| /* |
| * Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <mach/proc_comm.h> |
| #include "proccomm-regulator.h" |
| |
| #define MV_TO_UV(mv) ((mv)*1000) |
| #define UV_TO_MV(uv) (((uv)+999)/1000) |
| |
| /* |
| * Wrappers for the msm_proc_comm() calls. |
| * Does basic impedance matching between what the proccomm interface |
| * expects and how the driver sees the world. |
| */ |
| |
| /* Converts a proccomm error to an errno value. */ |
| static int _pcom_err_to_linux_errno(unsigned error) |
| { |
| if (!error) /* 0 == no error */ |
| return 0; |
| else if (error & 0x1F) /* bits 0..4 => parameter 1..5 out of range */ |
| return -EDOM; |
| else if (error & 0x100) /* bit 8 => feature not supported */ |
| return -ENOSYS; |
| else /* anything else non-zero: unknown error */ |
| return -EINVAL; |
| } |
| |
| /* vreg_switch: (vreg ID, on/off) => (return code, <null>) */ |
| static int _vreg_switch(int vreg_id, bool enable) |
| { |
| unsigned _id = (unsigned)vreg_id; |
| unsigned _enable = !!enable; |
| |
| return msm_proc_comm(PCOM_VREG_SWITCH, &_id, &_enable); |
| } |
| |
| /* vreg_set_level: (vreg ID, mV) => (return code, <null>) */ |
| static int _vreg_set_level(int vreg_id, int level_mV) |
| { |
| unsigned _id = (unsigned)vreg_id; |
| unsigned _level = (unsigned)level_mV; |
| int rc; |
| |
| rc = msm_proc_comm(PCOM_VREG_SET_LEVEL, &_id, &_level); |
| |
| if (rc) |
| return rc; |
| |
| return _pcom_err_to_linux_errno(_id); |
| } |
| |
| /* vreg_pull_down: (pull down, vreg ID) => (<null>, <null>) */ |
| /* Returns error code from msm_proc_comm. */ |
| static int _vreg_pull_down(int vreg_id, bool pull_down) |
| { |
| unsigned _id = (unsigned)vreg_id; |
| unsigned _enable = !!pull_down; |
| |
| return msm_proc_comm(PCOM_VREG_PULLDOWN, &_enable, &_id); |
| } |
| |
| struct proccomm_regulator_drvdata { |
| struct regulator_desc rdesc; |
| int rise_time; |
| int last_voltage; |
| bool enabled; |
| bool negative; |
| }; |
| |
| static int proccomm_vreg_enable(struct regulator_dev *rdev) |
| { |
| struct proccomm_regulator_drvdata *ddata; |
| int rc; |
| |
| ddata = rdev_get_drvdata(rdev); |
| rc = _vreg_switch(rdev_get_id(rdev), VREG_SWITCH_ENABLE); |
| |
| if (rc) { |
| dev_err(rdev_get_dev(rdev), |
| "could not enable regulator %d (%s): %d\n", |
| rdev_get_id(rdev), ddata->rdesc.name, rc); |
| } else { |
| dev_dbg(rdev_get_dev(rdev), |
| "enabled regulator %d (%s)\n", |
| rdev_get_id(rdev), ddata->rdesc.name); |
| ddata->enabled = 1; |
| } |
| |
| return rc; |
| } |
| |
| static int proccomm_vreg_disable(struct regulator_dev *rdev) |
| { |
| struct proccomm_regulator_drvdata *ddata; |
| int rc; |
| |
| ddata = rdev_get_drvdata(rdev); |
| rc = _vreg_switch(rdev_get_id(rdev), VREG_SWITCH_DISABLE); |
| |
| if (rc) { |
| dev_err(rdev_get_dev(rdev), |
| "could not disable regulator %d (%s): %d\n", |
| rdev_get_id(rdev), ddata->rdesc.name, rc); |
| } else { |
| dev_dbg(rdev_get_dev(rdev), |
| "disabled regulator %d (%s)\n", |
| rdev_get_id(rdev), ddata->rdesc.name); |
| ddata->enabled = 0; |
| } |
| |
| return rc; |
| } |
| |
| static int proccomm_vreg_is_enabled(struct regulator_dev *rdev) |
| { |
| struct proccomm_regulator_drvdata *ddata = rdev_get_drvdata(rdev); |
| |
| return ddata->enabled; |
| } |
| |
| static int proccomm_vreg_rise_time(struct regulator_dev *rdev) |
| { |
| struct proccomm_regulator_drvdata *ddata = rdev_get_drvdata(rdev); |
| |
| return ddata->rise_time; |
| } |
| |
| static int proccomm_vreg_get_voltage(struct regulator_dev *rdev) |
| { |
| |
| struct proccomm_regulator_drvdata *ddata = rdev_get_drvdata(rdev); |
| |
| return MV_TO_UV(ddata->last_voltage); |
| } |
| |
| static int proccomm_vreg_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *sel) |
| { |
| struct proccomm_regulator_drvdata *ddata = rdev_get_drvdata(rdev); |
| int level_mV = UV_TO_MV(min_uV); |
| int rc; |
| |
| rc = _vreg_set_level(rdev_get_id(rdev), |
| ddata->negative ? -level_mV : level_mV); |
| |
| if (rc) { |
| dev_err(rdev_get_dev(rdev), |
| "could not set voltage for regulator %d (%s) " |
| "to %d mV: %d\n", |
| rdev_get_id(rdev), ddata->rdesc.name, level_mV, rc); |
| } else { |
| dev_dbg(rdev_get_dev(rdev), |
| "voltage for regulator %d (%s) set to %d mV\n", |
| rdev_get_id(rdev), ddata->rdesc.name, level_mV); |
| ddata->last_voltage = level_mV; |
| } |
| |
| return rc; |
| } |
| |
| static struct regulator_ops proccomm_regulator_ops = { |
| .enable = proccomm_vreg_enable, |
| .disable = proccomm_vreg_disable, |
| .is_enabled = proccomm_vreg_is_enabled, |
| .get_voltage = proccomm_vreg_get_voltage, |
| .set_voltage = proccomm_vreg_set_voltage, |
| .enable_time = proccomm_vreg_rise_time, |
| }; |
| |
| /* |
| * Create and register a struct regulator_dev based on the information in |
| * a struct proccomm_regulator_info. |
| * Fills in the rdev field in struct proccomm_regulator_info. |
| */ |
| static struct regulator_dev *__devinit create_proccomm_rdev( |
| struct proccomm_regulator_info *info, struct device *parent) |
| { |
| const char *name; |
| struct proccomm_regulator_drvdata *d; |
| struct regulator_dev *rdev; |
| int rc = 0; |
| |
| if (info->id < 0) { |
| dev_err(parent, "invalid regulator id %d\n", info->id); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| name = info->init_data.constraints.name; |
| |
| if (!name) { |
| dev_err(parent, |
| "could not register regulator with id %d: " |
| "no name specified\n", info->id); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| if (info->pulldown > 0) { |
| rc = _vreg_pull_down(info->id, info->pulldown); |
| if (rc) { |
| dev_err(parent, |
| "probing for regulator %d (%s) failed\n", |
| info->id, name); |
| goto out; |
| } |
| } |
| |
| d = kzalloc(sizeof(*d), GFP_KERNEL); |
| |
| if (!d) { |
| dev_err(parent, |
| "could not allocate struct proccomm_regulator_drvdata " |
| "for regulator %d (%s)\n", info->id, name); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| d->rdesc.name = name; |
| d->rdesc.id = info->id; |
| d->rdesc.ops = &proccomm_regulator_ops; |
| d->rdesc.type = REGULATOR_VOLTAGE; |
| d->rdesc.owner = THIS_MODULE; |
| d->rise_time = info->rise_time; |
| d->enabled = 0; |
| d->negative = info->negative; |
| d->rdesc.n_voltages = info->n_voltages; |
| |
| rdev = regulator_register(&d->rdesc, parent, &info->init_data, d, NULL); |
| |
| if (IS_ERR(rdev)) { |
| rc = PTR_ERR(rdev); |
| dev_err(parent, "error registering regulator %d (%s): %d\n", |
| info->id, name, rc); |
| goto clean; |
| } |
| |
| dev_dbg(parent, "registered regulator %d (%s)\n", info->id, name); |
| |
| return rdev; |
| |
| clean: |
| kfree(d); |
| out: |
| return ERR_PTR(rc); |
| } |
| |
| /* |
| * Unregister and destroy a struct regulator_dev created by |
| * create_proccomm_rdev. |
| */ |
| static void destroy_proccomm_rdev(struct regulator_dev *rdev) |
| { |
| struct proccomm_regulator_drvdata *d; |
| |
| if (!rdev) |
| return; |
| |
| d = rdev_get_drvdata(rdev); |
| |
| regulator_unregister(rdev); |
| |
| dev_dbg(rdev_get_dev(rdev)->parent, |
| "unregistered regulator %d (%s)\n", |
| d->rdesc.id, d->rdesc.name); |
| |
| kfree(d); |
| } |
| |
| |
| static int __devinit proccomm_vreg_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct proccomm_regulator_platform_data *pdata = dev->platform_data; |
| struct regulator_dev **rdevs; |
| int rc = 0; |
| size_t i = 0; |
| |
| if (!pdata) { |
| dev_err(dev, "invalid platform data\n"); |
| rc = -EINVAL; |
| goto check_fail; |
| } |
| |
| if (pdata->nregs == 0) { |
| dev_err(dev, "registering an empty regulator list; " |
| "this is probably not what you want\n"); |
| rc = -EINVAL; |
| goto check_fail; |
| } |
| |
| rdevs = kcalloc(pdata->nregs, sizeof(*rdevs), GFP_KERNEL); |
| |
| if (!rdevs) { |
| dev_err(dev, "could not allocate storage for " |
| "struct regulator_dev array\n"); |
| rc = -ENOMEM; |
| goto check_fail; |
| } |
| |
| platform_set_drvdata(pdev, rdevs); |
| |
| dev_dbg(dev, "registering %d proccomm regulators\n", pdata->nregs); |
| |
| for (i = 0; i < pdata->nregs; i++) { |
| rdevs[i] = create_proccomm_rdev(&pdata->regs[i], dev); |
| if (IS_ERR(rdevs[i])) { |
| rc = PTR_ERR(rdevs[i]); |
| goto backout; |
| } |
| } |
| |
| dev_dbg(dev, "%d proccomm regulators registered\n", pdata->nregs); |
| |
| return rc; |
| |
| backout: |
| while (--i >= 0) |
| destroy_proccomm_rdev(rdevs[i]); |
| |
| kfree(rdevs); |
| |
| check_fail: |
| return rc; |
| } |
| |
| static int __devexit proccomm_vreg_remove(struct platform_device *pdev) |
| { |
| struct proccomm_regulator_platform_data *pdata; |
| struct regulator_dev **rdevs; |
| size_t i; |
| |
| pdata = pdev->dev.platform_data; |
| rdevs = platform_get_drvdata(pdev); |
| |
| for (i = 0; i < pdata->nregs; i++) |
| destroy_proccomm_rdev(rdevs[i]); |
| |
| kfree(rdevs); |
| |
| return 0; |
| } |
| |
| static struct platform_driver proccomm_vreg_driver = { |
| .probe = proccomm_vreg_probe, |
| .remove = __devexit_p(proccomm_vreg_remove), |
| .driver = { |
| .name = PROCCOMM_REGULATOR_DEV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init proccomm_vreg_init(void) |
| { |
| return platform_driver_register(&proccomm_vreg_driver); |
| } |
| postcore_initcall(proccomm_vreg_init); |
| |
| static void __exit proccomm_vreg_exit(void) |
| { |
| platform_driver_unregister(&proccomm_vreg_driver); |
| } |
| module_exit(proccomm_vreg_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("ProcComm regulator driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_ALIAS("platform:" PROCCOMM_REGULATOR_DEV_NAME); |