt848)",
.video_inputs = 2,
.audio_inputs = 0,
.tuner = -1,
.svhs = 1,
.gpiomask = 0,
.muxsel = { 3, 1 },
.audiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ASKEY_CPH060] = {
/* Daniel Herrington <daniel.herrington@home.com> */
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xe00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ASKEY_CPH03X] = {
/* Matti Mottus <mottus@physic.ut.ee> */
.name = "Askey CPH03x TV Capturer",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x03000F,
.muxsel = { 2, 3, 1, 0},
.audiomux = { 2,0,0,0,1 },
.pll = PLL_28,
.tuner_type = 0,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x3c ---------------------------------- */
[BTTV_BOARD_MM100PCTV] = {
/* Philip Blundell <philb@gnu.org> */
.name = "Modular Technology MM100PCTV",
.video_inputs = 2,
.audio_inputs = 2,
.tuner = 0,
.svhs = -1,
.gpiomask = 11,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 2, 0, 0, 1, 8},
.pll = PLL_35,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_GMV1] = {
/* Adrian Cox <adrian@humboldt.co.uk */
.name = "AG Electronics GMV1",
.video_inputs = 2,
.audio_inputs = 0,
.tuner = -1,
.svhs = 1,
.gpiomask = 0xF,
.muxsel = { 2, 2},
.audiomux = { },
.no_msp34xx = 1,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_BESTBUY_EASYTV2] = {
/* Miguel Angel Alvarez <maacruz@navegalia.com>
new Easy TV BT878 version (model CPH061)
special thanks to Informatica Mieres for providing the card */
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
.video_inputs = 3,
.audio_inputs = 2,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xFF,
.muxsel = { 2, 3, 1, 0},
.audiomux = { 1, 0, 4, 4, 9},
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ATI_TVWONDER] = {
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xf03f,
.muxsel = { 2, 3, 1, 0 },
.audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x40 ---------------------------------- */
[BTTV_BOARD_ATI_TVWONDERVE] = {
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder VE",
.video_inputs = 2,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 1,
.muxsel = { 2, 3, 0, 1},
.audiomux = { 0, 0, 1, 0, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_FLYVIDEO2000] = {
/* DeeJay <deejay@westel900.net (2000S) */
.name = "Lifeview FlyVideo 2000S LR90",
.video_inputs = 3,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x18e0,
.muxsel = { 2, 3, 0, 1},
/* Radio changed from 1e80 to 0x800 to make
FlyVideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
.audio_hook = fv2000s_audio,
.no_msp34xx = 1,
.no_tda9875 = 1,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = 5,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVALUER] = {
.name = "Terratec TValueRadio",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0xffff00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_GVBCTV4PCI] = {
/* TANAKA Kei <peg00625@nifty.com> */
.name = "IODATA GV-BCTV4/PCI",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x010f00,
.muxsel = {2, 3, 0, 0},
.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = gvbctv3pci_audio,
},
/* ---- card 0x44 ---------------------------------- */
[BTTV_BOARD_VOODOOTV_FM] = {
.name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
.audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
.muxsel = { 2, 3 ,0 ,1},
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_AIMMS] = {
/* Philip Blundell <pb@nexus.co.uk> */
.name = "Active Imaging AIMMS",
.video_inputs = 1,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.muxsel = { 2 },
.gpiomask = 0
},
[BTTV_BOARD_PV_BT878P_PLUS] = {
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
.video_inputs = 3,
.audio_inputs = 4,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = 25,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring:
GPIO0: U4.A0 (hef4052bt)
GPIO1: U4.A1
GPIO2: U4.A1 (second hef4052bt)
GPIO3: U4.nEN, U5.A0, A5.nEN
GPIO8-15: vrd866b ?
*/
},
[BTTV_BOARD_FLYVIDEO98EZ] = {
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = 2,
.muxsel = { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
.pll = PLL_28,
.no_msp34xx = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x48 ---------------------------------- */
[BTTV_BOARD_PV_BT878P_9B] = {
/* Dariusz Kowalewski <darekk@automex.pl> */
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x3f,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
.needs_tvaudio = 1,
.no_msp34xx = 1,
.no_tda9875 = 1,
.pll = PLL_28,
.tuner_type = 5,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
.has_radio = 1, /* Note: not all cards have radio */
.has_remote = 1,
/* GPIO wiring:
GPIO0: A0 hef4052
GPIO1: A1 hef4052
GPIO3: nEN hef4052
GPIO8-15: vrd866b
GPIO20,22,23: R30,R29,R28
*/
},
[BTTV_BOARD_SENSORAY311] = {
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
/* you must jumper JP5 for the card to work */
.name = "Sensoray 311",
.video_inputs = 5,
.audio_inputs = 0,
.tuner = -1,
.svhs = 4,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 0, 0},
.audiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_RV605] = {
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
.name = "RemoteVision MX (RV605)",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0x00,
.gpiomask2 = 0x07ff,
.muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
.no_msp34xx = 1,
.no_tda9875 = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.muxsel_hook = rv605_muxsel,
},
[BTTV_BOARD_POWERCLR_MTV878] = {
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
.video_inputs = 3,
.audio_inputs = 2,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
.muxsel = { 2, 1, 1, },
.audiomux = { 0, 1, 2, 2, 4 },
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* ---- card 0x4c ---------------------------------- */
[BTTV_BOARD_WINDVR] = {
/* Masaki Suzuki <masaki@btree.org> */
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x140007,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0, 1, 2, 3, 4, 0 },
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = windvr_audio,
},
[BTTV_BOARD_GRANDTEC_MULTI] = {
.name = "GrandTec Multi Capture Card (Bt878)",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 0 },
.audiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_KWORLD] = {
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
.video_inputs = 4,
.audio_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
.audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
* This card lacks external Audio In, so we mute it on Ext. & Int.
* The PCB can take a sbx1637/sbx1673, wiring unknown.
* This card lacks PCI subsystem ID, sigh.
* audiomux=1: lower volume, 2+3: mute
* btwincap uses 0x80000/0x80003
*/
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 5,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
radio signal strength indicators work fine. */
.has_radio = 1,
/* GPIO Info:
GPIO0,1: HEF4052 A0,A1
GPIO2: HEF4052 nENABLE
GPIO3-7: n.c.
GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
GPIO14,15: ??
GPIO16-21: n.c.
GPIO22,23: ??
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
},
[BTTV_BOARD_DSP_TCVIDEO] = {
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
.name = "DSP Design TCVIDEO",
.video_inputs = 4,
.svhs = -1,
.muxsel = { 2, 3, 1, 0},
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x50 ---------------------------------- */
[BTTV_BOARD_HAUPPAUGEPVR] = {
.name = "Hauppauge WinTV PVR",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 0, 1, 1},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask = 7,
.audiomux = {7},
},
[BTTV_BOARD_GVBCTV5PCI] = {
.name = "IODATA GV-BCTV5/PCI",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x0f0f80,
.muxsel = {2, 3, 1, 0},
.audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = gvbctv5pci_audio,
.has_radio = 1,
},
[BTTV_BOARD_OSPREY1x0] = {
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
.video_inputs = 4, /* id-inputs-clock */
.audio_inputs = 0,
.tuner = -1,
.svhs = 3,
.muxsel = { 3, 2, 0, 1 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY1x0_848] = {
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
.video_inputs = 3,
.audio_inputs = 0,
.tuner = -1,
.svhs = 2,
.muxsel = { 2, 3, 1 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
/* ---- card 0x54 ---------------------------------- */
[BTTV_BOARD_OSPREY101_848] = {
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
.video_inputs = 2,
.audio_inputs = 0,
.tuner = -1,
.svhs = 1,
.muxsel = { 3, 1 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY1x1] = {
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
.video_inputs = 1,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.muxsel = { 0 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY1x1_SVID] = {
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
.video_inputs = 2,
.audio_inputs = 0,
.tuner = -1,
.svhs = 1,
.muxsel = { 0, 1 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY2xx] = {
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
.video_inputs = 1,
.audio_inputs = 1,
.tuner = -1,
.svhs = -1,
.muxsel = { 0 },
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
/* ---- card 0x58 ---------------------------------- */
[BTTV_BOARD_OSPREY2x0_SVID] = {
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
.video_inputs = 2,
.audio_inputs = 1,
.tuner = -1,
.svhs = 1,
.muxsel = { 0, 1 },
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY2x0] = {
.name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
.video_inputs = 2,
.audio_inputs = 1,
.tuner = -1,
.svhs = 1,
.muxsel = { 2, 3 },
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY500] = {
.name = "Osprey 500", /* 500 */
.video_inputs = 2,
.audio_inputs = 1,
.tuner = -1,
.svhs = 1,
.muxsel = { 2, 3 },
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY540] = {
.name = "Osprey 540", /* 540 */
.video_inputs = 4,
.audio_inputs = 1,
.tuner = -1,
#if 0 /* TODO ... */
.svhs = OSPREY540_SVID_ANALOG,
.muxsel = { [OSPREY540_COMP_ANALOG] = 2,
[OSPREY540_SVID_ANALOG] = 3, },
#endif
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
#if 0 /* TODO ... */
.muxsel_hook = osprey_540_muxsel,
.picture_hook = osprey_540_set_picture,
#endif
},
/* ---- card 0x5C ---------------------------------- */
[BTTV_BOARD_OSPREY2000] = {
.name = "Osprey 2000", /* 2000 */
.video_inputs = 2,
.audio_inputs = 1,
.tuner = -1,
.svhs = 1,
.muxsel = { 2, 3 },
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
},
[BTTV_BOARD_IDS_EAGLE] = {
/* M G Berberich <berberic@forwiss.uni-passau.de> */
.name = "IDS Eagle",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = -1,
.gpiomask = 0,
.muxsel = { 0, 1, 2, 3 },
.muxsel_hook = eagle_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
.pll = PLL_28,
},
[BTTV_BOARD_PINNACLESAT] = {
.name = "Pinnacle PCTV Sat",
.video_inputs = 2,
.audio_inputs = 0,
.svhs = 1,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.muxsel = { 3, 0, 1, 2},
.pll = PLL_28,
.no_gpioirq = 1,
.has_dvb = 1,
},
[BTTV_BOARD_FORMAC_PROTV] = {
.name = "Formac ProTV II (bt878)",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 2,
/* TV, Comp1, Composite over SVID con, SVID */
.muxsel = { 2, 3, 1, 1},
.audiomux = { 2, 2, 0, 0, 0 },
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/* sound routing:
GPIO=0x00,0x01,0x03: mute (?)
0x02: both TV and radio (tuner: FM1216/I)
The card has onboard audio connectors labeled "cdrom" and "board",
not soldered here, though unknown wiring.
Card lacks: external audio in, pci subsystem id.
*/
},
/* ---- card 0x60 ---------------------------------- */
[BTTV_BOARD_MACHTV] = {
.name = "MachTV",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 7,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 1, 2, 3, 4},
.needs_tvaudio = 1,
.tuner_type = 5,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_EURESYS_PICOLO] = {
.name = "Euresys Picolo",
.video_inputs = 3,
.audio_inputs = 0,
.tuner = -1,
.svhs = 2,
.gpiomask = 0,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.muxsel = { 2, 0, 1},
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_PV150] = {
/* Luc Van Hoeylandt <luc@e-magic.be> */
.name = "ProVideo PV150", /* 0x4f */
.video_inputs = 2,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0,
.muxsel = { 2, 3 },
.audiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_AD_TVK503] = {
/* Hiroshi Takekawa <sian@big.or.jp> */
/* This card lacks subsystem ID */
.name = "AD-TVK503", /* 0x63 */
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x001e8007,
.muxsel = { 2, 3, 1, 0 },
/* Tuner, Radio, external, internal, off, on */
.audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 2,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = adtvk503_audio,
},
/* ---- card 0x64 ---------------------------------- */
[BTTV_BOARD_HERCULES_SM_TV] = {
.name = "Hercules Smart TV Stereo",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x00,
.muxsel = { 2, 3, 1, 1 },
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 5,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/* Notes:
- card lacks subsystem ID
- stereo variant w/ daughter board with tda9874a @0xb0
- Audio Routing:
always from tda9874 independent of GPIO (?)
external line in: unknown
- Other chips: em78p156elp @ 0x96 (probably IR remote control)
hef4053 (instead 4052) for unknown function
*/
},
[BTTV_BOARD_PACETV] = {
.name = "Pace TV & Radio Card",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
.gpiomask = 0,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = 1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
.pll = PLL_28,
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
only internal line out: (4pin header) RGGL
Radio must be decoded by msp3410d (not routed through)*/
/*
.digital_mode = DIGITAL_MODE_CAMERA, todo!
*/
},
[BTTV_BOARD_IVC200] = {
/* Chris Willing <chris@vislab.usyd.edu.au> */
.name = "IVC-200",
.video_inputs = 1,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = -1,
.gpiomask = 0xdf,
.muxsel = { 2 },
.pll = PLL_28,
},
[BTTV_BOARD_XGUARD] = {
.name = "Grand X-Guard / Trust 814PCI",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.tuner_type = 4,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask2 = 0xff,
.muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
.muxsel_hook = xguard_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
},
/* ---- card 0x68 ---------------------------------- */
[BTTV_BOARD_NEBULA_DIGITV] = {
.name = "Nebula Electronics DigiTV",
.video_inputs = 1,
.tuner = -1,
.svhs = -1,
.muxsel = { 2, 3, 1, 0},
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
},
[BTTV_BOARD_PV143] = {
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
.name = "ProVideo PV143",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0,
.muxsel = { 2, 3, 1, 0 },
.audiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009X1_MINIDIN] = {
/* M.Klahr@phytec.de */
.name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1, /* card has no tuner */
.svhs = 3,
.gpiomask = 0x00,
.muxsel = { 2, 3, 1, 0},
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009X1_COMBI] = {
.name = "PHYTEC VD-009-X1 Combi (bt878)",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1, /* card has no tuner */
.svhs = 3,
.gpiomask = 0x00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* ---- card 0x6c ---------------------------------- */
[BTTV_BOARD_VD009_MINIDIN] = {
.name = "PHYTEC VD-009 MiniDIN (bt878)",
.video_inputs = 10,
.audio_inputs = 0,
.tuner = -1, /* card has no tuner */
.svhs = 9,
.gpiomask = 0x00,
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
via the upper nibble of muxsel. here: used for
xternal video-mux */
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009_COMBI] = {
.name = "PHYTEC VD-009 Combi (bt878)",
.video_inputs = 10,
.audio_inputs = 0,
.tuner = -1, /* card has no tuner */
.svhs = 9,
.gpiomask = 0x00,
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
via the upper nibble of muxsel. here: used for
xternal video-mux */
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_IVC100] = {
.name = "IVC-100",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = -1,
.gpiomask = 0xdf,
.muxsel = { 2, 3, 1, 0 },
.pll = PLL_28,
},
[BTTV_BOARD_IVC120] = {
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
.name = "IVC-120G",
.video_inputs = 16,
.audio_inputs = 0, /* card has no audio */
.tuner = -1, /* card has no tuner */
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = -1, /* card has no svhs */
.needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
.muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
.muxsel_hook = ivc120_muxsel,
.pll = PLL_28,
},
/* ---- card 0x70 ---------------------------------- */
[BTTV_BOARD_PC_HDTV] = {
.name = "pcHDTV HD-2000 TV",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = TUNER_PHILIPS_ATSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_dvb = 1,
},
[BTTV_BOARD_TWINHAN_DST] = {
.name = "Twinhan DST + clones",
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_video = 1,
.has_dvb = 1,
},
[BTTV_BOARD_WINFASTVC100] = {
.name = "Winfast VC100",
.video_inputs = 3,
.audio_inputs = 0,
.svhs = 1,
.tuner = -1,
.muxsel = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_TEV560] = {
.name = "Teppro TEV-560/InterVision IV-560",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 3,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 1, 1, 1, 1, 0},
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_35,
},
/* ---- card 0x74 ---------------------------------- */
[BTTV_BOARD_SIMUS_GVC1100] = {
.name = "SIMUS GVC1100",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
.muxsel = { 2, 2, 2, 2},
.gpiomask = 0x3F,
.muxsel_hook = gvc1100_muxsel,
},
[BTTV_BOARD_NGSTV_PLUS] = {
/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
.name = "NGS NGSTV+",
.video_inputs = 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x008007,
.muxsel = {2, 3, 0, 0},
.audiomux = {0, 0, 0, 0, 0x000003, 0},
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_LMLBT4] = {
/* http://linuxmedialabs.com */
.name = "LMLBT4",
.video_inputs = 4, /* IN1,IN2,IN3,IN4 */
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.muxsel = { 2, 3, 1, 0 },
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.needs_tvaudio = 0,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TEKRAM_M205] = {
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
.name = "Tekram M205 PRO",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = 2,
.needs_tvaudio = 0,
.gpiomask = 0x68,
.muxsel = { 2, 3, 1},
.audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 },
.pll = PLL_28,
},
/* ---- card 0x78 ---------------------------------- */
[BTTV_BOARD_CONTVFMI] = {
/* Javier Cendan Ares <jcendan@lycos.es> */
/* bt878 TV + FM without subsystem ID */
.name = "Conceptronic CONTVFMi",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x008007,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0, 1, 2, 2, 3 },
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
/*Eric DEBIEF <debief@telemsa.com>*/
/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
/*0x79 in bttv.h*/
.name = "Euresys Picolo Tetra",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0,
.gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_SPIRIT_TV] = {
/* Spirit TV Tuner from http://spiritmodems.com.au */
/* Stafford Goodsell <surge@goliath.homeunix.org> */
.name = "Spirit TV Tuner",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x0000000f,
.muxsel = { 2, 1, 1 },
.audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
},
[BTTV_BOARD_AVDVBT_771] = {
/* Wolfram Joost <wojo@frokaschwei.de> */
.name = "AVerMedia AVerTV DVB-T 771",
.video_inputs = 2,
.svhs = 1,
.tuner = -1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.muxsel = { 3 , 3 },
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
/* ---- card 0x7c ---------------------------------- */
[BTTV_BOARD_AVDVBT_761] = {
/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
.name = "AverMedia AverTV DVB-T 761",
.video_inputs = 2,
.tuner = -1,
.svhs = 1,
.muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
[BTTV_BOARD_MATRIX_VISIONSQ] = {
/* andre.schwarz@matrix-vision.de */
.name = "MATRIX Vision Sigma-SQ",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0x0,
.muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
3, 3, 3, 3, 3, 3, 3, 3 },
.muxsel_hook = sigmaSQ_muxsel,
.audiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MATRIX_VISIONSLC] = {
/* andre.schwarz@matrix-vision.de */
.name = "MATRIX Vision Sigma-SLC",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.gpiomask = 0x0,
.muxsel = { 2, 2, 2, 2 },
.muxsel_hook = sigmaSLC_muxsel,
.audiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
/* BTTV_BOARD_APAC_VIEWCOMP */
[BTTV_BOARD_APAC_VIEWCOMP] = {
/* Attila Kondoros <attila.kondoros@chello.hu> */
/* bt878 TV + FM 0x00000000 subsystem ID */
.name = "APAC Viewcomp 878(AMAX)",
.video_inputs = 2,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 0xFF,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 2, 0, 0, 0, 10},
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
.has_radio = 1, /* not every card has radio */
},
/* ---- card 0x80 ---------------------------------- */
[BTTV_BOARD_DVICO_DVBT_LITE] = {
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
.name = "DViCO FusionHDTV DVB-T Lite",
.tuner = -1,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.no_video = 1,
.has_dvb = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VGEAR_MYVCD] = {
/* Steven <photon38@pchome.com.tw> */
.name = "V-Gear MyVCD",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x3f,
.muxsel = {2, 3, 1, 0},
.audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 0,
#if 0
.has_remote = 1,
#endif
},
[BTTV_BOARD_SUPER_TV] = {
/* Rick C <cryptdragoon@gmail.com> */
.name = "Super TV Tuner",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.audiomux = { 0, 0x000001,0,0, 0},
.needs_tvaudio = 1,
.has_radio = 1,
},
[BTTV_BOARD_TIBET_CS16] = {
/* Chris Fanning <video4linux@haydon.net> */
.name = "Tibet Systems 'Progress DVR' CS16",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.svhs = -1,
.muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.muxsel_hook = tibetCS16_muxsel,
},
[BTTV_BOARD_KODICOM_4400R] = {
/* Bill Brack <wbrack@mmm.com.hk> */
/*
* Note that, because of the card's wiring, the "master"
* BT878A chip (i.e. the one which controls the analog switch
* and must use this card type) is the 2nd one detected. The
* other 3 chips should use card type 0x85, whose description
* follows this one. There is a EEPROM on the card (which is
* connected to the I2C of one of those other chips), but is
* not currently handled. There is also a facility for a
* "monitor", which is also not currently implemented.
*/
.name = "Kodicom 4400R (master)",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = -1,
/* GPIO bits 0-9 used for analog switch:
* 00 - 03: camera selector
* 04 - 06: channel (controller) selector
* 07: data (1->on, 0->off)
* 08: strobe
* 09: reset
* bit 16 is input from sync separator for the channel
*/
.gpiomask = 0x0003ff,
.no_gpioirq = 1,
.muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.no_tda9875 = 1,
.muxsel_hook = kodicom4400r_muxsel,
},
[BTTV_BOARD_KODICOM_4400R_SL] = {
/* Bill Brack <wbrack@mmm.com.hk> */
/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
* one which controls the analog switch, and must use the card type)
* is the 2nd one detected. The other 3 chips should use this card
* type
*/
.name = "Kodicom 4400R (slave)",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.svhs = -1,
.gpiomask = 0x010000,
.no_gpioirq = 1,
.muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.no_tda9875 = 1,
.muxsel_hook = kodicom4400r_muxsel,
},
/* ---- card 0x86---------------------------------- */
[BTTV_BOARD_ADLINK_RTV24] = {
/* Michael Henson <mhenson@clarityvi.com> */
/* Adlink RTV24 with special unlock codes */
.name = "Adlink RTV24",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = -1,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.pll = PLL_28,
},
/* ---- card 0x87---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
/* Michael Krufky <mkrufky@m1k.net> */
.name = "DViCO FusionHDTV 5 Lite",
.tuner = 0,
.tuner_type = TUNER_LG_TDVS_H062F,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.video_inputs = 3,
.audio_inputs = 1,
.svhs = 2,
.muxsel = { 2, 3, 1 },
.gpiomask = 0x00e00007,
.audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.has_dvb = 1,
},
/* ---- card 0x88---------------------------------- */
[BTTV_BOARD_ACORP_Y878F] = {
/* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
.name = "Acorp Y878F",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x01fe00,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
.radio_addr = 0xc1 >>1,
.has_radio = 1,
},
/* ---- card 0x89 ---------------------------------- */
[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
.name = "Conceptronic CTVFMi v2",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x001c0007,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0, 1, 2, 2, 3 },
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
/* ---- card 0x8a ---------------------------------- */
[BTTV_BOARD_PV_BT878P_2E] = {
.name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
.video_inputs = 5,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 0x01fe00,
.muxsel = { 2,3,1,1,-1 },
.digital_mode = DIGITAL_MODE_CAMERA,
.audiomux = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_FM,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_remote = 1,
},
/* ---- card 0x8b ---------------------------------- */
[BTTV_BOARD_PV_M4900] = {
/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
.name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x3f,
.muxsel = { 2, 3, 1, 1 },
.audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.has_radio = 1,
.has_remote = 1,
},
/* ---- card 0x8c ---------------------------------- */
[BTTV_BOARD_OSPREY440] = {
.name = "Osprey 440",
.video_inputs = 1,
.audio_inputs = 1,
.tuner = -1,
.svhs = 1,
.muxsel = { 2 },
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
/* ---- card 0x8d ---------------------------------- */
[BTTV_BOARD_ASOUND_SKYEYE] = {
.name = "Asound Skyeye PCTV",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 15,
.muxsel = { 2, 3, 1, 1},
.audiomux = {2,0,0,0,1},
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = 2,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
},
};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
/* ----------------------------------------------------------------------- */
static unsigned char eeprom_data[256];
/*
* identify card
*/
void __devinit bttv_idcard(struct bttv *btv)
{
unsigned int gpiobits;
int i,type;
unsigned short tmp;
/* read PCI subsystem ID */
pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
btv->cardid = tmp << 16;
pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
btv->cardid |= tmp;
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
/* look for the card */
for (type = -1, i = 0; cards[i].id != 0; i++)
if (cards[i].id == btv->cardid)
type = i;
if (type != -1) {
/* found it */
printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
"PCI subsystem ID is %04x:%04x\n",
btv->c.nr,cards[type].name,cards[type].cardnr,
btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
btv->c.type = cards[type].cardnr;
} else {
/* 404 */
printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
btv->c.nr, btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
printk(KERN_DEBUG "please mail id, board name and "
"the correct card= insmod option to video4linux-list@redhat.com\n");
}
}
/* let the user override the autodetected type */
if (card[btv->c.nr] < bttv_num_tvcards)
btv->c.type=card[btv->c.nr];
/* print which card config we are using */
printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
bttv_tvcards[btv->c.type].name, btv->c.type,
card[btv->c.nr] < bttv_num_tvcards
? "insmod option" : "autodetected");
/* overwrite gpio stuff ?? */
if (UNSET == audioall && UNSET == audiomux[0])
return;
if (UNSET != audiomux[0]) {
gpiobits = 0;
for (i = 0; i < 5; i++) {
bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
gpiobits |= audiomux[i];
}
} else {
gpiobits = audioall;
for (i = 0; i < 5; i++) {
bttv_tvcards[btv->c.type].audiomux[i] = audioall;
}
}
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
for (i = 0; i < 5; i++) {
printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
}
printk("\n");
}
/*
* (most) board specific initialisations goes here
*/
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
{
int type = -1;
if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
type = BTTV_BOARD_MODTEC_205;
else if (0 == strncmp(eeprom_data+20,"Picolo",7))
type = BTTV_BOARD_EURESYS_PICOLO;
else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
if (-1 != type) {
btv->c.type = type;
printk("bttv%d: detected by eeprom: %s [card=%d]\n",
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
}
}
static void flyvideo_gpio(struct bttv *btv)
{
int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
int tuner=-1,ttype;
gpio_inout(0xffffff, 0);
udelay(8); /* without this we would see the 0x1800 mask */
gpio = gpio_read();
/* FIXME: must restore OUR_EN ??? */
/* all cards provide GPIO info, some have an additional eeprom
* LR50: GPIO coding can be found lower right CP1 .. CP9
* CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
* GPIO14-12: n.c.
* LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
* lowest 3 bytes are remote control codes (no handshake needed)
* xxxFFF: No remote control chip soldered
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
ttype=(gpio&0x0f0000)>>16;
switch(ttype) {
case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
break;
case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
break;
case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
break;
case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
}
has_remote = gpio & 0x800000;
has_radio = gpio & 0x400000;
/* unknown 0x200000;
* unknown2 0x100000; */
is_capture_only = !(gpio & 0x008000); /* GPIO15 */
has_tda9820_tda9821 = !(gpio & 0x004000);
is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
/*
* gpio & 0x001000 output bit for audio routing */
if(is_capture_only)
tuner=4; /* No tuner present */
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
is_capture_only?"yes":"no ");
if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
btv->tuner_type = tuner;
btv->has_radio = has_radio;
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
/* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
}
static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
static void miro_pinnacle_gpio(struct bttv *btv)
{
int id,msp,gpio;
char *info;
gpio_inout(0xffffff, 0);
gpio = gpio_read();
id = ((gpio>>10) & 63) -1;
msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
if (id < 32) {
btv->tuner_type = miro_tunermap[id];
if (0 == (gpio & 0x20)) {
btv->has_radio = 1;
if (!miro_fmtuner[id]) {
btv->has_matchbox = 1;
btv->mbox_we = (1<<6);
btv->mbox_most = (1<<7);
btv->mbox_clk = (1<<8);
btv->mbox_data = (1<<9);
btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
}
} else {
btv->has_radio = 0;
}
if (-1 != msp) {
if (btv->c.type == BTTV_BOARD_MIRO)
btv->c.type = BTTV_BOARD_MIROPRO;
if (btv->c.type == BTTV_BOARD_PINNACLE)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
}
printk(KERN_INFO
"bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
btv->c.nr, id+1, btv->tuner_type,
!btv->has_radio ? "no" :
(btv->has_matchbox ? "matchbox" : "fmtuner"),
(-1 == msp) ? "no" : "yes");
} else {
/* new cards with microtune tuner */
id = 63 - id;
btv->has_radio = 0;
switch (id) {
case 1:
info = "PAL / mono";
break;
case 2:
info = "PAL+SECAM / stereo";
btv->has_radio = 1;
break;
case 3:
info = "NTSC / stereo";
btv->has_radio = 1;
break;
case 4:
info = "PAL+SECAM / mono";
break;
case 5:
info = "NTSC / mono";
break;
case 6:
info = "NTSC / stereo";
break;
case 7:
info = "PAL / stereo";
break;
default:
info = "oops: unknown card";
break;
}
if (-1 != msp)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
printk(KERN_INFO
"bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
btv->tuner_type = 33;
btv->pinnacle_id = id;
}
}
/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
#define LM1882_SYNC_DRIVE 0x200000L
static void init_ids_eagle(struct bttv *btv)
{
gpio_inout(0xffffff,0xFFFF37);
gpio_write(0x200020);
/* flash strobe inverter ?! */
gpio_write(0x200024);
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
/* set BT848 muxel to 2 */
btaor((2)<<5, ~(2<<5), BT848_IFORM);
}
/* Muxsel helper for the IDS Eagle.
* the eagles does not use the standard muxsel-bits but
* has its own multiplexer */
static void eagle_muxsel(struct bttv *btv, unsigned int input)
{
btaor((2)<<5, ~(3<<5), BT848_IFORM);
gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
/* composite */
/* set chroma ADC to sleep */
btor(BT848_ADC_C_SLEEP, BT848_ADC);
/* set to composite video */
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
}
static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
{
static const int masks[] = {0x30, 0x01, 0x12, 0x23};
gpio_write(masks[input%4]);
}
/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
alarms output
GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
IN - sensor inputs, INx - sensor inputs and TI XORed together
O1,O2,O3 - alarm outputs (relays)
OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
*/
static void init_lmlbt4x(struct bttv *btv)
{
printk(KERN_DEBUG "LMLBT4x init\n");
btwrite(0x000000, BT848_GPIO_REG_INP);
gpio_inout(0xffffff, 0x0006C0);
gpio_write(0x000000);
}
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 8;
gpio_inout( 0xf, 0xf );
gpio_bits( 0xf, inmux );
}
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 4;
gpio_inout( 3<<9, 3<<9 );
gpio_bits( 3<<9, inmux<<9 );
}
/* ----------------------------------------------------------------------- */
static void bttv_reset_audio(struct bttv *btv)
{
/*
* BT878A has a audio-reset register.
* 1. This register is an audio reset function but it is in
* function-0 (video capture) address space.
* 2. It is enough to do this once per power-up of the card.
* 3. There is a typo in the Conexant doc -- it is not at
* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
* --//Shrikumar 030609
*/
if (btv->id != 878)
return;
if (bttv_debug)
printk("bttv%d: BT878A ARESET\n",btv->c.nr);
btwrite((1<<7), 0x058);
udelay(10);
btwrite( 0, 0x058);
}
/* initialization part one -- before registering i2c bus */
void __devinit bttv_init_card1(struct bttv *btv)
{
switch (btv->c.type) {
case BTTV_BOARD_HAUPPAUGE:
case BTTV_BOARD_HAUPPAUGE878:
boot_msp34xx(btv,5);
break;
case BTTV_BOARD_VOODOOTV_FM:
boot_msp34xx(btv,20);
break;
case BTTV_BOARD_AVERMEDIA98:
boot_msp34xx(btv,11);
break;
case BTTV_BOARD_HAUPPAUGEPVR:
pvr_boot(btv);
break;
case BTTV_BOARD_TWINHAN_DST:
case BTTV_BOARD_AVDVBT_771:
case BTTV_BOARD_PINNACLESAT:
btv->use_i2c_hw = 1;
break;
case BTTV_BOARD_ADLINK_RTV24:
init_RTV24( btv );
break;
}
if (!bttv_tvcards[btv->c.type].has_dvb)
bttv_reset_audio(btv);
}
/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
int tda9887;
int addr=ADDR_UNSET;
btv->tuner_type = -1;
if (BTTV_BOARD_UNKNOWN == btv->c.type) {
bttv_readee(btv,eeprom_data,0xa0);
identify_by_eeprom(btv,eeprom_data);
}
switch (btv->c.type) {
case BTTV_BOARD_MIRO:
case BTTV_BOARD_MIROPRO:
case BTTV_BOARD_PINNACLE:
case BTTV_BOARD_PINNACLEPRO:
/* miro/pinnacle */
miro_pinnacle_gpio(btv);
break;
case BTTV_BOARD_FLYVIDEO_98:
case BTTV_BOARD_MAXI:
case BTTV_BOARD_LIFE_FLYKIT:
case BTTV_BOARD_FLYVIDEO:
case BTTV_BOARD_TYPHOON_TVIEW:
case BTTV_BOARD_CHRONOS_VS2:
case BTTV_BOARD_FLYVIDEO_98FM:
case BTTV_BOARD_FLYVIDEO2000:
case BTTV_BOARD_FLYVIDEO98EZ:
case BTTV_BOARD_CONFERENCETV:
case BTTV_BOARD_LIFETEC_9415:
flyvideo_gpio(btv);
break;
case BTTV_BOARD_HAUPPAUGE:
case BTTV_BOARD_HAUPPAUGE878:
case BTTV_BOARD_HAUPPAUGEPVR:
/* pick up some config infos from the eeprom */
bttv_readee(btv,eeprom_data,0xa0);
hauppauge_eeprom(btv);
break;
case BTTV_BOARD_AVERMEDIA98:
case BTTV_BOARD_AVPHONE98:
bttv_readee(btv,eeprom_data,0xa0);
avermedia_eeprom(btv);
break;
case BTTV_BOARD_PXC200:
init_PXC200(btv);
break;
case BTTV_BOARD_PICOLO_TETRA_CHIP:
picolo_tetra_init(btv);
break;
case BTTV_BOARD_VHX:
btv->has_radio = 1;
btv->has_matchbox = 1;
btv->mbox_we = 0x20;
btv->mbox_most = 0;
btv->mbox_clk = 0x08;
btv->mbox_data = 0x10;
btv->mbox_mask = 0x38;
break;
case BTTV_BOARD_VOBIS_BOOSTAR:
case BTTV_BOARD_TERRATV:
terratec_active_radio_upgrade(btv);
break;
case BTTV_BOARD_MAGICTVIEW061:
if (btv->cardid == 0x3002144f) {
btv->has_radio=1;
printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
}
break;
case BTTV_BOARD_STB2:
if (btv->cardid == 0x3060121a) {
/* Fix up entry for 3DFX VoodooTV 100,
which is an OEM STB card variant. */
btv->has_radio=0;
btv->tuner_type=TUNER_TEMIC_NTSC;
}
break;
case BTTV_BOARD_OSPREY1x0:
case BTTV_BOARD_OSPREY1x0_848:
case BTTV_BOARD_OSPREY101_848:
case BTTV_BOARD_OSPREY1x1:
case BTTV_BOARD_OSPREY1x1_SVID:
case BTTV_BOARD_OSPREY2xx:
case BTTV_BOARD_OSPREY2x0_SVID:
case BTTV_BOARD_OSPREY2x0:
case BTTV_BOARD_OSPREY500:
case BTTV_BOARD_OSPREY540:
case BTTV_BOARD_OSPREY2000:
bttv_readee(btv,eeprom_data,0xa0);
osprey_eeprom(btv);
break;
case BTTV_BOARD_IDS_EAGLE:
init_ids_eagle(btv);
break;
case BTTV_BOARD_MODTEC_205:
bttv_readee(btv,eeprom_data,0xa0);
modtec_eeprom(btv);
break;
case BTTV_BOARD_LMLBT4:
init_lmlbt4x(btv);
break;
case BTTV_BOARD_TIBET_CS16:
tibetCS16_init(btv);
break;
case BTTV_BOARD_KODICOM_4400R:
kodicom4400r_init(btv);
break;
}
/* pll configuration */
if (!(btv->id==848 && btv->revision==0x11)) {
/* defaults from card list */
if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq=28636363;
btv->pll.pll_crystal=BT848_IFORM_XT0;
}
if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq=35468950;
btv->pll.pll_crystal=BT848_IFORM_XT1;
}
/* insmod options can override */
switch (pll[btv->c.nr]) {
case 0: /* none */
btv->pll.pll_crystal = 0;
btv->pll.pll_ifreq = 0;
btv->pll.pll_ofreq = 0;
break;
case 1: /* 28 MHz */
case 28:
btv->pll.pll_ifreq = 28636363;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT0;
break;
case 2: /* 35 MHz */
case 35:
btv->pll.pll_ifreq = 35468950;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT1;
break;
}
}
btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
addr = bttv_tvcards[btv->c.type].tuner_addr;
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
if(UNSET == btv->tuner_type)
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
if (UNSET != tuner[btv->c.nr])
btv->tuner_type = tuner[btv->c.nr];
printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
if (btv->tuner_type != UNSET) {
struct tuner_setup tun_setup;
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
}
if (btv->pinnacle_id != UNSET) {
bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE,
&btv->pinnacle_id);
}
btv->svhs = bttv_tvcards[btv->c.type].svhs;
if (svhs[btv->c.nr] != UNSET)
btv->svhs = svhs[btv->c.nr];
if (remote[btv->c.nr] != UNSET)
btv->has_remote = remote[btv->c.nr];
if (bttv_tvcards[btv->c.type].has_radio)
btv->has_radio=1;
if (bttv_tvcards[btv->c.type].has_remote)
btv->has_remote=1;
if (!bttv_tvcards[btv->c.type].no_gpioirq)
btv->gpioirq=1;
if (bttv_tvcards[btv->c.type].audio_hook)
btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
/* detect Bt832 chip for quartzsight digital camera */
if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
(bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
boot_bt832(btv);
}
if (!autoload)
return;
/* try to detect audio/fader chips */
if (!bttv_tvcards[btv->c.type].no_msp34xx &&
bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
request_module("msp3400");
if (bttv_tvcards[btv->c.type].msp34xx_alt &&
bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
request_module("msp3400");
if (!bttv_tvcards[btv->c.type].no_tda9875 &&
bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
request_module("tda9875");
if (!bttv_tvcards[btv->c.type].no_tda7432 &&
bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
request_module("tda7432");
if (bttv_tvcards[btv->c.type].needs_tvaudio)
request_module("tvaudio");
/* tuner modules */
tda9887 = 0;
if (btv->pinnacle_id != UNSET)
tda9887 = 1;
if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
tda9887 = 1;
/* Hybrid DVB card, DOES have a tda9887 */
if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
tda9887 = 1;
if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
(btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
(btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
tda9887)
request_module("tda9887");
if (btv->tuner_type != UNSET)
request_module("tuner");
}
/* ----------------------------------------------------------------------- */
static void modtec_eeprom(struct bttv *btv)
{
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
btv->tuner_type=TUNER_PHILIPS_NTSC;
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
} else {
printk("bttv%d: Modtec: Unknown TunerString: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
}
}
static void __devinit hauppauge_eeprom(struct bttv *btv)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
btv->tuner_type = tv.tuner_type;
btv->has_radio = tv.has_radio;
}
static int terratec_active_radio_upgrade(struct bttv *btv)
{
int freq;
btv->has_radio = 1;
btv->has_matchbox = 1;
btv->mbox_we = 0x10;
btv->mbox_most = 0x20;
btv->mbox_clk = 0x08;
btv->mbox_data = 0x04;
btv->mbox_mask = 0x3c;
btv->mbox_iow = 1 << 8;
btv->mbox_ior = 1 << 9;
btv->mbox_csel = 1 << 10;
freq=88000/62.5;
tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
if (0x1ed8 == tea5757_read(btv)) {
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
btv->c.nr);
btv->has_radio = 1;
btv->has_matchbox = 1;
} else {
btv->has_radio = 0;
btv->has_matchbox = 0;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/*
* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
*
* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
* unpacked with unzip).
*/
#define PVR_GPIO_DELAY 10
#define BTTV_ALT_DATA 0x000001
#define BTTV_ALT_DCLK 0x100000
#define BTTV_ALT_NCONFIG 0x800000
static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
{
u32 n;
u8 bits;
int i;
gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
gpio_write(0);
udelay(PVR_GPIO_DELAY);
gpio_write(BTTV_ALT_NCONFIG);
udelay(PVR_GPIO_DELAY);
for (n = 0; n < microlen; n++) {
bits = micro[n];
for ( i = 0 ; i < 8 ; i++ ) {
gpio_bits(BTTV_ALT_DCLK,0);
if (bits & 0x01)
gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
else
gpio_bits(BTTV_ALT_DATA,0);
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
bits >>= 1;
}
}
gpio_bits(BTTV_ALT_DCLK,0);
udelay(PVR_GPIO_DELAY);
/* begin Altera init loop (Not necessary,but doesn't hurt) */
for (i = 0 ; i < 30 ; i++) {
gpio_bits(BTTV_ALT_DCLK,0);
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
}
gpio_bits(BTTV_ALT_DCLK,0);
return 0;
}
static int __devinit pvr_boot(struct bttv *btv)
{
const struct firmware *fw_entry;
int rc;
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
if (rc != 0) {
printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
btv->c.nr);
return rc;
}
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
btv->c.nr, (rc < 0) ? "failed" : "ok");
release_firmware(fw_entry);
return rc;
}
/* ----------------------------------------------------------------------- */
/* some osprey specific stuff */
static void __devinit osprey_eeprom(struct bttv *btv)
{
int i = 0;
unsigned char *ee = eeprom_data;
unsigned long serial = 0;
if (btv->c.type == 0) {
/* this might be an antique... check for MMAC label in eeprom */
if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
unsigned char checksum = 0;
for (i =0; i<21; i++)
checksum += ee[i];
if (checksum != ee[21])
return;
btv->c.type = BTTV_BOARD_OSPREY1x0_848;
for (i = 12; i < 21; i++)
serial *= 10, serial += ee[i] - '0';
}
} else {
unsigned short type;
int offset = 4*16;
for(; offset < 8*16; offset += 16) {
unsigned short checksum = 0;
/* verify the checksum */
for(i = 0; i<14; i++) checksum += ee[i+offset];
checksum = ~checksum; /* no idea why */
if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
((checksum & 0x0FF) == ee[offset+15])) {
break;
}
}
if (offset >= 8*16)
return;
/* found a valid descriptor */
type = (ee[offset+4]<<8) | (ee[offset+5]);
switch(type) {
/* 848 based */
case 0x0004:
btv->c.type = BTTV_BOARD_OSPREY1x0_848;
break;
case 0x0005:
btv->c.type = BTTV_BOARD_OSPREY101_848;
break;
/* 878 based */
case 0x0012:
case 0x0013:
btv->c.type = BTTV_BOARD_OSPREY1x0;
break;
case 0x0014:
case 0x0015:
btv->c.type = BTTV_BOARD_OSPREY1x1;
break;
case 0x0016:
case 0x0017:
case 0x0020:
btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
break;
case 0x0018:
case 0x0019:
case 0x001E:
case 0x001F:
btv->c.type = BTTV_BOARD_OSPREY2xx;
break;
case 0x001A:
case 0x001B:
btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
break;
case 0x0040:
btv->c.type = BTTV_BOARD_OSPREY500;
break;
case 0x0050:
case 0x0056:
btv->c.type = BTTV_BOARD_OSPREY540;
/* bttv_osprey_540_init(btv); */
break;
case 0x0060:
case 0x0070:
btv->c.type = BTTV_BOARD_OSPREY2x0;
/* enable output on select control lines */
gpio_inout(0xffffff,0x000303);
break;
default:
/* unknown...leave generic, but get serial # */
break;
}
serial = (ee[offset+6] << 24)
| (ee[offset+7] << 16)
| (ee[offset+8] << 8)
| (ee[offset+9]);
}
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
}
/* ----------------------------------------------------------------------- */
/* AVermedia specific stuff, from bktr_card.c */
static int tuner_0_table[] = {
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_FM1216ME_MK3 };
static int tuner_1_table[] = {
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
static void __devinit avermedia_eeprom(struct bttv *btv)
{
int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
if(tuner_format <=0x0a)
tuner = tuner_0_table[tuner_format];
if (tuner_make == 1)
if(tuner_format <=9)
tuner = tuner_1_table[tuner_format];
if (tuner_make == 4)
if(tuner_format == 0x09)
tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
if(tuner) {
btv->tuner_type=tuner;
printk("%d",tuner);
} else
printk("Unknown type");
printk(" radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
void bttv_tda9880_setnorm(struct bttv *btv, int norm)
{
/* fix up our card entry */
if(norm==VIDEO_MODE_NTSC) {
bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff;
bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff;
dprintk("bttv_tda9880_setnorm to NTSC\n");
}
else {
bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff;
bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff;
dprintk("bttv_tda9880_setnorm to PAL\n");
}
/* set GPIO according */
gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
bttv_tvcards[btv->c.type].audiomux[btv->audio]);
}
/*
* reset/enable the MSP on some Hauppauge cards
* Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
*
* Hauppauge: pin 5
* Voodoo: pin 20
*/
static void __devinit boot_msp34xx(struct bttv *btv, int pin)
{
int mask = (1 << pin);
gpio_inout(mask,mask);
gpio_bits(mask,0);
udelay(2500);
gpio_bits(mask,mask);
if (bttv_gpio)
bttv_gpio_tracking(btv,"msp34xx");
if (bttv_verbose)
printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
"init [%d]\n", btv->c.nr, pin);
}
static void __devinit boot_bt832(struct bttv *btv)
{
}
/* ----------------------------------------------------------------------- */
/* Imagenation L-Model PXC200 Framegrabber */
/* This is basically the same procedure as
* used by Alessandro Rubini in his pxc200
* driver, but using BTTV functions */
static void __devinit init_PXC200(struct bttv *btv)
{
static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
0x00 };
unsigned int i;
int tmp;
u32 val;
/* Initialise GPIO-connevted stuff */
gpio_inout(0xffffff, (1<<13));
gpio_write(0);
udelay(3);
gpio_write(1<<13);
/* GPIO inputs are pulled up, so no need to drive
* reset pin any longer */
gpio_bits(0xffffff, 0);
if (bttv_gpio)
bttv_gpio_tracking(btv,"pxc200");
/* we could/should try and reset/control the AD pots? but
right now we simply turned off the crushing. Without
this the AGC drifts drifts
remember the EN is reverse logic -->
setting BT848_ADC_AGC_EN disable the AGC
tboult@eecs.lehigh.edu
*/
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
/* Initialise MAX517 DAC */
printk(KERN_INFO "Setting DAC reference voltage level ...\n");
bttv_I2CWrite(btv,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
/* The I2CWrite and I2CRead commmands are actually to the
* same chips - but the R/W bit is included in the address
* argument so the numbers are different */
printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
/* First of all, enable the clock line. This is used in the PXC200-F */
val = btread(BT848_GPIO_DMA_CTL);
val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
btwrite(val, BT848_GPIO_DMA_CTL);
/* Then, push to 0 the reset pin long enough to reset the *
* device same as above for the reset line, but not the same
* value sent to the GPIO-connected stuff
* which one is the good one? */
gpio_inout(0xffffff,(1<<2));
gpio_write(0);
udelay(10);
gpio_write(1<<2);
for (i = 0; i < ARRAY_SIZE(vals); i++) {
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
if (tmp != -1) {
printk(KERN_INFO
"I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
}
}
printk(KERN_INFO "PXC200 Initialised.\n");
}
/* ----------------------------------------------------------------------- */
/*
* The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
* it. This apparently involves the following procedure for each 878 chip:
*
* 1) write 0x00C3FEFF to the GPIO_OUT_EN register
*
* 2) write to GPIO_DATA
* - 0x0E
* - sleep 1ms
* - 0x10 + 0x0E
* - sleep 10ms
* - 0x0E
* read from GPIO_DATA into buf (uint_32)
* - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
* error. ERROR_CPLD_Check_Failed stop.
*
* 3) write to GPIO_DATA
* - write 0x4400 + 0x0E
* - sleep 10ms
* - write 0x4410 + 0x0E
* - sleep 1ms
* - write 0x0E
* read from GPIO_DATA into buf (uint_32)
* - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
void
init_RTV24 (struct bttv *btv)
{
uint32_t dataRead = 0;
long watchdog_value = 0x0E;
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation in progress ...\n",
btv->c.nr);
btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
msleep (1);
btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
msleep (10);
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
}
btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
msleep (10);
btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
msleep (1);
btwrite (watchdog_value, BT848_GPIO_DATA);
msleep (1);
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
return;
}
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
}
/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
/*
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
* This code is placed under the terms of the GNU General Public License
*
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
*/
static void bus_low(struct bttv *btv, int bit)
{
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
gpio_bits(bit,0);
udelay(5);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
}
}
static void bus_high(struct bttv *btv, int bit)
{
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
gpio_bits(bit,bit);
udelay(5);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
}
}
static int bus_in(struct bttv *btv, int bit)
{
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
}
return gpio_read() & (bit);
}
/* TEA5757 register bits */
#define TEA_FREQ 0:14
#define TEA_BUFFER 15:15
#define TEA_SIGNAL_STRENGTH 16:17
#define TEA_PORT1 18:18
#define TEA_PORT0 19:19
#define TEA_BAND 20:21
#define TEA_BAND_FM 0
#define TEA_BAND_MW 1
#define TEA_BAND_LW 2
#define TEA_BAND_SW 3
#define TEA_MONO 22:22
#define TEA_ALLOW_STEREO 0
#define TEA_FORCE_MONO 1
#define TEA_SEARCH_DIRECTION 23:23
#define TEA_SEARCH_DOWN 0
#define TEA_SEARCH_UP 1
#define TEA_STATUS 24:24
#define TEA_STATUS_TUNED 0
#define TEA_STATUS_SEARCHING 1
/* Low-level stuff */
static int tea5757_read(struct bttv *btv)
{
unsigned long timeout;
int value = 0;
int i;
/* better safe than sorry */
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
if (bttv_gpio)
bttv_gpio_tracking(btv,"tea5757 read");
bus_low(btv,btv->mbox_we);
bus_low(btv,btv->mbox_clk);
udelay(10);
timeout= jiffies + HZ;
/* wait for DATA line to go low; error if it doesn't */
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
schedule();
if (bus_in(btv,btv->mbox_data)) {
printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
return -1;
}
dprintk("bttv%d: tea5757:",btv->c.nr);
for(i = 0; i < 24; i++)
{
udelay(5);
bus_high(btv,btv->mbox_clk);
udelay(5);
dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
bus_low(btv,btv->mbox_clk);
value <<= 1;
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
}
dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
return value;
}
static int tea5757_write(struct bttv *btv, int value)
{
int i;
int reg = value;
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
if (bttv_gpio)
bttv_gpio_tracking(btv,"tea5757 write");
dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
bus_low(btv,btv->mbox_clk);
bus_high(btv,btv->mbox_we);
for(i = 0; i < 25; i++)
{
if (reg & 0x1000000)
bus_high(btv,btv->mbox_data);
else
bus_low(btv,btv->mbox_data);
reg <<= 1;
bus_high(btv,btv->mbox_clk);
udelay(10);
bus_low(btv,btv->mbox_clk);
udelay(10);
}
bus_low(btv,btv->mbox_we); /* unmute !!! */
return 0;
}
void tea5757_set_freq(struct bttv *btv, unsigned short freq)
{
dprintk("tea5757_set_freq %d\n",freq);
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
}
/* ----------------------------------------------------------------------- */
/* winview */
void winview_audio(struct bttv *btv, struct video_audio *v, int set)
{
/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
int bits_out, loops, vol, data;
if (!set) {
/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
v->flags |= VIDEO_AUDIO_VOLUME;
return;
}
/* 32 levels logarithmic */
vol = 32 - ((v->volume>>11));
/* units */
bits_out = (PT2254_DBS_IN_2>>(vol%5));
/* tens */
bits_out |= (PT2254_DBS_IN_10>>(vol/5));
bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
data = gpio_read();
data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
WINVIEW_PT2254_STROBE);
for (loops = 17; loops >= 0 ; loops--) {
if (bits_out & (1<<loops))
data |= WINVIEW_PT2254_DATA;
else
data &= ~WINVIEW_PT2254_DATA;
gpio_write(data);
udelay(5);
data |= WINVIEW_PT2254_CLK;
gpio_write(data);
udelay(5);
data &= ~WINVIEW_PT2254_CLK;
gpio_write(data);
}
data |= WINVIEW_PT2254_STROBE;
data &= ~WINVIEW_PT2254_DATA;
gpio_write(data);
udelay(10);
data &= ~WINVIEW_PT2254_STROBE;
gpio_write(data);
}
/* ----------------------------------------------------------------------- */
/* mono/stereo control for various cards (which don't use i2c chips but */
/* connect something to the GPIO pins */
static void
gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int con = 0;
if (set) {
gpio_inout(0x300, 0x300);
if (v->mode & VIDEO_SOUND_LANG1)
con = 0x000;
if (v->mode & VIDEO_SOUND_LANG2)
con = 0x300;
if (v->mode & VIDEO_SOUND_STEREO)
con = 0x200;
/* if (v->mode & VIDEO_SOUND_MONO)
* con = 0x100; */
gpio_bits(0x300, con);
} else {
v->mode = VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
static void
gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int val, con;
if (btv->radio_user)
return;
val = gpio_read();
if (set) {
con = 0x000;
if (v->mode & VIDEO_SOUND_LANG2) {
if (v->mode & VIDEO_SOUND_LANG1) {
/* LANG1 + LANG2 */
con = 0x100;
}
else {
/* LANG2 */
con = 0x300;
}
}
if (con != (val & 0x300)) {
gpio_bits(0x300, con);
if (bttv_gpio)
bttv_gpio_tracking(btv,"gvbctv5pci");
}
} else {
switch (val & 0x70) {
case 0x10:
v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
break;
case 0x30:
v->mode = VIDEO_SOUND_LANG2;
break;
case 0x50:
v->mode = VIDEO_SOUND_LANG1;
break;
case 0x60:
v->mode = VIDEO_SOUND_STEREO;
break;
case 0x70:
v->mode = VIDEO_SOUND_MONO;
break;
default:
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
}
/*
* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
* 0xdde enables mono and 0xccd enables sap
*
* Petr Vandrovec <VANDROVE@vc.cvut.cz>
* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
* input/output sound connection, so both must be set for output mode.
*
* Looks like it's needed only for the "tvphone", the "tvphone 98"
* handles this with a tda9840
*
*/
static void
avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
{
int val = 0;
if (set) {
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
val = 0x02;
if (v->mode & VIDEO_SOUND_STEREO)
val = 0x01;
if (val) {
gpio_bits(0x03,val);
if (bttv_gpio)
bttv_gpio_tracking(btv,"avermedia");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1;
return;
}
}
static void
avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
{
int val = 0;
if (set) {
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
val = 0x01;
if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
val = 0x02;
btaor(val, ~0x03, BT848_GPIO_DATA);
if (bttv_gpio)
bttv_gpio_tracking(btv,"avermedia");
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
return;
}
}
/* Lifetec 9415 handling */
static void
lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
{
int val = 0;
if (gpio_read() & 0x4000) {
v->mode = VIDEO_SOUND_MONO;
return;
}
if (set) {
if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
val = 0x0080;
if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
val = 0x0880;
if ((v->mode & VIDEO_SOUND_LANG1) ||
(v->mode & VIDEO_SOUND_MONO))
val = 0;
gpio_bits(0x0880, val);
if (bttv_gpio)
bttv_gpio_tracking(btv,"lt9415");
} else {
/* autodetect doesn't work with this card :-( */
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
return;
}
}
/* TDA9821 on TerraTV+ Bt848, Bt878 */
static void
terratv_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int con = 0;
if (set) {
gpio_inout(0x180000,0x180000);
if (v->mode & VIDEO_SOUND_LANG2)
con = 0x080000;
if (v->mode & VIDEO_SOUND_STEREO)
con = 0x180000;
gpio_bits(0x180000, con);
if (bttv_gpio)
bttv_gpio_tracking(btv,"terratv");
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
static void
winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned long val = 0;
if (set) {
/*btor (0xc32000, BT848_GPIO_OUT_EN);*/
if (v->mode & VIDEO_SOUND_MONO) /* Mono */
val = 0x420000;
if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
val = 0x420000;
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
val = 0x410000;
if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
val = 0x020000;
if (val) {
gpio_bits(0x430000, val);
if (bttv_gpio)
bttv_gpio_tracking(btv,"winfast2000");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
/*
* Dariusz Kowalewski <darekk@automex.pl>
* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
* revision 9B has on-board TDA9874A sound decoder).
*
* Note: There are card variants without tda9874a. Forcing the "stereo sound route"
* will mute this cards.
*/
static void
pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int val = 0;
if (btv->radio_user)
return;
if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
val = 0x01;
}
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|| (v->mode & VIDEO_SOUND_STEREO)) {
val = 0x02;
}
if (val) {
gpio_bits(0x03,val);
if (bttv_gpio)
bttv_gpio_tracking(btv,"pvbt878p9b");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
/*
* Dariusz Kowalewski <darekk@automex.pl>
* sound control for FlyVideo 2000S (with tda9874 decoder)
* based on pvbt878p9b_audio() - this is not tested, please fix!!!
*/
static void
fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int val = 0xffff;
if (btv->radio_user)
return;
if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
val = 0x0000;
}
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|| (v->mode & VIDEO_SOUND_STEREO)) {
val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
}
if (val != 0xffff) {
gpio_bits(0x1800, val);
if (bttv_gpio)
bttv_gpio_tracking(btv,"fv2000s");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
/*
* sound control for Canopus WinDVR PCI
* Masaki Suzuki <masaki@btree.org>
*/
static void
windvr_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned long val = 0;
if (set) {
if (v->mode & VIDEO_SOUND_MONO)
val = 0x040000;
if (v->mode & VIDEO_SOUND_LANG1)
val = 0;
if (v->mode & VIDEO_SOUND_LANG2)
val = 0x100000;
if (v->mode & VIDEO_SOUND_STEREO)
val = 0;
if (val) {
gpio_bits(0x140000, val);
if (bttv_gpio)
bttv_gpio_tracking(btv,"windvr");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
/*
* sound control for AD-TVK503
* Hiroshi Takekawa <sian@big.or.jp>
*/
static void
adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
{
unsigned int con = 0xffffff;
/* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
if (set) {
/* btor(***, BT848_GPIO_OUT_EN); */
if (v->mode & VIDEO_SOUND_LANG1)
con = 0x00000000;
if (v->mode & VIDEO_SOUND_LANG2)
con = 0x00180000;
if (v->mode & VIDEO_SOUND_STEREO)
con = 0x00000000;
if (v->mode & VIDEO_SOUND_MONO)
con = 0x00060000;
if (con != 0xffffff) {
gpio_bits(0x1e0000,con);
if (bttv_gpio)
bttv_gpio_tracking(btv, "adtvk503");
}
} else {
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
}
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
*
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
* switch instead (CD22M3494E). This IC can have multiple active connections
* between Xn (input) and Yn (output) pins. We need to clear any existing
* connection prior to establish a new one, pulsing the STROBE pin.
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
* GPIO[8] - - P3[5] (microcontroler)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
* GPINTR - - P3[4] (microcontroler)
*
* The microcontroler is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroler
* which is also wired to I2C interface. I have no further info on the
* microcontroler features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
static void rv605_muxsel(struct bttv *btv, unsigned int input)
{
/* reset all conections */
gpio_bits(0x200,0x200);
mdelay(1);
gpio_bits(0x200,0x000);
mdelay(1);
/* create a new conection */
gpio_bits(0x480,0x080);
gpio_bits(0x480,0x480);
mdelay(1);
gpio_bits(0x480,0x080);
mdelay(1);
}
/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
*
* The CS16 (available on eBay cheap) is a PCI board with four Fusion
* 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
* chips, ten eight input analog multiplexors, a not chip and a few
* other components.
*
* 16 inputs on a secondary bracket are provided and can be selected
* from each of the four capture chips. Two of the eight input
* multiplexors are used to select from any of the 16 input signals.
*
* Unsupported hardware capabilities:
* . A video output monitor on the secondary bracket can be selected from
* one of the 878A chips.
* . Another passthrough but I haven't spent any time investigating it.
* . Digital I/O (logic level connected to GPIO) is available from an
* onboard header.
*
* The on chip input mux should always be set to 2.
* GPIO[16:19] - Video input selection
* GPIO[0:3] - Video output monitor select (only available from one 878A)
* GPIO[?:?] - Digital I/O.
*
* There is an ATMEL microcontroller with an 8031 core on board. I have not
* determined what function (if any) it provides. With the microcontroller
* and sync seperator chips a guess is that it might have to do with video
* switching and maybe some digital I/O.
*/
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
{
/* video mux */
gpio_bits(0x0f0000, input << 16);
}
static void tibetCS16_init(struct bttv *btv)
{
/* enable gpio bits, mask obtained via btSpy */
gpio_inout(0xffffff, 0x0f7fff);
gpio_write(0x0f7fff);
}
/*
* The following routines for the Kodicom-4400r get a little mind-twisting.
* There is a "master" controller and three "slave" controllers, together
* an analog switch which connects any of 16 cameras to any of the BT87A's.
* The analog switch is controlled by the "master", but the detection order
* of the four BT878A chips is in an order which I just don't understand.
* The "master" is actually the second controller to be detected. The
* logic on the board uses logical numbers for the 4 controlers, but
* those numbers are different from the detection sequence. When working
* with the analog switch, we need to "map" from the detection sequence
* over to the board's logical controller number. This mapping sequence
* is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
* unit 3, the second (which is the master) is logical unit 0, etc.
* We need to maintain the status of the analog switch (which of the 16
* cameras is connected to which of the 4 controllers). Rather than
* add to the bttv structure for this, we use the data reserved for
* the mbox (unused for this card type).
*/
/*
* First a routine to set the analog switch, which controls which camera
* is routed to which controller. The switch comprises an X-address
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
* A data value (gpio bit 7) of '1' enables the switch, and '0' disables
* the switch. A STROBE bit (gpio bit 8) latches the data value into the
* specified address. The idea is to set the address and data, then bring
* STROBE high, and finally bring STROBE back to low.
*/
static void kodicom4400r_write(struct bttv *btv,
unsigned char xaddr,
unsigned char yaddr,
unsigned char data) {
unsigned int udata;
udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
gpio_bits(0x1ff, udata); /* write ADDR and DAT */
gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
gpio_bits(0x1ff, udata); /* strobe low */
}
/*
* Next the mux select. Both the "master" and "slave" 'cards' (controllers)
* use this routine. The routine finds the "master" for the card, maps
* the controller number from the detected position over to the logical
* number, writes the appropriate data to the analog switch, and housekeeps
* the local copy of the switch information. The parameter 'input' is the
* requested camera number (0 - 15).
*/
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
{
char *sw_status;
int xaddr, yaddr;
struct bttv *mctlr;
static unsigned char map[4] = {3, 0, 2, 1};
mctlr = master[btv->c.nr];
if (mctlr == NULL) { /* ignore if master not yet detected */
return;
}
yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
yaddr = map[yaddr];
sw_status = (char *)(&mctlr->mbox_we);
xaddr = input & 0xf;
/* Check if the controller/camera pair has changed, else ignore */
if (sw_status[yaddr] != xaddr)
{
/* "open" the old switch, "close" the new one, save the new */
kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
sw_status[yaddr] = xaddr;
kodicom4400r_write(mctlr, xaddr, yaddr, 1);
}
}
/*
* During initialisation, we need to reset the analog switch. We
* also preset the switch to map the 4 connectors on the card to the
* *user's* (see above description of kodicom4400r_muxsel) channels
* 0 through 3
*/
static void kodicom4400r_init(struct bttv *btv)
{
char *sw_status = (char *)(&btv->mbox_we);
int ix;
gpio_inout(0x0003ff, 0x0003ff);
gpio_write(1 << 9); /* reset MUX */
gpio_write(0);
/* Preset camera 0 to the 4 controllers */
for (ix=0; ix<4; ix++) {
sw_status[ix] = ix;
kodicom4400r_write(btv, ix, ix, 1);
}
/*
* Since this is the "master", we need to set up the
* other three controller chips' pointers to this structure
* for later use in the muxsel routine.
*/
if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
return;
master[btv->c.nr-1] = btv;
master[btv->c.nr] = btv;
master[btv->c.nr+1] = btv;
master[btv->c.nr+2] = btv;
}
/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
* video multiplexers to provide up to 16 video inputs. These
* multiplexers are controlled by the lower 8 GPIO pins of the
* bt878. The multiplexers probably Pericom PI5V331Q or similar.
* xxx0 is pin xxx of multiplexer U5,
* yyy1 is pin yyy of multiplexer U2
*/
#define ENA0 0x01
#define ENB0 0x02
#define ENA1 0x04
#define ENB1 0x08
#define IN10 0x10
#define IN00 0x20
#define IN11 0x40
#define IN01 0x80
static void xguard_muxsel(struct bttv *btv, unsigned int input)
{
static const int masks[] = {
ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
};
gpio_write(masks[input%16]);
}
static void picolo_tetra_init(struct bttv *btv)
{
/*This is the video input redirection fonctionality : I DID NOT USED IT. */
btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
}
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
{
dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
/*GPIO[20]&GPIO[21] used to choose the right input*/
btwrite (input<<20,BT848_GPIO_DATA);
}
/*
* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
*
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
* swichers to provide 16 channels to MUX0. The TDA8540's have
* 4 indepedant outputs and as such the IVC120G also has the
* optional "Monitor Out" bus. This allows the card to be looking
* at one input while the monitor is looking at another.
*
* Since I've couldn't be bothered figuring out how to add an
* independant muxsel for the monitor bus, I've just set it to
* whatever the card is looking at.
*
* OUT0 of the TDA8540's is connected to MUX0 (0x03)
* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
*
* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
*
*/
/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
#define I2C_TDA8540 0x90
#define I2C_TDA8540_ALT1 0x92
#define I2C_TDA8540_ALT2 0x94
#define I2C_TDA8540_ALT3 0x96
#define I2C_TDA8540_ALT4 0x98
#define I2C_TDA8540_ALT5 0x9a
#define I2C_TDA8540_ALT6 0x9c
static void ivc120_muxsel(struct bttv *btv, unsigned int input)
{
/* Simple maths */
int key = input % 4;
int matrix = input / 4;
dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
btv->c.nr, input, matrix, key);
/* Handles the input selection on the TDA8540's */
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
((matrix == 3) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
((matrix == 0) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
((matrix == 1) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
((matrix == 2) ? (key | key << 2) : 0x00), 1);
/* Handles the output enables on the TDA8540's */
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
/* Selects MUX0 for input on the 878 */
btaor((0)<<5, ~(3<<5), BT848_IFORM);
}
/* PXC200 muxsel helper
* luke@syseng.anu.edu.au
* another transplant
* from Alessandro Rubini (rubini@linux.it)
*
* There are 4 kinds of cards:
* PXC200L which is bt848
* PXC200F which is bt848 with PIC controlling mux
* PXC200AL which is bt878
* PXC200AF which is bt878 with PIC controlling mux
*/
#define PX_CFG_PXC200F 0x01
#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
#define PX_I2C_PIC 0x0f
#define PX_PXC200A_CARDID 0x200a1295
#define PX_I2C_CMD_CFG 0x00
static void PXC200_muxsel(struct bttv *btv, unsigned int input)
{
int rc;
long mux;
int bitmask;
unsigned char buf[2];
/* Read PIC config to determine if this is a PXC200F */
/* PX_I2C_CMD_CFG*/
buf[0]=0;
buf[1]=0;
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
if (rc) {
printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
/* not PXC ? do nothing */
return;
}
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
if (!(rc & PX_CFG_PXC200F)) {
printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
return;
}
/* The multiplexer in the 200F is handled by the GPIO port */
/* get correct mapping between inputs */
/* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
/* ** not needed!? */
mux = input;
/* make sure output pins are enabled */
/* bitmask=0x30f; */
bitmask=0x302;
/* check whether we have a PXC200A */
if (btv->cardid == PX_PXC200A_CARDID) {
bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
bitmask |= 7<<4; /* the DAC */
}
btwrite(bitmask, BT848_GPIO_OUT_EN);
bitmask = btread(BT848_GPIO_DATA);
if (btv->cardid == PX_PXC200A_CARDID)
bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
else /* older device */
bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
btwrite(bitmask,BT848_GPIO_DATA);
/*
* Was "to be safe, set the bt848 to input 0"
* Actually, since it's ok at load time, better not messing
* with these bits (on PXC200AF you need to set mux 2 here)
*
* needed because bttv-driver sets mux before calling this function
*/
if (btv->cardid == PX_PXC200A_CARDID)
btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
else /* older device */
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
}
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
void __devinit bttv_check_chipset(void)
{
int pcipci_fail = 0;
struct pci_dev *dev = NULL;
if (pci_pci_problems & PCIPCI_FAIL)
pcipci_fail = 1;
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
triton1 = 1;
if (pci_pci_problems & PCIPCI_VSFX)
vsfx = 1;
#ifdef PCIPCI_ALIMAGIK
if (pci_pci_problems & PCIPCI_ALIMAGIK)
latency = 0x0A;
#endif
/* print warnings about any quirks found */
if (triton1)
printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
if (vsfx)
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
if (pcipci_fail) {
printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
if (!no_overlay) {
printk(KERN_WARNING "bttv: overlay will be disabled.\n");
no_overlay = 1;
} else {
printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
}
}
if (UNSET != latency)
printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82441, dev))) {
unsigned char b;
pci_read_config_byte(dev, 0x53, &b);
if (bttv_debug)
printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
"bufcon=0x%02x\n",b);
}
}
int __devinit bttv_handle_chipset(struct bttv *btv)
{
unsigned char command;
if (!triton1 && !vsfx && UNSET == latency)
return 0;
if (bttv_verbose) {
if (triton1)
printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
if (vsfx && btv->id >= 878)
printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
if (UNSET != latency)
printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
btv->c.nr,latency);
}
if (btv->id < 878) {
/* bt848 (mis)uses a bit in the irq mask for etbf */
if (triton1)
btv->triton1 = BT848_INT_ETBF;
} else {
/* bt878 has a bit in the pci config space for it */
pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
if (triton1)
command |= BT878_EN_TBFX;
if (vsfx)
command |= BT878_EN_VSFX;
pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
}
if (UNSET != latency)
pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
return 0;
}
/*
* Local variables:
* c-basic-offset: 8
* End:
*/