| /* |
| * eepc-laptop.c - Asus Eee PC extras |
| * |
| * Based on asus_acpi.c as patched for the Eee PC by Asus: |
| * ftp://ftp.asus.com/pub/ASUS/EeePC/701/ASUS_ACPI_071126.rar |
| * Based on eee.c from eeepc-linux |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/backlight.h> |
| #include <linux/fb.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <acpi/acpi_drivers.h> |
| #include <acpi/acpi_bus.h> |
| #include <linux/uaccess.h> |
| #include <linux/input.h> |
| #include <linux/rfkill.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| |
| #define EEEPC_LAPTOP_VERSION "0.1" |
| |
| #define EEEPC_HOTK_NAME "Eee PC Hotkey Driver" |
| #define EEEPC_HOTK_FILE "eeepc" |
| #define EEEPC_HOTK_CLASS "hotkey" |
| #define EEEPC_HOTK_DEVICE_NAME "Hotkey" |
| #define EEEPC_HOTK_HID "ASUS010" |
| |
| |
| /* |
| * Definitions for Asus EeePC |
| */ |
| #define NOTIFY_WLAN_ON 0x10 |
| #define NOTIFY_BRN_MIN 0x20 |
| #define NOTIFY_BRN_MAX 0x2f |
| |
| enum { |
| DISABLE_ASL_WLAN = 0x0001, |
| DISABLE_ASL_BLUETOOTH = 0x0002, |
| DISABLE_ASL_IRDA = 0x0004, |
| DISABLE_ASL_CAMERA = 0x0008, |
| DISABLE_ASL_TV = 0x0010, |
| DISABLE_ASL_GPS = 0x0020, |
| DISABLE_ASL_DISPLAYSWITCH = 0x0040, |
| DISABLE_ASL_MODEM = 0x0080, |
| DISABLE_ASL_CARDREADER = 0x0100, |
| DISABLE_ASL_3G = 0x0200, |
| DISABLE_ASL_WIMAX = 0x0400, |
| DISABLE_ASL_HWCF = 0x0800 |
| }; |
| |
| enum { |
| CM_ASL_WLAN = 0, |
| CM_ASL_BLUETOOTH, |
| CM_ASL_IRDA, |
| CM_ASL_1394, |
| CM_ASL_CAMERA, |
| CM_ASL_TV, |
| CM_ASL_GPS, |
| CM_ASL_DVDROM, |
| CM_ASL_DISPLAYSWITCH, |
| CM_ASL_PANELBRIGHT, |
| CM_ASL_BIOSFLASH, |
| CM_ASL_ACPIFLASH, |
| CM_ASL_CPUFV, |
| CM_ASL_CPUTEMPERATURE, |
| CM_ASL_FANCPU, |
| CM_ASL_FANCHASSIS, |
| CM_ASL_USBPORT1, |
| CM_ASL_USBPORT2, |
| CM_ASL_USBPORT3, |
| CM_ASL_MODEM, |
| CM_ASL_CARDREADER, |
| CM_ASL_3G, |
| CM_ASL_WIMAX, |
| CM_ASL_HWCF, |
| CM_ASL_LID, |
| CM_ASL_TYPE, |
| CM_ASL_PANELPOWER, /*P901*/ |
| CM_ASL_TPD |
| }; |
| |
| static const char *cm_getv[] = { |
| "WLDG", "BTHG", NULL, NULL, |
| "CAMG", NULL, NULL, NULL, |
| NULL, "PBLG", NULL, NULL, |
| "CFVG", NULL, NULL, NULL, |
| "USBG", NULL, NULL, "MODG", |
| "CRDG", "M3GG", "WIMG", "HWCF", |
| "LIDG", "TYPE", "PBPG", "TPDG" |
| }; |
| |
| static const char *cm_setv[] = { |
| "WLDS", "BTHS", NULL, NULL, |
| "CAMS", NULL, NULL, NULL, |
| "SDSP", "PBLS", "HDPS", NULL, |
| "CFVS", NULL, NULL, NULL, |
| "USBG", NULL, NULL, "MODS", |
| "CRDS", "M3GS", "WIMS", NULL, |
| NULL, NULL, "PBPS", "TPDS" |
| }; |
| |
| #define EEEPC_EC "\\_SB.PCI0.SBRG.EC0." |
| |
| #define EEEPC_EC_FAN_PWM EEEPC_EC "SC02" /* Fan PWM duty cycle (%) */ |
| #define EEEPC_EC_SC02 0x63 |
| #define EEEPC_EC_FAN_HRPM EEEPC_EC "SC05" /* High byte, fan speed (RPM) */ |
| #define EEEPC_EC_FAN_LRPM EEEPC_EC "SC06" /* Low byte, fan speed (RPM) */ |
| #define EEEPC_EC_FAN_CTRL EEEPC_EC "SFB3" /* Byte containing SF25 */ |
| #define EEEPC_EC_SFB3 0xD3 |
| |
| /* |
| * This is the main structure, we can use it to store useful information |
| * about the hotk device |
| */ |
| struct eeepc_hotk { |
| struct acpi_device *device; /* the device we are in */ |
| acpi_handle handle; /* the handle of the hotk device */ |
| u32 cm_supported; /* the control methods supported |
| by this BIOS */ |
| uint init_flag; /* Init flags */ |
| u16 event_count[128]; /* count for each event */ |
| struct input_dev *inputdev; |
| u16 *keycode_map; |
| struct rfkill *wlan_rfkill; |
| struct rfkill *bluetooth_rfkill; |
| struct rfkill *wwan3g_rfkill; |
| struct hotplug_slot *hotplug_slot; |
| struct work_struct hotplug_work; |
| }; |
| |
| /* The actual device the driver binds to */ |
| static struct eeepc_hotk *ehotk; |
| |
| /* Platform device/driver */ |
| static struct platform_driver platform_driver = { |
| .driver = { |
| .name = EEEPC_HOTK_FILE, |
| .owner = THIS_MODULE, |
| } |
| }; |
| |
| static struct platform_device *platform_device; |
| |
| struct key_entry { |
| char type; |
| u8 code; |
| u16 keycode; |
| }; |
| |
| enum { KE_KEY, KE_END }; |
| |
| static struct key_entry eeepc_keymap[] = { |
| /* Sleep already handled via generic ACPI code */ |
| {KE_KEY, 0x10, KEY_WLAN }, |
| {KE_KEY, 0x11, KEY_WLAN }, |
| {KE_KEY, 0x12, KEY_PROG1 }, |
| {KE_KEY, 0x13, KEY_MUTE }, |
| {KE_KEY, 0x14, KEY_VOLUMEDOWN }, |
| {KE_KEY, 0x15, KEY_VOLUMEUP }, |
| {KE_KEY, 0x1a, KEY_COFFEE }, |
| {KE_KEY, 0x1b, KEY_ZOOM }, |
| {KE_KEY, 0x1c, KEY_PROG2 }, |
| {KE_KEY, 0x1d, KEY_PROG3 }, |
| {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, |
| {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP }, |
| {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, |
| {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, |
| {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, |
| {KE_END, 0}, |
| }; |
| |
| /* |
| * The hotkey driver declaration |
| */ |
| static int eeepc_hotk_add(struct acpi_device *device); |
| static int eeepc_hotk_remove(struct acpi_device *device, int type); |
| static int eeepc_hotk_resume(struct acpi_device *device); |
| static void eeepc_hotk_notify(struct acpi_device *device, u32 event); |
| |
| static const struct acpi_device_id eeepc_device_ids[] = { |
| {EEEPC_HOTK_HID, 0}, |
| {"", 0}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, eeepc_device_ids); |
| |
| static struct acpi_driver eeepc_hotk_driver = { |
| .name = EEEPC_HOTK_NAME, |
| .class = EEEPC_HOTK_CLASS, |
| .ids = eeepc_device_ids, |
| .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, |
| .ops = { |
| .add = eeepc_hotk_add, |
| .remove = eeepc_hotk_remove, |
| .resume = eeepc_hotk_resume, |
| .notify = eeepc_hotk_notify, |
| }, |
| }; |
| |
| /* PCI hotplug ops */ |
| static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value); |
| |
| static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { |
| .owner = THIS_MODULE, |
| .get_adapter_status = eeepc_get_adapter_status, |
| .get_power_status = eeepc_get_adapter_status, |
| }; |
| |
| /* The backlight device /sys/class/backlight */ |
| static struct backlight_device *eeepc_backlight_device; |
| |
| /* The hwmon device */ |
| static struct device *eeepc_hwmon_device; |
| |
| /* |
| * The backlight class declaration |
| */ |
| static int read_brightness(struct backlight_device *bd); |
| static int update_bl_status(struct backlight_device *bd); |
| static struct backlight_ops eeepcbl_ops = { |
| .get_brightness = read_brightness, |
| .update_status = update_bl_status, |
| }; |
| |
| MODULE_AUTHOR("Corentin Chary, Eric Cooper"); |
| MODULE_DESCRIPTION(EEEPC_HOTK_NAME); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * ACPI Helpers |
| */ |
| static int write_acpi_int(acpi_handle handle, const char *method, int val, |
| struct acpi_buffer *output) |
| { |
| struct acpi_object_list params; |
| union acpi_object in_obj; |
| acpi_status status; |
| |
| params.count = 1; |
| params.pointer = &in_obj; |
| in_obj.type = ACPI_TYPE_INTEGER; |
| in_obj.integer.value = val; |
| |
| status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); |
| return (status == AE_OK ? 0 : -1); |
| } |
| |
| static int read_acpi_int(acpi_handle handle, const char *method, int *val) |
| { |
| acpi_status status; |
| unsigned long long result; |
| |
| status = acpi_evaluate_integer(handle, (char *)method, NULL, &result); |
| if (ACPI_FAILURE(status)) { |
| *val = -1; |
| return -1; |
| } else { |
| *val = result; |
| return 0; |
| } |
| } |
| |
| static int set_acpi(int cm, int value) |
| { |
| if (ehotk->cm_supported & (0x1 << cm)) { |
| const char *method = cm_setv[cm]; |
| if (method == NULL) |
| return -ENODEV; |
| if (write_acpi_int(ehotk->handle, method, value, NULL)) |
| pr_warning("Error writing %s\n", method); |
| } |
| return 0; |
| } |
| |
| static int get_acpi(int cm) |
| { |
| int value = -ENODEV; |
| if ((ehotk->cm_supported & (0x1 << cm))) { |
| const char *method = cm_getv[cm]; |
| if (method == NULL) |
| return -ENODEV; |
| if (read_acpi_int(ehotk->handle, method, &value)) |
| pr_warning("Error reading %s\n", method); |
| } |
| return value; |
| } |
| |
| /* |
| * Backlight |
| */ |
| static int read_brightness(struct backlight_device *bd) |
| { |
| return get_acpi(CM_ASL_PANELBRIGHT); |
| } |
| |
| static int set_brightness(struct backlight_device *bd, int value) |
| { |
| value = max(0, min(15, value)); |
| return set_acpi(CM_ASL_PANELBRIGHT, value); |
| } |
| |
| static int update_bl_status(struct backlight_device *bd) |
| { |
| return set_brightness(bd, bd->props.brightness); |
| } |
| |
| /* |
| * Rfkill helpers |
| */ |
| |
| static bool eeepc_wlan_rfkill_blocked(void) |
| { |
| if (get_acpi(CM_ASL_WLAN) == 1) |
| return false; |
| return true; |
| } |
| |
| static int eeepc_rfkill_set(void *data, bool blocked) |
| { |
| unsigned long asl = (unsigned long)data; |
| return set_acpi(asl, !blocked); |
| } |
| |
| static const struct rfkill_ops eeepc_rfkill_ops = { |
| .set_block = eeepc_rfkill_set, |
| }; |
| |
| static void __init eeepc_enable_camera(void) |
| { |
| /* |
| * If the following call to set_acpi() fails, it's because there's no |
| * camera so we can ignore the error. |
| */ |
| set_acpi(CM_ASL_CAMERA, 1); |
| } |
| |
| /* |
| * Sys helpers |
| */ |
| static int parse_arg(const char *buf, unsigned long count, int *val) |
| { |
| if (!count) |
| return 0; |
| if (sscanf(buf, "%i", val) != 1) |
| return -EINVAL; |
| return count; |
| } |
| |
| static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) |
| { |
| int rv, value; |
| |
| rv = parse_arg(buf, count, &value); |
| if (rv > 0) |
| value = set_acpi(cm, value); |
| if (value < 0) |
| return value; |
| return rv; |
| } |
| |
| static ssize_t show_sys_acpi(int cm, char *buf) |
| { |
| int value = get_acpi(cm); |
| |
| if (value < 0) |
| return value; |
| return sprintf(buf, "%d\n", value); |
| } |
| |
| #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \ |
| static ssize_t show_##_name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| return show_sys_acpi(_cm, buf); \ |
| } \ |
| static ssize_t store_##_name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| return store_sys_acpi(_cm, buf, count); \ |
| } \ |
| static struct device_attribute dev_attr_##_name = { \ |
| .attr = { \ |
| .name = __stringify(_name), \ |
| .mode = 0644 }, \ |
| .show = show_##_name, \ |
| .store = store_##_name, \ |
| } |
| |
| EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); |
| EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); |
| EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); |
| |
| struct eeepc_cpufv { |
| int num; |
| int cur; |
| }; |
| |
| static int get_cpufv(struct eeepc_cpufv *c) |
| { |
| c->cur = get_acpi(CM_ASL_CPUFV); |
| c->num = (c->cur >> 8) & 0xff; |
| c->cur &= 0xff; |
| if (c->cur < 0 || c->num <= 0 || c->num > 12) |
| return -ENODEV; |
| return 0; |
| } |
| |
| static ssize_t show_available_cpufv(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct eeepc_cpufv c; |
| int i; |
| ssize_t len = 0; |
| |
| if (get_cpufv(&c)) |
| return -ENODEV; |
| for (i = 0; i < c.num; i++) |
| len += sprintf(buf + len, "%d ", i); |
| len += sprintf(buf + len, "\n"); |
| return len; |
| } |
| |
| static ssize_t show_cpufv(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct eeepc_cpufv c; |
| |
| if (get_cpufv(&c)) |
| return -ENODEV; |
| return sprintf(buf, "%#x\n", (c.num << 8) | c.cur); |
| } |
| |
| static ssize_t store_cpufv(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct eeepc_cpufv c; |
| int rv, value; |
| |
| if (get_cpufv(&c)) |
| return -ENODEV; |
| rv = parse_arg(buf, count, &value); |
| if (rv < 0) |
| return rv; |
| if (!rv || value < 0 || value >= c.num) |
| return -EINVAL; |
| set_acpi(CM_ASL_CPUFV, value); |
| return rv; |
| } |
| |
| static struct device_attribute dev_attr_cpufv = { |
| .attr = { |
| .name = "cpufv", |
| .mode = 0644 }, |
| .show = show_cpufv, |
| .store = store_cpufv |
| }; |
| |
| static struct device_attribute dev_attr_available_cpufv = { |
| .attr = { |
| .name = "available_cpufv", |
| .mode = 0444 }, |
| .show = show_available_cpufv |
| }; |
| |
| static struct attribute *platform_attributes[] = { |
| &dev_attr_camera.attr, |
| &dev_attr_cardr.attr, |
| &dev_attr_disp.attr, |
| &dev_attr_cpufv.attr, |
| &dev_attr_available_cpufv.attr, |
| NULL |
| }; |
| |
| static struct attribute_group platform_attribute_group = { |
| .attrs = platform_attributes |
| }; |
| |
| /* |
| * Hotkey functions |
| */ |
| static struct key_entry *eepc_get_entry_by_scancode(int code) |
| { |
| struct key_entry *key; |
| |
| for (key = eeepc_keymap; key->type != KE_END; key++) |
| if (code == key->code) |
| return key; |
| |
| return NULL; |
| } |
| |
| static struct key_entry *eepc_get_entry_by_keycode(int code) |
| { |
| struct key_entry *key; |
| |
| for (key = eeepc_keymap; key->type != KE_END; key++) |
| if (code == key->keycode && key->type == KE_KEY) |
| return key; |
| |
| return NULL; |
| } |
| |
| static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) |
| { |
| struct key_entry *key = eepc_get_entry_by_scancode(scancode); |
| |
| if (key && key->type == KE_KEY) { |
| *keycode = key->keycode; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) |
| { |
| struct key_entry *key; |
| int old_keycode; |
| |
| if (keycode < 0 || keycode > KEY_MAX) |
| return -EINVAL; |
| |
| key = eepc_get_entry_by_scancode(scancode); |
| if (key && key->type == KE_KEY) { |
| old_keycode = key->keycode; |
| key->keycode = keycode; |
| set_bit(keycode, dev->keybit); |
| if (!eepc_get_entry_by_keycode(old_keycode)) |
| clear_bit(old_keycode, dev->keybit); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void cmsg_quirk(int cm, const char *name) |
| { |
| int dummy; |
| |
| /* Some BIOSes do not report cm although it is avaliable. |
| Check if cm_getv[cm] works and, if yes, assume cm should be set. */ |
| if (!(ehotk->cm_supported & (1 << cm)) |
| && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) { |
| pr_info("%s (%x) not reported by BIOS," |
| " enabling anyway\n", name, 1 << cm); |
| ehotk->cm_supported |= 1 << cm; |
| } |
| } |
| |
| static void cmsg_quirks(void) |
| { |
| cmsg_quirk(CM_ASL_LID, "LID"); |
| cmsg_quirk(CM_ASL_TYPE, "TYPE"); |
| cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER"); |
| cmsg_quirk(CM_ASL_TPD, "TPD"); |
| } |
| |
| static int eeepc_hotk_check(void) |
| { |
| const struct key_entry *key; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| int result; |
| |
| result = acpi_bus_get_status(ehotk->device); |
| if (result) |
| return result; |
| if (ehotk->device->status.present) { |
| if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, |
| &buffer)) { |
| pr_err("Hotkey initialization failed\n"); |
| return -ENODEV; |
| } else { |
| pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag); |
| } |
| /* get control methods supported */ |
| if (read_acpi_int(ehotk->handle, "CMSG" |
| , &ehotk->cm_supported)) { |
| pr_err("Get control methods supported failed\n"); |
| return -ENODEV; |
| } else { |
| cmsg_quirks(); |
| pr_info("Get control methods supported: 0x%x\n", |
| ehotk->cm_supported); |
| } |
| ehotk->inputdev = input_allocate_device(); |
| if (!ehotk->inputdev) { |
| pr_info("Unable to allocate input device\n"); |
| return 0; |
| } |
| ehotk->inputdev->name = "Asus EeePC extra buttons"; |
| ehotk->inputdev->phys = EEEPC_HOTK_FILE "/input0"; |
| ehotk->inputdev->id.bustype = BUS_HOST; |
| ehotk->inputdev->getkeycode = eeepc_getkeycode; |
| ehotk->inputdev->setkeycode = eeepc_setkeycode; |
| |
| for (key = eeepc_keymap; key->type != KE_END; key++) { |
| switch (key->type) { |
| case KE_KEY: |
| set_bit(EV_KEY, ehotk->inputdev->evbit); |
| set_bit(key->keycode, ehotk->inputdev->keybit); |
| break; |
| } |
| } |
| result = input_register_device(ehotk->inputdev); |
| if (result) { |
| pr_info("Unable to register input device\n"); |
| input_free_device(ehotk->inputdev); |
| return 0; |
| } |
| } else { |
| pr_err("Hotkey device not present, aborting\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int notify_brn(void) |
| { |
| /* returns the *previous* brightness, or -1 */ |
| struct backlight_device *bd = eeepc_backlight_device; |
| if (bd) { |
| int old = bd->props.brightness; |
| backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); |
| return old; |
| } |
| return -1; |
| } |
| |
| static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, |
| u8 *value) |
| { |
| int val = get_acpi(CM_ASL_WLAN); |
| |
| if (val == 1 || val == 0) |
| *value = val; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void eeepc_hotplug_work(struct work_struct *work) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *bus = pci_find_bus(0, 1); |
| bool blocked; |
| |
| if (!bus) { |
| pr_warning("Unable to find PCI bus 1?\n"); |
| return; |
| } |
| |
| blocked = eeepc_wlan_rfkill_blocked(); |
| if (!blocked) { |
| dev = pci_get_slot(bus, 0); |
| if (dev) { |
| /* Device already present */ |
| pci_dev_put(dev); |
| return; |
| } |
| dev = pci_scan_single_device(bus, 0); |
| if (dev) { |
| pci_bus_assign_resources(bus); |
| if (pci_bus_add_device(dev)) |
| pr_err("Unable to hotplug wifi\n"); |
| } |
| } else { |
| dev = pci_get_slot(bus, 0); |
| if (dev) { |
| pci_remove_bus_device(dev); |
| pci_dev_put(dev); |
| } |
| } |
| |
| rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); |
| } |
| |
| static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) |
| { |
| if (event != ACPI_NOTIFY_BUS_CHECK) |
| return; |
| |
| schedule_work(&ehotk->hotplug_work); |
| } |
| |
| static void eeepc_hotk_notify(struct acpi_device *device, u32 event) |
| { |
| static struct key_entry *key; |
| u16 count; |
| int brn = -ENODEV; |
| |
| if (!ehotk) |
| return; |
| if (event > ACPI_MAX_SYS_NOTIFY) |
| return; |
| if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) |
| brn = notify_brn(); |
| count = ehotk->event_count[event % 128]++; |
| acpi_bus_generate_proc_event(ehotk->device, event, count); |
| acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, |
| dev_name(&ehotk->device->dev), event, |
| count); |
| if (ehotk->inputdev) { |
| if (brn != -ENODEV) { |
| /* brightness-change events need special |
| * handling for conversion to key events |
| */ |
| if (brn < 0) |
| brn = event; |
| else |
| brn += NOTIFY_BRN_MIN; |
| if (event < brn) |
| event = NOTIFY_BRN_MIN; /* brightness down */ |
| else if (event > brn) |
| event = NOTIFY_BRN_MIN + 2; /* ... up */ |
| else |
| event = NOTIFY_BRN_MIN + 1; /* ... unchanged */ |
| } |
| key = eepc_get_entry_by_scancode(event); |
| if (key) { |
| switch (key->type) { |
| case KE_KEY: |
| input_report_key(ehotk->inputdev, key->keycode, |
| 1); |
| input_sync(ehotk->inputdev); |
| input_report_key(ehotk->inputdev, key->keycode, |
| 0); |
| input_sync(ehotk->inputdev); |
| break; |
| } |
| } |
| } |
| } |
| |
| static int eeepc_register_rfkill_notifier(char *node) |
| { |
| acpi_status status = AE_OK; |
| acpi_handle handle; |
| |
| status = acpi_get_handle(NULL, node, &handle); |
| |
| if (ACPI_SUCCESS(status)) { |
| status = acpi_install_notify_handler(handle, |
| ACPI_SYSTEM_NOTIFY, |
| eeepc_rfkill_notify, |
| NULL); |
| if (ACPI_FAILURE(status)) |
| pr_warning("Failed to register notify on %s\n", node); |
| } else |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static void eeepc_unregister_rfkill_notifier(char *node) |
| { |
| acpi_status status = AE_OK; |
| acpi_handle handle; |
| |
| status = acpi_get_handle(NULL, node, &handle); |
| |
| if (ACPI_SUCCESS(status)) { |
| status = acpi_remove_notify_handler(handle, |
| ACPI_SYSTEM_NOTIFY, |
| eeepc_rfkill_notify); |
| if (ACPI_FAILURE(status)) |
| pr_err("Error removing rfkill notify handler %s\n", |
| node); |
| } |
| } |
| |
| static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot) |
| { |
| kfree(hotplug_slot->info); |
| kfree(hotplug_slot); |
| } |
| |
| static int eeepc_setup_pci_hotplug(void) |
| { |
| int ret = -ENOMEM; |
| struct pci_bus *bus = pci_find_bus(0, 1); |
| |
| if (!bus) { |
| pr_err("Unable to find wifi PCI bus\n"); |
| return -ENODEV; |
| } |
| |
| ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); |
| if (!ehotk->hotplug_slot) |
| goto error_slot; |
| |
| ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), |
| GFP_KERNEL); |
| if (!ehotk->hotplug_slot->info) |
| goto error_info; |
| |
| ehotk->hotplug_slot->private = ehotk; |
| ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; |
| ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops; |
| eeepc_get_adapter_status(ehotk->hotplug_slot, |
| &ehotk->hotplug_slot->info->adapter_status); |
| |
| ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); |
| if (ret) { |
| pr_err("Unable to register hotplug slot - %d\n", ret); |
| goto error_register; |
| } |
| |
| return 0; |
| |
| error_register: |
| kfree(ehotk->hotplug_slot->info); |
| error_info: |
| kfree(ehotk->hotplug_slot); |
| ehotk->hotplug_slot = NULL; |
| error_slot: |
| return ret; |
| } |
| |
| static int eeepc_hotk_add(struct acpi_device *device) |
| { |
| int result; |
| |
| if (!device) |
| return -EINVAL; |
| pr_notice(EEEPC_HOTK_NAME "\n"); |
| ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); |
| if (!ehotk) |
| return -ENOMEM; |
| ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH; |
| ehotk->handle = device->handle; |
| strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME); |
| strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS); |
| device->driver_data = ehotk; |
| ehotk->device = device; |
| result = eeepc_hotk_check(); |
| if (result) |
| goto ehotk_fail; |
| |
| return 0; |
| |
| ehotk_fail: |
| kfree(ehotk); |
| ehotk = NULL; |
| |
| return result; |
| } |
| |
| static int eeepc_hotk_remove(struct acpi_device *device, int type) |
| { |
| if (!device || !acpi_driver_data(device)) |
| return -EINVAL; |
| |
| kfree(ehotk); |
| return 0; |
| } |
| |
| static int eeepc_hotk_resume(struct acpi_device *device) |
| { |
| if (ehotk->wlan_rfkill) { |
| bool wlan; |
| |
| /* Workaround - it seems that _PTS disables the wireless |
| without notification or changing the value read by WLAN. |
| Normally this is fine because the correct value is restored |
| from the non-volatile storage on resume, but we need to do |
| it ourself if case suspend is aborted, or we lose wireless. |
| */ |
| wlan = get_acpi(CM_ASL_WLAN); |
| set_acpi(CM_ASL_WLAN, wlan); |
| |
| rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1); |
| |
| schedule_work(&ehotk->hotplug_work); |
| } |
| |
| if (ehotk->bluetooth_rfkill) |
| rfkill_set_sw_state(ehotk->bluetooth_rfkill, |
| get_acpi(CM_ASL_BLUETOOTH) != 1); |
| |
| return 0; |
| } |
| |
| /* |
| * Hwmon |
| */ |
| static int eeepc_get_fan_pwm(void) |
| { |
| int value = 0; |
| |
| read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value); |
| value = value * 255 / 100; |
| return (value); |
| } |
| |
| static void eeepc_set_fan_pwm(int value) |
| { |
| value = SENSORS_LIMIT(value, 0, 255); |
| value = value * 100 / 255; |
| ec_write(EEEPC_EC_SC02, value); |
| } |
| |
| static int eeepc_get_fan_rpm(void) |
| { |
| int high = 0; |
| int low = 0; |
| |
| read_acpi_int(NULL, EEEPC_EC_FAN_HRPM, &high); |
| read_acpi_int(NULL, EEEPC_EC_FAN_LRPM, &low); |
| return (high << 8 | low); |
| } |
| |
| static int eeepc_get_fan_ctrl(void) |
| { |
| int value = 0; |
| |
| read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); |
| return ((value & 0x02 ? 1 : 0)); |
| } |
| |
| static void eeepc_set_fan_ctrl(int manual) |
| { |
| int value = 0; |
| |
| read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); |
| if (manual) |
| value |= 0x02; |
| else |
| value &= ~0x02; |
| ec_write(EEEPC_EC_SFB3, value); |
| } |
| |
| static ssize_t store_sys_hwmon(void (*set)(int), const char *buf, size_t count) |
| { |
| int rv, value; |
| |
| rv = parse_arg(buf, count, &value); |
| if (rv > 0) |
| set(value); |
| return rv; |
| } |
| |
| static ssize_t show_sys_hwmon(int (*get)(void), char *buf) |
| { |
| return sprintf(buf, "%d\n", get()); |
| } |
| |
| #define EEEPC_CREATE_SENSOR_ATTR(_name, _mode, _set, _get) \ |
| static ssize_t show_##_name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| return show_sys_hwmon(_set, buf); \ |
| } \ |
| static ssize_t store_##_name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| return store_sys_hwmon(_get, buf, count); \ |
| } \ |
| static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0); |
| |
| EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL); |
| EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR, |
| eeepc_get_fan_pwm, eeepc_set_fan_pwm); |
| EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, |
| eeepc_get_fan_ctrl, eeepc_set_fan_ctrl); |
| |
| static ssize_t |
| show_name(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "eeepc\n"); |
| } |
| static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); |
| |
| static struct attribute *hwmon_attributes[] = { |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_name.dev_attr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group hwmon_attribute_group = { |
| .attrs = hwmon_attributes |
| }; |
| |
| /* |
| * exit/init |
| */ |
| static void eeepc_backlight_exit(void) |
| { |
| if (eeepc_backlight_device) |
| backlight_device_unregister(eeepc_backlight_device); |
| eeepc_backlight_device = NULL; |
| } |
| |
| static void eeepc_rfkill_exit(void) |
| { |
| eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); |
| eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); |
| if (ehotk->wlan_rfkill) |
| rfkill_unregister(ehotk->wlan_rfkill); |
| if (ehotk->bluetooth_rfkill) |
| rfkill_unregister(ehotk->bluetooth_rfkill); |
| if (ehotk->wwan3g_rfkill) |
| rfkill_unregister(ehotk->wwan3g_rfkill); |
| if (ehotk->hotplug_slot) |
| pci_hp_deregister(ehotk->hotplug_slot); |
| } |
| |
| static void eeepc_input_exit(void) |
| { |
| if (ehotk->inputdev) |
| input_unregister_device(ehotk->inputdev); |
| } |
| |
| static void eeepc_hwmon_exit(void) |
| { |
| struct device *hwmon; |
| |
| hwmon = eeepc_hwmon_device; |
| if (!hwmon) |
| return ; |
| sysfs_remove_group(&hwmon->kobj, |
| &hwmon_attribute_group); |
| hwmon_device_unregister(hwmon); |
| eeepc_hwmon_device = NULL; |
| } |
| |
| static void __exit eeepc_laptop_exit(void) |
| { |
| eeepc_backlight_exit(); |
| eeepc_rfkill_exit(); |
| eeepc_input_exit(); |
| eeepc_hwmon_exit(); |
| acpi_bus_unregister_driver(&eeepc_hotk_driver); |
| sysfs_remove_group(&platform_device->dev.kobj, |
| &platform_attribute_group); |
| platform_device_unregister(platform_device); |
| platform_driver_unregister(&platform_driver); |
| } |
| |
| static int eeepc_new_rfkill(struct rfkill **rfkill, |
| const char *name, struct device *dev, |
| enum rfkill_type type, int cm) |
| { |
| int result; |
| |
| result = get_acpi(cm); |
| if (result < 0) |
| return result; |
| |
| *rfkill = rfkill_alloc(name, dev, type, |
| &eeepc_rfkill_ops, (void *)(unsigned long)cm); |
| |
| if (!*rfkill) |
| return -EINVAL; |
| |
| rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1); |
| result = rfkill_register(*rfkill); |
| if (result) { |
| rfkill_destroy(*rfkill); |
| *rfkill = NULL; |
| return result; |
| } |
| return 0; |
| } |
| |
| |
| static int eeepc_rfkill_init(struct device *dev) |
| { |
| int result = 0; |
| |
| INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work); |
| |
| eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); |
| eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); |
| |
| result = eeepc_new_rfkill(&ehotk->wlan_rfkill, |
| "eeepc-wlan", dev, |
| RFKILL_TYPE_WLAN, CM_ASL_WLAN); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill, |
| "eeepc-bluetooth", dev, |
| RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill, |
| "eeepc-wwan3g", dev, |
| RFKILL_TYPE_WWAN, CM_ASL_3G); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = eeepc_setup_pci_hotplug(); |
| /* |
| * If we get -EBUSY then something else is handling the PCI hotplug - |
| * don't fail in this case |
| */ |
| if (result == -EBUSY) |
| result = 0; |
| |
| exit: |
| if (result && result != -ENODEV) |
| eeepc_rfkill_exit(); |
| return result; |
| } |
| |
| static int eeepc_backlight_init(struct device *dev) |
| { |
| struct backlight_device *bd; |
| |
| bd = backlight_device_register(EEEPC_HOTK_FILE, dev, |
| NULL, &eeepcbl_ops); |
| if (IS_ERR(bd)) { |
| pr_err("Could not register eeepc backlight device\n"); |
| eeepc_backlight_device = NULL; |
| return PTR_ERR(bd); |
| } |
| eeepc_backlight_device = bd; |
| bd->props.max_brightness = 15; |
| bd->props.brightness = read_brightness(NULL); |
| bd->props.power = FB_BLANK_UNBLANK; |
| backlight_update_status(bd); |
| return 0; |
| } |
| |
| static int eeepc_hwmon_init(struct device *dev) |
| { |
| struct device *hwmon; |
| int result; |
| |
| hwmon = hwmon_device_register(dev); |
| if (IS_ERR(hwmon)) { |
| pr_err("Could not register eeepc hwmon device\n"); |
| eeepc_hwmon_device = NULL; |
| return PTR_ERR(hwmon); |
| } |
| eeepc_hwmon_device = hwmon; |
| result = sysfs_create_group(&hwmon->kobj, |
| &hwmon_attribute_group); |
| if (result) |
| eeepc_hwmon_exit(); |
| return result; |
| } |
| |
| static int __init eeepc_laptop_init(void) |
| { |
| struct device *dev; |
| int result; |
| |
| if (acpi_disabled) |
| return -ENODEV; |
| result = acpi_bus_register_driver(&eeepc_hotk_driver); |
| if (result < 0) |
| return result; |
| if (!ehotk) { |
| acpi_bus_unregister_driver(&eeepc_hotk_driver); |
| return -ENODEV; |
| } |
| |
| eeepc_enable_camera(); |
| |
| /* Register platform stuff */ |
| result = platform_driver_register(&platform_driver); |
| if (result) |
| goto fail_platform_driver; |
| platform_device = platform_device_alloc(EEEPC_HOTK_FILE, -1); |
| if (!platform_device) { |
| result = -ENOMEM; |
| goto fail_platform_device1; |
| } |
| result = platform_device_add(platform_device); |
| if (result) |
| goto fail_platform_device2; |
| result = sysfs_create_group(&platform_device->dev.kobj, |
| &platform_attribute_group); |
| if (result) |
| goto fail_sysfs; |
| |
| dev = &platform_device->dev; |
| |
| if (!acpi_video_backlight_support()) { |
| result = eeepc_backlight_init(dev); |
| if (result) |
| goto fail_backlight; |
| } else |
| pr_info("Backlight controlled by ACPI video " |
| "driver\n"); |
| |
| result = eeepc_hwmon_init(dev); |
| if (result) |
| goto fail_hwmon; |
| |
| result = eeepc_rfkill_init(dev); |
| if (result) |
| goto fail_rfkill; |
| |
| return 0; |
| fail_rfkill: |
| eeepc_hwmon_exit(); |
| fail_hwmon: |
| eeepc_backlight_exit(); |
| fail_backlight: |
| sysfs_remove_group(&platform_device->dev.kobj, |
| &platform_attribute_group); |
| fail_sysfs: |
| platform_device_del(platform_device); |
| fail_platform_device2: |
| platform_device_put(platform_device); |
| fail_platform_device1: |
| platform_driver_unregister(&platform_driver); |
| fail_platform_driver: |
| eeepc_input_exit(); |
| return result; |
| } |
| |
| module_init(eeepc_laptop_init); |
| module_exit(eeepc_laptop_exit); |