| /* |
| * SGI IOC3 master driver and IRQ demuxer |
| * |
| * Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org> |
| * Heavily based on similar work by: |
| * Brent Casavant <bcasavan@sgi.com> - IOC4 master driver |
| * Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/delay.h> |
| #include <linux/ioc3.h> |
| #include <linux/rwsem.h> |
| |
| #define IOC3_PCI_SIZE 0x100000 |
| |
| static LIST_HEAD(ioc3_devices); |
| static int ioc3_counter; |
| static DECLARE_RWSEM(ioc3_devices_rwsem); |
| |
| static struct ioc3_submodule *ioc3_submodules[IOC3_MAX_SUBMODULES]; |
| static struct ioc3_submodule *ioc3_ethernet; |
| static DEFINE_RWLOCK(ioc3_submodules_lock); |
| |
| /* NIC probing code */ |
| |
| #define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */ |
| |
| static inline unsigned mcr_pack(unsigned pulse, unsigned sample) |
| { |
| return (pulse << 10) | (sample << 2); |
| } |
| |
| static int nic_wait(struct ioc3_driver_data *idd) |
| { |
| unsigned mcr; |
| |
| do { |
| mcr = readl(&idd->vma->mcr); |
| } while (!(mcr & 2)); |
| |
| return mcr & 1; |
| } |
| |
| static int nic_reset(struct ioc3_driver_data *idd) |
| { |
| int presence; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| writel(mcr_pack(500, 65), &idd->vma->mcr); |
| presence = nic_wait(idd); |
| local_irq_restore(flags); |
| |
| udelay(500); |
| |
| return presence; |
| } |
| |
| static int nic_read_bit(struct ioc3_driver_data *idd) |
| { |
| int result; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| writel(mcr_pack(6, 13), &idd->vma->mcr); |
| result = nic_wait(idd); |
| local_irq_restore(flags); |
| |
| udelay(500); |
| |
| return result; |
| } |
| |
| static void nic_write_bit(struct ioc3_driver_data *idd, int bit) |
| { |
| if (bit) |
| writel(mcr_pack(6, 110), &idd->vma->mcr); |
| else |
| writel(mcr_pack(80, 30), &idd->vma->mcr); |
| |
| nic_wait(idd); |
| } |
| |
| static unsigned nic_read_byte(struct ioc3_driver_data *idd) |
| { |
| unsigned result = 0; |
| int i; |
| |
| for (i = 0; i < 8; i++) |
| result = (result >> 1) | (nic_read_bit(idd) << 7); |
| |
| return result; |
| } |
| |
| static void nic_write_byte(struct ioc3_driver_data *idd, int byte) |
| { |
| int i, bit; |
| |
| for (i = 8; i; i--) { |
| bit = byte & 1; |
| byte >>= 1; |
| |
| nic_write_bit(idd, bit); |
| } |
| } |
| |
| static unsigned long |
| nic_find(struct ioc3_driver_data *idd, int *last, unsigned long addr) |
| { |
| int a, b, index, disc; |
| |
| nic_reset(idd); |
| |
| /* Search ROM. */ |
| nic_write_byte(idd, 0xF0); |
| |
| /* Algorithm from ``Book of iButton Standards''. */ |
| for (index = 0, disc = 0; index < 64; index++) { |
| a = nic_read_bit(idd); |
| b = nic_read_bit(idd); |
| |
| if (a && b) { |
| printk(KERN_WARNING "IOC3 NIC search failed.\n"); |
| *last = 0; |
| return 0; |
| } |
| |
| if (!a && !b) { |
| if (index == *last) { |
| addr |= 1UL << index; |
| } else if (index > *last) { |
| addr &= ~(1UL << index); |
| disc = index; |
| } else if ((addr & (1UL << index)) == 0) |
| disc = index; |
| nic_write_bit(idd, (addr>>index)&1); |
| continue; |
| } else { |
| if (a) |
| addr |= 1UL << index; |
| else |
| addr &= ~(1UL << index); |
| nic_write_bit(idd, a); |
| continue; |
| } |
| } |
| *last = disc; |
| return addr; |
| } |
| |
| static void nic_addr(struct ioc3_driver_data *idd, unsigned long addr) |
| { |
| int index; |
| |
| nic_reset(idd); |
| nic_write_byte(idd, 0xF0); |
| for (index = 0; index < 64; index++) { |
| nic_read_bit(idd); |
| nic_read_bit(idd); |
| nic_write_bit(idd, (addr>>index)&1); |
| } |
| } |
| |
| static void crc16_byte(unsigned int *crc, unsigned char db) |
| { |
| int i; |
| |
| for(i=0;i<8;i++) { |
| *crc <<= 1; |
| if((db^(*crc>>16)) & 1) |
| *crc ^= 0x8005; |
| db >>= 1; |
| } |
| *crc &= 0xFFFF; |
| } |
| |
| static unsigned int crc16_area(unsigned char *dbs, int size, unsigned int crc) |
| { |
| while(size--) |
| crc16_byte(&crc, *(dbs++)); |
| return crc; |
| } |
| |
| static void crc8_byte(unsigned int *crc, unsigned char db) |
| { |
| int i,f; |
| |
| for(i=0;i<8;i++) { |
| f = (*crc ^ db) & 1; |
| *crc >>= 1; |
| db >>= 1; |
| if(f) |
| *crc ^= 0x8c; |
| } |
| *crc &= 0xff; |
| } |
| |
| static unsigned int crc8_addr(unsigned long addr) |
| { |
| int i; |
| unsigned int crc = 0x00; |
| |
| for(i=0;i<8;i++) |
| crc8_byte(&crc, addr>>(i<<3)); |
| return crc; |
| } |
| |
| static void |
| read_redir_page(struct ioc3_driver_data *idd, unsigned long addr, int page, |
| unsigned char *redir, unsigned char *data) |
| { |
| int loops = 16, i; |
| |
| while(redir[page] != 0xFF) { |
| page = redir[page]^0xFF; |
| loops--; |
| if(loops<0) { |
| printk(KERN_ERR "IOC3: NIC circular redirection\n"); |
| return; |
| } |
| } |
| loops = 3; |
| while(loops>0) { |
| nic_addr(idd, addr); |
| nic_write_byte(idd, 0xF0); |
| nic_write_byte(idd, (page << 5) & 0xE0); |
| nic_write_byte(idd, (page >> 3) & 0x1F); |
| for(i=0;i<0x20;i++) |
| data[i] = nic_read_byte(idd); |
| if(crc16_area(data, 0x20, 0x0000) == 0x800d) |
| return; |
| loops--; |
| } |
| printk(KERN_ERR "IOC3: CRC error in data page\n"); |
| for(i=0;i<0x20;i++) |
| data[i] = 0x00; |
| } |
| |
| static void |
| read_redir_map(struct ioc3_driver_data *idd, unsigned long addr, |
| unsigned char *redir) |
| { |
| int i,j,loops = 3,crc_ok; |
| unsigned int crc; |
| |
| while(loops>0) { |
| crc_ok = 1; |
| nic_addr(idd, addr); |
| nic_write_byte(idd, 0xAA); |
| nic_write_byte(idd, 0x00); |
| nic_write_byte(idd, 0x01); |
| for(i=0;i<64;i+=8) { |
| for(j=0;j<8;j++) |
| redir[i+j] = nic_read_byte(idd); |
| crc = crc16_area(redir+i, 8, (i==0)?0x8707:0x0000); |
| crc16_byte(&crc, nic_read_byte(idd)); |
| crc16_byte(&crc, nic_read_byte(idd)); |
| if(crc != 0x800d) |
| crc_ok = 0; |
| } |
| if(crc_ok) |
| return; |
| loops--; |
| } |
| printk(KERN_ERR "IOC3: CRC error in redirection page\n"); |
| for(i=0;i<64;i++) |
| redir[i] = 0xFF; |
| } |
| |
| static void read_nic(struct ioc3_driver_data *idd, unsigned long addr) |
| { |
| unsigned char redir[64]; |
| unsigned char data[64],part[32]; |
| int i,j; |
| |
| /* read redirections */ |
| read_redir_map(idd, addr, redir); |
| /* read data pages */ |
| read_redir_page(idd, addr, 0, redir, data); |
| read_redir_page(idd, addr, 1, redir, data+32); |
| /* assemble the part # */ |
| j=0; |
| for(i=0;i<19;i++) |
| if(data[i+11] != ' ') |
| part[j++] = data[i+11]; |
| for(i=0;i<6;i++) |
| if(data[i+32] != ' ') |
| part[j++] = data[i+32]; |
| part[j] = 0; |
| /* skip Octane power supplies */ |
| if(!strncmp(part, "060-0035-", 9)) |
| return; |
| if(!strncmp(part, "060-0038-", 9)) |
| return; |
| strcpy(idd->nic_part, part); |
| /* assemble the serial # */ |
| j=0; |
| for(i=0;i<10;i++) |
| if(data[i+1] != ' ') |
| idd->nic_serial[j++] = data[i+1]; |
| idd->nic_serial[j] = 0; |
| } |
| |
| static void read_mac(struct ioc3_driver_data *idd, unsigned long addr) |
| { |
| int i, loops = 3; |
| unsigned char data[13]; |
| |
| while(loops>0) { |
| nic_addr(idd, addr); |
| nic_write_byte(idd, 0xF0); |
| nic_write_byte(idd, 0x00); |
| nic_write_byte(idd, 0x00); |
| nic_read_byte(idd); |
| for(i=0;i<13;i++) |
| data[i] = nic_read_byte(idd); |
| if(crc16_area(data, 13, 0x0000) == 0x800d) { |
| for(i=10;i>4;i--) |
| idd->nic_mac[10-i] = data[i]; |
| return; |
| } |
| loops--; |
| } |
| printk(KERN_ERR "IOC3: CRC error in MAC address\n"); |
| for(i=0;i<6;i++) |
| idd->nic_mac[i] = 0x00; |
| } |
| |
| static void probe_nic(struct ioc3_driver_data *idd) |
| { |
| int save = 0, loops = 3; |
| unsigned long first, addr; |
| |
| writel(GPCR_MLAN_EN, &idd->vma->gpcr_s); |
| |
| while(loops>0) { |
| idd->nic_part[0] = 0; |
| idd->nic_serial[0] = 0; |
| addr = first = nic_find(idd, &save, 0); |
| if(!first) |
| return; |
| while(1) { |
| if(crc8_addr(addr)) |
| break; |
| else { |
| switch(addr & 0xFF) { |
| case 0x0B: |
| read_nic(idd, addr); |
| break; |
| case 0x09: |
| case 0x89: |
| case 0x91: |
| read_mac(idd, addr); |
| break; |
| } |
| } |
| addr = nic_find(idd, &save, addr); |
| if(addr == first) |
| return; |
| } |
| loops--; |
| } |
| printk(KERN_ERR "IOC3: CRC error in NIC address\n"); |
| } |
| |
| /* Interrupts */ |
| |
| static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&idd->ir_lock, flags); |
| switch (which) { |
| case IOC3_W_IES: |
| writel(val, &idd->vma->sio_ies); |
| break; |
| case IOC3_W_IEC: |
| writel(val, &idd->vma->sio_iec); |
| break; |
| } |
| spin_unlock_irqrestore(&idd->ir_lock, flags); |
| } |
| static inline uint32_t get_pending_intrs(struct ioc3_driver_data *idd) |
| { |
| unsigned long flag; |
| uint32_t intrs = 0; |
| |
| spin_lock_irqsave(&idd->ir_lock, flag); |
| intrs = readl(&idd->vma->sio_ir); |
| intrs &= readl(&idd->vma->sio_ies); |
| spin_unlock_irqrestore(&idd->ir_lock, flag); |
| return intrs; |
| } |
| |
| static irqreturn_t ioc3_intr_io(int irq, void *arg) |
| { |
| unsigned long flags; |
| struct ioc3_driver_data *idd = arg; |
| int handled = 1, id; |
| unsigned int pending; |
| |
| read_lock_irqsave(&ioc3_submodules_lock, flags); |
| |
| if(idd->dual_irq && readb(&idd->vma->eisr)) { |
| /* send Ethernet IRQ to the driver */ |
| if(ioc3_ethernet && idd->active[ioc3_ethernet->id] && |
| ioc3_ethernet->intr) { |
| handled = handled && !ioc3_ethernet->intr(ioc3_ethernet, |
| idd, 0); |
| } |
| } |
| pending = get_pending_intrs(idd); /* look at the IO IRQs */ |
| |
| for(id=0;id<IOC3_MAX_SUBMODULES;id++) { |
| if(idd->active[id] && ioc3_submodules[id] |
| && (pending & ioc3_submodules[id]->irq_mask) |
| && ioc3_submodules[id]->intr) { |
| write_ireg(idd, ioc3_submodules[id]->irq_mask, |
| IOC3_W_IEC); |
| if(!ioc3_submodules[id]->intr(ioc3_submodules[id], |
| idd, pending & ioc3_submodules[id]->irq_mask)) |
| pending &= ~ioc3_submodules[id]->irq_mask; |
| if (ioc3_submodules[id]->reset_mask) |
| write_ireg(idd, ioc3_submodules[id]->irq_mask, |
| IOC3_W_IES); |
| } |
| } |
| read_unlock_irqrestore(&ioc3_submodules_lock, flags); |
| if(pending) { |
| printk(KERN_WARNING |
| "IOC3: Pending IRQs 0x%08x discarded and disabled\n",pending); |
| write_ireg(idd, pending, IOC3_W_IEC); |
| handled = 1; |
| } |
| return handled?IRQ_HANDLED:IRQ_NONE; |
| } |
| |
| static irqreturn_t ioc3_intr_eth(int irq, void *arg) |
| { |
| unsigned long flags; |
| struct ioc3_driver_data *idd = (struct ioc3_driver_data *)arg; |
| int handled = 1; |
| |
| if(!idd->dual_irq) |
| return IRQ_NONE; |
| read_lock_irqsave(&ioc3_submodules_lock, flags); |
| if(ioc3_ethernet && idd->active[ioc3_ethernet->id] |
| && ioc3_ethernet->intr) |
| handled = handled && !ioc3_ethernet->intr(ioc3_ethernet, idd, 0); |
| read_unlock_irqrestore(&ioc3_submodules_lock, flags); |
| return handled?IRQ_HANDLED:IRQ_NONE; |
| } |
| |
| void ioc3_enable(struct ioc3_submodule *is, |
| struct ioc3_driver_data *idd, unsigned int irqs) |
| { |
| write_ireg(idd, irqs & is->irq_mask, IOC3_W_IES); |
| } |
| |
| void ioc3_ack(struct ioc3_submodule *is, struct ioc3_driver_data *idd, |
| unsigned int irqs) |
| { |
| writel(irqs & is->irq_mask, &idd->vma->sio_ir); |
| } |
| |
| void ioc3_disable(struct ioc3_submodule *is, |
| struct ioc3_driver_data *idd, unsigned int irqs) |
| { |
| write_ireg(idd, irqs & is->irq_mask, IOC3_W_IEC); |
| } |
| |
| void ioc3_gpcr_set(struct ioc3_driver_data *idd, unsigned int val) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&idd->gpio_lock, flags); |
| writel(val, &idd->vma->gpcr_s); |
| spin_unlock_irqrestore(&idd->gpio_lock, flags); |
| } |
| |
| /* Keep it simple, stupid! */ |
| static int find_slot(void **tab, int max) |
| { |
| int i; |
| for(i=0;i<max;i++) |
| if(!(tab[i])) |
| return i; |
| return -1; |
| } |
| |
| /* Register an IOC3 submodule */ |
| int ioc3_register_submodule(struct ioc3_submodule *is) |
| { |
| struct ioc3_driver_data *idd; |
| int alloc_id; |
| unsigned long flags; |
| |
| write_lock_irqsave(&ioc3_submodules_lock, flags); |
| alloc_id = find_slot((void **)ioc3_submodules, IOC3_MAX_SUBMODULES); |
| if(alloc_id != -1) { |
| ioc3_submodules[alloc_id] = is; |
| if(is->ethernet) { |
| if(ioc3_ethernet==NULL) |
| ioc3_ethernet=is; |
| else |
| printk(KERN_WARNING |
| "IOC3 Ethernet module already registered!\n"); |
| } |
| } |
| write_unlock_irqrestore(&ioc3_submodules_lock, flags); |
| |
| if(alloc_id == -1) { |
| printk(KERN_WARNING "Increase IOC3_MAX_SUBMODULES!\n"); |
| return -ENOMEM; |
| } |
| |
| is->id=alloc_id; |
| |
| /* Initialize submodule for each IOC3 */ |
| if (!is->probe) |
| return 0; |
| |
| down_read(&ioc3_devices_rwsem); |
| list_for_each_entry(idd, &ioc3_devices, list) { |
| /* set to 1 for IRQs in probe */ |
| idd->active[alloc_id] = 1; |
| idd->active[alloc_id] = !is->probe(is, idd); |
| } |
| up_read(&ioc3_devices_rwsem); |
| |
| return 0; |
| } |
| |
| /* Unregister an IOC3 submodule */ |
| void ioc3_unregister_submodule(struct ioc3_submodule *is) |
| { |
| struct ioc3_driver_data *idd; |
| unsigned long flags; |
| |
| write_lock_irqsave(&ioc3_submodules_lock, flags); |
| if(ioc3_submodules[is->id]==is) |
| ioc3_submodules[is->id]=NULL; |
| else |
| printk(KERN_WARNING |
| "IOC3 submodule %s has wrong ID.\n",is->name); |
| if(ioc3_ethernet==is) |
| ioc3_ethernet = NULL; |
| write_unlock_irqrestore(&ioc3_submodules_lock, flags); |
| |
| /* Remove submodule for each IOC3 */ |
| down_read(&ioc3_devices_rwsem); |
| list_for_each_entry(idd, &ioc3_devices, list) |
| if(idd->active[is->id]) { |
| if(is->remove) |
| if(is->remove(is, idd)) |
| printk(KERN_WARNING |
| "%s: IOC3 submodule %s remove failed " |
| "for pci_dev %s.\n", |
| __FUNCTION__, module_name(is->owner), |
| pci_name(idd->pdev)); |
| idd->active[is->id] = 0; |
| if(is->irq_mask) |
| write_ireg(idd, is->irq_mask, IOC3_W_IEC); |
| } |
| up_read(&ioc3_devices_rwsem); |
| } |
| |
| /********************* |
| * Device management * |
| *********************/ |
| |
| static char * |
| ioc3_class_names[]={"unknown", "IP27 BaseIO", "IP30 system", "MENET 1/2/3", |
| "MENET 4", "CADduo", "Altix Serial"}; |
| |
| static int ioc3_class(struct ioc3_driver_data *idd) |
| { |
| int res = IOC3_CLASS_NONE; |
| /* NIC-based logic */ |
| if(!strncmp(idd->nic_part, "030-0891-", 9)) |
| res = IOC3_CLASS_BASE_IP30; |
| if(!strncmp(idd->nic_part, "030-1155-", 9)) |
| res = IOC3_CLASS_CADDUO; |
| if(!strncmp(idd->nic_part, "030-1657-", 9)) |
| res = IOC3_CLASS_SERIAL; |
| if(!strncmp(idd->nic_part, "030-1664-", 9)) |
| res = IOC3_CLASS_SERIAL; |
| /* total random heuristics */ |
| #ifdef CONFIG_SGI_IP27 |
| if(!idd->nic_part[0]) |
| res = IOC3_CLASS_BASE_IP27; |
| #endif |
| /* print educational message */ |
| printk(KERN_INFO "IOC3 part: [%s], serial: [%s] => class %s\n", |
| idd->nic_part, idd->nic_serial, ioc3_class_names[res]); |
| return res; |
| } |
| /* Adds a new instance of an IOC3 card */ |
| static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) |
| { |
| struct ioc3_driver_data *idd; |
| uint32_t pcmd; |
| int ret, id; |
| |
| /* Enable IOC3 and take ownership of it */ |
| if ((ret = pci_enable_device(pdev))) { |
| printk(KERN_WARNING |
| "%s: Failed to enable IOC3 device for pci_dev %s.\n", |
| __FUNCTION__, pci_name(pdev)); |
| goto out; |
| } |
| pci_set_master(pdev); |
| |
| #ifdef USE_64BIT_DMA |
| ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK); |
| if (!ret) { |
| ret = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); |
| if (ret < 0) { |
| printk(KERN_WARNING "%s: Unable to obtain 64 bit DMA " |
| "for consistent allocations\n", |
| __FUNCTION__); |
| } |
| } |
| #endif |
| |
| /* Set up per-IOC3 data */ |
| idd = kzalloc(sizeof(struct ioc3_driver_data), GFP_KERNEL); |
| if (!idd) { |
| printk(KERN_WARNING |
| "%s: Failed to allocate IOC3 data for pci_dev %s.\n", |
| __FUNCTION__, pci_name(pdev)); |
| ret = -ENODEV; |
| goto out_idd; |
| } |
| spin_lock_init(&idd->ir_lock); |
| spin_lock_init(&idd->gpio_lock); |
| idd->pdev = pdev; |
| |
| /* Map all IOC3 registers. These are shared between subdevices |
| * so the main IOC3 module manages them. |
| */ |
| idd->pma = pci_resource_start(pdev, 0); |
| if (!idd->pma) { |
| printk(KERN_WARNING |
| "%s: Unable to find IOC3 resource " |
| "for pci_dev %s.\n", |
| __FUNCTION__, pci_name(pdev)); |
| ret = -ENODEV; |
| goto out_pci; |
| } |
| if (!request_mem_region(idd->pma, IOC3_PCI_SIZE, "ioc3")) { |
| printk(KERN_WARNING |
| "%s: Unable to request IOC3 region " |
| "for pci_dev %s.\n", |
| __FUNCTION__, pci_name(pdev)); |
| ret = -ENODEV; |
| goto out_pci; |
| } |
| idd->vma = ioremap(idd->pma, IOC3_PCI_SIZE); |
| if (!idd->vma) { |
| printk(KERN_WARNING |
| "%s: Unable to remap IOC3 region " |
| "for pci_dev %s.\n", |
| __FUNCTION__, pci_name(pdev)); |
| ret = -ENODEV; |
| goto out_misc_region; |
| } |
| |
| /* Track PCI-device specific data */ |
| pci_set_drvdata(pdev, idd); |
| down_write(&ioc3_devices_rwsem); |
| list_add_tail(&idd->list, &ioc3_devices); |
| idd->id = ioc3_counter++; |
| up_write(&ioc3_devices_rwsem); |
| |
| idd->gpdr_shadow = readl(&idd->vma->gpdr); |
| |
| /* Read IOC3 NIC contents */ |
| probe_nic(idd); |
| |
| /* Detect IOC3 class */ |
| idd->class = ioc3_class(idd); |
| |
| /* Initialize IOC3 */ |
| pci_read_config_dword(pdev, PCI_COMMAND, &pcmd); |
| pci_write_config_dword(pdev, PCI_COMMAND, |
| pcmd | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR | |
| PCI_SCR_DROP_MODE_EN); |
| |
| write_ireg(idd, ~0, IOC3_W_IEC); |
| writel(~0, &idd->vma->sio_ir); |
| |
| /* Set up IRQs */ |
| if(idd->class == IOC3_CLASS_BASE_IP30 |
| || idd->class == IOC3_CLASS_BASE_IP27) { |
| writel(0, &idd->vma->eier); |
| writel(~0, &idd->vma->eisr); |
| |
| idd->dual_irq = 1; |
| if (!request_irq(pdev->irq, ioc3_intr_eth, IRQF_SHARED, |
| "ioc3-eth", (void *)idd)) { |
| idd->irq_eth = pdev->irq; |
| } else { |
| printk(KERN_WARNING |
| "%s : request_irq fails for IRQ 0x%x\n ", |
| __FUNCTION__, pdev->irq); |
| } |
| if (!request_irq(pdev->irq+2, ioc3_intr_io, IRQF_SHARED, |
| "ioc3-io", (void *)idd)) { |
| idd->irq_io = pdev->irq+2; |
| } else { |
| printk(KERN_WARNING |
| "%s : request_irq fails for IRQ 0x%x\n ", |
| __FUNCTION__, pdev->irq+2); |
| } |
| } else { |
| if (!request_irq(pdev->irq, ioc3_intr_io, IRQF_SHARED, |
| "ioc3", (void *)idd)) { |
| idd->irq_io = pdev->irq; |
| } else { |
| printk(KERN_WARNING |
| "%s : request_irq fails for IRQ 0x%x\n ", |
| __FUNCTION__, pdev->irq); |
| } |
| } |
| |
| /* Add this IOC3 to all submodules */ |
| for(id=0;id<IOC3_MAX_SUBMODULES;id++) |
| if(ioc3_submodules[id] && ioc3_submodules[id]->probe) { |
| idd->active[id] = 1; |
| idd->active[id] = !ioc3_submodules[id]->probe |
| (ioc3_submodules[id], idd); |
| } |
| |
| printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev)); |
| |
| return 0; |
| |
| out_misc_region: |
| release_mem_region(idd->pma, IOC3_PCI_SIZE); |
| out_pci: |
| kfree(idd); |
| out_idd: |
| pci_disable_device(pdev); |
| out: |
| return ret; |
| } |
| |
| /* Removes a particular instance of an IOC3 card. */ |
| static void ioc3_remove(struct pci_dev *pdev) |
| { |
| int id; |
| struct ioc3_driver_data *idd; |
| |
| idd = pci_get_drvdata(pdev); |
| |
| /* Remove this IOC3 from all submodules */ |
| for(id=0;id<IOC3_MAX_SUBMODULES;id++) |
| if(idd->active[id]) { |
| if(ioc3_submodules[id] && ioc3_submodules[id]->remove) |
| if(ioc3_submodules[id]->remove(ioc3_submodules[id], |
| idd)) |
| printk(KERN_WARNING |
| "%s: IOC3 submodule 0x%s remove failed " |
| "for pci_dev %s.\n", |
| __FUNCTION__, |
| module_name(ioc3_submodules[id]->owner), |
| pci_name(pdev)); |
| idd->active[id] = 0; |
| } |
| |
| /* Clear and disable all IRQs */ |
| write_ireg(idd, ~0, IOC3_W_IEC); |
| writel(~0, &idd->vma->sio_ir); |
| |
| /* Release resources */ |
| free_irq(idd->irq_io, (void *)idd); |
| if(idd->dual_irq) |
| free_irq(idd->irq_eth, (void *)idd); |
| iounmap(idd->vma); |
| release_mem_region(idd->pma, IOC3_PCI_SIZE); |
| |
| /* Disable IOC3 and relinquish */ |
| pci_disable_device(pdev); |
| |
| /* Remove and free driver data */ |
| down_write(&ioc3_devices_rwsem); |
| list_del(&idd->list); |
| up_write(&ioc3_devices_rwsem); |
| kfree(idd); |
| } |
| |
| static struct pci_device_id ioc3_id_table[] = { |
| {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID}, |
| {0} |
| }; |
| |
| static struct pci_driver ioc3_driver = { |
| .name = "IOC3", |
| .id_table = ioc3_id_table, |
| .probe = ioc3_probe, |
| .remove = ioc3_remove, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ioc3_id_table); |
| |
| /********************* |
| * Module management * |
| *********************/ |
| |
| /* Module load */ |
| static int __devinit ioc3_init(void) |
| { |
| if (ia64_platform_is("sn2")) |
| return pci_register_driver(&ioc3_driver); |
| return 0; |
| } |
| |
| /* Module unload */ |
| static void __devexit ioc3_exit(void) |
| { |
| pci_unregister_driver(&ioc3_driver); |
| } |
| |
| module_init(ioc3_init); |
| module_exit(ioc3_exit); |
| |
| MODULE_AUTHOR("Stanislaw Skowronek <skylark@linux-mips.org>"); |
| MODULE_DESCRIPTION("PCI driver for SGI IOC3"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL_GPL(ioc3_register_submodule); |
| EXPORT_SYMBOL_GPL(ioc3_unregister_submodule); |
| EXPORT_SYMBOL_GPL(ioc3_ack); |
| EXPORT_SYMBOL_GPL(ioc3_gpcr_set); |
| EXPORT_SYMBOL_GPL(ioc3_disable); |
| EXPORT_SYMBOL_GPL(ioc3_enable); |