blob: 1cc3e61a572f22d1a175b1054dd10bf7426eb282 [file] [log] [blame]
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&soc {
serial@f991e000 {
status = "ok";
};
i2c@f9923000{
atmel_mxt_ts@4a {
compatible = "atmel,mxt-ts";
reg = <0x4a>;
interrupt-parent = <&msmgpio>;
interrupts = <1 0x2>;
vdd_ana-supply = <&pm8110_l19>;
vcc_i2c-supply = <&pm8110_l14>;
atmel,reset-gpio = <&msmgpio 0 0x00>;
atmel,irq-gpio = <&msmgpio 1 0x00>;
atmel,panel-coords = <0 0 508 880>;
atmel,display-coords = <0 0 480 800>;
atmel,i2c-pull-up;
atmel,no-force-update;
atmel,no-lpm-support;
atmel,cfg_1 {
atmel,family-id = <0x81>;
atmel,variant-id = <0x15>;
atmel,version = <0x11>;
atmel,build = <0xaa>;
atmel,config = [
/* Object 6, Instance = 0 */
00 00 00 00 00 00
/* Object 38, Instance = 0 */
1D 03 00 1E 07 0D 00 00
/* Object 7, Instance = 0 */
20 08 32
/* Object 8, Instance = 0 */
19 00 14 14 FF 00 FF 00 00 00
/* Object 9, Instance = 0 */
83 00 00 13 0B 00 20 32 01 03
00 32 05 30 0A 05 0A 00 70 03
FC 01 04 2F F8 DC 00 00 40 00
00 0A 00 00 02
/* Object 18, Instance = 0 */
00 00
/* Object 19, Instance = 0 */
00 00 00 00 00 00
/* Object 25, Instance = 0 */
03 00 18 79 A8 61
/* Object 58, Instance = 0 */
00 00 00 00 00 00 00 00 00 00
00
/* Object 42, Instance = 0 */
00 00 00 00 00 00 00 00
/* Object 46, Instance = 0 */
04 03 08 10 00 00 00 00 00
/* Object 47, Instance = 0 */
00 00 00 00 00 00 00 00 00 00
/* Object 48, Instance = 0 */
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00
/* Object 55, Instance = 0 */
00 00 00 00
];
};
};
};
i2c@f9925000 {
mpu3050@68 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
reg = <0x68>;
compatible = "invn,mpu3050";
interrupt-parent = <&msmgpio>;
interrupts = <84 0x2>;
vlogic-supply = <&pm8110_l14>;
vdd-supply = <&pm8110_l19>;
invn,gpio-int = <&msmgpio 84 0x2>;
invn,gpio-en = <&pm8110_gpios 2 0x2>;
invn,poll-interval = <200>;
};
bmp180@77 {
reg = <0x77>;
compatible = "bosch,bmp18x";
vdd-supply = <&pm8110_l19>;
vddio-supply = <&pm8110_l14>;
bosch,chip-id = <0x55>;
bosch,oversample = <3>;
bosch,period = <1000>;
};
mma8x5x@1d {
reg = <0x1d>;
compatible = "fsl,mma8x5x";
interrupt-parent = <&msmgpio>;
interrupts = <81 0x2>;
vdd-supply = <&pm8110_l19>;
vio-supply = <&pm8110_l14>;
fsl,irq-gpio = <&msmgpio 81 0x00>;
fsl,sensors-position = <5>;
};
capella@60 {
compatible = "capella,cm36283";
reg = <0x60>;
interrupt-parent = <&msmgpio>;
interrupts = <80 0x2>;
vdd-supply = <&pm8110_l19>;
vio-supply = <&pm8110_l14>;
capella,use-polling;
capella,interrupt-gpio = <&msmgpio 80 0x2>;
capella,levels = <0x0A 0xA0 0xE1 0x140 0x280 0x500 0xA28 0x16A8 0x1F40
0x2800>;
capella,ps_close_thd_set = <0xa>;
capella,ps_away_thd_set = <0x5>;
capella,ls_cmd = <0x44>; /* PS_IT=160ms, INT_PERS=2*/
capella,ps_conf1_val = <0x0006>;
capella,ps_conf3_val = <0x3010>;
};
};
gen-vkeys {
compatible = "qcom,gen-vkeys";
label = "atmel_mxt_ts";
qcom,disp-maxx = <480>;
qcom,disp-maxy = <800>;
qcom,panel-maxx = <508>;
qcom,panel-maxy = <880>;
qcom,key-codes = <158 102 139>;
qcom,y-offset = <35>;
};
gpio_keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
camera_snapshot {
label = "camera_snapshot";
gpios = <&msmgpio 73 0x1>;
linux,input-type = <1>;
linux,code = <0x2fe>;
gpio-key,wakeup;
debounce-interval = <15>;
};
camera_focus {
label = "camera_focus";
gpios = <&msmgpio 74 0x1>;
linux,input-type = <1>;
linux,code = <0x210>;
gpio-key,wakeup;
debounce-interval = <15>;
};
vol_up {
label = "volume_up";
gpios = <&msmgpio 72 0x1>;
linux,input-type = <1>;
linux,code = <115>;
gpio-key,wakeup;
debounce-interval = <15>;
};
};
sound {
qcom,audio-routing =
"RX_BIAS", "MCLK",
"INT_LDO_H", "MCLK",
"MIC BIAS External", "Handset Mic",
"MIC BIAS Internal2", "Headset Mic",
"MIC BIAS External", "Secondary Mic",
"AMIC1", "MIC BIAS External",
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External";
};
};
&i2c_cdc {
msm8x10_wcd_codec@0d{
compatible = "qcom,msm8x10-wcd-i2c";
reg = <0x0d>;
interrupt-parent = <&wcd9xxx_intc>;
interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23>;
cdc-vdda-cp-supply = <&pm8110_s4>;
qcom,cdc-vdda-cp-voltage = <1800000 2150000>;
qcom,cdc-vdda-cp-current = <650000>;
cdc-vdda-h-supply = <&pm8110_l6>;
qcom,cdc-vdda-h-voltage = <1800000 1800000>;
qcom,cdc-vdda-h-current = <25000>;
cdc-vdd-px-supply = <&pm8110_l6>;
qcom,cdc-vdd-px-voltage = <1800000 1800000>;
qcom,cdc-vdd-px-current = <10000>;
cdc-vdd-1p2v-supply = <&pm8110_l4>;
qcom,cdc-vdd-1p2v-voltage = <1200000 1200000>;
qcom,cdc-vdd-1p2v-current = <5000>;
cdc-vdd-mic-bias-supply = <&pm8110_l20>;
qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>;
qcom,cdc-vdd-mic-bias-current = <25000>;
qcom,cdc-micbias-cfilt-sel = <0x0>;
qcom,cdc-micbias-cfilt-mv = <1800000>;
qcom,cdc-mclk-clk-rate = <12288000>;
qcom,cdc-static-supplies = "cdc-vdda-h",
"cdc-vdd-px",
"cdc-vdd-1p2v";
qcom,cdc-on-demand-supplies = "cdc-vdda-cp",
"cdc-vdd-mic-bias";
qcom,cdc-micbias1-ext-cap;
};
msm8x10_wcd_codec@77{
compatible = "qcom,msm8x10-wcd-i2c";
reg = <0x77>;
};
msm8x10_wcd_codec@66{
compatible = "qcom,msm8x10-wcd-i2c";
reg = <0x66>;
};
msm8x10_wcd_codec@55{
compatible = "qcom,msm8x10-wcd-i2c";
reg = <0x55>;
};
};
&spmi_bus {
qcom,pm8110@0 {
qcom,leds@a100 {
status = "okay";
qcom,led_mpp_2 {
label = "mpp";
linux,name = "button-backlight";
linux-default-trigger = "hr-trigger";
qcom,default-state = "off";
qcom,max-current = <40>;
qcom,id = <6>;
qcom,source-sel = <1>;
qcom,mode-ctrl = <0x60>;
qcom,mode = "manual";
};
};
qcom,leds@a200 {
status = "okay";
qcom,led_mpp_3 {
label = "mpp";
linux,name = "wled-backlight";
linux,default-trigger = "bkl-trigger";
qcom,default-state = "on";
qcom,max-current = <40>;
qcom,id = <6>;
qcom,source-sel = <8>;
qcom,mode-ctrl = <0x10>;
qcom,pwm-channel = <0>;
qcom,pwm-us = <27>;
qcom,vin-ctrl = <0x03>;
qcom,mode = "pwm";
};
};
};
};
&spmi_bus {
qcom,pm8110@1 {
qcom,vibrator@c000 {
status = "okay";
qcom,vib-timeout-ms = <15000>;
qcom,vib-vtg-level-mV = <3100>;
};
};
};
&sdhc_1 {
vdd-supply = <&pm8110_l17>;
qcom,vdd-voltage-level = <2900000 2900000>;
qcom,vdd-current-level = <200 400000>;
vdd-io-supply = <&pm8110_l6>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <200 60000>;
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
qcom,nonremovable;
status = "ok";
};
&sdhc_2 {
vdd-supply = <&pm8110_l18>;
qcom,vdd-voltage-level = <2950000 2950000>;
qcom,vdd-current-level = <15000 400000>;
vdd-io-supply = <&pm8110_l21>;
qcom,vdd-io-voltage-level = <1800000 2950000>;
qcom,vdd-io-current-level = <200 50000>;
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
#address-cells = <0>;
interrupt-parent = <&sdhc_2>;
interrupts = <0 1 2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xffffffff>;
interrupt-map = <0 &intc 0 125 0
1 &intc 0 221 0
2 &msmgpio 42 0x3>;
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
cd-gpios = <&msmgpio 42 0x1>;
status = "ok";
};
&pm8110_chg {
status = "ok";
qcom,charging-disabled;
qcom,chgr@1000 {
status = "ok";
};
qcom,buck@1100 {
status = "ok";
};
qcom,bat-if@1200 {
status = "ok";
};
qcom,usb-chgpth@1300 {
status = "ok";
};
qcom,chg-misc@1600 {
status = "ok";
};
};
&pm8110_gpios {
gpio@c000 { /* GPIO 1 */
};
gpio@c100 { /* GPIO 2 */
};
gpio@c200 { /* GPIO 3 */
};
gpio@c300 { /* GPIO 4 */
};
};
&pm8110_mpps {
mpp@a000 { /* MPP 1 */
};
mpp@a100 { /* MPP 2 */
status = "disabled";
};
mpp@a200 { /* MPP 3 */
status = "disabled";
};
mpp@a300 { /* MPP 4 */
/* PA_THERM config */
qcom,mode = <4>; /* AIN input */
qcom,invert = <1>; /* Enable MPP */
qcom,ain-route = <3>; /* AMUX 8 */
qcom,master-en = <1>;
qcom,src-sel = <0>; /* Function constant */
};
};
&pm8110_bms {
status = "ok";
};
&mdss_mdp {
qcom,mdss-pref-prim-intf = "dsi";
};
&mdss_dsi0 {
qcom,dsi-pref-prim-pan = <&dsi_truly_wvga_vid>;
};
&dsi_truly_wvga_vid {
qcom,cont-splash-enabled;
};
&dsi_truly_wvga_cmd {
qcom,cont-splash-enabled;
};