blob: ff7af32da02cde39103e0fa65cea9bb93b8ee4ba [file] [log] [blame]
/*
* Idle processing for ARMv7-based Qualcomm SoCs.
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2009, 2011-2012 Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/linkage.h>
#include <linux/threads.h>
#include <asm/assembler.h>
#include "idle.h"
#include "idle-macros.S"
#ifdef CONFIG_ARCH_MSM_KRAIT
#define SCM_SVC_BOOT 0x1
#define SCM_CMD_TERMINATE_PC 0x2
#endif
ENTRY(msm_arch_idle)
#ifdef CONFIG_ARCH_MSM_KRAIT
mrc p15, 0, r0, c0, c0, 0
bic r1, r0, #0xff
movw r2, #0x0400
movt r2, #0x511F
movw r3, #0x0600
movt r3, #0x510F
cmp r2, r1
cmpne r3, r1
bne go_wfi
mrs r0, cpsr
cpsid if
mrc p15, 7, r1, c15, c0, 5
bic r2, r1, #0x20000
mcr p15, 7, r2, c15, c0, 5
isb
go_wfi:
wfi
bne wfi_done
mcr p15, 7, r1, c15, c0, 5
isb
msr cpsr_c, r0
wfi_done:
bx lr
#else
wfi
#ifdef CONFIG_ARCH_MSM8X60
mrc p14, 1, r1, c1, c5, 4 /* read ETM PDSR to clear sticky bit */
mrc p14, 0, r1, c1, c5, 4 /* read DBG PRSR to clear sticky bit */
isb
#endif
bx lr
#endif
ENTRY(msm_pm_collapse)
#if defined(CONFIG_MSM_FIQ_SUPPORT)
cpsid f
#endif
ldr r0, =msm_saved_state /* address of msm_saved_state ptr */
ldr r0, [r0] /* load ptr */
#if (NR_CPUS >= 2)
mrc p15, 0, r1, c0, c0, 5 /* MPIDR */
ands r1, r1, #15 /* What CPU am I */
mov r2, #CPU_SAVED_STATE_SIZE
mul r1, r1, r2
add r0, r0, r1
#endif
stmia r0!, {r4-r14}
mrc p15, 0, r1, c1, c0, 0 /* MMU control */
mrc p15, 0, r2, c2, c0, 0 /* TTBR0 */
mrc p15, 0, r3, c3, c0, 0 /* dacr */
#ifdef CONFIG_ARCH_MSM_SCORPION
/* This instruction is not valid for non scorpion processors */
mrc p15, 3, r4, c15, c0, 3 /* L2CR1 is the L2 cache control reg 1 */
#endif
mrc p15, 0, r5, c10, c2, 0 /* PRRR */
mrc p15, 0, r6, c10, c2, 1 /* NMRR */
mrc p15, 0, r7, c1, c0, 1 /* ACTLR */
mrc p15, 0, r8, c2, c0, 1 /* TTBR1 */
mrc p15, 0, r9, c13, c0, 3 /* TPIDRURO */
mrc p15, 0, ip, c13, c0, 1 /* context ID */
stmia r0!, {r1-r9, ip}
#ifdef CONFIG_MSM_CPU_AVS
mrc p15, 7, r1, c15, c1, 7 /* AVSCSR is the Adaptive Voltage Scaling
* Control and Status Register */
mrc p15, 7, r2, c15, c0, 6 /* AVSDSCR is the Adaptive Voltage
* Scaling Delay Synthesizer Control
* Register */
#ifndef CONFIG_ARCH_MSM_KRAIT
mrc p15, 7, r3, c15, c1, 0 /* TSCSR is the Temperature Status and
* Control Register
*/
#endif
stmia r0!, {r1-r3}
#endif
#ifdef CONFIG_MSM_JTAG
bl msm_jtag_save_state
#endif
ldr r0, =msm_pm_flush_l2_flag
ldr r0, [r0]
mov r1, #0
mcr p15, 2, r1, c0, c0, 0 /*CCSELR*/
isb
mrc p15, 1, r1, c0, c0, 0 /*CCSIDR*/
mov r2, #1
and r1, r2, r1, ASR #30 /* Check if the cache is write back */
orr r1, r0, r1
cmp r1, #1
bne skip
bl v7_flush_dcache_all
skip:
#ifdef CONFIG_ARCH_MSM_KRAIT
ldr r0, =SCM_SVC_BOOT
ldr r1, =SCM_CMD_TERMINATE_PC
ldr r2, =msm_pm_flush_l2_flag
ldr r2, [r2]
bl scm_call_atomic1
#else
mrc p15, 0, r4, c1, c0, 0 /* read current CR */
bic r0, r4, #(1 << 2) /* clear dcache bit */
bic r0, r0, #(1 << 12) /* clear icache bit */
mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
isb
SUSPEND_8x25_L2
SET_SMP_COHERENCY OFF
wfi
DELAY_8x25 300
mcr p15, 0, r4, c1, c0, 0 /* restore d/i cache */
isb
ENABLE_8x25_L2 /* enable only l2, no need to restore the reg back */
SET_SMP_COHERENCY ON
#endif
#if defined(CONFIG_MSM_FIQ_SUPPORT)
cpsie f
#endif
#ifdef CONFIG_MSM_JTAG
bl msm_jtag_restore_state
#endif
ldr r0, =msm_saved_state /* address of msm_saved_state ptr */
ldr r0, [r0] /* load ptr */
#if (NR_CPUS >= 2)
mrc p15, 0, r1, c0, c0, 5 /* MPIDR */
ands r1, r1, #15 /* What CPU am I */
mov r2, #CPU_SAVED_STATE_SIZE
mul r2, r2, r1
add r0, r0, r2
#endif
ldmfd r0, {r4-r14} /* restore registers */
mov r0, #0 /* return power collapse failed */
bx lr
ENTRY(msm_pm_collapse_exit)
#if 0 /* serial debug */
mov r0, #0x80000016
mcr p15, 0, r0, c15, c2, 4
mov r0, #0xA9000000
add r0, r0, #0x00A00000 /* UART1 */
/*add r0, r0, #0x00C00000*/ /* UART3 */
mov r1, #'A'
str r1, [r0, #0x00C]
#endif
ldr r1, =msm_saved_state_phys
ldr r2, =msm_pm_collapse_exit
adr r3, msm_pm_collapse_exit
add r1, r1, r3
sub r1, r1, r2
ldr r1, [r1]
add r1, r1, #CPU_SAVED_STATE_SIZE
#if (NR_CPUS >= 2)
mrc p15, 0, r2, c0, c0, 5 /* MPIDR */
ands r2, r2, #15 /* What CPU am I */
mov r3, #CPU_SAVED_STATE_SIZE
mul r2, r2, r3
add r1, r1, r2
#endif
#ifdef CONFIG_MSM_CPU_AVS
ldmdb r1!, {r2-r4}
#ifndef CONFIG_ARCH_MSM_KRAIT
mcr p15, 7, r4, c15, c1, 0 /* TSCSR */
#endif
mcr p15, 7, r3, c15, c0, 6 /* AVSDSCR */
mcr p15, 7, r2, c15, c1, 7 /* AVSCSR */
#endif
ldmdb r1!, {r2-r11}
mcr p15, 0, r4, c3, c0, 0 /* dacr */
mcr p15, 0, r3, c2, c0, 0 /* TTBR0 */
#ifdef CONFIG_ARCH_MSM_SCORPION
/* This instruction is not valid for non scorpion processors */
mcr p15, 3, r5, c15, c0, 3 /* L2CR1 */
#endif
mcr p15, 0, r6, c10, c2, 0 /* PRRR */
mcr p15, 0, r7, c10, c2, 1 /* NMRR */
mcr p15, 0, r8, c1, c0, 1 /* ACTLR */
mcr p15, 0, r9, c2, c0, 1 /* TTBR1 */
mcr p15, 0, r10, c13, c0, 3 /* TPIDRURO */
mcr p15, 0, r11, c13, c0, 1 /* context ID */
isb
ldmdb r1!, {r4-r14}
ldr r0, =msm_pm_pc_pgd
ldr r1, =msm_pm_collapse_exit
adr r3, msm_pm_collapse_exit
add r0, r0, r3
sub r0, r0, r1
ldr r0, [r0]
mrc p15, 0, r1, c2, c0, 0 /* save current TTBR0 */
and r3, r1, #0x7f /* mask to get TTB flags */
orr r0, r0, r3 /* add TTB flags to switch TTBR value */
mcr p15, 0, r0, c2, c0, 0 /* temporary switch TTBR0 */
isb
mcr p15, 0, r2, c1, c0, 0 /* MMU control */
isb
msm_pm_mapped_pa:
/* Switch to virtual */
ldr r0, =msm_pm_pa_to_va
mov pc, r0
msm_pm_pa_to_va:
mcr p15, 0, r1, c2, c0, 0 /* restore TTBR0 */
isb
mcr p15, 0, r3, c8, c7, 0 /* UTLBIALL */
mcr p15, 0, r3, c7, c5, 6 /* BPIALL */
dsb
isb
#ifdef CONFIG_ARCH_MSM_KRAIT
mrc p15, 0, r1, c0, c0, 0
ldr r3, =0xff00fc00
and r3, r1, r3
ldr r1, =0x51000400
cmp r3, r1
mrceq p15, 7, r3, c15, c0, 2
biceq r3, r3, #0x400
mcreq p15, 7, r3, c15, c0, 2
#else
RESUME_8x25_L2
SET_SMP_COHERENCY ON
#endif
#ifdef CONFIG_MSM_JTAG
stmfd sp!, {lr}
bl msm_jtag_restore_state
ldmfd sp!, {lr}
#endif
mov r0, #1
bx lr
nop
nop
nop
nop
nop
1: b 1b
ENTRY(msm_pm_boot_entry)
mrc p15, 0, r0, c0, c0, 5 /* MPIDR */
and r0, r0, #15 /* what CPU am I */
ldr r1, =msm_pm_boot_vector
ldr r2, =msm_pm_boot_entry
adr r3, msm_pm_boot_entry
add r1, r1, r3 /* translate virt to phys addr */
sub r1, r1, r2
add r1, r1, r0, LSL #2 /* locate boot vector for our cpu */
ldr pc, [r1] /* jump */
ENTRY(msm_pm_set_l2_flush_flag)
ldr r1, =msm_pm_flush_l2_flag
str r0, [r1]
bx lr
.data
.globl msm_pm_pc_pgd
msm_pm_pc_pgd:
.long 0x0
.globl msm_saved_state
msm_saved_state:
.long 0x0
.globl msm_saved_state_phys
msm_saved_state_phys:
.long 0x0
.globl msm_pm_boot_vector
msm_pm_boot_vector:
.space 4 * NR_CPUS
.globl target_type
target_type:
.long 0x0
.globl apps_power_collapse
apps_power_collapse:
.long 0x0
.globl l2x0_base_addr
l2x0_base_addr:
.long 0x0
/*
* Default the l2 flush flag to 1 so that caches are flushed during power
* collapse unless the L2 driver decides to flush them only during L2
* Power collapse.
*/
msm_pm_flush_l2_flag:
.long 0x1
/*
* Save & restore l2x0 registers while system is entering and resuming
* from Power Collapse.
* 1. aux_ctrl_save (0x0)
* 2. data_latency_ctrl (0x4)
* 3. prefetch control (0x8)
*/
l2x0_saved_ctrl_reg_val:
.space 4 * 3