| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/gpio_event.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/hardware/gic.h> |
| #include <mach/board.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/msm_hsusb.h> |
| #include <mach/rpc_hsusb.h> |
| #include <mach/rpc_pmapp.h> |
| #include <mach/usbdiag.h> |
| #include <mach/msm_memtypes.h> |
| #include <mach/msm_serial_hs.h> |
| #include <linux/usb/android.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <mach/vreg.h> |
| #include <mach/pmic.h> |
| #include <mach/socinfo.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <asm/mach/mmc.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/sx150x.h> |
| #include <linux/gpio.h> |
| #include <linux/android_pmem.h> |
| #include <linux/bootmem.h> |
| #include <linux/mfd/marimba.h> |
| #include <mach/vreg.h> |
| #include <linux/power_supply.h> |
| #include <linux/regulator/consumer.h> |
| #include <mach/rpc_pmapp.h> |
| #include <mach/msm_battery.h> |
| #include <linux/smsc911x.h> |
| #include <linux/atmel_maxtouch.h> |
| #include "devices.h" |
| #include "timer.h" |
| #include "board-msm7x27a-regulator.h" |
| #include "devices-msm7x2xa.h" |
| #include "pm.h" |
| #include <mach/rpc_server_handset.h> |
| #include <mach/socinfo.h> |
| #include "pm-boot.h" |
| #include "board-msm7627a.h" |
| |
| #define PMEM_KERNEL_EBI1_SIZE 0x3A000 |
| #define MSM_PMEM_AUDIO_SIZE 0x5B000 |
| |
| #if defined(CONFIG_GPIO_SX150X) |
| enum { |
| SX150X_CORE, |
| }; |
| |
| static struct sx150x_platform_data sx150x_data[] __initdata = { |
| [SX150X_CORE] = { |
| .gpio_base = GPIO_CORE_EXPANDER_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0, |
| .io_pulldn_ena = 0x02, |
| .io_open_drain_ena = 0xfef8, |
| .irq_summary = -1, |
| }, |
| }; |
| #endif |
| |
| |
| static struct platform_device msm_wlan_ar6000_pm_device = { |
| .name = "wlan_ar6000_pm_dev", |
| .id = -1, |
| }; |
| |
| #if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X) |
| static struct i2c_board_info core_exp_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("sx1509q", 0x3e), |
| }, |
| }; |
| |
| static void __init register_i2c_devices(void) |
| { |
| if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf()) |
| sx150x_data[SX150X_CORE].io_open_drain_ena = 0xe0f0; |
| |
| core_exp_i2c_info[0].platform_data = |
| &sx150x_data[SX150X_CORE]; |
| |
| i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID, |
| core_exp_i2c_info, |
| ARRAY_SIZE(core_exp_i2c_info)); |
| } |
| #endif |
| |
| static struct msm_gpio qup_i2c_gpios_io[] = { |
| { GPIO_CFG(60, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_scl" }, |
| { GPIO_CFG(61, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_sda" }, |
| { GPIO_CFG(131, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_scl" }, |
| { GPIO_CFG(132, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_sda" }, |
| }; |
| |
| static struct msm_gpio qup_i2c_gpios_hw[] = { |
| { GPIO_CFG(60, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_scl" }, |
| { GPIO_CFG(61, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_sda" }, |
| { GPIO_CFG(131, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_scl" }, |
| { GPIO_CFG(132, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), |
| "qup_sda" }, |
| }; |
| |
| static void gsbi_qup_i2c_gpio_config(int adap_id, int config_type) |
| { |
| int rc; |
| |
| if (adap_id < 0 || adap_id > 1) |
| return; |
| |
| /* Each adapter gets 2 lines from the table */ |
| if (config_type) |
| rc = msm_gpios_request_enable(&qup_i2c_gpios_hw[adap_id*2], 2); |
| else |
| rc = msm_gpios_request_enable(&qup_i2c_gpios_io[adap_id*2], 2); |
| if (rc < 0) |
| pr_err("QUP GPIO request/enable failed: %d\n", rc); |
| } |
| |
| static struct msm_i2c_platform_data msm_gsbi0_qup_i2c_pdata = { |
| .clk_freq = 100000, |
| .msm_i2c_config_gpio = gsbi_qup_i2c_gpio_config, |
| }; |
| |
| static struct msm_i2c_platform_data msm_gsbi1_qup_i2c_pdata = { |
| .clk_freq = 100000, |
| .msm_i2c_config_gpio = gsbi_qup_i2c_gpio_config, |
| }; |
| |
| static struct msm_i2c_platform_data msm8625_gsbi0_qup_i2c_pdata = { |
| .clk_freq = 100000, |
| }; |
| |
| #ifdef CONFIG_ARCH_MSM7X27A |
| #define MSM_PMEM_MDP_SIZE 0x2300000 |
| #define MSM7x25A_MSM_PMEM_MDP_SIZE 0x1500000 |
| |
| #define MSM_PMEM_ADSP_SIZE 0x1100000 |
| #define MSM7x25A_MSM_PMEM_ADSP_SIZE 0xB91000 |
| |
| #endif |
| |
| static struct android_usb_platform_data android_usb_pdata = { |
| .update_pid_and_serial_num = usb_diag_update_pid_and_serial_num, |
| }; |
| |
| static struct platform_device android_usb_device = { |
| .name = "android_usb", |
| .id = -1, |
| .dev = { |
| .platform_data = &android_usb_pdata, |
| }, |
| }; |
| |
| #ifdef CONFIG_USB_EHCI_MSM_72K |
| static void msm_hsusb_vbus_power(unsigned phy_info, int on) |
| { |
| int rc = 0; |
| unsigned gpio; |
| |
| gpio = GPIO_HOST_VBUS_EN; |
| |
| rc = gpio_request(gpio, "i2c_host_vbus_en"); |
| if (rc < 0) { |
| pr_err("failed to request %d GPIO\n", gpio); |
| return; |
| } |
| gpio_direction_output(gpio, !!on); |
| gpio_set_value_cansleep(gpio, !!on); |
| gpio_free(gpio); |
| } |
| |
| static struct msm_usb_host_platform_data msm_usb_host_pdata = { |
| .phy_info = (USB_PHY_INTEGRATED | USB_PHY_MODEL_45NM), |
| }; |
| |
| static void __init msm7x2x_init_host(void) |
| { |
| msm_add_host(0, &msm_usb_host_pdata); |
| } |
| #endif |
| |
| #ifdef CONFIG_USB_MSM_OTG_72K |
| static int hsusb_rpc_connect(int connect) |
| { |
| if (connect) |
| return msm_hsusb_rpc_connect(); |
| else |
| return msm_hsusb_rpc_close(); |
| } |
| |
| static struct regulator *reg_hsusb; |
| static int msm_hsusb_ldo_init(int init) |
| { |
| int rc = 0; |
| |
| if (init) { |
| reg_hsusb = regulator_get(NULL, "usb"); |
| if (IS_ERR(reg_hsusb)) { |
| rc = PTR_ERR(reg_hsusb); |
| pr_err("%s: could not get regulator: %d\n", |
| __func__, rc); |
| goto out; |
| } |
| |
| rc = regulator_set_voltage(reg_hsusb, 3300000, 3300000); |
| if (rc) { |
| pr_err("%s: could not set voltage: %d\n", |
| __func__, rc); |
| goto reg_free; |
| } |
| |
| return 0; |
| } |
| /* else fall through */ |
| reg_free: |
| regulator_put(reg_hsusb); |
| out: |
| reg_hsusb = NULL; |
| return rc; |
| } |
| |
| static int msm_hsusb_ldo_enable(int enable) |
| { |
| static int ldo_status; |
| |
| if (IS_ERR_OR_NULL(reg_hsusb)) |
| return reg_hsusb ? PTR_ERR(reg_hsusb) : -ENODEV; |
| |
| if (ldo_status == enable) |
| return 0; |
| |
| ldo_status = enable; |
| |
| return enable ? |
| regulator_enable(reg_hsusb) : |
| regulator_disable(reg_hsusb); |
| } |
| |
| #ifndef CONFIG_USB_EHCI_MSM_72K |
| static int msm_hsusb_pmic_notif_init(void (*callback)(int online), int init) |
| { |
| int ret = 0; |
| |
| if (init) |
| ret = msm_pm_app_rpc_init(callback); |
| else |
| msm_pm_app_rpc_deinit(callback); |
| |
| return ret; |
| } |
| #endif |
| |
| static struct msm_otg_platform_data msm_otg_pdata = { |
| #ifndef CONFIG_USB_EHCI_MSM_72K |
| .pmic_vbus_notif_init = msm_hsusb_pmic_notif_init, |
| #else |
| .vbus_power = msm_hsusb_vbus_power, |
| #endif |
| .rpc_connect = hsusb_rpc_connect, |
| .pemp_level = PRE_EMPHASIS_WITH_20_PERCENT, |
| .cdr_autoreset = CDR_AUTO_RESET_DISABLE, |
| .drv_ampl = HS_DRV_AMPLITUDE_DEFAULT, |
| .se1_gating = SE1_GATING_DISABLE, |
| .ldo_init = msm_hsusb_ldo_init, |
| .ldo_enable = msm_hsusb_ldo_enable, |
| .chg_init = hsusb_chg_init, |
| .chg_connected = hsusb_chg_connected, |
| .chg_vbus_draw = hsusb_chg_vbus_draw, |
| }; |
| #endif |
| |
| static struct msm_hsusb_gadget_platform_data msm_gadget_pdata = { |
| .is_phy_status_timer_on = 1, |
| }; |
| |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .start = 0x90000300, |
| .end = 0x900003ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = MSM_GPIO_TO_INT(4), |
| .end = MSM_GPIO_TO_INT(4), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| #ifdef CONFIG_SERIAL_MSM_HS |
| static struct msm_serial_hs_platform_data msm_uart_dm1_pdata = { |
| .inject_rx_on_wakeup = 1, |
| .rx_to_inject = 0xFD, |
| }; |
| #endif |
| static struct msm_pm_platform_data msm7x27a_pm_data[MSM_PM_SLEEP_MODE_NR] = { |
| [MSM_PM_SLEEP_MODE_POWER_COLLAPSE] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 1, |
| .suspend_enabled = 1, |
| .latency = 16000, |
| .residency = 20000, |
| }, |
| [MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 1, |
| .suspend_enabled = 1, |
| .latency = 12000, |
| .residency = 20000, |
| }, |
| [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 0, |
| .suspend_enabled = 1, |
| .latency = 2000, |
| .residency = 0, |
| }, |
| [MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT] = { |
| .idle_supported = 1, |
| .suspend_supported = 1, |
| .idle_enabled = 1, |
| .suspend_enabled = 1, |
| .latency = 2, |
| .residency = 0, |
| }, |
| }; |
| |
| static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = { |
| .mode = MSM_PM_BOOT_CONFIG_RESET_VECTOR_PHYS, |
| .p_addr = 0, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_adsp_pdata = { |
| .name = "pmem_adsp", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 1, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device android_pmem_adsp_device = { |
| .name = "android_pmem", |
| .id = 1, |
| .dev = { .platform_data = &android_pmem_adsp_pdata }, |
| }; |
| |
| static unsigned pmem_mdp_size = MSM_PMEM_MDP_SIZE; |
| static int __init pmem_mdp_size_setup(char *p) |
| { |
| pmem_mdp_size = memparse(p, NULL); |
| return 0; |
| } |
| |
| early_param("pmem_mdp_size", pmem_mdp_size_setup); |
| |
| static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE; |
| static int __init pmem_adsp_size_setup(char *p) |
| { |
| pmem_adsp_size = memparse(p, NULL); |
| return 0; |
| } |
| |
| early_param("pmem_adsp_size", pmem_adsp_size_setup); |
| |
| #define SND(desc, num) { .name = #desc, .id = num } |
| static struct snd_endpoint snd_endpoints_list[] = { |
| SND(HANDSET, 0), |
| SND(MONO_HEADSET, 2), |
| SND(HEADSET, 3), |
| SND(SPEAKER, 6), |
| SND(TTY_HEADSET, 8), |
| SND(TTY_VCO, 9), |
| SND(TTY_HCO, 10), |
| SND(BT, 12), |
| SND(IN_S_SADC_OUT_HANDSET, 16), |
| SND(IN_S_SADC_OUT_SPEAKER_PHONE, 25), |
| SND(FM_DIGITAL_STEREO_HEADSET, 26), |
| SND(FM_DIGITAL_SPEAKER_PHONE, 27), |
| SND(FM_DIGITAL_BT_A2DP_HEADSET, 28), |
| SND(STEREO_HEADSET_AND_SPEAKER, 31), |
| SND(CURRENT, 0x7FFFFFFE), |
| SND(FM_ANALOG_STEREO_HEADSET, 35), |
| SND(FM_ANALOG_STEREO_HEADSET_CODEC, 36), |
| }; |
| #undef SND |
| |
| static struct msm_snd_endpoints msm_device_snd_endpoints = { |
| .endpoints = snd_endpoints_list, |
| .num = sizeof(snd_endpoints_list) / sizeof(struct snd_endpoint) |
| }; |
| |
| static struct platform_device msm_device_snd = { |
| .name = "msm_snd", |
| .id = -1, |
| .dev = { |
| .platform_data = &msm_device_snd_endpoints |
| }, |
| }; |
| |
| #define DEC0_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \ |
| (1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \ |
| (1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \ |
| (1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \ |
| (1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \ |
| (1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP)) |
| #define DEC1_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \ |
| (1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \ |
| (1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \ |
| (1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \ |
| (1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \ |
| (1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP)) |
| #define DEC2_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \ |
| (1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \ |
| (1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \ |
| (1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \ |
| (1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \ |
| (1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP)) |
| #define DEC3_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \ |
| (1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \ |
| (1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \ |
| (1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \ |
| (1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \ |
| (1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP)) |
| #define DEC4_FORMAT (1<<MSM_ADSP_CODEC_MIDI) |
| |
| static unsigned int dec_concurrency_table[] = { |
| /* Audio LP */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DMA)), 0, |
| 0, 0, 0, |
| |
| /* Concurrency 1 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC3_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC4_FORMAT), |
| |
| /* Concurrency 2 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC3_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC4_FORMAT), |
| |
| /* Concurrency 3 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC4_FORMAT), |
| |
| /* Concurrency 4 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC4_FORMAT), |
| |
| /* Concurrency 5 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC1_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC4_FORMAT), |
| |
| /* Concurrency 6 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| 0, 0, 0, 0, |
| |
| /* Concurrency 7 */ |
| (DEC0_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC1_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)), |
| (DEC4_FORMAT), |
| }; |
| |
| #define DEC_INFO(name, queueid, decid, nr_codec) { .module_name = name, \ |
| .module_queueid = queueid, .module_decid = decid, \ |
| .nr_codec_support = nr_codec} |
| |
| static struct msm_adspdec_info dec_info_list[] = { |
| DEC_INFO("AUDPLAY0TASK", 13, 0, 11), /* AudPlay0BitStreamCtrlQueue */ |
| DEC_INFO("AUDPLAY1TASK", 14, 1, 11), /* AudPlay1BitStreamCtrlQueue */ |
| DEC_INFO("AUDPLAY2TASK", 15, 2, 11), /* AudPlay2BitStreamCtrlQueue */ |
| DEC_INFO("AUDPLAY3TASK", 16, 3, 11), /* AudPlay3BitStreamCtrlQueue */ |
| DEC_INFO("AUDPLAY4TASK", 17, 4, 1), /* AudPlay4BitStreamCtrlQueue */ |
| }; |
| |
| static struct msm_adspdec_database msm_device_adspdec_database = { |
| .num_dec = ARRAY_SIZE(dec_info_list), |
| .num_concurrency_support = (ARRAY_SIZE(dec_concurrency_table) / \ |
| ARRAY_SIZE(dec_info_list)), |
| .dec_concurrency_table = dec_concurrency_table, |
| .dec_info_list = dec_info_list, |
| }; |
| |
| static struct platform_device msm_device_adspdec = { |
| .name = "msm_adspdec", |
| .id = -1, |
| .dev = { |
| .platform_data = &msm_device_adspdec_database |
| }, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_audio_pdata = { |
| .name = "pmem_audio", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device android_pmem_audio_device = { |
| .name = "android_pmem", |
| .id = 2, |
| .dev = { .platform_data = &android_pmem_audio_pdata }, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_pdata = { |
| .name = "pmem", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 1, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| static struct platform_device android_pmem_device = { |
| .name = "android_pmem", |
| .id = 0, |
| .dev = { .platform_data = &android_pmem_pdata }, |
| }; |
| |
| static u32 msm_calculate_batt_capacity(u32 current_voltage); |
| |
| static struct msm_psy_batt_pdata msm_psy_batt_data = { |
| .voltage_min_design = 2800, |
| .voltage_max_design = 4300, |
| .avail_chg_sources = AC_CHG | USB_CHG , |
| .batt_technology = POWER_SUPPLY_TECHNOLOGY_LION, |
| .calculate_capacity = &msm_calculate_batt_capacity, |
| }; |
| |
| static u32 msm_calculate_batt_capacity(u32 current_voltage) |
| { |
| u32 low_voltage = msm_psy_batt_data.voltage_min_design; |
| u32 high_voltage = msm_psy_batt_data.voltage_max_design; |
| |
| return (current_voltage - low_voltage) * 100 |
| / (high_voltage - low_voltage); |
| } |
| |
| static struct platform_device msm_batt_device = { |
| .name = "msm-battery", |
| .id = -1, |
| .dev.platform_data = &msm_psy_batt_data, |
| }; |
| |
| static struct smsc911x_platform_config smsc911x_config = { |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, |
| .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| .flags = SMSC911X_USE_16BIT, |
| }; |
| |
| static struct resource smsc911x_resources[] = { |
| [0] = { |
| .start = 0x90000000, |
| .end = 0x90007fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = MSM_GPIO_TO_INT(48), |
| .end = MSM_GPIO_TO_INT(48), |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, |
| }, |
| }; |
| |
| static struct platform_device smsc911x_device = { |
| .name = "smsc911x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smsc911x_resources), |
| .resource = smsc911x_resources, |
| .dev = { |
| .platform_data = &smsc911x_config, |
| }, |
| }; |
| |
| static struct msm_gpio smsc911x_gpios[] = { |
| { GPIO_CFG(48, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_6MA), |
| "smsc911x_irq" }, |
| { GPIO_CFG(49, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_6MA), |
| "eth_fifo_sel" }, |
| }; |
| |
| #define ETH_FIFO_SEL_GPIO 49 |
| static void msm7x27a_cfg_smsc911x(void) |
| { |
| int res; |
| |
| res = msm_gpios_request_enable(smsc911x_gpios, |
| ARRAY_SIZE(smsc911x_gpios)); |
| if (res) { |
| pr_err("%s: unable to enable gpios for SMSC911x\n", __func__); |
| return; |
| } |
| |
| /* ETH_FIFO_SEL */ |
| res = gpio_direction_output(ETH_FIFO_SEL_GPIO, 0); |
| if (res) { |
| pr_err("%s: unable to get direction for gpio %d\n", __func__, |
| ETH_FIFO_SEL_GPIO); |
| msm_gpios_disable_free(smsc911x_gpios, |
| ARRAY_SIZE(smsc911x_gpios)); |
| return; |
| } |
| gpio_set_value(ETH_FIFO_SEL_GPIO, 0); |
| } |
| |
| #if defined(CONFIG_SERIAL_MSM_HSL_CONSOLE) \ |
| && defined(CONFIG_MSM_SHARED_GPIO_FOR_UART2DM) |
| static struct msm_gpio uart2dm_gpios[] = { |
| {GPIO_CFG(19, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), |
| "uart2dm_rfr_n" }, |
| {GPIO_CFG(20, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), |
| "uart2dm_cts_n" }, |
| {GPIO_CFG(21, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), |
| "uart2dm_rx" }, |
| {GPIO_CFG(108, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), |
| "uart2dm_tx" }, |
| }; |
| |
| static void msm7x27a_cfg_uart2dm_serial(void) |
| { |
| int ret; |
| ret = msm_gpios_request_enable(uart2dm_gpios, |
| ARRAY_SIZE(uart2dm_gpios)); |
| if (ret) |
| pr_err("%s: unable to enable gpios for uart2dm\n", __func__); |
| } |
| #else |
| static void msm7x27a_cfg_uart2dm_serial(void) { } |
| #endif |
| |
| static struct platform_device *rumi_sim_devices[] __initdata = { |
| &msm_device_dmov, |
| &msm_device_smd, |
| &smc91x_device, |
| &msm_device_uart1, |
| &msm_device_nand, |
| &msm_device_uart_dm1, |
| &msm_gsbi0_qup_i2c_device, |
| &msm_gsbi1_qup_i2c_device, |
| }; |
| |
| static struct platform_device *msm8625_rumi3_devices[] __initdata = { |
| &msm8625_device_dmov, |
| &msm8625_device_uart1, |
| &msm8625_device_qup_i2c_gsbi0, |
| }; |
| |
| static struct platform_device *surf_ffa_devices[] __initdata = { |
| &msm_device_dmov, |
| &msm_device_smd, |
| &msm_device_uart1, |
| &msm_device_uart_dm1, |
| &msm_device_uart_dm2, |
| &msm_device_nand, |
| &msm_gsbi0_qup_i2c_device, |
| &msm_gsbi1_qup_i2c_device, |
| &msm_device_otg, |
| &msm_device_gadget_peripheral, |
| &android_usb_device, |
| &android_pmem_device, |
| &android_pmem_adsp_device, |
| &android_pmem_audio_device, |
| &msm_device_snd, |
| &msm_device_adspdec, |
| &msm_batt_device, |
| &smsc911x_device, |
| &msm_kgsl_3d0, |
| #ifdef CONFIG_BT |
| &msm_bt_power_device, |
| #endif |
| &asoc_msm_pcm, |
| &asoc_msm_dai0, |
| &asoc_msm_dai1, |
| }; |
| |
| static unsigned pmem_kernel_ebi1_size = PMEM_KERNEL_EBI1_SIZE; |
| static int __init pmem_kernel_ebi1_size_setup(char *p) |
| { |
| pmem_kernel_ebi1_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_kernel_ebi1_size", pmem_kernel_ebi1_size_setup); |
| |
| static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE; |
| static int __init pmem_audio_size_setup(char *p) |
| { |
| pmem_audio_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_audio_size", pmem_audio_size_setup); |
| |
| static struct memtype_reserve msm7x27a_reserve_table[] __initdata = { |
| [MEMTYPE_SMI] = { |
| }, |
| [MEMTYPE_EBI0] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| [MEMTYPE_EBI1] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| }; |
| |
| static void __init size_pmem_devices(void) |
| { |
| |
| if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) { |
| pmem_mdp_size = MSM7x25A_MSM_PMEM_MDP_SIZE; |
| pmem_adsp_size = MSM7x25A_MSM_PMEM_ADSP_SIZE; |
| } else { |
| pmem_mdp_size = MSM_PMEM_MDP_SIZE; |
| pmem_adsp_size = MSM_PMEM_ADSP_SIZE; |
| } |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| android_pmem_adsp_pdata.size = pmem_adsp_size; |
| android_pmem_pdata.size = pmem_mdp_size; |
| android_pmem_audio_pdata.size = pmem_audio_size; |
| #endif |
| } |
| |
| static void __init reserve_memory_for(struct android_pmem_platform_data *p) |
| { |
| msm7x27a_reserve_table[p->memory_type].size += p->size; |
| } |
| |
| static void __init reserve_pmem_memory(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| reserve_memory_for(&android_pmem_adsp_pdata); |
| reserve_memory_for(&android_pmem_pdata); |
| reserve_memory_for(&android_pmem_audio_pdata); |
| msm7x27a_reserve_table[MEMTYPE_EBI1].size += pmem_kernel_ebi1_size; |
| #endif |
| } |
| |
| static void __init msm7x27a_calculate_reserve_sizes(void) |
| { |
| size_pmem_devices(); |
| reserve_pmem_memory(); |
| } |
| |
| static int msm7x27a_paddr_to_memtype(unsigned int paddr) |
| { |
| return MEMTYPE_EBI1; |
| } |
| |
| static struct reserve_info msm7x27a_reserve_info __initdata = { |
| .memtype_reserve_table = msm7x27a_reserve_table, |
| .calculate_reserve_sizes = msm7x27a_calculate_reserve_sizes, |
| .paddr_to_memtype = msm7x27a_paddr_to_memtype, |
| }; |
| |
| static void __init msm7x27a_reserve(void) |
| { |
| reserve_info = &msm7x27a_reserve_info; |
| msm_reserve(); |
| } |
| |
| static void __init msm_device_i2c_init(void) |
| { |
| if (machine_is_msm8625_rumi3()) { |
| msm8625_device_qup_i2c_gsbi0.dev.platform_data = |
| &msm8625_gsbi0_qup_i2c_pdata; |
| return; |
| } |
| |
| msm_gsbi0_qup_i2c_device.dev.platform_data = &msm_gsbi0_qup_i2c_pdata; |
| msm_gsbi1_qup_i2c_device.dev.platform_data = &msm_gsbi1_qup_i2c_pdata; |
| } |
| |
| #define MSM_EBI2_PHYS 0xa0d00000 |
| #define MSM_EBI2_XMEM_CS2_CFG1 0xa0d10030 |
| |
| static void __init msm7x27a_init_ebi2(void) |
| { |
| uint32_t ebi2_cfg; |
| void __iomem *ebi2_cfg_ptr; |
| |
| ebi2_cfg_ptr = ioremap_nocache(MSM_EBI2_PHYS, sizeof(uint32_t)); |
| if (!ebi2_cfg_ptr) |
| return; |
| |
| ebi2_cfg = readl(ebi2_cfg_ptr); |
| if (machine_is_msm7x27a_rumi3() || machine_is_msm7x27a_surf() || |
| machine_is_msm7625a_surf()) |
| ebi2_cfg |= (1 << 4); /* CS2 */ |
| |
| writel(ebi2_cfg, ebi2_cfg_ptr); |
| iounmap(ebi2_cfg_ptr); |
| |
| /* Enable A/D MUX[bit 31] from EBI2_XMEM_CS2_CFG1 */ |
| ebi2_cfg_ptr = ioremap_nocache(MSM_EBI2_XMEM_CS2_CFG1, |
| sizeof(uint32_t)); |
| if (!ebi2_cfg_ptr) |
| return; |
| |
| ebi2_cfg = readl(ebi2_cfg_ptr); |
| if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf()) |
| ebi2_cfg |= (1 << 31); |
| |
| writel(ebi2_cfg, ebi2_cfg_ptr); |
| iounmap(ebi2_cfg_ptr); |
| } |
| |
| #define ATMEL_TS_I2C_NAME "maXTouch" |
| |
| static struct regulator_bulk_data regs_atmel[] = { |
| { .supply = "ldo2", .min_uV = 2850000, .max_uV = 2850000 }, |
| { .supply = "smps3", .min_uV = 1800000, .max_uV = 1800000 }, |
| }; |
| |
| #define ATMEL_TS_GPIO_IRQ 82 |
| |
| static int atmel_ts_power_on(bool on) |
| { |
| int rc = on ? |
| regulator_bulk_enable(ARRAY_SIZE(regs_atmel), regs_atmel) : |
| regulator_bulk_disable(ARRAY_SIZE(regs_atmel), regs_atmel); |
| |
| if (rc) |
| pr_err("%s: could not %sable regulators: %d\n", |
| __func__, on ? "en" : "dis", rc); |
| else |
| msleep(50); |
| |
| return rc; |
| } |
| |
| static int atmel_ts_platform_init(struct i2c_client *client) |
| { |
| int rc; |
| struct device *dev = &client->dev; |
| |
| rc = regulator_bulk_get(dev, ARRAY_SIZE(regs_atmel), regs_atmel); |
| if (rc) { |
| dev_err(dev, "%s: could not get regulators: %d\n", |
| __func__, rc); |
| goto out; |
| } |
| |
| rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_atmel), regs_atmel); |
| if (rc) { |
| dev_err(dev, "%s: could not set voltages: %d\n", |
| __func__, rc); |
| goto reg_free; |
| } |
| |
| rc = gpio_tlmm_config(GPIO_CFG(ATMEL_TS_GPIO_IRQ, 0, |
| GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, |
| GPIO_CFG_8MA), GPIO_CFG_ENABLE); |
| if (rc) { |
| dev_err(dev, "%s: gpio_tlmm_config for %d failed\n", |
| __func__, ATMEL_TS_GPIO_IRQ); |
| goto reg_free; |
| } |
| |
| /* configure touchscreen interrupt gpio */ |
| rc = gpio_request(ATMEL_TS_GPIO_IRQ, "atmel_maxtouch_gpio"); |
| if (rc) { |
| dev_err(dev, "%s: unable to request gpio %d\n", |
| __func__, ATMEL_TS_GPIO_IRQ); |
| goto ts_gpio_tlmm_unconfig; |
| } |
| |
| rc = gpio_direction_input(ATMEL_TS_GPIO_IRQ); |
| if (rc < 0) { |
| dev_err(dev, "%s: unable to set the direction of gpio %d\n", |
| __func__, ATMEL_TS_GPIO_IRQ); |
| goto free_ts_gpio; |
| } |
| return 0; |
| |
| free_ts_gpio: |
| gpio_free(ATMEL_TS_GPIO_IRQ); |
| ts_gpio_tlmm_unconfig: |
| gpio_tlmm_config(GPIO_CFG(ATMEL_TS_GPIO_IRQ, 0, |
| GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, |
| GPIO_CFG_2MA), GPIO_CFG_DISABLE); |
| reg_free: |
| regulator_bulk_free(ARRAY_SIZE(regs_atmel), regs_atmel); |
| out: |
| return rc; |
| } |
| |
| static int atmel_ts_platform_exit(struct i2c_client *client) |
| { |
| gpio_free(ATMEL_TS_GPIO_IRQ); |
| gpio_tlmm_config(GPIO_CFG(ATMEL_TS_GPIO_IRQ, 0, |
| GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, |
| GPIO_CFG_2MA), GPIO_CFG_DISABLE); |
| regulator_bulk_free(ARRAY_SIZE(regs_atmel), regs_atmel); |
| return 0; |
| } |
| |
| static u8 atmel_ts_read_chg(void) |
| { |
| return gpio_get_value(ATMEL_TS_GPIO_IRQ); |
| } |
| |
| static u8 atmel_ts_valid_interrupt(void) |
| { |
| return !atmel_ts_read_chg(); |
| } |
| |
| #define ATMEL_X_OFFSET 13 |
| #define ATMEL_Y_OFFSET 0 |
| |
| static struct maxtouch_platform_data atmel_ts_pdata = { |
| .numtouch = 4, |
| .init_platform_hw = atmel_ts_platform_init, |
| .exit_platform_hw = atmel_ts_platform_exit, |
| .power_on = atmel_ts_power_on, |
| .display_res_x = 480, |
| .display_res_y = 864, |
| .min_x = ATMEL_X_OFFSET, |
| .max_x = (505 - ATMEL_X_OFFSET), |
| .min_y = ATMEL_Y_OFFSET, |
| .max_y = (863 - ATMEL_Y_OFFSET), |
| .valid_interrupt = atmel_ts_valid_interrupt, |
| .read_chg = atmel_ts_read_chg, |
| }; |
| |
| static struct i2c_board_info atmel_ts_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO(ATMEL_TS_I2C_NAME, 0x4a), |
| .platform_data = &atmel_ts_pdata, |
| .irq = MSM_GPIO_TO_INT(ATMEL_TS_GPIO_IRQ), |
| }, |
| }; |
| |
| #define KP_INDEX(row, col) ((row)*ARRAY_SIZE(kp_col_gpios) + (col)) |
| |
| static unsigned int kp_row_gpios[] = {31, 32, 33, 34, 35}; |
| static unsigned int kp_col_gpios[] = {36, 37, 38, 39, 40}; |
| |
| static const unsigned short keymap[ARRAY_SIZE(kp_col_gpios) * |
| ARRAY_SIZE(kp_row_gpios)] = { |
| [KP_INDEX(0, 0)] = KEY_7, |
| [KP_INDEX(0, 1)] = KEY_DOWN, |
| [KP_INDEX(0, 2)] = KEY_UP, |
| [KP_INDEX(0, 3)] = KEY_RIGHT, |
| [KP_INDEX(0, 4)] = KEY_ENTER, |
| |
| [KP_INDEX(1, 0)] = KEY_LEFT, |
| [KP_INDEX(1, 1)] = KEY_SEND, |
| [KP_INDEX(1, 2)] = KEY_1, |
| [KP_INDEX(1, 3)] = KEY_4, |
| [KP_INDEX(1, 4)] = KEY_CLEAR, |
| |
| [KP_INDEX(2, 0)] = KEY_6, |
| [KP_INDEX(2, 1)] = KEY_5, |
| [KP_INDEX(2, 2)] = KEY_8, |
| [KP_INDEX(2, 3)] = KEY_3, |
| [KP_INDEX(2, 4)] = KEY_NUMERIC_STAR, |
| |
| [KP_INDEX(3, 0)] = KEY_9, |
| [KP_INDEX(3, 1)] = KEY_NUMERIC_POUND, |
| [KP_INDEX(3, 2)] = KEY_0, |
| [KP_INDEX(3, 3)] = KEY_2, |
| [KP_INDEX(3, 4)] = KEY_SLEEP, |
| |
| [KP_INDEX(4, 0)] = KEY_BACK, |
| [KP_INDEX(4, 1)] = KEY_HOME, |
| [KP_INDEX(4, 2)] = KEY_MENU, |
| [KP_INDEX(4, 3)] = KEY_VOLUMEUP, |
| [KP_INDEX(4, 4)] = KEY_VOLUMEDOWN, |
| }; |
| |
| /* SURF keypad platform device information */ |
| static struct gpio_event_matrix_info kp_matrix_info = { |
| .info.func = gpio_event_matrix_func, |
| .keymap = keymap, |
| .output_gpios = kp_row_gpios, |
| .input_gpios = kp_col_gpios, |
| .noutputs = ARRAY_SIZE(kp_row_gpios), |
| .ninputs = ARRAY_SIZE(kp_col_gpios), |
| .settle_time.tv_nsec = 40 * NSEC_PER_USEC, |
| .poll_time.tv_nsec = 20 * NSEC_PER_MSEC, |
| .flags = GPIOKPF_LEVEL_TRIGGERED_IRQ | GPIOKPF_DRIVE_INACTIVE | |
| GPIOKPF_PRINT_UNMAPPED_KEYS, |
| }; |
| |
| static struct gpio_event_info *kp_info[] = { |
| &kp_matrix_info.info |
| }; |
| |
| static struct gpio_event_platform_data kp_pdata = { |
| .name = "7x27a_kp", |
| .info = kp_info, |
| .info_count = ARRAY_SIZE(kp_info) |
| }; |
| |
| static struct platform_device kp_pdev = { |
| .name = GPIO_EVENT_DEV_NAME, |
| .id = -1, |
| .dev = { |
| .platform_data = &kp_pdata, |
| }, |
| }; |
| |
| static struct msm_handset_platform_data hs_platform_data = { |
| .hs_name = "7k_handset", |
| .pwr_key_delay_ms = 500, /* 0 will disable end key */ |
| }; |
| |
| static struct platform_device hs_pdev = { |
| .name = "msm-handset", |
| .id = -1, |
| .dev = { |
| .platform_data = &hs_platform_data, |
| }, |
| }; |
| |
| static struct platform_device msm_proccomm_regulator_dev = { |
| .name = PROCCOMM_REGULATOR_DEV_NAME, |
| .id = -1, |
| .dev = { |
| .platform_data = &msm7x27a_proccomm_regulator_data |
| } |
| }; |
| |
| static void __init msm7627a_rumi3_init(void) |
| { |
| msm7x27a_init_ebi2(); |
| platform_add_devices(rumi_sim_devices, |
| ARRAY_SIZE(rumi_sim_devices)); |
| } |
| |
| static void __init msm8625_rumi3_init(void) |
| { |
| msm7x2x_misc_init(); |
| msm_device_i2c_init(); |
| platform_add_devices(msm8625_rumi3_devices, |
| ARRAY_SIZE(msm8625_rumi3_devices)); |
| } |
| |
| #define LED_GPIO_PDM 96 |
| #define UART1DM_RX_GPIO 45 |
| |
| #if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE) |
| static int __init msm7x27a_init_ar6000pm(void) |
| { |
| msm_wlan_ar6000_pm_device.dev.platform_data = &ar600x_wlan_power; |
| return platform_device_register(&msm_wlan_ar6000_pm_device); |
| } |
| #else |
| static int __init msm7x27a_init_ar6000pm(void) { return 0; } |
| #endif |
| |
| static void __init msm7x27a_init_regulators(void) |
| { |
| int rc = platform_device_register(&msm_proccomm_regulator_dev); |
| if (rc) |
| pr_err("%s: could not register regulator device: %d\n", |
| __func__, rc); |
| } |
| |
| static void __init msm7x2x_init(void) |
| { |
| msm7x2x_misc_init(); |
| |
| /* Initialize regulators first so that other devices can use them */ |
| msm7x27a_init_regulators(); |
| |
| /* Common functions for SURF/FFA/RUMI3 */ |
| msm_device_i2c_init(); |
| msm7x27a_init_ebi2(); |
| msm7x27a_cfg_uart2dm_serial(); |
| #ifdef CONFIG_SERIAL_MSM_HS |
| msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO); |
| msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata; |
| #endif |
| |
| #ifdef CONFIG_USB_MSM_OTG_72K |
| msm_otg_pdata.swfi_latency = |
| msm7x27a_pm_data |
| [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency; |
| msm_device_otg.dev.platform_data = &msm_otg_pdata; |
| #endif |
| msm_device_gadget_peripheral.dev.platform_data = |
| &msm_gadget_pdata; |
| msm7x27a_cfg_smsc911x(); |
| platform_add_devices(msm_footswitch_devices, |
| msm_num_footswitch_devices); |
| platform_add_devices(surf_ffa_devices, |
| ARRAY_SIZE(surf_ffa_devices)); |
| /* Ensure ar6000pm device is registered before MMC/SDC */ |
| msm7x27a_init_ar6000pm(); |
| #ifdef CONFIG_MMC_MSM |
| msm7627a_init_mmc(); |
| #endif |
| msm_fb_add_devices(); |
| #ifdef CONFIG_USB_EHCI_MSM_72K |
| msm7x2x_init_host(); |
| #endif |
| |
| msm_pm_set_platform_data(msm7x27a_pm_data, |
| ARRAY_SIZE(msm7x27a_pm_data)); |
| BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata)); |
| |
| #if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X) |
| register_i2c_devices(); |
| #endif |
| #if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE) |
| msm7627a_bt_power_init(); |
| #endif |
| if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) { |
| atmel_ts_pdata.min_x = 0; |
| atmel_ts_pdata.max_x = 480; |
| atmel_ts_pdata.min_y = 0; |
| atmel_ts_pdata.max_y = 320; |
| } |
| |
| i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID, |
| atmel_ts_i2c_info, |
| ARRAY_SIZE(atmel_ts_i2c_info)); |
| |
| #if defined(CONFIG_MSM_CAMERA) |
| msm7627a_camera_init(); |
| #endif |
| platform_device_register(&kp_pdev); |
| platform_device_register(&hs_pdev); |
| |
| /* configure it as a pdm function*/ |
| if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3, |
| GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, |
| GPIO_CFG_8MA), GPIO_CFG_ENABLE)) |
| pr_err("%s: gpio_tlmm_config for %d failed\n", |
| __func__, LED_GPIO_PDM); |
| else |
| platform_device_register(&led_pdev); |
| |
| #ifdef CONFIG_MSM_RPC_VIBRATOR |
| if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()) |
| msm_init_pmic_vibrator(); |
| #endif |
| /*7x25a kgsl initializations*/ |
| msm7x25a_kgsl_3d0_init(); |
| } |
| |
| static void __init msm7x2x_init_early(void) |
| { |
| msm_msm7627a_allocate_memory_regions(); |
| } |
| |
| MACHINE_START(MSM7X27A_RUMI3, "QCT MSM7x27a RUMI3") |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = msm_common_io_init, |
| .reserve = msm7x27a_reserve, |
| .init_irq = msm_init_irq, |
| .init_machine = msm7627a_rumi3_init, |
| .timer = &msm_timer, |
| .init_early = msm7x2x_init_early, |
| .handle_irq = vic_handle_irq, |
| MACHINE_END |
| MACHINE_START(MSM7X27A_SURF, "QCT MSM7x27a SURF") |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = msm_common_io_init, |
| .reserve = msm7x27a_reserve, |
| .init_irq = msm_init_irq, |
| .init_machine = msm7x2x_init, |
| .timer = &msm_timer, |
| .init_early = msm7x2x_init_early, |
| .handle_irq = vic_handle_irq, |
| MACHINE_END |
| MACHINE_START(MSM7X27A_FFA, "QCT MSM7x27a FFA") |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = msm_common_io_init, |
| .reserve = msm7x27a_reserve, |
| .init_irq = msm_init_irq, |
| .init_machine = msm7x2x_init, |
| .timer = &msm_timer, |
| .init_early = msm7x2x_init_early, |
| .handle_irq = vic_handle_irq, |
| MACHINE_END |
| MACHINE_START(MSM7625A_SURF, "QCT MSM7625a SURF") |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = msm_common_io_init, |
| .reserve = msm7x27a_reserve, |
| .init_irq = msm_init_irq, |
| .init_machine = msm7x2x_init, |
| .timer = &msm_timer, |
| .init_early = msm7x2x_init_early, |
| .handle_irq = vic_handle_irq, |
| MACHINE_END |
| MACHINE_START(MSM7625A_FFA, "QCT MSM7625a FFA") |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = msm_common_io_init, |
| .reserve = msm7x27a_reserve, |
| .init_irq = msm_init_irq, |
| .init_machine = msm7x2x_init, |
| .timer = &msm_timer, |
| .init_early = msm7x2x_init_early, |
| .handle_irq = vic_handle_irq, |
| MACHINE_END |
| MACHINE_START(MSM8625_RUMI3, "QCT MSM8625 RUMI3") |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = msm8625_map_io, |
| .init_irq = msm8625_init_irq, |
| .init_machine = msm8625_rumi3_init, |
| .timer = &msm_timer, |
| .handle_irq = gic_handle_irq, |
| MACHINE_END |